mbox series

[v2,0/2] ARM: dts: aspeed: asrock: Add ASRock X570D4U BMC

Message ID 20231128232456.2932350-1-renze@rnplus.nl
Headers show
Series ARM: dts: aspeed: asrock: Add ASRock X570D4U BMC | expand

Message

Renze Nicolai Nov. 28, 2023, 11:23 p.m. UTC 
Hello,

These patches add a device-tree (and a bindings update) for the
Aspeed BMC on the ASRock X570D4U, so that it can be added as a
supported OpenBMC platform.

Changes since v1:
  - Fixed indentation
  - Added "aspeed,ast2500" compatible
  - Switched to lower case hex values
  - Added function and color attributes to the LEDs
  - Renamed LEDs to led0 and led1
  - Removed hogging of output-bmc-ready GPIO (should be set from userland instead)
  - Get MAC addresses of the ethernet interfaces from the FRU EEPROM
  - Add descriptions to the busses exposed by the I2C switch (i2c-1@70)
  - Add blank lines between nodes in fan section
  - Drop bootargs from chosen section

Greetings,
Renze Nicolai

Renze Nicolai (2):
  dt-bindings: arm: aspeed: add Asrock X570D4U board
  ARM: dts: aspeed: asrock: Add ASRock X570D4U BMC

 .../bindings/arm/aspeed/aspeed.yaml           |   1 +
 arch/arm/boot/dts/aspeed/Makefile             |   1 +
 .../dts/aspeed/aspeed-bmc-asrock-x570d4u.dts  | 359 ++++++++++++++++++
 3 files changed, 361 insertions(+)
 create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts