diff mbox series

ARM: dts: aspeed: amd-ethanolx: Add GPIO line names

Message ID 20201111132133.1253-1-aladyshev22@gmail.com
State New
Headers show
Series ARM: dts: aspeed: amd-ethanolx: Add GPIO line names | expand

Commit Message

Konstantin Aladyshev Nov. 11, 2020, 1:21 p.m. UTC
Add GPIO line names for AMD EthanolX customer reference board.
It populates AST2500 GPIO lines (A0-A7 to AC0-AC7) with AMD EthanolX
designated names.

Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
---
 arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts | 44 +++++++++++++++++++
 1 file changed, 44 insertions(+)

Comments

Supreeth Venkatesh Nov. 11, 2020, 10:44 p.m. UTC | #1
On 11/11/20 7:21 AM, Konstantin Aladyshev wrote:
> [CAUTION: External Email]
> 
> Add GPIO line names for AMD EthanolX customer reference board.
> It populates AST2500 GPIO lines (A0-A7 to AC0-AC7) with AMD EthanolX
> designated names.
> 
> Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Supreeth Venkatesh <supreeth.venkatesh@amd.com>
> ---
>  arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts | 44 +++++++++++++++++++
>  1 file changed, 44 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
> index b93ed44eba0c..96ff0aea64e5 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
> @@ -97,6 +97,50 @@
>                      &pinctrl_adc4_default>;
>  };
> 
> +&gpio {
> +       status = "okay";
> +       gpio-line-names =
> +       /*A0-A7*/       "","","FAULT_LED","CHASSIS_ID_LED","","","","",
> +       /*B0-B7*/       "","","","","","","","",
> +       /*C0-C7*/       "CHASSIS_ID_BTN","INTRUDER","AC_LOSS","","","","","",
> +       /*D0-D7*/       "HDT_DBREQ","LOCAL_SPI_ROM_SEL","FPGA_SPI_ROM_SEL","JTAG_MUX_S",
> +                       "JTAG_MUX_OE","HDT_SEL","ASERT_WARM_RST_BTN","FPGA_RSVD",
> +       /*E0-E7*/       "","","MON_P0_PWR_BTN","MON_P0_RST_BTN","MON_P0_NMI_BTN",
> +                       "MON_P0_PWR_GOOD","MON_PWROK","MON_RESET",
> +       /*F0-F7*/       "MON_P0_PROCHOT","MON_P1_PROCHOT","MON_P0_THERMTRIP",
> +                       "MON_P1_THERMTRIP","P0_PRESENT","P1_PRESENT","MON_ATX_PWR_OK","",
> +       /*G0-G7*/       "BRD_REV_ID_3","BRD_REV_ID_2","BRD_REV_ID_1","BRD_REV_ID_0",
> +                       "P0_APML_ALERT","P1_APML_ALERT","FPGA ALERT","",
> +       /*H0-H7*/       "BRD_ID_0","BRD_ID_1","BRD_ID_2","BRD_ID_3",
> +                       "PCIE_DISCONNECTED","USB_DISCONNECTED","SPARE_0","SPARE_1",
> +       /*I0-I7*/       "","","","","","","","",
> +       /*J0-J7*/       "","","","","","","","",
> +       /*K0-K7*/       "","","","","","","","",
> +       /*L0-L7*/       "","","","","","","","",
> +       /*M0-M7*/       "ASSERT_PWR_BTN","ASSERT_RST_BTN","ASSERT_NMI_BTN",
> +                       "ASSERT_LOCAL_LOCK","ASSERT_P0_PROCHOT","ASSERT_P1_PROCHOT",
> +                       "ASSERT_CLR_CMOS","ASSERT_BMC_READY",
> +       /*N0-N7*/       "","","","","","","","",
> +       /*O0-O7*/       "","","","","","","","",
> +       /*P0-P7*/       "P0_VDD_CORE_RUN_VRHOT","P0_VDD_SOC_RUN_VRHOT",
> +                       "P0_VDD_MEM_ABCD_SUS_VRHOT","P0_VDD_MEM_EFGH_SUS_VRHOT",
> +                       "P1_VDD_CORE_RUN_VRHOT","P1_VDD_SOC_RUN_VRHOT",
> +                       "P1_VDD_MEM_ABCD_SUS_VRHOT","P1_VDD_MEM_EFGH_SUS_VRHOT",
> +       /*Q0-Q7*/       "","","","","","","","",
> +       /*R0-R7*/       "","","","","","","","",
> +       /*S0-S7*/       "","","","","","","","",
> +       /*T0-T7*/       "","","","","","","","",
> +       /*U0-U7*/       "","","","","","","","",
> +       /*V0-V7*/       "","","","","","","","",
> +       /*W0-W7*/       "","","","","","","","",
> +       /*X0-X7*/       "","","","","","","","",
> +       /*Y0-Y7*/       "","","","","","","","",
> +       /*Z0-Z7*/       "","","","","","","","",
> +       /*AA0-AA7*/     "","SENSOR THERM","","","","","","",
> +       /*AB0-AB7*/     "","","","","","","","",
> +       /*AC0-AC7*/     "","","","","","","","";
> +};
> +
>  //APML for P0
>  &i2c0 {
>         status = "okay";
> --
> 2.17.1
>
Joel Stanley Nov. 11, 2020, 11:28 p.m. UTC | #2
On Wed, 11 Nov 2020 at 22:44, Supreeth Venkatesh
<supreeth.venkatesh@amd.com> wrote:
>
>
>
> On 11/11/20 7:21 AM, Konstantin Aladyshev wrote:
> > [CAUTION: External Email]
> >
> > Add GPIO line names for AMD EthanolX customer reference board.
> > It populates AST2500 GPIO lines (A0-A7 to AC0-AC7) with AMD EthanolX
> > designated names.
> >
> > Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
> Reviewed-by: Supreeth Venkatesh <supreeth.venkatesh@amd.com>

Applied to dt-for-v5.11.

Thanks,

Joel

> > ---
> >  arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts | 44 +++++++++++++++++++
> >  1 file changed, 44 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
> > index b93ed44eba0c..96ff0aea64e5 100644
> > --- a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
> > +++ b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
> > @@ -97,6 +97,50 @@
> >                      &pinctrl_adc4_default>;
> >  };
> >
> > +&gpio {
> > +       status = "okay";
> > +       gpio-line-names =
> > +       /*A0-A7*/       "","","FAULT_LED","CHASSIS_ID_LED","","","","",
> > +       /*B0-B7*/       "","","","","","","","",
> > +       /*C0-C7*/       "CHASSIS_ID_BTN","INTRUDER","AC_LOSS","","","","","",
> > +       /*D0-D7*/       "HDT_DBREQ","LOCAL_SPI_ROM_SEL","FPGA_SPI_ROM_SEL","JTAG_MUX_S",
> > +                       "JTAG_MUX_OE","HDT_SEL","ASERT_WARM_RST_BTN","FPGA_RSVD",
> > +       /*E0-E7*/       "","","MON_P0_PWR_BTN","MON_P0_RST_BTN","MON_P0_NMI_BTN",
> > +                       "MON_P0_PWR_GOOD","MON_PWROK","MON_RESET",
> > +       /*F0-F7*/       "MON_P0_PROCHOT","MON_P1_PROCHOT","MON_P0_THERMTRIP",
> > +                       "MON_P1_THERMTRIP","P0_PRESENT","P1_PRESENT","MON_ATX_PWR_OK","",
> > +       /*G0-G7*/       "BRD_REV_ID_3","BRD_REV_ID_2","BRD_REV_ID_1","BRD_REV_ID_0",
> > +                       "P0_APML_ALERT","P1_APML_ALERT","FPGA ALERT","",
> > +       /*H0-H7*/       "BRD_ID_0","BRD_ID_1","BRD_ID_2","BRD_ID_3",
> > +                       "PCIE_DISCONNECTED","USB_DISCONNECTED","SPARE_0","SPARE_1",
> > +       /*I0-I7*/       "","","","","","","","",
> > +       /*J0-J7*/       "","","","","","","","",
> > +       /*K0-K7*/       "","","","","","","","",
> > +       /*L0-L7*/       "","","","","","","","",
> > +       /*M0-M7*/       "ASSERT_PWR_BTN","ASSERT_RST_BTN","ASSERT_NMI_BTN",
> > +                       "ASSERT_LOCAL_LOCK","ASSERT_P0_PROCHOT","ASSERT_P1_PROCHOT",
> > +                       "ASSERT_CLR_CMOS","ASSERT_BMC_READY",
> > +       /*N0-N7*/       "","","","","","","","",
> > +       /*O0-O7*/       "","","","","","","","",
> > +       /*P0-P7*/       "P0_VDD_CORE_RUN_VRHOT","P0_VDD_SOC_RUN_VRHOT",
> > +                       "P0_VDD_MEM_ABCD_SUS_VRHOT","P0_VDD_MEM_EFGH_SUS_VRHOT",
> > +                       "P1_VDD_CORE_RUN_VRHOT","P1_VDD_SOC_RUN_VRHOT",
> > +                       "P1_VDD_MEM_ABCD_SUS_VRHOT","P1_VDD_MEM_EFGH_SUS_VRHOT",
> > +       /*Q0-Q7*/       "","","","","","","","",
> > +       /*R0-R7*/       "","","","","","","","",
> > +       /*S0-S7*/       "","","","","","","","",
> > +       /*T0-T7*/       "","","","","","","","",
> > +       /*U0-U7*/       "","","","","","","","",
> > +       /*V0-V7*/       "","","","","","","","",
> > +       /*W0-W7*/       "","","","","","","","",
> > +       /*X0-X7*/       "","","","","","","","",
> > +       /*Y0-Y7*/       "","","","","","","","",
> > +       /*Z0-Z7*/       "","","","","","","","",
> > +       /*AA0-AA7*/     "","SENSOR THERM","","","","","","",
> > +       /*AB0-AB7*/     "","","","","","","","",
> > +       /*AC0-AC7*/     "","","","","","","","";
> > +};
> > +
> >  //APML for P0
> >  &i2c0 {
> >         status = "okay";
> > --
> > 2.17.1
> >
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
index b93ed44eba0c..96ff0aea64e5 100644
--- a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
@@ -97,6 +97,50 @@ 
 		     &pinctrl_adc4_default>;
 };
 
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"","","FAULT_LED","CHASSIS_ID_LED","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"CHASSIS_ID_BTN","INTRUDER","AC_LOSS","","","","","",
+	/*D0-D7*/	"HDT_DBREQ","LOCAL_SPI_ROM_SEL","FPGA_SPI_ROM_SEL","JTAG_MUX_S",
+			"JTAG_MUX_OE","HDT_SEL","ASERT_WARM_RST_BTN","FPGA_RSVD",
+	/*E0-E7*/	"","","MON_P0_PWR_BTN","MON_P0_RST_BTN","MON_P0_NMI_BTN",
+			"MON_P0_PWR_GOOD","MON_PWROK","MON_RESET",
+	/*F0-F7*/	"MON_P0_PROCHOT","MON_P1_PROCHOT","MON_P0_THERMTRIP",
+			"MON_P1_THERMTRIP","P0_PRESENT","P1_PRESENT","MON_ATX_PWR_OK","",
+	/*G0-G7*/	"BRD_REV_ID_3","BRD_REV_ID_2","BRD_REV_ID_1","BRD_REV_ID_0",
+			"P0_APML_ALERT","P1_APML_ALERT","FPGA ALERT","",
+	/*H0-H7*/	"BRD_ID_0","BRD_ID_1","BRD_ID_2","BRD_ID_3",
+			"PCIE_DISCONNECTED","USB_DISCONNECTED","SPARE_0","SPARE_1",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"ASSERT_PWR_BTN","ASSERT_RST_BTN","ASSERT_NMI_BTN",
+			"ASSERT_LOCAL_LOCK","ASSERT_P0_PROCHOT","ASSERT_P1_PROCHOT",
+			"ASSERT_CLR_CMOS","ASSERT_BMC_READY",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"P0_VDD_CORE_RUN_VRHOT","P0_VDD_SOC_RUN_VRHOT",
+			"P0_VDD_MEM_ABCD_SUS_VRHOT","P0_VDD_MEM_EFGH_SUS_VRHOT",
+			"P1_VDD_CORE_RUN_VRHOT","P1_VDD_SOC_RUN_VRHOT",
+			"P1_VDD_MEM_ABCD_SUS_VRHOT","P1_VDD_MEM_EFGH_SUS_VRHOT",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"","SENSOR THERM","","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
 //APML for P0
 &i2c0 {
 	status = "okay";