@@ -160,7 +160,7 @@ config TARGET_TB100
bool "Support tb100"
config TARGET_NSIM
- bool "Support standalone nSIM & Free nSIM"
+ bool "Support ARC simulation & prototyping platforms"
config TARGET_AXS101
bool "Support Synopsys Designware SDP board AXS101"
@@ -184,10 +184,10 @@ config TARGET_IOT_DEVKIT
endchoice
source "board/abilis/tb100/Kconfig"
-source "board/synopsys/Kconfig"
source "board/synopsys/axs10x/Kconfig"
source "board/synopsys/emsdp/Kconfig"
source "board/synopsys/hsdk/Kconfig"
source "board/synopsys/iot_devkit/Kconfig"
+source "board/synopsys/nsim/Kconfig"
endmenu
@@ -30,4 +30,28 @@
clock-frequency = <70000000>;
};
+ virtio0: virtio@f0100000 {
+ compatible = "virtio,mmio";
+ reg = <0xf0100000 0x2000>;
+ };
+
+ virtio1: virtio@f0102000 {
+ compatible = "virtio,mmio";
+ reg = <0xf0102000 0x2000>;
+ };
+
+ virtio2: virtio@f0104000 {
+ compatible = "virtio,mmio";
+ reg = <0xf0104000 0x2000>;
+ };
+
+ virtio3: virtio@f0106000 {
+ compatible = "virtio,mmio";
+ reg = <0xf0106000 0x2000>;
+ };
+
+ virtio4: virtio@f0108000 {
+ compatible = "virtio,mmio";
+ reg = <0xf0108000 0x2000>;
+ };
};
similarity index 74%
rename from board/synopsys/Kconfig
rename to board/synopsys/nsim/Kconfig
@@ -1,5 +1,8 @@
if TARGET_NSIM
+config SYS_BOARD
+ default "nsim"
+
config SYS_VENDOR
default "synopsys"
new file mode 100644
@@ -0,0 +1,6 @@
+ARC SIMULATION & PROTOTYPING PLATFORMS
+M: Alexey Brodkin <abrodkin@synopsys.com>
+S: Maintained
+F: arch/arc/dts/nsim.dts
+F: board/synopsys/nsim/
+F: configs/nsim_*_defconfig
new file mode 100644
@@ -0,0 +1,7 @@
+#
+# Copyright (C) 2020 Synopsys, Inc. All rights reserved.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += nsim.o
new file mode 100644
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Synopsys, Inc. All rights reserved.
+ */
+
+#include <common.h>
+#include <dm/device.h>
+#include <virtio_types.h>
+#include <virtio.h>
+
+int board_early_init_r(void)
+{
+ /*
+ * Make sure virtio bus is enumerated so that peripherals
+ * on the virtio bus can be discovered by their drivers
+ */
+ virtio_init();
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ printf("Board: ARC virtual or prototyping platform\n");
+ return 0;
+};
@@ -9,14 +9,23 @@ CONFIG_DEBUG_UART=y
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200n8"
+CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_SYS_PROMPT="nsim# "
+CONFIG_CMD_DM=y
# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
CONFIG_OF_CONTROL=y
CONFIG_OF_EMBED=y
CONFIG_DEFAULT_DEVICE_TREE="nsim"
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_DM=y
+CONFIG_BLK=y
+CONFIG_HAVE_BLOCK_DEVICE=y
+CONFIG_DM_ETH=y
CONFIG_DM_SERIAL=y
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_SYS_NS16550=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_NET=y
+CONFIG_VIRTIO_BLK=y
CONFIG_USE_PRIVATE_LIBGCC=y
Given now nsim_hs38 configuration is usable on QEMU and in QEMU we have Virtio working perfectly fine the next logical step is to add support of supported & known to work net & bkl to this config. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> --- Changes v1 -> v2: * Instead of adding IRQ parent it might be much cleaner solution to just get rid of "interrupt" properties in Virtio nodes. Again that's all OK for now since we don't really sync Linux .dts and U-Boot's ones. It's not that it's super good though but that's what we have today :) arch/arc/Kconfig | 4 ++-- arch/arc/dts/nsim.dts | 24 ++++++++++++++++++++++++ board/synopsys/{ => nsim}/Kconfig | 3 +++ board/synopsys/nsim/MAINTAINERS | 6 ++++++ board/synopsys/nsim/Makefile | 7 +++++++ board/synopsys/nsim/nsim.c | 26 ++++++++++++++++++++++++++ configs/nsim_hs38_defconfig | 9 +++++++++ 7 files changed, 77 insertions(+), 2 deletions(-) rename board/synopsys/{ => nsim}/Kconfig (74%) create mode 100644 board/synopsys/nsim/MAINTAINERS create mode 100644 board/synopsys/nsim/Makefile create mode 100644 board/synopsys/nsim/nsim.c