diff mbox

arc: vdk: Fix support of UIO

Message ID 1490290485-16332-1-git-send-email-abrodkin@synopsys.com
State New
Headers show

Commit Message

Alexey Brodkin March 23, 2017, 5:34 p.m. UTC
MotherBoard section has its "ranges" set to 0xE000_0000-0xF000_0000.
But UIO node maps 4 different areas in different memory locations
and all outside MB's ranges.

That obviously breaks UIO mappings in runtime.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Ruud Derwig <rderwig@synopsys.com>
Cc: stable@vger.kernel.org
---
 arch/arc/boot/dts/vdk_axs10x_mb.dtsi | 20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

Comments

Vineet Gupta March 23, 2017, 5:37 p.m. UTC | #1
+CC Jos !

-Vineet

On 03/23/2017 10:34 AM, Alexey Brodkin wrote:
> MotherBoard section has its "ranges" set to 0xE000_0000-0xF000_0000.
> But UIO node maps 4 different areas in different memory locations
> and all outside MB's ranges.
>
> That obviously breaks UIO mappings in runtime.
>
> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
> Cc: Vineet Gupta <vgupta@synopsys.com>
> Cc: Ruud Derwig <rderwig@synopsys.com>
> Cc: stable@vger.kernel.org
> ---
>  arch/arc/boot/dts/vdk_axs10x_mb.dtsi | 20 +++++++++++++-------
>  1 file changed, 13 insertions(+), 7 deletions(-)
>
> diff --git a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
> index f0df59b23e21..459fc656b759 100644
> --- a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
> +++ b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
> @@ -112,13 +112,19 @@
>  			interrupts = <7>;
>  			bus-width = <4>;
>  		};
> +	};
>  
> -		/* Embedded Vision subsystem UIO mappings; only relevant for EV VDK */
> -		uio_ev: uio@0xD0000000 {
> -			compatible = "generic-uio";
> -			reg = <0xD0000000 0x2000 0xD1000000 0x2000 0x90000000 0x10000000 0xC0000000 0x10000000>;
> -			reg-names = "ev_gsa", "ev_ctrl", "ev_shared_mem", "ev_code_mem";
> -			interrupts = <23>;
> -		};
> +	/*
> +	 * Embedded Vision subsystem UIO mappings; only relevant for EV VDK
> +	 *
> +	 * This node is intentionally put outside of MB above becase
> +	 * it maps areas outside of MB's 0xEz-0xFz.
> +	 */
> +	uio_ev: uio@0xD0000000 {
> +		compatible = "generic-uio";
> +		reg = <0xD0000000 0x2000 0xD1000000 0x2000 0x90000000 0x10000000 0xC0000000 0x10000000>;
> +		reg-names = "ev_gsa", "ev_ctrl", "ev_shared_mem", "ev_code_mem";
> +		interrupt-parent = <&mb_intc>;
> +		interrupts = <23>;
>  	};
>  };
Vineet Gupta March 24, 2017, 8:35 p.m. UTC | #2
On 03/23/2017 10:34 AM, Alexey Brodkin wrote:
> MotherBoard section has its "ranges" set to 0xE000_0000-0xF000_0000.
> But UIO node maps 4 different areas in different memory locations
> and all outside MB's ranges.
> 
> That obviously breaks UIO mappings in runtime.
> 
> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
> Cc: Vineet Gupta <vgupta@synopsys.com>
> Cc: Ruud Derwig <rderwig@synopsys.com>
> Cc: stable@vger.kernel.org


Added to for-curr.

Thx,
-Vineet
diff mbox

Patch

diff --git a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
index f0df59b23e21..459fc656b759 100644
--- a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
@@ -112,13 +112,19 @@ 
 			interrupts = <7>;
 			bus-width = <4>;
 		};
+	};
 
-		/* Embedded Vision subsystem UIO mappings; only relevant for EV VDK */
-		uio_ev: uio@0xD0000000 {
-			compatible = "generic-uio";
-			reg = <0xD0000000 0x2000 0xD1000000 0x2000 0x90000000 0x10000000 0xC0000000 0x10000000>;
-			reg-names = "ev_gsa", "ev_ctrl", "ev_shared_mem", "ev_code_mem";
-			interrupts = <23>;
-		};
+	/*
+	 * Embedded Vision subsystem UIO mappings; only relevant for EV VDK
+	 *
+	 * This node is intentionally put outside of MB above becase
+	 * it maps areas outside of MB's 0xEz-0xFz.
+	 */
+	uio_ev: uio@0xD0000000 {
+		compatible = "generic-uio";
+		reg = <0xD0000000 0x2000 0xD1000000 0x2000 0x90000000 0x10000000 0xC0000000 0x10000000>;
+		reg-names = "ev_gsa", "ev_ctrl", "ev_shared_mem", "ev_code_mem";
+		interrupt-parent = <&mb_intc>;
+		interrupts = <23>;
 	};
 };