diff mbox series

[V8,06/11] fs/xfs: Create function xfs_inode_enable_dax()

Message ID 20200415064523.2244712-7-ira.weiny@intel.com
State Not Applicable
Headers show
Series Enable per-file/per-directory DAX operations V8 | expand

Commit Message

Ira Weiny April 15, 2020, 6:45 a.m. UTC
From: Ira Weiny <ira.weiny@intel.com>

xfs_inode_supports_dax() should reflect if the inode can support DAX not
that it is enabled for DAX.

Change the use of xfs_inode_supports_dax() to reflect only if the inode
and underlying storage support dax.

Add a new function xfs_inode_enable_dax() which reflects if the inode
should be enabled for DAX.

Signed-off-by: Ira Weiny <ira.weiny@intel.com>

---
Changes from v7:
	Move S_ISREG check first
	use IS_ENABLED(CONFIG_FS_DAX) rather than duplicated function

Changes from v6:
	Change enable checks to be sequential logic.
	Update for 2 bit tri-state option.
	Make 'static' consistent.
	Don't set S_DAX if !CONFIG_FS_DAX

Changes from v5:
	Update to reflect the new tri-state mount option

Changes from v3:
	Update functions and names to be more clear
	Update commit message
	Merge with
		'fs/xfs: Clean up DAX support check'
		don't allow IS_DAX() on a directory
		use STATIC macro for static
		make xfs_inode_supports_dax() static
---
 fs/xfs/xfs_iops.c | 28 ++++++++++++++++++++++------
 1 file changed, 22 insertions(+), 6 deletions(-)

Comments

Darrick Wong April 15, 2020, 3:17 p.m. UTC | #1
On Tue, Apr 14, 2020 at 11:45:18PM -0700, ira.weiny@intel.com wrote:
> From: Ira Weiny <ira.weiny@intel.com>
> 
> xfs_inode_supports_dax() should reflect if the inode can support DAX not
> that it is enabled for DAX.
> 
> Change the use of xfs_inode_supports_dax() to reflect only if the inode
> and underlying storage support dax.
> 
> Add a new function xfs_inode_enable_dax() which reflects if the inode
> should be enabled for DAX.
> 
> Signed-off-by: Ira Weiny <ira.weiny@intel.com>
> 
> ---
> Changes from v7:
> 	Move S_ISREG check first
> 	use IS_ENABLED(CONFIG_FS_DAX) rather than duplicated function
> 
> Changes from v6:
> 	Change enable checks to be sequential logic.
> 	Update for 2 bit tri-state option.
> 	Make 'static' consistent.
> 	Don't set S_DAX if !CONFIG_FS_DAX
> 
> Changes from v5:
> 	Update to reflect the new tri-state mount option
> 
> Changes from v3:
> 	Update functions and names to be more clear
> 	Update commit message
> 	Merge with
> 		'fs/xfs: Clean up DAX support check'
> 		don't allow IS_DAX() on a directory
> 		use STATIC macro for static
> 		make xfs_inode_supports_dax() static
> ---
>  fs/xfs/xfs_iops.c | 28 ++++++++++++++++++++++------
>  1 file changed, 22 insertions(+), 6 deletions(-)
> 
> diff --git a/fs/xfs/xfs_iops.c b/fs/xfs/xfs_iops.c
> index a6e634631da8..2ecc2b2050ab 100644
> --- a/fs/xfs/xfs_iops.c
> +++ b/fs/xfs/xfs_iops.c
> @@ -1243,13 +1243,12 @@ xfs_inode_supports_dax(
>  {
>  	struct xfs_mount	*mp = ip->i_mount;
>  
> -	/* Only supported on non-reflinked files. */
> -	if (!S_ISREG(VFS_I(ip)->i_mode) || xfs_is_reflink_inode(ip))
> +	/* Only supported on regular files. */
> +	if (!S_ISREG(VFS_I(ip)->i_mode))
>  		return false;
>  
> -	/* DAX mount option or DAX iflag must be set. */
> -	if (!(mp->m_flags & XFS_MOUNT_DAX_ALWAYS) &&
> -	    !(ip->i_d.di_flags2 & XFS_DIFLAG2_DAX))
> +	/* Only supported on non-reflinked files. */
> +	if (xfs_is_reflink_inode(ip))
>  		return false;
>  
>  	/* Block size must match page size */
> @@ -1260,6 +1259,23 @@ xfs_inode_supports_dax(
>  	return xfs_inode_buftarg(ip)->bt_daxdev != NULL;
>  }
>  
> +static bool
> +xfs_inode_enable_dax(
> +	struct xfs_inode *ip)
> +{
> +	if (!IS_ENABLED(CONFIG_FS_DAX))
> +		return false;
> +	if (ip->i_mount->m_flags & XFS_MOUNT_DAX_NEVER)
> +		return false;
> +	if (!xfs_inode_supports_dax(ip))
> +		return false;
> +	if (ip->i_mount->m_flags & XFS_MOUNT_DAX_ALWAYS)
> +		return true;
> +	if (ip->i_d.di_flags2 & XFS_DIFLAG2_DAX)
> +		return true;
> +	return false;

You could simplify the last two lines by making them read:

return ip->i_d.di_flags2 & XFS_DIFLAG2_DAX;

But it's probably not worth respinning the whole thing just for that.

Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>

--D

> +}
> +
>  STATIC void
>  xfs_diflags_to_iflags(
>  	struct inode		*inode,
> @@ -1278,7 +1294,7 @@ xfs_diflags_to_iflags(
>  		inode->i_flags |= S_SYNC;
>  	if (flags & XFS_DIFLAG_NOATIME)
>  		inode->i_flags |= S_NOATIME;
> -	if (xfs_inode_supports_dax(ip))
> +	if (xfs_inode_enable_dax(ip))
>  		inode->i_flags |= S_DAX;
>  }
>  
> -- 
> 2.25.1
>
diff mbox series

Patch

diff --git a/fs/xfs/xfs_iops.c b/fs/xfs/xfs_iops.c
index a6e634631da8..2ecc2b2050ab 100644
--- a/fs/xfs/xfs_iops.c
+++ b/fs/xfs/xfs_iops.c
@@ -1243,13 +1243,12 @@  xfs_inode_supports_dax(
 {
 	struct xfs_mount	*mp = ip->i_mount;
 
-	/* Only supported on non-reflinked files. */
-	if (!S_ISREG(VFS_I(ip)->i_mode) || xfs_is_reflink_inode(ip))
+	/* Only supported on regular files. */
+	if (!S_ISREG(VFS_I(ip)->i_mode))
 		return false;
 
-	/* DAX mount option or DAX iflag must be set. */
-	if (!(mp->m_flags & XFS_MOUNT_DAX_ALWAYS) &&
-	    !(ip->i_d.di_flags2 & XFS_DIFLAG2_DAX))
+	/* Only supported on non-reflinked files. */
+	if (xfs_is_reflink_inode(ip))
 		return false;
 
 	/* Block size must match page size */
@@ -1260,6 +1259,23 @@  xfs_inode_supports_dax(
 	return xfs_inode_buftarg(ip)->bt_daxdev != NULL;
 }
 
+static bool
+xfs_inode_enable_dax(
+	struct xfs_inode *ip)
+{
+	if (!IS_ENABLED(CONFIG_FS_DAX))
+		return false;
+	if (ip->i_mount->m_flags & XFS_MOUNT_DAX_NEVER)
+		return false;
+	if (!xfs_inode_supports_dax(ip))
+		return false;
+	if (ip->i_mount->m_flags & XFS_MOUNT_DAX_ALWAYS)
+		return true;
+	if (ip->i_d.di_flags2 & XFS_DIFLAG2_DAX)
+		return true;
+	return false;
+}
+
 STATIC void
 xfs_diflags_to_iflags(
 	struct inode		*inode,
@@ -1278,7 +1294,7 @@  xfs_diflags_to_iflags(
 		inode->i_flags |= S_SYNC;
 	if (flags & XFS_DIFLAG_NOATIME)
 		inode->i_flags |= S_NOATIME;
-	if (xfs_inode_supports_dax(ip))
+	if (xfs_inode_enable_dax(ip))
 		inode->i_flags |= S_DAX;
 }