diff mbox

[v6,10/11] arm: dts: add imx7d-sdb support

Message ID 1429652610-25265-11-git-send-email-Frank.Li@freescale.com
State New
Headers show

Commit Message

Frank Li April 21, 2015, 9:43 p.m. UTC
From: Frank Li <Frank.Li@freescale.com>

add imx7d sdb board support

Signed-off-by: Frank Li <Frank.Li@freescale.com>
---
 arch/arm/boot/dts/Makefile      |   2 +
 arch/arm/boot/dts/imx7d-sdb.dts | 439 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 441 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx7d-sdb.dts
diff mbox

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index a71d3c7..e062934 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -313,6 +313,8 @@  dtb-$(CONFIG_SOC_IMX6SX) += \
 	imx6sx-sabreauto.dtb \
 	imx6sx-sdb-reva.dtb \
 	imx6sx-sdb.dtb
+dtb-$(CONFIG_SOC_IMX7D) += \
+	imx7d-sdb.dtb
 dtb-$(CONFIG_SOC_LS1021A) += \
 	ls1021a-qds.dtb \
 	ls1021a-twr.dtb
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
new file mode 100644
index 0000000..d8ce3aa
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -0,0 +1,439 @@ 
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "imx7d.dtsi"
+
+/ {
+	model = "Freescale i.MX7 SabreSD Board";
+	compatible = "fsl,imx7d-sdb", "fsl,imx7d";
+
+	memory {
+		reg = <0x80000000 0x80000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb_otg1_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb_otg1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb_otg2_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_otg2_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_can2_3v3: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "can2-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+
+		reg_vref_1v8: regulator@3 {
+			compatible = "regulator-fixed";
+			regulator-name = "vref-1v8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		wlreg_on: fixedregulator@100 {
+			compatible = "regulator-fixed";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-name = "wlreg_on";
+			gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+};
+
+&cpu0 {
+	arm-supply = <&sw1a_reg>;
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pfuze3000@08 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			/* use sw1c_reg to align with pfuze100/pfuze200 */
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	codec: wm8960@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clock-names = "mclk";
+		wlf,shared-lrclk;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_1>;
+
+	imx7d-sdb {
+		pinctrl_hog_1: hoggrp-1 {
+			fsl,pins = <
+				MX7D_PAD_UART3_CTS_B__GPIO4_IO7	0x14
+				MX7D_PAD_ECSPI2_SS0__GPIO4_IO23	 0x34  /* bt reg on */
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX7D_PAD_I2C1_SDA__I2C1_SDA	0x4000007f
+				MX7D_PAD_I2C1_SCL__I2C1_SCL	0x4000007f
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX7D_PAD_I2C2_SDA__I2C2_SDA	0x4000007f
+				MX7D_PAD_I2C2_SCL__I2C2_SCL	0x4000007f
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX7D_PAD_I2C3_SDA__I2C3_SDA          0x4000007f
+				MX7D_PAD_I2C3_SCL__I2C3_SCL          0x4000007f
+			>;
+		};
+
+		pinctrl_i2c4: i2c4grp {
+			fsl,pins = <
+				MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA		0x4000007f
+				MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL		0x4000007f
+			>;
+		};
+
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
+				MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79
+			>;
+		};
+
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX7D_PAD_SAI1_TX_BCLK__UART5_DCE_TX 0x79
+				MX7D_PAD_SAI1_RX_DATA__UART5_DCE_RX 0x79
+				MX7D_PAD_SAI1_TX_SYNC__UART5_DCE_CTS 0x79
+				MX7D_PAD_SAI1_TX_DATA__UART5_DCE_RTS 0x79
+			>;
+		};
+
+		pinctrl_uart6: uart6grp {
+			fsl,pins = <
+				MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX 0x79
+				MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX 0x79
+				MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS 0x79
+				MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS 0x79
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				MX7D_PAD_SD1_CMD__SD1_CMD	0x59
+				MX7D_PAD_SD1_CLK__SD1_CLK	0x19
+				MX7D_PAD_SD1_DATA0__SD1_DATA0	0x59
+				MX7D_PAD_SD1_DATA1__SD1_DATA1	0x59
+				MX7D_PAD_SD1_DATA2__SD1_DATA2	0x59
+				MX7D_PAD_SD1_DATA3__SD1_DATA3	0x59
+				MX7D_PAD_SD1_CD_B__GPIO5_IO0	0x59 /* CD */
+				MX7D_PAD_SD1_WP__GPIO5_IO1	0x59 /* WP */
+				MX7D_PAD_SD1_RESET_B__GPIO5_IO2	0x59 /* vmmc */
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX7D_PAD_SD2_CMD__SD2_CMD       0x59
+				MX7D_PAD_SD2_CLK__SD2_CLK       0x19
+				MX7D_PAD_SD2_DATA0__SD2_DATA0   0x59
+				MX7D_PAD_SD2_DATA1__SD2_DATA1   0x59
+				MX7D_PAD_SD2_DATA2__SD2_DATA2   0x59
+				MX7D_PAD_SD2_DATA3__SD2_DATA3   0x59
+				MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21	0x59 /* WL_REG_ON */
+			>;
+		};
+
+		pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
+			fsl,pins = <
+				MX7D_PAD_SD2_CMD__SD2_CMD       0x5a
+				MX7D_PAD_SD2_CLK__SD2_CLK       0x1a
+				MX7D_PAD_SD2_DATA0__SD2_DATA0   0x5a
+				MX7D_PAD_SD2_DATA1__SD2_DATA1   0x5a
+				MX7D_PAD_SD2_DATA2__SD2_DATA2   0x5a
+				MX7D_PAD_SD2_DATA3__SD2_DATA3   0x5a
+			>;
+		};
+
+		pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {
+			fsl,pins = <
+				MX7D_PAD_SD2_CMD__SD2_CMD       0x5b
+				MX7D_PAD_SD2_CLK__SD2_CLK       0x1b
+				MX7D_PAD_SD2_DATA0__SD2_DATA0   0x5b
+				MX7D_PAD_SD2_DATA1__SD2_DATA1   0x5b
+				MX7D_PAD_SD2_DATA2__SD2_DATA2   0x5b
+				MX7D_PAD_SD2_DATA3__SD2_DATA3   0x5b
+			>;
+		};
+
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX7D_PAD_SD3_CMD__SD3_CMD	0x59
+				MX7D_PAD_SD3_CLK__SD3_CLK	0x19
+				MX7D_PAD_SD3_DATA0__SD3_DATA0	0x59
+				MX7D_PAD_SD3_DATA1__SD3_DATA1	0x59
+				MX7D_PAD_SD3_DATA2__SD3_DATA2	0x59
+				MX7D_PAD_SD3_DATA3__SD3_DATA3	0x59
+				MX7D_PAD_SD3_DATA4__SD3_DATA4	0x59
+				MX7D_PAD_SD3_DATA5__SD3_DATA5	0x59
+				MX7D_PAD_SD3_DATA6__SD3_DATA6	0x59
+				MX7D_PAD_SD3_DATA7__SD3_DATA7	0x59
+				MX7D_PAD_SD3_STROBE__SD3_STROBE	0x19
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+			fsl,pins = <
+				MX7D_PAD_SD3_CMD__SD3_CMD	0x5a
+				MX7D_PAD_SD3_CLK__SD3_CLK	0x1a
+				MX7D_PAD_SD3_DATA0__SD3_DATA0	0x5a
+				MX7D_PAD_SD3_DATA1__SD3_DATA1	0x5a
+				MX7D_PAD_SD3_DATA2__SD3_DATA2	0x5a
+				MX7D_PAD_SD3_DATA3__SD3_DATA3	0x5a
+				MX7D_PAD_SD3_DATA4__SD3_DATA4	0x5a
+				MX7D_PAD_SD3_DATA5__SD3_DATA5	0x5a
+				MX7D_PAD_SD3_DATA6__SD3_DATA6	0x5a
+				MX7D_PAD_SD3_DATA7__SD3_DATA7	0x5a
+				MX7D_PAD_SD3_STROBE__SD3_STROBE	0x1a
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+			fsl,pins = <
+				MX7D_PAD_SD3_CMD__SD3_CMD	0x5b
+				MX7D_PAD_SD3_CLK__SD3_CLK	0x1b
+				MX7D_PAD_SD3_DATA0__SD3_DATA0	0x5b
+				MX7D_PAD_SD3_DATA1__SD3_DATA1	0x5b
+				MX7D_PAD_SD3_DATA2__SD3_DATA2	0x5b
+				MX7D_PAD_SD3_DATA3__SD3_DATA3	0x5b
+				MX7D_PAD_SD3_DATA4__SD3_DATA4	0x5b
+				MX7D_PAD_SD3_DATA5__SD3_DATA5	0x5b
+				MX7D_PAD_SD3_DATA6__SD3_DATA6	0x5b
+				MX7D_PAD_SD3_DATA7__SD3_DATA7	0x5b
+				MX7D_PAD_SD3_STROBE__SD3_STROBE	0x1b
+			>;
+		};
+
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_2>;
+
+	imx7d-sdb {
+		pinctrl_hog_2: hoggrp-2 {
+			fsl,pins = <
+				MX7D_PAD_GPIO1_IO05__GPIO5_IO5	0x14
+				MX7D_PAD_GPIO1_IO07__GPIO1_IO7	0x59  /* CAN_STBY */
+			>;
+		};
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX7D_PAD_GPIO1_IO01__PWM1_OUT	0x110b0
+			>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio5 0 0>;
+	wp-gpios = <&gpio5 1 0>;
+	enable-sdio-wakeup;
+	keep-power-in-suspend;
+	status = "okay";
+};