mbox series

[v9,0/1] gpio: add simple logic analyzer using polling

Message ID 20240610112700.80819-1-wsa+renesas@sang-engineering.com
Headers show
Series gpio: add simple logic analyzer using polling | expand

Message

Wolfram Sang June 10, 2024, 11:26 a.m. UTC
Here is the next version of the sloppy GPIO logic analyzer. Changes
since v8 are mentioned in the patch itself. For those new to this
sloppy GPIO logic analyzer, here is a small excerpt from a previous
cover-letter with the links updated:

===

Here is the next update of the in-kernel logic analyzer based on GPIO
polling with local irqs disabled. It has been tested locally and
remotely. It provided satisfactory results. Besides the driver, there is
also a script which isolates a CPU to achieve the best possible result.
I am aware of the latency limitations. However, the intention is for
debugging only, not mass production. Especially for remote debugging and
to get a first impression, this has already been useful. Documentation
is within the patch, to get a better idea what this is all about.

A branch is here:
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git renesas/gpio-logic-analyzer-v9

And an eLinux-wiki page with a picture of a result is here:
https://elinux.org/Kernel_GPIO_Logic_analyzer

I've used the analyzer in a few more scenarios and on multiple SoCs
(Renesas R-Car H3 and M3-W) and was happy with the outcome. Looking
forward to other tests and comments. From my side this is good to go.

===

Thanks and happy hacking,

   Wolfram

Wolfram Sang (1):
  gpio: add sloppy logic analyzer using polling

 .../dev-tools/gpio-sloppy-logic-analyzer.rst  |  93 +++++
 Documentation/dev-tools/index.rst             |   1 +
 drivers/gpio/Kconfig                          |  17 +
 drivers/gpio/Makefile                         |   1 +
 drivers/gpio/gpio-sloppy-logic-analyzer.c     | 340 ++++++++++++++++++
 tools/gpio/gpio-sloppy-logic-analyzer.sh      | 246 +++++++++++++
 6 files changed, 698 insertions(+)
 create mode 100644 Documentation/dev-tools/gpio-sloppy-logic-analyzer.rst
 create mode 100644 drivers/gpio/gpio-sloppy-logic-analyzer.c
 create mode 100755 tools/gpio/gpio-sloppy-logic-analyzer.sh