diff mbox series

[v5,1/2] dt-bindings: arm: aspeed: add IBM SBP1 board

Message ID 20241010112337.3840703-1-naresh.solanki@9elements.com
State New
Headers show
Series [v5,1/2] dt-bindings: arm: aspeed: add IBM SBP1 board | expand

Commit Message

Naresh Solanki Oct. 10, 2024, 11:23 a.m. UTC
Document the new compatibles used on IBM SBP1.

Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
---
Changes in V4:
- Retain Acked-by from v2.
- Fix alphabetic order
---
 Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 +
 1 file changed, 1 insertion(+)

Comments

Rob Herring Oct. 10, 2024, 2:30 p.m. UTC | #1
On Thu, 10 Oct 2024 16:53:31 +0530, Naresh Solanki wrote:
> Document the new compatibles used on IBM SBP1.
> 
> Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
> Acked-by: Conor Dooley <conor.dooley@microchip.com>
> ---
> Changes in V4:
> - Retain Acked-by from v2.
> - Fix alphabetic order
> ---
>  Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


New warnings running 'make CHECK_DTBS=y aspeed/aspeed-bmc-ibm-sbp1.dtb' for 20241010112337.3840703-1-naresh.solanki@9elements.com:

arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: timer: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/timer/arm,arch_timer.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /sdram@1e6e0000: failed to match any schema with compatible: ['aspeed,ast2600-sdram-edac', 'syscon']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: bus@1e600000: compatible: ['aspeed,ast2600-ahbc', 'syscon'] is too long
	from schema $id: http://devicetree.org/schemas/bus/aspeed,ast2600-ahbc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: syscon@1e6e2000: 'smp-memram@180' does not match any of the regexes: '^interrupt-controller@[0-9a-f]+$', '^p2a-control@[0-9a-f]+$', '^pinctrl(@[0-9a-f]+)?$', '^silicon-id@[0-9a-f]+$', 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/mfd/aspeed,ast2x00-scu.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb/syscon@1e6e2000/smp-memram@180: failed to match any schema with compatible: ['aspeed,ast2600-smpmem']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb/syscon@1e6e2000/interrupt-controller@560: failed to match any schema with compatible: ['aspeed,ast2600-scu-ic0']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb/syscon@1e6e2000/interrupt-controller@570: failed to match any schema with compatible: ['aspeed,ast2600-scu-ic1']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb/display@1e6e6000: failed to match any schema with compatible: ['aspeed,ast2600-gfx', 'syscon']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: adc@1e6e9000: 'interrupts' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: adc@1e6e9100: 'interrupts' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: crypto@1e6fa000: 'aspeed,ahbc' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/crypto/aspeed,ast2600-acry.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb/video@1e700000: failed to match any schema with compatible: ['aspeed,ast2600-video-engine']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb/timer@1e782000: failed to match any schema with compatible: ['aspeed,ast2600-timer']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: lpc@1e789000: lpc-snoop@80: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: lpc@1e789000: reg-io-width: 4 is not of type 'object'
	from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: kcs@24: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: kcs@28: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: kcs@2c: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: kcs@114: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb/lpc@1e789000/lhc@a0: failed to match any schema with compatible: ['aspeed,ast2600-lhc']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb/lpc@1e789000/ibt@140: failed to match any schema with compatible: ['aspeed,ast2600-ibt-bmc']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: sdc@1e740000: sdhci@1e740100:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long
	from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: sdc@1e740000: sdhci@1e740200:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long
	from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740100: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740200: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb/bus@1e78a000/i2c@280/bmc-slave@10: failed to match any schema with compatible: ['ipmb-dev']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mux@77: interrupts: False schema does not allow [[44, 4]]
	from schema $id: http://devicetree.org/schemas/i2c/i2c-mux-pca954x.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: pvccinfaon-pvccfa-cpu2@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mp2973-pvccin-pvccfa-cpu2@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: pvccinfaon-pvccfa-cpu1@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mp2973-pvccin-pvccfa-cpu1@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: pvccinfaon-pvccfa-cpu3@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mp2973-pvccin-pvccfa-cpu3@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: regulator@5f: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: regulator@5f: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: regulator@5f: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: regulator@5f: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: pvccinfaon-pvccfa-cpu0@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mp2973-pvccin-pvccfa-cpu0@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: fsi@1e79b000: compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long
	from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb/fsi@1e79b000: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: fsi@1e79b100: compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long
	from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb/fsi@1e79b100: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: /ahb/apb/dma-controller@1e79e000: failed to match any schema with compatible: ['aspeed,ast2600-udma']
Andrew Jeffery Oct. 10, 2024, 11:45 p.m. UTC | #2
Hi Naresh,

On Thu, 2024-10-10 at 09:30 -0500, Rob Herring (Arm) wrote:
> On Thu, 10 Oct 2024 16:53:31 +0530, Naresh Solanki wrote:
> > Document the new compatibles used on IBM SBP1.
> > 
> > Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
> > Acked-by: Conor Dooley <conor.dooley@microchip.com>
> > ---
> > Changes in V4:
> > - Retain Acked-by from v2.
> > - Fix alphabetic order
> > ---
> >  Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 +
> >  1 file changed, 1 insertion(+)
> > 
> 
> 
> My bot found new DTB warnings on the .dts files added or changed in this
> series.
> 
> Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
> are fixed by another series. Ultimately, it is up to the platform
> maintainer whether these warnings are acceptable or not. No need to reply
> unless the platform maintainer has comments.
> 
> If you already ran DT checks and didn't see these error(s), then
> make sure dt-schema is up to date:
> 
>   pip3 install dtschema --upgrade
> 
> 
> New warnings running 'make CHECK_DTBS=y aspeed/aspeed-bmc-ibm-sbp1.dtb' for 20241010112337.3840703-1-naresh.solanki@9elements.com:
> 

...

> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mux@77: interrupts: False schema does not allow [[44, 4]]
> 	from schema $id: http://devicetree.org/schemas/i2c/i2c-mux-pca954x.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: pvccinfaon-pvccfa-cpu2@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> 	from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mp2973-pvccin-pvccfa-cpu2@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> 	from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: pvccinfaon-pvccfa-cpu1@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> 	from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mp2973-pvccin-pvccfa-cpu1@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> 	from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: pvccinfaon-pvccfa-cpu3@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> 	from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mp2973-pvccin-pvccfa-cpu3@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> 	from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: regulator@5f: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> 	from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: regulator@5f: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> 	from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: regulator@5f: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> 	from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: regulator@5f: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> 	from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: pvccinfaon-pvccfa-cpu0@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> 	from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mp2973-pvccin-pvccfa-cpu0@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> 	from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#

These still must be addressed as mentioned on v3 (with more specific
comments regarding the infineon,ir38263 on v4). Please look through the
binding documents for the affected nodes and make sure the nodes in
your DTS conform to their definitions. You can check your work with
`make CHECK_DTBS=y aspeed/aspeed-bmc-ibm-sbp1.dtb` prior to sending.

It may help to base your series on top of [1] to reduce the volume of
output from CHECK_DTBS=y.

Andrew

[1]: https://github.com/amboar/linux/tree/for/bmc/aspeed/dt
Naresh Solanki Oct. 11, 2024, 8:08 a.m. UTC | #3
Hi Andrew,


On Fri, 11 Oct 2024 at 05:15, Andrew Jeffery
<andrew@codeconstruct.com.au> wrote:
>
> Hi Naresh,
>
> On Thu, 2024-10-10 at 09:30 -0500, Rob Herring (Arm) wrote:
> > On Thu, 10 Oct 2024 16:53:31 +0530, Naresh Solanki wrote:
> > > Document the new compatibles used on IBM SBP1.
> > >
> > > Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
> > > Acked-by: Conor Dooley <conor.dooley@microchip.com>
> > > ---
> > > Changes in V4:
> > > - Retain Acked-by from v2.
> > > - Fix alphabetic order
> > > ---
> > >  Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 +
> > >  1 file changed, 1 insertion(+)
> > >
> >
> >
> > My bot found new DTB warnings on the .dts files added or changed in this
> > series.
> >
> > Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
> > are fixed by another series. Ultimately, it is up to the platform
> > maintainer whether these warnings are acceptable or not. No need to reply
> > unless the platform maintainer has comments.
> >
> > If you already ran DT checks and didn't see these error(s), then
> > make sure dt-schema is up to date:
> >
> >   pip3 install dtschema --upgrade
> >
> >
> > New warnings running 'make CHECK_DTBS=y aspeed/aspeed-bmc-ibm-sbp1.dtb' for 20241010112337.3840703-1-naresh.solanki@9elements.com:
> >
>
> ...
>
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mux@77: interrupts: False schema does not allow [[44, 4]]
> >       from schema $id: http://devicetree.org/schemas/i2c/i2c-mux-pca954x.yaml#
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: pvccinfaon-pvccfa-cpu2@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> >       from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mp2973-pvccin-pvccfa-cpu2@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> >       from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: pvccinfaon-pvccfa-cpu1@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> >       from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mp2973-pvccin-pvccfa-cpu1@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> >       from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: pvccinfaon-pvccfa-cpu3@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> >       from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mp2973-pvccin-pvccfa-cpu3@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> >       from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: regulator@5f: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> >       from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: regulator@5f: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> >       from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: regulator@5f: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> >       from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: regulator@5f: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> >       from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: pvccinfaon-pvccfa-cpu0@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> >       from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mp2973-pvccin-pvccfa-cpu0@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> >       from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
>
> These still must be addressed as mentioned on v3 (with more specific
> comments regarding the infineon,ir38263 on v4). Please look through the
> binding documents for the affected nodes and make sure the nodes in
> your DTS conform to their definitions. You can check your work with
> `make CHECK_DTBS=y aspeed/aspeed-bmc-ibm-sbp1.dtb` prior to sending.

These are the warnings coming for trivial devices. Even for regulator@5f

grep -rsn mp2973 Documentation/
Documentation/devicetree/bindings/trivial-devices.yaml:286:
# Monolithic Power Systems Inc. multi-phase controller mp2973
Documentation/devicetree/bindings/trivial-devices.yaml:287:          -
mps,mp2973

I've rebased it on top of for-next branch in [2]

I rebased on top of [1] & the volume of output did reduce for CHECK_DTBS.

Regards,
Naresh

[2] git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git
>
> It may help to base your series on top of [1] to reduce the volume of
> output from CHECK_DTBS=y.
>
> Andrew
>
> [1]: https://github.com/amboar/linux/tree/for/bmc/aspeed/dt
>
Andrew Jeffery Oct. 15, 2024, 12:38 a.m. UTC | #4
Hi Naresh,

On Fri, 2024-10-11 at 13:38 +0530, Naresh Solanki wrote:
> Hi Andrew,
> 
> 
> On Fri, 11 Oct 2024 at 05:15, Andrew Jeffery
> <andrew@codeconstruct.com.au> wrote:
> > 
> > Hi Naresh,
> > 
> > On Thu, 2024-10-10 at 09:30 -0500, Rob Herring (Arm) wrote:
> > > On Thu, 10 Oct 2024 16:53:31 +0530, Naresh Solanki wrote:
> > > > Document the new compatibles used on IBM SBP1.
> > > > 
> > > > Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
> > > > Acked-by: Conor Dooley <conor.dooley@microchip.com>
> > > > ---
> > > > Changes in V4:
> > > > - Retain Acked-by from v2.
> > > > - Fix alphabetic order
> > > > ---
> > > >  Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 +
> > > >  1 file changed, 1 insertion(+)
> > > > 
> > > 
> > > 
> > > My bot found new DTB warnings on the .dts files added or changed in this
> > > series.
> > > 
> > > Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
> > > are fixed by another series. Ultimately, it is up to the platform
> > > maintainer whether these warnings are acceptable or not. No need to reply
> > > unless the platform maintainer has comments.
> > > 
> > > If you already ran DT checks and didn't see these error(s), then
> > > make sure dt-schema is up to date:
> > > 
> > >  pip3 install dtschema --upgrade
> > > 
> > > 
> > > New warnings running 'make CHECK_DTBS=y aspeed/aspeed-bmc-ibm-sbp1.dtb' for 20241010112337.3840703-1-naresh.solanki@9elements.com:
> > > 
> > 
> > ...
> > 
> > > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mux@77: interrupts: False schema does not allow [[44, 4]]
> > >  from schema $id: http://devicetree.org/schemas/i2c/i2c-mux-pca954x.yaml#
> > > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: pvccinfaon-pvccfa-cpu2@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> > >  from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mp2973-pvccin-pvccfa-cpu2@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> > >  from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: pvccinfaon-pvccfa-cpu1@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> > >  from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mp2973-pvccin-pvccfa-cpu1@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> > >  from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: pvccinfaon-pvccfa-cpu3@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> > >  from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mp2973-pvccin-pvccfa-cpu3@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> > >  from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: regulator@5f: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> > >  from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: regulator@5f: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> > >  from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: regulator@5f: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> > >  from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: regulator@5f: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> > >  from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: pvccinfaon-pvccfa-cpu0@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> > >  from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mp2973-pvccin-pvccfa-cpu0@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> > >  from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > 
> > These still must be addressed as mentioned on v3 (with more specific
> > comments regarding the infineon,ir38263 on v4). Please look through the
> > binding documents for the affected nodes and make sure the nodes in
> > your DTS conform to their definitions. You can check your work with
> > `make CHECK_DTBS=y aspeed/aspeed-bmc-ibm-sbp1.dtb` prior to sending.
> 
> These are the warnings coming for trivial devices. Even for regulator@5f
> 
> grep -rsn mp2973 Documentation/
> Documentation/devicetree/bindings/trivial-devices.yaml:286:
> # Monolithic Power Systems Inc. multi-phase controller mp2973
> Documentation/devicetree/bindings/trivial-devices.yaml:287: -
> mps,mp2973
> 

Right, but if they're generating warnings, then you haven't specified
the nodes in accordance with the bindings. From here one of two things
is the case:

   1. The bindings' specifications are incomplete, and you need to
      introduce patches updating them to match how you need to use the
      hardware
   2. Your devicetree is incorrect, and the unexpected properties need
      to be removed from the listed nodes.

The only third option is "don't use the hardware how you need to" (i.e.
remove the unexpected properties despite needing them, because you
don't want to update the bindings).

Ultimately the tools are telling you something is wrong, and I need the
warnings I've identified addressed before I can apply your patch,
otherwise the hardware is not going to do what you might expect.
> I've rebased it on top of for-next branch in [2]
> 
> I rebased on top of [1] & the volume of output did reduce for CHECK_DTBS.

Great :)

Andrew
Conor Dooley Oct. 15, 2024, 6:56 a.m. UTC | #5
On Fri, Oct 11, 2024 at 01:38:52PM +0530, Naresh Solanki wrote:
> Hi Andrew,
> 
> 
> On Fri, 11 Oct 2024 at 05:15, Andrew Jeffery
> <andrew@codeconstruct.com.au> wrote:
> >
> > Hi Naresh,
> >
> > On Thu, 2024-10-10 at 09:30 -0500, Rob Herring (Arm) wrote:
> > > On Thu, 10 Oct 2024 16:53:31 +0530, Naresh Solanki wrote:
> > > > Document the new compatibles used on IBM SBP1.
> > > >
> > > > Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
> > > > Acked-by: Conor Dooley <conor.dooley@microchip.com>
> > > > ---
> > > > Changes in V4:
> > > > - Retain Acked-by from v2.
> > > > - Fix alphabetic order
> > > > ---
> > > >  Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 +
> > > >  1 file changed, 1 insertion(+)
> > > >
> > >
> > >
> > > My bot found new DTB warnings on the .dts files added or changed in this
> > > series.
> > >
> > > Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
> > > are fixed by another series. Ultimately, it is up to the platform
> > > maintainer whether these warnings are acceptable or not. No need to reply
> > > unless the platform maintainer has comments.
> > >
> > > If you already ran DT checks and didn't see these error(s), then
> > > make sure dt-schema is up to date:
> > >
> > >   pip3 install dtschema --upgrade
> > >
> > >
> > > New warnings running 'make CHECK_DTBS=y aspeed/aspeed-bmc-ibm-sbp1.dtb' for 20241010112337.3840703-1-naresh.solanki@9elements.com:
> > >
> >
> > ...
> >
> > > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mux@77: interrupts: False schema does not allow [[44, 4]]
> > >       from schema $id: http://devicetree.org/schemas/i2c/i2c-mux-pca954x.yaml#
> > > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: pvccinfaon-pvccfa-cpu2@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> > >       from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mp2973-pvccin-pvccfa-cpu2@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> > >       from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: pvccinfaon-pvccfa-cpu1@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> > >       from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mp2973-pvccin-pvccfa-cpu1@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> > >       from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: pvccinfaon-pvccfa-cpu3@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> > >       from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mp2973-pvccin-pvccfa-cpu3@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> > >       from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: regulator@5f: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> > >       from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: regulator@5f: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> > >       from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: regulator@5f: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> > >       from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: regulator@5f: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> > >       from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: pvccinfaon-pvccfa-cpu0@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> > >       from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mp2973-pvccin-pvccfa-cpu0@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> > >       from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> >
> > These still must be addressed as mentioned on v3 (with more specific
> > comments regarding the infineon,ir38263 on v4). Please look through the
> > binding documents for the affected nodes and make sure the nodes in
> > your DTS conform to their definitions. You can check your work with
> > `make CHECK_DTBS=y aspeed/aspeed-bmc-ibm-sbp1.dtb` prior to sending.
> 
> These are the warnings coming for trivial devices. Even for regulator@5f
> 
> grep -rsn mp2973 Documentation/
> Documentation/devicetree/bindings/trivial-devices.yaml:286:
> # Monolithic Power Systems Inc. multi-phase controller mp2973
> Documentation/devicetree/bindings/trivial-devices.yaml:287:          -
> mps,mp2973

It coming from trivial-devices.yaml means that the device does not
actually qualify as a trivial device, but rather needs to be described
in a binding of its own.
Naresh Solanki Oct. 15, 2024, 9:40 a.m. UTC | #6
Hi Andrew, Conor,


On Tue, 15 Oct 2024 at 06:08, Andrew Jeffery
<andrew@codeconstruct.com.au> wrote:
>
> Hi Naresh,
>
> On Fri, 2024-10-11 at 13:38 +0530, Naresh Solanki wrote:
> > Hi Andrew,
> >
> >
> > On Fri, 11 Oct 2024 at 05:15, Andrew Jeffery
> > <andrew@codeconstruct.com.au> wrote:
> > >
> > > Hi Naresh,
> > >
> > > On Thu, 2024-10-10 at 09:30 -0500, Rob Herring (Arm) wrote:
> > > > On Thu, 10 Oct 2024 16:53:31 +0530, Naresh Solanki wrote:
> > > > > Document the new compatibles used on IBM SBP1.
> > > > >
> > > > > Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
> > > > > Acked-by: Conor Dooley <conor.dooley@microchip.com>
> > > > > ---
> > > > > Changes in V4:
> > > > > - Retain Acked-by from v2.
> > > > > - Fix alphabetic order
> > > > > ---
> > > > >  Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 +
> > > > >  1 file changed, 1 insertion(+)
> > > > >
> > > >
> > > >
> > > > My bot found new DTB warnings on the .dts files added or changed in this
> > > > series.
> > > >
> > > > Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
> > > > are fixed by another series. Ultimately, it is up to the platform
> > > > maintainer whether these warnings are acceptable or not. No need to reply
> > > > unless the platform maintainer has comments.
> > > >
> > > > If you already ran DT checks and didn't see these error(s), then
> > > > make sure dt-schema is up to date:
> > > >
> > > >  pip3 install dtschema --upgrade
> > > >
> > > >
> > > > New warnings running 'make CHECK_DTBS=y aspeed/aspeed-bmc-ibm-sbp1.dtb' for 20241010112337.3840703-1-naresh.solanki@9elements.com:
> > > >
> > >
> > > ...
> > >
> > > > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mux@77: interrupts: False schema does not allow [[44, 4]]
> > > >  from schema $id: http://devicetree.org/schemas/i2c/i2c-mux-pca954x.yaml#
> > > > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: pvccinfaon-pvccfa-cpu2@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> > > >  from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > > > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mp2973-pvccin-pvccfa-cpu2@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> > > >  from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > > > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: pvccinfaon-pvccfa-cpu1@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> > > >  from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > > > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mp2973-pvccin-pvccfa-cpu1@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> > > >  from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > > > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: pvccinfaon-pvccfa-cpu3@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> > > >  from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > > > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mp2973-pvccin-pvccfa-cpu3@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> > > >  from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > > > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: regulator@5f: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> > > >  from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > > > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: regulator@5f: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> > > >  from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > > > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: regulator@5f: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> > > >  from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > > > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: regulator@5f: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> > > >  from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > > > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: pvccinfaon-pvccfa-cpu0@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> > > >  from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > > > arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dtb: mp2973-pvccin-pvccfa-cpu0@58: 'regulators' does not match any of the regexes: 'pinctrl-[0-9]+'
> > > >  from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > >
> > > These still must be addressed as mentioned on v3 (with more specific
> > > comments regarding the infineon,ir38263 on v4). Please look through the
> > > binding documents for the affected nodes and make sure the nodes in
> > > your DTS conform to their definitions. You can check your work with
> > > `make CHECK_DTBS=y aspeed/aspeed-bmc-ibm-sbp1.dtb` prior to sending.
> >
> > These are the warnings coming for trivial devices. Even for regulator@5f
> >
> > grep -rsn mp2973 Documentation/
> > Documentation/devicetree/bindings/trivial-devices.yaml:286:
> > # Monolithic Power Systems Inc. multi-phase controller mp2973
> > Documentation/devicetree/bindings/trivial-devices.yaml:287: -
> > mps,mp2973
> >
>
> Right, but if they're generating warnings, then you haven't specified
> the nodes in accordance with the bindings. From here one of two things
> is the case:
>
>    1. The bindings' specifications are incomplete, and you need to
>       introduce patches updating them to match how you need to use the
>       hardware
>    2. Your devicetree is incorrect, and the unexpected properties need
>       to be removed from the listed nodes.
>
> The only third option is "don't use the hardware how you need to" (i.e.
> remove the unexpected properties despite needing them, because you
> don't want to update the bindings).
Will do what needs to be done.
Will introduce binding for those devices which need them.

Thanks a lot for your inputs

Regards,
Naresh
>
> Ultimately the tools are telling you something is wrong, and I need the
> warnings I've identified addressed before I can apply your patch,
> otherwise the hardware is not going to do what you might expect.
> > I've rebased it on top of for-next branch in [2]
> >
> > I rebased on top of [1] & the volume of output did reduce for CHECK_DTBS.
>
> Great :)
>
> Andrew
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
index 2f92b8ab08fa..c79c74ab3d78 100644
--- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
+++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
@@ -91,6 +91,7 @@  properties:
               - ibm,everest-bmc
               - ibm,fuji-bmc
               - ibm,rainier-bmc
+              - ibm,sbp1-bmc
               - ibm,system1-bmc
               - ibm,tacoma-bmc
               - inventec,starscream-bmc