@@ -171,7 +171,6 @@
partition0,2@0x00180000 {
label = "device-tree";
reg = <0x00180000 0x00020000>;
- read-only;
};
partition0,3@0x001a0000 {
@@ -22,6 +22,10 @@ define Build/dtb
$(call Image/BuildDTB,../dts/$(DEVICE_DTS).dts,$@.dtb,,--space $(DTB_SIZE))
endef
+define Build/export-dtb
+ cp $(IMAGE_KERNEL).dtb $@
+endef
+
ifeq ($(SUBTARGET),nand)
define Image/cpiogz
@@ -186,13 +190,14 @@ define Device/WNDR4700
BLOCKSIZE := 128k
DTB_SIZE := 131008
IMAGE_SIZE := 24960k
- IMAGES := factory.img sysupgrade.tar
+ IMAGES := factory.img sysupgrade.tar kernel.dtb
KERNEL_SIZE := 1920k
KERNEL := dtb | kernel-bin | lzma | uImage lzma | pad-offset $$(BLOCKSIZE) 64 | append-fakerootfs
KERNEL_INITRAMFS := kernel-bin | gzip | dtb | wndr4700-specialImage gzip
IMAGE/factory.img := create-uImage-dtb | append-kernel | pad-to 2M | append-ubi | \
netgear-dni | check-size $$$$(IMAGE_SIZE)
IMAGE/sysupgrade.tar := sysupgrade-tar
+ IMAGE/kernel.dtb := export-dtb | uImage none
NETGEAR_BOARD_ID := WNDR4700
NETGEAR_HW_ID := 29763875+128+256
UBINIZE_OPTS := -E 5
@@ -230,10 +235,6 @@ define Build/hdd-img
$(if $(CONFIG_TARGET_IMAGES_GZIP),gzip -9n -c $@ > $(BIN_DIR)/$(notdir $@).gz)
endef
-define Build/export-dtb
- cp $(IMAGE_KERNEL).dtb $@
-endef
-
define Device/MyBookLiveDefault
IMAGE_SIZE := 48m
BLOCKSIZE := 1k
Currently, the device-tree partition is marked as read-only. Hence, userspace tools like mtd can't write into the partition. This however will be necessary in case the DTB needs to be updated. This patch also adds the kernel.dtb image, so the compiled DTB is exported as a file and available in the binary directory along the firmware images. Note: the u-boot does expects the dtb to be a uimage. To update the dtb manually: 1. copy the generated dtb to the router. 2. mtd erase /dev/mtd2 3. mtd write wndr4700.dtb /dev/mtd2 Signed-off-by: Christian Lamparter <chunkeey@gmail.com> --- target/linux/apm821xx/dts/wndr4700.dts | 1 - target/linux/apm821xx/image/Makefile | 11 ++++++----- 2 files changed, 6 insertions(+), 6 deletions(-)