| Message ID | 20230125225416.4074040-2-eajames@linux.ibm.com |
|---|---|
| State | New |
| Headers | show |
| Series | fsi: Add IBM I2C Responder virtual FSI master | expand |
On Wed, 25 Jan 2023 16:54:15 -0600, Eddie James wrote: > The I2C Responder translates I2C commands to CFAM or SCOM operations, > effectively implementing an FSI master. > > Signed-off-by: Eddie James <eajames@linux.ibm.com> > --- > .../bindings/fsi/ibm,i2cr-fsi-master.yaml | 41 +++++++++++++++++++ > 1 file changed, 41 insertions(+) > create mode 100644 Documentation/devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: ./Documentation/devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml:32:2: [warning] wrong indentation: expected 2 but found 1 (indentation) dtschema/dtc warnings/errors: ./Documentation/devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml: $id: relative path/filename doesn't match actual path or filename expected: http://devicetree.org/schemas/fsi/ibm,i2cr-fsi-master.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230125225416.4074040-2-eajames@linux.ibm.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
diff --git a/Documentation/devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml b/Documentation/devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml new file mode 100644 index 000000000000..fa768e773adc --- /dev/null +++ b/Documentation/devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/fsi/ibm,i2cr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: IBM I2C Responder virtual FSI master + +maintainers: + - Eddie James <eajames@linux.ibm.com> + +description: | + The I2C Responder (I2CR) is a an I2C device that's connected to an FSI CFAM + (see fsi.txt). The I2CR translates I2C bus operations to FSI CFAM reads and + writes or SCOM operations, thereby acting as an FSI master. + +properties: + compatible: + enum: + - ibm,i2cr-fsi-master + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + i2cr@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + }; + };
The I2C Responder translates I2C commands to CFAM or SCOM operations, effectively implementing an FSI master. Signed-off-by: Eddie James <eajames@linux.ibm.com> --- .../bindings/fsi/ibm,i2cr-fsi-master.yaml | 41 +++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 Documentation/devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml