@@ -1236,18 +1236,12 @@ FUNC_GROUP_DECL(SALT8, AA12);
FUNC_GROUP_DECL(WDTRST4, AA12);
#define AE12 196
-SIG_EXPR_LIST_DECL_SEMG(AE12, FWSPIDQ2, FWQSPID, FWSPID,
- SIG_DESC_SET(SCU438, 4));
SIG_EXPR_LIST_DECL_SESG(AE12, GPIOY4, GPIOY4);
-PIN_DECL_(AE12, SIG_EXPR_LIST_PTR(AE12, FWSPIDQ2),
- SIG_EXPR_LIST_PTR(AE12, GPIOY4));
+PIN_DECL_(AE12, SIG_EXPR_LIST_PTR(AE12, GPIOY4));
#define AF12 197
-SIG_EXPR_LIST_DECL_SEMG(AF12, FWSPIDQ3, FWQSPID, FWSPID,
- SIG_DESC_SET(SCU438, 5));
SIG_EXPR_LIST_DECL_SESG(AF12, GPIOY5, GPIOY5);
-PIN_DECL_(AF12, SIG_EXPR_LIST_PTR(AF12, FWSPIDQ3),
- SIG_EXPR_LIST_PTR(AF12, GPIOY5));
+PIN_DECL_(AF12, SIG_EXPR_LIST_PTR(AF12, GPIOY5));
#define AC12 198
SSSF_PIN_DECL(AC12, GPIOY6, FWSPIABR, SIG_DESC_SET(SCU438, 6));
@@ -1520,9 +1514,8 @@ SIG_EXPR_LIST_DECL_SEMG(Y4, EMMCDAT7, EMMCG8, EMMC, SIG_DESC_SET(SCU404, 3));
PIN_DECL_3(Y4, GPIO18E3, FWSPIDMISO, VBMISO, EMMCDAT7);
GROUP_DECL(FWSPID, Y1, Y2, Y3, Y4);
-GROUP_DECL(FWQSPID, Y1, Y2, Y3, Y4, AE12, AF12);
GROUP_DECL(EMMCG8, AB4, AA4, AC4, AA5, Y5, AB5, AB6, AC5, Y1, Y2, Y3, Y4);
-FUNC_DECL_2(FWSPID, FWSPID, FWQSPID);
+FUNC_DECL_1(FWSPID, FWSPID);
FUNC_GROUP_DECL(VB, Y1, Y2, Y3, Y4);
FUNC_DECL_3(EMMC, EMMCG1, EMMCG4, EMMCG8);
/*
@@ -1918,7 +1911,6 @@ static const struct aspeed_pin_group aspeed_g6_groups[] = {
ASPEED_PINCTRL_GROUP(FSI2),
ASPEED_PINCTRL_GROUP(FWSPIABR),
ASPEED_PINCTRL_GROUP(FWSPID),
- ASPEED_PINCTRL_GROUP(FWQSPID),
ASPEED_PINCTRL_GROUP(FWSPIWP),
ASPEED_PINCTRL_GROUP(GPIT0),
ASPEED_PINCTRL_GROUP(GPIT1),
FWSPIDQ2 and FWSPIDQ3 are not part of FWSPI18 interface so remove FWQSPID group in pinctrl dtsi. These pins must be used with the FWSPI pins that are dedicated for boot SPI interface which provides same 3.3v logic level. Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com> Fixes: 2eda1cdec49f ("pinctrl: aspeed: Add AST2600 pinmux support") --- drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c | 14 +++----------- 1 file changed, 3 insertions(+), 11 deletions(-)