Message ID | 1453793566-31363-2-git-send-email-sean.nyekjaer@prevas.dk |
---|---|
State | New |
Headers | show |
On Tue, Jan 26, 2016 at 08:32:46AM +0100, Sean Nyekjaer wrote: > Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk> > --- > Changes since v4: > - Added description, required properties > - Tested and added support for gpio polarity > - Added vendor prefix to compatible flags > > Changes since v3: > - Added gpio-controller and gpio cells flags > > .../devicetree/bindings/gpio/gpio-sn65hvs885.txt | 20 ++++++++++++++++++++ > 1 file changed, 20 insertions(+) > create mode 100644 Documentation/devicetree/bindings/gpio/gpio-sn65hvs885.txt This looks fine, but I just realized this is the same thing as this[1]. Please coordinate these bindings. Rob [1] https://lkml.org/lkml/2016/1/25/781 > > diff --git a/Documentation/devicetree/bindings/gpio/gpio-sn65hvs885.txt b/Documentation/devicetree/bindings/gpio/gpio-sn65hvs885.txt > new file mode 100644 > index 0000000..c9b3592 > --- /dev/null > +++ b/Documentation/devicetree/bindings/gpio/gpio-sn65hvs885.txt > @@ -0,0 +1,20 @@ > +* TI SN65HVS885 digital-input serializer > + > +Required properties: > +- compatible : Should be "ti,sn65hvs885" > +- reg : chip select number > +- gpio-controller : Marks the device node as a gpio controller. > +- #gpio-cells : Should be two. The first cell is the pin number and > + the second cell is used to specify the gpio polarity: > + 0 = active high > + 1 = active low > + > +Example: > +sn65hvs885@3 { > + compatible = "ti,sn65hvs885"; > + spi-max-frequency = <10000000>; > + latch-gpio = <&gpio4 1 GPIO_ACTIVE_HIGH>; > + reg = <0>; > + gpio-controller; > + #gpio-cells = <2>; > +}; > -- > 2.7.0 > > -- > To unsubscribe from this list: send the line "unsubscribe devicetree" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 2016-01-29 03:43, Rob Herring wrote: > On Tue, Jan 26, 2016 at 08:32:46AM +0100, Sean Nyekjaer wrote: >> Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk> >> --- >> Changes since v4: >> - Added description, required properties >> - Tested and added support for gpio polarity >> - Added vendor prefix to compatible flags >> >> Changes since v3: >> - Added gpio-controller and gpio cells flags >> >> .../devicetree/bindings/gpio/gpio-sn65hvs885.txt | 20 ++++++++++++++++++++ >> 1 file changed, 20 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/gpio/gpio-sn65hvs885.txt > This looks fine, but I just realized this is the same thing as this[1]. > Please coordinate these bindings. > > Rob > > [1] https://lkml.org/lkml/2016/1/25/781 I'll just leave this and comment on the other patch :-) /Sean > >> diff --git a/Documentation/devicetree/bindings/gpio/gpio-sn65hvs885.txt b/Documentation/devicetree/bindings/gpio/gpio-sn65hvs885.txt >> new file mode 100644 >> index 0000000..c9b3592 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/gpio/gpio-sn65hvs885.txt >> @@ -0,0 +1,20 @@ >> +* TI SN65HVS885 digital-input serializer >> + >> +Required properties: >> +- compatible : Should be "ti,sn65hvs885" >> +- reg : chip select number >> +- gpio-controller : Marks the device node as a gpio controller. >> +- #gpio-cells : Should be two. The first cell is the pin number and >> + the second cell is used to specify the gpio polarity: >> + 0 = active high >> + 1 = active low >> + >> +Example: >> +sn65hvs885@3 { >> + compatible = "ti,sn65hvs885"; >> + spi-max-frequency = <10000000>; >> + latch-gpio = <&gpio4 1 GPIO_ACTIVE_HIGH>; >> + reg = <0>; >> + gpio-controller; >> + #gpio-cells = <2>; >> +}; >> -- >> 2.7.0 >> >> -- >> To unsubscribe from this list: send the line "unsubscribe devicetree" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/gpio/gpio-sn65hvs885.txt b/Documentation/devicetree/bindings/gpio/gpio-sn65hvs885.txt new file mode 100644 index 0000000..c9b3592 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-sn65hvs885.txt @@ -0,0 +1,20 @@ +* TI SN65HVS885 digital-input serializer + +Required properties: +- compatible : Should be "ti,sn65hvs885" +- reg : chip select number +- gpio-controller : Marks the device node as a gpio controller. +- #gpio-cells : Should be two. The first cell is the pin number and + the second cell is used to specify the gpio polarity: + 0 = active high + 1 = active low + +Example: +sn65hvs885@3 { + compatible = "ti,sn65hvs885"; + spi-max-frequency = <10000000>; + latch-gpio = <&gpio4 1 GPIO_ACTIVE_HIGH>; + reg = <0>; + gpio-controller; + #gpio-cells = <2>; +};
Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk> --- Changes since v4: - Added description, required properties - Tested and added support for gpio polarity - Added vendor prefix to compatible flags Changes since v3: - Added gpio-controller and gpio cells flags .../devicetree/bindings/gpio/gpio-sn65hvs885.txt | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-sn65hvs885.txt