[4/6] ARM: dts: aspeed: Add Facebook Cloudripper (AST2600) BMC

Message ID	20210728233755.17963-5-rentao.bupt@gmail.com
State	Not Applicable, archived
Headers	show Return-Path: <linux-aspeed-bounces+incoming=patchwork.ozlabs.org@lists.ozlabs.org> From: rentao.bupt@gmail.com To: Rob Herring <robh+dt@kernel.org>, Joel Stanley <joel@jms.id.au>, Andrew Jeffery <andrew@aj.id.au>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org, openbmc@lists.ozlabs.org, taoren@fb.com Subject: [PATCH 4/6] ARM: dts: aspeed: Add Facebook Cloudripper (AST2600) BMC Date: Wed, 28 Jul 2021 16:37:53 -0700 Message-Id: <20210728233755.17963-5-rentao.bupt@gmail.com> In-Reply-To: <20210728233755.17963-1-rentao.bupt@gmail.com> References: <20210728233755.17963-1-rentao.bupt@gmail.com> Precedence: list Errors-To: linux-aspeed-bounces+incoming=patchwork.ozlabs.org@lists.ozlabs.org Sender: "Linux-aspeed" <linux-aspeed-bounces+incoming=patchwork.ozlabs.org@lists.ozlabs.org>
Series	ARM: dts: Add Facebook AST2600 BMCs \| expand [0/6] ARM: dts: Add Facebook AST2600 BMCs [1/6] ARM: dts: Add Facebook BMC 128MB flash layout [2/6] ARM: dts: aspeed: wedge400: Use common flash layout [3/6] ARM: dts: aspeed: Common dtsi for Facebook AST2600 Network BMCs [4/6] ARM: dts: aspeed: Add Facebook Cloudripper (AST2600) BMC [5/6] ARM: dts: aspeed: Add Facebook Elbert (AST2600) BMC [6/6] ARM: dts: aspeed: Add Facebook Fuji (AST2600) BMC

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 90aed2c2959a..74c760038f28 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1409,6 +1409,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-arm-stardragon4800-rep2.dtb \ aspeed-bmc-asrock-e3c246d4i.dtb \ aspeed-bmc-bytedance-g220a.dtb \ + aspeed-bmc-facebook-cloudripper.dtb \ aspeed-bmc-facebook-cmm.dtb \ aspeed-bmc-facebook-galaxy100.dtb \ aspeed-bmc-facebook-minipack.dtb \ diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-cloudripper.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-cloudripper.dts new file mode 100644 index 000000000000..1a9808ba8107 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-cloudripper.dts @@ -0,0 +1,564 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2020 Facebook Inc. + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include "ast2600-facebook-netbmc-common.dtsi" + +/ { + model = "Facebook Cloudripper BMC"; + compatible = "facebook,cloudripper-bmc", "aspeed,ast2600"; + + aliases { + /* + * PCA9548 (1-0070) provides 8 channels connecting to + * SMB (Switch Main Board). + */ + i2c16 = &imux16; + i2c17 = &imux17; + i2c18 = &imux18; + i2c19 = &imux19; + i2c20 = &imux20; + i2c21 = &imux21; + i2c22 = &imux22; + i2c23 = &imux23; + + /* + * PCA9548 (2-0070) provides 8 channels connecting to + * SCM (System Controller Module). + */ + i2c24 = &imux24; + i2c25 = &imux25; + i2c26 = &imux26; + i2c27 = &imux27; + i2c28 = &imux28; + i2c29 = &imux29; + i2c30 = &imux30; + i2c31 = &imux31; + + /* + * PCA9548 (3-0070) provides 8 channels connecting to + * SMB (Switch Main Board). + */ + i2c32 = &imux32; + i2c33 = &imux33; + i2c34 = &imux34; + i2c35 = &imux35; + i2c36 = &imux36; + i2c37 = &imux37; + i2c38 = &imux38; + i2c39 = &imux39; + + /* + * PCA9548 (8-0070) provides 8 channels connecting to + * PDB (Power Delivery Board). + */ + i2c40 = &imux40; + i2c41 = &imux41; + i2c42 = &imux42; + i2c43 = &imux43; + i2c44 = &imux44; + i2c45 = &imux45; + i2c46 = &imux46; + i2c47 = &imux47; + + /* + * PCA9548 (15-0076) provides 8 channels connecting to + * FCM (Fan Controller Module). + */ + i2c48 = &imux48; + i2c49 = &imux49; + i2c50 = &imux50; + i2c51 = &imux51; + i2c52 = &imux52; + i2c53 = &imux53; + i2c54 = &imux54; + i2c55 = &imux55; + }; + + spi_gpio: spi-gpio { + num-chipselects = <2>; + cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>, + <&gpio0 ASPEED_GPIO(X, 1) GPIO_ACTIVE_HIGH>; + + eeprom@1 { + compatible = "atmel,at93c46d"; + spi-max-frequency = <250000>; + data-size = <16>; + spi-cs-high; + reg = <1>; + }; + }; +}; + +&spi1 { + status = "okay"; + + /* + * Customize spi1 flash memory size to 16MB (maximum flash size on + * the bus) to save vmalloc space. + */ + reg = < 0x1e630000 0xc4 + 0x30000000 0x1000000 >; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "spi1.0"; + spi-max-frequency = <5000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + flash1@0 { + reg = <0x0 0x1000000>; + label = "system-flash"; + }; + }; + }; +}; + +&ehci1 { + status = "okay"; +}; + +&mdio1 { + status = "okay"; +}; + +&mdio3 { + status = "okay"; + + ethphy1: ethernet-phy@13 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0d>; + }; +}; + +&mac3 { + phy-handle = <&ethphy1>; +}; + +&i2c0 { + multi-master; + bus-frequency = <1000000>; +}; + +&i2c1 { + /* + * PCA9548 (1-0070) provides 8 channels connecting to SMB (Switch + * Main Board). + */ + i2c-switch@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + imux16: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux17: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux18: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux19: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux20: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux21: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux22: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux23: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; +}; + +&i2c2 { + /* + * PCA9548 (2-0070) provides 8 channels connecting to SCM (System + * Controller Module). + */ + i2c-switch@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + imux24: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux25: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux26: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux27: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux28: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux29: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux30: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux31: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; +}; + +&i2c3 { + /* + * PCA9548 (3-0070) provides 8 channels connecting to SMB (Switch + * Main Board). + */ + i2c-switch@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + imux32: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux33: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux34: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux35: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux36: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux37: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux38: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux39: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; +}; + +&i2c6 { + lp5012@14 { + compatible = "ti,lp5012"; + reg = <0x14>; + #address-cells = <1>; + #size-cells = <0>; + + multi-led@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + color = <LED_COLOR_ID_MULTI>; + function = LED_FUNCTION_ACTIVITY; + label = "sys"; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_RED>; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_BLUE>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + }; + }; + + multi-led@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + color = <LED_COLOR_ID_MULTI>; + function = LED_FUNCTION_ACTIVITY; + label = "fan"; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_RED>; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_BLUE>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + }; + }; + + multi-led@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + color = <LED_COLOR_ID_MULTI>; + function = LED_FUNCTION_ACTIVITY; + label = "psu"; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_RED>; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_BLUE>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + }; + }; + + multi-led@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + color = <LED_COLOR_ID_MULTI>; + function = LED_FUNCTION_ACTIVITY; + label = "scm"; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_RED>; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_BLUE>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + }; + }; + }; +}; + +&i2c8 { + /* + * PCA9548 (8-0070) provides 8 channels connecting to PDB (Power + * Delivery Board). + */ + i2c-switch@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + imux40: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux41: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux42: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux43: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux44: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux45: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux46: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux47: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + + }; +}; + +&i2c15 { + /* + * PCA9548 (15-0076) provides 8 channels connecting to FCM (Fan + * Controller Module). + */ + i2c-switch@76 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x76>; + i2c-mux-idle-disconnect; + + imux48: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux49: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux50: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux51: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux52: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux53: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux54: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux55: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; +};

[4/6] ARM: dts: aspeed: Add Facebook Cloudripper (AST2600) BMC

Commit Message

Patch