diff mbox series

[LEDE-DEV] ipq806x: cleanup kernel config

Message ID 1526561729-32032-1-git-send-email-rjangir@codeaurora.org
State Superseded
Headers show
Series [LEDE-DEV] ipq806x: cleanup kernel config | expand

Commit Message

Ram Chandra Jangir May 17, 2018, 12:55 p.m. UTC 
Disable MSM8960, MSM8974 and APQ8084
 - since these are different SoC's than IPQ806x
Removed unrequired serial configs
 - since ipq806x uses SERIAL_MSM only

Signed-off-by: Ram Chandra Jangir <rjangir@codeaurora.org>
---
 target/linux/ipq806x/config-4.14 | 22 ++++++++--------------
 1 file changed, 8 insertions(+), 14 deletions(-)
diff mbox series

Patch

diff --git a/target/linux/ipq806x/config-4.14 b/target/linux/ipq806x/config-4.14
index 8970f19..8d31e4f 100644
--- a/target/linux/ipq806x/config-4.14
+++ b/target/linux/ipq806x/config-4.14
@@ -1,7 +1,7 @@ 
 CONFIG_ALIGNMENT_TRAP=y
 # CONFIG_AMBA_PL08X is not set
-CONFIG_APQ_GCC_8084=y
-CONFIG_APQ_MMCC_8084=y
+# CONFIG_APQ_GCC_8084 is not set
+# CONFIG_APQ_MMCC_8084 is not set
 CONFIG_AR8216_PHY=y
 CONFIG_ARCH_CLOCKSOURCE_DATA=y
 CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
@@ -141,12 +141,7 @@  CONFIG_CRYPTO_WORKQUEUE=y
 CONFIG_CRYPTO_XTS=y
 CONFIG_DCACHE_WORD_ACCESS=y
 CONFIG_DEBUG_GPIO=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_INCLUDE="debug/msm.S"
-CONFIG_DEBUG_QCOM_UARTDM=y
 # CONFIG_DEBUG_UART_8250 is not set
-CONFIG_DEBUG_UART_PHYS=0x16340000
-CONFIG_DEBUG_UART_VIRT=0xf6340000
 CONFIG_DEBUG_UNCOMPRESS=y
 # CONFIG_DEBUG_USER is not set
 CONFIG_DMADEVICES=y
@@ -295,14 +290,14 @@  CONFIG_MODULES_USE_ELF_REL=y
 CONFIG_MSM_BUS_SCALING=y
 CONFIG_MSM_GCC_8660=y
 # CONFIG_MSM_GCC_8916 is not set
-CONFIG_MSM_GCC_8960=y
-CONFIG_MSM_GCC_8974=y
+# CONFIG_MSM_GCC_8960 is not set
+# CONFIG_MSM_GCC_8974 is not set
 # CONFIG_MSM_GCC_8994 is not set
 # CONFIG_MSM_GCC_8996 is not set
 # CONFIG_MSM_IOMMU is not set
 # CONFIG_MSM_LCC_8960 is not set
-CONFIG_MSM_MMCC_8960=y
-CONFIG_MSM_MMCC_8974=y
+# CONFIG_MSM_MMCC_8960 is not set
+# CONFIG_MSM_MMCC_8974 is not set
 # CONFIG_MSM_MMCC_8996 is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_M25P80=y
@@ -374,7 +369,7 @@  CONFIG_PHY_QCOM_IPQ806X_SATA=y
 # CONFIG_PHY_QCOM_QUSB2 is not set
 # CONFIG_PHY_QCOM_UFS is not set
 CONFIG_PINCTRL=y
-CONFIG_PINCTRL_APQ8064=y
+# CONFIG_PINCTRL_APQ8064 is not set
 # CONFIG_PINCTRL_APQ8084 is not set
 # CONFIG_PINCTRL_IPQ4019 is not set
 CONFIG_PINCTRL_IPQ8064=y
@@ -386,7 +381,7 @@  CONFIG_PINCTRL_MSM=y
 # CONFIG_PINCTRL_MSM8960 is not set
 # CONFIG_PINCTRL_MSM8994 is not set
 # CONFIG_PINCTRL_MSM8996 is not set
-CONFIG_PINCTRL_MSM8X74=y
+# CONFIG_PINCTRL_MSM8X74 is not set
 # CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set
 # CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set
 # CONFIG_PL330_DMA is not set
@@ -444,7 +439,6 @@  CONFIG_RWSEM_SPIN_ON_OWNER=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 # CONFIG_SCHED_INFO is not set
 # CONFIG_SCSI_DMA is not set
-CONFIG_SERIAL_8250_FSL=y
 # CONFIG_SERIAL_AMBA_PL011 is not set
 CONFIG_SERIAL_MSM=y
 CONFIG_SERIAL_MSM_CONSOLE=y