@@ -1220,6 +1220,7 @@ config CPU_LOONGSON3
select CPU_SUPPORTS_HUGEPAGES
select WEAK_ORDERING
select WEAK_REORDERING_BEYOND_LLSC
+ select ARCH_REQUIRE_GPIOLIB
help
The Loongson 3 processor implements the MIPS64R2 instruction
set with many extensions.
@@ -243,6 +243,7 @@ CONFIG_HW_RANDOM=y
CONFIG_RAW_DRIVER=m
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_PIIX4=y
+CONFIG_GPIO_LOONGSON=y
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_W83627HF=m
@@ -453,10 +453,10 @@ config GPIO_GRGPIO
VHDL IP core library.
config GPIO_LOONGSON
- tristate "Loongson-2 GPIO support"
- depends on CPU_LOONGSON2
+ tristate "Loongson-2/3 GPIO support"
+ depends on CPU_LOONGSON2 || CPU_LOONGSON3
help
- driver for GPIO functionality on Loongson-2F processors.
+ driver for GPIO functionality on Loongson-2F/3A/3B processors.
config GPIO_TB10X
bool
@@ -1,8 +1,10 @@
/*
- * STLS2F GPIO Support
+ * Loongson-2F/3A/3B GPIO Support
*
* Copyright (c) 2008 Richard Liu, STMicroelectronics <richard.liu@st.com>
* Copyright (c) 2008-2010 Arnaud Patard <apatard@mandriva.com>
+ * Copyright (c) 2013 Hongbing Hu <huhb@lemote.com>
+ * Copyright (c) 2014 Huacai Chen <chenhc@lemote.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -20,7 +22,15 @@
#include <linux/gpio.h>
#define STLS2F_N_GPIO 4
-#define STLS2F_GPIO_IN_OFFSET 16
+#define STLS3A_N_GPIO 16
+
+#ifdef CONFIG_CPU_LOONGSON3
+#define LOONGSON_N_GPIO STLS3A_N_GPIO
+#else
+#define LOONGSON_N_GPIO STLS2F_N_GPIO
+#endif
+
+#define LOONGSON_GPIO_IN_OFFSET 16
static DEFINE_SPINLOCK(gpio_lock);
@@ -29,10 +39,10 @@ int gpio_get_value(unsigned gpio)
u32 val;
u32 mask;
- if (gpio >= STLS2F_N_GPIO)
+ if (gpio >= LOONGSON_N_GPIO)
return __gpio_get_value(gpio);
- mask = 1 << (gpio + STLS2F_GPIO_IN_OFFSET);
+ mask = 1 << (gpio + LOONGSON_GPIO_IN_OFFSET);
spin_lock(&gpio_lock);
val = LOONGSON_GPIODATA;
spin_unlock(&gpio_lock);
@@ -46,7 +56,7 @@ void gpio_set_value(unsigned gpio, int state)
u32 val;
u32 mask;
- if (gpio >= STLS2F_N_GPIO) {
+ if (gpio >= LOONGSON_N_GPIO) {
__gpio_set_value(gpio, state);
return ;
}
@@ -66,19 +76,19 @@ EXPORT_SYMBOL(gpio_set_value);
int gpio_cansleep(unsigned gpio)
{
- if (gpio < STLS2F_N_GPIO)
+ if (gpio < LOONGSON_N_GPIO)
return 0;
else
return __gpio_cansleep(gpio);
}
EXPORT_SYMBOL(gpio_cansleep);
-static int ls2f_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+static int loongson_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
{
u32 temp;
u32 mask;
- if (gpio >= STLS2F_N_GPIO)
+ if (gpio >= LOONGSON_N_GPIO)
return -EINVAL;
spin_lock(&gpio_lock);
@@ -91,13 +101,13 @@ static int ls2f_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
return 0;
}
-static int ls2f_gpio_direction_output(struct gpio_chip *chip,
+static int loongson_gpio_direction_output(struct gpio_chip *chip,
unsigned gpio, int level)
{
u32 temp;
u32 mask;
- if (gpio >= STLS2F_N_GPIO)
+ if (gpio >= LOONGSON_N_GPIO)
return -EINVAL;
gpio_set_value(gpio, level);
@@ -111,29 +121,29 @@ static int ls2f_gpio_direction_output(struct gpio_chip *chip,
return 0;
}
-static int ls2f_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
+static int loongson_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
{
return gpio_get_value(gpio);
}
-static void ls2f_gpio_set_value(struct gpio_chip *chip,
+static void loongson_gpio_set_value(struct gpio_chip *chip,
unsigned gpio, int value)
{
gpio_set_value(gpio, value);
}
-static struct gpio_chip ls2f_chip = {
- .label = "ls2f",
- .direction_input = ls2f_gpio_direction_input,
- .get = ls2f_gpio_get_value,
- .direction_output = ls2f_gpio_direction_output,
- .set = ls2f_gpio_set_value,
+static struct gpio_chip loongson_chip = {
+ .label = "Loongson-gpio-chip",
+ .direction_input = loongson_gpio_direction_input,
+ .get = loongson_gpio_get_value,
+ .direction_output = loongson_gpio_direction_output,
+ .set = loongson_gpio_set_value,
.base = 0,
- .ngpio = STLS2F_N_GPIO,
+ .ngpio = LOONGSON_N_GPIO,
};
-static int __init ls2f_gpio_setup(void)
+static int __init loongson_gpio_setup(void)
{
- return gpiochip_add(&ls2f_chip);
+ return gpiochip_add(&loongson_chip);
}
-arch_initcall(ls2f_gpio_setup);
+postcore_initcall(loongson_gpio_setup);
Improve Loongson-2's GPIO driver to support Loongson-3A/3B, and update Loongson-3's default config file. Signed-off-by: Huacai Chen <chenhc@lemote.com> --- arch/mips/Kconfig | 1 + arch/mips/configs/loongson3_defconfig | 1 + drivers/gpio/Kconfig | 6 ++-- drivers/gpio/gpio-loongson.c | 54 +++++++++++++++++++------------- 4 files changed, 37 insertions(+), 25 deletions(-)