diff mbox series

[v8,2/2] ARM: dts: aspeed: yosemite4: add Facebook Yosemite 4 BMC

Message ID 20230810034421.742166-3-Delphine_CC_Chiu@wiwynn.com
State Superseded, archived
Headers show
Series ARM: dts: Facebook Yosemite 4 platform | expand

Commit Message

Delphine CC Chiu Aug. 10, 2023, 3:44 a.m. UTC 
Add linux device tree entry for Yosemite 4 devices connected to BMC.
The Yosemite 4 is a Meta multi-node server platform, based on AST2600 SoC.

Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
---
Changelog:
v8 - Add description of Yosemite 4
   - Remove unsupported ncsi config
   - Revise i2c-mux config
   - Correct power sensor i2c address
   - Restore i2c 11 bus-frequency to default
v7 - Revise changelog format
v6 - Change project name from yosemitev4 to yosemite4
v5 - Revise rtc setting
   - Remove duplicated multi-master setting
v3 - Revise the bootargs to stdout-path
   - Revise i2c devices
v2 - Revise the DTS node name
---
 arch/arm/boot/dts/aspeed/Makefile             |   1 +
 .../aspeed/aspeed-bmc-facebook-yosemite4.dts  | 627 ++++++++++++++++++
 2 files changed, 628 insertions(+)
 create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts

Comments

Joel Stanley Aug. 10, 2023, 5:43 a.m. UTC | #1 
On Thu, 10 Aug 2023 at 03:44, Delphine CC Chiu
<Delphine_CC_Chiu@wiwynn.com> wrote:
>
> Add linux device tree entry for Yosemite 4 devices connected to BMC.
> The Yosemite 4 is a Meta multi-node server platform, based on AST2600 SoC.
>
> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
> ---
> Changelog:
> v8 - Add description of Yosemite 4
>    - Remove unsupported ncsi config
>    - Revise i2c-mux config
>    - Correct power sensor i2c address
>    - Restore i2c 11 bus-frequency to default
> v7 - Revise changelog format
> v6 - Change project name from yosemitev4 to yosemite4
> v5 - Revise rtc setting
>    - Remove duplicated multi-master setting
> v3 - Revise the bootargs to stdout-path
>    - Revise i2c devices
> v2 - Revise the DTS node name
> ---
>  arch/arm/boot/dts/aspeed/Makefile             |   1 +
>  .../aspeed/aspeed-bmc-facebook-yosemite4.dts  | 627 ++++++++++++++++++
>  2 files changed, 628 insertions(+)
>  create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
>
> diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
> index c68984322a86..5b9264b823f3 100644
> --- a/arch/arm/boot/dts/aspeed/Makefile
> +++ b/arch/arm/boot/dts/aspeed/Makefile
> @@ -26,6 +26,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
>         aspeed-bmc-facebook-wedge400.dtb \
>         aspeed-bmc-facebook-yamp.dtb \
>         aspeed-bmc-facebook-yosemitev2.dtb \
> +       aspeed-bmc-facebook-yosemite4.dtb \
>         aspeed-bmc-ibm-bonnell.dtb \
>         aspeed-bmc-ibm-everest.dtb \
>         aspeed-bmc-ibm-rainier.dtb \
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
> new file mode 100644
> index 000000000000..cb64417564bb
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
> @@ -0,0 +1,627 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +// Copyright 2022 Facebook Inc.
> +
> +/dts-v1/;
> +#include "aspeed-g6.dtsi"
> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +#include <dt-bindings/leds/leds-pca955x.h>
> +#include <dt-bindings/i2c/i2c.h>
> +
> +/ {
> +       model = "Facebook Yosemite 4 BMC";
> +       compatible = "facebook,yosemite4-bmc", "aspeed,ast2600";
> +
> +       aliases {
> +               serial4 = &uart5;
> +               serial5 = &uart6;
> +               serial6 = &uart7;
> +               serial7 = &uart8;
> +               serial8 = &uart9;
> +       };
> +
> +       chosen {
> +               stdout-path = "serial4:57600n8";
> +       };
> +
> +       memory@80000000 {
> +               device_type = "memory";
> +               reg = <0x80000000 0x80000000>;
> +       };
> +
> +       iio-hwmon {
> +               compatible = "iio-hwmon";
> +               io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
> +                               <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
> +                               <&adc1 0>, <&adc1 1>;
> +       };
> +};
> +
> +&uart1 {
> +       status = "okay";
> +};
> +
> +&uart2 {
> +       status = "okay";
> +};
> +
> +&uart3 {
> +       status = "okay";
> +};
> +
> +&uart4 {
> +       status = "okay";
> +};
> +
> +&uart5 {
> +       status = "okay";
> +};
> +
> +&uart6 {
> +       status = "okay";
> +};
> +
> +&uart7 {
> +       status = "okay";
> +};
> +
> +&uart8 {
> +       status = "okay";
> +};
> +
> +&uart9 {
> +       status = "okay";
> +};
> +
> +&wdt1 {
> +       status = "okay";
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_wdtrst1_default>;
> +       aspeed,reset-type = "soc";
> +       aspeed,external-signal;
> +       aspeed,ext-push-pull;
> +       aspeed,ext-active-high;
> +       aspeed,ext-pulse-duration = <256>;
> +};
> +
> +&mac2 {
> +       status = "okay";
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_rmii3_default>;
> +       no-hw-checksum;

Are you sure you need to set no-hw-checksum?

The driver when running on an ast2600 already disables tx hw checksum
if ncsi is enabled:

        /* AST2600 tx checksum with NCSI is broken */
        if (priv->use_ncsi && of_device_is_compatible(np, "aspeed,ast2600-mac"))
                netdev->hw_features &= ~NETIF_F_HW_CSUM;

The rest of the patch looks good.

Reviewed-by: Joel Stanley <joel@jms.id.au>

Cheers,

Joel



> +       use-ncsi;
> +       mlx,multi-host;
> +};
> +
> +&mac3 {
> +       status = "okay";
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_rmii4_default>;
> +       no-hw-checksum;
> +       use-ncsi;
> +       mlx,multi-host;
> +};
> +
> +&fmc {
> +       status = "okay";
> +       flash@0 {
> +               status = "okay";
> +               m25p,fast-read;
> +               label = "bmc";
> +               spi-rx-bus-width = <4>;
> +               spi-max-frequency = <50000000>;
> +#include "openbmc-flash-layout-64.dtsi"
> +       };
> +       flash@1 {
> +               status = "okay";
> +               m25p,fast-read;
> +               label = "bmc2";
> +               spi-rx-bus-width = <4>;
> +               spi-max-frequency = <50000000>;
> +       };
> +};
> +
> +&i2c0 {
> +       status = "okay";
> +       mctp-controller;
> +       bus-frequency = <400000>;
> +       multi-master;
> +
> +       mctp@10 {
> +               compatible = "mctp-i2c-controller";
> +               reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
> +       };
> +
> +       power-sensor@40 {
> +               compatible = "adi,adm1278";
> +               reg = <0x40>;
> +       };
> +};
> +
> +&i2c1 {
> +       status = "okay";
> +       mctp-controller;
> +       bus-frequency = <400000>;
> +       multi-master;
> +
> +       mctp@10 {
> +               compatible = "mctp-i2c-controller";
> +               reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
> +       };
> +
> +       power-sensor@40 {
> +               compatible = "adi,adm1278";
> +               reg = <0x40>;
> +       };
> +};
> +
> +&i2c2 {
> +       status = "okay";
> +       mctp-controller;
> +       bus-frequency = <400000>;
> +       multi-master;
> +
> +       mctp@10 {
> +               compatible = "mctp-i2c-controller";
> +               reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
> +       };
> +
> +       power-sensor@40 {
> +               compatible = "adi,adm1278";
> +               reg = <0x40>;
> +       };
> +};
> +
> +&i2c3 {
> +       status = "okay";
> +       mctp-controller;
> +       bus-frequency = <400000>;
> +       multi-master;
> +
> +       mctp@10 {
> +               compatible = "mctp-i2c-controller";
> +               reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
> +       };
> +
> +       power-sensor@40 {
> +               compatible = "adi,adm1278";
> +               reg = <0x40>;
> +       };
> +};
> +
> +&i2c4 {
> +       status = "okay";
> +       mctp-controller;
> +       bus-frequency = <400000>;
> +       multi-master;
> +
> +       mctp@10 {
> +               compatible = "mctp-i2c-controller";
> +               reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
> +       };
> +
> +       power-sensor@40 {
> +               compatible = "adi,adm1278";
> +               reg = <0x40>;
> +       };
> +};
> +
> +&i2c5 {
> +       status = "okay";
> +       mctp-controller;
> +       bus-frequency = <400000>;
> +       multi-master;
> +
> +       mctp@10 {
> +               compatible = "mctp-i2c-controller";
> +               reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
> +       };
> +
> +       power-sensor@40 {
> +               compatible = "adi,adm1278";
> +               reg = <0x40>;
> +       };
> +};
> +
> +&i2c6 {
> +       status = "okay";
> +       mctp-controller;
> +       bus-frequency = <400000>;
> +       multi-master;
> +
> +       mctp@10 {
> +               compatible = "mctp-i2c-controller";
> +               reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
> +       };
> +
> +       power-sensor@40 {
> +               compatible = "adi,adm1278";
> +               reg = <0x40>;
> +       };
> +};
> +
> +&i2c7 {
> +       status = "okay";
> +       mctp-controller;
> +       bus-frequency = <400000>;
> +       multi-master;
> +
> +       mctp@10 {
> +               compatible = "mctp-i2c-controller";
> +               reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
> +       };
> +
> +       power-sensor@40 {
> +               compatible = "adi,adm1278";
> +               reg = <0x40>;
> +       };
> +};
> +
> +&i2c8 {
> +       status = "okay";
> +       bus-frequency = <400000>;
> +       i2c-mux@70 {
> +               compatible = "nxp,pca9544";
> +               idle-state = <0>;
> +               i2c-mux-idle-disconnect;
> +               reg = <0x70>;
> +       };
> +};
> +
> +&i2c9 {
> +       status = "okay";
> +       bus-frequency = <400000>;
> +       i2c-mux@71 {
> +               compatible = "nxp,pca9544";
> +               idle-state = <0>;
> +               i2c-mux-idle-disconnect;
> +               reg = <0x71>;
> +       };
> +};
> +
> +&i2c10 {
> +       status = "okay";
> +       bus-frequency = <400000>;
> +};
> +
> +&i2c11 {
> +       status = "okay";
> +       bus-frequency = <400000>;
> +       power-sensor@10 {
> +               compatible = "adi, adm1272";
> +               reg = <0x10>;
> +       };
> +
> +       power-sensor@12 {
> +               compatible = "adi, adm1272";
> +               reg = <0x12>;
> +       };
> +
> +       gpio@20 {
> +               compatible = "nxp,pca9555";
> +               reg = <0x20>;
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +       };
> +
> +       gpio@21 {
> +               compatible = "nxp,pca9555";
> +               reg = <0x21>;
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +       };
> +
> +       gpio@22 {
> +               compatible = "nxp,pca9555";
> +               reg = <0x22>;
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +       };
> +
> +       gpio@23 {
> +               compatible = "nxp,pca9555";
> +               reg = <0x23>;
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +       };
> +
> +       temperature-sensor@48 {
> +               compatible = "ti,tmp75";
> +               reg = <0x48>;
> +       };
> +
> +       temperature-sensor@49 {
> +               compatible = "ti,tmp75";
> +               reg = <0x49>;
> +       };
> +
> +       temperature-sensor@4a {
> +               compatible = "ti,tmp75";
> +               reg = <0x4a>;
> +       };
> +
> +       temperature-sensor@4b {
> +               compatible = "ti,tmp75";
> +               reg = <0x4b>;
> +       };
> +
> +       eeprom@54 {
> +               compatible = "atmel,24c256";
> +               reg = <0x54>;
> +       };
> +};
> +
> +&i2c12 {
> +       status = "okay";
> +       bus-frequency = <400000>;
> +
> +       temperature-sensor@48 {
> +               compatible = "ti,tmp75";
> +               reg = <0x48>;
> +       };
> +
> +       eeprom@50 {
> +               compatible = "atmel,24c128";
> +               reg = <0x50>;
> +       };
> +
> +       rtc@6f {
> +               compatible = "nuvoton,nct3018y";
> +               reg = <0x6f>;
> +       };
> +};
> +
> +&i2c13 {
> +       status = "okay";
> +       bus-frequency = <400000>;
> +};
> +
> +&i2c14 {
> +       status = "okay";
> +       bus-frequency = <400000>;
> +       adc@1d {
> +               compatible = "ti,adc128d818";
> +               reg = <0x1d>;
> +               ti,mode = /bits/ 8 <2>;
> +       };
> +
> +       adc@35 {
> +               compatible = "ti,adc128d818";
> +               reg = <0x35>;
> +               ti,mode = /bits/ 8 <2>;
> +       };
> +
> +       adc@37 {
> +               compatible = "ti,adc128d818";
> +               reg = <0x37>;
> +               ti,mode = /bits/ 8 <2>;
> +       };
> +
> +       power-sensor@40 {
> +               compatible = "ti,ina230";
> +               reg = <0x40>;
> +       };
> +
> +       power-sensor@41 {
> +               compatible = "ti,ina230";
> +               reg = <0x41>;
> +       };
> +
> +       power-sensor@42 {
> +               compatible = "ti,ina230";
> +               reg = <0x42>;
> +       };
> +
> +       power-sensor@43 {
> +               compatible = "ti,ina230";
> +               reg = <0x43>;
> +       };
> +
> +       power-sensor@44 {
> +               compatible = "ti,ina230";
> +               reg = <0x44>;
> +       };
> +
> +       temperature-sensor@4e {
> +               compatible = "ti,tmp75";
> +               reg = <0x4e>;
> +       };
> +
> +       temperature-sensor@4f {
> +               compatible = "ti,tmp75";
> +               reg = <0x4f>;
> +       };
> +
> +       eeprom@51 {
> +               compatible = "atmel,24c128";
> +               reg = <0x51>;
> +       };
> +
> +       i2c-mux@71 {
> +               compatible = "nxp,pca9846";
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +
> +               idle-state = <0>;
> +               i2c-mux-idle-disconnect;
> +               reg = <0x71>;
> +
> +               i2c@0 {
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +                       reg = <0>;
> +
> +                       adc@1f {
> +                               compatible = "ti,adc128d818";
> +                               reg = <0x1f>;
> +                               ti,mode = /bits/ 8 <2>;
> +                       };
> +
> +                       pwm@20{
> +                               compatible = "max31790";
> +                               reg = <0x20>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                       };
> +
> +                       gpio@22{
> +                               compatible = "ti,tca6424";
> +                               reg = <0x22>;
> +                       };
> +
> +                       pwm@23{
> +                               compatible = "max31790";
> +                               reg = <0x23>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                       };
> +
> +                       adc@33 {
> +                               compatible = "maxim,max11615";
> +                               reg = <0x33>;
> +                       };
> +
> +                       eeprom@52 {
> +                               compatible = "atmel,24c128";
> +                               reg = <0x52>;
> +                       };
> +
> +                       gpio@61 {
> +                               compatible = "nxp,pca9552";
> +                               reg = <0x61>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                               gpio-controller;
> +                               #gpio-cells = <2>;
> +                       };
> +               };
> +
> +               i2c@1 {
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +                       reg = <0>;
> +
> +                       adc@1f {
> +                               compatible = "ti,adc128d818";
> +                               reg = <0x1f>;
> +                               ti,mode = /bits/ 8 <2>;
> +                       };
> +
> +                       pwm@20{
> +                               compatible = "max31790";
> +                               reg = <0x20>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                       };
> +
> +                       gpio@22{
> +                               compatible = "ti,tca6424";
> +                               reg = <0x22>;
> +                       };
> +
> +                       pwm@23{
> +                               compatible = "max31790";
> +                               reg = <0x23>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                       };
> +
> +                       adc@33 {
> +                               compatible = "maxim,max11615";
> +                               reg = <0x33>;
> +                       };
> +
> +                       eeprom@52 {
> +                               compatible = "atmel,24c128";
> +                               reg = <0x52>;
> +                       };
> +
> +                       gpio@61 {
> +                               compatible = "nxp,pca9552";
> +                               reg = <0x61>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                               gpio-controller;
> +                               #gpio-cells = <2>;
> +                       };
> +               };
> +       };
> +
> +       i2c-mux@73 {
> +               compatible = "nxp,pca9544";
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +
> +               idle-state = <0>;
> +               i2c-mux-idle-disconnect;
> +               reg = <0x73>;
> +
> +               i2c@0 {
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +                       reg = <0>;
> +
> +                       adc@35 {
> +                               compatible = "maxim,max11617";
> +                               reg = <0x35>;
> +                       };
> +               };
> +
> +               i2c@1 {
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +                       reg = <0>;
> +
> +                       adc@35 {
> +                               compatible = "maxim,max11617";
> +                               reg = <0x35>;
> +                       };
> +               };
> +       };
> +};
> +
> +&i2c15 {
> +       status = "okay";
> +       mctp-controller;
> +       multi-master;
> +       bus-frequency = <400000>;
> +
> +       mctp@10 {
> +               compatible = "mctp-i2c-controller";
> +               reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
> +       };
> +
> +       i2c-mux@72 {
> +               compatible = "nxp,pca9544";
> +               idle-state = <0>;
> +               i2c-mux-idle-disconnect;
> +               reg = <0x72>;
> +       };
> +};
> +
> +&adc0 {
> +       ref_voltage = <2500>;
> +       status = "okay";
> +       pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
> +                       &pinctrl_adc2_default &pinctrl_adc3_default
> +                       &pinctrl_adc4_default &pinctrl_adc5_default
> +                       &pinctrl_adc6_default &pinctrl_adc7_default>;
> +};
> +
> +&adc1 {
> +       ref_voltage = <2500>;
> +       status = "okay";
> +       pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default>;
> +};
> +
> +
> +&ehci0 {
> +       status = "okay";
> +};
> +
> +&ehci1 {
> +       status = "okay";
> +};
> +
> +&uhci {
> +       status = "okay";
> +};
> --
> 2.25.1
>
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index c68984322a86..5b9264b823f3 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -26,6 +26,7 @@  dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-facebook-wedge400.dtb \
 	aspeed-bmc-facebook-yamp.dtb \
 	aspeed-bmc-facebook-yosemitev2.dtb \
+	aspeed-bmc-facebook-yosemite4.dtb \
 	aspeed-bmc-ibm-bonnell.dtb \
 	aspeed-bmc-ibm-everest.dtb \
 	aspeed-bmc-ibm-rainier.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
new file mode 100644
index 000000000000..cb64417564bb
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -0,0 +1,627 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Yosemite 4 BMC";
+	compatible = "facebook,yosemite4-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+		serial5 = &uart6;
+		serial6 = &uart7;
+		serial7 = &uart8;
+		serial8 = &uart9;
+	};
+
+	chosen {
+		stdout-path = "serial4:57600n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+				<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+				<&adc1 0>, <&adc1 1>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&uart6 {
+	status = "okay";
+};
+
+&uart7 {
+	status = "okay";
+};
+
+&uart8 {
+	status = "okay";
+};
+
+&uart9 {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	no-hw-checksum;
+	use-ncsi;
+	mlx,multi-host;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	no-hw-checksum;
+	use-ncsi;
+	mlx,multi-host;
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc2";
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1278";
+		reg = <0x40>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1278";
+		reg = <0x40>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1278";
+		reg = <0x40>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1278";
+		reg = <0x40>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1278";
+		reg = <0x40>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1278";
+		reg = <0x40>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1278";
+		reg = <0x40>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1278";
+		reg = <0x40>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	bus-frequency = <400000>;
+	i2c-mux@70 {
+		compatible = "nxp,pca9544";
+		idle-state = <0>;
+		i2c-mux-idle-disconnect;
+		reg = <0x70>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+	bus-frequency = <400000>;
+	i2c-mux@71 {
+		compatible = "nxp,pca9544";
+		idle-state = <0>;
+		i2c-mux-idle-disconnect;
+		reg = <0x71>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+	bus-frequency = <400000>;
+};
+
+&i2c11 {
+	status = "okay";
+	bus-frequency = <400000>;
+	power-sensor@10 {
+		compatible = "adi, adm1272";
+		reg = <0x10>;
+	};
+
+	power-sensor@12 {
+		compatible = "adi, adm1272";
+		reg = <0x12>;
+	};
+
+	gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9555";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp75";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
+
+	temperature-sensor@4a {
+		compatible = "ti,tmp75";
+		reg = <0x4a>;
+	};
+
+	temperature-sensor@4b {
+		compatible = "ti,tmp75";
+		reg = <0x4b>;
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c256";
+		reg = <0x54>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	bus-frequency = <400000>;
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp75";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	rtc@6f {
+		compatible = "nuvoton,nct3018y";
+		reg = <0x6f>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+	bus-frequency = <400000>;
+};
+
+&i2c14 {
+	status = "okay";
+	bus-frequency = <400000>;
+	adc@1d {
+		compatible = "ti,adc128d818";
+		reg = <0x1d>;
+		ti,mode = /bits/ 8 <2>;
+	};
+
+	adc@35 {
+		compatible = "ti,adc128d818";
+		reg = <0x35>;
+		ti,mode = /bits/ 8 <2>;
+	};
+
+	adc@37 {
+		compatible = "ti,adc128d818";
+		reg = <0x37>;
+		ti,mode = /bits/ 8 <2>;
+	};
+
+	power-sensor@40 {
+		compatible = "ti,ina230";
+		reg = <0x40>;
+	};
+
+	power-sensor@41 {
+		compatible = "ti,ina230";
+		reg = <0x41>;
+	};
+
+	power-sensor@42 {
+		compatible = "ti,ina230";
+		reg = <0x42>;
+	};
+
+	power-sensor@43 {
+		compatible = "ti,ina230";
+		reg = <0x43>;
+	};
+
+	power-sensor@44 {
+		compatible = "ti,ina230";
+		reg = <0x44>;
+	};
+
+	temperature-sensor@4e {
+		compatible = "ti,tmp75";
+		reg = <0x4e>;
+	};
+
+	temperature-sensor@4f {
+		compatible = "ti,tmp75";
+		reg = <0x4f>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9846";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		idle-state = <0>;
+		i2c-mux-idle-disconnect;
+		reg = <0x71>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			adc@1f {
+				compatible = "ti,adc128d818";
+				reg = <0x1f>;
+				ti,mode = /bits/ 8 <2>;
+			};
+
+			pwm@20{
+				compatible = "max31790";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			gpio@22{
+				compatible = "ti,tca6424";
+				reg = <0x22>;
+			};
+
+			pwm@23{
+				compatible = "max31790";
+				reg = <0x23>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			adc@33 {
+				compatible = "maxim,max11615";
+				reg = <0x33>;
+			};
+
+			eeprom@52 {
+				compatible = "atmel,24c128";
+				reg = <0x52>;
+			};
+
+			gpio@61 {
+				compatible = "nxp,pca9552";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			adc@1f {
+				compatible = "ti,adc128d818";
+				reg = <0x1f>;
+				ti,mode = /bits/ 8 <2>;
+			};
+
+			pwm@20{
+				compatible = "max31790";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			gpio@22{
+				compatible = "ti,tca6424";
+				reg = <0x22>;
+			};
+
+			pwm@23{
+				compatible = "max31790";
+				reg = <0x23>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			adc@33 {
+				compatible = "maxim,max11615";
+				reg = <0x33>;
+			};
+
+			eeprom@52 {
+				compatible = "atmel,24c128";
+				reg = <0x52>;
+			};
+
+			gpio@61 {
+				compatible = "nxp,pca9552";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+	};
+
+	i2c-mux@73 {
+		compatible = "nxp,pca9544";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		idle-state = <0>;
+		i2c-mux-idle-disconnect;
+		reg = <0x73>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			adc@35 {
+				compatible = "maxim,max11617";
+				reg = <0x35>;
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			adc@35 {
+				compatible = "maxim,max11617";
+				reg = <0x35>;
+			};
+		};
+	};
+};
+
+&i2c15 {
+	status = "okay";
+	mctp-controller;
+	multi-master;
+	bus-frequency = <400000>;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9544";
+		idle-state = <0>;
+		i2c-mux-idle-disconnect;
+		reg = <0x72>;
+	};
+};
+
+&adc0 {
+	ref_voltage = <2500>;
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+			&pinctrl_adc2_default &pinctrl_adc3_default
+			&pinctrl_adc4_default &pinctrl_adc5_default
+			&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	ref_voltage = <2500>;
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default>;
+};
+
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};