Message ID | 20240920154508.1618410-1-ivo.ivanov.ivanov1@gmail.com |
---|---|
Headers | show |
Series | Add minimal Exynos8895 SoC and SM-G950F support | expand |
On Fri, Sep 20, 2024 at 5:45 PM Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> wrote: > This series adds initial SoC support for the Exynos 8895 SoC and also > initial board support for Samsung Galaxy S8 phone (SM-G950F), codenamed > dreamlte. The pinctrl stuff looks OK to me but I expect Krzysztof to queue it up and send me a pull request, he keeps the order around the Exynos pin control code and bindings. Yours, Linus Walleij
On 20/09/2024 17:44, Ivaylo Ivanov wrote: > Hi folks, > > This series adds initial SoC support for the Exynos 8895 SoC and also > initial board support for Samsung Galaxy S8 phone (SM-G950F), codenamed > dreamlte. > > The Exynos 8895 SoC is also used in S8 Plus (dream2lte), Note 8 (greatlte) > and Meizu 15 Plus (m1891). Currently DT is added for the Exynos 8895 SoC > and dreamlte, but it should be really easy to adapt for the other devices > with the same SoC. It has been tested with dtbs_check W=1 and results > in no warnings. > > The support added in this series consists of: > * cpus > * pinctrl > * gpio > * simple-framebuffer > * pstore The way you sent patches makes it difficult to work with. I don't know what is the reason for b4 diff failure: b4 diff '<20240920154508.1618410-1-ivo.ivanov.ivanov1@gmail.com>' Grabbing thread from lore.kernel.org/all/20240920154508.1618410-1-ivo.ivanov.ivanov1@gmail.com/t.mbox.gz Checking for older revisions Grabbing search results from lore.kernel.org Nothing matching that query. --- Analyzing 12 messages in the thread Could not find lower series to compare against. so please use b4 for future contributions. Best regards, Krzysztof
On 20/09/2024 17:44, Ivaylo Ivanov wrote: > Hi folks, > > This series adds initial SoC support for the Exynos 8895 SoC and also > initial board support for Samsung Galaxy S8 phone (SM-G950F), codenamed > dreamlte. > > The Exynos 8895 SoC is also used in S8 Plus (dream2lte), Note 8 (greatlte) > and Meizu 15 Plus (m1891). Currently DT is added for the Exynos 8895 SoC > and dreamlte, but it should be really easy to adapt for the other devices > with the same SoC. It has been tested with dtbs_check W=1 and results > in no warnings. > > The support added in this series consists of: > * cpus > * pinctrl > * gpio > * simple-framebuffer > * pstore > > This is enough to reach a minimal initramfs shell using an upstream kernel. > More platform support will be added in the future. > > The preferred way to boot this device is by using a small shim bl called > uniLoader [1], which packages the mainline kernel and DT and jumps to > the kernel. This is done in order to work around some issues caused by > the stock, and non-replacable Samsung S-Boot bootloader. For example, > S-Boot leaves the decon trigger control unset, which causes the framebuffer > to not refresh. > > [1] https://github.com/ivoszbg/uniLoader > > Changes in v2: > - No patch changes were made, only fixed the issues with my git send-email > > Changes in v3: > - Added a-b tags by Rob Herring and Linus Walleij > - Ordered the Samsung Mongoose M2 compatible in cpus.yaml > - Ordered the EXYNOS8895 information in exynos-chipid.c > - Made the commit message for pinctrl support more detailed > - Made the commit message for exynos-pmu.yaml more detailed > - Fixed suffixes for the exynos8895 pinctrl device tree > - Removed redundant nodes from the exynos8895 pinctrl device tree > - Made the arm-a53-pmu node cover only the Cortex A53 cores > - Added a comment mentioning the lack of a PMU model for Mongoose cores > - Added a comment mentioning the issue with CNTFRQ_EL0 > - Removed the redundant fixed rate clocks wrapper > - Ordered the nodes by the DTS coding style in all 8895 DT files > - Removed the redundant status property from the simple-framebuffer node > - Switch to dual licensing (GPL-2.0 OR BSD-3-Clause) for the DT files > > Changes in v4: > - Added r-b tag by Sam Protsenko > - Resolved the remaining pinctrl node name regex issues > - Corrected interrupt-cells for gpa1-gpio-bank > - Fixed suffixes for the dreamlte gpio keys pin nodes > - Reordered the dreamlte gpio-keys nodes alphabetically > - Fixed interrupt-controller simple-bus unit address > - Change framebuffer-related node labels to match other device trees > > Changes in v5: > - Removed a false a-b > - Added an r-b tag by Krzysztof Kozlowski <krzk@kernel.org> > - Ordered nodes alphabetically while keeping -gpio-bank's in front in > the exynos8895 pinctrl DT > - Sorted a few nodes and properties in the exynos8895 SoC DT > > Kind regards, > Ivaylo. > > Ivaylo Ivanov (10): > dt-bindings: arm: cpus: Add Samsung Mongoose M2 > dt-bindings: hwinfo: samsung,exynos-chipid: add exynos8895 compatible > soc: samsung: exynos-chipid: add exynos8895 SoC support > dt-bindings: pinctrl: samsung: Add compatible for Exynos8895 SoC > pinctrl: samsung: Add exynos8895 SoC pinctrl configuration > dt-bindings: pinctrl: samsung: add exynos8895-wakeup-eint compatible > dt-bindings: soc: samsung: exynos-pmu: Add exynos8895 compatible > arm64: dts: exynos: Add initial support for exynos8895 SoC > dt-bindings: arm: samsung: Document dreamlte board binding > arm64: dts: exynos: Add initial support for Samsung Galaxy S8 One more thing, the way you mixed series makes it very difficult to apply. Instead of applying few independent series, I need to: 1. Apply, drop patches (or apply 1-by-1). 2. Re-order patches. 3. Apply remaining 1-by-1 on pinctrl. Please organize your series per subsystem. SoC is a subsystem. pinctrl is different. Bindings always go first, I asked for it already. And here everything is mixed. Best regards, Krzysztof
On Fri, 20 Sep 2024 18:44:58 +0300, Ivaylo Ivanov wrote: > This series adds initial SoC support for the Exynos 8895 SoC and also > initial board support for Samsung Galaxy S8 phone (SM-G950F), codenamed > dreamlte. > > The Exynos 8895 SoC is also used in S8 Plus (dream2lte), Note 8 (greatlte) > and Meizu 15 Plus (m1891). Currently DT is added for the Exynos 8895 SoC > and dreamlte, but it should be really easy to adapt for the other devices > with the same SoC. It has been tested with dtbs_check W=1 and results > in no warnings. > > [...] Applied, thanks! There was quite a mess in submission, so all patches had to be re-orded and split. Below commit IDs might be not accurate. In the future be sure you organize your patchset per subsystem and correct order of patches (bindings are always first). [01/10] dt-bindings: arm: cpus: Add Samsung Mongoose M2 https://git.kernel.org/krzk/linux/c/d27c76fcd4190cab051543b2ffa2f183a6142c0a [02/10] dt-bindings: hwinfo: samsung,exynos-chipid: add exynos8895 compatible https://git.kernel.org/krzk/linux/c/7f6ea7198e8350ad199bc56f524ea2cc753f8ab7 [03/10] soc: samsung: exynos-chipid: add exynos8895 SoC support https://git.kernel.org/krzk/linux/c/e6bb0575953f3f850f5583e9adae3260866e0cbe [04/10] dt-bindings: pinctrl: samsung: Add compatible for Exynos8895 SoC (no commit info) [05/10] pinctrl: samsung: Add exynos8895 SoC pinctrl configuration (no commit info) [06/10] dt-bindings: pinctrl: samsung: add exynos8895-wakeup-eint compatible (no commit info) [07/10] dt-bindings: soc: samsung: exynos-pmu: Add exynos8895 compatible https://git.kernel.org/krzk/linux/c/496374c1d0045177cb5c3e85ce33b2179b11a413 [08/10] arm64: dts: exynos: Add initial support for exynos8895 SoC https://git.kernel.org/krzk/linux/c/dcabaa8ae457647e334bbcaf21f9209315e8f752 [09/10] dt-bindings: arm: samsung: Document dreamlte board binding https://git.kernel.org/krzk/linux/c/2caf56f6cf69b026749a2c6c8ad083e5c47b8362 [10/10] arm64: dts: exynos: Add initial support for Samsung Galaxy S8 https://git.kernel.org/krzk/linux/c/296621bfa3ddefcbc4a3c1f64f6e868680a1be59 Best regards,
On 10/2/24 10:57, Krzysztof Kozlowski wrote: > On Fri, 20 Sep 2024 18:44:58 +0300, Ivaylo Ivanov wrote: >> This series adds initial SoC support for the Exynos 8895 SoC and also >> initial board support for Samsung Galaxy S8 phone (SM-G950F), codenamed >> dreamlte. >> >> The Exynos 8895 SoC is also used in S8 Plus (dream2lte), Note 8 (greatlte) >> and Meizu 15 Plus (m1891). Currently DT is added for the Exynos 8895 SoC >> and dreamlte, but it should be really easy to adapt for the other devices >> with the same SoC. It has been tested with dtbs_check W=1 and results >> in no warnings. >> >> [...] > Applied, thanks! > > There was quite a mess in submission, so all patches had to be re-orded and > split. Below commit IDs might be not accurate. > > In the future be sure you organize your patchset per subsystem and correct > order of patches (bindings are always first). Alright, thanks! I'll make sure to split patches by subsystems in the future, especially since I'll be upstreaming Exynos3475 soon. Kind regards, Ivo. > > [01/10] dt-bindings: arm: cpus: Add Samsung Mongoose M2 > https://git.kernel.org/krzk/linux/c/d27c76fcd4190cab051543b2ffa2f183a6142c0a > [02/10] dt-bindings: hwinfo: samsung,exynos-chipid: add exynos8895 compatible > https://git.kernel.org/krzk/linux/c/7f6ea7198e8350ad199bc56f524ea2cc753f8ab7 > [03/10] soc: samsung: exynos-chipid: add exynos8895 SoC support > https://git.kernel.org/krzk/linux/c/e6bb0575953f3f850f5583e9adae3260866e0cbe > [04/10] dt-bindings: pinctrl: samsung: Add compatible for Exynos8895 SoC > (no commit info) > [05/10] pinctrl: samsung: Add exynos8895 SoC pinctrl configuration > (no commit info) > [06/10] dt-bindings: pinctrl: samsung: add exynos8895-wakeup-eint compatible > (no commit info) > [07/10] dt-bindings: soc: samsung: exynos-pmu: Add exynos8895 compatible > https://git.kernel.org/krzk/linux/c/496374c1d0045177cb5c3e85ce33b2179b11a413 > [08/10] arm64: dts: exynos: Add initial support for exynos8895 SoC > https://git.kernel.org/krzk/linux/c/dcabaa8ae457647e334bbcaf21f9209315e8f752 > [09/10] dt-bindings: arm: samsung: Document dreamlte board binding > https://git.kernel.org/krzk/linux/c/2caf56f6cf69b026749a2c6c8ad083e5c47b8362 > [10/10] arm64: dts: exynos: Add initial support for Samsung Galaxy S8 > https://git.kernel.org/krzk/linux/c/296621bfa3ddefcbc4a3c1f64f6e868680a1be59 > > Best regards,