| Message ID | 20220621161126.15883-1-quic_srichara@quicinc.com |
|---|---|
| Headers | show |
| Series | Add minimal boot support for IPQ5018 | expand |
On Tue, Jun 21, 2022 at 6:11 PM Sricharan R <quic_srichara@quicinc.com> wrote: > The IPQ5018 is Qualcomm's 802.11ax SoC for Routers, > Gateways and Access Points. > > This series adds minimal board boot support for ipq5018-mp03.1-c2 board. Pretty cool! > dt-bindings: pinctrl: qcom: Add ipq5018 pinctrl bindings > pinctrl: qcom: Add IPQ5018 pinctrl driver I'm happy to merge the two pinctrl patches separately to the pinctrl tree if I can get a review from Bjorn or Krzysztof. Yours, Linus Walleij
Hi Linus, On 6/28/2022 6:25 PM, Linus Walleij wrote: > On Tue, Jun 21, 2022 at 6:11 PM Sricharan R <quic_srichara@quicinc.com> wrote: > >> The IPQ5018 is Qualcomm's 802.11ax SoC for Routers, >> Gateways and Access Points. >> >> This series adds minimal board boot support for ipq5018-mp03.1-c2 board. > Pretty cool! > >> dt-bindings: pinctrl: qcom: Add ipq5018 pinctrl bindings >> pinctrl: qcom: Add IPQ5018 pinctrl driver > I'm happy to merge the two pinctrl patches separately to the pinctrl > tree if I can get a review from Bjorn or Krzysztof. Thanks. Have few review comments from Bjorn and Krzysztof on the bindings. Will post V3 and hopefully that should have their acks on that. Regards, Sricharan
The IPQ5018 is Qualcomm's 802.11ax SoC for Routers, Gateways and Access Points. This series adds minimal board boot support for ipq5018-mp03.1-c2 board. [v2] Fixed all comments and rebased for TOT. Varadarajan Narayanan (8): clk: qcom: clk-alpha-pll: Add support for Stromer PLLs dt-bindings: arm64: ipq5018: Add binding descriptions for clock and reset clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018 dt-bindings: pinctrl: qcom: Add ipq5018 pinctrl bindings pinctrl: qcom: Add IPQ5018 pinctrl driver dt-bindings: qcom: Add ipq5018 bindings arm64: dts: Add ipq5018 SoC and MP03 board support arm64: defconfig: Enable IPQ5018 SoC base configs .../devicetree/bindings/arm/qcom.yaml | 7 + .../bindings/clock/qcom,gcc-other.yaml | 3 + .../pinctrl/qcom,ipq5018-pinctrl.yaml | 145 + arch/arm64/boot/dts/qcom/Makefile | 1 + .../arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts | 29 + arch/arm64/boot/dts/qcom/ipq5018.dtsi | 221 + arch/arm64/configs/defconfig | 3 + drivers/clk/qcom/Kconfig | 7 + drivers/clk/qcom/Makefile | 1 + drivers/clk/qcom/clk-alpha-pll.c | 100 +- drivers/clk/qcom/clk-alpha-pll.h | 7 +- drivers/clk/qcom/gcc-ipq5018.c | 3995 +++++++++++++++++ drivers/pinctrl/qcom/Kconfig | 10 + drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-ipq5018.c | 791 ++++ include/dt-bindings/clock/qcom,gcc-ipq5018.h | 188 + include/dt-bindings/reset/qcom,gcc-ipq5018.h | 122 + 17 files changed, 5629 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts create mode 100644 arch/arm64/boot/dts/qcom/ipq5018.dtsi create mode 100644 drivers/clk/qcom/gcc-ipq5018.c create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq5018.c create mode 100644 include/dt-bindings/clock/qcom,gcc-ipq5018.h create mode 100644 include/dt-bindings/reset/qcom,gcc-ipq5018.h