@@ -29,6 +29,7 @@
serial3 = &uart4;
serial4 = &uart5;
serial5 = &vuart;
+ peci0 = &peci0;
};
cpus {
@@ -295,6 +296,13 @@
};
};
+ peci: peci@1e78b000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1e78b000 0x60>;
+ };
+
uart2: serial@1e78d000 {
compatible = "ns16550a";
reg = <0x1e78d000 0x20>;
@@ -338,6 +346,24 @@
};
};
+&peci {
+ peci0: peci-bus@0 {
+ compatible = "aspeed,ast2400-peci";
+ reg = <0x0 0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <15>;
+ clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+ resets = <&syscon ASPEED_RESET_PECI>;
+ clock-frequency = <24000000>;
+ msg-timing = <1>;
+ addr-timing = <1>;
+ rd-sampling-point = <8>;
+ cmd-timeout-ms = <1000>;
+ status = "disabled";
+ };
+};
+
&i2c {
i2c_ic: interrupt-controller@0 {
#interrupt-cells = <1>;
@@ -29,6 +29,7 @@
serial3 = &uart4;
serial4 = &uart5;
serial5 = &vuart;
+ peci0 = &peci0;
};
cpus {
@@ -352,6 +353,13 @@
};
};
+ peci: peci@1e78b000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1e78b000 0x60>;
+ };
+
uart2: serial@1e78d000 {
compatible = "ns16550a";
reg = <0x1e78d000 0x20>;
@@ -395,6 +403,24 @@
};
};
+&peci {
+ peci0: peci-bus@0 {
+ compatible = "aspeed,ast2500-peci";
+ reg = <0x0 0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <15>;
+ clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+ resets = <&syscon ASPEED_RESET_PECI>;
+ clock-frequency = <24000000>;
+ msg-timing = <1>;
+ addr-timing = <1>;
+ rd-sampling-point = <8>;
+ cmd-timeout-ms = <1000>;
+ status = "disabled";
+ };
+};
+
&i2c {
i2c_ic: interrupt-controller@0 {
#interrupt-cells = <1>;