@@ -1479,7 +1479,7 @@ static int ast_udc_probe(struct platform_device *pdev)
struct ast_udc_dev *udc;
int rc;
- udc = devm_kzalloc(&pdev->dev, sizeof(struct ast_udc_dev), GFP_KERNEL);
+ udc = devm_kzalloc(dev, sizeof(struct ast_udc_dev), GFP_KERNEL);
if (!udc)
return -ENOMEM;
@@ -1494,32 +1494,32 @@ static int ast_udc_probe(struct platform_device *pdev)
udc->reg = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(udc->reg)) {
- dev_err(&pdev->dev, "Failed to map resources\n");
+ dev_err(dev, "Failed to map resources\n");
return PTR_ERR(udc->reg);
}
platform_set_drvdata(pdev, udc);
- udc->clk = devm_clk_get(&pdev->dev, NULL);
+ udc->clk = devm_clk_get(dev, NULL);
if (IS_ERR(udc->clk)) {
rc = PTR_ERR(udc->clk);
goto err;
}
rc = clk_prepare_enable(udc->clk);
if (rc) {
- dev_err(&pdev->dev, "Failed to enable clock (0x%x)\n", rc);
+ dev_err(dev, "Failed to enable clock (0x%x)\n", rc);
goto err;
}
/* Check if we need to limit the HW to USB1 */
- max_speed = usb_get_maximum_speed(&pdev->dev);
+ max_speed = usb_get_maximum_speed(dev);
if (max_speed != USB_SPEED_UNKNOWN && max_speed < USB_SPEED_HIGH)
udc->force_usb1 = true;
/*
* Allocate DMA buffers for all EPs in one chunk
*/
- udc->ep0_buf = dma_alloc_coherent(&pdev->dev,
+ udc->ep0_buf = dma_alloc_coherent(dev,
AST_UDC_EP_DMA_SIZE *
AST_UDC_NUM_ENDPOINTS,
&udc->ep0_buf_dma, GFP_KERNEL);
@@ -1534,7 +1534,7 @@ static int ast_udc_probe(struct platform_device *pdev)
*/
udc->desc_mode = AST_UDC_DESC_MODE;
- dev_info(&pdev->dev, "DMA %s\n", udc->desc_mode ?
+ dev_info(dev, "DMA %s\n", udc->desc_mode ?
"descriptor mode" : "single mode");
INIT_LIST_HEAD(&udc->gadget.ep_list);
@@ -1556,26 +1556,26 @@ static int ast_udc_probe(struct platform_device *pdev)
goto err;
}
- rc = devm_request_irq(&pdev->dev, udc->irq, ast_udc_isr, 0,
+ rc = devm_request_irq(dev, udc->irq, ast_udc_isr, 0,
KBUILD_MODNAME, udc);
if (rc) {
- dev_err(&pdev->dev, "Failed to request interrupt\n");
+ dev_err(dev, "Failed to request interrupt\n");
goto err;
}
- rc = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
+ rc = usb_add_gadget_udc(dev, &udc->gadget);
if (rc) {
- dev_err(&pdev->dev, "Failed to add gadget udc\n");
+ dev_err(dev, "Failed to add gadget udc\n");
goto err;
}
- dev_info(&pdev->dev, "Initialized udc in USB%s mode\n",
+ dev_info(dev, "Initialized udc in USB%s mode\n",
udc->force_usb1 ? "1" : "2");
return 0;
err:
- dev_err(&pdev->dev, "Failed to udc probe, rc:0x%x\n", rc);
+ dev_err(dev, "Failed to udc probe, rc:0x%x\n", rc);
ast_udc_remove(pdev);
return rc;
Use the defined variable 'dev' to make the code cleaner. Signed-off-by: tangbin <tangbin@cmss.chinamobile.com> --- drivers/usb/gadget/udc/aspeed_udc.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-)