| Message ID | 20180413044039.11345-1-benh@kernel.crashing.org |
|---|---|
| State | Accepted, archived |
| Headers | show |
| Series | [1/2] ARM: dts: Add Aspeed SoC USB controllers to device-tree | expand |
On Fri, 13 Apr 2018, at 14:10, Benjamin Herrenschmidt wrote: > This adds the USB controllers to the DT template of the > AST24xx and AST25xx SoCs. > > This patch doesn't enable them by default on any board specific > .dts yet. This will be done when we have the necessary clock/reset > and pinmux support. In the meantime though, this will work if > u-boot configures things properly. > > For the AST2400 I only added pinmux definition for port 1 > which is dual USB1/USB2. There are additional USB1 only ports > that might require more work but I don't have HW to test at > hand so I'm leaving that to whoever cares. > > Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> > --- > arch/arm/boot/dts/aspeed-g4.dtsi | 27 +++++++++++++++++++++++++++ > arch/arm/boot/dts/aspeed-g5.dtsi | 40 ++++++++++++++++++++++++++++++++++++++++ > 2 files changed, 67 insertions(+) > > diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi > index ae2b8c952e80..c318e481db78 100644 > --- a/arch/arm/boot/dts/aspeed-g4.dtsi > +++ b/arch/arm/boot/dts/aspeed-g4.dtsi > @@ -108,6 +108,23 @@ > status = "disabled"; > }; > > + ehci0: usb@1e6a1000 { > + compatible = "aspeed,ast2400-ehci", "generic-ehci"; > + reg = <0x1e6a1000 0x100>; > + interrupts = <5>; > + clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; > + status = "disabled"; > + }; > + > + uhci: usb@1e6b0000 { > + compatible = "aspeed,ast2400-uhci", "generic-uhci"; > + reg = <0x1e6b0000 0x100>; > + interrupts = <14>; > + #ports = <3>; > + clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>; > + status = "disabled"; > + }; > + > apb { > compatible = "simple-bus"; > #address-cells = <1>; > @@ -1232,6 +1249,16 @@ > groups = "USBCKI"; > }; > > + pinctrl_usb2h_default: usb2h_default { > + function = "USB2H1"; > + groups = "USB2H1"; > + }; > + > + pinctrl_usb2d_default: usb2d_default { > + function = "USB2D1"; > + groups = "USB2D1"; > + }; > + > pinctrl_vgabios_rom_default: vgabios_rom_default { > function = "VGABIOS_ROM"; > groups = "VGABIOS_ROM"; > diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi > index 2477ebc11d9d..cebc19809174 100644 > --- a/arch/arm/boot/dts/aspeed-g5.dtsi > +++ b/arch/arm/boot/dts/aspeed-g5.dtsi > @@ -143,6 +143,31 @@ > status = "disabled"; > }; > > + ehci0: usb@1e6a1000 { > + compatible = "aspeed,ast2500-ehci", "generic-ehci"; > + reg = <0x1e6a1000 0x100>; > + interrupts = <5>; > + clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; > + status = "disabled"; > + }; > + > + ehci1: usb@1e6a3000 { > + compatible = "aspeed,ast2500-ehci", "generic-ehci"; > + reg = <0x1e6a3000 0x100>; > + interrupts = <13>; > + clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>; > + status = "disabled"; > + }; > + > + uhci: usb@1e6b0000 { > + compatible = "aspeed,ast2500-uhci", "generic-uhci"; > + reg = <0x1e6b0000 0x100>; > + interrupts = <14>; > + #ports = <2>; > + clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>; > + status = "disabled"; > + }; > + > apb { > compatible = "simple-bus"; > #address-cells = <1>; > @@ -1363,6 +1388,21 @@ > groups = "USBCKI"; > }; > > + pinctrl_usb2ah_default: usb2ah_default { > + function = "USB2AH"; > + groups = "USB2AH"; > + }; > + > + pinctrl_usb11bhid_default: usb11bhid_default { > + function = "USB11BHID"; > + groups = "USB11BHID"; > + }; > + > + pinctrl_usb2bh_default: usb2bh_default { > + function = "USB2BH"; > + groups = "USB2BH"; > + }; > + > pinctrl_vgabiosrom_default: vgabiosrom_default { > function = "VGABIOSROM"; > groups = "VGABIOSROM"; > -- > 2.14.3 >
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index ae2b8c952e80..c318e481db78 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -108,6 +108,23 @@ status = "disabled"; }; + ehci0: usb@1e6a1000 { + compatible = "aspeed,ast2400-ehci", "generic-ehci"; + reg = <0x1e6a1000 0x100>; + interrupts = <5>; + clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; + status = "disabled"; + }; + + uhci: usb@1e6b0000 { + compatible = "aspeed,ast2400-uhci", "generic-uhci"; + reg = <0x1e6b0000 0x100>; + interrupts = <14>; + #ports = <3>; + clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>; + status = "disabled"; + }; + apb { compatible = "simple-bus"; #address-cells = <1>; @@ -1232,6 +1249,16 @@ groups = "USBCKI"; }; + pinctrl_usb2h_default: usb2h_default { + function = "USB2H1"; + groups = "USB2H1"; + }; + + pinctrl_usb2d_default: usb2d_default { + function = "USB2D1"; + groups = "USB2D1"; + }; + pinctrl_vgabios_rom_default: vgabios_rom_default { function = "VGABIOS_ROM"; groups = "VGABIOS_ROM"; diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index 2477ebc11d9d..cebc19809174 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -143,6 +143,31 @@ status = "disabled"; }; + ehci0: usb@1e6a1000 { + compatible = "aspeed,ast2500-ehci", "generic-ehci"; + reg = <0x1e6a1000 0x100>; + interrupts = <5>; + clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; + status = "disabled"; + }; + + ehci1: usb@1e6a3000 { + compatible = "aspeed,ast2500-ehci", "generic-ehci"; + reg = <0x1e6a3000 0x100>; + interrupts = <13>; + clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>; + status = "disabled"; + }; + + uhci: usb@1e6b0000 { + compatible = "aspeed,ast2500-uhci", "generic-uhci"; + reg = <0x1e6b0000 0x100>; + interrupts = <14>; + #ports = <2>; + clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>; + status = "disabled"; + }; + apb { compatible = "simple-bus"; #address-cells = <1>; @@ -1363,6 +1388,21 @@ groups = "USBCKI"; }; + pinctrl_usb2ah_default: usb2ah_default { + function = "USB2AH"; + groups = "USB2AH"; + }; + + pinctrl_usb11bhid_default: usb11bhid_default { + function = "USB11BHID"; + groups = "USB11BHID"; + }; + + pinctrl_usb2bh_default: usb2bh_default { + function = "USB2BH"; + groups = "USB2BH"; + }; + pinctrl_vgabiosrom_default: vgabiosrom_default { function = "VGABIOSROM"; groups = "VGABIOSROM";
This adds the USB controllers to the DT template of the AST24xx and AST25xx SoCs. This patch doesn't enable them by default on any board specific .dts yet. This will be done when we have the necessary clock/reset and pinmux support. In the meantime though, this will work if u-boot configures things properly. For the AST2400 I only added pinmux definition for port 1 which is dual USB1/USB2. There are additional USB1 only ports that might require more work but I don't have HW to test at hand so I'm leaving that to whoever cares. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- arch/arm/boot/dts/aspeed-g4.dtsi | 27 +++++++++++++++++++++++++++ arch/arm/boot/dts/aspeed-g5.dtsi | 40 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 67 insertions(+)