diff mbox series

[v16,1/3] ARM: dts: aspeed: yosemite4: Revise i2c-mux devices

Message ID 20240906092438.1047225-2-Delphine_CC_Chiu@wiwynn.com
State New
Headers show
Series Add i2c-mux and eeprom devices for Meta Yosemite4 | expand

Commit Message

Delphine CC Chiu Sept. 6, 2024, 9:24 a.m. UTC 
From: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>

Revise Yosemite 4 devicetree for devices behind i2c-mux
- Add gpio and eeprom behind i2c-mux
- Remove redundant idle-state setting for i2c-mux
- Revise address of max31790 devices after i2c-mux.

Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
---
 .../aspeed/aspeed-bmc-facebook-yosemite4.dts  | 450 ++++++++++++++++--
 1 file changed, 411 insertions(+), 39 deletions(-)

Comments

Krzysztof Kozlowski Sept. 6, 2024, 10:04 a.m. UTC | #1 
On 06/09/2024 11:24, Delphine CC Chiu wrote:
> From: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
> 
> Revise Yosemite 4 devicetree for devices behind i2c-mux
> - Add gpio and eeprom behind i2c-mux
> - Remove redundant idle-state setting for i2c-mux
> - Revise address of max31790 devices after i2c-mux.
> 
> Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>

Missing SoB. On all your patchsets.

Best regards,
Krzysztof
Delphine CC Chiu Sept. 9, 2024, 1:34 a.m. UTC | #2 
> -----Original Message-----
> From: Krzysztof Kozlowski <krzk@kernel.org>
> Sent: Friday, September 6, 2024 6:04 PM
> To: Delphine_CC_Chiu/WYHQ/Wiwynn <Delphine_CC_Chiu@wiwynn.com>;
> patrick@stwcx.xyz; Rob Herring <robh@kernel.org>; Krzysztof Kozlowski
> <krzk+dt@kernel.org>; Conor Dooley <conor+dt@kernel.org>; Joel Stanley
> <joel@jms.id.au>; Andrew Jeffery <andrew@codeconstruct.com.au>
> Cc: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>;
> devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> linux-aspeed@lists.ozlabs.org; linux-kernel@vger.kernel.org
> Subject: Re: [PATCH v16 1/3] ARM: dts: aspeed: yosemite4: Revise i2c-mux
> devices
> 
>  [External Sender]
> 
>  [External Sender]
> 
> On 06/09/2024 11:24, Delphine CC Chiu wrote:
> > From: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
> >
> > Revise Yosemite 4 devicetree for devices behind i2c-mux
> > - Add gpio and eeprom behind i2c-mux
> > - Remove redundant idle-state setting for i2c-mux
> > - Revise address of max31790 devices after i2c-mux.
> >
> > Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
> 
> Missing SoB. On all your patchsets.
> 
> Best regards,
> Krzysztof
Hi Krzysztof,
Sorry to bother you with the previous version of the patches.
We are reorganizing the patches and will run dts check before sending
the patches to kernel org.

I will update the SoB in the commits in v17 patches. Thanks.
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index 98477792aa00..96039ffbf8ef 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -17,6 +17,29 @@  aliases {
 		serial6 = &uart7;
 		serial7 = &uart8;
 		serial8 = &uart9;
+
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+		i2c32 = &imux32;
+		i2c33 = &imux33;
+		i2c34 = &imux34;
+		i2c35 = &imux35;
+		i2c36 = &imux36;
+		i2c37 = &imux37;
 	};
 
 	chosen {
@@ -259,9 +282,117 @@  &i2c8 {
 	bus-frequency = <400000>;
 	i2c-mux@70 {
 		compatible = "nxp,pca9544";
-		idle-state = <0>;
 		i2c-mux-idle-disconnect;
 		reg = <0x70>;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
 	};
 };
 
@@ -270,26 +401,193 @@  &i2c9 {
 	bus-frequency = <400000>;
 	i2c-mux@71 {
 		compatible = "nxp,pca9544";
-		idle-state = <0>;
 		i2c-mux-idle-disconnect;
 		reg = <0x71>;
+
+		imux20: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+
+		imux21: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+
+		imux22: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+
+		imux23: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
 	};
 };
 
 &i2c10 {
 	status = "okay";
 	bus-frequency = <400000>;
+	i2c-mux@74 {
+		compatible = "nxp,pca9544";
+		i2c-mux-idle-disconnect;
+		reg = <0x74>;
+
+		imux28: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			gpio@20 {
+				compatible = "nxp,pca9506";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@21 {
+				compatible = "nxp,pca9506";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@22 {
+				compatible = "nxp,pca9506";
+				reg = <0x22>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@23 {
+				compatible = "nxp,pca9506";
+				reg = <0x23>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@24 {
+				compatible = "nxp,pca9506";
+				reg = <0x24>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+				"","","","",
+				"NIC0_MAIN_PWR_EN","NIC1_MAIN_PWR_EN",
+				"NIC2_MAIN_PWR_EN","NIC3_MAIN_PWR_EN",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+			};
+		};
+
+		imux29: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
 };
 
 &i2c11 {
 	status = "okay";
 	power-sensor@10 {
-		compatible = "adi, adm1272";
+		compatible = "adi,adm1272";
 		reg = <0x10>;
 	};
 
 	power-sensor@12 {
-		compatible = "adi, adm1272";
+		compatible = "adi,adm1272";
 		reg = <0x12>;
 	};
 
@@ -351,19 +649,54 @@  &i2c12 {
 	status = "okay";
 	bus-frequency = <400000>;
 
-	temperature-sensor@48 {
-		compatible = "ti,tmp75";
-		reg = <0x48>;
-	};
+	i2c-mux@70 {
+		compatible = "nxp,pca9544";
+		i2c-mux-idle-disconnect;
+		reg = <0x70>;
 
-	eeprom@50 {
-		compatible = "atmel,24c128";
-		reg = <0x50>;
-	};
+		imux34: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c64";
+				reg = <0x54>;
+			};
+
+			rtc@6f {
+				compatible = "nuvoton,nct3018y";
+				reg = <0x6f>;
+			};
+		};
+
+		imux35: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
 
-	rtc@6f {
-		compatible = "nuvoton,nct3018y";
-		reg = <0x6f>;
+		imux36: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux37: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
 	};
 };
 
@@ -440,16 +773,14 @@  eeprom@51 {
 		reg = <0x51>;
 	};
 
-	i2c-mux@71 {
-		compatible = "nxp,pca9846";
+	i2c-mux@74 {
+		compatible = "nxp,pca9546";
 		#address-cells = <1>;
 		#size-cells = <0>;
-
-		idle-state = <0>;
 		i2c-mux-idle-disconnect;
-		reg = <0x71>;
+		reg = <0x74>;
 
-		i2c@0 {
+		imux30: i2c@0 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
@@ -457,11 +788,11 @@  i2c@0 {
 			adc@1f {
 				compatible = "ti,adc128d818";
 				reg = <0x1f>;
-				ti,mode = /bits/ 8 <2>;
+				ti,mode = /bits/ 8 <1>;
 			};
 
 			pwm@20{
-				compatible = "max31790";
+				compatible = "maxim,max31790";
 				reg = <0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -470,11 +801,13 @@  pwm@20{
 			gpio@22{
 				compatible = "ti,tca6424";
 				reg = <0x22>;
+				gpio-controller;
+				#gpio-cells = <2>;
 			};
 
-			pwm@23{
-				compatible = "max31790";
-				reg = <0x23>;
+			pwm@2f{
+				compatible = "maxim,max31790";
+				reg = <0x2f>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 			};
@@ -499,19 +832,19 @@  gpio@61 {
 			};
 		};
 
-		i2c@1 {
+		imux31: i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <0>;
+			reg = <1>;
 
 			adc@1f {
 				compatible = "ti,adc128d818";
 				reg = <0x1f>;
-				ti,mode = /bits/ 8 <2>;
+				ti,mode = /bits/ 8 <1>;
 			};
 
 			pwm@20{
-				compatible = "max31790";
+				compatible = "maxim,max31790";
 				reg = <0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -520,11 +853,13 @@  pwm@20{
 			gpio@22{
 				compatible = "ti,tca6424";
 				reg = <0x22>;
+				gpio-controller;
+				#gpio-cells = <2>;
 			};
 
-			pwm@23{
-				compatible = "max31790";
-				reg = <0x23>;
+			pwm@2f{
+				compatible = "maxim,max31790";
+				reg = <0x2f>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 			};
@@ -554,12 +889,10 @@  i2c-mux@73 {
 		compatible = "nxp,pca9544";
 		#address-cells = <1>;
 		#size-cells = <0>;
-
-		idle-state = <0>;
 		i2c-mux-idle-disconnect;
 		reg = <0x73>;
 
-		i2c@0 {
+		imux32: i2c@0 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
@@ -570,10 +903,10 @@  adc@35 {
 			};
 		};
 
-		i2c@1 {
+		imux33: i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <0>;
+			reg = <1>;
 
 			adc@35 {
 				compatible = "maxim,max11617";
@@ -596,9 +929,48 @@  mctp@10 {
 
 	i2c-mux@72 {
 		compatible = "nxp,pca9544";
-		idle-state = <0>;
 		i2c-mux-idle-disconnect;
 		reg = <0x72>;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
 	};
 };