From patchwork Tue Oct 28 00:01:54 2014 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dmitry Baryshkov X-Patchwork-Id: 404009 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 2CF1B140082 for ; Tue, 28 Oct 2014 11:02:33 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752918AbaJ1ACb (ORCPT ); Mon, 27 Oct 2014 20:02:31 -0400 Received: from mail-wi0-f173.google.com ([209.85.212.173]:34455 "EHLO mail-wi0-f173.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752880AbaJ1AC3 (ORCPT ); Mon, 27 Oct 2014 20:02:29 -0400 Received: by mail-wi0-f173.google.com with SMTP id ex7so7859930wid.0 for ; Mon, 27 Oct 2014 17:02:26 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=pzLS0sLhOHUmfb9rfwbwEOaljPHCiLiDtfwOJzBluVY=; b=nA+9WUJrpUEi86wVNq3NkfYCCxjIHQha95SmTWGt8nwp1LPdaZnW9OMQjB0fBc4B5T sX4Le7KMwtthotTIdo3JpndoTauAYCgZawzT8o7lBuhKaFiPQUV9peIjQMQkHJwzrRZZ 3MSNTOQ72IEhMQO9W3L5Kf+XBR8CT4Cwluq6JNXerPdno8VIn8+LsXMrvnD2XMd4gh13 RKD1x9BHYHGdn7zA2xsTPtV+nsAxMkflTEYQ4yvfiiAroIfFdSHW5ludnh2+B8Vin2d9 3ds28GwEtIxn2eWXmZBWhg30TKH7YgvmpoJxDIc/2klnTfwx5uocNQF91cbdJpAhjcNV G+gg== X-Received: by 10.194.205.132 with SMTP id lg4mr6718115wjc.84.1414454546754; Mon, 27 Oct 2014 17:02:26 -0700 (PDT) Received: from fangorn.rup.mentorg.com (nat-min.mentorg.com. [139.181.32.34]) by mx.google.com with ESMTPSA id fq1sm13495340wib.12.2014.10.27.17.02.24 for (version=TLSv1.2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Mon, 27 Oct 2014 17:02:25 -0700 (PDT) From: Dmitry Eremin-Solenikov To: linux-arm-kernel@lists.infradead.org, linux-gpio@vger.kernel.org, linux-input@vger.kernel.org, linux-leds@vger.kernel.org, linux-spi@vger.kernel.org, linux-fbdev@vger.kernel.org, alsa-devel@alsa-project.org Cc: Andrea Adami , Russell King , Daniel Mack , Haojian Zhuang , Robert Jarzmik , Linus Walleij , Alexandre Courbot , Dmitry Torokhov , Bryan Wu , Richard Purdie , Samuel Ortiz , Lee Jones , Mark Brown , Jingoo Han , Liam Girdwood Subject: [PATCH 01/15] mfd: add new driver for Sharp LoCoMo Date: Tue, 28 Oct 2014 03:01:54 +0300 Message-Id: <1414454528-24240-2-git-send-email-dbaryshkov@gmail.com> X-Mailer: git-send-email 2.1.1 In-Reply-To: <1414454528-24240-1-git-send-email-dbaryshkov@gmail.com> References: <1414454528-24240-1-git-send-email-dbaryshkov@gmail.com> Sender: linux-gpio-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-gpio@vger.kernel.org LoCoMo is a GA used on Sharp Zaurus SL-5x00. Current driver does has several design issues (special bus instead of platform bus, doesn't use mfd-core, etc). Implement 'core' parts of locomo support as an mfd driver. Signed-off-by: Dmitry Eremin-Solenikov --- drivers/mfd/Kconfig | 8 + drivers/mfd/Makefile | 1 + drivers/mfd/locomo.c | 644 +++++++++++++++++++++++++++++++++++++++++++++ include/linux/mfd/locomo.h | 171 ++++++++++++ 4 files changed, 824 insertions(+) create mode 100644 drivers/mfd/locomo.c create mode 100644 include/linux/mfd/locomo.h diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 1456ea7..1824a12 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1318,6 +1318,14 @@ config MFD_STW481X in various ST Microelectronics and ST-Ericsson embedded Nomadik series. +config MFD_LOCOMO + bool "Sharp LoCoMo support" + depends on ARM + select MFD_CORE + help + Support for Sharp LoCoMo Grid Array found in Sharp SL-5x00 + PDA family. + menu "Multimedia Capabilities Port drivers" depends on ARCH_SA1100 diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 8bd54b1..a4ea8de 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -174,6 +174,7 @@ obj-$(CONFIG_MFD_STW481X) += stw481x.o obj-$(CONFIG_MFD_IPAQ_MICRO) += ipaq-micro.o obj-$(CONFIG_MFD_MENF21BMC) += menf21bmc.o obj-$(CONFIG_MFD_HI6421_PMIC) += hi6421-pmic-core.o +obj-$(CONFIG_MFD_LOCOMO) += locomo.o intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o diff --git a/drivers/mfd/locomo.c b/drivers/mfd/locomo.c new file mode 100644 index 0000000..16b0208 --- /dev/null +++ b/drivers/mfd/locomo.c @@ -0,0 +1,644 @@ +/* + * Sharp LoCoMo support + * + * Based on old driver at arch/arm/common/locomo.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This file contains all generic LoCoMo support. + * + * All initialization functions provided here are intended to be called + * from machine specific code with proper arguments when required. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* LoCoMo Interrupts */ +#define IRQ_LOCOMO_KEY (0) +#define IRQ_LOCOMO_GPIO (1) +#define IRQ_LOCOMO_LT (2) +#define IRQ_LOCOMO_SPI (3) + +#define LOCOMO_NR_IRQS (4) + +/* the following is the overall data for the locomo chip */ +struct locomo { + unsigned int irq; + int irq_base; + spinlock_t lock; + void __iomem *base; + + bool has_amp_control; + int gpio_amp1_on; + int gpio_amp2_on; + +#ifdef CONFIG_PM_SLEEP + u16 LCM_ASD; +#endif +}; + +static struct gpio locomo_amp_gpios[] = { + { 0, GPIOF_OUT_INIT_LOW, "AMP1 ON" }, + { 0, GPIOF_OUT_INIT_LOW, "AMP2 ON" }, +}; + +static struct resource locomo_kbd_resources[] = { + DEFINE_RES_MEM(LOCOMO_KEYBOARD, 0x10), + DEFINE_RES_IRQ(IRQ_LOCOMO_KEY), +}; + +static struct resource locomo_gpio_resources[] = { + DEFINE_RES_MEM(LOCOMO_GPIO, 0x28), + DEFINE_RES_IRQ(IRQ_LOCOMO_GPIO), +}; + +static struct resource locomo_lt_resources[] = { + DEFINE_RES_MEM(LOCOMO_LTC, 0x8), + DEFINE_RES_IRQ(IRQ_LOCOMO_LT), +}; + +static struct resource locomo_spi_resources[] = { + DEFINE_RES_MEM(LOCOMO_SPI, 0x30), + DEFINE_RES_IRQ(IRQ_LOCOMO_SPI), +}; + +static struct resource locomo_led_resources[] = { + DEFINE_RES_MEM(LOCOMO_LED, 0x8), +}; + +static struct resource locomo_backlight_resources[] = { + DEFINE_RES_MEM(LOCOMO_FRONTLIGHT, 0x08), +}; + +static struct resource locomo_lcd_resources[] = { + DEFINE_RES_MEM(LOCOMO_TFT, 0x08), +}; + +static struct resource locomo_audio_resources[] = { + DEFINE_RES_MEM(LOCOMO_AUDIO, 0x04), + DEFINE_RES_MEM(LOCOMO_PAIF, 0x04), +}; + +static struct mfd_cell locomo_cells[] = { + { + .name = "locomo-kbd", + .resources = locomo_kbd_resources, + .num_resources = ARRAY_SIZE(locomo_kbd_resources), + }, + { + .name = "locomo-gpio", + .resources = locomo_gpio_resources, + .num_resources = ARRAY_SIZE(locomo_gpio_resources), + }, + { + .name = "locomo-lt", /* Long time timer */ + .resources = locomo_lt_resources, + .num_resources = ARRAY_SIZE(locomo_lt_resources), + }, + { + .name = "locomo-spi", + .resources = locomo_spi_resources, + .num_resources = ARRAY_SIZE(locomo_spi_resources), + }, + { + .name = "locomo-led", + .resources = locomo_led_resources, + .num_resources = ARRAY_SIZE(locomo_led_resources), + }, + { + .name = "locomo-backlight", + .resources = locomo_backlight_resources, + .num_resources = ARRAY_SIZE(locomo_backlight_resources), + }, + { + .name = "locomo-lcd", + .resources = locomo_lcd_resources, + .num_resources = ARRAY_SIZE(locomo_lcd_resources), + }, + { + .name = "locomo-audio", + .resources = locomo_audio_resources, + .num_resources = ARRAY_SIZE(locomo_audio_resources), + }, +}; + +/* DAC send data */ +#define M62332_SLAVE_ADDR 0x4e /* Slave address */ +#define M62332_W_BIT 0x00 /* W bit (0 only) */ +#define M62332_SUB_ADDR 0x00 /* Sub address */ +#define M62332_A_BIT 0x00 /* A bit (0 only) */ + +/* DAC setup and hold times (expressed in us) */ +#define DAC_BUS_FREE_TIME 5 /* 4.7 us */ +#define DAC_START_SETUP_TIME 5 /* 4.7 us */ +#define DAC_STOP_SETUP_TIME 4 /* 4.0 us */ +#define DAC_START_HOLD_TIME 5 /* 4.7 us */ +#define DAC_SCL_LOW_HOLD_TIME 5 /* 4.7 us */ +#define DAC_SCL_HIGH_HOLD_TIME 4 /* 4.0 us */ +#define DAC_DATA_SETUP_TIME 1 /* 250 ns */ +#define DAC_DATA_HOLD_TIME 1 /* 300 ns */ +#define DAC_LOW_SETUP_TIME 1 /* 300 ns */ +#define DAC_HIGH_SETUP_TIME 1 /* 1000 ns */ + +/* I2C dedicated to external DAC */ +static void locomo_m62332_sendbit(struct locomo *lchip, int bit) +{ + u16 r; + + r = readw(lchip->base + LOCOMO_DAC); + r &= ~(LOCOMO_DAC_SCLOEB); + writew(r, lchip->base + LOCOMO_DAC); + + udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */ + udelay(DAC_DATA_HOLD_TIME); /* 300 nsec */ + + r = readw(lchip->base + LOCOMO_DAC); + r &= ~(LOCOMO_DAC_SDAOEB); + writew(r, lchip->base + LOCOMO_DAC); + + udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */ + udelay(DAC_SCL_LOW_HOLD_TIME); /* 4.7 usec */ + + if (bit & 1) { + r = readw(lchip->base + LOCOMO_DAC); + r |= LOCOMO_DAC_SDAOEB; + writew(r, lchip->base + LOCOMO_DAC); + + udelay(DAC_HIGH_SETUP_TIME); /* 1000 nsec */ + } else { + r = readw(lchip->base + LOCOMO_DAC); + r &= ~(LOCOMO_DAC_SDAOEB); + writew(r, lchip->base + LOCOMO_DAC); + + udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */ + } + udelay(DAC_DATA_SETUP_TIME); /* 250 nsec */ + + r = readw(lchip->base + LOCOMO_DAC); + r |= LOCOMO_DAC_SCLOEB; + writew(r, lchip->base + LOCOMO_DAC); + + udelay(DAC_HIGH_SETUP_TIME); /* 1000 nsec */ + udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.0 usec */ +} + +/* Start */ +static void locomo_m62332_start(struct locomo *lchip) +{ + u16 r; + + udelay(DAC_BUS_FREE_TIME); /* 5.0 usec */ + + r = readw(lchip->base + LOCOMO_DAC); + r |= LOCOMO_DAC_SCLOEB | LOCOMO_DAC_SDAOEB; + writew(r, lchip->base + LOCOMO_DAC); + + udelay(DAC_HIGH_SETUP_TIME); /* 1000 nsec */ + udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.0 usec */ + + r = readw(lchip->base + LOCOMO_DAC); + r &= ~(LOCOMO_DAC_SDAOEB); + writew(r, lchip->base + LOCOMO_DAC); + + udelay(DAC_START_HOLD_TIME); /* 5.0 usec */ + udelay(DAC_DATA_HOLD_TIME); /* 300 nsec */ + +} + +/* Check A bit */ +static int locomo_m62332_check_a(struct locomo *lchip) +{ + u16 r; + + r = readw(lchip->base + LOCOMO_DAC); + r &= ~(LOCOMO_DAC_SCLOEB); + writew(r, lchip->base + LOCOMO_DAC); + + udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */ + udelay(DAC_SCL_LOW_HOLD_TIME); /* 4.7 usec */ + + r = readw(lchip->base + LOCOMO_DAC); + r &= ~(LOCOMO_DAC_SDAOEB); + writew(r, lchip->base + LOCOMO_DAC); + + udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */ + + r = readw(lchip->base + LOCOMO_DAC); + r |= LOCOMO_DAC_SCLOEB; + writew(r, lchip->base + LOCOMO_DAC); + + udelay(DAC_HIGH_SETUP_TIME); /* 1000 nsec */ + udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.7 usec */ + + return readw(lchip->base + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB; +} + +/* Stop */ +static void locomo_m62332_stop(struct locomo *lchip) +{ + u16 r; + + r = readw(lchip->base + LOCOMO_DAC); + r &= ~(LOCOMO_DAC_SCLOEB); + writew(r, lchip->base + LOCOMO_DAC); + + udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */ + udelay(DAC_SCL_LOW_HOLD_TIME); /* 4.7 usec */ + + r = readw(lchip->base + LOCOMO_DAC); + r |= LOCOMO_DAC_SCLOEB; + writew(r, lchip->base + LOCOMO_DAC); + + udelay(DAC_HIGH_SETUP_TIME); /* 1000 nsec */ + udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4 usec */ + + r = readw(lchip->base + LOCOMO_DAC); + r |= LOCOMO_DAC_SDAOEB; + writew(r, lchip->base + LOCOMO_DAC); + + udelay(DAC_HIGH_SETUP_TIME); /* 1000 nsec */ + udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4 usec */ + + r = readw(lchip->base + LOCOMO_DAC); + r |= LOCOMO_DAC_SCLOEB | LOCOMO_DAC_SDAOEB; + writew(r, lchip->base + LOCOMO_DAC); + + udelay(DAC_LOW_SETUP_TIME); /* 1000 nsec */ + udelay(DAC_SCL_LOW_HOLD_TIME); /* 4.7 usec */ +} + +void locomo_m62332_senddata(struct device *dev, unsigned int dac_data, + int channel) +{ + struct locomo *lchip = dev_get_drvdata(dev); + int i; + unsigned char data; + unsigned long flags; + + /* This works for now */ + if (lchip->has_amp_control && dac_data) { + gpio_set_value(lchip->gpio_amp1_on, 1); + gpio_set_value(lchip->gpio_amp2_on, 1); + mdelay(5); + } + + spin_lock_irqsave(&lchip->lock, flags); + + locomo_m62332_start(lchip); + + /* Send slave address and W bit (LSB is W bit) */ + data = (M62332_SLAVE_ADDR << 1) | M62332_W_BIT; + for (i = 1; i <= 8; i++) + locomo_m62332_sendbit(lchip, data >> (8 - i)); + + if (locomo_m62332_check_a(lchip)) { /* High is error */ + dev_warn(dev, "locomo: m62332_senddata Error 1\n"); + goto out; + } + + /* Send Sub address (LSB is channel select) */ + /* channel = 0 : ch1 select */ + /* = 1 : ch2 select */ + data = M62332_SUB_ADDR + channel; + for (i = 1; i <= 8; i++) + locomo_m62332_sendbit(lchip, data >> (8 - i)); + + if (locomo_m62332_check_a(lchip)) { /* High is error */ + dev_warn(dev, "locomo: m62332_senddata Error 2\n"); + goto out; + } + + /* Send DAC data */ + for (i = 1; i <= 8; i++) + locomo_m62332_sendbit(lchip, dac_data >> (8 - i)); + + if (locomo_m62332_check_a(lchip)) { /* High is error */ + dev_warn(dev, "locomo: m62332_senddata Error 3\n"); + goto out; + } + +out: + locomo_m62332_stop(lchip); + + spin_unlock_irqrestore(&lchip->lock, flags); + + /* This works for now */ + if (lchip->has_amp_control && !dac_data) { + mdelay(5); + gpio_set_value(lchip->gpio_amp1_on, 0); + gpio_set_value(lchip->gpio_amp2_on, 0); + } + +} +EXPORT_SYMBOL(locomo_m62332_senddata); + +/* IRQ support */ +static void locomo_handler(unsigned int irq, struct irq_desc *desc) +{ + struct locomo *lchip = irq_get_handler_data(irq); + int req, i; + + /* Acknowledge the parent IRQ */ + desc->irq_data.chip->irq_ack(&desc->irq_data); + + /* check why this interrupt was generated */ + req = readw(lchip->base + LOCOMO_ICR) & 0x0f00; + + if (req) { + /* generate the next interrupt(s) */ + irq = lchip->irq_base; + for (i = 0; i <= 3; i++, irq++) { + if (req & (0x0100 << i)) + generic_handle_irq(irq); + + } + } +} + +static void locomo_ack_irq(struct irq_data *d) +{ +} + +static void locomo_mask_irq(struct irq_data *d) +{ + struct locomo *lchip = irq_data_get_irq_chip_data(d); + unsigned int r; + + r = readw(lchip->base + LOCOMO_ICR); + r &= ~(0x0010 << (d->irq - lchip->irq_base)); + writew(r, lchip->base + LOCOMO_ICR); +} + +static void locomo_unmask_irq(struct irq_data *d) +{ + struct locomo *lchip = irq_data_get_irq_chip_data(d); + unsigned int r; + + r = readw(lchip->base + LOCOMO_ICR); + r |= (0x0010 << (d->irq - lchip->irq_base)); + writew(r, lchip->base + LOCOMO_ICR); +} + +static struct irq_chip locomo_chip = { + .name = "LOCOMO", + .irq_ack = locomo_ack_irq, + .irq_mask = locomo_mask_irq, + .irq_unmask = locomo_unmask_irq, +}; + +static void locomo_setup_irq(struct locomo *lchip) +{ + int irq; + + lchip->irq_base = irq_alloc_descs(-1, 0, LOCOMO_NR_IRQS, -1); + + /* Install handlers for IRQ_LOCOMO_* */ + for (irq = lchip->irq_base; + irq < lchip->irq_base + LOCOMO_NR_IRQS; + irq++) { + irq_set_chip_and_handler(irq, &locomo_chip, handle_level_irq); + irq_set_chip_data(irq, lchip); + set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + } + + /* + * Install handler for IRQ_LOCOMO_HW. + */ + irq_set_irq_type(lchip->irq, IRQ_TYPE_EDGE_FALLING); + irq_set_handler_data(lchip->irq, lchip); + irq_set_chained_handler(lchip->irq, locomo_handler); +} + + +#ifdef CONFIG_PM_SLEEP +static int locomo_suspend(struct device *dev) +{ + struct locomo *lchip = dev_get_drvdata(dev); + unsigned long flags; + + spin_lock_irqsave(&lchip->lock, flags); + + /* ADSTART */ + lchip->LCM_ASD = readw(lchip->base + LOCOMO_ASD); /* ADSTART */ + writew(0x00, lchip->base + LOCOMO_ASD); + + /* AUDIO */ + writew(0x00, lchip->base + LOCOMO_PAIF); + writew(0x00, lchip->base + LOCOMO_DAC); + + if ((readw(lchip->base + LOCOMO_LED + LOCOMO_LPT0) & 0x88) && + (readw(lchip->base + LOCOMO_LED + LOCOMO_LPT1) & 0x88)) + /* CLK32 off */ + writew(0x00, lchip->base + LOCOMO_C32K); + else + /* 18MHz already enabled, so no wait */ + /* CLK32 on */ + writew(0xc1, lchip->base + LOCOMO_C32K); + + /* 18MHz clock off*/ + writew(0x00, lchip->base + LOCOMO_TADC); + /* 22MHz/24MHz clock off */ + writew(0x00, lchip->base + LOCOMO_AUDIO + LOCOMO_ACC); + + spin_unlock_irqrestore(&lchip->lock, flags); + + return 0; +} + +static int locomo_resume(struct device *dev) +{ + struct locomo *lchip = dev_get_drvdata(dev); + unsigned long flags; + + spin_lock_irqsave(&lchip->lock, flags); + + writew(lchip->LCM_ASD, lchip->base + LOCOMO_ASD); + + writew(0x00, lchip->base + LOCOMO_C32K); + writew(0x90, lchip->base + LOCOMO_TADC); + + spin_unlock_irqrestore(&lchip->lock, flags); + + return 0; +} +static SIMPLE_DEV_PM_OPS(locomo_pm, locomo_suspend, locomo_resume); +#define LOCOMO_PM (&locomo_pm) +#else +#define LOCOMO_PM NULL +#endif + +static int locomo_probe(struct platform_device *dev) +{ + struct locomo_platform_data *pdata = dev_get_platdata(&dev->dev); + struct resource *mem; + int irq; + struct locomo *lchip; + unsigned long r; + int ret = -ENODEV; + + mem = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!mem) + return -EINVAL; + irq = platform_get_irq(dev, 0); + if (irq < 0) + return -ENXIO; + + lchip = devm_kzalloc(&dev->dev, sizeof(struct locomo), GFP_KERNEL); + if (!lchip) + return -ENOMEM; + + spin_lock_init(&lchip->lock); + + /* + * Map the whole region. This also maps the + * registers for our children. + */ + lchip->base = devm_ioremap(&dev->dev, mem->start, resource_size(mem)); + if (!lchip->base) + return -ENOMEM; + + lchip->irq = irq; + platform_set_drvdata(dev, lchip); + + if (pdata) { + locomo_cells[1].platform_data = &pdata->gpio_data; + locomo_cells[1].pdata_size = + sizeof(struct locomo_gpio_platform_data); + locomo_cells[5].platform_data = &pdata->bl_data; + locomo_cells[5].pdata_size = + sizeof(struct locomo_bl_platform_data); + locomo_cells[6].platform_data = &pdata->lcd_data; + locomo_cells[6].pdata_size = + sizeof(struct locomo_lcd_platform_data); + + lchip->gpio_amp1_on = pdata->gpio_amp1_on; + lchip->gpio_amp2_on = pdata->gpio_amp2_on; + } + + if (gpio_is_valid(lchip->gpio_amp1_on) && + gpio_is_valid(lchip->gpio_amp2_on)) { + lchip->has_amp_control = true; + locomo_amp_gpios[0].gpio = lchip->gpio_amp1_on; + locomo_amp_gpios[1].gpio = lchip->gpio_amp2_on; + ret = gpio_request_array(locomo_amp_gpios, + ARRAY_SIZE(locomo_amp_gpios)); + if (ret) + return ret; + } + + /* locomo initialize */ + writew(0, lchip->base + LOCOMO_ICR); + + /* Longtime timer */ + writew(0, lchip->base + LOCOMO_LTINT); + /* SPI */ + writew(0, lchip->base + LOCOMO_SPI + LOCOMO_SPIIE); + + writew(6 + 8 + 320 + 30 - 10, lchip->base + LOCOMO_ASD); + r = readw(lchip->base + LOCOMO_ASD); + r |= 0x8000; + writew(r, lchip->base + LOCOMO_ASD); + + writew(6 + 8 + 320 + 30 - 10 - 128 + 4, lchip->base + LOCOMO_HSD); + r = readw(lchip->base + LOCOMO_HSD); + r |= 0x8000; + writew(r, lchip->base + LOCOMO_HSD); + + writew(128 / 8, lchip->base + LOCOMO_HSC); + + /* XON */ + writew(0x80, lchip->base + LOCOMO_TADC); + udelay(1000); + /* CLK9MEN */ + r = readw(lchip->base + LOCOMO_TADC); + r |= 0x10; + writew(r, lchip->base + LOCOMO_TADC); + udelay(100); + + /* init DAC */ + r = readw(lchip->base + LOCOMO_DAC); + r |= LOCOMO_DAC_SCLOEB | LOCOMO_DAC_SDAOEB; + writew(r, lchip->base + LOCOMO_DAC); + + r = readw(lchip->base + LOCOMO_VER); + dev_info(&dev->dev, "LoCoMo Chip: %lu%lu\n", (r >> 8), (r & 0xff)); + + /* + * The interrupt controller must be initialised before any + * other device to ensure that the interrupts are available. + */ + if (lchip->irq != NO_IRQ) + locomo_setup_irq(lchip); + + ret = mfd_add_devices(&dev->dev, dev->id, + locomo_cells, ARRAY_SIZE(locomo_cells), + mem, lchip->irq_base, NULL); + if (ret) + goto err_add; + + return 0; + +err_add: + if (lchip->irq != NO_IRQ) { + irq_set_chained_handler(lchip->irq, NULL); + irq_set_handler_data(lchip->irq, NULL); + irq_free_descs(lchip->irq_base, LOCOMO_NR_IRQS); + } + + if (lchip->has_amp_control) + gpio_free_array(locomo_amp_gpios, + ARRAY_SIZE(locomo_amp_gpios)); + platform_set_drvdata(dev, NULL); + + return ret; +} + +static int locomo_remove(struct platform_device *dev) +{ + struct locomo *lchip = platform_get_drvdata(dev); + + if (!lchip) + return 0; + + mfd_remove_devices(&dev->dev); + + if (lchip->irq != NO_IRQ) { + irq_set_chained_handler(lchip->irq, NULL); + irq_set_handler_data(lchip->irq, NULL); + irq_free_descs(lchip->irq_base, LOCOMO_NR_IRQS); + } + + if (lchip->has_amp_control) + gpio_free_array(locomo_amp_gpios, + ARRAY_SIZE(locomo_amp_gpios)); + platform_set_drvdata(dev, NULL); + + return 0; +} + +static struct platform_driver locomo_device_driver = { + .probe = locomo_probe, + .remove = locomo_remove, + .driver = { + .name = "locomo", + .owner = THIS_MODULE, + .pm = LOCOMO_PM, + }, +}; + +module_platform_driver(locomo_device_driver); + +MODULE_DESCRIPTION("Sharp LoCoMo core driver"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("John Lenz "); +MODULE_ALIAS("platform:locomo"); diff --git a/include/linux/mfd/locomo.h b/include/linux/mfd/locomo.h new file mode 100644 index 0000000..1f54300 --- /dev/null +++ b/include/linux/mfd/locomo.h @@ -0,0 +1,171 @@ +/* + * include/linux/mfd/locomo.h + * + * This file contains the definitions for the LoCoMo G/A Chip + * + * (C) Copyright 2004 John Lenz + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Based on sa1111.h + */ +#ifndef _ASM_ARCH_LOCOMO +#define _ASM_ARCH_LOCOMO + +/* LOCOMO version */ +#define LOCOMO_VER 0x00 + +/* Pin status */ +#define LOCOMO_ST 0x04 + +/* Pin status */ +#define LOCOMO_C32K 0x08 + +/* Interrupt controller */ +#define LOCOMO_ICR 0x0C + +/* MCS decoder for boot selecting */ +#define LOCOMO_MCSX0 0x10 +#define LOCOMO_MCSX1 0x14 +#define LOCOMO_MCSX2 0x18 +#define LOCOMO_MCSX3 0x1c + +/* Touch panel controller */ +#define LOCOMO_ASD 0x20 /* AD start delay */ +#define LOCOMO_HSD 0x28 /* HSYS delay */ +#define LOCOMO_HSC 0x2c /* HSYS period */ +#define LOCOMO_TADC 0x30 /* tablet ADC clock */ + + +/* Long time timer */ +#define LOCOMO_LTC 0xd8 /* LTC interrupt setting */ +#define LOCOMO_LTINT 0xdc /* LTC interrupt */ + +/* DAC control signal for LCD (COMADJ ) */ +#define LOCOMO_DAC 0xe0 +/* DAC control */ +#define LOCOMO_DAC_SCLOEB 0x08 /* SCL pin output data */ +#define LOCOMO_DAC_TEST 0x04 /* Test bit */ +#define LOCOMO_DAC_SDA 0x02 /* SDA pin level (read-only) */ +#define LOCOMO_DAC_SDAOEB 0x01 /* SDA pin output data */ + +/* SPI interface */ +#define LOCOMO_SPI 0x60 +#define LOCOMO_SPIMD 0x00 /* SPI mode setting */ +#define LOCOMO_SPICT 0x04 /* SPI mode control */ +#define LOCOMO_SPIST 0x08 /* SPI status */ +#define LOCOMO_SPI_TEND (1 << 3) /* Transfer end bit */ +#define LOCOMO_SPI_REND (1 << 2) /* Receive end bit */ +#define LOCOMO_SPI_RFW (1 << 1) /* write buffer bit */ +#define LOCOMO_SPI_RFR (1) /* read buffer bit */ + +#define LOCOMO_SPIIS 0x10 /* SPI interrupt status */ +#define LOCOMO_SPIWE 0x14 /* SPI interrupt status write enable */ +#define LOCOMO_SPIIE 0x18 /* SPI interrupt enable */ +#define LOCOMO_SPIIR 0x1c /* SPI interrupt request */ +#define LOCOMO_SPITD 0x20 /* SPI transfer data write */ +#define LOCOMO_SPIRD 0x24 /* SPI receive data read */ +#define LOCOMO_SPITS 0x28 /* SPI transfer data shift */ +#define LOCOMO_SPIRS 0x2C /* SPI receive data shift */ + +/* GPIO */ +#define LOCOMO_GPIO 0x90 +#define LOCOMO_GPD 0x00 /* GPIO direction */ +#define LOCOMO_GPE 0x04 /* GPIO input enable */ +#define LOCOMO_GPL 0x08 /* GPIO level */ +#define LOCOMO_GPO 0x0c /* GPIO out data setting */ +#define LOCOMO_GRIE 0x10 /* GPIO rise detection */ +#define LOCOMO_GFIE 0x14 /* GPIO fall detection */ +#define LOCOMO_GIS 0x18 /* GPIO edge detection status */ +#define LOCOMO_GWE 0x1c /* GPIO status write enable */ +#define LOCOMO_GIE 0x20 /* GPIO interrupt enable */ +#define LOCOMO_GIR 0x24 /* GPIO interrupt request */ + +/* Start the definitions of the devices. Each device has an initial + * base address and a series of offsets from that base address. */ + +/* Keyboard controller */ +#define LOCOMO_KEYBOARD 0x40 +#define LOCOMO_KIB 0x00 /* KIB level */ +#define LOCOMO_KSC 0x04 /* KSTRB control */ +#define LOCOMO_KCMD 0x08 /* KSTRB command */ +#define LOCOMO_KIC 0x0c /* Key interrupt */ + +/* Front light adjustment controller */ +#define LOCOMO_FRONTLIGHT 0xc8 +#define LOCOMO_ALS 0x00 /* Adjust light cycle */ +#define LOCOMO_ALD 0x04 /* Adjust light duty */ + +#define LOCOMO_ALC_EN 0x8000 + +/* Backlight controller: TFT signal */ +#define LOCOMO_TFT 0x38 +#define LOCOMO_TC 0x00 /* TFT control signal */ +#define LOCOMO_CPSD 0x04 /* CPS delay */ + +/* Audio controller */ +#define LOCOMO_AUDIO 0x54 +#define LOCOMO_ACC 0x00 /* Audio clock */ +#define LOCOMO_PAIF 0xD0 /* PCM audio interface */ +/* Audio clock */ +#define LOCOMO_ACC_XON 0x80 +#define LOCOMO_ACC_XEN 0x40 +#define LOCOMO_ACC_XSEL0 0x00 +#define LOCOMO_ACC_XSEL1 0x20 +#define LOCOMO_ACC_MCLKEN 0x10 +#define LOCOMO_ACC_64FSEN 0x08 +#define LOCOMO_ACC_CLKSEL000 0x00 /* mclk 2 */ +#define LOCOMO_ACC_CLKSEL001 0x01 /* mclk 3 */ +#define LOCOMO_ACC_CLKSEL010 0x02 /* mclk 4 */ +#define LOCOMO_ACC_CLKSEL011 0x03 /* mclk 6 */ +#define LOCOMO_ACC_CLKSEL100 0x04 /* mclk 8 */ +#define LOCOMO_ACC_CLKSEL101 0x05 /* mclk 12 */ +/* PCM audio interface */ +#define LOCOMO_PAIF_SCINV 0x20 +#define LOCOMO_PAIF_SCEN 0x10 +#define LOCOMO_PAIF_LRCRST 0x08 +#define LOCOMO_PAIF_LRCEVE 0x04 +#define LOCOMO_PAIF_LRCINV 0x02 +#define LOCOMO_PAIF_LRCEN 0x01 + +/* LED controller */ +#define LOCOMO_LED 0xe8 +#define LOCOMO_LPT0 0x00 +#define LOCOMO_LPT1 0x04 +/* LED control */ +#define LOCOMO_LPT_TOFH 0x80 +#define LOCOMO_LPT_TOFL 0x08 +#define LOCOMO_LPT_TOH(TOH) ((TOH & 0x7) << 4) +#define LOCOMO_LPT_TOL(TOL) ((TOL & 0x7)) + +struct locomo_gpio_platform_data { + unsigned int gpio_base; +}; + +struct locomo_lcd_platform_data { + u8 comadj; + int gpio_lcd_vsha_on; + int gpio_lcd_vshd_on; + int gpio_lcd_vee_on; + int gpio_lcd_mod; +}; + +struct locomo_bl_platform_data { + int gpio_fl_vr; +}; + +struct locomo_platform_data { + struct locomo_gpio_platform_data gpio_data; + struct locomo_lcd_platform_data lcd_data; + struct locomo_bl_platform_data bl_data; + + int gpio_amp1_on; + int gpio_amp2_on; +}; + +/* Send data to i2c DAC connected to LoCoMo i2c bus */ +extern void locomo_m62332_senddata(struct device *dev, unsigned int dac_data, + int channel); + +#endif