From patchwork Fri Jan 30 10:04:00 2015 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Stanimir Varbanov X-Patchwork-Id: 434791 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id F3C6F1401AC for ; Fri, 30 Jan 2015 21:06:10 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1760312AbbA3KGK (ORCPT ); Fri, 30 Jan 2015 05:06:10 -0500 Received: from ns.mm-sol.com ([37.157.136.199]:60457 "EHLO extserv.mm-sol.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751737AbbA3KGH (ORCPT ); Fri, 30 Jan 2015 05:06:07 -0500 Received: from localhost.localdomain (unknown [37.157.136.206]) by extserv.mm-sol.com (Postfix) with ESMTPSA id E14BEC859; Fri, 30 Jan 2015 12:06:04 +0200 (EET) From: Stanimir Varbanov To: Linus Walleij , Rob Herring , Pawel Moll , Mark Rutland , Kumar Gala , Grant Likely , Ian Campbell Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, Bjorn Andersson , Joonwoo Park , Andy Gross , Stanimir Varbanov Subject: [PATCH v3 2/3] DT: pinctrl: Document Qualcomm MSM8916 pinctrl binding Date: Fri, 30 Jan 2015 12:04:00 +0200 Message-Id: <1422612241-12944-3-git-send-email-svarbanov@mm-sol.com> X-Mailer: git-send-email 1.7.0.4 In-Reply-To: <1422612241-12944-1-git-send-email-svarbanov@mm-sol.com> References: <1422612241-12944-1-git-send-email-svarbanov@mm-sol.com> Sender: linux-gpio-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-gpio@vger.kernel.org Adds devicetree binding documentation. Signed-off-by: Stanimir Varbanov Reviewed-by: Bjorn Andersson --- .../bindings/pinctrl/qcom,msm8916-pinctrl.txt | 186 ++++++++++++++++++++ 1 files changed, 186 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.txt diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.txt new file mode 100644 index 0000000..498caff --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.txt @@ -0,0 +1,186 @@ +Qualcomm MSM8916 TLMM block + +This binding describes the Top Level Mode Multiplexer block found in the +MSM8916 platform. + +- compatible: + Usage: required + Value type: + Definition: must be "qcom,msm8916-pinctrl" + +- reg: + Usage: required + Value type: + Definition: the base address and size of the TLMM register space. + +- interrupts: + Usage: required + Value type: + Definition: should specify the TLMM summary IRQ. + +- interrupt-controller: + Usage: required + Value type: + Definition: identifies this node as an interrupt controller + +- #interrupt-cells: + Usage: required + Value type: + Definition: must be 2. Specifying the pin number and flags, as defined + in + +- gpio-controller: + Usage: required + Value type: + Definition: identifies this node as a gpio controller + +- #gpio-cells: + Usage: required + Value type: + Definition: must be 2. Specifying the pin number and flags, as defined + in + +Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for +a general description of GPIO and interrupt bindings. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +The pin configuration nodes act as a container for an arbitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those pin(s)/group(s), and various pin configuration +parameters, such as pull-up, drive strength, etc. + + +PIN CONFIGURATION NODES: + +The name of each subnode is not important; all subnodes should be enumerated +and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. + + +The following generic properties as defined in pinctrl-bindings.txt are valid +to specify in a pin configuration subnode: + +- pins: + Usage: required + Value type: + Definition: List of gpio pins affected by the properties specified in + this subnode. Valid pins are: + gpio0-gpio121, + sdc1_clk, + sdc1_cmd, + sdc1_data + sdc2_clk, + sdc2_cmd, + sdc2_data, + qdsd_cmd, + qdsd_data0, + qdsd_data1, + qdsd_data2, + qdsd_data3 + +- function: + Usage: required + Value type: + Definition: Specify the alternative function to be configured for the + specified pins. Functions are only valid for gpio pins. + Valid values are: + adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, atest_char, atest_char0, + atest_char1, atest_char2, atest_char3, atest_combodac, atest_gpsadc0, + atest_gpsadc1, atest_tsens, atest_wlan0, atest_wlan1, backlight_en, + bimc_dte0,bimc_dte1, blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, + blsp_i2c5, blsp_i2c6, blsp_spi1, blsp_spi1_cs1, blsp_spi1_cs2, + blsp_spi1_cs3, blsp_spi2, blsp_spi2_cs1, blsp_spi2_cs2, blsp_spi2_cs3, + blsp_spi3, blsp_spi3_cs1, blsp_spi3_cs2, blsp_spi3_cs3, blsp_spi4, + blsp_spi5, blsp_spi6, blsp_uart1, blsp_uart2, blsp_uim1, blsp_uim2, + cam1_rst, cam1_standby, cam_mclk0, cam_mclk1, cci_async, cci_i2c, + cci_timer0, cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out, + display_5v, dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc, euro_us, + ext_lpass, flash_strobe, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a, + gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gpio, gsm0_tx0, gsm0_tx1, + gsm1_tx0, gsm1_tx1, gyro_accl, kpsns0, kpsns1, kpsns2, ldo_en, + ldo_update, mag_int, mdp_vsync, modem_tsync, m_voc, nav_pps, nav_tsync, + pa_indicator, pbs0, pbs1, pbs2, pri_mi2s, pri_mi2s_ws, prng_rosc, + pwr_crypto_enabled_a, pwr_crypto_enabled_b, pwr_modem_enabled_a, + pwr_modem_enabled_b, pwr_nav_enabled_a, pwr_nav_enabled_b, + qdss_ctitrig_in_a0, qdss_ctitrig_in_a1, qdss_ctitrig_in_b0, + qdss_ctitrig_in_b1, qdss_ctitrig_out_a0, qdss_ctitrig_out_a1, + qdss_ctitrig_out_b0, qdss_ctitrig_out_b1, qdss_traceclk_a, + qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a, + qdss_tracedata_b, reset_n, sd_card, sd_write, sec_mi2s, smb_int, + ssbi_wtr0, ssbi_wtr1, uim1, uim2, uim3, uim_batt, wcss_bt, wcss_fm, + wcss_wlan, webcam1_rst + +- bias-disable: + Usage: optional + Value type: + Definition: The specified pins should be configued as no pull. + +- bias-pull-down: + Usage: optional + Value type: + Definition: The specified pins should be configued as pull down. + +- bias-pull-up: + Usage: optional + Value type: + Definition: The specified pins should be configued as pull up. + +- output-high: + Usage: optional + Value type: + Definition: The specified pins are configured in output mode, driven + high. + Not valid for sdc pins. + +- output-low: + Usage: optional + Value type: + Definition: The specified pins are configured in output mode, driven + low. + Not valid for sdc pins. + +- drive-strength: + Usage: optional + Value type: + Definition: Selects the drive strength for the specified pins, in mA. + Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 + +Example: + + tlmm: pinctrl@1000000 { + compatible = "qcom,msm8916-pinctrl"; + reg = <0x1000000 0x300000>; + interrupts = <0 208 0>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + uart2: uart2-default { + mux { + pins = "gpio4", "gpio5"; + function = "blsp_uart2"; + }; + + tx { + pins = "gpio4"; + drive-strength = <4>; + bias-disable; + }; + + rx { + pins = "gpio5"; + drive-strength = <2>; + bias-pull-up; + }; + }; + };