@@ -410,15 +410,9 @@ config ARC_HAS_DIV_REM
bool "Insn: div, divu, rem, remu"
default y
-config ARC_HAS_RTC
- bool "Local 64-bit r/o cycle counter"
- default n
- depends on !SMP
-
-config ARC_HAS_GFRC
- bool "SMP synchronized 64-bit cycle counter"
+config ARC_TIMERS_64BIT
+ bool "64-bit r/o cycle counters RTC (up) and GFRC (smp)"
default y
- depends on SMP
config ARC_NUMBER_OF_INTERRUPTS
int "Number of interrupts"
@@ -21,7 +21,7 @@ CONFIG_MODULES=y
CONFIG_ARC_PLAT_SIM=y
CONFIG_ISA_ARCV2=y
CONFIG_SMP=y
-# CONFIG_ARC_HAS_GFRC is not set
+# CONFIG_ARC_TIMERS_64BIT is not set
CONFIG_ARC_BUILTIN_DTB_NAME="nsimosci_hs_idu"
CONFIG_PREEMPT=y
# CONFIG_COMPACTION is not set
@@ -15,7 +15,7 @@ CONFIG_ARC_PLAT_AXS10X=y
CONFIG_AXS103=y
CONFIG_ISA_ARCV2=y
CONFIG_SMP=y
-# CONFIG_ARC_HAS_GFRC is not set
+# CONFIG_ARC_TIMERS_64BIT is not set
CONFIG_ARC_UBOOT_SUPPORT=y
CONFIG_ARC_BUILTIN_DTB_NAME="vdk_hs38_smp"
CONFIG_PREEMPT=y
@@ -239,8 +239,8 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
n += scnprintf(buf + n, len - n, "Timers\t\t: %s%s%s%s%s%s\nISA Extn\t: ",
IS_AVAIL1(cpu->extn.timer0, "Timer0 "),
IS_AVAIL1(cpu->extn.timer1, "Timer1 "),
- IS_AVAIL2(cpu->extn.rtc, "RTC [UP 64-bit] ", CONFIG_ARC_HAS_RTC),
- IS_AVAIL2(cpu->extn.gfrc, "GFRC [SMP 64-bit] ", CONFIG_ARC_HAS_GFRC));
+ IS_AVAIL2(cpu->extn.rtc, "RTC [UP 64-bit] ", CONFIG_ARC_TIMERS_64BIT),
+ IS_AVAIL2(cpu->extn.gfrc, "GFRC [SMP 64-bit] ", CONFIG_ARC_TIMERS_64BIT));
n += i = scnprintf(buf + n, len - n, "%s%s%s%s%s",
IS_AVAIL2(cpu->isa.atomic, "atomic ", CONFIG_ARC_HAS_LLSC),
@@ -81,7 +81,7 @@ static int noinline arc_get_timer_clk(struct device_node *node)
/********** Clock Source Device *********/
-#ifdef CONFIG_ARC_HAS_GFRC
+#ifdef CONFIG_ARC_TIMERS_64BIT
static cycle_t arc_read_gfrc(struct clocksource *cs)
{
@@ -128,10 +128,6 @@ static int __init arc_cs_setup_gfrc(struct device_node *node)
}
CLOCKSOURCE_OF_DECLARE(arc_gfrc, "snps,archs-timer-gfrc", arc_cs_setup_gfrc);
-#endif
-
-#ifdef CONFIG_ARC_HAS_RTC
-
#define AUX_RTC_CTRL 0x103
#define AUX_RTC_LOW 0x104
#define AUX_RTC_HIGH 0x105
The original distinction was done as they were deveoped at different times and primarily becuse they are specific to UP (RTC) and SMP (GFRC). But given that driver now handles that at runtime, (i.e. not allowing RTC as clocksource in SMP), we can simplify things a bit. Signed-off-by: Vineet Gupta <vgupta@synopsys.com> --- arch/arc/Kconfig | 10 ++-------- arch/arc/configs/nsimosci_hs_smp_defconfig | 2 +- arch/arc/configs/vdk_hs38_smp_defconfig | 2 +- arch/arc/kernel/setup.c | 4 ++-- arch/arc/kernel/time.c | 6 +----- 5 files changed, 7 insertions(+), 17 deletions(-)