| Message ID | ca6275903f462763ec15e3c0edb63167afb75a15.1515107619.git.sandeepsheriker.mallikarjun@microchip.com |
|---|---|
| State | Changes Requested |
| Delegated to: | John Crispin |
| Headers | show |
| Series | [LEDE-DEV,1/1] at91: kernel configuration | expand |
On 01/05/2018 12:14 AM, Sandeep Sheriker Mallikarjun wrote: > 1. enabled DMA controller options > 2. Enabled CMA options > 3. enabled VFP options > 4. Add Atmel SD/MMC Driver > > Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com> > --- > target/linux/at91/sama5/config-default | 43 ++++++++++++++++++++++++++++++++++ > 1 file changed, 43 insertions(+) > > diff --git a/target/linux/at91/sama5/config-default b/target/linux/at91/sama5/config-default > index 00d4cf9..736f76b 100644 > --- a/target/linux/at91/sama5/config-default > +++ b/target/linux/at91/sama5/config-default > @@ -34,6 +34,7 @@ CONFIG_MMC_SDHCI=y > CONFIG_MMC_SDHCI_IO_ACCESSORS=y > CONFIG_MMC_SDHCI_OF_AT91=y > CONFIG_MMC_SDHCI_PLTFM=y > +CONFIG_MMC_ATMELMCI=y > CONFIG_OUTER_CACHE=y > CONFIG_OUTER_CACHE_SYNC=y > CONFIG_PINCTRL_AT91PIO4=y > @@ -48,5 +49,47 @@ CONFIG_SOC_SAMA5D3=y > CONFIG_SOC_SAMA5D4=y > CONFIG_SOC_SAM_V7=y > CONFIG_SPLIT_PTLOCK_CPUS=4 > +CONFIG_DMA_SHARED_BUFFER=y > +CONFIG_DMA_CMA=y > +CONFIG_SCSI_DMA=y > +CONFIG_VIDEOBUF2_DMA_CONTIG=y > +CONFIG_SND_DMAENGINE_PCM=y > +CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y > +CONFIG_SND_ATMEL_SOC_DMA=y > +CONFIG_SND_ATMEL_SOC_SSC_DMA=y > +CONFIG_DMA_ENGINE=y > +CONFIG_DMA_OF=y > +CONFIG_AT_HDMAC=y > +CONFIG_AT_XDMAC=y > +CONFIG_HAS_DMA=y > +CONFIG_CMA=y > +# CONFIG_CMA_DEBUG is not set > +CONFIG_CMA_DEBUGFS=y > +CONFIG_CMA_AREAS=7 > +CONFIG_DMA_CMA=y > +# > +# Default contiguous memory area size: > +# > +CONFIG_CMA_SIZE_MBYTES=16 > +CONFIG_CMA_SIZE_SEL_MBYTES=y > +# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set > +# CONFIG_CMA_SIZE_SEL_MIN is not set > +# CONFIG_CMA_SIZE_SEL_MAX is not set > +CONFIG_CMA_ALIGNMENT=8 > + > +CONFIG_BCMA_POSSIBLE=y > +# CONFIG_BCMA is not set > +CONFIG_DRM_GEM_CMA_HELPER=y > +CONFIG_DRM_KMS_CMA_HELPER=y > +ONFIG_DST_CACHE=y > +CONFIG_DCACHE_WORD_ACCESS=y > +# > +# At least one emulation must be selected > +# > +CONFIG_VFP=y > +CONFIG_VFPv3=y > +CONFIG_NEON=y > +CONFIG_KERNEL_MODE_NEON=y > + > # CONFIG_SWP_EMULATE is not set > # CONFIG_THUMB2_KERNEL is not set > Please refresh this with "make kernel_oldconfig CONFIG_TARGET=subtarget" This should order the configuration correctly and remove unneeded parts. Hauke
diff --git a/target/linux/at91/sama5/config-default b/target/linux/at91/sama5/config-default index 00d4cf9..736f76b 100644 --- a/target/linux/at91/sama5/config-default +++ b/target/linux/at91/sama5/config-default @@ -34,6 +34,7 @@ CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_IO_ACCESSORS=y CONFIG_MMC_SDHCI_OF_AT91=y CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_ATMELMCI=y CONFIG_OUTER_CACHE=y CONFIG_OUTER_CACHE_SYNC=y CONFIG_PINCTRL_AT91PIO4=y @@ -48,5 +49,47 @@ CONFIG_SOC_SAMA5D3=y CONFIG_SOC_SAMA5D4=y CONFIG_SOC_SAM_V7=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_DMA_SHARED_BUFFER=y +CONFIG_DMA_CMA=y +CONFIG_SCSI_DMA=y +CONFIG_VIDEOBUF2_DMA_CONTIG=y +CONFIG_SND_DMAENGINE_PCM=y +CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y +CONFIG_SND_ATMEL_SOC_DMA=y +CONFIG_SND_ATMEL_SOC_SSC_DMA=y +CONFIG_DMA_ENGINE=y +CONFIG_DMA_OF=y +CONFIG_AT_HDMAC=y +CONFIG_AT_XDMAC=y +CONFIG_HAS_DMA=y +CONFIG_CMA=y +# CONFIG_CMA_DEBUG is not set +CONFIG_CMA_DEBUGFS=y +CONFIG_CMA_AREAS=7 +CONFIG_DMA_CMA=y +# +# Default contiguous memory area size: +# +CONFIG_CMA_SIZE_MBYTES=16 +CONFIG_CMA_SIZE_SEL_MBYTES=y +# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set +# CONFIG_CMA_SIZE_SEL_MIN is not set +# CONFIG_CMA_SIZE_SEL_MAX is not set +CONFIG_CMA_ALIGNMENT=8 + +CONFIG_BCMA_POSSIBLE=y +# CONFIG_BCMA is not set +CONFIG_DRM_GEM_CMA_HELPER=y +CONFIG_DRM_KMS_CMA_HELPER=y +ONFIG_DST_CACHE=y +CONFIG_DCACHE_WORD_ACCESS=y +# +# At least one emulation must be selected +# +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_NEON=y +CONFIG_KERNEL_MODE_NEON=y + # CONFIG_SWP_EMULATE is not set # CONFIG_THUMB2_KERNEL is not set
1. enabled DMA controller options 2. Enabled CMA options 3. enabled VFP options 4. Add Atmel SD/MMC Driver Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com> --- target/linux/at91/sama5/config-default | 43 ++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+)