diff --git a/target/linux/ipq806x/config-4.14 b/target/linux/ipq806x/config-4.14
new file mode 100644
index 0000000..8970f19
--- /dev/null
+++ b/target/linux/ipq806x/config-4.14
@@ -0,0 +1,502 @@
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_AMBA_PL08X is not set
+CONFIG_APQ_GCC_8084=y
+CONFIG_APQ_MMCC_8084=y
+CONFIG_AR8216_PHY=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
+CONFIG_ARCH_HAS_SG_CHAIN=y
+CONFIG_ARCH_HAS_TICK_BROADCAST=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+# CONFIG_ARCH_MDM9615 is not set
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MSM8960=y
+CONFIG_ARCH_MSM8974=y
+CONFIG_ARCH_MSM8X60=y
+CONFIG_ARCH_MULTIPLATFORM=y
+# CONFIG_ARCH_MULTI_CPU_AUTO is not set
+CONFIG_ARCH_MULTI_V6_V7=y
+CONFIG_ARCH_MULTI_V7=y
+CONFIG_ARCH_NR_GPIO=0
+CONFIG_ARCH_QCOM=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
+CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
+CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_ARM=y
+CONFIG_ARM_AMBA=y
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ARCH_TIMER=y
+CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
+# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set
+CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE=y
+CONFIG_ARM_CPUIDLE=y
+CONFIG_ARM_CPU_SUSPEND=y
+# CONFIG_ARM_CPU_TOPOLOGY is not set
+CONFIG_ARM_GIC=y
+CONFIG_ARM_HAS_SG_CHAIN=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+# CONFIG_ARM_LPAE is not set
+CONFIG_ARM_PATCH_IDIV=y
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+CONFIG_ARM_QCOM_CPUFREQ=y
+CONFIG_ARM_QCOM_CPUIDLE=y
+# CONFIG_ARM_SMMU is not set
+# CONFIG_ARM_SP805_WATCHDOG is not set
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_ARM_VIRT_EXT=y
+# CONFIG_BINFMT_FLAT is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_MQ_PCI=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_BOUNCE=y
+CONFIG_BUS_TOPOLOGY_ADHOC=y
+# CONFIG_CACHE_L2X0 is not set
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLKSRC_OF=y
+CONFIG_CLKSRC_PROBE=y
+CONFIG_CLKSRC_QCOM=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_COMMON_CLK=y
+CONFIG_COMMON_CLK_QCOM=y
+CONFIG_CPUFREQ_DT=y
+CONFIG_CPUFREQ_DT_PLATDEV=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_GOV_ATTR_SET=y
+CONFIG_CPU_FREQ_GOV_COMMON=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_HAS_ASID=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_PM=y
+CONFIG_CPU_RMAP=y
+CONFIG_CPU_THERMAL=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_V7=y
+CONFIG_CRC16=y
+# CONFIG_CRC32_SARWATE is not set
+CONFIG_CRC32_SLICEBY8=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_DEV_QCE=y
+CONFIG_CRYPTO_DRBG=y
+CONFIG_CRYPTO_DRBG_HMAC=y
+CONFIG_CRYPTO_DRBG_MENU=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_JITTERENTROPY=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_NULL2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_RNG_DEFAULT=y
+CONFIG_CRYPTO_SEQIV=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_XTS=y
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_LL_INCLUDE="debug/msm.S"
+CONFIG_DEBUG_QCOM_UARTDM=y
+# CONFIG_DEBUG_UART_8250 is not set
+CONFIG_DEBUG_UART_PHYS=0x16340000
+CONFIG_DEBUG_UART_VIRT=0xf6340000
+CONFIG_DEBUG_UNCOMPRESS=y
+# CONFIG_DEBUG_USER is not set
+CONFIG_DMADEVICES=y
+CONFIG_DMA_ENGINE=y
+CONFIG_DMA_OF=y
+CONFIG_DMA_VIRTUAL_CHANNELS=y
+CONFIG_DTC=y
+CONFIG_DT_IDLE_STATES=y
+# CONFIG_DWMAC_DWC_QOS_ETH is not set
+# CONFIG_DWMAC_GENERIC is not set
+CONFIG_DWMAC_IPQ806X=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_EDAC_ATOMIC_SCRUB=y
+CONFIG_EDAC_SUPPORT=y
+CONFIG_ETHERNET_PACKET_MANGLE=y
+CONFIG_FIXED_PHY=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_EARLY_IOREMAP=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_MSI_IRQ=y
+CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PHY=y
+CONFIG_GENERIC_PINCONF=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIOLIB_IRQCHIP=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_ARCH_AUDITSYSCALL=y
+CONFIG_HAVE_ARCH_BITREVERSE=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_PFN_VALID=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_ARM_ARCH_TIMER=y
+CONFIG_HAVE_ARM_SMCCC=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_CBPF_JIT=y
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_CLK_PREPARE=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_SMP=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_UID16=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HIGHMEM=y
+# CONFIG_HIGHPTE is not set
+CONFIG_HWMON=y
+CONFIG_HWSPINLOCK=y
+CONFIG_HWSPINLOCK_QCOM=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_MSM=y
+CONFIG_HZ_FIXED=0
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_QUP=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IOMMU_HELPER=y
+# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
+# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
+CONFIG_IOMMU_SUPPORT=y
+# CONFIG_IPQ_GCC_4019 is not set
+CONFIG_IPQ_GCC_806X=y
+# CONFIG_IPQ_GCC_8074 is not set
+# CONFIG_IPQ_LCC_806X is not set
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_DOMAIN_HIERARCHY=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+CONFIG_KPSS_XCC=y
+CONFIG_KRAITCC=y
+CONFIG_KRAIT_CLOCKS=y
+CONFIG_KRAIT_L2_ACCESSORS=y
+CONFIG_LIBFDT=y
+CONFIG_LOCKUP_DETECTOR=y
+CONFIG_LOCK_SPIN_ON_OWNER=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_MDIO_BITBANG=y
+CONFIG_MDIO_BOARDINFO=y
+CONFIG_MDIO_GPIO=y
+# CONFIG_MDM_GCC_9615 is not set
+# CONFIG_MDM_LCC_9615 is not set
+# CONFIG_MFD_MAX77620 is not set
+CONFIG_MFD_QCOM_RPM=y
+# CONFIG_MFD_SPMI_PMIC is not set
+CONFIG_MFD_SYSCON=y
+CONFIG_MIGHT_HAVE_CACHE_L2X0=y
+CONFIG_MIGHT_HAVE_PCI=y
+CONFIG_MMC=y
+CONFIG_MMC_ARMMMCI=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=16
+CONFIG_MMC_QCOM_DML=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_MSM=y
+# CONFIG_MMC_SDHCI_PCI is not set
+CONFIG_MMC_SDHCI_PLTFM=y
+# CONFIG_MMC_TIFM_SD is not set
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MSM_BUS_SCALING=y
+CONFIG_MSM_GCC_8660=y
+# CONFIG_MSM_GCC_8916 is not set
+CONFIG_MSM_GCC_8960=y
+CONFIG_MSM_GCC_8974=y
+# CONFIG_MSM_GCC_8994 is not set
+# CONFIG_MSM_GCC_8996 is not set
+# CONFIG_MSM_IOMMU is not set
+# CONFIG_MSM_LCC_8960 is not set
+CONFIG_MSM_MMCC_8960=y
+CONFIG_MSM_MMCC_8974=y
+# CONFIG_MSM_MMCC_8996 is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_NAND_QCOM=y
+# CONFIG_MTD_PHYSMAP_OF_VERSATILE is not set
+CONFIG_MTD_QCOM_SMEM_PARTS=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_SPLIT_FIRMWARE=y
+CONFIG_MTD_SPLIT_FIT_FW=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_BEB_LIMIT=20
+CONFIG_MTD_UBI_BLOCK=y
+# CONFIG_MTD_UBI_FASTMAP is not set
+# CONFIG_MTD_UBI_GLUEBI is not set
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MULTI_IRQ_HANDLER=y
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEON=y
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_HWMON=y
+CONFIG_NET_DSA_QCA8K=y
+CONFIG_NET_DSA_TAG_QCA=y
+CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NET_PTP_CLASSIFY=y
+CONFIG_NET_SWITCHDEV=y
+CONFIG_NLS=y
+CONFIG_NO_BOOTMEM=y
+CONFIG_NO_HZ=y
+CONFIG_NO_HZ_COMMON=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_NR_CPUS=4
+CONFIG_NVMEM=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_ADDRESS_PCI=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_NET=y
+CONFIG_OF_PCI=y
+CONFIG_OF_PCI_IRQ=y
+CONFIG_OF_RESERVED_MEM=y
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_PADATA=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PCI=y
+CONFIG_PCIEAER=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIE_DW=y
+CONFIG_PCIE_QCOM=y
+CONFIG_PCI_DEBUG=y
+CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DOMAINS_GENERIC=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_MSI_IRQ_DOMAIN=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+# CONFIG_PHY_QCOM_APQ8064_SATA is not set
+CONFIG_PHY_QCOM_IPQ806X_SATA=y
+# CONFIG_PHY_QCOM_QMP is not set
+# CONFIG_PHY_QCOM_QUSB2 is not set
+# CONFIG_PHY_QCOM_UFS is not set
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_APQ8064=y
+# CONFIG_PINCTRL_APQ8084 is not set
+# CONFIG_PINCTRL_IPQ4019 is not set
+CONFIG_PINCTRL_IPQ8064=y
+# CONFIG_PINCTRL_IPQ8074 is not set
+# CONFIG_PINCTRL_MDM9615 is not set
+CONFIG_PINCTRL_MSM=y
+# CONFIG_PINCTRL_MSM8660 is not set
+# CONFIG_PINCTRL_MSM8916 is not set
+# CONFIG_PINCTRL_MSM8960 is not set
+# CONFIG_PINCTRL_MSM8994 is not set
+# CONFIG_PINCTRL_MSM8996 is not set
+CONFIG_PINCTRL_MSM8X74=y
+# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set
+# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set
+# CONFIG_PL330_DMA is not set
+CONFIG_PM_OPP=y
+CONFIG_POWER_RESET=y
+# CONFIG_POWER_RESET_BRCMKONA is not set
+CONFIG_POWER_RESET_MSM=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_PPS=y
+CONFIG_PRINTK_TIME=y
+CONFIG_PTP_1588_CLOCK=y
+CONFIG_QCOM_ADM=y
+CONFIG_QCOM_BAM_DMA=y
+CONFIG_QCOM_CLK_RPM=y
+# CONFIG_QCOM_EBI2 is not set
+CONFIG_QCOM_GDSC=y
+CONFIG_QCOM_GSBI=y
+CONFIG_QCOM_HFPLL=y
+# CONFIG_QCOM_IOMMU is not set
+CONFIG_QCOM_PM=y
+# CONFIG_QCOM_Q6V5_PIL is not set
+CONFIG_QCOM_QFPROM=y
+CONFIG_QCOM_RPMCC=y
+CONFIG_QCOM_SCM=y
+CONFIG_QCOM_SCM_32=y
+# CONFIG_QCOM_SMD is not set
+CONFIG_QCOM_SMEM=y
+# CONFIG_QCOM_SMP2P is not set
+# CONFIG_QCOM_SMSM is not set
+CONFIG_QCOM_TCSR=y
+CONFIG_QCOM_TSENS=y
+# CONFIG_QCOM_WCNSS_PIL is not set
+CONFIG_QCOM_WDT=y
+# CONFIG_QRTR is not set
+CONFIG_RAS=y
+CONFIG_RATIONAL=y
+CONFIG_RCU_CPU_STALL_TIMEOUT=21
+CONFIG_RCU_STALL_COMMON=y
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_REGMAP_SPI=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_QCOM_RPM=y
+# CONFIG_REGULATOR_QCOM_SPMI is not set
+CONFIG_RESET_CONTROLLER=y
+CONFIG_RFS_ACCEL=y
+# CONFIG_RPMSG_QCOM_SMD is not set
+CONFIG_RPS=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_DRV_CMOS is not set
+CONFIG_RTC_I2C_AND_SPI=y
+CONFIG_RWSEM_SPIN_ON_OWNER=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+# CONFIG_SCHED_INFO is not set
+# CONFIG_SCSI_DMA is not set
+CONFIG_SERIAL_8250_FSL=y
+# CONFIG_SERIAL_AMBA_PL011 is not set
+CONFIG_SERIAL_MSM=y
+CONFIG_SERIAL_MSM_CONSOLE=y
+CONFIG_SMP=y
+CONFIG_SMP_ON_UP=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_SPI=y
+# CONFIG_SPI_CADENCE_QUADSPI is not set
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_QUP=y
+CONFIG_SPMI=y
+CONFIG_SPMI_MSM_PMIC_ARB=y
+CONFIG_SRCU=y
+CONFIG_STMMAC_ETH=y
+CONFIG_STMMAC_PLATFORM=y
+CONFIG_SWCONFIG=y
+CONFIG_SWCONFIG_LEDS=y
+CONFIG_SWIOTLB=y
+CONFIG_SWPHY=y
+CONFIG_SWP_EMULATE=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_THERMAL=y
+CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
+CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
+CONFIG_THERMAL_GOV_STEP_WISE=y
+CONFIG_THERMAL_HWMON=y
+CONFIG_THERMAL_OF=y
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TREE_RCU=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+CONFIG_UEVENT_HELPER_PATH=""
+CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
+CONFIG_USB=y
+CONFIG_USB_COMMON=y
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_QCOM_8X16_PHY is not set
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_UHCI_HCD is not set
+CONFIG_USE_OF=y
+CONFIG_VDSO=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_XPS=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
new file mode 100644
index 0000000..a3df829
--- /dev/null
+++ b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -0,0 +1,250 @@
+#include "qcom-ipq8064-v1.0.dtsi"
+
+/ {
+	model = "Qualcomm IPQ8064/AP148";
+	compatible = "qcom,ipq8064-ap148", "qcom,ipq8064";
+
+	memory@0 {
+		reg = <0x42000000 0x1e000000>;
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		rsvd@41200000 {
+			reg = <0x41200000 0x300000>;
+			no-map;
+		};
+	};
+
+	aliases {
+		serial0 = &gsbi4_serial;
+		mdio-gpio0 = &mdio0;
+	};
+
+	chosen {
+		linux,stdout-path = "serial0:115200n8";
+	};
+
+	soc {
+		pinmux@800000 {
+			i2c4_pins: i2c4_pinmux {
+				pins = "gpio12", "gpio13";
+				function = "gsbi4";
+				bias-disable;
+			};
+
+			spi_pins: spi_pins {
+				mux {
+					pins = "gpio18", "gpio19", "gpio21";
+					function = "gsbi5";
+					drive-strength = <10>;
+					bias-none;
+				};
+			};
+			nand_pins: nand_pins {
+				mux {
+					pins = "gpio34", "gpio35", "gpio36",
+					       "gpio37", "gpio38", "gpio39",
+					       "gpio40", "gpio41", "gpio42",
+					       "gpio43", "gpio44", "gpio45",
+					       "gpio46", "gpio47";
+					function = "nand";
+					drive-strength = <10>;
+					bias-disable;
+				};
+				pullups {
+					pins = "gpio39";
+					bias-pull-up;
+				};
+				hold {
+					pins = "gpio40", "gpio41", "gpio42",
+					       "gpio43", "gpio44", "gpio45",
+					       "gpio46", "gpio47";
+					bias-bus-hold;
+				};
+			};
+
+			mdio0_pins: mdio0_pins {
+				mux {
+					pins = "gpio0", "gpio1";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+
+			rgmii2_pins: rgmii2_pins {
+				mux {
+					pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
+					       "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
+					function = "rgmii2";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+		};
+
+		gsbi@16300000 {
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+			status = "ok";
+			serial@16340000 {
+				status = "ok";
+			};
+
+			/*
+			* The i2c device on gsbi4 should not be enabled.
+			* On ipq806x designs gsbi4 i2c is meant for exclusive
+			* RPM usage. Turning this on in kernel manifests as
+			* i2c failure for the RPM.
+			*/
+		};
+
+		gsbi5: gsbi@1a200000 {
+			qcom,mode = <GSBI_PROT_SPI>;
+			status = "ok";
+
+			spi4: spi@1a280000 {
+				status = "ok";
+				spi-max-frequency = <50000000>;
+
+				pinctrl-0 = <&spi_pins>;
+				pinctrl-names = "default";
+
+				cs-gpios = <&qcom_pinmux 20 0>;
+
+				flash: m25p80@0 {
+					compatible = "s25fl256s1";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+
+					partitions {
+						compatible = "qcom,smem";
+					};
+				};
+			};
+		};
+
+		sata-phy@1b400000 {
+			status = "ok";
+		};
+
+		sata@29000000 {
+			status = "ok";
+		};
+
+		phy@100f8800 {		/* USB3 port 1 HS phy */
+			status = "ok";
+		};
+
+		phy@100f8830 {		/* USB3 port 1 SS phy */
+			status = "ok";
+		};
+
+		phy@110f8800 {		/* USB3 port 0 HS phy */
+			status = "ok";
+		};
+
+		phy@110f8830 {		/* USB3 port 0 SS phy */
+			status = "ok";
+		};
+
+		usb30@0 {
+			status = "ok";
+		};
+
+		usb30@1 {
+			status = "ok";
+		};
+
+		pcie0: pci@1b500000 {
+			status = "ok";
+		};
+
+		pcie1: pci@1b700000 {
+			status = "ok";
+			force_gen1 = <1>;
+		};
+
+		nand@1ac00000 {
+			status = "ok";
+
+			pinctrl-0 = <&nand_pins>;
+			pinctrl-names = "default";
+
+			cs0 {
+				reg = <0>;
+				compatible = "qcom,nandcs";
+
+				nand-ecc-strength = <4>;
+				nand-bus-width = <8>;
+				nand-ecc-step-size = <512>;
+
+				partitions {
+					compatible = "qcom,smem";
+				};
+			};
+		};
+
+		mdio0: mdio {
+			compatible = "virtual,mdio-gpio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
+			pinctrl-0 = <&mdio0_pins>;
+			pinctrl-names = "default";
+
+			phy0: ethernet-phy@0 {
+				device_type = "ethernet-phy";
+				reg = <0>;
+				qca,ar8327-initvals = <
+					0x00004 0x7600000   /* PAD0_MODE */
+					0x00008 0x1000000   /* PAD5_MODE */
+					0x0000c 0x80        /* PAD6_MODE */
+					0x000e4 0x6a545     /* MAC_POWER_SEL */
+					0x000e0 0xc74164de  /* SGMII_CTRL */
+					0x0007c 0x4e        /* PORT0_STATUS */
+					0x00094 0x4e        /* PORT6_STATUS */
+					>;
+			};
+
+			phy4: ethernet-phy@4 {
+				device_type = "ethernet-phy";
+				reg = <4>;
+			};
+		};
+
+		gmac1: ethernet@37200000 {
+			status = "ok";
+			phy-mode = "rgmii";
+			qcom,id = <1>;
+
+			pinctrl-0 = <&rgmii2_pins>;
+			pinctrl-names = "default";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		gmac2: ethernet@37400000 {
+			status = "ok";
+			phy-mode = "sgmii";
+			qcom,id = <2>;
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
+&adm_dma {
+	status = "ok";
+};
diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-c2600.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
new file mode 100644
index 0000000..a4fd134
--- /dev/null
+++ b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
@@ -0,0 +1,500 @@
+#include "qcom-ipq8064-v1.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "TP-Link Archer C2600";
+	compatible = "tplink,c2600", "qcom,ipq8064";
+
+	memory@0 {
+		reg = <0x42000000 0x1e000000>;
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		rsvd@41200000 {
+			reg = <0x41200000 0x300000>;
+			no-map;
+		};
+	};
+
+	aliases {
+		serial0 = &gsbi4_serial;
+		mdio-gpio0 = &mdio0;
+
+		led-boot = &power;
+		led-failsafe = &general;
+		led-running = &power;
+		led-upgrade = &general;
+	};
+
+	chosen {
+		linux,stdout-path = "serial0:115200n8";
+	};
+
+	soc {
+		pinmux@800000 {
+			button_pins: button_pins {
+				mux {
+					pins = "gpio16", "gpio54", "gpio65";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			i2c4_pins: i2c4_pinmux {
+				mux {
+					pins = "gpio12", "gpio13";
+					function = "gsbi4";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
+
+			led_pins: led_pins {
+				mux {
+					pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio26", "gpio33",
+					       "gpio53", "gpio66";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			spi_pins: spi_pins {
+				mux {
+					pins = "gpio18", "gpio19", "gpio21";
+					function = "gsbi5";
+					bias-pull-down;
+				};
+
+				data {
+					pins = "gpio18", "gpio19";
+					drive-strength = <10>;
+				};
+
+				cs {
+					pins = "gpio20";
+					function = "gpio";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				clk {
+					pins = "gpio21";
+					drive-strength = <12>;
+				};
+			};
+
+			mdio0_pins: mdio0_pins {
+				mux {
+					pins = "gpio0", "gpio1";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+
+			rgmii2_pins: rgmii2_pins {
+				mux {
+					pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
+					       "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
+					function = "rgmii2";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+
+			usb0_pwr_en_pin: usb0_pwr_en_pin {
+				mux {
+					pins = "gpio25";
+					function = "gpio";
+					drive-strength = <10>;
+					bias-pull-up;
+					output-high;
+				};
+			};
+
+			usb1_pwr_en_pin: usb1_pwr_en_pin {
+				mux {
+					pins = "gpio23";
+					function = "gpio";
+					drive-strength = <10>;
+					bias-pull-up;
+					output-high;
+				};
+			};
+		};
+
+		gsbi@16300000 {
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+			status = "ok";
+			serial@16340000 {
+				status = "ok";
+			};
+			/*
+			 * The i2c device on gsbi4 should not be enabled.
+			 * On ipq806x designs gsbi4 i2c is meant for exclusive
+			 * RPM usage. Turning this on in kernel manifests as
+			 * i2c failure for the RPM.
+			 */
+		};
+
+		gsbi5: gsbi@1a200000 {
+			qcom,mode = <GSBI_PROT_SPI>;
+			status = "ok";
+
+			spi5: spi@1a280000 {
+				status = "ok";
+
+				pinctrl-0 = <&spi_pins>;
+				pinctrl-names = "default";
+
+				cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+				flash: m25p80@0 {
+					compatible = "jedec,spi-nor";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+
+					SBL1@0 {
+						label = "SBL1";
+						reg = <0x0 0x20000>;
+						read-only;
+					};
+
+					MIBIB@20000 {
+						label = "MIBIB";
+						reg = <0x20000 0x20000>;
+						read-only;
+					};
+
+					SBL2@40000 {
+						label = "SBL2";
+						reg = <0x40000 0x20000>;
+						read-only;
+					};
+
+					SBL3@60000 {
+						label = "SBL3";
+						reg = <0x60000 0x30000>;
+						read-only;
+					};
+
+					DDRCONFIG@90000 {
+						label = "DDRCONFIG";
+						reg = <0x90000 0x10000>;
+						read-only;
+					};
+
+					SSD@a0000 {
+						label = "SSD";
+						reg = <0xa0000 0x10000>;
+						read-only;
+					};
+
+					TZ@b0000 {
+						label = "TZ";
+						reg = <0xb0000 0x30000>;
+						read-only;
+					};
+
+					RPM@e0000 {
+						label = "RPM";
+						reg = <0xe0000 0x20000>;
+						read-only;
+					};
+
+					fs-uboot@100000 {
+						label = "fs-uboot";
+						reg = <0x100000 0x70000>;
+						read-only;
+					};
+
+					uboot-env@170000 {
+						label = "uboot-env";
+						reg = <0x170000 0x40000>;
+						read-only;
+					};
+
+					radio@1b0000 {
+						label = "radio";
+						reg = <0x1b0000 0x40000>;
+						read-only;
+					};
+
+					os-image@1f0000 {
+						label = "os-image";
+						reg = <0x1f0000 0x200000>;
+					};
+
+					rootfs@3f0000 {
+						label = "rootfs";
+						reg = <0x3f0000 0x1b00000>;
+					};
+
+					defaultmac: default-mac@1ef0000 {
+						label = "default-mac";
+						reg = <0x1ef0000 0x00200>;
+						read-only;
+					};
+
+					pin@1ef0200 {
+						label = "pin";
+						reg = <0x1ef0200 0x00200>;
+						read-only;
+					};
+
+					product-info@1ef0400 {
+						label = "product-info";
+						reg = <0x1ef0400 0x0fc00>;
+						read-only;
+					};
+
+					partition-table@1f00000 {
+						label = "partition-table";
+						reg = <0x1f00000 0x10000>;
+						read-only;
+					};
+
+					soft-version@1f10000 {
+						label = "soft-version";
+						reg = <0x1f10000 0x10000>;
+						read-only;
+					};
+
+					support-list@1f20000 {
+						label = "support-list";
+						reg = <0x1f20000 0x10000>;
+						read-only;
+					};
+
+					profile@1f30000 {
+						label = "profile";
+						reg = <0x1f30000 0x10000>;
+						read-only;
+					};
+
+					default-config@1f40000 {
+						label = "default-config";
+						reg = <0x1f40000 0x10000>;
+						read-only;
+					};
+
+					user-config@1f50000 {
+						label = "user-config";
+						reg = <0x1f50000 0x40000>;
+						read-only;
+					};
+
+					qos-db@1f90000 {
+						label = "qos-db";
+						reg = <0x1f90000 0x40000>;
+						read-only;
+					};
+
+					usb-config@1fd0000 {
+						label = "usb-config";
+						reg = <0x1fd0000 0x10000>;
+						read-only;
+					};
+
+					log@1fe0000 {
+						label = "log";
+						reg = <0x1fe0000 0x20000>;
+						read-only;
+					};
+				};
+			};
+		};
+
+		phy@100f8800 {		/* USB3 port 1 HS phy */
+			status = "ok";
+		};
+
+		phy@100f8830 {		/* USB3 port 1 SS phy */
+			status = "ok";
+		};
+
+		phy@110f8800 {		/* USB3 port 0 HS phy */
+			status = "ok";
+		};
+
+		phy@110f8830 {		/* USB3 port 0 SS phy */
+			status = "ok";
+		};
+
+		usb30@0 {
+			status = "ok";
+
+			pinctrl-0 = <&usb0_pwr_en_pin>;
+			pinctrl-names = "default";
+		};
+
+		usb30@1 {
+			status = "ok";
+
+			pinctrl-0 = <&usb1_pwr_en_pin>;
+			pinctrl-names = "default";
+		};
+
+		pcie0: pci@1b500000 {
+			status = "ok";
+		};
+
+		pcie1: pci@1b700000 {
+			status = "ok";
+			force_gen1 = <1>;
+		};
+
+		mdio0: mdio {
+			compatible = "virtual,mdio-gpio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+			pinctrl-0 = <&mdio0_pins>;
+			pinctrl-names = "default";
+
+			phy0: ethernet-phy@0 {
+				device_type = "ethernet-phy";
+				reg = <0>;
+				qca,ar8327-initvals = <
+					0x00004 0x7600000   /* PAD0_MODE */
+					0x00008 0x1000000   /* PAD5_MODE */
+					0x0000c 0x80        /* PAD6_MODE */
+					0x000e4 0x6a545     /* MAC_POWER_SEL */
+					0x000e0 0xc74164de  /* SGMII_CTRL */
+					0x0007c 0x4e        /* PORT0_STATUS */
+					0x00094 0x4e        /* PORT6_STATUS */
+					>;
+			};
+
+			phy4: ethernet-phy@4 {
+				device_type = "ethernet-phy";
+				reg = <4>;
+			};
+		};
+
+		gmac1: ethernet@37200000 {
+			status = "ok";
+			phy-mode = "rgmii";
+			qcom,id = <1>;
+
+			pinctrl-0 = <&rgmii2_pins>;
+			pinctrl-names = "default";
+
+			mtd-mac-address = <&defaultmac 0x8>;
+			mtd-mac-address-increment = <1>;
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		gmac2: ethernet@37400000 {
+			status = "ok";
+			phy-mode = "sgmii";
+			qcom,id = <2>;
+
+			mtd-mac-address = <&defaultmac 0x8>;
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		rpm@108000 {
+			pinctrl-0 = <&i2c4_pins>;
+			pinctrl-names = "default";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		wifi {
+			label = "wifi";
+			gpios = <&qcom_pinmux 49 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+
+		ledswitch {
+			label = "ledswitch";
+			gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_LIGHTS_TOGGLE>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+		lan {
+			label = "c2600:white:lan";
+			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb4 {
+			label = "c2600:white:usb_4";
+			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb2 {
+			label = "c2600:white:usb_2";
+			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		wps {
+			label = "c2600:white:wps";
+			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		wan_amber {
+			label = "c2600:amber:wan";
+			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
+		};
+
+		wan_white {
+			label = "c2600:white:wan";
+			gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>;
+		};
+
+		power: power {
+			label = "c2600:white:power";
+			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+
+		general: general {
+			label = "c2600:white:general";
+			gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&adm_dma {
+	status = "ok";
+};
diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-d7800.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
new file mode 100644
index 0000000..b7c49cc
--- /dev/null
+++ b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
@@ -0,0 +1,419 @@
+#include "qcom-ipq8064-v1.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Netgear Nighthawk X4 D7800";
+	compatible = "netgear,d7800", "qcom,ipq8064";
+
+	memory@0 {
+		reg = <0x42000000 0xe000000>;
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		rsvd@41200000 {
+			reg = <0x41200000 0x300000>;
+			no-map;
+		};
+	};
+
+	aliases {
+		serial0 = &gsbi4_serial;
+		mdio-gpio0 = &mdio0;
+
+		led-boot = &power_white;
+		led-failsafe = &power_amber;
+		led-running = &power_white;
+		led-upgrade = &power_amber;
+	};
+
+	chosen {
+		bootargs = "rootfstype=squashfs noinitrd";
+		linux,stdout-path = "serial0:115200n8";
+	};
+
+	soc {
+		pinmux@800000 {
+			button_pins: button_pins {
+				mux {
+					pins = "gpio6", "gpio54", "gpio65";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			i2c4_pins: i2c4_pinmux {
+				mux {
+					pins = "gpio12", "gpio13";
+					function = "gsbi4";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
+
+			led_pins: led_pins {
+				mux {
+					pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
+						"gpio24","gpio26", "gpio53", "gpio64";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			mdio0_pins: mdio0_pins {
+				mux {
+					pins = "gpio0", "gpio1";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+
+			nand_pins: nand_pins {
+				mux {
+					pins = "gpio34", "gpio35", "gpio36",
+					       "gpio37", "gpio38", "gpio39",
+					       "gpio40", "gpio41", "gpio42",
+					       "gpio43", "gpio44", "gpio45",
+					       "gpio46", "gpio47";
+					function = "nand";
+					drive-strength = <10>;
+					bias-disable;
+				};
+				pullups {
+					pins = "gpio39";
+					bias-pull-up;
+				};
+				hold {
+					pins = "gpio40", "gpio41", "gpio42",
+					       "gpio43", "gpio44", "gpio45",
+					       "gpio46", "gpio47";
+					bias-bus-hold;
+				};
+			};
+
+			rgmii2_pins: rgmii2_pins {
+				mux {
+					pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
+					       "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
+					function = "rgmii2";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+
+			usb0_pwr_en_pins: usb0_pwr_en_pins {
+				mux {
+					pins = "gpio15";
+					function = "gpio";
+					drive-strength = <12>;
+					bias-pull-down;
+					output-high;
+				};
+			};
+
+			usb1_pwr_en_pins: usb1_pwr_en_pins {
+				mux {
+					pins = "gpio16", "gpio68";
+					function = "gpio";
+					drive-strength = <12>;
+					bias-pull-down;
+					output-high;
+				};
+			};
+		};
+
+		gsbi@16300000 {
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+			status = "ok";
+			serial@16340000 {
+				status = "ok";
+			};
+			/*
+			 * The i2c device on gsbi4 should not be enabled.
+			 * On ipq806x designs gsbi4 i2c is meant for exclusive
+			 * RPM usage. Turning this on in kernel manifests as
+			 * i2c failure for the RPM.
+			 */
+		};
+
+		sata-phy@1b400000 {
+			status = "ok";
+		};
+
+		sata@29000000 {
+			status = "ok";
+		};
+
+		phy@100f8800 {		/* USB3 port 1 HS phy */
+			status = "ok";
+		};
+
+		phy@100f8830 {		/* USB3 port 1 SS phy */
+			status = "ok";
+		};
+
+		phy@110f8800 {		/* USB3 port 0 HS phy */
+			status = "ok";
+		};
+
+		phy@110f8830 {		/* USB3 port 0 SS phy */
+			status = "ok";
+		};
+
+		usb30@0 {
+			status = "ok";
+
+			pinctrl-0 = <&usb0_pwr_en_pins>;
+			pinctrl-names = "default";
+		};
+
+		usb30@1 {
+			status = "ok";
+
+			pinctrl-0 = <&usb1_pwr_en_pins>;
+			pinctrl-names = "default";
+		};
+
+		pcie0: pci@1b500000 {
+			status = "ok";
+			reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
+			pinctrl-0 = <&pcie0_pins>;
+			pinctrl-names = "default";
+		};
+
+		pcie1: pci@1b700000 {
+			status = "ok";
+			reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
+			pinctrl-0 = <&pcie1_pins>;
+			pinctrl-names = "default";
+			force_gen1 = <1>;
+		};
+
+		nand@1ac00000 {
+			status = "ok";
+
+			pinctrl-0 = <&nand_pins>;
+			pinctrl-names = "default";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			cs0 {
+				reg = <0>;
+				compatible = "qcom,nandcs";
+
+				nand-ecc-strength = <4>;
+				nand-bus-width = <8>;
+				nand-ecc-step-size = <512>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					qcadata@0 {
+						label = "qcadata";
+						reg = <0x0000000 0x0c80000>;
+						read-only;
+					};
+
+					APPSBL@c80000 {
+						label = "APPSBL";
+						reg = <0x0c80000 0x0500000>;
+						read-only;
+					};
+
+					APPSBLENV@1180000 {
+						label = "APPSBLENV";
+						reg = <0x1180000 0x0080000>;
+						read-only;
+					};
+
+					art: art@1200000 {
+						label = "art";
+						reg = <0x1200000 0x0140000>;
+						read-only;
+					};
+
+					artbak: art@1340000 {
+						label = "artbak";
+						reg = <0x1340000 0x0140000>;
+						read-only;
+					};
+
+					kernel@1480000 {
+						label = "kernel";
+						reg = <0x1480000 0x0200000>;
+					};
+
+					ubi@1680000 {
+						label = "ubi";
+						reg = <0x1680000 0x1E00000>;
+					};
+
+					netgear@3480000 {
+						label = "netgear";
+						reg = <0x3480000 0x4480000>;
+						read-only;
+					};
+
+					reserve@7900000 {
+						label = "reserve";
+						reg = <0x7900000 0x0700000>;
+						read-only;
+					};
+
+					firmware@1480000 {
+						label = "firmware";
+						reg = <0x1480000 0x2000000>;
+					};
+				};
+			};
+		};
+
+		mdio0: mdio {
+			compatible = "virtual,mdio-gpio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+			pinctrl-0 = <&mdio0_pins>;
+			pinctrl-names = "default";
+
+			phy0: ethernet-phy@0 {
+				device_type = "ethernet-phy";
+				reg = <0>;
+				qca,ar8327-initvals = <
+					0x00004 0x7600000   /* PAD0_MODE */
+					0x00008 0x1000000   /* PAD5_MODE */
+					0x0000c 0x80        /* PAD6_MODE */
+					0x000e4 0x6a545     /* MAC_POWER_SEL */
+					0x000e0 0xc74164de  /* SGMII_CTRL */
+					0x0007c 0x4e        /* PORT0_STATUS */
+					0x00094 0x4e        /* PORT6_STATUS */
+					>;
+			};
+
+			phy4: ethernet-phy@4 {
+				device_type = "ethernet-phy";
+				reg = <4>;
+			};
+		};
+
+		gmac1: ethernet@37200000 {
+			status = "ok";
+			phy-mode = "rgmii";
+			phy-handle = <&phy4>;
+			qcom,id = <1>;
+
+			pinctrl-0 = <&rgmii2_pins>;
+			pinctrl-names = "default";
+
+			mtd-mac-address = <&art 6>;
+		};
+
+		gmac2: ethernet@37400000 {
+			status = "ok";
+			phy-mode = "sgmii";
+			qcom,id = <2>;
+
+			mtd-mac-address = <&art 0>;
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		rpm@108000 {
+			pinctrl-0 = <&i2c4_pins>;
+			pinctrl-names = "default";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		wifi {
+			label = "wifi";
+			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+		usb1 {
+			label = "d7800:white:usb1";
+			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb2 {
+			label = "d7800:white:usb2";
+			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_amber: power_amber {
+			label = "d7800:amber:power";
+			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		wan_white {
+			label = "d7800:white:wan";
+			gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		wan_amber {
+			label = "d7800:amber:wan";
+			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		wps {
+			label = "d7800:white:wps";
+			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
+		};
+
+		esata {
+			label = "d7800:white:esata";
+			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_white: power_white {
+			label = "d7800:white:power";
+			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+
+		wifi {
+			label = "d7800:white:wifi";
+			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&adm_dma {
+	status = "ok";
+};
diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-db149.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-db149.dts
new file mode 100644
index 0000000..4c56866
--- /dev/null
+++ b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-db149.dts
@@ -0,0 +1,236 @@
+#include "qcom-ipq8064-v1.0.dtsi"
+
+/ {
+	model = "Qualcomm IPQ8064/DB149";
+	compatible = "qcom,ipq8064-db149", "qcom,ipq8064";
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		rsvd@41200000 {
+			reg = <0x41200000 0x300000>;
+			no-map;
+		};
+	};
+
+	alias {
+		serial0 = &uart2;
+		mdio-gpio0 = &mdio0;
+	};
+
+	chosen {
+		linux,stdout-path = "serial0:115200n8";
+	};
+
+	soc {
+		pinmux@800000 {
+			i2c4_pins: i2c4_pinmux {
+				pins = "gpio12", "gpio13";
+				function = "gsbi4";
+				bias-disable;
+			};
+
+			spi_pins: spi_pins {
+				mux {
+					pins = "gpio18", "gpio19", "gpio21";
+					function = "gsbi5";
+					drive-strength = <10>;
+					bias-none;
+				};
+			};
+
+			mdio0_pins: mdio0_pins {
+				mux {
+					pins = "gpio0", "gpio1";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+
+			rgmii0_pins: rgmii0_pins {
+				mux {
+					pins = "gpio2", "gpio66";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+		};
+
+		gsbi2: gsbi@12480000 {
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+			status = "ok";
+			uart2: serial@12490000 {
+				status = "ok";
+			};
+		};
+
+		gsbi5: gsbi@1a200000 {
+			qcom,mode = <GSBI_PROT_SPI>;
+			status = "ok";
+
+			spi4: spi@1a280000 {
+				status = "ok";
+				spi-max-frequency = <50000000>;
+
+				pinctrl-0 = <&spi_pins>;
+				pinctrl-names = "default";
+
+				cs-gpios = <&qcom_pinmux 20 0>;
+
+				flash: m25p80@0 {
+					compatible = "s25fl256s1";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+					m25p,fast-read;
+
+					partition@0 {
+						label = "lowlevel_init";
+						reg = <0x0 0x1b0000>;
+					};
+
+					partition@1 {
+						label = "u-boot";
+						reg = <0x1b0000 0x80000>;
+					};
+
+					partition@2 {
+						label = "u-boot-env";
+						reg = <0x230000 0x40000>;
+					};
+
+					partition@3 {
+						label = "caldata";
+						reg = <0x270000 0x40000>;
+					};
+
+					partition@4 {
+						label = "firmware";
+						reg = <0x2b0000 0x1d50000>;
+					};
+				};
+			};
+		};
+
+		sata-phy@1b400000 {
+			status = "ok";
+		};
+
+		sata@29000000 {
+			status = "ok";
+		};
+
+		phy@100f8800 {		/* USB3 port 1 HS phy */
+			status = "ok";
+		};
+
+		phy@100f8830 {		/* USB3 port 1 SS phy */
+			status = "ok";
+		};
+
+		phy@110f8800 {		/* USB3 port 0 HS phy */
+			status = "ok";
+		};
+
+		phy@110f8830 {		/* USB3 port 0 SS phy */
+			status = "ok";
+		};
+
+		usb30@0 {
+			status = "ok";
+		};
+
+		usb30@1 {
+			status = "ok";
+		};
+
+		pcie0: pci@1b500000 {
+			status = "ok";
+		};
+
+		pcie1: pci@1b700000 {
+			status = "ok";
+		};
+
+		pcie2: pci@1b900000 {
+			status = "ok";
+		};
+
+		mdio0: mdio {
+			compatible = "virtual,mdio-gpio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
+
+			pinctrl-0 = <&mdio0_pins>;
+			pinctrl-names = "default";
+
+			phy0: ethernet-phy@0 {
+				device_type = "ethernet-phy";
+				reg = <0>;
+				qca,ar8327-initvals = <
+					0x00004 0x7600000   /* PAD0_MODE */
+					0x00008 0x1000000   /* PAD5_MODE */
+					0x0000c 0x80        /* PAD6_MODE */
+					0x000e4 0x6a545     /* MAC_POWER_SEL */
+					0x000e0 0xc74164de  /* SGMII_CTRL */
+					0x0007c 0x4e        /* PORT0_STATUS */
+					0x00094 0x4e        /* PORT6_STATUS */
+				>;
+			};
+
+			phy4: ethernet-phy@4 {
+				device_type = "ethernet-phy";
+				reg = <4>;
+			};
+
+			phy6: ethernet-phy@6 {
+				device_type = "ethernet-phy";
+				reg = <6>;
+			};
+
+			phy7: ethernet-phy@7 {
+				device_type = "ethernet-phy";
+				reg = <7>;
+			};
+		};
+
+		gmac0: ethernet@37000000 {
+			status = "ok";
+			phy-mode = "rgmii";
+			qcom,id = <0>;
+			phy-handle = <&phy4>;
+
+			pinctrl-0 = <&rgmii0_pins>;
+			pinctrl-names = "default";
+		};
+
+		gmac1: ethernet@37200000 {
+			status = "ok";
+			phy-mode = "sgmii";
+			qcom,id = <1>;
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		gmac2: ethernet@37400000 {
+			status = "ok";
+			phy-mode = "sgmii";
+			qcom,id = <2>;
+			phy-handle = <&phy6>;
+		};
+
+		gmac3: ethernet@37600000 {
+			status = "ok";
+			phy-mode = "sgmii";
+			qcom,id = <3>;
+			phy-handle = <&phy7>;
+		};
+	};
+};
diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
new file mode 100644
index 0000000..a8628ff
--- /dev/null
+++ b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
@@ -0,0 +1,406 @@
+#include "qcom-ipq8064-v1.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Linksys EA8500 WiFi Router";
+	compatible = "linksys,ea8500", "qcom,ipq8064";
+
+	memory@0 {
+		reg = <0x42000000 0x1e000000>;
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		rsvd@41200000 {
+			reg = <0x41200000 0x300000>;
+			no-map;
+		};
+	};
+
+	aliases {
+		serial0 = &gsbi4_serial;
+		mdio-gpio0 = &mdio0;
+
+		led-boot = &power;
+		led-failsafe = &power;
+		led-running = &power;
+		led-upgrade = &power;
+	};
+
+	chosen {
+		bootargs = "console=ttyMSM0,115200n8"; 
+		linux,stdout-path = "serial0:115200n8";
+		append-rootblock = "ubi.mtd=";  /* append to bootargs adding the root deviceblock nbr from bootloader */
+	};
+
+	soc {
+		pinmux@800000 {
+			button_pins: button_pins {
+				mux {
+					pins = "gpio65", "gpio67", "gpio68";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			i2c4_pins: i2c4_pinmux {
+				mux {
+					pins = "gpio12", "gpio13";
+					function = "gsbi4";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
+
+			led_pins: led_pins {
+				mux {
+					pins = "gpio6", "gpio53", "gpio54";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			mdio0_pins: mdio0_pins {
+				mux {
+					pins = "gpio0", "gpio1";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+
+			nand_pins: nand_pins {
+				mux {
+					pins = "gpio34", "gpio35", "gpio36",
+					       "gpio37", "gpio38", "gpio39",
+					       "gpio40", "gpio41", "gpio42",
+					       "gpio43", "gpio44", "gpio45",
+					       "gpio46", "gpio47";
+					function = "nand";
+					drive-strength = <10>;
+					bias-disable;
+				};
+				pullups {
+					pins = "gpio39";
+					bias-pull-up;
+				};
+				hold {
+					pins = "gpio40", "gpio41", "gpio42",
+					       "gpio43", "gpio44", "gpio45",
+					       "gpio46", "gpio47";
+					bias-bus-hold;
+				};
+			};
+
+			rgmii2_pins: rgmii2_pins {
+				mux {
+					pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
+					       "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
+					function = "rgmii2";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+		};
+
+		gsbi@16300000 {
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+			status = "ok";
+			serial@16340000 {
+				status = "ok";
+			};
+			/*
+			 * The i2c device on gsbi4 should not be enabled.
+			 * On ipq806x designs gsbi4 i2c is meant for exclusive
+			 * RPM usage. Turning this on in kernel manifests as
+			 * i2c failure for the RPM.
+			 */
+		};
+
+		sata-phy@1b400000 {
+			status = "ok";
+		};
+
+		sata@29000000 {
+			status = "ok";
+		};
+
+		phy@100f8800 {		/* USB3 port 1 HS phy */
+			status = "ok";
+		};
+
+		phy@100f8830 {		/* USB3 port 1 SS phy */
+			status = "ok";
+		};
+
+		phy@110f8800 {		/* USB3 port 0 HS phy */
+			status = "ok";
+		};
+
+		phy@110f8830 {		/* USB3 port 0 SS phy */
+			status = "ok";
+		};
+
+		usb30@0 {
+			status = "ok";
+		};
+
+		usb30@1 {
+			status = "ok";
+		};
+
+		pcie0: pci@1b500000 {
+			status = "ok";
+			force_gen1 = <1>;
+		};
+
+		pcie1: pci@1b700000 {
+			status = "ok";
+		};
+
+		pcie2: pci@1b900000 {
+			status = "ok";
+		};
+
+		nand@1ac00000 {
+			status = "ok";
+
+			pinctrl-0 = <&nand_pins>;
+			pinctrl-names = "default";
+
+			cs0 {
+				reg = <0>;
+				compatible = "qcom,nandcs";
+
+				nand-ecc-strength = <4>;
+				nand-bus-width = <8>;
+				nand-ecc-step-size = <512>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					SBL1@0 {
+						label = "SBL1";
+						reg = <0x0000000 0x0040000>;
+						read-only;
+					};
+
+					MIBIB@40000 {
+						label = "MIBIB";
+						reg = <0x0040000 0x0140000>;
+						read-only;
+					};
+
+					SBL2@180000 {
+						label = "SBL2";
+						reg = <0x0180000 0x0140000>;
+						read-only;
+					};
+
+					SBL3@2c0000 {
+						label = "SBL3";
+						reg = <0x02c0000 0x0280000>;
+						read-only;
+					};
+
+					DDRCONFIG@540000 {
+						label = "DDRCONFIG";
+						reg = <0x0540000 0x0120000>;
+						read-only;
+					};
+
+					SSD@660000 {
+						label = "SSD";
+						reg = <0x0660000 0x0120000>;
+						read-only;
+					};
+
+					TZ@780000 {
+						label = "TZ";
+						reg = <0x0780000 0x0280000>;
+						read-only;
+					};
+
+					RPM@a00000 {
+						label = "RPM";
+						reg = <0x0a00000 0x0280000>;
+						read-only;
+					};
+
+					art: art@c80000 {
+						label = "art";
+						reg = <0x0c80000 0x0140000>;
+						read-only;
+					};
+
+					APPSBL@dc0000 {
+						label = "APPSBL";
+						reg = <0x0dc0000 0x0100000>;
+						read-only;
+					};
+
+					u_env@ec0000 {
+						label = "u_env";
+						reg = <0x0ec0000 0x0040000>;
+					};
+
+					s_env@f00000 {
+						label = "s_env";
+						reg = <0x0f00000 0x0040000>;
+					};
+
+					devinfo@f40000 {
+						label = "devinfo";
+						reg = <0x0f40000 0x0040000>;
+					};
+
+					linux@f80000 { 
+						label = "kernel1";
+						reg = <0x0f80000 0x2800000>;  /* 3 MB spill to rootfs*/
+					};
+
+					rootfs@1280000 {
+						label = "rootfs1";
+						reg = <0x1280000 0x2500000>;
+					};
+
+					linux2@3780000 {
+						label = "kernel2";
+						reg = <0x3780000 0x2800000>;
+					};
+
+					rootfs2@3a80000 {
+						label = "rootfs2";
+						reg = <0x3a80000 0x2500000>;
+					};
+
+					syscfg@5f80000 {
+						label = "syscfg";
+						reg = <0x5f80000 0x2080000>;
+					};
+				};
+			};
+		};
+
+		mdio0: mdio {
+			compatible = "virtual,mdio-gpio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+			pinctrl-0 = <&mdio0_pins>;
+			pinctrl-names = "default";
+
+			phy0: ethernet-phy@0 {
+				device_type = "ethernet-phy";
+				reg = <0>;
+				qca,ar8327-initvals = <
+					0x00004 0x7600000   /* PAD0_MODE */
+					0x00008 0x1000000   /* PAD5_MODE */
+					0x0000c 0x80        /* PAD6_MODE */
+					0x000e4 0x6a545     /* MAC_POWER_SEL */
+					0x000e0 0xc74164de  /* SGMII_CTRL */
+					0x0007c 0x4e        /* PORT0_STATUS */
+					0x00094 0x4e        /* PORT6_STATUS */
+					>;
+			};
+
+			phy4: ethernet-phy@4 {
+				device_type = "ethernet-phy";
+				reg = <4>;
+			};
+		};
+
+		gmac1: ethernet@37200000 {
+			status = "ok";
+			phy-mode = "rgmii";
+			qcom,id = <1>;
+			qcom,phy_mdio_addr = <4>;
+			qcom,poll_required = <1>;
+			qcom,rgmii_delay = <0>;
+			qcom,emulation = <0>;
+			pinctrl-0 = <&rgmii2_pins>;
+			pinctrl-names = "default";
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+		//lan
+		gmac2: ethernet@37400000 {
+			status = "ok";
+			phy-mode = "sgmii";
+			qcom,id = <2>;
+			qcom,phy_mdio_addr = <0>;	/* none */
+			qcom,poll_required = <0>;	/* no polling */
+			qcom,rgmii_delay = <0>;
+			qcom,emulation = <0>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		rpm@108000 {
+			pinctrl-0 = <&i2c4_pins>;
+			pinctrl-names = "default";
+		};
+
+		adm_dma: dma@18300000 {
+			status = "ok";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		wifi {
+			label = "wifi";
+			gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART >;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+		wps {
+			label = "ea8500:green:wps";
+			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+		};
+
+		power: power {
+			label = "ea8500:white:power";
+			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		wifi {
+			label = "ea8500:green:wifi";
+			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-r7500.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
new file mode 100644
index 0000000..3445a79
--- /dev/null
+++ b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
@@ -0,0 +1,394 @@
+#include "qcom-ipq8064-v1.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+	model = "Netgear Nighthawk X4 R7500";
+	compatible = "netgear,r7500", "qcom,ipq8064";
+
+	memory@0 {
+		reg = <0x42000000 0xe000000>;
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		rsvd@41200000 {
+			reg = <0x41200000 0x300000>;
+			no-map;
+		};
+	};
+
+	aliases {
+		serial0 = &gsbi4_serial;
+		mdio-gpio0 = &mdio0;
+
+		led-boot = &power_white;
+		led-failsafe = &power_amber;
+		led-running = &power_white;
+		led-upgrade = &power_amber;
+	};
+
+	chosen {
+		bootargs = "rootfstype=squashfs noinitrd";
+		linux,stdout-path = "serial0:115200n8";
+	};
+
+	soc {
+		pinmux@800000 {
+			button_pins: button_pins {
+				mux {
+					pins = "gpio6", "gpio54", "gpio65";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			i2c4_pins: i2c4_pinmux {
+				mux {
+					pins = "gpio12", "gpio13";
+					function = "gsbi4";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
+
+			led_pins: led_pins {
+				mux {
+					pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
+						"gpio24","gpio26", "gpio53", "gpio64";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			mdio0_pins: mdio0_pins {
+				mux {
+					pins = "gpio0", "gpio1";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+
+			nand_pins: nand_pins {
+				mux {
+					pins = "gpio34", "gpio35", "gpio36",
+					       "gpio37", "gpio38", "gpio39",
+					       "gpio40", "gpio41", "gpio42",
+					       "gpio43", "gpio44", "gpio45",
+					       "gpio46", "gpio47";
+					function = "nand";
+					drive-strength = <10>;
+					bias-disable;
+				};
+				pullups {
+					pins = "gpio39";
+					bias-pull-up;
+				};
+				hold {
+					pins = "gpio40", "gpio41", "gpio42",
+					       "gpio43", "gpio44", "gpio45",
+					       "gpio46", "gpio47";
+					bias-bus-hold;
+				};
+			};
+
+			rgmii2_pins: rgmii2_pins {
+				mux {
+					pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
+					       "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
+					function = "rgmii2";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+		};
+
+		gsbi@16300000 {
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+			status = "ok";
+			serial@16340000 {
+				status = "ok";
+			};
+			/*
+			 * The i2c device on gsbi4 should not be enabled.
+			 * On ipq806x designs gsbi4 i2c is meant for exclusive
+			 * RPM usage. Turning this on in kernel manifests as
+			 * i2c failure for the RPM.
+			 */
+		};
+
+		sata-phy@1b400000 {
+			status = "ok";
+		};
+
+		sata@29000000 {
+			status = "ok";
+		};
+
+		phy@100f8800 {		/* USB3 port 1 HS phy */
+			clocks = <&gcc USB30_0_UTMI_CLK>;
+			status = "ok";
+		};
+
+		phy@100f8830 {		/* USB3 port 1 SS phy */
+			clocks = <&gcc USB30_0_MASTER_CLK>;
+			status = "ok";
+		};
+
+		phy@110f8800 {		/* USB3 port 0 HS phy */
+			clocks = <&gcc USB30_1_UTMI_CLK>;
+			status = "ok";
+		};
+
+		phy@110f8830 {		/* USB3 port 0 SS phy */
+			clocks = <&gcc USB30_1_MASTER_CLK>;
+			status = "ok";
+		};
+
+		usb30@0 {
+			clocks = <&gcc USB30_1_MASTER_CLK>;
+			status = "ok";
+		};
+
+		usb30@1 {
+			clocks = <&gcc USB30_0_MASTER_CLK>;
+			status = "ok";
+		};
+
+		pcie0: pci@1b500000 {
+			status = "ok";
+		};
+
+		pcie1: pci@1b700000 {
+			status = "ok";
+			force_gen1 = <1>;
+		};
+
+		nand@1ac00000 {
+			status = "ok";
+
+			pinctrl-0 = <&nand_pins>;
+			pinctrl-names = "default";
+
+			cs0 {
+				reg = <0>;
+				compatible = "qcom,nandcs";
+
+				nand-ecc-strength = <4>;
+				nand-bus-width = <8>;
+				nand-ecc-step-size = <512>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					qcadata@0 {
+						label = "qcadata";
+						reg = <0x0000000 0x0c80000>;
+						read-only;
+					};
+
+					APPSBL@c80000 {
+						label = "APPSBL";
+						reg = <0x0c80000 0x0500000>;
+						read-only;
+					};
+
+					APPSBLENV@1180000 {
+						label = "APPSBLENV";
+						reg = <0x1180000 0x0080000>;
+						read-only;
+					};
+
+					art: art@1200000 {
+						label = "art";
+						reg = <0x1200000 0x0140000>;
+						read-only;
+					};
+
+					kernel@1340000 {
+						label = "kernel";
+						reg = <0x1340000 0x0200000>;
+					};
+
+					ubi@1540000 {
+						label = "ubi";
+						reg = <0x1540000 0x1800000>;
+					};
+
+					netgear@2d40000 {
+						label = "netgear";
+						reg = <0x2d40000 0x0c00000>;
+						read-only;
+					};
+
+					reserve@3940000 {
+						label = "reserve";
+						reg = <0x3940000 0x46c0000>;
+						read-only;
+					};
+
+					firmware@1340000 {
+						label = "firmware";
+						reg = <0x1340000 0x1a00000>;
+					};
+				};
+			};
+		};
+
+		mdio0: mdio {
+			compatible = "virtual,mdio-gpio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+			pinctrl-0 = <&mdio0_pins>;
+			pinctrl-names = "default";
+
+			phy0: ethernet-phy@0 {
+				device_type = "ethernet-phy";
+				reg = <0>;
+				qca,ar8327-initvals = <
+					0x00004 0x7600000   /* PAD0_MODE */
+					0x00008 0x1000000   /* PAD5_MODE */
+					0x0000c 0x80        /* PAD6_MODE */
+					0x000e4 0x6a545     /* MAC_POWER_SEL */
+					0x000e0 0xc74164de  /* SGMII_CTRL */
+					0x0007c 0x4e        /* PORT0_STATUS */
+					0x00094 0x4e        /* PORT6_STATUS */
+					>;
+			};
+
+			phy4: ethernet-phy@4 {
+				device_type = "ethernet-phy";
+				reg = <4>;
+			};
+		};
+
+		gmac1: ethernet@37200000 {
+			status = "ok";
+			phy-mode = "rgmii";
+			qcom,id = <1>;
+
+			pinctrl-0 = <&rgmii2_pins>;
+			pinctrl-names = "default";
+
+			mtd-mac-address = <&art 6>;
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		gmac2: ethernet@37400000 {
+			status = "ok";
+			phy-mode = "sgmii";
+			qcom,id = <2>;
+
+			mtd-mac-address = <&art 0>;
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		rpm@108000 {
+			pinctrl-0 = <&i2c4_pins>;
+			pinctrl-names = "default";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		wifi {
+			label = "wifi";
+			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+		usb1 {
+			label = "r7500:white:usb1";
+			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb2 {
+			label = "r7500:white:usb2";
+			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_amber: power_amber {
+			label = "r7500:amber:power";
+			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		wan_white {
+			label = "r7500:white:wan";
+			gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		wan_amber {
+			label = "r7500:amber:wan";
+			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		wps {
+			label = "r7500:white:wps";
+			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
+		};
+
+		esata {
+			label = "r7500:white:esata";
+			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_white: power_white {
+			label = "r7500:white:power";
+			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+
+		wifi {
+			label = "r7500:white:wifi";
+			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&tcsr {
+	qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
+	compatible = "qcom,tcsr";
+};
+
+&adm_dma {
+	status = "ok";
+};
diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
new file mode 100644
index 0000000..c4b0c4b
--- /dev/null
+++ b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
@@ -0,0 +1,425 @@
+#include "qcom-ipq8064-v1.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Netgear Nighthawk X4 R7500v2";
+	compatible = "netgear,r7500v2", "qcom,ipq8064";
+
+	memory@0 {
+		reg = <0x42000000 0x1e000000>;
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		rsvd@41200000 {
+			reg = <0x41200000 0x300000>;
+			no-map;
+		};
+
+		rsvd@5fe00000 {
+			reg = <0x5fe00000 0x200000>;
+			reusable;
+		};
+	};
+
+	aliases {
+		serial0 = &gsbi4_serial;
+		mdio-gpio0 = &mdio0;
+
+		led-boot = &power;
+		led-failsafe = &power;
+		led-running = &power;
+		led-upgrade = &power;
+	};
+
+	chosen {
+		bootargs = "rootfstype=squashfs noinitrd";
+		linux,stdout-path = "serial0:115200n8";
+	};
+
+	soc {
+		pinmux@800000 {
+			button_pins: button_pins {
+				mux {
+					pins = "gpio6", "gpio54", "gpio65";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			i2c4_pins: i2c4_pinmux {
+				mux {
+					pins = "gpio12", "gpio13";
+					function = "gsbi4";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
+
+			led_pins: led_pins {
+				mux {
+					pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
+						"gpio24","gpio26", "gpio53", "gpio64";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			mdio0_pins: mdio0_pins {
+				mux {
+					pins = "gpio0", "gpio1";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+
+			nand_pins: nand_pins {
+				mux {
+					pins = "gpio34", "gpio35", "gpio36",
+					       "gpio37", "gpio38", "gpio39",
+					       "gpio40", "gpio41", "gpio42",
+					       "gpio43", "gpio44", "gpio45",
+					       "gpio46", "gpio47";
+					function = "nand";
+					drive-strength = <10>;
+					bias-disable;
+				};
+				pullups {
+					pins = "gpio39";
+					bias-pull-up;
+				};
+				hold {
+					pins = "gpio40", "gpio41", "gpio42",
+					       "gpio43", "gpio44", "gpio45",
+					       "gpio46", "gpio47";
+					bias-bus-hold;
+				};
+			};
+
+			rgmii2_pins: rgmii2_pins {
+				mux {
+					pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
+					       "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
+					function = "rgmii2";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+
+			usb0_pwr_en_pins: usb0_pwr_en_pins {
+				mux {
+					pins = "gpio15";
+					function = "gpio";
+					drive-strength = <12>;
+					bias-pull-down;
+					output-high;
+				};
+			};
+
+			usb1_pwr_en_pins: usb1_pwr_en_pins {
+				mux {
+					pins = "gpio16", "gpio68";
+					function = "gpio";
+					drive-strength = <12>;
+					bias-pull-down;
+					output-high;
+				};
+			};
+		};
+
+		gsbi@16300000 {
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+			status = "ok";
+			serial@16340000 {
+				status = "ok";
+			};
+			/*
+			 * The i2c device on gsbi4 should not be enabled.
+			 * On ipq806x designs gsbi4 i2c is meant for exclusive
+			 * RPM usage. Turning this on in kernel manifests as
+			 * i2c failure for the RPM.
+			 */
+		};
+
+		sata-phy@1b400000 {
+			status = "ok";
+		};
+
+		sata@29000000 {
+			status = "ok";
+		};
+
+		phy@100f8800 {		/* USB3 port 1 HS phy */
+			status = "ok";
+		};
+
+		phy@100f8830 {		/* USB3 port 1 SS phy */
+			status = "ok";
+		};
+
+		phy@110f8800 {		/* USB3 port 0 HS phy */
+			status = "ok";
+		};
+
+		phy@110f8830 {		/* USB3 port 0 SS phy */
+			status = "ok";
+		};
+
+		usb30@0 {
+			status = "ok";
+
+			pinctrl-0 = <&usb0_pwr_en_pins>;
+			pinctrl-names = "default";
+		};
+
+		usb30@1 {
+			status = "ok";
+
+			pinctrl-0 = <&usb1_pwr_en_pins>;
+			pinctrl-names = "default";
+		};
+
+		pcie0: pci@1b500000 {
+			status = "ok";
+			reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
+			pinctrl-0 = <&pcie0_pins>;
+			pinctrl-names = "default";
+		};
+
+		pcie1: pci@1b700000 {
+			status = "ok";
+			reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
+			pinctrl-0 = <&pcie1_pins>;
+			pinctrl-names = "default";
+			force_gen1 = <1>;
+		};
+
+		nand@1ac00000 {
+			status = "ok";
+
+			pinctrl-0 = <&nand_pins>;
+			pinctrl-names = "default";
+
+			cs0 {
+				reg = <0>;
+				compatible = "qcom,nandcs";
+
+				nand-ecc-strength = <4>;
+				nand-bus-width = <8>;
+				nand-ecc-step-size = <512>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					qcadata@0 {
+						label = "qcadata";
+						reg = <0x0000000 0x0c80000>;
+						read-only;
+					};
+
+					APPSBL@c80000 {
+						label = "APPSBL";
+						reg = <0x0c80000 0x0500000>;
+						read-only;
+					};
+
+					APPSBLENV@1180000 {
+						label = "APPSBLENV";
+						reg = <0x1180000 0x0080000>;
+						read-only;
+					};
+
+					art: art@1200000 {
+						label = "art";
+						reg = <0x1200000 0x0140000>;
+						read-only;
+					};
+
+					artbak: art@1340000 {
+						label = "artbak";
+						reg = <0x1340000 0x0140000>;
+						read-only;
+					};
+
+					kernel@1480000 {
+						label = "kernel";
+						reg = <0x1480000 0x0200000>;
+					};
+
+					ubi@1680000 {
+						label = "ubi";
+						reg = <0x1680000 0x1E00000>;
+					};
+
+					netgear@3480000 {
+						label = "netgear";
+						reg = <0x3480000 0x4480000>;
+						read-only;
+					};
+
+					reserve@7900000 {
+						label = "reserve";
+						reg = <0x7900000 0x0700000>;
+						read-only;
+					};
+
+					firmware@1480000 {
+						label = "firmware";
+						reg = <0x1480000 0x2000000>;
+					};
+				};
+			};
+		};
+
+		mdio0: mdio {
+			compatible = "virtual,mdio-gpio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+			pinctrl-0 = <&mdio0_pins>;
+			pinctrl-names = "default";
+
+			phy0: ethernet-phy@0 {
+				device_type = "ethernet-phy";
+				reg = <0>;
+				qca,ar8327-initvals = <
+					0x00004 0x7600000   /* PAD0_MODE */
+					0x00008 0x1000000   /* PAD5_MODE */
+					0x0000c 0x80        /* PAD6_MODE */
+					0x000e4 0xaa545     /* MAC_POWER_SEL */
+					0x000e0 0xc74164de  /* SGMII_CTRL */
+					0x0007c 0x4e        /* PORT0_STATUS */
+					0x00094 0x4e        /* PORT6_STATUS */
+					>;
+			};
+
+			phy4: ethernet-phy@4 {
+				device_type = "ethernet-phy";
+				reg = <4>;
+			};
+		};
+
+		gmac1: ethernet@37200000 {
+			status = "ok";
+			phy-mode = "rgmii";
+			qcom,id = <1>;
+
+			pinctrl-0 = <&rgmii2_pins>;
+			pinctrl-names = "default";
+
+			mtd-mac-address = <&art 6>;
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		gmac2: ethernet@37400000 {
+			status = "ok";
+			phy-mode = "sgmii";
+			qcom,id = <2>;
+
+			mtd-mac-address = <&art 0>;
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		rpm@108000 {
+			pinctrl-0 = <&i2c4_pins>;
+			pinctrl-names = "default";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		wifi {
+			label = "wifi";
+			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+		usb1 {
+			label = "r7500v2:amber:usb1";
+			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb3 {
+			label = "r7500v2:amber:usb3";
+			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		status {
+			label = "r7500v2:amber:status";
+			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		internet {
+			label = "r7500v2:white:internet";
+			gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		wan {
+			label = "r7500v2:white:wan";
+			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		wps {
+			label = "r7500v2:white:wps";
+			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
+		};
+
+		esata {
+			label = "r7500v2:white:esata";
+			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+		};
+
+		power: power {
+			label = "r7500v2:white:power";
+			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+
+		wifi {
+			label = "r7500v2:white:wifi";
+			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&adm_dma {
+	status = "ok";
+};
diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts
new file mode 100644
index 0000000..561c49a
--- /dev/null
+++ b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts
@@ -0,0 +1,424 @@
+#include "qcom-ipq8064-v1.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "TP-Link Archer VR2600v";
+	compatible = "tplink,vr2600v", "qcom,ipq8064";
+
+	memory@0 {
+		reg = <0x42000000 0x1e000000>;
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		rsvd@41200000 {
+			reg = <0x41200000 0x300000>;
+			no-map;
+		};
+	};
+
+	aliases {
+		serial0 = &gsbi4_serial;
+		mdio-gpio0 = &mdio0;
+
+		led-boot = &power;
+		led-failsafe = &general;
+		led-running = &power;
+		led-upgrade = &general;
+	};
+
+	chosen {
+		linux,stdout-path = "serial0:115200n8";
+	};
+
+	soc {
+		pinmux@800000 {
+			led_pins: led_pins {
+				mux {
+					pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio17",
+						"gpio26", "gpio53", "gpio56", "gpio66";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			i2c4_pins: i2c4_pinmux {
+				mux {
+					pins = "gpio12", "gpio13";
+					function = "gsbi4";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
+
+			button_pins: button_pins {
+				mux {
+					pins = "gpio54", "gpio64", "gpio65", "gpio67", "gpio68";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			spi_pins: spi_pins {
+				mux {
+					pins = "gpio18", "gpio19", "gpio21";
+					function = "gsbi5";
+					bias-pull-down;
+				};
+
+				data {
+					pins = "gpio18", "gpio19";
+					drive-strength = <10>;
+				};
+
+				cs {
+					pins = "gpio20";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				clk {
+					pins = "gpio21";
+					drive-strength = <12>;
+				};
+			};
+
+			mdio0_pins: mdio0_pins {
+				mux {
+					pins = "gpio0", "gpio1";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+
+			rgmii2_pins: rgmii2_pins {
+				mux {
+					pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
+					       "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
+					function = "rgmii2";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+		};
+
+		gsbi@16300000 {
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+			status = "ok";
+			serial@16340000 {
+				status = "ok";
+			};
+			/*
+			 * The i2c device on gsbi4 should not be enabled.
+			 * On ipq806x designs gsbi4 i2c is meant for exclusive
+			 * RPM usage. Turning this on in kernel manifests as
+			 * i2c failure for the RPM.
+			 */
+		};
+
+		gsbi5: gsbi@1a200000 {
+			qcom,mode = <GSBI_PROT_SPI>;
+			status = "ok";
+
+			spi4: spi@1a280000 {
+				status = "ok";
+
+				pinctrl-0 = <&spi_pins>;
+				pinctrl-names = "default";
+
+				cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+				flash: W25Q128@0 {
+					compatible = "jedec,spi-nor";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+
+					SBL1@0 {
+						label = "SBL1";
+						reg = <0x0 0x20000>;
+						read-only;
+					};
+
+					MIBIB@20000 {
+						label = "MIBIB";
+						reg = <0x20000 0x20000>;
+						read-only;
+					};
+
+					SBL2@40000 {
+						label = "SBL2";
+						reg = <0x40000 0x40000>;
+						read-only;
+					};
+
+					SBL3@80000 {
+						label = "SBL3";
+						reg = <0x80000 0x80000>;
+						read-only;
+					};
+
+					DDRCONFIG@100000 {
+						label = "DDRCONFIG";
+						reg = <0x100000 0x10000>;
+						read-only;
+					};
+
+					SSD@110000 {
+						label = "SSD";
+						reg = <0x110000 0x10000>;
+						read-only;
+					};
+
+					TZ@120000 {
+						label = "TZ";
+						reg = <0x120000 0x80000>;
+						read-only;
+					};
+
+					RPM@1a0000 {
+						label = "RPM";
+						reg = <0x1a0000 0x80000>;
+						read-only;
+					};
+
+					APPSBL@220000 {
+						label = "APPSBL";
+						reg = <0x220000 0x80000>;
+						read-only;
+					};
+
+					APPSBLENV@2a0000 {
+						label = "APPSBLENV";
+						reg = <0x2a0000 0x40000>;
+						read-only;
+					};
+
+					OLDART@2e0000 {
+						label = "OLDART";
+						reg = <0x2e0000 0x40000>;
+						read-only;
+					};
+
+					kernel@320000 {
+						label = "kernel";
+						reg = <0x320000 0x200000>;
+					};
+
+					rootfs@520000 {
+						label = "rootfs";
+						reg = <0x520000 0xa60000>;
+					};
+
+					defaultmac: default-mac@0xfaf100 {
+						label = "default-mac";
+						reg = <0xfaf100 0x00200>;
+						read-only;
+					};
+
+					ART@fc0000 {
+						label = "ART";
+						reg = <0xfc0000 0x40000>;
+						read-only;
+					};
+				};
+			};
+		};
+
+		phy@100f8800 {		/* USB3 port 1 HS phy */
+			status = "ok";
+		};
+
+		phy@100f8830 {		/* USB3 port 1 SS phy */
+			status = "ok";
+		};
+
+		phy@110f8800 {		/* USB3 port 0 HS phy */
+			status = "ok";
+		};
+
+		phy@110f8830 {		/* USB3 port 0 SS phy */
+			status = "ok";
+		};
+
+		usb30@0 {
+			status = "ok";
+		};
+
+		usb30@1 {
+			status = "ok";
+		};
+
+		pcie0: pci@1b500000 {
+			status = "ok";
+		};
+
+		pcie1: pci@1b700000 {
+			status = "ok";
+			force_gen1 = <1>;
+		};
+
+		mdio0: mdio {
+			compatible = "virtual,mdio-gpio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+			pinctrl-0 = <&mdio0_pins>;
+			pinctrl-names = "default";
+
+			phy0: ethernet-phy@0 {
+				device_type = "ethernet-phy";
+				reg = <0>;
+				qca,ar8327-initvals = <
+					0x00004 0x7600000   /* PAD0_MODE */
+					0x00008 0x1000000   /* PAD5_MODE */
+					0x0000c 0x80        /* PAD6_MODE */
+					0x000e4 0x6a545     /* MAC_POWER_SEL */
+					0x000e0 0xc74164de  /* SGMII_CTRL */
+					0x0007c 0x4e        /* PORT0_STATUS */
+					0x00094 0x4e        /* PORT6_STATUS */
+					>;
+			};
+
+			phy4: ethernet-phy@4 {
+				device_type = "ethernet-phy";
+				reg = <4>;
+			};
+		};
+
+		gmac1: ethernet@37200000 {
+			status = "ok";
+			phy-mode = "rgmii";
+			qcom,id = <1>;
+
+			pinctrl-0 = <&rgmii2_pins>;
+			pinctrl-names = "default";
+
+			mtd-mac-address = <&defaultmac 0>;
+			mtd-mac-address-increment = <1>;
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		gmac2: ethernet@37400000 {
+			status = "ok";
+			phy-mode = "sgmii";
+			qcom,id = <2>;
+
+			mtd-mac-address = <&defaultmac 0>;
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		rpm@108000 {
+			pinctrl-0 = <&i2c4_pins>;
+			pinctrl-names = "default";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		wifi {
+			label = "wifi";
+			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+
+		dect {
+			label = "dect";
+			gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PHONE>;
+		};
+
+		ledswitch {
+			label = "ledswitch";
+			gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_LIGHTS_TOGGLE>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+		dsl {
+			label = "vr2600v:white:dsl";
+			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb {
+			label = "vr2600v:white:usb";
+			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		lan {
+			label = "vr2600v:white:lan";
+			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		wlan2g {
+			label = "vr2600v:white:wlan2g";
+			gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
+		};
+
+		wlan5g {
+			label = "vr2600v:white:wlan5g";
+			gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>;
+		};
+
+		power: power {
+			label = "vr2600v:white:power";
+			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+
+		phone {
+			label = "vr2600v:white:phone";
+			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+		};
+
+		wan {
+			label = "vr2600v:white:wan";
+			gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
+		};
+
+		general: general {
+			label = "vr2600v:white:general";
+			gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&adm_dma {
+	status = "ok";
+};
diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts
new file mode 100644
index 0000000..9440de5
--- /dev/null
+++ b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts
@@ -0,0 +1,570 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright (C) 2017 Christian Mehlis <christian@m3hlis.de>
+ *  Copyright (C) 2018 Mathias Kresin <dev@kresin.me>
+ *  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    1. Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *    2. Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *    3. Neither the names of the copyright holders nor the names of any
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "qcom-ipq8064-v1.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+	compatible = "compex,wpq864", "qcom,ipq8064";
+	model = "Compex WPQ864";
+
+	aliases {
+		mdio-gpio0 = &mdio0;
+		serial0 = &gsbi4_serial;
+		ethernet0 = &gmac1;
+		ethernet1 = &gmac0;
+
+		led-boot = &led_pass;
+		led-failsafe = &led_fail;
+		led-running = &led_pass;
+		led-upgrade = &led_pass;
+	};
+
+	chosen {
+		linux,stdout-path = "serial0:115200n8";
+	};
+
+	soc {
+		rpm@108000  {
+			pinctrl-0 = <&rpm_pins>;
+			pinctrl-names = "default";
+		};
+
+		nand@1ac00000 {
+			status = "okay";
+
+			pinctrl-0 = <&nand_pins>;
+			pinctrl-names = "default";
+
+			mt29f2g08abbeah4@0 {
+				compatible = "qcom,nandcs";
+
+				reg = <0>;
+
+				nand-ecc-strength = <4>;
+				nand-bus-width = <8>;
+				nand-ecc-step-size = <512>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					SBL1@0 {
+						label = "SBL1";
+						reg = <0x0000000 0x0040000>;
+						read-only;
+					};
+
+					MIBIB@40000 {
+						label = "MIBIB";
+						reg = <0x0040000 0x0140000>;
+						read-only;
+					};
+
+					SBL2@180000 {
+						label = "SBL2";
+						reg = <0x0180000 0x0140000>;
+						read-only;
+					};
+
+					SBL3@2c0000 {
+						label = "SBL3";
+						reg = <0x02c0000 0x0280000>;
+						read-only;
+					};
+
+					DDRCONFIG@540000 {
+						label = "DDRCONFIG";
+						reg = <0x0540000 0x0120000>;
+						read-only;
+					};
+
+					SSD@660000 {
+						label = "SSD";
+						reg = <0x0660000 0x0120000>;
+						read-only;
+					};
+
+					TZ@780000 {
+						label = "TZ";
+						reg = <0x0780000 0x0280000>;
+						read-only;
+					};
+
+					RPM@a00000 {
+						label = "RPM";
+						reg = <0x0a00000 0x0280000>;
+						read-only;
+					};
+
+					APPSBL@c80000 {
+						label = "APPSBL";
+						reg = <0x0c80000 0x0500000>;
+						read-only;
+					};
+
+					APPSBLENV@1180000 {
+						label = "APPSBLENV";
+						reg = <0x1180000 0x0080000>;
+					};
+
+					ART@1200000 {
+						label = "ART";
+						reg = <0x1200000 0x0140000>;
+					};
+
+					ubi@1340000 {
+						label = "ubi";
+						reg = <0x1340000 0x4000000>;
+					};
+
+					BOOTCONFIG@1340000 {
+						label = "BOOTCONFIG";
+						reg = <0x5340000 0x0060000>;
+					};
+
+					SBL2-1@53a0000- {
+						label = "SBL2_1";
+						reg = <0x53a0000 0x0140000>;
+						read-only;
+					};
+
+					SBL3-1@54e0000 {
+						label = "SBL3_1";
+						reg = <0x54e0000 0x0280000>;
+						read-only;
+					};
+
+					DDRCONFIG-1@5760000 {
+						label = "DDRCONFIG_1";
+						reg = <0x5760000 0x0120000>;
+						read-only;
+					};
+
+					SSD-1@5880000 {
+						label = "SSD_1";
+						reg = <0x5880000 0x0120000>;
+						read-only;
+					};
+
+					TZ-1@59a0000 {
+						label = "TZ_1";
+						reg = <0x59a0000 0x0280000>;
+						read-only;
+					};
+
+					RPM-1@5c20000 {
+						label = "RPM_1";
+						reg = <0x5c20000 0x0280000>;
+						read-only;
+					};
+
+					BOOTCONFIG1@5ea0000 {
+						label = "BOOTCONFIG1";
+						reg = <0x5ea0000 0x0060000>;
+					};
+
+					APPSBL-1@5f00000 {
+						label = "APPSBL_1";
+						reg = <0x5f00000 0x0500000>;
+						read-only;
+					};
+
+					ubi-1@6400000 {
+						label = "ubi_1";
+						reg = <0x6400000 0x4000000>;
+					};
+
+					unused@a400000 {
+						label = "unused";
+						reg = <0xa400000 0x5c00000>;
+					};
+				};
+			};
+		};
+	};
+
+	mdio0: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		compatible = "virtual,mdio-gpio";
+
+		pinctrl-0 = <&mdio0_pins>;
+		pinctrl-names = "default";
+
+		gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+
+		ethernet-phy@0 {
+			device_type = "ethernet-phy";
+			reg = <0>;
+			qca,ar8327-initvals = <
+				0x00004 0x7600000   /* PAD0_MODE */
+				0x00008 0x1000000   /* PAD5_MODE */
+				0x0000c 0x80        /* PAD6_MODE */
+				0x000e4 0x6a545     /* MAC_POWER_SEL */
+				0x000e0 0xc74164de  /* SGMII_CTRL */
+				0x0007c 0x4e        /* PORT0_STATUS */
+				0x00094 0x4e        /* PORT6_STATUS */
+				>;
+		};
+
+		ethernet-phy@4 {
+			device_type = "ethernet-phy";
+			reg = <4>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+		rss4 {
+			label = "wpq864:green:rss4";
+			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		rss3 {
+			label = "wpq864:green:rss3";
+			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+
+		rss2 {
+			label = "wpq864:orange:rss2";
+			gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>;
+		};
+
+		rss1 {
+			label = "wpq864:red:rss1";
+			gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_pass: pass {
+			label = "wpq864:green:pass";
+			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_fail: fail {
+			label = "wpq864:green:fail";
+			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb {
+			label = "wpq864:green:usb";
+			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb-pcie {
+			label = "wpq864:green:usb-pcie";
+			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		reset {
+			label = "reset";
+			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	beeper {
+		compatible = "gpio-beeper";
+
+		pinctrl-0 = <&beeper_pins>;
+		pinctrl-names = "default";
+
+		gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&adm_dma {
+	status = "okay";
+};
+
+&gmac1 {
+	status = "okay";
+
+	pinctrl-0 = <&rgmii2_pins>;
+	pinctrl-names = "default";
+
+	phy-mode = "rgmii";
+	qcom,id = <1>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&gmac2 {
+	status = "okay";
+
+	phy-mode = "sgmii";
+	qcom,id = <2>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&gsbi4 {
+	status = "okay";
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+};
+
+&gsbi4_serial {
+	status = "okay";
+
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+};
+
+&gsbi5 {
+	status = "okay";
+
+	qcom,mode = <GSBI_PROT_SPI>;
+
+	spi@1a280000 {
+		status = "okay";
+
+		pinctrl-0 = <&spi_pins>;
+		pinctrl-names = "default";
+
+		cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+		s25fl256s1@0 {
+			compatible = "jedec,spi-nor";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0>;
+			spi-max-frequency = <50000000>;
+		};
+	};
+};
+
+&hs_phy_0 {		/* USB3 port 0 HS phy */
+	status = "okay";
+};
+
+&hs_phy_1 {		/* USB3 port 1 HS phy */
+	status = "okay";
+};
+
+&ss_phy_0 {		/* USB3 port 0 SS phy */
+	status = "okay";
+
+	rx_eq = <2>;
+	tx_deamp_3_5db = <32>;
+	mpll = <160>;
+};
+
+&ss_phy_1 {		/* USB3 port 1 SS phy */
+	status = "okay";
+
+	rx_eq = <2>;
+	tx_deamp_3_5db = <32>;
+	mpll = <160>;
+};
+
+&pcie0 {
+	status = "okay";
+
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	/delete-property/ perst-gpios;
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	/delete-property/ perst-gpios;
+};
+
+&qcom_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&state_default>;
+
+	state_default: pinctrl0 {
+		pcie0_pcie2_perst {
+			pins = "gpio3";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	led_pins: led_pins {
+		mux {
+			pins = "gpio7", "gpio8", "gpio9",  "gpio22",
+			       "gpio23", "gpio24", "gpio25", "gpio53";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	button_pins: button_pins {
+		mux {
+			pins = "gpio54";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	beeper_pins: beeper_pins {
+		mux {
+			pins = "gpio55";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	rpm_pins: rpm_pins {
+		mux {
+			pins = "gpio12", "gpio13";
+			function = "gsbi4";
+			drive-strength = <10>;
+			bias-disable;
+		};
+	};
+
+	uart0_pins: uart0_pins {
+		mux {
+			pins = "gpio10", "gpio11";
+			function = "gsbi4";
+			drive-strength = <10>;
+			bias-disable;
+		};
+	};
+
+	spi_pins: spi_pins {
+		mux {
+			pins = "gpio18", "gpio19";
+			function = "gsbi5";
+			drive-strength = <10>;
+			bias-pull-down;
+		};
+
+		clk {
+			pins = "gpio21";
+			function = "gsbi5";
+			drive-strength = <12>;
+			bias-pull-down;
+		};
+
+		cs {
+			pins = "gpio20";
+			function = "gpio";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+	};
+
+	nand_pins: nand_pins {
+		mux {
+			pins = "gpio34", "gpio35", "gpio36", "gpio37",
+			       "gpio38", "gpio39", "gpio40", "gpio41",
+			       "gpio42", "gpio43", "gpio44", "gpio45",
+			       "gpio46", "gpio47";
+			function = "nand";
+			drive-strength = <10>;
+			bias-disable;
+		};
+
+		pullups {
+			pins = "gpio39";
+			bias-pull-up;
+		};
+
+		hold {
+			pins = "gpio40", "gpio41", "gpio42", "gpio43",
+			       "gpio44", "gpio45", "gpio46", "gpio47";
+			bias-bus-hold;
+		};
+	};
+
+	mdio0_pins: mdio0_pins {
+		mux {
+			pins = "gpio0", "gpio1";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	rgmii2_pins: rgmii2_pins {
+		mux {
+			pins = "gpio27", "gpio28", "gpio29", "gpio30",
+			       "gpio31", "gpio32", "gpio51", "gpio52",
+			       "gpio59", "gpio60", "gpio61", "gpio62";
+			function = "rgmii2";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+
+&usb3_1 {
+	status = "okay";
+};
+
+&tcsr {
+	qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
+};
diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064.dtsi b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064.dtsi
new file mode 100644
index 0000000..90f7a10
--- /dev/null
+++ b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -0,0 +1,1333 @@
+/dts-v1/;
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/clock/qcom,lcc-ipq806x.h>
+#include <dt-bindings/soc/qcom,gsbi.h>
+#include <dt-bindings/reset/qcom,gcc-ipq806x.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Qualcomm IPQ8064";
+	compatible = "qcom,ipq8064";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc0>;
+			qcom,saw = <&saw0>;
+			clocks = <&kraitcc 0>, <&kraitcc 4>;
+			clock-names = "cpu", "l2";
+			clock-latency = <100000>;
+			cpu-supply = <&smb208_s2a>;
+			voltage-tolerance = <5>;
+			cooling-min-state = <0>;
+			cooling-max-state = <10>;
+			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_SPC>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc1>;
+			qcom,saw = <&saw1>;
+			clocks = <&kraitcc 1>, <&kraitcc 4>;
+			clock-names = "cpu", "l2";
+			clock-latency = <100000>;
+			cpu-supply = <&smb208_s2b>;
+			cooling-min-state = <0>;
+			cooling-max-state = <10>;
+			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_SPC>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			qcom,saw = <&saw_l2>;
+		};
+
+		qcom,l2 {
+			qcom,l2-rates = <384000000 1000000000 1200000000>;
+		};
+
+		idle-states {
+			CPU_SPC: spc {
+				compatible = "qcom,idle-state-spc",
+						"arm,idle-state";
+				entry-latency-us = <400>;
+				exit-latency-us = <900>;
+				min-residency-us = <3000>;
+			};
+		};
+	};
+
+	thermal-zones {
+		tsens_tz_sensor0 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 0>;
+
+			trips {
+				cpu-critical-hi {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical_high";
+				};
+
+				cpu-config-hi {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "configurable_hi";
+				};
+
+				cpu-config-lo {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "configurable_lo";
+				};
+
+				cpu-critical-low {
+					temperature = <0>;
+					hysteresis = <2000>;
+					type = "critical_low";
+				};
+			};
+		};
+
+		tsens_tz_sensor1 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				cpu-critical-hi {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical_high";
+				};
+
+				cpu-config-hi {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "configurable_hi";
+				};
+
+				cpu-config-lo {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "configurable_lo";
+				};
+
+				cpu-critical-low {
+					temperature = <0>;
+					hysteresis = <2000>;
+					type = "critical_low";
+				};
+			};
+		};
+
+		tsens_tz_sensor2 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 2>;
+
+			trips {
+				cpu-critical-hi {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical_high";
+				};
+
+				cpu-config-hi {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "configurable_hi";
+				};
+
+				cpu-config-lo {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "configurable_lo";
+				};
+
+				cpu-critical-low {
+					temperature = <0>;
+					hysteresis = <2000>;
+					type = "critical_low";
+				};
+			};
+		};
+
+		tsens_tz_sensor3 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 3>;
+
+			trips {
+				cpu-critical-hi {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical_high";
+				};
+
+				cpu-config-hi {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "configurable_hi";
+				};
+
+				cpu-config-lo {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "configurable_lo";
+				};
+
+				cpu-critical-low {
+					temperature = <0>;
+					hysteresis = <2000>;
+					type = "critical_low";
+				};
+			};
+		};
+
+		tsens_tz_sensor4 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				cpu-critical-hi {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical_high";
+				};
+
+				cpu-config-hi {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "configurable_hi";
+				};
+
+				cpu-config-lo {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "configurable_lo";
+				};
+
+				cpu-critical-low {
+					temperature = <0>;
+					hysteresis = <2000>;
+					type = "critical_low";
+				};
+			};
+		};
+
+		tsens_tz_sensor5 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				cpu-critical-hi {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical_high";
+				};
+
+				cpu-config-hi {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "configurable_hi";
+				};
+
+				cpu-config-lo {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "configurable_lo";
+				};
+
+				cpu-critical-low {
+					temperature = <0>;
+					hysteresis = <2000>;
+					type = "critical_low";
+				};
+			};
+		};
+
+		tsens_tz_sensor6 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 6>;
+
+			trips {
+				cpu-critical-hi {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical_high";
+				};
+
+				cpu-config-hi {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "configurable_hi";
+				};
+
+				cpu-config-lo {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "configurable_lo";
+				};
+
+				cpu-critical-low {
+					temperature = <0>;
+					hysteresis = <2000>;
+					type = "critical_low";
+				};
+			};
+		};
+
+		tsens_tz_sensor7 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				cpu-critical-hi {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical_high";
+				};
+
+				cpu-config-hi {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "configurable_hi";
+				};
+
+				cpu-config-lo {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "configurable_lo";
+				};
+
+				cpu-critical-low {
+					temperature = <0>;
+					hysteresis = <2000>;
+					type = "critical_low";
+				};
+			};
+		};
+
+		tsens_tz_sensor8 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				cpu-critical-hi {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical_high";
+				};
+
+				cpu-config-hi {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "configurable_hi";
+				};
+
+				cpu-config-lo {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "configurable_lo";
+				};
+
+				cpu-critical-low {
+					temperature = <0>;
+					hysteresis = <2000>;
+					type = "critical_low";
+				};
+			};
+		};
+
+		tsens_tz_sensor9 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 9>;
+
+			trips {
+				cpu-critical-hi {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical_high";
+				};
+
+				cpu-config-hi {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "configurable_hi";
+				};
+
+				cpu-config-lo {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "configurable_lo";
+				};
+
+				cpu-critical-low {
+					temperature = <0>;
+					hysteresis = <2000>;
+					type = "critical_low";
+				};
+			};
+		};
+
+		tsens_tz_sensor10 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 10>;
+
+			trips {
+				cpu-critical-hi {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical_high";
+				};
+
+				cpu-config-hi {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "configurable_hi";
+				};
+
+				cpu-config-lo {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "configurable_lo";
+				};
+
+				cpu-critical-low {
+					temperature = <0>;
+					hysteresis = <2000>;
+					type = "critical_low";
+				};
+			};
+		};
+	};
+
+	cpu-pmu {
+		compatible = "qcom,krait-pmu";
+		interrupts = <1 10 0x304>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		nss@40000000 {
+			reg = <0x40000000 0x1000000>;
+			no-map;
+		};
+
+		smem: smem@41000000 {
+			reg = <0x41000000 0x200000>;
+			no-map;
+		};
+	};
+
+	clocks {
+		cxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+
+		pxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			#clock-cells = <0>;
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-ipq806x";
+		};
+	};
+
+	kraitcc: clock-controller {
+		compatible = "qcom,krait-cc-v1";
+		#clock-cells = <1>;
+	};
+
+	qcom,pvs {
+		qcom,pvs-format-a;
+		qcom,speed0-pvs0-bin-v0 =
+			< 1400000000 1250000 >,
+			< 1200000000 1200000 >,
+			< 1000000000 1150000 >,
+			 < 800000000 1100000 >,
+			 < 600000000 1050000 >,
+			 < 384000000 1000000 >;
+
+		qcom,speed0-pvs1-bin-v0 =
+			< 1400000000 1175000 >,
+			< 1200000000 1125000 >,
+			< 1000000000 1075000 >,
+			 < 800000000 1025000 >,
+			 < 600000000  975000 >,
+			 < 384000000  925000 >;
+
+		qcom,speed0-pvs2-bin-v0 =
+			< 1400000000 1125000 >,
+			< 1200000000 1075000 >,
+			< 1000000000 1025000 >,
+			 < 800000000  995000 >,
+			 < 600000000  925000 >,
+			 < 384000000  875000 >;
+
+		qcom,speed0-pvs3-bin-v0 =
+			< 1400000000 1050000 >,
+			< 1200000000 1000000 >,
+			< 1000000000  950000 >,
+			 < 800000000  900000 >,
+			 < 600000000  850000 >,
+			 < 384000000  800000 >;
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		lpass@28100000 {
+			compatible = "qcom,lpass-cpu";
+			status = "disabled";
+			clocks = <&lcc AHBIX_CLK>,
+					<&lcc MI2S_OSR_CLK>,
+					<&lcc MI2S_BIT_CLK>;
+			clock-names = "ahbix-clk",
+					"mi2s-osr-clk",
+					"mi2s-bit-clk";
+			interrupts = <0 85 1>;
+			interrupt-names = "lpass-irq-lpaif";
+			reg = <0x28100000 0x10000>;
+			reg-names = "lpass-lpaif";
+		};
+
+		qfprom: qfprom@700000 {
+			compatible = "qcom,qfprom", "syscon";
+			reg = <0x700000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "okay";
+			tsens_calib: calib@400 {
+				reg = <0x400 0x10>;
+			};
+			tsens_backup: backup@410 {
+				reg = <0x410 0x10>;
+			};
+		};
+
+		rpm@108000 {
+			compatible = "qcom,rpm-ipq8064";
+			reg = <0x108000 0x1000>;
+			qcom,ipc = <&l2cc 0x8 2>;
+
+			interrupts = <0 19 0>,
+				     <0 21 0>,
+				     <0 22 0>;
+			interrupt-names = "ack",
+					  "err",
+					  "wakeup";
+
+			clocks = <&gcc RPM_MSG_RAM_H_CLK>;
+			clock-names = "ram";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rpmcc: clock-controller {
+				compatible	= "qcom,rpmcc-ipq806x", "qcom,rpmcc";
+				#clock-cells = <1>;
+			};
+
+			regulators {
+				compatible = "qcom,rpm-smb208-regulators";
+
+				smb208_s1a: s1a {
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1150000>;
+
+					qcom,switch-mode-frequency = <1200000>;
+
+				};
+
+				smb208_s1b: s1b {
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1150000>;
+
+					qcom,switch-mode-frequency = <1200000>;
+				};
+
+				smb208_s2a: s2a {
+					regulator-min-microvolt = < 800000>;
+					regulator-max-microvolt = <1250000>;
+
+					qcom,switch-mode-frequency = <1200000>;
+				};
+
+				smb208_s2b: s2b {
+					regulator-min-microvolt = < 800000>;
+					regulator-max-microvolt = <1250000>;
+
+					qcom,switch-mode-frequency = <1200000>;
+				};
+			};
+		};
+
+		rng@1a500000 {
+			compatible = "qcom,prng";
+			reg = <0x1a500000 0x200>;
+			clocks = <&gcc PRNG_CLK>;
+			clock-names = "core";
+		};
+
+		qcom_pinmux: pinmux@800000 {
+			compatible = "qcom,ipq8064-pinctrl";
+			reg = <0x800000 0x4000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <0 16 0x4>;
+
+			pcie0_pins: pcie0_pinmux {
+				mux {
+					pins = "gpio3";
+					function = "pcie1_rst";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			pcie1_pins: pcie1_pinmux {
+				mux {
+					pins = "gpio48";
+					function = "pcie2_rst";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			pcie2_pins: pcie2_pinmux {
+				mux {
+					pins = "gpio63";
+					function = "pcie3_rst";
+					drive-strength = <2>;
+					bias-disable;
+					output-low;
+				};
+			};
+		};
+
+		intc: interrupt-controller@2000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x02000000 0x1000>,
+			      <0x02002000 0x1000>;
+		};
+
+		timer@200a000 {
+			compatible = "qcom,kpss-timer", "qcom,msm-timer";
+			interrupts = <1 1 0x301>,
+				     <1 2 0x301>,
+				     <1 3 0x301>,
+				     <1 4 0x301>,
+				     <1 5 0x301>;
+			reg = <0x0200a000 0x100>;
+			clock-frequency = <25000000>,
+					  <32768>;
+			clocks = <&sleep_clk>;
+			clock-names = "sleep";
+			cpu-offset = <0x80000>;
+		};
+
+		acc0: clock-controller@2088000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+			clock-output-names = "acpu0_aux";
+		};
+
+		acc1: clock-controller@2098000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+			clock-output-names = "acpu1_aux";
+		};
+
+		l2cc: clock-controller@2011000 {
+			compatible = "qcom,kpss-gcc", "syscon";
+			reg = <0x2011000 0x1000>;
+			clock-output-names = "acpu_l2_aux";
+ 		};
+
+		saw0: regulator@2089000 {
+			compatible = "qcom,saw2", "syscon";
+			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		saw1: regulator@2099000 {
+			compatible = "qcom,saw2", "syscon";
+			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		saw_l2: regulator@02012000 {
+			compatible = "qcom,saw2", "syscon";
+			reg = <0x02012000 0x1000>;
+			regulator;
+		};
+ 
+		sic_non_secure: sic-non-secure@12100000 {
+			compatible = "syscon";
+			reg = <0x12100000 0x10000>;
+		};
+
+		gsbi2: gsbi@12480000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <2>;
+			reg = <0x12480000 0x100>;
+			clocks = <&gcc GSBI2_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			syscon-tcsr = <&tcsr>;
+
+			uart2: serial@12490000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x12490000 0x1000>,
+				      <0x12480000 0x1000>;
+				interrupts = <0 195 0x0>;
+				clocks = <&gcc GSBI2_UART_CLK>, <&gcc GSBI2_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			i2c@124a0000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x124a0000 0x1000>;
+				interrupts = <0 196 0>;
+
+				clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+		};
+
+		gsbi4: gsbi@16300000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <4>;
+			reg = <0x16300000 0x100>;
+			clocks = <&gcc GSBI4_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			syscon-tcsr = <&tcsr>;
+
+			gsbi4_serial: serial@16340000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16340000 0x1000>,
+				      <0x16300000 0x1000>;
+				interrupts = <0 152 0x0>;
+				clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			i2c@16380000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x16380000 0x1000>;
+				interrupts = <0 153 0>;
+
+				clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		gsbi5: gsbi@1a200000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <5>;
+			reg = <0x1a200000 0x100>;
+			clocks = <&gcc GSBI5_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			syscon-tcsr = <&tcsr>;
+
+			uart5: serial@1a240000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x1a240000 0x1000>,
+				      <0x1a200000 0x1000>;
+				interrupts = <0 154 0x0>;
+				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			i2c@1a280000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x1a280000 0x1000>;
+				interrupts = <0 155 0>;
+
+				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			spi@1a280000 {
+				compatible = "qcom,spi-qup-v1.1.1";
+				reg = <0x1a280000 0x1000>;
+				interrupts = <0 155 0>;
+
+				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		sata_phy: sata-phy@1b400000 {
+			compatible = "qcom,ipq806x-sata-phy";
+			reg = <0x1b400000 0x200>;
+
+			clocks = <&gcc SATA_PHY_CFG_CLK>;
+			clock-names = "cfg";
+
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		sata@29000000 {
+			compatible = "qcom,ipq806x-ahci", "generic-ahci";
+			reg = <0x29000000 0x180>;
+
+			interrupts = <0 209 0x0>;
+
+			clocks = <&gcc SFAB_SATA_S_H_CLK>,
+				 <&gcc SATA_H_CLK>,
+				 <&gcc SATA_A_CLK>,
+				 <&gcc SATA_RXOOB_CLK>,
+				 <&gcc SATA_PMALIVE_CLK>;
+			clock-names = "slave_face", "iface", "core",
+					"rxoob", "pmalive";
+
+			assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>;
+			assigned-clock-rates = <100000000>, <100000000>;
+
+			phys = <&sata_phy>;
+			phy-names = "sata-phy";
+			status = "disabled";
+		};
+
+		qcom,ssbi@500000 {
+			compatible = "qcom,ssbi";
+			reg = <0x00500000 0x1000>;
+			qcom,controller-type = "pmic-arbiter";
+		};
+
+		gcc: clock-controller@900000 {
+			compatible = "qcom,gcc-ipq8064";
+			reg = <0x00900000 0x4000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		tsens: thermal-sensor@900000 {
+			compatible = "qcom,ipq8064-tsens";
+			reg = <0x900000 0x3680>;
+			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+			nvmem-cell-names = "calib", "calib_backup";
+			interrupts = <0 178 0>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		tcsr: syscon@1a400000 {
+			compatible = "qcom,tcsr-ipq8064", "syscon";
+			reg = <0x1a400000 0x100>;
+		};
+
+		lcc: clock-controller@28000000 {
+			compatible = "qcom,lcc-ipq8064";
+			reg = <0x28000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		sfpb_mutex_block: syscon@1200600 {
+			compatible = "syscon";
+			reg = <0x01200600 0x100>;
+		};
+
+		hs_phy_1: phy@100f8800 {
+			compatible = "qcom,dwc3-hs-usb-phy";
+			reg = <0x100f8800 0x30>;
+			clocks = <&gcc USB30_1_UTMI_CLK>;
+			clock-names = "ref";
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		ss_phy_1: phy@100f8830 {
+			compatible = "qcom,dwc3-ss-usb-phy";
+			reg = <0x100f8830 0x30>;
+			clocks = <&gcc USB30_1_MASTER_CLK>;
+			clock-names = "ref";
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		hs_phy_0: phy@110f8800 {
+			compatible = "qcom,dwc3-hs-usb-phy";
+			reg = <0x110f8800 0x30>;
+			clocks = <&gcc USB30_0_UTMI_CLK>;
+			clock-names = "ref";
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		ss_phy_0: phy@110f8830 {
+			compatible = "qcom,dwc3-ss-usb-phy";
+			reg = <0x110f8830 0x30>;
+			clocks = <&gcc USB30_0_MASTER_CLK>;
+			clock-names = "ref";
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb3_0: usb30@0 {
+			compatible = "qcom,dwc3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&gcc USB30_0_MASTER_CLK>;
+			clock-names = "core";
+
+			ranges;
+
+			resets = <&gcc USB30_0_MASTER_RESET>;
+			reset-names = "usb30_0_mstr_rst";
+
+			status = "disabled";
+
+			dwc3@11000000 {
+				compatible = "snps,dwc3";
+				reg = <0x11000000 0xcd00>;
+				interrupts = <0 110 0x4>;
+				phys = <&hs_phy_0>, <&ss_phy_0>;
+				phy-names = "usb2-phy", "usb3-phy";
+				dr_mode = "host";
+				snps,dis_u3_susphy_quirk;
+			};
+		};
+
+		usb3_1: usb30@1 {
+			compatible = "qcom,dwc3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&gcc USB30_1_MASTER_CLK>;
+			clock-names = "core";
+
+			ranges;
+
+			resets = <&gcc USB30_1_MASTER_RESET>;
+			reset-names = "usb30_1_mstr_rst";
+
+			status = "disabled";
+
+			dwc3@10000000 {
+				compatible = "snps,dwc3";
+				reg = <0x10000000 0xcd00>;
+				interrupts = <0 205 0x4>;
+				phys = <&hs_phy_1>, <&ss_phy_1>;
+				phy-names = "usb2-phy", "usb3-phy";
+				dr_mode = "host";
+				snps,dis_u3_susphy_quirk;
+			};
+		};
+
+		pcie0: pci@1b500000 {
+			compatible = "qcom,pcie-ipq8064";
+			reg = <0x1b500000 0x1000
+			       0x1b502000 0x80
+			       0x1b600000 0x100
+			       0x0ff00000 0x100000>;
+			reg-names = "dbi", "elbi", "parf", "config";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00100000   /* downstream I/O */
+				  0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */
+
+			interrupts = <GIC_SPI 35 IRQ_TYPE_NONE>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc PCIE_A_CLK>,
+				 <&gcc PCIE_H_CLK>,
+				 <&gcc PCIE_PHY_CLK>,
+				 <&gcc PCIE_AUX_CLK>,
+				 <&gcc PCIE_ALT_REF_CLK>;
+			clock-names = "core", "iface", "phy", "aux", "ref";
+
+			assigned-clocks = <&gcc PCIE_ALT_REF_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			resets = <&gcc PCIE_ACLK_RESET>,
+				 <&gcc PCIE_HCLK_RESET>,
+				 <&gcc PCIE_POR_RESET>,
+				 <&gcc PCIE_PCI_RESET>,
+				 <&gcc PCIE_PHY_RESET>,
+				 <&gcc PCIE_EXT_RESET>;
+			reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
+
+			pinctrl-0 = <&pcie0_pins>;
+			pinctrl-names = "default";
+
+			perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
+
+			phy-tx0-term-offset = <7>;
+
+			status = "disabled";
+		};
+
+		pcie1: pci@1b700000 {
+			compatible = "qcom,pcie-ipq8064";
+			reg = <0x1b700000 0x1000
+			       0x1b702000 0x80
+			       0x1b800000 0x100
+			       0x31f00000 0x100000>;
+			reg-names = "dbi", "elbi", "parf", "config";
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00100000   /* downstream I/O */
+				  0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */
+
+			interrupts = <GIC_SPI 57 IRQ_TYPE_NONE>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc PCIE_1_A_CLK>,
+				 <&gcc PCIE_1_H_CLK>,
+				 <&gcc PCIE_1_PHY_CLK>,
+				 <&gcc PCIE_1_AUX_CLK>,
+				 <&gcc PCIE_1_ALT_REF_CLK>;
+			clock-names = "core", "iface", "phy", "aux", "ref";
+
+			assigned-clocks = <&gcc PCIE_1_ALT_REF_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			resets = <&gcc PCIE_1_ACLK_RESET>,
+				 <&gcc PCIE_1_HCLK_RESET>,
+				 <&gcc PCIE_1_POR_RESET>,
+				 <&gcc PCIE_1_PCI_RESET>,
+				 <&gcc PCIE_1_PHY_RESET>,
+				 <&gcc PCIE_1_EXT_RESET>;
+			reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
+
+			pinctrl-0 = <&pcie1_pins>;
+			pinctrl-names = "default";
+
+			perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
+
+			phy-tx0-term-offset = <7>;
+
+			status = "disabled";
+		};
+
+		pcie2: pci@1b900000 {
+			compatible = "qcom,pcie-ipq8064";
+			reg = <0x1b900000 0x1000
+			       0x1b902000 0x80
+			       0x1ba00000 0x100
+			       0x35f00000 0x100000>;
+			reg-names = "dbi", "elbi", "parf", "config";
+			device_type = "pci";
+			linux,pci-domain = <2>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00100000   /* downstream I/O */
+				  0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */
+
+			interrupts = <GIC_SPI 71 IRQ_TYPE_NONE>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc PCIE_2_A_CLK>,
+				 <&gcc PCIE_2_H_CLK>,
+				 <&gcc PCIE_2_PHY_CLK>,
+				 <&gcc PCIE_2_AUX_CLK>,
+				 <&gcc PCIE_2_ALT_REF_CLK>;
+			clock-names = "core", "iface", "phy", "aux", "ref";
+
+			assigned-clocks = <&gcc PCIE_2_ALT_REF_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			resets = <&gcc PCIE_2_ACLK_RESET>,
+				 <&gcc PCIE_2_HCLK_RESET>,
+				 <&gcc PCIE_2_POR_RESET>,
+				 <&gcc PCIE_2_PCI_RESET>,
+				 <&gcc PCIE_2_PHY_RESET>,
+				 <&gcc PCIE_2_EXT_RESET>;
+			reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
+
+			pinctrl-0 = <&pcie2_pins>;
+			pinctrl-names = "default";
+
+			perst-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
+
+			phy-tx0-term-offset = <7>;
+
+			status = "disabled";
+		};
+
+		adm_dma: dma@18300000 {
+			compatible = "qcom,adm";
+			reg = <0x18300000 0x100000>;
+			interrupts = <0 170 0>;
+			#dma-cells = <1>;
+
+			clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
+			clock-names = "core", "iface";
+
+			resets = <&gcc ADM0_RESET>,
+				 <&gcc ADM0_PBUS_RESET>,
+				 <&gcc ADM0_C0_RESET>,
+				 <&gcc ADM0_C1_RESET>,
+				 <&gcc ADM0_C2_RESET>;
+			reset-names = "clk", "pbus", "c0", "c1", "c2";
+			qcom,ee = <0>;
+
+			status = "disabled";
+		};
+
+		nand@1ac00000 {
+			compatible = "qcom,ipq806x-nand";
+			reg = <0x1ac00000 0x800>;
+
+			clocks = <&gcc EBI2_CLK>,
+				 <&gcc EBI2_AON_CLK>;
+			clock-names = "core", "aon";
+
+			dmas = <&adm_dma 3>;
+			dma-names = "rxtx";
+			qcom,cmd-crci = <15>;
+			qcom,data-crci = <3>;
+
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		nss_common: syscon@03000000 {
+			compatible = "syscon";
+			reg = <0x03000000 0x0000FFFF>;
+		};
+
+		qsgmii_csr: syscon@1bb00000 {
+			compatible = "syscon";
+			reg = <0x1bb00000 0x000001FF>;
+		};
+
+		stmmac_axi_setup: stmmac-axi-config {
+			snps,wr_osr_lmt = <7>;
+			snps,rd_osr_lmt = <7>;
+			snps,blen = <16 0 0 0 0 0 0>;
+		};
+
+		gmac0: ethernet@37000000 {
+			device_type = "network";
+			compatible = "qcom,ipq806x-gmac";
+			reg = <0x37000000 0x200000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,pbl = <32>;
+			snps,aal = <1>;
+
+			qcom,nss-common = <&nss_common>;
+			qcom,qsgmii-csr = <&qsgmii_csr>;
+
+			clocks = <&gcc GMAC_CORE1_CLK>;
+			clock-names = "stmmaceth";
+
+			resets = <&gcc GMAC_CORE1_RESET>;
+			reset-names = "stmmaceth";
+
+			status = "disabled";
+		};
+
+		gmac1: ethernet@37200000 {
+			device_type = "network";
+			compatible = "qcom,ipq806x-gmac";
+			reg = <0x37200000 0x200000>;
+			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,pbl = <32>;
+			snps,aal = <1>;
+
+			qcom,nss-common = <&nss_common>;
+			qcom,qsgmii-csr = <&qsgmii_csr>;
+
+			clocks = <&gcc GMAC_CORE2_CLK>;
+			clock-names = "stmmaceth";
+
+			resets = <&gcc GMAC_CORE2_RESET>;
+			reset-names = "stmmaceth";
+
+			status = "disabled";
+		};
+
+		gmac2: ethernet@37400000 {
+			device_type = "network";
+			compatible = "qcom,ipq806x-gmac";
+			reg = <0x37400000 0x200000>;
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,pbl = <32>;
+			snps,aal = <1>;
+
+			qcom,nss-common = <&nss_common>;
+			qcom,qsgmii-csr = <&qsgmii_csr>;
+
+			clocks = <&gcc GMAC_CORE3_CLK>;
+			clock-names = "stmmaceth";
+
+			resets = <&gcc GMAC_CORE3_RESET>;
+			reset-names = "stmmaceth";
+
+			status = "disabled";
+		};
+
+		gmac3: ethernet@37600000 {
+			device_type = "network";
+			compatible = "qcom,ipq806x-gmac";
+			reg = <0x37600000 0x200000>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,pbl = <32>;
+			snps,aal = <1>;
+
+			qcom,nss-common = <&nss_common>;
+			qcom,qsgmii-csr = <&qsgmii_csr>;
+
+			clocks = <&gcc GMAC_CORE4_CLK>;
+			clock-names = "stmmaceth";
+
+			resets = <&gcc GMAC_CORE4_RESET>;
+			reset-names = "stmmaceth";
+
+			status = "disabled";
+		};
+	};
+
+	sfpb_mutex: sfpb-mutex {
+		compatible = "qcom,sfpb-mutex";
+		syscon = <&sfpb_mutex_block 4 4>;
+
+		#hwlock-cells = <1>;
+	};
+
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem>;
+		hwlocks = <&sfpb_mutex 3>;
+	};
+};
diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
new file mode 100644
index 0000000..2f82979
--- /dev/null
+++ b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
@@ -0,0 +1,393 @@
+#include "qcom-ipq8065-v1.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "ZyXEL NBG6817";
+	compatible = "zyxel,nbg6817", "qcom,ipq8065";
+
+	memory@0 {
+		reg = <0x42000000 0x1e000000>;
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		rsvd@41200000 {
+			reg = <0x41200000 0x300000>;
+			no-map;
+		};
+	};
+
+	aliases {
+		serial0 = &gsbi4_serial;
+		mdio-gpio0 = &mdio0;
+		sdcc1 = &sdcc1;
+
+		led-boot = &power;
+		led-failsafe = &power;
+		led-running = &power;
+		led-upgrade = &power;
+	};
+
+	chosen {
+		bootargs = "rootfstype=squashfs,ext4 rootwait noinitrd";
+		linux,stdout-path = "serial0:115200n8";
+		append-rootblock = "root=/dev/mmcblk0p";
+	};
+
+	soc {
+		pinmux@800000 {
+			button_pins: button_pins {
+				mux {
+					pins = "gpio53", "gpio54", "gpio65";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			i2c4_pins: i2c4_pinmux {
+				mux {
+					pins = "gpio12", "gpio13";
+					function = "gsbi4";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
+
+			led_pins: led_pins {
+				mux {
+					pins = "gpio9", "gpio26", "gpio33", "gpio64";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			mdio0_pins: mdio0_pins {
+				mux {
+					pins = "gpio0", "gpio1";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-disable;
+				};
+
+				clk {
+					pins = "gpio1";
+					input-disable;
+				};
+			};
+
+			rgmii2_pins: rgmii2_pins {
+				mux {
+					pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
+					       "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
+					function = "rgmii2";
+					drive-strength = <8>;
+					bias-disable;
+				};
+
+				tx {
+					pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ;
+					input-disable;
+				};
+			};
+
+			spi_pins: spi_pins {
+				mux {
+					pins = "gpio18", "gpio19", "gpio21";
+					function = "gsbi5";
+					drive-strength = <10>;
+					bias-none;
+				};
+
+				cs {
+					pins = "gpio20";
+					drive-strength = <12>;
+				};
+			};
+
+			usb0_pwr_en_pins: usb0_pwr_en_pins {
+				mux {
+					pins = "gpio16", "gpio17";
+					function = "gpio";
+					drive-strength = <12>;
+				};
+
+				pwr {
+					pins = "gpio17";
+					bias-pull-down;
+					output-high;
+				};
+
+				ovc {
+					pins = "gpio16";
+					bias-pull-up;
+				};
+			};
+
+			usb1_pwr_en_pins: usb1_pwr_en_pins {
+				mux {
+					pins = "gpio14", "gpio15";
+					function = "gpio";
+					drive-strength = <12>;
+				};
+
+				pwr {
+					pins = "gpio14";
+					bias-pull-down;
+					output-high;
+				};
+
+				ovc {
+					pins = "gpio15";
+					bias-pull-up;
+				};
+			};
+		};
+
+		gsbi@16300000 {
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+			status = "ok";
+			serial@16340000 {
+				status = "ok";
+			};
+			/*
+			 * The i2c device on gsbi4 should not be enabled.
+			 * On ipq806x designs gsbi4 i2c is meant for exclusive
+			 * RPM usage. Turning this on in kernel manifests as
+			 * i2c failure for the RPM.
+			 */
+		};
+
+		gsbi5: gsbi@1a200000 {
+			qcom,mode = <GSBI_PROT_SPI>;
+			status = "ok";
+
+			spi4: spi@1a280000 {
+				status = "ok";
+
+				pinctrl-0 = <&spi_pins>;
+				pinctrl-names = "default";
+
+				cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+				flash: m25p80@0 {
+					compatible = "jedec,spi-nor";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					spi-max-frequency = <51200000>;
+					reg = <0>;
+
+					partitions {
+						compatible = "qcom,smem";
+					};
+				};
+			};
+		};
+
+		phy@100f8800 {		/* USB3 port 1 HS phy */
+			status = "ok";
+		};
+
+		phy@100f8830 {		/* USB3 port 1 SS phy */
+			status = "ok";
+		};
+
+		phy@110f8800 {		/* USB3 port 0 HS phy */
+			status = "ok";
+		};
+
+		phy@110f8830 {		/* USB3 port 0 SS phy */
+			status = "ok";
+		};
+
+		usb30@0 {
+			status = "ok";
+
+			pinctrl-0 = <&usb0_pwr_en_pins>;
+			pinctrl-names = "default";
+		};
+
+		usb30@1 {
+			status = "ok";
+
+			pinctrl-0 = <&usb1_pwr_en_pins>;
+			pinctrl-names = "default";
+		};
+
+		pcie0: pci@1b500000 {
+			status = "ok";
+			reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
+			pinctrl-0 = <&pcie0_pins>;
+			pinctrl-names = "default";
+		};
+
+		pcie1: pci@1b700000 {
+			status = "ok";
+			reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
+			pinctrl-0 = <&pcie1_pins>;
+			pinctrl-names = "default";
+			force_gen1 = <1>;
+		};
+
+		mdio0: mdio {
+			compatible = "virtual,mdio-gpio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+			pinctrl-0 = <&mdio0_pins>;
+			pinctrl-names = "default";
+
+			phy0: ethernet-phy@0 {
+				device_type = "ethernet-phy";
+				reg = <0>;
+				qca,ar8327-initvals = <
+					0x00004 0x7600000   /* PAD0_MODE */
+					0x00008 0x1000000   /* PAD5_MODE */
+					0x0000c 0x80        /* PAD6_MODE */
+					0x000e4 0xaa545     /* MAC_POWER_SEL */
+					0x000e0 0xc74164de  /* SGMII_CTRL */
+					0x0007c 0x4e        /* PORT0_STATUS */
+					0x00094 0x4e        /* PORT6_STATUS */
+					0x00970 0x1e864443  /* QM_PORT0_CTRL0 */
+					0x00974 0x000001c6  /* QM_PORT0_CTRL1 */
+					0x00978 0x19008643  /* QM_PORT1_CTRL0 */
+					0x0097c 0x000001c6  /* QM_PORT1_CTRL1 */
+					0x00980 0x19008643  /* QM_PORT2_CTRL0 */
+					0x00984 0x000001c6  /* QM_PORT2_CTRL1 */
+					0x00988 0x19008643  /* QM_PORT3_CTRL0 */
+					0x0098c 0x000001c6  /* QM_PORT3_CTRL1 */
+					0x00990 0x19008643  /* QM_PORT4_CTRL0 */
+					0x00994 0x000001c6  /* QM_PORT4_CTRL1 */
+					0x00998 0x1e864443  /* QM_PORT5_CTRL0 */
+					0x0099c 0x000001c6  /* QM_PORT5_CTRL1 */
+					0x009a0 0x1e864443  /* QM_PORT6_CTRL0 */
+					0x009a4 0x000001c6  /* QM_PORT6_CTRL1 */
+					>;
+			};
+
+			phy4: ethernet-phy@4 {
+				device_type = "ethernet-phy";
+				reg = <4>;
+				qca,ar8327-initvals = <
+					0x000e4 0x6a545     /* MAC_POWER_SEL */
+					0x0000c 0x80        /* PAD6_MODE */
+					>;
+			};
+		};
+
+		gmac1: ethernet@37200000 {
+			status = "ok";
+			phy-mode = "rgmii";
+			qcom,id = <1>;
+			qcom,phy_mdio_addr = <4>;
+			qcom,poll_required = <0>;
+			qcom,rgmii_delay = <1>;
+			qcom,phy_mii_type = <0>;
+			qcom,emulation = <0>;
+			qcom,irq = <255>;
+			mdiobus = <&mdio0>;
+
+			pinctrl-0 = <&rgmii2_pins>;
+			pinctrl-names = "default";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		gmac2: ethernet@37400000 {
+			status = "ok";
+			phy-mode = "sgmii";
+			qcom,id = <2>;
+			qcom,phy_mdio_addr = <0>;	/* none */
+			qcom,poll_required = <0>;	/* no polling */
+			qcom,rgmii_delay = <0>;
+			qcom,phy_mii_type = <1>;
+			qcom,emulation = <0>;
+			qcom,irq = <258>;
+			mdiobus = <&mdio0>;
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		rpm@108000 {
+			pinctrl-0 = <&i2c4_pins>;
+			pinctrl-names = "default";
+		};
+
+		amba {
+			sdcc1: sdcc@12400000 {
+				status = "okay";
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		wifi {
+			label = "wifi";
+			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+			linux,input-type = <EV_SW>;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+		internet {
+			label = "nbg6817:white:internet";
+			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
+		};
+
+		power: power {
+			label = "nbg6817:white:power";
+			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+
+		wifi2g {
+			label = "nbg6817:amber:wifi2g";
+			gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* wifi2g amber from the manual is missing */
+
+		wifi5g {
+			label = "nbg6817:amber:wifi5g";
+			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* wifi5g amber from the manual is missing */
+	};
+};
+
+&adm_dma {
+	status = "ok";
+};
diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065-r7800.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
new file mode 100644
index 0000000..63cb42a
--- /dev/null
+++ b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
@@ -0,0 +1,575 @@
+#include "qcom-ipq8065-v1.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Netgear Nighthawk X4S R7800";
+	compatible = "netgear,r7800", "qcom,ipq8065", "qcom,ipq8064";
+
+	memory@0 {
+		reg = <0x42000000 0x1e000000>;
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		rsvd@41200000 {
+			reg = <0x41200000 0x300000>;
+			no-map;
+		};
+
+		rsvd@5fe00000 {
+			reg = <0x5fe00000 0x200000>;
+			reusable;
+		};
+	};
+
+	aliases {
+		serial0 = &gsbi4_serial;
+		mdio-gpio0 = &mdio0;
+
+		led-boot = &power_white;
+		led-failsafe = &power_amber;
+		led-running = &power_white;
+		led-upgrade = &power_amber;
+	};
+
+	chosen {
+		linux,stdout-path = "serial0:115200n8";
+	};
+
+	soc {
+		pinmux@800000 {
+			button_pins: button_pins {
+				mux {
+					pins = "gpio6", "gpio54", "gpio65";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			i2c4_pins: i2c4_pinmux {
+				mux {
+					pins = "gpio12", "gpio13";
+					function = "gsbi4";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
+
+			led_pins: led_pins {
+				pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
+					"gpio24","gpio26", "gpio53", "gpio64";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			nand_pins: nand_pins {
+				mux {
+					pins = "gpio34", "gpio35", "gpio36",
+					       "gpio37", "gpio38", "gpio39",
+					       "gpio40", "gpio41", "gpio42",
+					       "gpio43", "gpio44", "gpio45",
+					       "gpio46", "gpio47";
+					function = "nand";
+					drive-strength = <10>;
+					bias-disable;
+				};
+				pullups {
+					pins = "gpio39";
+					bias-pull-up;
+				};
+				hold {
+					pins = "gpio40", "gpio41", "gpio42",
+					       "gpio43", "gpio44", "gpio45",
+					       "gpio46", "gpio47";
+					bias-bus-hold;
+				};
+			};
+
+			mdio0_pins: mdio0_pins {
+				mux {
+					pins = "gpio0", "gpio1";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-disable;
+				};
+
+				clk {
+					pins = "gpio1";
+					input-disable;
+				};
+			};
+
+			rgmii2_pins: rgmii2_pins {
+				mux {
+					pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
+					       "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
+					function = "rgmii2";
+					drive-strength = <8>;
+					bias-disable;
+				};
+
+				tx {
+					pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ;
+					input-disable;
+				};
+			};
+
+			spi_pins: spi_pins {
+				mux {
+					pins = "gpio18", "gpio19", "gpio21";
+					function = "gsbi5";
+					bias-pull-down;
+				};
+
+				data {
+					pins = "gpio18", "gpio19";
+					drive-strength = <10>;
+				};
+
+				cs {
+					pins = "gpio20";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				clk {
+					pins = "gpio21";
+					drive-strength = <12>;
+				};
+			};
+
+			spi6_pins: spi6_pins {
+				mux {
+					pins = "gpio55", "gpio56", "gpio58";
+					function = "gsbi6";
+					bias-pull-down;
+				};
+
+				mosi {
+					pins = "gpio55";
+					drive-strength = <12>;
+				};
+
+				miso {
+					pins = "gpio56";
+					drive-strength = <14>;
+				};
+
+				cs {
+					pins = "gpio57";
+					drive-strength = <12>;
+					bias-pull-up;
+				};
+
+				clk {
+					pins = "gpio58";
+					drive-strength = <12>;
+				};
+
+				reset {
+					pins = "gpio33";
+					drive-strength = <10>;
+					bias-pull-down;
+					output-high;
+				};
+			};
+
+			usb0_pwr_en_pins: usb0_pwr_en_pins {
+				mux {
+					pins = "gpio15";
+					function = "gpio";
+					drive-strength = <12>;
+					bias-pull-down;
+					output-high;
+				};
+			};
+
+			usb1_pwr_en_pins: usb1_pwr_en_pins {
+				mux {
+					pins = "gpio16", "gpio68";
+					function = "gpio";
+					drive-strength = <12>;
+					bias-pull-down;
+					output-high;
+				};
+			};
+		};
+
+		gsbi@16300000 {
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+			status = "ok";
+			serial@16340000 {
+				status = "ok";
+			};
+			/*
+			 * The i2c device on gsbi4 should not be enabled.
+			 * On ipq806x designs gsbi4 i2c is meant for exclusive
+			 * RPM usage. Turning this on in kernel manifests as
+			 * i2c failure for the RPM.
+			 */
+		};
+
+		gsbi5: gsbi@1a200000 {
+			qcom,mode = <GSBI_PROT_SPI>;
+			status = "ok";
+
+			spi5: spi@1a280000 {
+				status = "ok";
+
+				pinctrl-0 = <&spi_pins>;
+				pinctrl-names = "default";
+
+				cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+				flash: m25p80@0 {
+					compatible = "jedec,spi-nor";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+
+					partitions {
+						compatible = "qcom,smem";
+					};
+				};
+			};
+		};
+
+		gsbi6: gsbi@16500000 {
+			qcom,mode = <GSBI_PROT_SPI>;
+			status = "ok";
+			spi6: spi@16580000 {
+				status = "ok";
+
+				pinctrl-0 = <&spi6_pins>;
+				pinctrl-names = "default";
+
+				cs-gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>;
+
+				spi-nor@0 {
+					compatible = "jedec,spi-nor";
+					reg = <0>;
+					spi-max-frequency = <6000000>;
+				};
+			};
+		};
+
+		sata-phy@1b400000 {
+			status = "ok";
+		};
+
+		sata@29000000 {
+			ports-implemented = <0x1>;
+			status = "ok";
+		};
+
+		phy@100f8800 {		/* USB3 port 1 HS phy */
+			status = "ok";
+		};
+
+		phy@100f8830 {		/* USB3 port 1 SS phy */
+			status = "ok";
+		};
+
+		phy@110f8800 {		/* USB3 port 0 HS phy */
+			status = "ok";
+		};
+
+		phy@110f8830 {		/* USB3 port 0 SS phy */
+			status = "ok";
+		};
+
+		usb30@0 {
+			status = "ok";
+
+			pinctrl-0 = <&usb0_pwr_en_pins>;
+			pinctrl-names = "default";
+		};
+
+		usb30@1 {
+			status = "ok";
+
+			pinctrl-0 = <&usb1_pwr_en_pins>;
+			pinctrl-names = "default";
+		};
+
+		pcie0: pci@1b500000 {
+			status = "ok";
+		};
+
+		pcie1: pci@1b700000 {
+			status = "ok";
+			force_gen1 = <1>;
+		};
+
+		nand@1ac00000 {
+			status = "ok";
+
+			pinctrl-0 = <&nand_pins>;
+			pinctrl-names = "default";
+
+			cs0 {
+				reg = <0>;
+				compatible = "qcom,nandcs";
+
+				nand-ecc-strength = <4>;
+				nand-bus-width = <8>;
+				nand-ecc-step-size = <512>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					qcadata@0 {
+						label = "qcadata";
+						reg = <0x0000000 0x0c80000>;
+						read-only;
+					};
+
+					APPSBL@c80000 {
+						label = "APPSBL";
+						reg = <0x0c80000 0x0500000>;
+						read-only;
+					};
+
+					APPSBLENV@1180000 {
+						label = "APPSBLENV";
+						reg = <0x1180000 0x0080000>;
+						read-only;
+					};
+
+					art: art@1200000 {
+						label = "art";
+						reg = <0x1200000 0x0140000>;
+						read-only;
+					};
+
+					artbak: art@1340000 {
+						label = "artbak";
+						reg = <0x1340000 0x0140000>;
+						read-only;
+					};
+
+					kernel@1480000 {
+						label = "kernel";
+						reg = <0x1480000 0x0200000>;
+					};
+
+					ubi@1680000 {
+						label = "ubi";
+						reg = <0x1680000 0x1E00000>;
+					};
+
+					netgear@3480000 {
+						label = "netgear";
+						reg = <0x3480000 0x4480000>;
+						read-only;
+					};
+
+					reserve@7900000 {
+						label = "reserve";
+						reg = <0x7900000 0x0700000>;
+						read-only;
+					};
+
+					firmware@1480000 {
+						label = "firmware";
+						reg = <0x1480000 0x2000000>;
+					};
+				};
+			};
+		};
+
+		mdio0: mdio {
+			compatible = "virtual,mdio-gpio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+			pinctrl-0 = <&mdio0_pins>;
+			pinctrl-names = "default";
+
+
+			phy0: ethernet-phy@0 {
+				device_type = "ethernet-phy";
+				reg = <0>;
+				qca,ar8327-initvals = <
+					0x00004 0x7600000   /* PAD0_MODE */
+					0x00008 0x1000000   /* PAD5_MODE */
+					0x0000c 0x80        /* PAD6_MODE */
+					0x000e4 0xaa545     /* MAC_POWER_SEL */
+					0x000e0 0xc74164de  /* SGMII_CTRL */
+					0x0007c 0x4e        /* PORT0_STATUS */
+					0x00094 0x4e        /* PORT6_STATUS */
+					0x00970 0x1e864443  /* QM_PORT0_CTRL0 */
+					0x00974 0x000001c6  /* QM_PORT0_CTRL1 */
+					0x00978 0x19008643  /* QM_PORT1_CTRL0 */
+					0x0097c 0x000001c6  /* QM_PORT1_CTRL1 */
+					0x00980 0x19008643  /* QM_PORT2_CTRL0 */
+					0x00984 0x000001c6  /* QM_PORT2_CTRL1 */
+					0x00988 0x19008643  /* QM_PORT3_CTRL0 */
+					0x0098c 0x000001c6  /* QM_PORT3_CTRL1 */
+					0x00990 0x19008643  /* QM_PORT4_CTRL0 */
+					0x00994 0x000001c6  /* QM_PORT4_CTRL1 */
+					0x00998 0x1e864443  /* QM_PORT5_CTRL0 */
+					0x0099c 0x000001c6  /* QM_PORT5_CTRL1 */
+					0x009a0 0x1e864443  /* QM_PORT6_CTRL0 */
+					0x009a4 0x000001c6  /* QM_PORT6_CTRL1 */
+					>;
+				qca,ar8327-vlans = <
+					0x1	0x5e	    /* VLAN1 Ports 1/2/3/4/6 */
+					0x2	0x21	    /* VLAN2 Ports 0/5 */
+				>;
+			};
+
+			phy4: ethernet-phy@4 {
+				device_type = "ethernet-phy";
+				reg = <4>;
+				qca,ar8327-initvals = <
+					0x000e4 0x6a545     /* MAC_POWER_SEL */
+					0x0000c 0x80        /* PAD6_MODE */
+					>;
+			};
+		};
+
+		gmac1: ethernet@37200000 {
+			status = "ok";
+			phy-mode = "rgmii";
+			qcom,id = <1>;
+			qcom,phy_mdio_addr = <4>;
+			qcom,poll_required = <0>;
+			qcom,rgmii_delay = <1>;
+			qcom,phy_mii_type = <0>;
+			qcom,emulation = <0>;
+			qcom,irq = <255>;
+			mdiobus = <&mdio0>;
+
+			pinctrl-0 = <&rgmii2_pins>;
+			pinctrl-names = "default";
+
+			mtd-mac-address = <&art 6>;
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		gmac2: ethernet@37400000 {
+			status = "ok";
+			phy-mode = "sgmii";
+			qcom,id = <2>;
+			qcom,phy_mdio_addr = <0>;	/* none */
+			qcom,poll_required = <0>;	/* no polling */
+			qcom,rgmii_delay = <0>;
+			qcom,phy_mii_type = <1>;
+			qcom,emulation = <0>;
+			qcom,irq = <258>;
+			mdiobus = <&mdio0>;
+
+			mtd-mac-address = <&art 0>;
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		rpm@108000 {
+			pinctrl-0 = <&i2c4_pins>;
+			pinctrl-names = "default";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		wifi {
+			label = "wifi";
+			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+		power_white: power_white {
+			label = "r7800:white:power";
+			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+
+		power_amber: power_amber {
+			label = "r7800:amber:power";
+			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		wan_white {
+			label = "r7800:white:wan";
+			gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		wan_amber {
+			label = "r7800:amber:wan";
+			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb1 {
+			label = "r7800:white:usb1";
+			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb2 {
+			label = "r7800:white:usb2";
+			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		esata {
+			label = "r7800:white:esata";
+			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+		};
+
+		wifi {
+			label = "r7800:white:wifi";
+			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
+		};
+
+		wps {
+			label = "r7800:white:wps";
+			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&adm_dma {
+	status = "ok";
+};
diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065-v1.0.dtsi b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065-v1.0.dtsi
new file mode 100644
index 0000000..22b5338
--- /dev/null
+++ b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065-v1.0.dtsi
@@ -0,0 +1 @@
+#include "qcom-ipq8065.dtsi"
diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065.dtsi b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065.dtsi
new file mode 100644
index 0000000..15f3b95
--- /dev/null
+++ b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065.dtsi
@@ -0,0 +1,164 @@
+#include "qcom-ipq8064.dtsi"
+
+/ {
+	model = "Qualcomm IPQ8065";
+	compatible = "qcom,ipq8065", "qcom,ipq8064";
+
+	qcom,pvs {
+		qcom,pvs-format-a;
+		qcom,speed0-pvs0-bin-v0 =
+			< 1725000000 1262500 >,
+			< 1400000000 1175000 >,
+			< 1000000000 1100000 >,
+			 < 800000000 1050000 >,
+			 < 600000000 1000000 >,
+			 < 384000000 975000 >;
+		qcom,speed0-pvs1-bin-v0 =
+			< 1725000000 1225000 >,
+			< 1400000000 1150000 >,
+			< 1000000000 1075000 >,
+			 < 800000000 1025000 >,
+			 < 600000000 975000 >,
+			 < 384000000 950000 >;
+		qcom,speed0-pvs2-bin-v0 =
+			< 1725000000 1200000 >,
+			< 1400000000 1125000 >,
+			< 1000000000 1050000 >,
+			 < 800000000 1000000 >,
+			 < 600000000 950000 >,
+			 < 384000000 925000 >;
+		qcom,speed0-pvs3-bin-v0 =
+			< 1725000000 1175000 >,
+			< 1400000000 1100000 >,
+			< 1000000000 1025000 >,
+			 < 800000000 975000 >,
+			 < 600000000 925000 >,
+			 < 384000000 900000 >;
+		qcom,speed0-pvs4-bin-v0 =
+			< 1725000000 1150000 >,
+			< 1400000000 1075000 >,
+			< 1000000000 1000000 >,
+			 < 800000000 950000 >,
+			 < 600000000 900000 >,
+			 < 384000000 875000 >;
+		qcom,speed0-pvs5-bin-v0 =
+			< 1725000000 1100000 >,
+			< 1400000000 1025000 >,
+			< 1000000000 950000 >,
+			 < 800000000 900000 >,
+			 < 600000000 850000 >,
+			 < 384000000 825000 >;
+		qcom,speed0-pvs6-bin-v0 =
+			< 1725000000 1050000 >,
+			< 1400000000 975000 >,
+			< 1000000000 900000 >,
+			 < 800000000 850000 >,
+			 < 600000000 800000 >,
+			 < 384000000 775000 >;
+	};
+
+	soc: soc {
+
+		rpm@108000 {
+
+			regulators {
+
+				smb208_s2a: s2a {
+					regulator-min-microvolt = <775000>;
+					regulator-max-microvolt = <1275000>;
+				};
+
+				smb208_s2b: s2b {
+					regulator-min-microvolt = <775000>;
+					regulator-max-microvolt = <1275000>;
+				};
+			};
+		};
+
+		ss_phy_0: phy@110f8830 {
+			rx_eq = <2>;
+			tx_deamp_3_5db = <32>;
+			mpll = <0xa0>;
+		};
+		ss_phy_1: phy@100f8830 {
+			rx_eq = <2>;
+			tx_deamp_3_5db = <32>;
+			mpll = <0xa0>;
+		};
+
+		/* Temporary fixed regulator */
+		vsdcc_fixed: vsdcc-regulator {
+			compatible = "regulator-fixed";
+			regulator-name = "SDCC Power";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		sdcc1bam:dma@12402000 {
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12402000 0x8000>;
+			interrupts = <0 98 0>;
+			clocks = <&gcc SDC1_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+                };
+
+		sdcc3bam:dma@12182000 {
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12182000 0x8000>;
+			interrupts = <0 96 0>;
+			clocks = <&gcc SDC3_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		amba {
+			compatible = "arm,amba-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			sdcc1: sdcc@12400000 {
+				status          = "disabled";
+				compatible      = "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				reg             = <0x12400000 0x2000>;
+				interrupts      = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "cmd_irq";
+				clocks          = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+				clock-names     = "mclk", "apb_pclk";
+				bus-width       = <8>;
+				max-frequency   = <96000000>;
+				non-removable;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				vmmc-supply = <&vsdcc_fixed>;
+				dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
+				dma-names = "tx", "rx";
+			};
+
+			sdcc3: sdcc@12180000 {
+				compatible      = "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				status          = "disabled";
+				reg             = <0x12180000 0x2000>;
+				interrupts      = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "cmd_irq";
+				clocks          = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+				clock-names     = "mclk", "apb_pclk";
+				bus-width       = <8>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				max-frequency   = <192000000>;
+				#mmc-ddr-1_8v;
+				sd-uhs-sdr104;
+				sd-uhs-ddr50;
+				vqmmc-supply = <&vsdcc_fixed>;
+				dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
+				dma-names = "tx", "rx";
+			};
+		};
+	};
+};
diff --git a/target/linux/ipq806x/patches-4.14/0001-dtbindings-qcom_adm-Fix-channel-specifiers.patch b/target/linux/ipq806x/patches-4.14/0001-dtbindings-qcom_adm-Fix-channel-specifiers.patch
new file mode 100644
index 0000000..83d7bbc
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0001-dtbindings-qcom_adm-Fix-channel-specifiers.patch
@@ -0,0 +1,71 @@
+From 28d0ed88f536dd639adf1b0c7c08e04be3c8f294 Mon Sep 17 00:00:00 2001
+From: Thomas Pedersen <twp@codeaurora.org>
+Date: Mon, 16 May 2016 17:58:50 -0700
+Subject: [PATCH 01/69] dtbindings: qcom_adm: Fix channel specifiers
+
+Original patch from Andy Gross.
+
+This patch removes the crci information from the dma
+channel property.  At least one client device requires
+using more than one CRCI value for a channel.  This does
+not match the current binding and the crci information
+needs to be removed.
+
+Instead, the client device will provide this information
+via other means.
+
+Signed-off-by: Andy Gross <agross@codeaurora.org>
+Signed-off-by: Thomas Pedersen <twp@codeaurora.org>
+---
+ Documentation/devicetree/bindings/dma/qcom_adm.txt | 16 ++++++----------
+ 1 file changed, 6 insertions(+), 10 deletions(-)
+
+--- a/Documentation/devicetree/bindings/dma/qcom_adm.txt
++++ b/Documentation/devicetree/bindings/dma/qcom_adm.txt
+@@ -4,8 +4,7 @@ Required properties:
+ - compatible: must contain "qcom,adm" for IPQ/APQ8064 and MSM8960
+ - reg: Address range for DMA registers
+ - interrupts: Should contain one interrupt shared by all channels
+-- #dma-cells: must be <2>.  First cell denotes the channel number.  Second cell
+-  denotes CRCI (client rate control interface) flow control assignment.
++- #dma-cells: must be <1>.  First cell denotes the channel number.
+ - clocks: Should contain the core clock and interface clock.
+ - clock-names: Must contain "core" for the core clock and "iface" for the
+   interface clock.
+@@ -22,7 +21,7 @@ Example:
+ 			compatible = "qcom,adm";
+ 			reg = <0x18300000 0x100000>;
+ 			interrupts = <0 170 0>;
+-			#dma-cells = <2>;
++			#dma-cells = <1>;
+ 
+ 			clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
+ 			clock-names = "core", "iface";
+@@ -35,15 +34,12 @@ Example:
+ 			qcom,ee = <0>;
+ 		};
+ 
+-DMA clients must use the format descripted in the dma.txt file, using a three
++DMA clients must use the format descripted in the dma.txt file, using a two
+ cell specifier for each channel.
+ 
+-Each dmas request consists of 3 cells:
++Each dmas request consists of two cells:
+  1. phandle pointing to the DMA controller
+  2. channel number
+- 3. CRCI assignment, if applicable.  If no CRCI flow control is required, use 0.
+-    The CRCI is used for flow control.  It identifies the peripheral device that
+-    is the source/destination for the transferred data.
+ 
+ Example:
+ 
+@@ -55,7 +51,7 @@ Example:
+ 
+ 		cs-gpios = <&qcom_pinmux 20 0>;
+ 
+-		dmas = <&adm_dma 6 9>,
+-			<&adm_dma 5 10>;
++		dmas = <&adm_dma 6>,
++			<&adm_dma 5>;
+ 		dma-names = "rx", "tx";
+ 	};
diff --git a/target/linux/ipq806x/patches-4.14/0002-dmaengine-Add-ADM-driver.patch b/target/linux/ipq806x/patches-4.14/0002-dmaengine-Add-ADM-driver.patch
new file mode 100644
index 0000000..fedb8ed
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0002-dmaengine-Add-ADM-driver.patch
@@ -0,0 +1,966 @@
+From 563fa24db4e529c5a3311928d73a8a90531ee527 Mon Sep 17 00:00:00 2001
+From: Thomas Pedersen <twp@codeaurora.org>
+Date: Mon, 16 May 2016 17:58:51 -0700
+Subject: [PATCH 02/69] dmaengine: Add ADM driver
+
+Original patch by Andy Gross.
+
+Add the DMA engine driver for the QCOM Application Data Mover (ADM) DMA
+controller found in the MSM8x60 and IPQ/APQ8064 platforms.
+
+The ADM supports both memory to memory transactions and memory
+to/from peripheral device transactions.  The controller also provides flow
+control capabilities for transactions to/from peripheral devices.
+
+The initial release of this driver supports slave transfers to/from peripherals
+and also incorporates CRCI (client rate control interface) flow control.
+
+Signed-off-by: Andy Gross <agross@codeaurora.org>
+Signed-off-by: Thomas Pedersen <twp@codeaurora.org>
+---
+ drivers/dma/qcom/Kconfig    |  10 +
+ drivers/dma/qcom/Makefile   |   1 +
+ drivers/dma/qcom/qcom_adm.c | 900 ++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 911 insertions(+)
+ create mode 100644 drivers/dma/qcom/qcom_adm.c
+
+--- a/drivers/dma/qcom/Kconfig
++++ b/drivers/dma/qcom/Kconfig
+@@ -27,3 +27,13 @@ config QCOM_HIDMA
+ 	  (user to kernel, kernel to kernel, etc.).  It only supports
+ 	  memcpy interface. The core is not intended for general
+ 	  purpose slave DMA.
++
++config QCOM_ADM
++	tristate "Qualcomm ADM support"
++	depends on ARCH_QCOM || (COMPILE_TEST && OF && ARM)
++	select DMA_ENGINE
++	select DMA_VIRTUAL_CHANNELS
++	---help---
++	  Enable support for the Qualcomm ADM DMA controller.  This controller
++	  provides DMA capabilities for both general purpose and on-chip
++	  peripheral devices.
+--- a/drivers/dma/qcom/Makefile
++++ b/drivers/dma/qcom/Makefile
+@@ -4,3 +4,4 @@ obj-$(CONFIG_QCOM_HIDMA_MGMT) += hdma_mg
+ hdma_mgmt-objs	 := hidma_mgmt.o hidma_mgmt_sys.o
+ obj-$(CONFIG_QCOM_HIDMA) +=  hdma.o
+ hdma-objs        := hidma_ll.o hidma.o hidma_dbg.o
++obj-$(CONFIG_QCOM_ADM) += qcom_adm.o
+--- /dev/null
++++ b/drivers/dma/qcom/qcom_adm.c
+@@ -0,0 +1,914 @@
++/*
++ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/io.h>
++#include <linux/init.h>
++#include <linux/slab.h>
++#include <linux/module.h>
++#include <linux/interrupt.h>
++#include <linux/dma-mapping.h>
++#include <linux/scatterlist.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/of.h>
++#include <linux/of_address.h>
++#include <linux/of_irq.h>
++#include <linux/of_dma.h>
++#include <linux/reset.h>
++#include <linux/clk.h>
++#include <linux/dmaengine.h>
++
++#include "../dmaengine.h"
++#include "../virt-dma.h"
++
++/* ADM registers - calculated from channel number and security domain */
++#define ADM_CHAN_MULTI			0x4
++#define ADM_CI_MULTI			0x4
++#define ADM_CRCI_MULTI			0x4
++#define ADM_EE_MULTI			0x800
++#define ADM_CHAN_OFFS(chan)		(ADM_CHAN_MULTI * chan)
++#define ADM_EE_OFFS(ee)			(ADM_EE_MULTI * ee)
++#define ADM_CHAN_EE_OFFS(chan, ee)	(ADM_CHAN_OFFS(chan) + ADM_EE_OFFS(ee))
++#define ADM_CHAN_OFFS(chan)		(ADM_CHAN_MULTI * chan)
++#define ADM_CI_OFFS(ci)			(ADM_CHAN_OFF(ci))
++#define ADM_CH_CMD_PTR(chan, ee)	(ADM_CHAN_EE_OFFS(chan, ee))
++#define ADM_CH_RSLT(chan, ee)		(0x40 + ADM_CHAN_EE_OFFS(chan, ee))
++#define ADM_CH_FLUSH_STATE0(chan, ee)	(0x80 + ADM_CHAN_EE_OFFS(chan, ee))
++#define ADM_CH_STATUS_SD(chan, ee)	(0x200 + ADM_CHAN_EE_OFFS(chan, ee))
++#define ADM_CH_CONF(chan)		(0x240 + ADM_CHAN_OFFS(chan))
++#define ADM_CH_RSLT_CONF(chan, ee)	(0x300 + ADM_CHAN_EE_OFFS(chan, ee))
++#define ADM_SEC_DOMAIN_IRQ_STATUS(ee)	(0x380 + ADM_EE_OFFS(ee))
++#define ADM_CI_CONF(ci)			(0x390 + ci * ADM_CI_MULTI)
++#define ADM_GP_CTL			0x3d8
++#define ADM_CRCI_CTL(crci, ee)		(0x400 + crci * ADM_CRCI_MULTI + \
++						ADM_EE_OFFS(ee))
++
++/* channel status */
++#define ADM_CH_STATUS_VALID	BIT(1)
++
++/* channel result */
++#define ADM_CH_RSLT_VALID	BIT(31)
++#define ADM_CH_RSLT_ERR		BIT(3)
++#define ADM_CH_RSLT_FLUSH	BIT(2)
++#define ADM_CH_RSLT_TPD		BIT(1)
++
++/* channel conf */
++#define ADM_CH_CONF_SHADOW_EN		BIT(12)
++#define ADM_CH_CONF_MPU_DISABLE		BIT(11)
++#define ADM_CH_CONF_PERM_MPU_CONF	BIT(9)
++#define ADM_CH_CONF_FORCE_RSLT_EN	BIT(7)
++#define ADM_CH_CONF_SEC_DOMAIN(ee)	(((ee & 0x3) << 4) | ((ee & 0x4) << 11))
++
++/* channel result conf */
++#define ADM_CH_RSLT_CONF_FLUSH_EN	BIT(1)
++#define ADM_CH_RSLT_CONF_IRQ_EN		BIT(0)
++
++/* CRCI CTL */
++#define ADM_CRCI_CTL_MUX_SEL	BIT(18)
++#define ADM_CRCI_CTL_RST	BIT(17)
++
++/* CI configuration */
++#define ADM_CI_RANGE_END(x)	(x << 24)
++#define ADM_CI_RANGE_START(x)	(x << 16)
++#define ADM_CI_BURST_4_WORDS	BIT(2)
++#define ADM_CI_BURST_8_WORDS	BIT(3)
++
++/* GP CTL */
++#define ADM_GP_CTL_LP_EN	BIT(12)
++#define ADM_GP_CTL_LP_CNT(x)	(x << 8)
++
++/* Command pointer list entry */
++#define ADM_CPLE_LP		BIT(31)
++#define ADM_CPLE_CMD_PTR_LIST	BIT(29)
++
++/* Command list entry */
++#define ADM_CMD_LC		BIT(31)
++#define ADM_CMD_DST_CRCI(n)	(((n) & 0xf) << 7)
++#define ADM_CMD_SRC_CRCI(n)	(((n) & 0xf) << 3)
++
++#define ADM_CMD_TYPE_SINGLE	0x0
++#define ADM_CMD_TYPE_BOX	0x3
++
++#define ADM_CRCI_MUX_SEL	BIT(4)
++#define ADM_DESC_ALIGN		8
++#define ADM_MAX_XFER		(SZ_64K-1)
++#define ADM_MAX_ROWS		(SZ_64K-1)
++#define ADM_MAX_CHANNELS	16
++
++struct adm_desc_hw_box {
++	u32 cmd;
++	u32 src_addr;
++	u32 dst_addr;
++	u32 row_len;
++	u32 num_rows;
++	u32 row_offset;
++};
++
++struct adm_desc_hw_single {
++	u32 cmd;
++	u32 src_addr;
++	u32 dst_addr;
++	u32 len;
++};
++
++struct adm_async_desc {
++	struct virt_dma_desc vd;
++	struct adm_device *adev;
++
++	size_t length;
++	enum dma_transfer_direction dir;
++	dma_addr_t dma_addr;
++	size_t dma_len;
++
++	void *cpl;
++	dma_addr_t cp_addr;
++	u32 crci;
++	u32 mux;
++	u32 blk_size;
++};
++
++struct adm_chan {
++	struct virt_dma_chan vc;
++	struct adm_device *adev;
++
++	/* parsed from DT */
++	u32 id;			/* channel id */
++
++	struct adm_async_desc *curr_txd;
++	struct dma_slave_config slave;
++	struct list_head node;
++
++	int error;
++	int initialized;
++};
++
++static inline struct adm_chan *to_adm_chan(struct dma_chan *common)
++{
++	return container_of(common, struct adm_chan, vc.chan);
++}
++
++struct adm_device {
++	void __iomem *regs;
++	struct device *dev;
++	struct dma_device common;
++	struct device_dma_parameters dma_parms;
++	struct adm_chan *channels;
++
++	u32 ee;
++
++	struct clk *core_clk;
++	struct clk *iface_clk;
++
++	struct reset_control *clk_reset;
++	struct reset_control *c0_reset;
++	struct reset_control *c1_reset;
++	struct reset_control *c2_reset;
++	int irq;
++};
++
++/**
++ * adm_free_chan - Frees dma resources associated with the specific channel
++ *
++ * Free all allocated descriptors associated with this channel
++ *
++ */
++static void adm_free_chan(struct dma_chan *chan)
++{
++	/* free all queued descriptors */
++	vchan_free_chan_resources(to_virt_chan(chan));
++}
++
++/**
++ * adm_get_blksize - Get block size from burst value
++ *
++ */
++static int adm_get_blksize(unsigned int burst)
++{
++	int ret;
++
++	switch (burst) {
++	case 16:
++	case 32:
++	case 64:
++	case 128:
++		ret = ffs(burst>>4) - 1;
++		break;
++	case 192:
++		ret = 4;
++		break;
++	case 256:
++		ret = 5;
++		break;
++	default:
++		ret = -EINVAL;
++		break;
++	}
++
++	return ret;
++}
++
++/**
++ * adm_process_fc_descriptors - Process descriptors for flow controlled xfers
++ *
++ * @achan: ADM channel
++ * @desc: Descriptor memory pointer
++ * @sg: Scatterlist entry
++ * @crci: CRCI value
++ * @burst: Burst size of transaction
++ * @direction: DMA transfer direction
++ */
++static void *adm_process_fc_descriptors(struct adm_chan *achan,
++	void *desc, struct scatterlist *sg, u32 crci, u32 burst,
++	enum dma_transfer_direction direction)
++{
++	struct adm_desc_hw_box *box_desc = NULL;
++	struct adm_desc_hw_single *single_desc;
++	u32 remainder = sg_dma_len(sg);
++	u32 rows, row_offset, crci_cmd;
++	u32 mem_addr = sg_dma_address(sg);
++	u32 *incr_addr = &mem_addr;
++	u32 *src, *dst;
++
++	if (direction == DMA_DEV_TO_MEM) {
++		crci_cmd = ADM_CMD_SRC_CRCI(crci);
++		row_offset = burst;
++		src = &achan->slave.src_addr;
++		dst = &mem_addr;
++	} else {
++		crci_cmd = ADM_CMD_DST_CRCI(crci);
++		row_offset = burst << 16;
++		src = &mem_addr;
++		dst = &achan->slave.dst_addr;
++	}
++
++	while (remainder >= burst) {
++		box_desc = desc;
++		box_desc->cmd = ADM_CMD_TYPE_BOX | crci_cmd;
++		box_desc->row_offset = row_offset;
++		box_desc->src_addr = *src;
++		box_desc->dst_addr = *dst;
++
++		rows = remainder / burst;
++		rows = min_t(u32, rows, ADM_MAX_ROWS);
++		box_desc->num_rows = rows << 16 | rows;
++		box_desc->row_len = burst << 16 | burst;
++
++		*incr_addr += burst * rows;
++		remainder -= burst * rows;
++		desc += sizeof(*box_desc);
++	}
++
++	/* if leftover bytes, do one single descriptor */
++	if (remainder) {
++		single_desc = desc;
++		single_desc->cmd = ADM_CMD_TYPE_SINGLE | crci_cmd;
++		single_desc->len = remainder;
++		single_desc->src_addr = *src;
++		single_desc->dst_addr = *dst;
++		desc += sizeof(*single_desc);
++
++		if (sg_is_last(sg))
++			single_desc->cmd |= ADM_CMD_LC;
++	} else {
++		if (box_desc && sg_is_last(sg))
++			box_desc->cmd |= ADM_CMD_LC;
++	}
++
++	return desc;
++}
++
++/**
++ * adm_process_non_fc_descriptors - Process descriptors for non-fc xfers
++ *
++ * @achan: ADM channel
++ * @desc: Descriptor memory pointer
++ * @sg: Scatterlist entry
++ * @direction: DMA transfer direction
++ */
++static void *adm_process_non_fc_descriptors(struct adm_chan *achan,
++	void *desc, struct scatterlist *sg,
++	enum dma_transfer_direction direction)
++{
++	struct adm_desc_hw_single *single_desc;
++	u32 remainder = sg_dma_len(sg);
++	u32 mem_addr = sg_dma_address(sg);
++	u32 *incr_addr = &mem_addr;
++	u32 *src, *dst;
++
++	if (direction == DMA_DEV_TO_MEM) {
++		src = &achan->slave.src_addr;
++		dst = &mem_addr;
++	} else {
++		src = &mem_addr;
++		dst = &achan->slave.dst_addr;
++	}
++
++	do {
++		single_desc = desc;
++		single_desc->cmd = ADM_CMD_TYPE_SINGLE;
++		single_desc->src_addr = *src;
++		single_desc->dst_addr = *dst;
++		single_desc->len = (remainder > ADM_MAX_XFER) ?
++				ADM_MAX_XFER : remainder;
++
++		remainder -= single_desc->len;
++		*incr_addr += single_desc->len;
++		desc += sizeof(*single_desc);
++	} while (remainder);
++
++	/* set last command if this is the end of the whole transaction */
++	if (sg_is_last(sg))
++		single_desc->cmd |= ADM_CMD_LC;
++
++	return desc;
++}
++
++/**
++ * adm_prep_slave_sg - Prep slave sg transaction
++ *
++ * @chan: dma channel
++ * @sgl: scatter gather list
++ * @sg_len: length of sg
++ * @direction: DMA transfer direction
++ * @flags: DMA flags
++ * @context: transfer context (unused)
++ */
++static struct dma_async_tx_descriptor *adm_prep_slave_sg(struct dma_chan *chan,
++	struct scatterlist *sgl, unsigned int sg_len,
++	enum dma_transfer_direction direction, unsigned long flags,
++	void *context)
++{
++	struct adm_chan *achan = to_adm_chan(chan);
++	struct adm_device *adev = achan->adev;
++	struct adm_async_desc *async_desc;
++	struct scatterlist *sg;
++	dma_addr_t cple_addr;
++	u32 i, burst;
++	u32 single_count = 0, box_count = 0, crci = 0;
++	void *desc;
++	u32 *cple;
++	int blk_size = 0;
++
++	if (!is_slave_direction(direction)) {
++		dev_err(adev->dev, "invalid dma direction\n");
++		return NULL;
++	}
++
++	/*
++	 * get burst value from slave configuration
++	 */
++	burst = (direction == DMA_MEM_TO_DEV) ?
++		achan->slave.dst_maxburst :
++		achan->slave.src_maxburst;
++
++	/* if using flow control, validate burst and crci values */
++	if (achan->slave.device_fc) {
++
++		blk_size = adm_get_blksize(burst);
++		if (blk_size < 0) {
++			dev_err(adev->dev, "invalid burst value: %d\n",
++				burst);
++			return ERR_PTR(-EINVAL);
++		}
++
++		crci = achan->slave.slave_id & 0xf;
++		if (!crci || achan->slave.slave_id > 0x1f) {
++			dev_err(adev->dev, "invalid crci value\n");
++			return ERR_PTR(-EINVAL);
++		}
++	}
++
++	/* iterate through sgs and compute allocation size of structures */
++	for_each_sg(sgl, sg, sg_len, i) {
++		if (achan->slave.device_fc) {
++			box_count += DIV_ROUND_UP(sg_dma_len(sg) / burst,
++						  ADM_MAX_ROWS);
++			if (sg_dma_len(sg) % burst)
++				single_count++;
++		} else {
++			single_count += DIV_ROUND_UP(sg_dma_len(sg),
++						     ADM_MAX_XFER);
++		}
++	}
++
++	async_desc = kzalloc(sizeof(*async_desc), GFP_ATOMIC);
++	if (!async_desc)
++		return ERR_PTR(-ENOMEM);
++
++	if (crci)
++		async_desc->mux = achan->slave.slave_id & ADM_CRCI_MUX_SEL ?
++					ADM_CRCI_CTL_MUX_SEL : 0;
++	async_desc->crci = crci;
++	async_desc->blk_size = blk_size;
++	async_desc->dma_len = single_count * sizeof(struct adm_desc_hw_single) +
++				box_count * sizeof(struct adm_desc_hw_box) +
++				sizeof(*cple) + 2 * ADM_DESC_ALIGN;
++
++	async_desc->cpl = kzalloc(async_desc->dma_len, GFP_ATOMIC);
++	if (!async_desc->cpl)
++		goto free;
++
++	async_desc->adev = adev;
++
++	/* both command list entry and descriptors must be 8 byte aligned */
++	cple = PTR_ALIGN(async_desc->cpl, ADM_DESC_ALIGN);
++	desc = PTR_ALIGN(cple + 1, ADM_DESC_ALIGN);
++
++	for_each_sg(sgl, sg, sg_len, i) {
++		async_desc->length += sg_dma_len(sg);
++
++		if (achan->slave.device_fc)
++			desc = adm_process_fc_descriptors(achan, desc, sg, crci,
++							burst, direction);
++		else
++			desc = adm_process_non_fc_descriptors(achan, desc, sg,
++							   direction);
++	}
++
++	async_desc->dma_addr = dma_map_single(adev->dev, async_desc->cpl,
++					      async_desc->dma_len,
++					      DMA_TO_DEVICE);
++	if (dma_mapping_error(adev->dev, async_desc->dma_addr))
++		goto free;
++
++	cple_addr = async_desc->dma_addr + ((void *)cple - async_desc->cpl);
++
++	/* init cmd list */
++	dma_sync_single_for_cpu(adev->dev, cple_addr, sizeof(*cple),
++				DMA_TO_DEVICE);
++	*cple = ADM_CPLE_LP;
++	*cple |= (async_desc->dma_addr + ADM_DESC_ALIGN) >> 3;
++	dma_sync_single_for_device(adev->dev, cple_addr, sizeof(*cple),
++				   DMA_TO_DEVICE);
++
++	return vchan_tx_prep(&achan->vc, &async_desc->vd, flags);
++
++free:
++	kfree(async_desc);
++	return ERR_PTR(-ENOMEM);
++}
++
++/**
++ * adm_terminate_all - terminate all transactions on a channel
++ * @achan: adm dma channel
++ *
++ * Dequeues and frees all transactions, aborts current transaction
++ * No callbacks are done
++ *
++ */
++static int adm_terminate_all(struct dma_chan *chan)
++{
++	struct adm_chan *achan = to_adm_chan(chan);
++	struct adm_device *adev = achan->adev;
++	unsigned long flags;
++	LIST_HEAD(head);
++
++	spin_lock_irqsave(&achan->vc.lock, flags);
++	vchan_get_all_descriptors(&achan->vc, &head);
++
++	/* send flush command to terminate current transaction */
++	writel_relaxed(0x0,
++		adev->regs + ADM_CH_FLUSH_STATE0(achan->id, adev->ee));
++
++	spin_unlock_irqrestore(&achan->vc.lock, flags);
++
++	vchan_dma_desc_free_list(&achan->vc, &head);
++
++	return 0;
++}
++
++static int adm_slave_config(struct dma_chan *chan, struct dma_slave_config *cfg)
++{
++	struct adm_chan *achan = to_adm_chan(chan);
++	unsigned long flag;
++
++	spin_lock_irqsave(&achan->vc.lock, flag);
++	memcpy(&achan->slave, cfg, sizeof(struct dma_slave_config));
++	spin_unlock_irqrestore(&achan->vc.lock, flag);
++
++	return 0;
++}
++
++/**
++ * adm_start_dma - start next transaction
++ * @achan - ADM dma channel
++ */
++static void adm_start_dma(struct adm_chan *achan)
++{
++	struct virt_dma_desc *vd = vchan_next_desc(&achan->vc);
++	struct adm_device *adev = achan->adev;
++	struct adm_async_desc *async_desc;
++
++	lockdep_assert_held(&achan->vc.lock);
++
++	if (!vd)
++		return;
++
++	list_del(&vd->node);
++
++	/* write next command list out to the CMD FIFO */
++	async_desc = container_of(vd, struct adm_async_desc, vd);
++	achan->curr_txd = async_desc;
++
++	/* reset channel error */
++	achan->error = 0;
++
++	if (!achan->initialized) {
++		/* enable interrupts */
++		writel(ADM_CH_CONF_SHADOW_EN |
++		       ADM_CH_CONF_PERM_MPU_CONF |
++		       ADM_CH_CONF_MPU_DISABLE |
++		       ADM_CH_CONF_SEC_DOMAIN(adev->ee),
++		       adev->regs + ADM_CH_CONF(achan->id));
++
++		writel(ADM_CH_RSLT_CONF_IRQ_EN | ADM_CH_RSLT_CONF_FLUSH_EN,
++			adev->regs + ADM_CH_RSLT_CONF(achan->id, adev->ee));
++
++		achan->initialized = 1;
++	}
++
++	/* set the crci block size if this transaction requires CRCI */
++	if (async_desc->crci) {
++		writel(async_desc->mux | async_desc->blk_size,
++			adev->regs + ADM_CRCI_CTL(async_desc->crci, adev->ee));
++	}
++
++	/* make sure IRQ enable doesn't get reordered */
++	wmb();
++
++	/* write next command list out to the CMD FIFO */
++	writel(ALIGN(async_desc->dma_addr, ADM_DESC_ALIGN) >> 3,
++		adev->regs + ADM_CH_CMD_PTR(achan->id, adev->ee));
++}
++
++/**
++ * adm_dma_irq - irq handler for ADM controller
++ * @irq: IRQ of interrupt
++ * @data: callback data
++ *
++ * IRQ handler for the bam controller
++ */
++static irqreturn_t adm_dma_irq(int irq, void *data)
++{
++	struct adm_device *adev = data;
++	u32 srcs, i;
++	struct adm_async_desc *async_desc;
++	unsigned long flags;
++
++	srcs = readl_relaxed(adev->regs +
++			ADM_SEC_DOMAIN_IRQ_STATUS(adev->ee));
++
++	for (i = 0; i < ADM_MAX_CHANNELS; i++) {
++		struct adm_chan *achan = &adev->channels[i];
++		u32 status, result;
++
++		if (srcs & BIT(i)) {
++			status = readl_relaxed(adev->regs +
++				ADM_CH_STATUS_SD(i, adev->ee));
++
++			/* if no result present, skip */
++			if (!(status & ADM_CH_STATUS_VALID))
++				continue;
++
++			result = readl_relaxed(adev->regs +
++				ADM_CH_RSLT(i, adev->ee));
++
++			/* no valid results, skip */
++			if (!(result & ADM_CH_RSLT_VALID))
++				continue;
++
++			/* flag error if transaction was flushed or failed */
++			if (result & (ADM_CH_RSLT_ERR | ADM_CH_RSLT_FLUSH))
++				achan->error = 1;
++
++			spin_lock_irqsave(&achan->vc.lock, flags);
++			async_desc = achan->curr_txd;
++
++			achan->curr_txd = NULL;
++
++			if (async_desc) {
++				vchan_cookie_complete(&async_desc->vd);
++
++				/* kick off next DMA */
++				adm_start_dma(achan);
++			}
++
++			spin_unlock_irqrestore(&achan->vc.lock, flags);
++		}
++	}
++
++	return IRQ_HANDLED;
++}
++
++/**
++ * adm_tx_status - returns status of transaction
++ * @chan: dma channel
++ * @cookie: transaction cookie
++ * @txstate: DMA transaction state
++ *
++ * Return status of dma transaction
++ */
++static enum dma_status adm_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
++	struct dma_tx_state *txstate)
++{
++	struct adm_chan *achan = to_adm_chan(chan);
++	struct virt_dma_desc *vd;
++	enum dma_status ret;
++	unsigned long flags;
++	size_t residue = 0;
++
++	ret = dma_cookie_status(chan, cookie, txstate);
++	if (ret == DMA_COMPLETE || !txstate)
++		return ret;
++
++	spin_lock_irqsave(&achan->vc.lock, flags);
++
++	vd = vchan_find_desc(&achan->vc, cookie);
++	if (vd)
++		residue = container_of(vd, struct adm_async_desc, vd)->length;
++
++	spin_unlock_irqrestore(&achan->vc.lock, flags);
++
++	/*
++	 * residue is either the full length if it is in the issued list, or 0
++	 * if it is in progress.  We have no reliable way of determining
++	 * anything inbetween
++	*/
++	dma_set_residue(txstate, residue);
++
++	if (achan->error)
++		return DMA_ERROR;
++
++	return ret;
++}
++
++/**
++ * adm_issue_pending - starts pending transactions
++ * @chan: dma channel
++ *
++ * Issues all pending transactions and starts DMA
++ */
++static void adm_issue_pending(struct dma_chan *chan)
++{
++	struct adm_chan *achan = to_adm_chan(chan);
++	unsigned long flags;
++
++	spin_lock_irqsave(&achan->vc.lock, flags);
++
++	if (vchan_issue_pending(&achan->vc) && !achan->curr_txd)
++		adm_start_dma(achan);
++	spin_unlock_irqrestore(&achan->vc.lock, flags);
++}
++
++/**
++ * adm_dma_free_desc - free descriptor memory
++ * @vd: virtual descriptor
++ *
++ */
++static void adm_dma_free_desc(struct virt_dma_desc *vd)
++{
++	struct adm_async_desc *async_desc = container_of(vd,
++			struct adm_async_desc, vd);
++
++	dma_unmap_single(async_desc->adev->dev, async_desc->dma_addr,
++			 async_desc->dma_len, DMA_TO_DEVICE);
++	kfree(async_desc->cpl);
++	kfree(async_desc);
++}
++
++static void adm_channel_init(struct adm_device *adev, struct adm_chan *achan,
++	u32 index)
++{
++	achan->id = index;
++	achan->adev = adev;
++
++	vchan_init(&achan->vc, &adev->common);
++	achan->vc.desc_free = adm_dma_free_desc;
++}
++
++static int adm_dma_probe(struct platform_device *pdev)
++{
++	struct adm_device *adev;
++	struct resource *iores;
++	int ret;
++	u32 i;
++
++	adev = devm_kzalloc(&pdev->dev, sizeof(*adev), GFP_KERNEL);
++	if (!adev)
++		return -ENOMEM;
++
++	adev->dev = &pdev->dev;
++
++	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	adev->regs = devm_ioremap_resource(&pdev->dev, iores);
++	if (IS_ERR(adev->regs))
++		return PTR_ERR(adev->regs);
++
++	adev->irq = platform_get_irq(pdev, 0);
++	if (adev->irq < 0)
++		return adev->irq;
++
++	ret = of_property_read_u32(pdev->dev.of_node, "qcom,ee", &adev->ee);
++	if (ret) {
++		dev_err(adev->dev, "Execution environment unspecified\n");
++		return ret;
++	}
++
++	adev->core_clk = devm_clk_get(adev->dev, "core");
++	if (IS_ERR(adev->core_clk))
++		return PTR_ERR(adev->core_clk);
++
++	ret = clk_prepare_enable(adev->core_clk);
++	if (ret) {
++		dev_err(adev->dev, "failed to prepare/enable core clock\n");
++		return ret;
++	}
++
++	adev->iface_clk = devm_clk_get(adev->dev, "iface");
++	if (IS_ERR(adev->iface_clk)) {
++		ret = PTR_ERR(adev->iface_clk);
++		goto err_disable_core_clk;
++	}
++
++	ret = clk_prepare_enable(adev->iface_clk);
++	if (ret) {
++		dev_err(adev->dev, "failed to prepare/enable iface clock\n");
++		goto err_disable_core_clk;
++	}
++
++	adev->clk_reset = devm_reset_control_get(&pdev->dev, "clk");
++	if (IS_ERR(adev->clk_reset)) {
++		dev_err(adev->dev, "failed to get ADM0 reset\n");
++		ret = PTR_ERR(adev->clk_reset);
++		goto err_disable_clks;
++	}
++
++	adev->c0_reset = devm_reset_control_get(&pdev->dev, "c0");
++	if (IS_ERR(adev->c0_reset)) {
++		dev_err(adev->dev, "failed to get ADM0 C0 reset\n");
++		ret = PTR_ERR(adev->c0_reset);
++		goto err_disable_clks;
++	}
++
++	adev->c1_reset = devm_reset_control_get(&pdev->dev, "c1");
++	if (IS_ERR(adev->c1_reset)) {
++		dev_err(adev->dev, "failed to get ADM0 C1 reset\n");
++		ret = PTR_ERR(adev->c1_reset);
++		goto err_disable_clks;
++	}
++
++	adev->c2_reset = devm_reset_control_get(&pdev->dev, "c2");
++	if (IS_ERR(adev->c2_reset)) {
++		dev_err(adev->dev, "failed to get ADM0 C2 reset\n");
++		ret = PTR_ERR(adev->c2_reset);
++		goto err_disable_clks;
++	}
++
++	reset_control_assert(adev->clk_reset);
++	reset_control_assert(adev->c0_reset);
++	reset_control_assert(adev->c1_reset);
++	reset_control_assert(adev->c2_reset);
++
++	reset_control_deassert(adev->clk_reset);
++	reset_control_deassert(adev->c0_reset);
++	reset_control_deassert(adev->c1_reset);
++	reset_control_deassert(adev->c2_reset);
++
++	adev->channels = devm_kcalloc(adev->dev, ADM_MAX_CHANNELS,
++				sizeof(*adev->channels), GFP_KERNEL);
++
++	if (!adev->channels) {
++		ret = -ENOMEM;
++		goto err_disable_clks;
++	}
++
++	/* allocate and initialize channels */
++	INIT_LIST_HEAD(&adev->common.channels);
++
++	for (i = 0; i < ADM_MAX_CHANNELS; i++)
++		adm_channel_init(adev, &adev->channels[i], i);
++
++	/* reset CRCIs */
++	for (i = 0; i < 16; i++)
++		writel(ADM_CRCI_CTL_RST, adev->regs +
++			ADM_CRCI_CTL(i, adev->ee));
++
++	/* configure client interfaces */
++	writel(ADM_CI_RANGE_START(0x40) | ADM_CI_RANGE_END(0xb0) |
++		ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(0));
++	writel(ADM_CI_RANGE_START(0x2a) | ADM_CI_RANGE_END(0x2c) |
++		ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(1));
++	writel(ADM_CI_RANGE_START(0x12) | ADM_CI_RANGE_END(0x28) |
++		ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(2));
++	writel(ADM_GP_CTL_LP_EN | ADM_GP_CTL_LP_CNT(0xf),
++		adev->regs + ADM_GP_CTL);
++
++	ret = devm_request_irq(adev->dev, adev->irq, adm_dma_irq,
++			0, "adm_dma", adev);
++	if (ret)
++		goto err_disable_clks;
++
++	platform_set_drvdata(pdev, adev);
++
++	adev->common.dev = adev->dev;
++	adev->common.dev->dma_parms = &adev->dma_parms;
++
++	/* set capabilities */
++	dma_cap_zero(adev->common.cap_mask);
++	dma_cap_set(DMA_SLAVE, adev->common.cap_mask);
++	dma_cap_set(DMA_PRIVATE, adev->common.cap_mask);
++
++	/* initialize dmaengine apis */
++	adev->common.directions = BIT(DMA_DEV_TO_MEM | DMA_MEM_TO_DEV);
++	adev->common.residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR;
++	adev->common.src_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES;
++	adev->common.dst_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES;
++	adev->common.device_free_chan_resources = adm_free_chan;
++	adev->common.device_prep_slave_sg = adm_prep_slave_sg;
++	adev->common.device_issue_pending = adm_issue_pending;
++	adev->common.device_tx_status = adm_tx_status;
++	adev->common.device_terminate_all = adm_terminate_all;
++	adev->common.device_config = adm_slave_config;
++
++	ret = dma_async_device_register(&adev->common);
++	if (ret) {
++		dev_err(adev->dev, "failed to register dma async device\n");
++		goto err_disable_clks;
++	}
++
++	ret = of_dma_controller_register(pdev->dev.of_node,
++					 of_dma_xlate_by_chan_id,
++					 &adev->common);
++	if (ret)
++		goto err_unregister_dma;
++
++	return 0;
++
++err_unregister_dma:
++	dma_async_device_unregister(&adev->common);
++err_disable_clks:
++	clk_disable_unprepare(adev->iface_clk);
++err_disable_core_clk:
++	clk_disable_unprepare(adev->core_clk);
++
++	return ret;
++}
++
++static int adm_dma_remove(struct platform_device *pdev)
++{
++	struct adm_device *adev = platform_get_drvdata(pdev);
++	struct adm_chan *achan;
++	u32 i;
++
++	of_dma_controller_free(pdev->dev.of_node);
++	dma_async_device_unregister(&adev->common);
++
++	for (i = 0; i < ADM_MAX_CHANNELS; i++) {
++		achan = &adev->channels[i];
++
++		/* mask IRQs for this channel/EE pair */
++		writel(0, adev->regs + ADM_CH_RSLT_CONF(achan->id, adev->ee));
++
++		adm_terminate_all(&adev->channels[i].vc.chan);
++	}
++
++	devm_free_irq(adev->dev, adev->irq, adev);
++
++	clk_disable_unprepare(adev->core_clk);
++	clk_disable_unprepare(adev->iface_clk);
++
++	return 0;
++}
++
++static const struct of_device_id adm_of_match[] = {
++	{ .compatible = "qcom,adm", },
++	{}
++};
++MODULE_DEVICE_TABLE(of, adm_of_match);
++
++static struct platform_driver adm_dma_driver = {
++	.probe = adm_dma_probe,
++	.remove = adm_dma_remove,
++	.driver = {
++		.name = "adm-dma-engine",
++		.of_match_table = adm_of_match,
++	},
++};
++
++module_platform_driver(adm_dma_driver);
++
++MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
++MODULE_DESCRIPTION("QCOM ADM DMA engine driver");
++MODULE_LICENSE("GPL v2");
diff --git a/target/linux/ipq806x/patches-4.14/0030-clk-Disable-i2c-device-on-gsbi4.patch b/target/linux/ipq806x/patches-4.14/0030-clk-Disable-i2c-device-on-gsbi4.patch
new file mode 100644
index 0000000..b2a6afe
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0030-clk-Disable-i2c-device-on-gsbi4.patch
@@ -0,0 +1,40 @@
+From 0c974b87829e007dc4fae94e20d488204e20e662 Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Thu, 9 Mar 2017 08:16:10 +0100
+Subject: [PATCH 30/69] clk: Disable i2c device on gsbi4
+
+This patch was not annotated and comes from the v4.4 tree.
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ drivers/clk/qcom/gcc-ipq806x.c | 5 +++--
+ 1 file changed, 3 insertions(+), 2 deletions(-)
+
+--- a/drivers/clk/qcom/gcc-ipq806x.c
++++ b/drivers/clk/qcom/gcc-ipq806x.c
+@@ -294,7 +294,7 @@ static struct clk_rcg gsbi1_uart_src = {
+ 			.parent_names = gcc_pxo_pll8,
+ 			.num_parents = 2,
+ 			.ops = &clk_rcg_ops,
+-			.flags = CLK_SET_PARENT_GATE,
++			.flags = CLK_SET_PARENT_GATE | CLK_IGNORE_UNUSED,
+ 		},
+ 	},
+ };
+@@ -312,7 +312,7 @@ static struct clk_branch gsbi1_uart_clk
+ 			},
+ 			.num_parents = 1,
+ 			.ops = &clk_branch_ops,
+-			.flags = CLK_SET_RATE_PARENT,
++			.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+ 		},
+ 	},
+ };
+@@ -890,6 +890,7 @@ static struct clk_branch gsbi1_h_clk = {
+ 		.hw.init = &(struct clk_init_data){
+ 			.name = "gsbi1_h_clk",
+ 			.ops = &clk_branch_ops,
++			.flags = CLK_IGNORE_UNUSED,
+ 		},
+ 	},
+ };
diff --git a/target/linux/ipq806x/patches-4.14/0031-mtd-add-SMEM-parser-for-QCOM-platforms.patch b/target/linux/ipq806x/patches-4.14/0031-mtd-add-SMEM-parser-for-QCOM-platforms.patch
new file mode 100644
index 0000000..a7cfac5
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0031-mtd-add-SMEM-parser-for-QCOM-platforms.patch
@@ -0,0 +1,282 @@
+From d8eeb4de90e968ba32d956728c866f20752cf2c3 Mon Sep 17 00:00:00 2001
+From: Mathieu Olivari <mathieu@codeaurora.org>
+Date: Thu, 9 Mar 2017 08:18:08 +0100
+Subject: [PATCH 31/69] mtd: add SMEM parser for QCOM platforms
+
+On QCOM platforms using MTD devices storage (such as IPQ806x), SMEM is
+used to store partition layout. This new parser can now be used to read
+SMEM and use it to register an MTD layout according to its content.
+
+Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
+Signed-off-by: Ram Chandra Jangir <rjangi@codeaurora.org>
+---
+ drivers/mtd/Kconfig          |   7 ++
+ drivers/mtd/Makefile         |   1 +
+ drivers/mtd/qcom_smem_part.c | 228 +++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 236 insertions(+)
+ create mode 100644 drivers/mtd/qcom_smem_part.c
+
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -194,6 +194,13 @@ config MTD_MYLOADER_PARTS
+ 	  You will still need the parsing functions to be called by the driver
+ 	  for your particular device. It won't happen automatically.
+ 
++config MTD_QCOM_SMEM_PARTS
++	tristate "QCOM SMEM partitioning support"
++	depends on QCOM_SMEM
++	help
++	  This provides partitions parser for QCOM devices using SMEM
++	  such as IPQ806x.
++
+ comment "User Modules And Translation Layers"
+ 
+ #
+--- /dev/null
++++ b/drivers/mtd/qcom_smem_part.c
+@@ -0,0 +1,235 @@
++/*
++ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/kernel.h>
++#include <linux/device.h>
++#include <linux/slab.h>
++
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/spi/spi.h>
++#include <linux/module.h>
++
++#include <linux/soc/qcom/smem.h>
++
++/* Processor/host identifier for the application processor */
++#define SMEM_HOST_APPS			0
++
++/* SMEM items index */
++#define SMEM_AARM_PARTITION_TABLE	9
++#define SMEM_BOOT_FLASH_TYPE		421
++#define SMEM_BOOT_FLASH_BLOCK_SIZE	424
++
++/* SMEM Flash types */
++#define SMEM_FLASH_NAND			2
++#define SMEM_FLASH_SPI			6
++
++#define SMEM_PART_NAME_SZ		16
++#define SMEM_PARTS_MAX			32
++
++struct smem_partition {
++	char name[SMEM_PART_NAME_SZ];
++	__le32 start;
++	__le32 size;
++	__le32 attr;
++};
++
++struct smem_partition_table {
++	u8 magic[8];
++	__le32 version;
++	__le32 len;
++	struct smem_partition parts[SMEM_PARTS_MAX];
++};
++
++/* SMEM Magic values in partition table */
++static const u8 SMEM_PTABLE_MAGIC[] = {
++	0xaa, 0x73, 0xee, 0x55,
++	0xdb, 0xbd, 0x5e, 0xe3,
++};
++
++static int qcom_smem_get_flash_blksz(u64 **smem_blksz)
++{
++	size_t size;
++
++	*smem_blksz = qcom_smem_get(SMEM_HOST_APPS, SMEM_BOOT_FLASH_BLOCK_SIZE,
++			    	    &size);
++
++	if (IS_ERR(*smem_blksz)) {
++		pr_err("Unable to read flash blksz from SMEM\n");
++		return -ENOENT;
++	}
++
++	if (size != sizeof(**smem_blksz)) {
++		pr_err("Invalid flash blksz size in SMEM\n");
++		return -EINVAL;
++	}
++
++	return 0;
++}
++
++static int qcom_smem_get_flash_type(u64 **smem_flash_type)
++{
++	size_t size;
++
++	*smem_flash_type = qcom_smem_get(SMEM_HOST_APPS, SMEM_BOOT_FLASH_TYPE,
++			    		&size);
++
++	if (IS_ERR(*smem_flash_type)) {
++		pr_err("Unable to read flash type from SMEM\n");
++		return -ENOENT;
++	}
++
++	if (size != sizeof(**smem_flash_type)) {
++		pr_err("Invalid flash type size in SMEM\n");
++		return -EINVAL;
++	}
++
++	return 0;
++}
++
++static int qcom_smem_get_flash_partitions(struct smem_partition_table **pparts)
++{
++	size_t size;
++
++	*pparts = qcom_smem_get(SMEM_HOST_APPS, SMEM_AARM_PARTITION_TABLE,
++				&size);
++
++	if (IS_ERR(*pparts)) {
++		pr_err("Unable to read partition table from SMEM\n");
++		return -ENOENT;
++	}
++
++	return 0;
++}
++
++static int of_dev_node_match(struct device *dev, void *data)
++{
++	return dev->of_node == data;
++}
++
++static bool is_spi_device(struct device_node *np)
++{
++	struct device *dev;
++
++	dev = bus_find_device(&spi_bus_type, NULL, np, of_dev_node_match);
++	if (!dev)
++		return false;
++
++	put_device(dev);
++	return true;
++}
++
++static int parse_qcom_smem_partitions(struct mtd_info *master,
++				      const struct mtd_partition **pparts,
++				      struct mtd_part_parser_data *data)
++{
++	struct smem_partition_table *smem_parts;
++	u64 *smem_flash_type, *smem_blksz;
++	struct mtd_partition *mtd_parts;
++	struct device_node *of_node = master->dev.of_node;
++	int i, ret;
++
++	/*
++	 * SMEM will only store the partition table of the boot device.
++	 * If this is not the boot device, do not return any partition.
++	 */
++	ret = qcom_smem_get_flash_type(&smem_flash_type);
++	if (ret < 0)
++		return ret;
++
++	if ((*smem_flash_type == SMEM_FLASH_NAND && !mtd_type_is_nand(master))
++	    || (*smem_flash_type == SMEM_FLASH_SPI && !is_spi_device(of_node)))
++		return 0;
++
++	/*
++	 * Just for sanity purpose, make sure the block size in SMEM matches the
++	 * block size of the MTD device
++	 */
++	ret = qcom_smem_get_flash_blksz(&smem_blksz);
++	if (ret < 0)
++		return ret;
++
++	if (*smem_blksz != master->erasesize) {
++		pr_err("SMEM block size differs from MTD block size\n");
++		return -EINVAL;
++	}
++
++	/* Get partition pointer from SMEM */
++	ret = qcom_smem_get_flash_partitions(&smem_parts);
++	if (ret < 0)
++		return ret;
++
++	if (memcmp(SMEM_PTABLE_MAGIC, smem_parts->magic,
++		   sizeof(SMEM_PTABLE_MAGIC))) {
++		pr_err("SMEM partition magic invalid\n");
++		return -EINVAL;
++	}
++
++	/* Allocate and populate the mtd structures */
++	mtd_parts = kcalloc(le32_to_cpu(smem_parts->len), sizeof(*mtd_parts),
++			    GFP_KERNEL);
++	if (!mtd_parts)
++		return -ENOMEM;
++
++	for (i = 0; i < smem_parts->len; i++) {
++		struct smem_partition *s_part = &smem_parts->parts[i];
++		struct mtd_partition *m_part = &mtd_parts[i];
++
++		m_part->name = s_part->name;
++		m_part->size = le32_to_cpu(s_part->size) * (*smem_blksz);
++		m_part->offset = le32_to_cpu(s_part->start) * (*smem_blksz);
++
++		/*
++		 * The last SMEM partition may have its size marked as
++		 * something like 0xffffffff, which means "until the end of the
++		 * flash device". In this case, truncate it.
++		 */
++		if (m_part->offset + m_part->size > master->size)
++			m_part->size = master->size - m_part->offset;
++	}
++
++	*pparts = mtd_parts;
++
++	return smem_parts->len;
++}
++
++static const struct of_device_id qcom_smem_of_match_table[] = {
++	{ .compatible = "qcom,smem" },
++	{},
++};
++MODULE_DEVICE_TABLE(of, qcom_smem_of_match_table);
++
++static struct mtd_part_parser qcom_smem_parser = {
++	.owner = THIS_MODULE,
++	.parse_fn = parse_qcom_smem_partitions,
++	.name = "qcom-smem",
++	.of_match_table = qcom_smem_of_match_table,
++};
++
++static int __init qcom_smem_parser_init(void)
++{
++	register_mtd_parser(&qcom_smem_parser);
++	return 0;
++}
++
++static void __exit qcom_smem_parser_exit(void)
++{
++	deregister_mtd_parser(&qcom_smem_parser);
++}
++
++module_init(qcom_smem_parser_init);
++module_exit(qcom_smem_parser_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Mathieu Olivari <mathieu@codeaurora.org>");
++MODULE_DESCRIPTION("Parsing code for SMEM based partition tables");
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -17,6 +17,7 @@ obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
+ obj-$(CONFIG_MTD_BCM63XX_PARTS)	+= bcm63xxpart.o
+ obj-$(CONFIG_MTD_BCM47XX_PARTS)	+= bcm47xxpart.o
+ obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
++obj-$(CONFIG_MTD_QCOM_SMEM_PARTS) += qcom_smem_part.o
+ obj-y				+= parsers/
+ 
+ # 'Users' - code which presents functionality to userspace.
diff --git a/target/linux/ipq806x/patches-4.14/0032-phy-add-qcom-dwc3-phy.patch b/target/linux/ipq806x/patches-4.14/0032-phy-add-qcom-dwc3-phy.patch
new file mode 100644
index 0000000..ddfe0c1
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0032-phy-add-qcom-dwc3-phy.patch
@@ -0,0 +1,616 @@
+From b9004f4fd23e4c614d71c972f3a9311665480e29 Mon Sep 17 00:00:00 2001
+From: Andy Gross <agross@codeaurora.org>
+Date: Thu, 9 Mar 2017 08:19:18 +0100
+Subject: [PATCH 32/69] phy: add qcom dwc3 phy
+
+Signed-off-by: Andy Gross <agross@codeaurora.org>
+---
+ drivers/phy/Kconfig         |  12 +
+ drivers/phy/Makefile        |   1 +
+ drivers/phy/phy-qcom-dwc3.c | 575 ++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 588 insertions(+)
+ create mode 100644 drivers/phy/phy-qcom-dwc3.c
+
+--- a/drivers/phy/qualcomm/Kconfig
++++ b/drivers/phy/qualcomm/Kconfig
+@@ -56,3 +56,15 @@
+ 	select GENERIC_PHY
+ 	help
+ 	  Support for the USB HSIC ULPI compliant PHY on QCOM chipsets.
++
++config PHY_QCOM_DWC3
++	tristate "QCOM DWC3 USB PHY support"
++	depends on ARCH_QCOM
++	depends on HAS_IOMEM
++	depends on OF
++	select GENERIC_PHY
++	help
++	  This option enables support for the Synopsis PHYs present inside the
++	  Qualcomm USB3.0 DWC3 controller.  This driver supports both HS and SS
++	  PHY controllers.
++
+--- a/drivers/phy/qualcomm/Makefile
++++ b/drivers/phy/qualcomm/Makefile
+@@ -8,3 +8,4 @@
+ obj-$(CONFIG_PHY_QCOM_UFS)		+= phy-qcom-ufs-qmp-20nm.o
+ obj-$(CONFIG_PHY_QCOM_USB_HS) 		+= phy-qcom-usb-hs.o
+ obj-$(CONFIG_PHY_QCOM_USB_HSIC) 	+= phy-qcom-usb-hsic.o
++obj-$(CONFIG_PHY_QCOM_DWC3)		+= phy-qcom-dwc3.o
+--- /dev/null
++++ b/drivers/phy/qualcomm/phy-qcom-dwc3.c
+@@ -0,0 +1,575 @@
++/* Copyright (c) 2014-2015, Code Aurora Forum. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++* This program is distributed in the hope that it will be useful,
++* but WITHOUT ANY WARRANTY; without even the implied warranty of
++* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++* GNU General Public License for more details.
++*/
++
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/io.h>
++#include <linux/module.h>
++#include <linux/of.h>
++#include <linux/phy/phy.h>
++#include <linux/platform_device.h>
++#include <linux/delay.h>
++
++/**
++ *  USB QSCRATCH Hardware registers
++ */
++#define QSCRATCH_GENERAL_CFG		(0x08)
++#define HSUSB_PHY_CTRL_REG		(0x10)
++
++/* PHY_CTRL_REG */
++#define HSUSB_CTRL_DMSEHV_CLAMP			BIT(24)
++#define HSUSB_CTRL_USB2_SUSPEND			BIT(23)
++#define HSUSB_CTRL_UTMI_CLK_EN			BIT(21)
++#define HSUSB_CTRL_UTMI_OTG_VBUS_VALID		BIT(20)
++#define HSUSB_CTRL_USE_CLKCORE			BIT(18)
++#define HSUSB_CTRL_DPSEHV_CLAMP			BIT(17)
++#define HSUSB_CTRL_COMMONONN			BIT(11)
++#define HSUSB_CTRL_ID_HV_CLAMP			BIT(9)
++#define HSUSB_CTRL_OTGSESSVLD_CLAMP		BIT(8)
++#define HSUSB_CTRL_CLAMP_EN			BIT(7)
++#define HSUSB_CTRL_RETENABLEN			BIT(1)
++#define HSUSB_CTRL_POR				BIT(0)
++
++/* QSCRATCH_GENERAL_CFG */
++#define HSUSB_GCFG_XHCI_REV		BIT(2)
++
++/**
++ *  USB QSCRATCH Hardware registers
++ */
++#define SSUSB_PHY_CTRL_REG		(0x00)
++#define SSUSB_PHY_PARAM_CTRL_1		(0x04)
++#define SSUSB_PHY_PARAM_CTRL_2		(0x08)
++#define CR_PROTOCOL_DATA_IN_REG		(0x0c)
++#define CR_PROTOCOL_DATA_OUT_REG	(0x10)
++#define CR_PROTOCOL_CAP_ADDR_REG	(0x14)
++#define CR_PROTOCOL_CAP_DATA_REG	(0x18)
++#define CR_PROTOCOL_READ_REG		(0x1c)
++#define CR_PROTOCOL_WRITE_REG		(0x20)
++
++/* PHY_CTRL_REG */
++#define SSUSB_CTRL_REF_USE_PAD		BIT(28)
++#define SSUSB_CTRL_TEST_POWERDOWN	BIT(27)
++#define SSUSB_CTRL_LANE0_PWR_PRESENT	BIT(24)
++#define SSUSB_CTRL_SS_PHY_EN		BIT(8)
++#define SSUSB_CTRL_SS_PHY_RESET		BIT(7)
++
++/* SSPHY control registers */
++#define SSPHY_CTRL_RX_OVRD_IN_HI(lane)	(0x1006 + 0x100 * lane)
++#define SSPHY_CTRL_TX_OVRD_DRV_LO(lane)	(0x1002 + 0x100 * lane)
++
++/* SSPHY SoC version specific values */
++#define SSPHY_RX_EQ_VALUE		4	/* Override value for rx_eq */
++#define SSPHY_TX_DEEMPH_3_5DB		23	/* Override value for transmit
++						   preemphasis */
++#define SSPHY_MPLL_VALUE		0	/* Override value for mpll */
++
++/* QSCRATCH PHY_PARAM_CTRL1 fields */
++#define PHY_PARAM_CTRL1_TX_FULL_SWING_MASK	0x07f00000u
++#define PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK	0x000fc000u
++#define PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK	0x00003f00u
++#define PHY_PARAM_CTRL1_LOS_BIAS_MASK		0x000000f8u
++
++#define PHY_PARAM_CTRL1_MASK				\
++		(PHY_PARAM_CTRL1_TX_FULL_SWING_MASK |	\
++		 PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK |	\
++		 PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK |	\
++		 PHY_PARAM_CTRL1_LOS_BIAS_MASK)
++
++#define PHY_PARAM_CTRL1_TX_FULL_SWING(x)	\
++		(((x) << 20) & PHY_PARAM_CTRL1_TX_FULL_SWING_MASK)
++#define PHY_PARAM_CTRL1_TX_DEEMPH_6DB(x)	\
++		(((x) << 14) & PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK)
++#define PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB(x)	\
++		(((x) <<  8) & PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK)
++#define PHY_PARAM_CTRL1_LOS_BIAS(x)	\
++		(((x) <<  3) & PHY_PARAM_CTRL1_LOS_BIAS_MASK)
++
++/* RX OVRD IN HI bits */
++#define RX_OVRD_IN_HI_RX_RESET_OVRD		BIT(13)
++#define RX_OVRD_IN_HI_RX_RX_RESET		BIT(12)
++#define RX_OVRD_IN_HI_RX_EQ_OVRD		BIT(11)
++#define RX_OVRD_IN_HI_RX_EQ_MASK		0x0700
++#define RX_OVRD_IN_HI_RX_EQ_SHIFT		8
++#define RX_OVRD_IN_HI_RX_EQ_EN_OVRD		BIT(7)
++#define RX_OVRD_IN_HI_RX_EQ_EN			BIT(6)
++#define RX_OVRD_IN_HI_RX_LOS_FILTER_OVRD	BIT(5)
++#define RX_OVRD_IN_HI_RX_LOS_FILTER_MASK	0x0018
++#define RX_OVRD_IN_HI_RX_RATE_OVRD		BIT(2)
++#define RX_OVRD_IN_HI_RX_RATE_MASK		0x0003
++
++/* TX OVRD DRV LO register bits */
++#define TX_OVRD_DRV_LO_AMPLITUDE_MASK	0x007F
++#define TX_OVRD_DRV_LO_PREEMPH_MASK	0x3F80
++#define TX_OVRD_DRV_LO_PREEMPH_SHIFT	7
++#define TX_OVRD_DRV_LO_EN		BIT(14)
++
++/* SS CAP register bits */
++#define SS_CR_CAP_ADDR_REG		BIT(0)
++#define SS_CR_CAP_DATA_REG		BIT(0)
++#define SS_CR_READ_REG			BIT(0)
++#define SS_CR_WRITE_REG			BIT(0)
++
++struct qcom_dwc3_usb_phy {
++	void __iomem		*base;
++	struct device		*dev;
++	struct clk		*xo_clk;
++	struct clk		*ref_clk;
++	u32			rx_eq;
++	u32			tx_deamp_3_5db;
++	u32			mpll;
++};
++
++struct qcom_dwc3_phy_drvdata {
++	struct phy_ops	ops;
++	u32		clk_rate;
++};
++
++/**
++ * Write register and read back masked value to confirm it is written
++ *
++ * @base - QCOM DWC3 PHY base virtual address.
++ * @offset - register offset.
++ * @mask - register bitmask specifying what should be updated
++ * @val - value to write.
++ */
++static inline void qcom_dwc3_phy_write_readback(
++	struct qcom_dwc3_usb_phy *phy_dwc3, u32 offset,
++	const u32 mask, u32 val)
++{
++	u32 write_val, tmp = readl(phy_dwc3->base + offset);
++
++	tmp &= ~mask;		/* retain other bits */
++	write_val = tmp | val;
++
++	writel(write_val, phy_dwc3->base + offset);
++
++	/* Read back to see if val was written */
++	tmp = readl(phy_dwc3->base + offset);
++	tmp &= mask;		/* clear other bits */
++
++	if (tmp != val)
++		dev_err(phy_dwc3->dev, "write: %x to QSCRATCH: %x FAILED\n",
++			val, offset);
++}
++
++static int wait_for_latch(void __iomem *addr)
++{
++	u32 retry = 10;
++
++	while (true) {
++		if (!readl(addr))
++			break;
++
++		if (--retry == 0)
++			return -ETIMEDOUT;
++
++		usleep_range(10, 20);
++	}
++
++	return 0;
++}
++
++/**
++ * Write SSPHY register
++ *
++ * @base - QCOM DWC3 PHY base virtual address.
++ * @addr - SSPHY address to write.
++ * @val - value to write.
++ */
++static int qcom_dwc3_ss_write_phycreg(struct qcom_dwc3_usb_phy *phy_dwc3,
++					u32 addr, u32 val)
++{
++	int ret;
++
++	writel(addr, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG);
++	writel(SS_CR_CAP_ADDR_REG, phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);
++
++	ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);
++	if (ret)
++		goto err_wait;
++
++	writel(val, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG);
++	writel(SS_CR_CAP_DATA_REG, phy_dwc3->base + CR_PROTOCOL_CAP_DATA_REG);
++
++	ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_DATA_REG);
++	if (ret)
++		goto err_wait;
++
++	writel(SS_CR_WRITE_REG, phy_dwc3->base + CR_PROTOCOL_WRITE_REG);
++
++	ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_WRITE_REG);
++
++err_wait:
++	if (ret)
++		dev_err(phy_dwc3->dev, "timeout waiting for latch\n");
++	return ret;
++}
++
++/**
++ * Read SSPHY register.
++ *
++ * @base - QCOM DWC3 PHY base virtual address.
++ * @addr - SSPHY address to read.
++ */
++static int qcom_dwc3_ss_read_phycreg(void __iomem *base, u32 addr, u32 *val)
++{
++	int ret;
++
++	writel(addr, base + CR_PROTOCOL_DATA_IN_REG);
++	writel(SS_CR_CAP_ADDR_REG, base + CR_PROTOCOL_CAP_ADDR_REG);
++
++	ret = wait_for_latch(base + CR_PROTOCOL_CAP_ADDR_REG);
++	if (ret)
++		goto err_wait;
++
++	/*
++	 * Due to hardware bug, first read of SSPHY register might be
++	 * incorrect. Hence as workaround, SW should perform SSPHY register
++	 * read twice, but use only second read and ignore first read.
++	 */
++	writel(SS_CR_READ_REG, base + CR_PROTOCOL_READ_REG);
++
++	ret = wait_for_latch(base + CR_PROTOCOL_READ_REG);
++	if (ret)
++		goto err_wait;
++
++	/* throwaway read */
++	readl(base + CR_PROTOCOL_DATA_OUT_REG);
++
++	writel(SS_CR_READ_REG, base + CR_PROTOCOL_READ_REG);
++
++	ret = wait_for_latch(base + CR_PROTOCOL_READ_REG);
++	if (ret)
++		goto err_wait;
++
++	*val = readl(base + CR_PROTOCOL_DATA_OUT_REG);
++
++err_wait:
++	return ret;
++}
++
++static int qcom_dwc3_hs_phy_init(struct phy *phy)
++{
++	struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy);
++	int ret;
++	u32 val;
++
++	ret = clk_prepare_enable(phy_dwc3->xo_clk);
++	if (ret)
++		return ret;
++
++	ret = clk_prepare_enable(phy_dwc3->ref_clk);
++	if (ret) {
++		clk_disable_unprepare(phy_dwc3->xo_clk);
++		return ret;
++	}
++
++	/*
++	 * HSPHY Initialization: Enable UTMI clock, select 19.2MHz fsel
++	 * enable clamping, and disable RETENTION (power-on default is ENABLED)
++	 */
++	val = HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_DMSEHV_CLAMP |
++		HSUSB_CTRL_RETENABLEN  | HSUSB_CTRL_COMMONONN |
++		HSUSB_CTRL_OTGSESSVLD_CLAMP | HSUSB_CTRL_ID_HV_CLAMP |
++		HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_UTMI_OTG_VBUS_VALID |
++		HSUSB_CTRL_UTMI_CLK_EN | HSUSB_CTRL_CLAMP_EN | 0x70;
++
++	/* use core clock if external reference is not present */
++	if (!phy_dwc3->xo_clk)
++		val |= HSUSB_CTRL_USE_CLKCORE;
++
++	writel(val, phy_dwc3->base + HSUSB_PHY_CTRL_REG);
++	usleep_range(2000, 2200);
++
++	/* Disable (bypass) VBUS and ID filters */
++	writel(HSUSB_GCFG_XHCI_REV, phy_dwc3->base + QSCRATCH_GENERAL_CFG);
++
++	return 0;
++}
++
++static int qcom_dwc3_hs_phy_exit(struct phy *phy)
++{
++	struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy);
++
++	clk_disable_unprepare(phy_dwc3->ref_clk);
++	clk_disable_unprepare(phy_dwc3->xo_clk);
++
++	return 0;
++}
++
++static int qcom_dwc3_ss_phy_init(struct phy *phy)
++{
++	struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy);
++	int ret;
++	u32 data = 0;
++
++	ret = clk_prepare_enable(phy_dwc3->xo_clk);
++	if (ret)
++		return ret;
++
++	ret = clk_prepare_enable(phy_dwc3->ref_clk);
++	if (ret) {
++		clk_disable_unprepare(phy_dwc3->xo_clk);
++		return ret;
++	}
++
++	/* reset phy */
++	data = readl(phy_dwc3->base + SSUSB_PHY_CTRL_REG);
++	writel(data | SSUSB_CTRL_SS_PHY_RESET,
++		phy_dwc3->base + SSUSB_PHY_CTRL_REG);
++	usleep_range(2000, 2200);
++	writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
++
++	/* clear REF_PAD if we don't have XO clk */
++	if (!phy_dwc3->xo_clk)
++		data &= ~SSUSB_CTRL_REF_USE_PAD;
++	else
++		data |= SSUSB_CTRL_REF_USE_PAD;
++
++	writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
++
++	/* wait for ref clk to become stable, this can take up to 30ms */
++	msleep(30);
++
++	data |= SSUSB_CTRL_SS_PHY_EN | SSUSB_CTRL_LANE0_PWR_PRESENT;
++	writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
++
++	/*
++	 * WORKAROUND: There is SSPHY suspend bug due to which USB enumerates
++	 * in HS mode instead of SS mode. Workaround it by asserting
++	 * LANE0.TX_ALT_BLOCK.EN_ALT_BUS to enable TX to use alt bus mode
++	 */
++	ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base, 0x102D, &data);
++	if (ret)
++		goto err_phy_trans;
++
++	data |= (1 << 7);
++	ret = qcom_dwc3_ss_write_phycreg(phy_dwc3, 0x102D, data);
++	if (ret)
++		goto err_phy_trans;
++
++	ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base, 0x1010, &data);
++	if (ret)
++		goto err_phy_trans;
++
++	data &= ~0xff0;
++	data |= 0x20;
++	ret = qcom_dwc3_ss_write_phycreg(phy_dwc3, 0x1010, data);
++	if (ret)
++		goto err_phy_trans;
++
++	/*
++	 * Fix RX Equalization setting as follows
++	 * LANE0.RX_OVRD_IN_HI. RX_EQ_EN set to 0
++	 * LANE0.RX_OVRD_IN_HI.RX_EQ_EN_OVRD set to 1
++	 * LANE0.RX_OVRD_IN_HI.RX_EQ set based on SoC version
++	 * LANE0.RX_OVRD_IN_HI.RX_EQ_OVRD set to 1
++	 */
++	ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base,
++			SSPHY_CTRL_RX_OVRD_IN_HI(0), &data);
++	if (ret)
++		goto err_phy_trans;
++
++	data &= ~RX_OVRD_IN_HI_RX_EQ_EN;
++	data |= RX_OVRD_IN_HI_RX_EQ_EN_OVRD;
++	data &= ~RX_OVRD_IN_HI_RX_EQ_MASK;
++	data |= phy_dwc3->rx_eq << RX_OVRD_IN_HI_RX_EQ_SHIFT;
++	data |= RX_OVRD_IN_HI_RX_EQ_OVRD;
++	ret = qcom_dwc3_ss_write_phycreg(phy_dwc3,
++		SSPHY_CTRL_RX_OVRD_IN_HI(0), data);
++	if (ret)
++		goto err_phy_trans;
++
++	/*
++	 * Set EQ and TX launch amplitudes as follows
++	 * LANE0.TX_OVRD_DRV_LO.PREEMPH set based on SoC version
++	 * LANE0.TX_OVRD_DRV_LO.AMPLITUDE set to 110
++	 * LANE0.TX_OVRD_DRV_LO.EN set to 1.
++	 */
++	ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base,
++		SSPHY_CTRL_TX_OVRD_DRV_LO(0), &data);
++	if (ret)
++		goto err_phy_trans;
++
++	data &= ~TX_OVRD_DRV_LO_PREEMPH_MASK;
++	data |= phy_dwc3->tx_deamp_3_5db << TX_OVRD_DRV_LO_PREEMPH_SHIFT;
++	data &= ~TX_OVRD_DRV_LO_AMPLITUDE_MASK;
++	data |= 0x6E;
++	data |= TX_OVRD_DRV_LO_EN;
++	ret = qcom_dwc3_ss_write_phycreg(phy_dwc3,
++		SSPHY_CTRL_TX_OVRD_DRV_LO(0), data);
++	if (ret)
++		goto err_phy_trans;
++
++	qcom_dwc3_ss_write_phycreg(phy_dwc3, 0x30, phy_dwc3->mpll);
++
++	/*
++	 * Set the QSCRATCH PHY_PARAM_CTRL1 parameters as follows
++	 * TX_FULL_SWING [26:20] amplitude to 110
++	 * TX_DEEMPH_6DB [19:14] to 32
++	 * TX_DEEMPH_3_5DB [13:8] set based on SoC version
++	 * LOS_BIAS [7:3] to 9
++	 */
++	data = readl(phy_dwc3->base + SSUSB_PHY_PARAM_CTRL_1);
++
++	data &= ~PHY_PARAM_CTRL1_MASK;
++
++	data |= PHY_PARAM_CTRL1_TX_FULL_SWING(0x6e) |
++		PHY_PARAM_CTRL1_TX_DEEMPH_6DB(0x20) |
++		PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB(phy_dwc3->tx_deamp_3_5db) |
++		PHY_PARAM_CTRL1_LOS_BIAS(0x9);
++
++	qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_PARAM_CTRL_1,
++				     PHY_PARAM_CTRL1_MASK, data);
++
++err_phy_trans:
++	return ret;
++}
++
++static int qcom_dwc3_ss_phy_exit(struct phy *phy)
++{
++	struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy);
++
++	/* Sequence to put SSPHY in low power state:
++	 * 1. Clear REF_PHY_EN in PHY_CTRL_REG
++	 * 2. Clear REF_USE_PAD in PHY_CTRL_REG
++	 * 3. Set TEST_POWERED_DOWN in PHY_CTRL_REG to enable PHY retention
++	 */
++	qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
++		SSUSB_CTRL_SS_PHY_EN, 0x0);
++	qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
++		SSUSB_CTRL_REF_USE_PAD, 0x0);
++	qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
++		SSUSB_CTRL_TEST_POWERDOWN, 0x0);
++
++	clk_disable_unprepare(phy_dwc3->ref_clk);
++	clk_disable_unprepare(phy_dwc3->xo_clk);
++
++	return 0;
++}
++
++static const struct qcom_dwc3_phy_drvdata qcom_dwc3_hs_drvdata = {
++	.ops = {
++		.init		= qcom_dwc3_hs_phy_init,
++		.exit		= qcom_dwc3_hs_phy_exit,
++		.owner		= THIS_MODULE,
++	},
++	.clk_rate = 60000000,
++};
++
++static const struct qcom_dwc3_phy_drvdata qcom_dwc3_ss_drvdata = {
++	.ops = {
++		.init		= qcom_dwc3_ss_phy_init,
++		.exit		= qcom_dwc3_ss_phy_exit,
++		.owner		= THIS_MODULE,
++	},
++	.clk_rate = 125000000,
++};
++
++static const struct of_device_id qcom_dwc3_phy_table[] = {
++	{ .compatible = "qcom,dwc3-hs-usb-phy", .data = &qcom_dwc3_hs_drvdata },
++	{ .compatible = "qcom,dwc3-ss-usb-phy", .data = &qcom_dwc3_ss_drvdata },
++	{ /* Sentinel */ }
++};
++MODULE_DEVICE_TABLE(of, qcom_dwc3_phy_table);
++
++static int qcom_dwc3_phy_probe(struct platform_device *pdev)
++{
++	struct qcom_dwc3_usb_phy	*phy_dwc3;
++	struct phy_provider		*phy_provider;
++	struct phy			*generic_phy;
++	struct resource			*res;
++	const struct of_device_id *match;
++	const struct qcom_dwc3_phy_drvdata *data;
++	struct device_node *np;
++
++	phy_dwc3 = devm_kzalloc(&pdev->dev, sizeof(*phy_dwc3), GFP_KERNEL);
++	if (!phy_dwc3)
++		return -ENOMEM;
++
++	match = of_match_node(qcom_dwc3_phy_table, pdev->dev.of_node);
++	data = match->data;
++
++	phy_dwc3->dev = &pdev->dev;
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	phy_dwc3->base = devm_ioremap_resource(phy_dwc3->dev, res);
++	if (IS_ERR(phy_dwc3->base))
++		return PTR_ERR(phy_dwc3->base);
++
++	phy_dwc3->ref_clk = devm_clk_get(phy_dwc3->dev, "ref");
++	if (IS_ERR(phy_dwc3->ref_clk)) {
++		dev_dbg(phy_dwc3->dev, "cannot get reference clock\n");
++		return PTR_ERR(phy_dwc3->ref_clk);
++	}
++
++	clk_set_rate(phy_dwc3->ref_clk, data->clk_rate);
++
++	phy_dwc3->xo_clk = devm_clk_get(phy_dwc3->dev, "xo");
++	if (IS_ERR(phy_dwc3->xo_clk)) {
++		dev_dbg(phy_dwc3->dev, "cannot get TCXO clock\n");
++		phy_dwc3->xo_clk = NULL;
++	}
++
++	/* Parse device node to probe HSIO settings */
++	np = of_node_get(pdev->dev.of_node);
++	if (!of_compat_cmp(match->compatible, "qcom,dwc3-ss-usb-phy",
++			   strlen(match->compatible))) {
++
++		if (of_property_read_u32(np, "rx_eq", &phy_dwc3->rx_eq) ||
++		    of_property_read_u32(np, "tx_deamp_3_5db",
++					 &phy_dwc3->tx_deamp_3_5db) ||
++		    of_property_read_u32(np, "mpll", &phy_dwc3->mpll)) {
++
++			dev_err(phy_dwc3->dev, "cannot get HSIO settings from device node, using default values\n");
++
++			/* Default HSIO settings */
++			phy_dwc3->rx_eq = SSPHY_RX_EQ_VALUE;
++			phy_dwc3->tx_deamp_3_5db = SSPHY_TX_DEEMPH_3_5DB;
++			phy_dwc3->mpll = SSPHY_MPLL_VALUE;
++		}
++	}
++
++	generic_phy = devm_phy_create(phy_dwc3->dev, pdev->dev.of_node,
++				      &data->ops);
++
++	if (IS_ERR(generic_phy))
++		return PTR_ERR(generic_phy);
++
++	phy_set_drvdata(generic_phy, phy_dwc3);
++	platform_set_drvdata(pdev, phy_dwc3);
++
++	phy_provider = devm_of_phy_provider_register(phy_dwc3->dev,
++			of_phy_simple_xlate);
++
++	if (IS_ERR(phy_provider))
++		return PTR_ERR(phy_provider);
++
++	return 0;
++}
++
++static struct platform_driver qcom_dwc3_phy_driver = {
++	.probe		= qcom_dwc3_phy_probe,
++	.driver		= {
++		.name	= "qcom-dwc3-usb-phy",
++		.owner	= THIS_MODULE,
++		.of_match_table = qcom_dwc3_phy_table,
++	},
++};
++
++module_platform_driver(qcom_dwc3_phy_driver);
++
++MODULE_ALIAS("platform:phy-qcom-dwc3");
++MODULE_LICENSE("GPL v2");
++MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
++MODULE_AUTHOR("Ivan T. Ivanov <iivanov@mm-sol.com>");
++MODULE_DESCRIPTION("DesignWare USB3 QCOM PHY driver");
diff --git a/target/linux/ipq806x/patches-4.14/0033-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch b/target/linux/ipq806x/patches-4.14/0033-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch
new file mode 100644
index 0000000..a6c7953
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0033-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch
@@ -0,0 +1,29 @@
+From 48051ece78136e4235a2415a52797db56f8a4478 Mon Sep 17 00:00:00 2001
+From: Mathieu Olivari <mathieu@codeaurora.org>
+Date: Tue, 21 Apr 2015 19:09:07 -0700
+Subject: [PATCH 33/69] ARM: qcom: automatically select PCI_DOMAINS if PCI is
+ enabled
+
+If multiple PCIe devices are present in the system, the kernel will
+panic at boot time when trying to scan the PCI buses. This happens on
+IPQ806x based platforms, which has 3 PCIe ports.
+
+Enabling this option allows the kernel to assign the pci-domains
+according to the device-tree content. This allows multiple PCIe
+controllers to coexist in the system.
+
+Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
+---
+ arch/arm/mach-qcom/Kconfig | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/arch/arm/mach-qcom/Kconfig
++++ b/arch/arm/mach-qcom/Kconfig
+@@ -6,6 +6,7 @@ menuconfig ARCH_QCOM
+ 	select ARM_AMBA
+ 	select PINCTRL
+ 	select QCOM_SCM if SMP
++	select PCI_DOMAINS if PCI
+ 	help
+ 	  Support for Qualcomm's devicetree based systems.
+ 
diff --git a/target/linux/ipq806x/patches-4.14/0034-ARM-Add-Krait-L2-register-accessor-functions.patch b/target/linux/ipq806x/patches-4.14/0034-ARM-Add-Krait-L2-register-accessor-functions.patch
new file mode 100644
index 0000000..5380f2c
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0034-ARM-Add-Krait-L2-register-accessor-functions.patch
@@ -0,0 +1,147 @@
+From patchwork Fri Dec  8 09:42:19 2017
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [v4,01/12] ARM: Add Krait L2 register accessor functions
+From: Sricharan R <sricharan@codeaurora.org>
+X-Patchwork-Id: 10102101
+Message-Id: <1512726150-7204-2-git-send-email-sricharan@codeaurora.org>
+To: mturquette@baylibre.com, sboyd@codeaurora.org,
+ devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
+ linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
+ viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org
+Cc: sricharan@codeaurora.org, Mark Rutland <mark.rutland@arm.com>,
+ Russell King <linux@arm.linux.org.uk>,
+ Courtney Cavin <courtney.cavin@sonymobile.com>
+Date: Fri,  8 Dec 2017 15:12:19 +0530
+
+From: Stephen Boyd <sboyd@codeaurora.org>
+
+Krait CPUs have a handful of L2 cache controller registers that
+live behind a cp15 based indirection register. First you program
+the indirection register (l2cpselr) to point the L2 'window'
+register (l2cpdr) at what you want to read/write.  Then you
+read/write the 'window' register to do what you want. The
+l2cpselr register is not banked per-cpu so we must lock around
+accesses to it to prevent other CPUs from re-pointing l2cpdr
+underneath us.
+
+Cc: Mark Rutland <mark.rutland@arm.com>
+Cc: Russell King <linux@arm.linux.org.uk>
+Cc: Courtney Cavin <courtney.cavin@sonymobile.com>
+Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
+---
+ arch/arm/common/Kconfig                   |  3 ++
+ arch/arm/common/Makefile                  |  1 +
+ arch/arm/common/krait-l2-accessors.c      | 58 +++++++++++++++++++++++++++++++
+ arch/arm/include/asm/krait-l2-accessors.h | 20 +++++++++++
+ 4 files changed, 82 insertions(+)
+ create mode 100644 arch/arm/common/krait-l2-accessors.c
+ create mode 100644 arch/arm/include/asm/krait-l2-accessors.h
+
+--- a/arch/arm/common/Kconfig
++++ b/arch/arm/common/Kconfig
+@@ -7,6 +7,9 @@ config DMABOUNCE
+ 	bool
+ 	select ZONE_DMA
+ 
++config KRAIT_L2_ACCESSORS
++	bool
++
+ config SHARP_LOCOMO
+ 	bool
+ 
+--- a/arch/arm/common/Makefile
++++ b/arch/arm/common/Makefile
+@@ -7,6 +7,7 @@ obj-y				+= firmware.o
+ 
+ obj-$(CONFIG_SA1111)		+= sa1111.o
+ obj-$(CONFIG_DMABOUNCE)		+= dmabounce.o
++obj-$(CONFIG_KRAIT_L2_ACCESSORS) += krait-l2-accessors.o
+ obj-$(CONFIG_SHARP_LOCOMO)	+= locomo.o
+ obj-$(CONFIG_SHARP_PARAM)	+= sharpsl_param.o
+ obj-$(CONFIG_SHARP_SCOOP)	+= scoop.o
+--- /dev/null
++++ b/arch/arm/common/krait-l2-accessors.c
+@@ -0,0 +1,58 @@
++/*
++ * Copyright (c) 2011-2013, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/spinlock.h>
++#include <linux/export.h>
++
++#include <asm/barrier.h>
++#include <asm/krait-l2-accessors.h>
++
++static DEFINE_RAW_SPINLOCK(krait_l2_lock);
++
++void krait_set_l2_indirect_reg(u32 addr, u32 val)
++{
++	unsigned long flags;
++
++	raw_spin_lock_irqsave(&krait_l2_lock, flags);
++	/*
++	 * Select the L2 window by poking l2cpselr, then write to the window
++	 * via l2cpdr.
++	 */
++	asm volatile ("mcr p15, 3, %0, c15, c0, 6 @ l2cpselr" : : "r" (addr));
++	isb();
++	asm volatile ("mcr p15, 3, %0, c15, c0, 7 @ l2cpdr" : : "r" (val));
++	isb();
++
++	raw_spin_unlock_irqrestore(&krait_l2_lock, flags);
++}
++EXPORT_SYMBOL(krait_set_l2_indirect_reg);
++
++u32 krait_get_l2_indirect_reg(u32 addr)
++{
++	u32 val;
++	unsigned long flags;
++
++	raw_spin_lock_irqsave(&krait_l2_lock, flags);
++	/*
++	 * Select the L2 window by poking l2cpselr, then read from the window
++	 * via l2cpdr.
++	 */
++	asm volatile ("mcr p15, 3, %0, c15, c0, 6 @ l2cpselr" : : "r" (addr));
++	isb();
++	asm volatile ("mrc p15, 3, %0, c15, c0, 7 @ l2cpdr" : "=r" (val));
++
++	raw_spin_unlock_irqrestore(&krait_l2_lock, flags);
++
++	return val;
++}
++EXPORT_SYMBOL(krait_get_l2_indirect_reg);
+--- /dev/null
++++ b/arch/arm/include/asm/krait-l2-accessors.h
+@@ -0,0 +1,20 @@
++/*
++ * Copyright (c) 2011-2013, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++
++#ifndef __ASMARM_KRAIT_L2_ACCESSORS_H
++#define __ASMARM_KRAIT_L2_ACCESSORS_H
++
++extern void krait_set_l2_indirect_reg(u32 addr, u32 val);
++extern u32 krait_get_l2_indirect_reg(u32 addr);
++
++#endif
diff --git a/target/linux/ipq806x/patches-4.14/0035-clk-mux-Split-out-register-accessors-for-reuse.patch b/target/linux/ipq806x/patches-4.14/0035-clk-mux-Split-out-register-accessors-for-reuse.patch
new file mode 100644
index 0000000..0d919ee
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0035-clk-mux-Split-out-register-accessors-for-reuse.patch
@@ -0,0 +1,195 @@
+From patchwork Fri Dec  8 09:42:20 2017
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [v4,02/12] clk: mux: Split out register accessors for reuse
+From: Sricharan R <sricharan@codeaurora.org>
+X-Patchwork-Id: 10102103
+Message-Id: <1512726150-7204-3-git-send-email-sricharan@codeaurora.org>
+To: mturquette@baylibre.com, sboyd@codeaurora.org,
+ devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
+ linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
+ viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org
+Cc: sricharan@codeaurora.org
+Date: Fri,  8 Dec 2017 15:12:20 +0530
+
+From: Stephen Boyd <sboyd@codeaurora.org>
+
+We want to reuse the logic in clk-mux.c for other clock drivers
+that don't use readl as register accessors. Fortunately, there
+really isn't much to the mux code besides the table indirection
+and quirk flags if you assume any bit shifting and masking has
+been done already. Pull that logic out into reusable functions
+that operate on an optional table and some flags so that other
+drivers can use the same logic.
+
+Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
+---
+ drivers/clk/clk-mux.c        | 75 +++++++++++++++++++++++++++-----------------
+ include/linux/clk-provider.h |  9 ++++--
+ 2 files changed, 54 insertions(+), 30 deletions(-)
+
+--- a/drivers/clk/clk-mux.c
++++ b/drivers/clk/clk-mux.c
+@@ -26,35 +26,24 @@
+  * parent - parent is adjustable through clk_set_parent
+  */
+ 
+-static u8 clk_mux_get_parent(struct clk_hw *hw)
++unsigned int clk_mux_get_parent(struct clk_hw *hw, unsigned int val,
++				unsigned int *table, unsigned long flags)
+ {
+-	struct clk_mux *mux = to_clk_mux(hw);
+ 	int num_parents = clk_hw_get_num_parents(hw);
+-	u32 val;
+-
+-	/*
+-	 * FIXME need a mux-specific flag to determine if val is bitwise or numeric
+-	 * e.g. sys_clkin_ck's clksel field is 3 bits wide, but ranges from 0x1
+-	 * to 0x7 (index starts at one)
+-	 * OTOH, pmd_trace_clk_mux_ck uses a separate bit for each clock, so
+-	 * val = 0x4 really means "bit 2, index starts at bit 0"
+-	 */
+-	val = clk_readl(mux->reg) >> mux->shift;
+-	val &= mux->mask;
+ 
+-	if (mux->table) {
++	if (table) {
+ 		int i;
+ 
+ 		for (i = 0; i < num_parents; i++)
+-			if (mux->table[i] == val)
++			if (table[i] == val)
+ 				return i;
+ 		return -EINVAL;
+ 	}
+ 
+-	if (val && (mux->flags & CLK_MUX_INDEX_BIT))
++	if (val && (flags & CLK_MUX_INDEX_BIT))
+ 		val = ffs(val) - 1;
+ 
+-	if (val && (mux->flags & CLK_MUX_INDEX_ONE))
++	if (val && (flags & CLK_MUX_INDEX_ONE))
+ 		val--;
+ 
+ 	if (val >= num_parents)
+@@ -62,23 +51,53 @@ static u8 clk_mux_get_parent(struct clk_
+ 
+ 	return val;
+ }
++EXPORT_SYMBOL_GPL(clk_mux_get_parent);
+ 
+-static int clk_mux_set_parent(struct clk_hw *hw, u8 index)
++static u8 _clk_mux_get_parent(struct clk_hw *hw)
+ {
+ 	struct clk_mux *mux = to_clk_mux(hw);
+ 	u32 val;
+-	unsigned long flags = 0;
+ 
+-	if (mux->table) {
+-		index = mux->table[index];
++	/*
++	 * FIXME need a mux-specific flag to determine if val is bitwise or
++	 * numeric e.g. sys_clkin_ck's clksel field is 3 bits wide,
++	 * but ranges from 0x1 to 0x7 (index starts at one)
++	 * OTOH, pmd_trace_clk_mux_ck uses a separate bit for each clock, so
++	 * val = 0x4 really means "bit 2, index starts at bit 0"
++	 */
++	val = clk_readl(mux->reg) >> mux->shift;
++	val &= mux->mask;
++
++	return clk_mux_get_parent(hw, val, mux->table, mux->flags);
++}
++
++unsigned int clk_mux_reindex(u8 index, unsigned int *table,
++			     unsigned long flags)
++{
++	unsigned int val = index;
++
++	if (table) {
++		val = table[val];
+ 	} else {
+-		if (mux->flags & CLK_MUX_INDEX_BIT)
+-			index = 1 << index;
++		if (flags & CLK_MUX_INDEX_BIT)
++			val = 1 << index;
+ 
+-		if (mux->flags & CLK_MUX_INDEX_ONE)
+-			index++;
++		if (flags & CLK_MUX_INDEX_ONE)
++			val++;
+ 	}
+ 
++	return val;
++}
++EXPORT_SYMBOL_GPL(clk_mux_reindex);
++
++static int clk_mux_set_parent(struct clk_hw *hw, u8 index)
++{
++	struct clk_mux *mux = to_clk_mux(hw);
++	u32 val;
++	unsigned long flags = 0;
++
++	index = clk_mux_reindex(index, mux->table, mux->flags);
++
+ 	if (mux->lock)
+ 		spin_lock_irqsave(mux->lock, flags);
+ 	else
+@@ -102,14 +121,14 @@ static int clk_mux_set_parent(struct clk
+ }
+ 
+ const struct clk_ops clk_mux_ops = {
+-	.get_parent = clk_mux_get_parent,
++	.get_parent = _clk_mux_get_parent,
+ 	.set_parent = clk_mux_set_parent,
+ 	.determine_rate = __clk_mux_determine_rate,
+ };
+ EXPORT_SYMBOL_GPL(clk_mux_ops);
+ 
+ const struct clk_ops clk_mux_ro_ops = {
+-	.get_parent = clk_mux_get_parent,
++	.get_parent = _clk_mux_get_parent,
+ };
+ EXPORT_SYMBOL_GPL(clk_mux_ro_ops);
+ 
+@@ -117,7 +136,7 @@ struct clk_hw *clk_hw_register_mux_table
+ 		const char * const *parent_names, u8 num_parents,
+ 		unsigned long flags,
+ 		void __iomem *reg, u8 shift, u32 mask,
+-		u8 clk_mux_flags, u32 *table, spinlock_t *lock)
++		u8 clk_mux_flags, unsigned int *table, spinlock_t *lock)
+ {
+ 	struct clk_mux *mux;
+ 	struct clk_hw *hw;
+--- a/include/linux/clk-provider.h
++++ b/include/linux/clk-provider.h
+@@ -468,7 +468,7 @@ void clk_hw_unregister_divider(struct cl
+ struct clk_mux {
+ 	struct clk_hw	hw;
+ 	void __iomem	*reg;
+-	u32		*table;
++	unsigned int	*table;
+ 	u32		mask;
+ 	u8		shift;
+ 	u8		flags;
+@@ -486,6 +486,11 @@ struct clk_mux {
+ extern const struct clk_ops clk_mux_ops;
+ extern const struct clk_ops clk_mux_ro_ops;
+ 
++unsigned int clk_mux_get_parent(struct clk_hw *hw, unsigned int val,
++				unsigned int *table, unsigned long flags);
++unsigned int clk_mux_reindex(u8 index, unsigned int *table,
++			     unsigned long flags);
++
+ struct clk *clk_register_mux(struct device *dev, const char *name,
+ 		const char * const *parent_names, u8 num_parents,
+ 		unsigned long flags,
+@@ -506,7 +511,7 @@ struct clk_hw *clk_hw_register_mux_table
+ 		const char * const *parent_names, u8 num_parents,
+ 		unsigned long flags,
+ 		void __iomem *reg, u8 shift, u32 mask,
+-		u8 clk_mux_flags, u32 *table, spinlock_t *lock);
++		u8 clk_mux_flags, unsigned int *table, spinlock_t *lock);
+ 
+ void clk_unregister_mux(struct clk *clk);
+ void clk_hw_unregister_mux(struct clk_hw *hw);
diff --git a/target/linux/ipq806x/patches-4.14/0038-clk-qcom-Add-support-for-High-Frequency-PLLs-HFPLLs.patch b/target/linux/ipq806x/patches-4.14/0038-clk-qcom-Add-support-for-High-Frequency-PLLs-HFPLLs.patch
new file mode 100644
index 0000000..b2834c0
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0038-clk-qcom-Add-support-for-High-Frequency-PLLs-HFPLLs.patch
@@ -0,0 +1,352 @@
+From patchwork Fri Dec  8 09:42:21 2017
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [v4,03/12] clk: qcom: Add support for High-Frequency PLLs (HFPLLs)
+From: Sricharan R <sricharan@codeaurora.org>
+X-Patchwork-Id: 10102083
+Message-Id: <1512726150-7204-4-git-send-email-sricharan@codeaurora.org>
+To: mturquette@baylibre.com, sboyd@codeaurora.org,
+ devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
+ linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
+ viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org
+Cc: sricharan@codeaurora.org
+Date: Fri,  8 Dec 2017 15:12:21 +0530
+
+From: Stephen Boyd <sboyd@codeaurora.org>
+
+HFPLLs are the main frequency source for Krait CPU clocks. Add
+support for changing the rate of these PLLs.
+
+Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
+---
+ drivers/clk/qcom/Makefile    |   1 +
+ drivers/clk/qcom/clk-hfpll.c | 253 +++++++++++++++++++++++++++++++++++++++++++
+ drivers/clk/qcom/clk-hfpll.h |  54 +++++++++
+ 3 files changed, 308 insertions(+)
+ create mode 100644 drivers/clk/qcom/clk-hfpll.c
+ create mode 100644 drivers/clk/qcom/clk-hfpll.h
+
+--- a/drivers/clk/qcom/Makefile
++++ b/drivers/clk/qcom/Makefile
+@@ -10,6 +10,7 @@ clk-qcom-y += clk-rcg2.o
+ clk-qcom-y += clk-branch.o
+ clk-qcom-y += clk-regmap-divider.o
+ clk-qcom-y += clk-regmap-mux.o
++clk-qcom-y += clk-hfpll.o
+ clk-qcom-y += reset.o
+ clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o
+ 
+--- /dev/null
++++ b/drivers/clk/qcom/clk-hfpll.c
+@@ -0,0 +1,253 @@
++/*
++ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++#include <linux/kernel.h>
++#include <linux/export.h>
++#include <linux/regmap.h>
++#include <linux/delay.h>
++#include <linux/err.h>
++#include <linux/clk-provider.h>
++#include <linux/spinlock.h>
++
++#include "clk-regmap.h"
++#include "clk-hfpll.h"
++
++#define PLL_OUTCTRL	BIT(0)
++#define PLL_BYPASSNL	BIT(1)
++#define PLL_RESET_N	BIT(2)
++
++/* Initialize a HFPLL at a given rate and enable it. */
++static void __clk_hfpll_init_once(struct clk_hw *hw)
++{
++	struct clk_hfpll *h = to_clk_hfpll(hw);
++	struct hfpll_data const *hd = h->d;
++	struct regmap *regmap = h->clkr.regmap;
++
++	if (likely(h->init_done))
++		return;
++
++	/* Configure PLL parameters for integer mode. */
++	if (hd->config_val)
++		regmap_write(regmap, hd->config_reg, hd->config_val);
++	regmap_write(regmap, hd->m_reg, 0);
++	regmap_write(regmap, hd->n_reg, 1);
++
++	if (hd->user_reg) {
++		u32 regval = hd->user_val;
++		unsigned long rate;
++
++		rate = clk_hw_get_rate(hw);
++
++		/* Pick the right VCO. */
++		if (hd->user_vco_mask && rate > hd->low_vco_max_rate)
++			regval |= hd->user_vco_mask;
++		regmap_write(regmap, hd->user_reg, regval);
++	}
++
++	if (hd->droop_reg)
++		regmap_write(regmap, hd->droop_reg, hd->droop_val);
++
++	h->init_done = true;
++}
++
++static void __clk_hfpll_enable(struct clk_hw *hw)
++{
++	struct clk_hfpll *h = to_clk_hfpll(hw);
++	struct hfpll_data const *hd = h->d;
++	struct regmap *regmap = h->clkr.regmap;
++	u32 val;
++
++	__clk_hfpll_init_once(hw);
++
++	/* Disable PLL bypass mode. */
++	regmap_update_bits(regmap, hd->mode_reg, PLL_BYPASSNL, PLL_BYPASSNL);
++
++	/*
++	 * H/W requires a 5us delay between disabling the bypass and
++	 * de-asserting the reset. Delay 10us just to be safe.
++	 */
++	usleep_range(10, 100);
++
++	/* De-assert active-low PLL reset. */
++	regmap_update_bits(regmap, hd->mode_reg, PLL_RESET_N, PLL_RESET_N);
++
++	/* Wait for PLL to lock. */
++	if (hd->status_reg) {
++		do {
++			regmap_read(regmap, hd->status_reg, &val);
++		} while (!(val & BIT(hd->lock_bit)));
++	} else {
++		usleep_range(60, 100);
++	}
++
++	/* Enable PLL output. */
++	regmap_update_bits(regmap, hd->mode_reg, PLL_OUTCTRL, PLL_OUTCTRL);
++}
++
++/* Enable an already-configured HFPLL. */
++static int clk_hfpll_enable(struct clk_hw *hw)
++{
++	unsigned long flags;
++	struct clk_hfpll *h = to_clk_hfpll(hw);
++	struct hfpll_data const *hd = h->d;
++	struct regmap *regmap = h->clkr.regmap;
++	u32 mode;
++
++	spin_lock_irqsave(&h->lock, flags);
++	regmap_read(regmap, hd->mode_reg, &mode);
++	if (!(mode & (PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL)))
++		__clk_hfpll_enable(hw);
++	spin_unlock_irqrestore(&h->lock, flags);
++
++	return 0;
++}
++
++static void __clk_hfpll_disable(struct clk_hfpll *h)
++{
++	struct hfpll_data const *hd = h->d;
++	struct regmap *regmap = h->clkr.regmap;
++
++	/*
++	 * Disable the PLL output, disable test mode, enable the bypass mode,
++	 * and assert the reset.
++	 */
++	regmap_update_bits(regmap, hd->mode_reg,
++			   PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL, 0);
++}
++
++static void clk_hfpll_disable(struct clk_hw *hw)
++{
++	struct clk_hfpll *h = to_clk_hfpll(hw);
++	unsigned long flags;
++
++	spin_lock_irqsave(&h->lock, flags);
++	__clk_hfpll_disable(h);
++	spin_unlock_irqrestore(&h->lock, flags);
++}
++
++static long clk_hfpll_round_rate(struct clk_hw *hw, unsigned long rate,
++				 unsigned long *parent_rate)
++{
++	struct clk_hfpll *h = to_clk_hfpll(hw);
++	struct hfpll_data const *hd = h->d;
++	unsigned long rrate;
++
++	rate = clamp(rate, hd->min_rate, hd->max_rate);
++
++	rrate = DIV_ROUND_UP(rate, *parent_rate) * *parent_rate;
++	if (rrate > hd->max_rate)
++		rrate -= *parent_rate;
++
++	return rrate;
++}
++
++/*
++ * For optimization reasons, assumes no downstream clocks are actively using
++ * it.
++ */
++static int clk_hfpll_set_rate(struct clk_hw *hw, unsigned long rate,
++			      unsigned long parent_rate)
++{
++	struct clk_hfpll *h = to_clk_hfpll(hw);
++	struct hfpll_data const *hd = h->d;
++	struct regmap *regmap = h->clkr.regmap;
++	unsigned long flags;
++	u32 l_val, val;
++	bool enabled;
++
++	l_val = rate / parent_rate;
++
++	spin_lock_irqsave(&h->lock, flags);
++
++	enabled = __clk_is_enabled(hw->clk);
++	if (enabled)
++		__clk_hfpll_disable(h);
++
++	/* Pick the right VCO. */
++	if (hd->user_reg && hd->user_vco_mask) {
++		regmap_read(regmap, hd->user_reg, &val);
++		if (rate <= hd->low_vco_max_rate)
++			val &= ~hd->user_vco_mask;
++		else
++			val |= hd->user_vco_mask;
++		regmap_write(regmap, hd->user_reg, val);
++	}
++
++	regmap_write(regmap, hd->l_reg, l_val);
++
++	if (enabled)
++		__clk_hfpll_enable(hw);
++
++	spin_unlock_irqrestore(&h->lock, flags);
++
++	return 0;
++}
++
++static unsigned long clk_hfpll_recalc_rate(struct clk_hw *hw,
++					   unsigned long parent_rate)
++{
++	struct clk_hfpll *h = to_clk_hfpll(hw);
++	struct hfpll_data const *hd = h->d;
++	struct regmap *regmap = h->clkr.regmap;
++	u32 l_val;
++
++	regmap_read(regmap, hd->l_reg, &l_val);
++
++	return l_val * parent_rate;
++}
++
++static void clk_hfpll_init(struct clk_hw *hw)
++{
++	struct clk_hfpll *h = to_clk_hfpll(hw);
++	struct hfpll_data const *hd = h->d;
++	struct regmap *regmap = h->clkr.regmap;
++	u32 mode, status;
++
++	regmap_read(regmap, hd->mode_reg, &mode);
++	if (mode != (PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL)) {
++		__clk_hfpll_init_once(hw);
++		return;
++	}
++
++	if (hd->status_reg) {
++		regmap_read(regmap, hd->status_reg, &status);
++		if (!(status & BIT(hd->lock_bit))) {
++			WARN(1, "HFPLL %s is ON, but not locked!\n",
++			     __clk_get_name(hw->clk));
++			clk_hfpll_disable(hw);
++			__clk_hfpll_init_once(hw);
++		}
++	}
++}
++
++static int hfpll_is_enabled(struct clk_hw *hw)
++{
++	struct clk_hfpll *h = to_clk_hfpll(hw);
++	struct hfpll_data const *hd = h->d;
++	struct regmap *regmap = h->clkr.regmap;
++	u32 mode;
++
++	regmap_read(regmap, hd->mode_reg, &mode);
++	mode &= 0x7;
++	return mode == (PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL);
++}
++
++const struct clk_ops clk_ops_hfpll = {
++	.enable = clk_hfpll_enable,
++	.disable = clk_hfpll_disable,
++	.is_enabled = hfpll_is_enabled,
++	.round_rate = clk_hfpll_round_rate,
++	.set_rate = clk_hfpll_set_rate,
++	.recalc_rate = clk_hfpll_recalc_rate,
++	.init = clk_hfpll_init,
++};
++EXPORT_SYMBOL_GPL(clk_ops_hfpll);
+--- /dev/null
++++ b/drivers/clk/qcom/clk-hfpll.h
+@@ -0,0 +1,54 @@
++/*
++ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++#ifndef __QCOM_CLK_HFPLL_H__
++#define __QCOM_CLK_HFPLL_H__
++
++#include <linux/clk-provider.h>
++#include <linux/spinlock.h>
++#include "clk-regmap.h"
++
++struct hfpll_data {
++	u32 mode_reg;
++	u32 l_reg;
++	u32 m_reg;
++	u32 n_reg;
++	u32 user_reg;
++	u32 droop_reg;
++	u32 config_reg;
++	u32 status_reg;
++	u8  lock_bit;
++
++	u32 droop_val;
++	u32 config_val;
++	u32 user_val;
++	u32 user_vco_mask;
++	unsigned long low_vco_max_rate;
++
++	unsigned long min_rate;
++	unsigned long max_rate;
++};
++
++struct clk_hfpll {
++	struct hfpll_data const *d;
++	int init_done;
++
++	struct clk_regmap clkr;
++	spinlock_t lock;
++};
++
++#define to_clk_hfpll(_hw) \
++	container_of(to_clk_regmap(_hw), struct clk_hfpll, clkr)
++
++extern const struct clk_ops clk_ops_hfpll;
++
++#endif
diff --git a/target/linux/ipq806x/patches-4.14/0039-clk-qcom-Add-HFPLL-driver.patch b/target/linux/ipq806x/patches-4.14/0039-clk-qcom-Add-HFPLL-driver.patch
new file mode 100644
index 0000000..884d564
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0039-clk-qcom-Add-HFPLL-driver.patch
@@ -0,0 +1,206 @@
+From patchwork Fri Dec  8 09:42:22 2017
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [v4,04/12] clk: qcom: Add HFPLL driver
+From: Sricharan R <sricharan@codeaurora.org>
+X-Patchwork-Id: 10102079
+Message-Id: <1512726150-7204-5-git-send-email-sricharan@codeaurora.org>
+To: mturquette@baylibre.com, sboyd@codeaurora.org,
+ devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
+ linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
+ viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org
+Cc: sricharan@codeaurora.org
+Date: Fri,  8 Dec 2017 15:12:22 +0530
+
+From: Stephen Boyd <sboyd@codeaurora.org>
+
+On some devices (MSM8974 for example), the HFPLLs are
+instantiated within the Krait processor subsystem as separate
+register regions. Add a driver for these PLLs so that we can
+provide HFPLL clocks for use by the system.
+
+Cc: <devicetree@vger.kernel.org>
+Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
+---
+ .../devicetree/bindings/clock/qcom,hfpll.txt       |  40 ++++++++
+ drivers/clk/qcom/Kconfig                           |   8 ++
+ drivers/clk/qcom/Makefile                          |   1 +
+ drivers/clk/qcom/hfpll.c                           | 106 +++++++++++++++++++++
+ 4 files changed, 155 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/clock/qcom,hfpll.txt
+ create mode 100644 drivers/clk/qcom/hfpll.c
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/clock/qcom,hfpll.txt
+@@ -0,0 +1,40 @@
++High-Frequency PLL (HFPLL)
++
++PROPERTIES
++
++- compatible:
++	Usage: required
++	Value type: <string>
++	Definition: must be "qcom,hfpll"
++
++- reg:
++	Usage: required
++	Value type: <prop-encoded-array>
++	Definition: address and size of HPLL registers. An optional second
++		    element specifies the address and size of the alias
++		    register region.
++
++- clock-output-names:
++	Usage: required
++	Value type: <string>
++	Definition: Name of the PLL. Typically hfpllX where X is a CPU number
++		    starting at 0. Otherwise hfpll_Y where Y is more specific
++		    such as "l2".
++
++Example:
++
++1) An HFPLL for the L2 cache.
++
++	clock-controller@f9016000 {
++		compatible = "qcom,hfpll";
++		reg = <0xf9016000 0x30>;
++		clock-output-names = "hfpll_l2";
++	};
++
++2) An HFPLL for CPU0. This HFPLL has the alias register region.
++
++	clock-controller@f908a000 {
++		compatible = "qcom,hfpll";
++		reg = <0xf908a000 0x30>, <0xf900a000 0x30>;
++		clock-output-names = "hfpll0";
++	};
+--- a/drivers/clk/qcom/Kconfig
++++ b/drivers/clk/qcom/Kconfig
+@@ -196,3 +196,11 @@ config MSM_MMCC_8996
+ 	  Support for the multimedia clock controller on msm8996 devices.
+ 	  Say Y if you want to support multimedia devices such as display,
+ 	  graphics, video encode/decode, camera, etc.
++
++config QCOM_HFPLL
++	tristate "High-Frequency PLL (HFPLL) Clock Controller"
++	depends on COMMON_CLK_QCOM
++	help
++	  Support for the high-frequency PLLs present on Qualcomm devices.
++	  Say Y if you want to support CPU frequency scaling on devices
++	  such as MSM8974, APQ8084, etc.
+--- a/drivers/clk/qcom/Makefile
++++ b/drivers/clk/qcom/Makefile
+@@ -35,3 +35,4 @@ obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8
+ obj-$(CONFIG_MSM_MMCC_8996) += mmcc-msm8996.o
+ obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o
+ obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
++obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
+--- /dev/null
++++ b/drivers/clk/qcom/hfpll.c
+@@ -0,0 +1,106 @@
++/*
++ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/of.h>
++#include <linux/clk.h>
++#include <linux/clk-provider.h>
++#include <linux/regmap.h>
++
++#include "clk-regmap.h"
++#include "clk-hfpll.h"
++
++static const struct hfpll_data hdata = {
++	.mode_reg = 0x00,
++	.l_reg = 0x04,
++	.m_reg = 0x08,
++	.n_reg = 0x0c,
++	.user_reg = 0x10,
++	.config_reg = 0x14,
++	.config_val = 0x430405d,
++	.status_reg = 0x1c,
++	.lock_bit = 16,
++
++	.user_val = 0x8,
++	.user_vco_mask = 0x100000,
++	.low_vco_max_rate = 1248000000,
++	.min_rate = 537600000UL,
++	.max_rate = 2900000000UL,
++};
++
++static const struct of_device_id qcom_hfpll_match_table[] = {
++	{ .compatible = "qcom,hfpll" },
++	{ }
++};
++MODULE_DEVICE_TABLE(of, qcom_hfpll_match_table);
++
++static const struct regmap_config hfpll_regmap_config = {
++	.reg_bits	= 32,
++	.reg_stride	= 4,
++	.val_bits	= 32,
++	.max_register	= 0x30,
++	.fast_io	= true,
++};
++
++static int qcom_hfpll_probe(struct platform_device *pdev)
++{
++	struct resource *res;
++	struct device *dev = &pdev->dev;
++	void __iomem *base;
++	struct regmap *regmap;
++	struct clk_hfpll *h;
++	struct clk_init_data init = {
++		.parent_names = (const char *[]){ "xo" },
++		.num_parents = 1,
++		.ops = &clk_ops_hfpll,
++	};
++
++	h = devm_kzalloc(dev, sizeof(*h), GFP_KERNEL);
++	if (!h)
++		return -ENOMEM;
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	base = devm_ioremap_resource(dev, res);
++	if (IS_ERR(base))
++		return PTR_ERR(base);
++
++	regmap = devm_regmap_init_mmio(&pdev->dev, base, &hfpll_regmap_config);
++	if (IS_ERR(regmap))
++		return PTR_ERR(regmap);
++
++	if (of_property_read_string_index(dev->of_node, "clock-output-names",
++					  0, &init.name))
++		return -ENODEV;
++
++	h->d = &hdata;
++	h->clkr.hw.init = &init;
++	spin_lock_init(&h->lock);
++
++	return devm_clk_register_regmap(&pdev->dev, &h->clkr);
++}
++
++static struct platform_driver qcom_hfpll_driver = {
++	.probe		= qcom_hfpll_probe,
++	.driver		= {
++		.name	= "qcom-hfpll",
++		.of_match_table = qcom_hfpll_match_table,
++	},
++};
++module_platform_driver(qcom_hfpll_driver);
++
++MODULE_DESCRIPTION("QCOM HFPLL Clock Driver");
++MODULE_LICENSE("GPL v2");
++MODULE_ALIAS("platform:qcom-hfpll");
diff --git a/target/linux/ipq806x/patches-4.14/0040-clk-qcom-Add-IPQ806X-s-HFPLLs.patch b/target/linux/ipq806x/patches-4.14/0040-clk-qcom-Add-IPQ806X-s-HFPLLs.patch
new file mode 100644
index 0000000..c3af0fa
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0040-clk-qcom-Add-IPQ806X-s-HFPLLs.patch
@@ -0,0 +1,129 @@
+From patchwork Fri Dec  8 09:42:24 2017
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [v4,06/12] clk: qcom: Add IPQ806X's HFPLLs
+From: Sricharan R <sricharan@codeaurora.org>
+X-Patchwork-Id: 10102047
+Message-Id: <1512726150-7204-7-git-send-email-sricharan@codeaurora.org>
+To: mturquette@baylibre.com, sboyd@codeaurora.org,
+ devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
+ linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
+ viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org
+Cc: sricharan@codeaurora.org
+Date: Fri,  8 Dec 2017 15:12:24 +0530
+
+From: Stephen Boyd <sboyd@codeaurora.org>
+
+Describe the HFPLLs present on IPQ806X devices.
+
+Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
+---
+ drivers/clk/qcom/gcc-ipq806x.c | 82 ++++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 82 insertions(+)
+
+--- a/drivers/clk/qcom/gcc-ipq806x.c
++++ b/drivers/clk/qcom/gcc-ipq806x.c
+@@ -30,6 +30,7 @@
+ #include "clk-pll.h"
+ #include "clk-rcg.h"
+ #include "clk-branch.h"
++#include "clk-hfpll.h"
+ #include "reset.h"
+ 
+ static struct clk_pll pll0 = {
+@@ -113,6 +114,84 @@ static struct clk_regmap pll8_vote = {
+ 	},
+ };
+ 
++static struct hfpll_data hfpll0_data = {
++	.mode_reg = 0x3200,
++	.l_reg = 0x3208,
++	.m_reg = 0x320c,
++	.n_reg = 0x3210,
++	.config_reg = 0x3204,
++	.status_reg = 0x321c,
++	.config_val = 0x7845c665,
++	.droop_reg = 0x3214,
++	.droop_val = 0x0108c000,
++	.min_rate = 600000000UL,
++	.max_rate = 1800000000UL,
++};
++
++static struct clk_hfpll hfpll0 = {
++	.d = &hfpll0_data,
++	.clkr.hw.init = &(struct clk_init_data){
++		.parent_names = (const char *[]){ "pxo" },
++		.num_parents = 1,
++		.name = "hfpll0",
++		.ops = &clk_ops_hfpll,
++		.flags = CLK_IGNORE_UNUSED,
++	},
++	.lock = __SPIN_LOCK_UNLOCKED(hfpll0.lock),
++};
++
++static struct hfpll_data hfpll1_data = {
++	.mode_reg = 0x3240,
++	.l_reg = 0x3248,
++	.m_reg = 0x324c,
++	.n_reg = 0x3250,
++	.config_reg = 0x3244,
++	.status_reg = 0x325c,
++	.config_val = 0x7845c665,
++	.droop_reg = 0x3314,
++	.droop_val = 0x0108c000,
++	.min_rate = 600000000UL,
++	.max_rate = 1800000000UL,
++};
++
++static struct clk_hfpll hfpll1 = {
++	.d = &hfpll1_data,
++	.clkr.hw.init = &(struct clk_init_data){
++		.parent_names = (const char *[]){ "pxo" },
++		.num_parents = 1,
++		.name = "hfpll1",
++		.ops = &clk_ops_hfpll,
++		.flags = CLK_IGNORE_UNUSED,
++	},
++	.lock = __SPIN_LOCK_UNLOCKED(hfpll1.lock),
++};
++
++static struct hfpll_data hfpll_l2_data = {
++	.mode_reg = 0x3300,
++	.l_reg = 0x3308,
++	.m_reg = 0x330c,
++	.n_reg = 0x3310,
++	.config_reg = 0x3304,
++	.status_reg = 0x331c,
++	.config_val = 0x7845c665,
++	.droop_reg = 0x3314,
++	.droop_val = 0x0108c000,
++	.min_rate = 600000000UL,
++	.max_rate = 1800000000UL,
++};
++
++static struct clk_hfpll hfpll_l2 = {
++	.d = &hfpll_l2_data,
++	.clkr.hw.init = &(struct clk_init_data){
++		.parent_names = (const char *[]){ "pxo" },
++		.num_parents = 1,
++		.name = "hfpll_l2",
++		.ops = &clk_ops_hfpll,
++		.flags = CLK_IGNORE_UNUSED,
++	},
++	.lock = __SPIN_LOCK_UNLOCKED(hfpll_l2.lock),
++};
++
+ static struct clk_pll pll14 = {
+ 	.l_reg = 0x31c4,
+ 	.m_reg = 0x31c8,
+@@ -2801,6 +2880,9 @@ static struct clk_regmap *gcc_ipq806x_cl
+ 	[UBI32_CORE2_CLK_SRC] = &ubi32_core2_src_clk.clkr,
+ 	[NSSTCM_CLK_SRC] = &nss_tcm_src.clkr,
+ 	[NSSTCM_CLK] = &nss_tcm_clk.clkr,
++	[PLL9] = &hfpll0.clkr,
++	[PLL10] = &hfpll1.clkr,
++	[PLL12] = &hfpll_l2.clkr,
+ };
+ 
+ static const struct qcom_reset_map gcc_ipq806x_resets[] = {
diff --git a/target/linux/ipq806x/patches-4.14/0041-clk-qcom-Add-support-for-Krait-clocks.patch b/target/linux/ipq806x/patches-4.14/0041-clk-qcom-Add-support-for-Krait-clocks.patch
new file mode 100644
index 0000000..5896ab3
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0041-clk-qcom-Add-support-for-Krait-clocks.patch
@@ -0,0 +1,241 @@
+From patchwork Fri Dec  8 09:42:25 2017
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [v4,07/12] clk: qcom: Add support for Krait clocks
+From: Sricharan R <sricharan@codeaurora.org>
+X-Patchwork-Id: 10102051
+Message-Id: <1512726150-7204-8-git-send-email-sricharan@codeaurora.org>
+To: mturquette@baylibre.com, sboyd@codeaurora.org,
+ devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
+ linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
+ viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org
+Cc: sricharan@codeaurora.org
+Date: Fri,  8 Dec 2017 15:12:25 +0530
+
+From: Stephen Boyd <sboyd@codeaurora.org>
+
+The Krait clocks are made up of a series of muxes and a divider
+that choose between a fixed rate clock and dedicated HFPLLs for
+each CPU. Instead of using mmio accesses to remux parents, the
+Krait implementation exposes the remux control via cp15
+registers. Support these clocks.
+
+Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
+---
+ drivers/clk/qcom/Kconfig     |   4 ++
+ drivers/clk/qcom/Makefile    |   1 +
+ drivers/clk/qcom/clk-krait.c | 134 +++++++++++++++++++++++++++++++++++++++++++
+ drivers/clk/qcom/clk-krait.h |  48 ++++++++++++++++
+ 4 files changed, 187 insertions(+)
+ create mode 100644 drivers/clk/qcom/clk-krait.c
+ create mode 100644 drivers/clk/qcom/clk-krait.h
+
+--- a/drivers/clk/qcom/Kconfig
++++ b/drivers/clk/qcom/Kconfig
+@@ -204,3 +204,7 @@ config QCOM_HFPLL
+ 	  Support for the high-frequency PLLs present on Qualcomm devices.
+ 	  Say Y if you want to support CPU frequency scaling on devices
+ 	  such as MSM8974, APQ8084, etc.
++
++config KRAIT_CLOCKS
++	bool
++	select KRAIT_L2_ACCESSORS
+--- a/drivers/clk/qcom/Makefile
++++ b/drivers/clk/qcom/Makefile
+@@ -10,6 +10,7 @@ clk-qcom-y += clk-rcg2.o
+ clk-qcom-y += clk-branch.o
+ clk-qcom-y += clk-regmap-divider.o
+ clk-qcom-y += clk-regmap-mux.o
++clk-qcom-$(CONFIG_KRAIT_CLOCKS) += clk-krait.o
+ clk-qcom-y += clk-hfpll.o
+ clk-qcom-y += reset.o
+ clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o
+--- /dev/null
++++ b/drivers/clk/qcom/clk-krait.c
+@@ -0,0 +1,134 @@
++/*
++ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/io.h>
++#include <linux/delay.h>
++#include <linux/err.h>
++#include <linux/clk-provider.h>
++#include <linux/spinlock.h>
++
++#include <asm/krait-l2-accessors.h>
++
++#include "clk-krait.h"
++
++/* Secondary and primary muxes share the same cp15 register */
++static DEFINE_SPINLOCK(krait_clock_reg_lock);
++
++#define LPL_SHIFT	8
++static void __krait_mux_set_sel(struct krait_mux_clk *mux, int sel)
++{
++	unsigned long flags;
++	u32 regval;
++
++	spin_lock_irqsave(&krait_clock_reg_lock, flags);
++	regval = krait_get_l2_indirect_reg(mux->offset);
++	regval &= ~(mux->mask << mux->shift);
++	regval |= (sel & mux->mask) << mux->shift;
++	if (mux->lpl) {
++		regval &= ~(mux->mask << (mux->shift + LPL_SHIFT));
++		regval |= (sel & mux->mask) << (mux->shift + LPL_SHIFT);
++	}
++	krait_set_l2_indirect_reg(mux->offset, regval);
++	spin_unlock_irqrestore(&krait_clock_reg_lock, flags);
++
++	/* Wait for switch to complete. */
++	mb();
++	udelay(1);
++}
++
++static int krait_mux_set_parent(struct clk_hw *hw, u8 index)
++{
++	struct krait_mux_clk *mux = to_krait_mux_clk(hw);
++	u32 sel;
++
++	sel = clk_mux_reindex(index, mux->parent_map, 0);
++	mux->en_mask = sel;
++	/* Don't touch mux if CPU is off as it won't work */
++	if (__clk_is_enabled(hw->clk))
++		__krait_mux_set_sel(mux, sel);
++
++	return 0;
++}
++
++static u8 krait_mux_get_parent(struct clk_hw *hw)
++{
++	struct krait_mux_clk *mux = to_krait_mux_clk(hw);
++	u32 sel;
++
++	sel = krait_get_l2_indirect_reg(mux->offset);
++	sel >>= mux->shift;
++	sel &= mux->mask;
++	mux->en_mask = sel;
++
++	return clk_mux_get_parent(hw, sel, mux->parent_map, 0);
++}
++
++const struct clk_ops krait_mux_clk_ops = {
++	.set_parent = krait_mux_set_parent,
++	.get_parent = krait_mux_get_parent,
++	.determine_rate = __clk_mux_determine_rate_closest,
++};
++EXPORT_SYMBOL_GPL(krait_mux_clk_ops);
++
++/* The divider can divide by 2, 4, 6 and 8. But we only really need div-2. */
++static long krait_div2_round_rate(struct clk_hw *hw, unsigned long rate,
++				  unsigned long *parent_rate)
++{
++	*parent_rate = clk_hw_round_rate(clk_hw_get_parent(hw), rate * 2);
++	return DIV_ROUND_UP(*parent_rate, 2);
++}
++
++static int krait_div2_set_rate(struct clk_hw *hw, unsigned long rate,
++			       unsigned long parent_rate)
++{
++	struct krait_div2_clk *d = to_krait_div2_clk(hw);
++	unsigned long flags;
++	u32 val;
++	u32 mask = BIT(d->width) - 1;
++
++	if (d->lpl)
++		mask = mask << (d->shift + LPL_SHIFT) | mask << d->shift;
++
++	spin_lock_irqsave(&krait_clock_reg_lock, flags);
++	val = krait_get_l2_indirect_reg(d->offset);
++	val &= ~mask;
++	krait_set_l2_indirect_reg(d->offset, val);
++	spin_unlock_irqrestore(&krait_clock_reg_lock, flags);
++
++	return 0;
++}
++
++static unsigned long
++krait_div2_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
++{
++	struct krait_div2_clk *d = to_krait_div2_clk(hw);
++	u32 mask = BIT(d->width) - 1;
++	u32 div;
++
++	div = krait_get_l2_indirect_reg(d->offset);
++	div >>= d->shift;
++	div &= mask;
++	div = (div + 1) * 2;
++
++	return DIV_ROUND_UP(parent_rate, div);
++}
++
++const struct clk_ops krait_div2_clk_ops = {
++	.round_rate = krait_div2_round_rate,
++	.set_rate = krait_div2_set_rate,
++	.recalc_rate = krait_div2_recalc_rate,
++};
++EXPORT_SYMBOL_GPL(krait_div2_clk_ops);
+--- /dev/null
++++ b/drivers/clk/qcom/clk-krait.h
+@@ -0,0 +1,48 @@
++/*
++ * Copyright (c) 2013, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++
++#ifndef __QCOM_CLK_KRAIT_H
++#define __QCOM_CLK_KRAIT_H
++
++#include <linux/clk-provider.h>
++
++struct krait_mux_clk {
++	unsigned int	*parent_map;
++	u32		offset;
++	u32		mask;
++	u32		shift;
++	u32		en_mask;
++	bool		lpl;
++
++	struct clk_hw	hw;
++	struct notifier_block   clk_nb;
++};
++
++#define to_krait_mux_clk(_hw) container_of(_hw, struct krait_mux_clk, hw)
++
++extern const struct clk_ops krait_mux_clk_ops;
++
++struct krait_div2_clk {
++	u32		offset;
++	u8		width;
++	u32		shift;
++	bool		lpl;
++
++	struct clk_hw	hw;
++};
++
++#define to_krait_div2_clk(_hw) container_of(_hw, struct krait_div2_clk, hw)
++
++extern const struct clk_ops krait_div2_clk_ops;
++
++#endif
diff --git a/target/linux/ipq806x/patches-4.14/0042-clk-qcom-Add-KPSS-ACC-GCC-driver.patch b/target/linux/ipq806x/patches-4.14/0042-clk-qcom-Add-KPSS-ACC-GCC-driver.patch
new file mode 100644
index 0000000..93c86eb
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0042-clk-qcom-Add-KPSS-ACC-GCC-driver.patch
@@ -0,0 +1,209 @@
+From patchwork Fri Dec  8 09:42:26 2017
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [v4,08/12] clk: qcom: Add KPSS ACC/GCC driver
+From: Sricharan R <sricharan@codeaurora.org>
+X-Patchwork-Id: 10102023
+Message-Id: <1512726150-7204-9-git-send-email-sricharan@codeaurora.org>
+To: mturquette@baylibre.com, sboyd@codeaurora.org,
+ devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
+ linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
+ viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org
+Cc: sricharan@codeaurora.org
+Date: Fri,  8 Dec 2017 15:12:26 +0530
+
+From: Stephen Boyd <sboyd@codeaurora.org>
+
+The ACC and GCC regions present in KPSSv1 contain registers to
+control clocks and power to each Krait CPU and L2. For CPUfreq
+purposes probe these devices and expose a mux clock that chooses
+between PXO and PLL8.
+
+Cc: <devicetree@vger.kernel.org>
+Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
+---
+ .../devicetree/bindings/arm/msm/qcom,kpss-acc.txt  |  7 ++
+ .../devicetree/bindings/arm/msm/qcom,kpss-gcc.txt  | 28 +++++++
+ drivers/clk/qcom/Kconfig                           |  8 ++
+ drivers/clk/qcom/Makefile                          |  1 +
+ drivers/clk/qcom/kpss-xcc.c                        | 96 ++++++++++++++++++++++
+ 5 files changed, 140 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,kpss-gcc.txt
+ create mode 100644 drivers/clk/qcom/kpss-xcc.c
+
+--- a/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt
++++ b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt
+@@ -21,10 +21,17 @@ PROPERTIES
+ 		    the register region. An optional second element specifies
+ 		    the base address and size of the alias register region.
+ 
++- clock-output-names:
++	Usage: optional
++	Value type: <string>
++	Definition: Name of the output clock. Typically acpuX_aux where X is a
++		    CPU number starting at 0.
++
+ Example:
+ 
+ 	clock-controller@2088000 {
+ 		compatible = "qcom,kpss-acc-v2";
+ 		reg = <0x02088000 0x1000>,
+ 		      <0x02008000 0x1000>;
++		clock-output-names = "acpu0_aux";
+ 	};
+--- /dev/null
++++ b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-gcc.txt
+@@ -0,0 +1,28 @@
++Krait Processor Sub-system (KPSS) Global Clock Controller (GCC)
++
++PROPERTIES
++
++- compatible:
++	Usage: required
++	Value type: <string>
++	Definition: should be one of:
++			"qcom,kpss-gcc"
++
++- reg:
++	Usage: required
++	Value type: <prop-encoded-array>
++	Definition: base address and size of the register region
++
++- clock-output-names:
++	Usage: required
++	Value type: <string>
++	Definition: Name of the output clock. Typically acpu_l2_aux indicating
++		    an L2 cache auxiliary clock.
++
++Example:
++
++	l2cc: clock-controller@2011000 {
++		compatible = "qcom,kpss-gcc";
++		reg = <0x2011000 0x1000>;
++		clock-output-names = "acpu_l2_aux";
++	};
+--- a/drivers/clk/qcom/Kconfig
++++ b/drivers/clk/qcom/Kconfig
+@@ -205,6 +205,14 @@ config QCOM_HFPLL
+ 	  Say Y if you want to support CPU frequency scaling on devices
+ 	  such as MSM8974, APQ8084, etc.
+ 
++config KPSS_XCC
++	tristate "KPSS Clock Controller"
++	depends on COMMON_CLK_QCOM
++	help
++	  Support for the Krait ACC and GCC clock controllers. Say Y
++	  if you want to support CPU frequency scaling on devices such
++	  as MSM8960, APQ8064, etc.
++
+ config KRAIT_CLOCKS
+ 	bool
+ 	select KRAIT_L2_ACCESSORS
+--- a/drivers/clk/qcom/Makefile
++++ b/drivers/clk/qcom/Makefile
+@@ -36,4 +36,5 @@ obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8
+ obj-$(CONFIG_MSM_MMCC_8996) += mmcc-msm8996.o
+ obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o
+ obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
++obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o
+ obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
+--- /dev/null
++++ b/drivers/clk/qcom/kpss-xcc.c
+@@ -0,0 +1,96 @@
++/* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/err.h>
++#include <linux/io.h>
++#include <linux/of.h>
++#include <linux/of_device.h>
++#include <linux/clk.h>
++#include <linux/clk-provider.h>
++
++static const char *aux_parents[] = {
++	"pll8_vote",
++	"pxo",
++};
++
++static unsigned int aux_parent_map[] = {
++	3,
++	0,
++};
++
++static const struct of_device_id kpss_xcc_match_table[] = {
++	{ .compatible = "qcom,kpss-acc-v1", .data = (void *)1UL },
++	{ .compatible = "qcom,kpss-gcc" },
++	{}
++};
++MODULE_DEVICE_TABLE(of, kpss_xcc_match_table);
++
++static int kpss_xcc_driver_probe(struct platform_device *pdev)
++{
++	const struct of_device_id *id;
++	struct clk *clk;
++	struct resource *res;
++	void __iomem *base;
++	const char *name;
++
++	id = of_match_device(kpss_xcc_match_table, &pdev->dev);
++	if (!id)
++		return -ENODEV;
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	base = devm_ioremap_resource(&pdev->dev, res);
++	if (IS_ERR(base))
++		return PTR_ERR(base);
++
++	if (id->data) {
++		if (of_property_read_string_index(pdev->dev.of_node,
++						  "clock-output-names",
++						  0, &name))
++			return -ENODEV;
++		base += 0x14;
++	} else {
++		name = "acpu_l2_aux";
++		base += 0x28;
++	}
++
++	clk = clk_register_mux_table(&pdev->dev, name, aux_parents,
++				     ARRAY_SIZE(aux_parents), 0, base, 0, 0x3,
++				     0, aux_parent_map, NULL);
++
++	platform_set_drvdata(pdev, clk);
++
++	return PTR_ERR_OR_ZERO(clk);
++}
++
++static int kpss_xcc_driver_remove(struct platform_device *pdev)
++{
++	clk_unregister_mux(platform_get_drvdata(pdev));
++	return 0;
++}
++
++static struct platform_driver kpss_xcc_driver = {
++	.probe = kpss_xcc_driver_probe,
++	.remove = kpss_xcc_driver_remove,
++	.driver = {
++		.name = "kpss-xcc",
++		.of_match_table = kpss_xcc_match_table,
++	},
++};
++module_platform_driver(kpss_xcc_driver);
++
++MODULE_DESCRIPTION("Krait Processor Sub System (KPSS) Clock Driver");
++MODULE_LICENSE("GPL v2");
++MODULE_ALIAS("platform:kpss-xcc");
diff --git a/target/linux/ipq806x/patches-4.14/0043-clk-qcom-Add-Krait-clock-controller-driver.patch b/target/linux/ipq806x/patches-4.14/0043-clk-qcom-Add-Krait-clock-controller-driver.patch
new file mode 100644
index 0000000..dcc10ec
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0043-clk-qcom-Add-Krait-clock-controller-driver.patch
@@ -0,0 +1,436 @@
+From patchwork Fri Dec  8 09:42:27 2017
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [v4,09/12] clk: qcom: Add Krait clock controller driver
+From: Sricharan R <sricharan@codeaurora.org>
+X-Patchwork-Id: 10102061
+Message-Id: <1512726150-7204-10-git-send-email-sricharan@codeaurora.org>
+To: mturquette@baylibre.com, sboyd@codeaurora.org,
+ devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
+ linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
+ viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org
+Cc: sricharan@codeaurora.org
+Date: Fri,  8 Dec 2017 15:12:27 +0530
+
+From: Stephen Boyd <sboyd@codeaurora.org>
+
+The Krait CPU clocks are made up of a primary mux and secondary
+mux for each CPU and the L2, controlled via cp15 accessors. For
+Kraits within KPSSv1 each secondary mux accepts a different aux
+source, but on KPSSv2 each secondary mux accepts the same aux
+source.
+
+Cc: <devicetree@vger.kernel.org>
+Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
+---
+ .../devicetree/bindings/clock/qcom,krait-cc.txt    |  22 ++
+ drivers/clk/qcom/Kconfig                           |   8 +
+ drivers/clk/qcom/Makefile                          |   1 +
+ drivers/clk/qcom/krait-cc.c                        | 350 +++++++++++++++++++++
+ 4 files changed, 381 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/clock/qcom,krait-cc.txt
+ create mode 100644 drivers/clk/qcom/krait-cc.c
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/clock/qcom,krait-cc.txt
+@@ -0,0 +1,22 @@
++Krait Clock Controller
++
++PROPERTIES
++
++- compatible:
++	Usage: required
++	Value type: <string>
++	Definition: must be one of:
++			"qcom,krait-cc-v1"
++			"qcom,krait-cc-v2"
++
++- #clock-cells:
++	Usage: required
++	Value type: <u32>
++	Definition: must be 1
++
++Example:
++
++	kraitcc: clock-controller {
++		compatible = "qcom,krait-cc-v1";
++		#clock-cells = <1>;
++	};
+--- a/drivers/clk/qcom/Kconfig
++++ b/drivers/clk/qcom/Kconfig
+@@ -213,6 +213,14 @@ config KPSS_XCC
+ 	  if you want to support CPU frequency scaling on devices such
+ 	  as MSM8960, APQ8064, etc.
+ 
++config KRAITCC
++	tristate "Krait Clock Controller"
++	depends on COMMON_CLK_QCOM && ARM
++	select KRAIT_CLOCKS
++	help
++	  Support for the Krait CPU clocks on Qualcomm devices.
++	  Say Y if you want to support CPU frequency scaling.
++
+ config KRAIT_CLOCKS
+ 	bool
+ 	select KRAIT_L2_ACCESSORS
+--- a/drivers/clk/qcom/Makefile
++++ b/drivers/clk/qcom/Makefile
+@@ -38,3 +38,4 @@ obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o
+ obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
+ obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o
+ obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
++obj-$(CONFIG_KRAITCC) += krait-cc.o
+--- /dev/null
++++ b/drivers/clk/qcom/krait-cc.c
+@@ -0,0 +1,350 @@
++/* Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/err.h>
++#include <linux/io.h>
++#include <linux/of.h>
++#include <linux/of_device.h>
++#include <linux/clk.h>
++#include <linux/clk-provider.h>
++#include <linux/slab.h>
++
++#include "clk-krait.h"
++
++static unsigned int sec_mux_map[] = {
++	2,
++	0,
++};
++
++static unsigned int pri_mux_map[] = {
++	1,
++	2,
++	0,
++};
++
++static int
++krait_add_div(struct device *dev, int id, const char *s, unsigned int offset)
++{
++	struct krait_div2_clk *div;
++	struct clk_init_data init = {
++		.num_parents = 1,
++		.ops = &krait_div2_clk_ops,
++		.flags = CLK_SET_RATE_PARENT,
++	};
++	const char *p_names[1];
++	struct clk *clk;
++
++	div = devm_kzalloc(dev, sizeof(*div), GFP_KERNEL);
++	if (!div)
++		return -ENOMEM;
++
++	div->width = 2;
++	div->shift = 6;
++	div->lpl = id >= 0;
++	div->offset = offset;
++	div->hw.init = &init;
++
++	init.name = kasprintf(GFP_KERNEL, "hfpll%s_div", s);
++	if (!init.name)
++		return -ENOMEM;
++
++	init.parent_names = p_names;
++	p_names[0] = kasprintf(GFP_KERNEL, "hfpll%s", s);
++	if (!p_names[0]) {
++		kfree(init.name);
++		return -ENOMEM;
++	}
++
++	clk = devm_clk_register(dev, &div->hw);
++	kfree(p_names[0]);
++	kfree(init.name);
++
++	return PTR_ERR_OR_ZERO(clk);
++}
++
++static int
++krait_add_sec_mux(struct device *dev, int id, const char *s,
++		  unsigned int offset, bool unique_aux)
++{
++	struct krait_mux_clk *mux;
++	static const char *sec_mux_list[] = {
++		"acpu_aux",
++		"qsb",
++	};
++	struct clk_init_data init = {
++		.parent_names = sec_mux_list,
++		.num_parents = ARRAY_SIZE(sec_mux_list),
++		.ops = &krait_mux_clk_ops,
++		.flags = CLK_SET_RATE_PARENT,
++	};
++	struct clk *clk;
++
++	mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
++	if (!mux)
++		return -ENOMEM;
++
++	mux->offset = offset;
++	mux->lpl = id >= 0;
++	mux->mask = 0x3;
++	mux->shift = 2;
++	mux->parent_map = sec_mux_map;
++	mux->hw.init = &init;
++
++	init.name = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s);
++	if (!init.name)
++		return -ENOMEM;
++
++	if (unique_aux) {
++		sec_mux_list[0] = kasprintf(GFP_KERNEL, "acpu%s_aux", s);
++		if (!sec_mux_list[0]) {
++			clk = ERR_PTR(-ENOMEM);
++			goto err_aux;
++		}
++	}
++
++	clk = devm_clk_register(dev, &mux->hw);
++
++	if (unique_aux)
++		kfree(sec_mux_list[0]);
++err_aux:
++	kfree(init.name);
++	return PTR_ERR_OR_ZERO(clk);
++}
++
++static struct clk *
++krait_add_pri_mux(struct device *dev, int id, const char *s,
++		  unsigned int offset)
++{
++	struct krait_mux_clk *mux;
++	const char *p_names[3];
++	struct clk_init_data init = {
++		.parent_names = p_names,
++		.num_parents = ARRAY_SIZE(p_names),
++		.ops = &krait_mux_clk_ops,
++		.flags = CLK_SET_RATE_PARENT,
++	};
++	struct clk *clk;
++
++	mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
++	if (!mux)
++		return ERR_PTR(-ENOMEM);
++
++	mux->mask = 0x3;
++	mux->shift = 0;
++	mux->offset = offset;
++	mux->lpl = id >= 0;
++	mux->parent_map = pri_mux_map;
++	mux->hw.init = &init;
++
++	init.name = kasprintf(GFP_KERNEL, "krait%s_pri_mux", s);
++	if (!init.name)
++		return ERR_PTR(-ENOMEM);
++
++	p_names[0] = kasprintf(GFP_KERNEL, "hfpll%s", s);
++	if (!p_names[0]) {
++		clk = ERR_PTR(-ENOMEM);
++		goto err_p0;
++	}
++
++	p_names[1] = kasprintf(GFP_KERNEL, "hfpll%s_div", s);
++	if (!p_names[1]) {
++		clk = ERR_PTR(-ENOMEM);
++		goto err_p1;
++	}
++
++	p_names[2] = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s);
++	if (!p_names[2]) {
++		clk = ERR_PTR(-ENOMEM);
++		goto err_p2;
++	}
++
++	clk = devm_clk_register(dev, &mux->hw);
++
++	kfree(p_names[2]);
++err_p2:
++	kfree(p_names[1]);
++err_p1:
++	kfree(p_names[0]);
++err_p0:
++	kfree(init.name);
++	return clk;
++}
++
++/* id < 0 for L2, otherwise id == physical CPU number */
++static struct clk *krait_add_clks(struct device *dev, int id, bool unique_aux)
++{
++	int ret;
++	unsigned int offset;
++	void *p = NULL;
++	const char *s;
++	struct clk *clk;
++
++	if (id >= 0) {
++		offset = 0x4501 + (0x1000 * id);
++		s = p = kasprintf(GFP_KERNEL, "%d", id);
++		if (!s)
++			return ERR_PTR(-ENOMEM);
++	} else {
++		offset = 0x500;
++		s = "_l2";
++	}
++
++	ret = krait_add_div(dev, id, s, offset);
++	if (ret) {
++		clk = ERR_PTR(ret);
++		goto err;
++	}
++
++	ret = krait_add_sec_mux(dev, id, s, offset, unique_aux);
++	if (ret) {
++		clk = ERR_PTR(ret);
++		goto err;
++	}
++
++	clk = krait_add_pri_mux(dev, id, s, offset);
++err:
++	kfree(p);
++	return clk;
++}
++
++static struct clk *krait_of_get(struct of_phandle_args *clkspec, void *data)
++{
++	unsigned int idx = clkspec->args[0];
++	struct clk **clks = data;
++
++	if (idx >= 5) {
++		pr_err("%s: invalid clock index %d\n", __func__, idx);
++		return ERR_PTR(-EINVAL);
++	}
++
++	return clks[idx] ? : ERR_PTR(-ENODEV);
++}
++
++static const struct of_device_id krait_cc_match_table[] = {
++	{ .compatible = "qcom,krait-cc-v1", (void *)1UL },
++	{ .compatible = "qcom,krait-cc-v2" },
++	{}
++};
++MODULE_DEVICE_TABLE(of, krait_cc_match_table);
++
++static int krait_cc_probe(struct platform_device *pdev)
++{
++	struct device *dev = &pdev->dev;
++	const struct of_device_id *id;
++	unsigned long cur_rate, aux_rate;
++	int cpu;
++	struct clk *clk;
++	struct clk **clks;
++	struct clk *l2_pri_mux_clk;
++
++	id = of_match_device(krait_cc_match_table, dev);
++	if (!id)
++		return -ENODEV;
++
++	/* Rate is 1 because 0 causes problems for __clk_mux_determine_rate */
++	clk = clk_register_fixed_rate(dev, "qsb", NULL, 0, 1);
++	if (IS_ERR(clk))
++		return PTR_ERR(clk);
++
++	if (!id->data) {
++		clk = clk_register_fixed_factor(dev, "acpu_aux",
++						"gpll0_vote", 0, 1, 2);
++		if (IS_ERR(clk))
++			return PTR_ERR(clk);
++	}
++
++	/* Krait configurations have at most 4 CPUs and one L2 */
++	clks = devm_kcalloc(dev, 5, sizeof(*clks), GFP_KERNEL);
++	if (!clks)
++		return -ENOMEM;
++
++	for_each_possible_cpu(cpu) {
++		clk = krait_add_clks(dev, cpu, id->data);
++		if (IS_ERR(clk))
++			return PTR_ERR(clk);
++		clks[cpu] = clk;
++	}
++
++	l2_pri_mux_clk = krait_add_clks(dev, -1, id->data);
++	if (IS_ERR(l2_pri_mux_clk))
++		return PTR_ERR(l2_pri_mux_clk);
++	clks[4] = l2_pri_mux_clk;
++
++	/*
++	 * We don't want the CPU or L2 clocks to be turned off at late init
++	 * if CPUFREQ or HOTPLUG configs are disabled. So, bump up the
++	 * refcount of these clocks. Any cpufreq/hotplug manager can assume
++	 * that the clocks have already been prepared and enabled by the time
++	 * they take over.
++	 */
++	for_each_online_cpu(cpu) {
++		clk_prepare_enable(l2_pri_mux_clk);
++		WARN(clk_prepare_enable(clks[cpu]),
++		     "Unable to turn on CPU%d clock", cpu);
++	}
++
++	/*
++	 * Force reinit of HFPLLs and muxes to overwrite any potential
++	 * incorrect configuration of HFPLLs and muxes by the bootloader.
++	 * While at it, also make sure the cores are running at known rates
++	 * and print the current rate.
++	 *
++	 * The clocks are set to aux clock rate first to make sure the
++	 * secondary mux is not sourcing off of QSB. The rate is then set to
++	 * two different rates to force a HFPLL reinit under all
++	 * circumstances.
++	 */
++	cur_rate = clk_get_rate(l2_pri_mux_clk);
++	aux_rate = 384000000;
++	if (cur_rate == 1) {
++		pr_info("L2 @ QSB rate. Forcing new rate.\n");
++		cur_rate = aux_rate;
++	}
++	clk_set_rate(l2_pri_mux_clk, aux_rate);
++	clk_set_rate(l2_pri_mux_clk, 2);
++	clk_set_rate(l2_pri_mux_clk, cur_rate);
++	pr_info("L2 @ %lu KHz\n", clk_get_rate(l2_pri_mux_clk) / 1000);
++	for_each_possible_cpu(cpu) {
++		clk = clks[cpu];
++		cur_rate = clk_get_rate(clk);
++		if (cur_rate == 1) {
++			pr_info("CPU%d @ QSB rate. Forcing new rate.\n", cpu);
++			cur_rate = aux_rate;
++		}
++
++		clk_set_rate(clk, aux_rate);
++		clk_set_rate(clk, 2);
++		clk_set_rate(clk, cur_rate);
++		pr_info("CPU%d @ %lu KHz\n", cpu, clk_get_rate(clk) / 1000);
++	}
++
++	of_clk_add_provider(dev->of_node, krait_of_get, clks);
++
++	return 0;
++}
++
++static struct platform_driver krait_cc_driver = {
++	.probe = krait_cc_probe,
++	.driver = {
++		.name = "krait-cc",
++		.of_match_table = krait_cc_match_table,
++	},
++};
++module_platform_driver(krait_cc_driver);
++
++MODULE_DESCRIPTION("Krait CPU Clock Driver");
++MODULE_LICENSE("GPL v2");
++MODULE_ALIAS("platform:krait-cc");
diff --git a/target/linux/ipq806x/patches-4.14/0044-clk-Add-safe-switch-hook.patch b/target/linux/ipq806x/patches-4.14/0044-clk-Add-safe-switch-hook.patch
new file mode 100644
index 0000000..d0eddc6
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0044-clk-Add-safe-switch-hook.patch
@@ -0,0 +1,160 @@
+From patchwork Fri Dec  8 09:42:28 2017
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [v4,10/12] clk: qcom: Add safe switch hook for krait mux clocks
+From: Sricharan R <sricharan@codeaurora.org>
+X-Patchwork-Id: 10102057
+Message-Id: <1512726150-7204-11-git-send-email-sricharan@codeaurora.org>
+To: mturquette@baylibre.com, sboyd@codeaurora.org,
+ devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
+ linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
+ viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org
+Cc: sricharan@codeaurora.org
+Date: Fri,  8 Dec 2017 15:12:28 +0530
+
+When the Hfplls are reprogrammed during the rate change,
+the primary muxes which are sourced from the same hfpll
+for higher frequencies, needs to be switched to the 'safe
+secondary mux' as the parent for that small window. This
+is done by registering a clk notifier for the muxes and
+switching to the safe parent in the PRE_RATE_CHANGE notifier
+and back to the original parent in the POST_RATE_CHANGE notifier.
+
+Signed-off-by: Sricharan R <sricharan@codeaurora.org>
+---
+ drivers/clk/qcom/clk-krait.c |  2 ++
+ drivers/clk/qcom/clk-krait.h |  3 +++
+ drivers/clk/qcom/krait-cc.c  | 56 ++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 61 insertions(+)
+
+--- a/drivers/clk/qcom/clk-krait.c
++++ b/drivers/clk/qcom/clk-krait.c
+@@ -60,6 +60,8 @@ static int krait_mux_set_parent(struct c
+ 	if (__clk_is_enabled(hw->clk))
+ 		__krait_mux_set_sel(mux, sel);
+ 
++	mux->reparent = true;
++
+ 	return 0;
+ }
+ 
+--- a/drivers/clk/qcom/clk-krait.h
++++ b/drivers/clk/qcom/clk-krait.h
+@@ -23,6 +23,9 @@ struct krait_mux_clk {
+ 	u32		shift;
+ 	u32		en_mask;
+ 	bool		lpl;
++	u8		safe_sel;
++	u8		old_index;
++	bool		reparent;
+ 
+ 	struct clk_hw	hw;
+ 	struct notifier_block   clk_nb;
+--- a/drivers/clk/qcom/krait-cc.c
++++ b/drivers/clk/qcom/krait-cc.c
+@@ -35,6 +35,49 @@ static unsigned int pri_mux_map[] = {
+ 	0,
+ };
+ 
++/*
++ * Notifier function for switching the muxes to safe parent
++ * while the hfpll is getting reprogrammed.
++ */
++static int krait_notifier_cb(struct notifier_block *nb,
++			     unsigned long event,
++			     void *data)
++{
++	int ret = 0;
++	struct krait_mux_clk *mux = container_of(nb, struct krait_mux_clk,
++						 clk_nb);
++	/* Switch to safe parent */
++	if (event == PRE_RATE_CHANGE) {
++		mux->old_index = krait_mux_clk_ops.get_parent(&mux->hw);
++		ret = krait_mux_clk_ops.set_parent(&mux->hw, mux->safe_sel);
++		mux->reparent = false;
++	/*
++	 * By the time POST_RATE_CHANGE notifier is called,
++	 * clk framework itself would have changed the parent for the new rate.
++	 * Only otherwise, put back to the old parent.
++	 */
++	} else if (event == POST_RATE_CHANGE) {
++		if (!mux->reparent)
++			ret = krait_mux_clk_ops.set_parent(&mux->hw,
++							   mux->old_index);
++	}
++
++	return notifier_from_errno(ret);
++}
++
++static int krait_notifier_register(struct device *dev, struct clk *clk,
++				   struct krait_mux_clk *mux)
++{
++	int ret = 0;
++
++	mux->clk_nb.notifier_call = krait_notifier_cb;
++	ret = clk_notifier_register(clk, &mux->clk_nb);
++	if (ret)
++		dev_err(dev, "failed to register clock notifier: %d\n", ret);
++
++	return ret;
++}
++
+ static int
+ krait_add_div(struct device *dev, int id, const char *s, unsigned int offset)
+ {
+@@ -79,6 +122,7 @@ static int
+ krait_add_sec_mux(struct device *dev, int id, const char *s,
+ 		  unsigned int offset, bool unique_aux)
+ {
++	int ret;
+ 	struct krait_mux_clk *mux;
+ 	static const char *sec_mux_list[] = {
+ 		"acpu_aux",
+@@ -102,6 +146,7 @@ krait_add_sec_mux(struct device *dev, in
+ 	mux->shift = 2;
+ 	mux->parent_map = sec_mux_map;
+ 	mux->hw.init = &init;
++	mux->safe_sel = 0;
+ 
+ 	init.name = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s);
+ 	if (!init.name)
+@@ -117,6 +162,11 @@ krait_add_sec_mux(struct device *dev, in
+ 
+ 	clk = devm_clk_register(dev, &mux->hw);
+ 
++	ret = krait_notifier_register(dev, clk, mux);
++	if (ret)
++		goto unique_aux;
++
++unique_aux:
+ 	if (unique_aux)
+ 		kfree(sec_mux_list[0]);
+ err_aux:
+@@ -128,6 +178,7 @@ static struct clk *
+ krait_add_pri_mux(struct device *dev, int id, const char *s,
+ 		  unsigned int offset)
+ {
++	int ret;
+ 	struct krait_mux_clk *mux;
+ 	const char *p_names[3];
+ 	struct clk_init_data init = {
+@@ -148,6 +199,7 @@ krait_add_pri_mux(struct device *dev, in
+ 	mux->lpl = id >= 0;
+ 	mux->parent_map = pri_mux_map;
+ 	mux->hw.init = &init;
++	mux->safe_sel = 2;
+ 
+ 	init.name = kasprintf(GFP_KERNEL, "krait%s_pri_mux", s);
+ 	if (!init.name)
+@@ -173,6 +225,10 @@ krait_add_pri_mux(struct device *dev, in
+ 
+ 	clk = devm_clk_register(dev, &mux->hw);
+ 
++	ret = krait_notifier_register(dev, clk, mux);
++	if (ret)
++		goto err_p3;
++err_p3:
+ 	kfree(p_names[2]);
+ err_p2:
+ 	kfree(p_names[1]);
diff --git a/target/linux/ipq806x/patches-4.14/0045-cpufreq-Add-module-to-register-cpufreq-on-Krait-CPUs.patch b/target/linux/ipq806x/patches-4.14/0045-cpufreq-Add-module-to-register-cpufreq-on-Krait-CPUs.patch
new file mode 100644
index 0000000..47c689e
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0045-cpufreq-Add-module-to-register-cpufreq-on-Krait-CPUs.patch
@@ -0,0 +1,307 @@
+From patchwork Fri Dec  8 09:42:29 2017
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [v4,11/12] cpufreq: Add module to register cpufreq on Krait CPUs
+From: Sricharan R <sricharan@codeaurora.org>
+X-Patchwork-Id: 10102075
+Message-Id: <1512726150-7204-12-git-send-email-sricharan@codeaurora.org>
+To: mturquette@baylibre.com, sboyd@codeaurora.org,
+ devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
+ linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
+ viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org
+Cc: sricharan@codeaurora.org
+Date: Fri,  8 Dec 2017 15:12:29 +0530
+
+From: Stephen Boyd <sboyd@codeaurora.org>
+
+Register a cpufreq-generic device whenever we detect that a
+"qcom,krait" compatible CPU is present in DT.
+
+Cc: <devicetree@vger.kernel.org>
+Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
+---
+ .../devicetree/bindings/arm/msm/qcom,pvs.txt       |  38 ++++
+ drivers/cpufreq/Kconfig.arm                        |   9 +
+ drivers/cpufreq/Makefile                           |   1 +
+ drivers/cpufreq/qcom-cpufreq.c                     | 204 +++++++++++++++++++++
+ 4 files changed, 252 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,pvs.txt
+ create mode 100644 drivers/cpufreq/qcom-cpufreq.c
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/arm/msm/qcom,pvs.txt
+@@ -0,0 +1,38 @@
++Qualcomm Process Voltage Scaling Tables
++
++The node name is required to be "qcom,pvs". There shall only be one
++such node present in the root of the tree.
++
++PROPERTIES
++
++- qcom,pvs-format-a or qcom,pvs-format-b:
++	Usage: required
++	Value type: <empty>
++	Definition: Indicates the format of qcom,speedX-pvsY-bin-vZ properties.
++		    If qcom,pvs-format-a is used the table is two columns
++		    (frequency and voltage in that order). If qcom,pvs-format-b 		    is used the table is three columns (frequency, voltage,
++		    and current in that order).
++
++- qcom,speedX-pvsY-bin-vZ:
++	Usage: required
++	Value type: <prop-encoded-array>
++	Definition: The PVS table corresponding to the speed bin X, pvs bin Y,
++		    and version Z.
++Example:
++
++	qcom,pvs {
++		qcom,pvs-format-a;
++		qcom,speed0-pvs0-bin-v0 =
++			<  384000000  950000 >,
++			<  486000000  975000 >,
++			<  594000000 1000000 >,
++			<  702000000 1025000 >,
++			<  810000000 1075000 >,
++			<  918000000 1100000 >,
++			< 1026000000 1125000 >,
++			< 1134000000 1175000 >,
++			< 1242000000 1200000 >,
++			< 1350000000 1225000 >,
++			< 1458000000 1237500 >,
++			< 1512000000 1250000 >;
++	};
+--- a/drivers/cpufreq/Kconfig.arm
++++ b/drivers/cpufreq/Kconfig.arm
+@@ -100,6 +100,15 @@ config ARM_OMAP2PLUS_CPUFREQ
+ 	depends on ARCH_OMAP2PLUS
+ 	default ARCH_OMAP2PLUS
+ 
++config ARM_QCOM_CPUFREQ
++	tristate "Qualcomm based"
++	depends on ARCH_QCOM
++	select PM_OPP
++	help
++	  This adds the CPUFreq driver for Qualcomm SoC based boards.
++
++	  If in doubt, say N.
++
+ config ARM_S3C_CPUFREQ
+ 	bool
+ 	help
+--- a/drivers/cpufreq/Makefile
++++ b/drivers/cpufreq/Makefile
+@@ -62,6 +62,7 @@ obj-$(CONFIG_ARM_MT8173_CPUFREQ)	+= mt81
+ obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ)	+= omap-cpufreq.o
+ obj-$(CONFIG_ARM_PXA2xx_CPUFREQ)	+= pxa2xx-cpufreq.o
+ obj-$(CONFIG_PXA3xx)			+= pxa3xx-cpufreq.o
++obj-$(CONFIG_ARM_QCOM_CPUFREQ)		+= qcom-cpufreq.o
+ obj-$(CONFIG_ARM_S3C24XX_CPUFREQ)	+= s3c24xx-cpufreq.o
+ obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o
+ obj-$(CONFIG_ARM_S3C2410_CPUFREQ)	+= s3c2410-cpufreq.o
+--- /dev/null
++++ b/drivers/cpufreq/qcom-cpufreq.c
+@@ -0,0 +1,204 @@
++/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/cpu.h>
++#include <linux/err.h>
++#include <linux/init.h>
++#include <linux/io.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/of.h>
++#include <linux/platform_device.h>
++#include <linux/pm_opp.h>
++#include <linux/slab.h>
++#include "cpufreq-dt.h"
++
++static void __init get_krait_bin_format_a(int *speed, int *pvs, int *pvs_ver)
++{
++	void __iomem *base;
++	u32 pte_efuse;
++
++	*speed = *pvs = *pvs_ver = 0;
++
++	base = ioremap(0x007000c0, 4);
++	if (!base) {
++		pr_warn("Unable to read efuse data. Defaulting to 0!\n");
++		return;
++	}
++
++	pte_efuse = readl_relaxed(base);
++	iounmap(base);
++
++	*speed = pte_efuse & 0xf;
++	if (*speed == 0xf)
++		*speed = (pte_efuse >> 4) & 0xf;
++
++	if (*speed == 0xf) {
++		*speed = 0;
++		pr_warn("Speed bin: Defaulting to %d\n", *speed);
++	} else {
++		pr_info("Speed bin: %d\n", *speed);
++	}
++
++	*pvs = (pte_efuse >> 10) & 0x7;
++	if (*pvs == 0x7)
++		*pvs = (pte_efuse >> 13) & 0x7;
++
++	if (*pvs == 0x7) {
++		*pvs = 0;
++		pr_warn("PVS bin: Defaulting to %d\n", *pvs);
++	} else {
++		pr_info("PVS bin: %d\n", *pvs);
++	}
++}
++
++static void __init get_krait_bin_format_b(int *speed, int *pvs, int *pvs_ver)
++{
++	u32 pte_efuse, redundant_sel;
++	void __iomem *base;
++
++	*speed = 0;
++	*pvs = 0;
++	*pvs_ver = 0;
++
++	base = ioremap(0xfc4b80b0, 8);
++	if (!base) {
++		pr_warn("Unable to read efuse data. Defaulting to 0!\n");
++		return;
++	}
++
++	pte_efuse = readl_relaxed(base);
++	redundant_sel = (pte_efuse >> 24) & 0x7;
++	*speed = pte_efuse & 0x7;
++	/* 4 bits of PVS are in efuse register bits 31, 8-6. */
++	*pvs = ((pte_efuse >> 28) & 0x8) | ((pte_efuse >> 6) & 0x7);
++	*pvs_ver = (pte_efuse >> 4) & 0x3;
++
++	switch (redundant_sel) {
++	case 1:
++		*speed = (pte_efuse >> 27) & 0xf;
++		break;
++	case 2:
++		*pvs = (pte_efuse >> 27) & 0xf;
++		break;
++	}
++
++	/* Check SPEED_BIN_BLOW_STATUS */
++	if (pte_efuse & BIT(3)) {
++		pr_info("Speed bin: %d\n", *speed);
++	} else {
++		pr_warn("Speed bin not set. Defaulting to 0!\n");
++		*speed = 0;
++	}
++
++	/* Check PVS_BLOW_STATUS */
++	pte_efuse = readl_relaxed(base + 0x4) & BIT(21);
++	if (pte_efuse) {
++		pr_info("PVS bin: %d\n", *pvs);
++	} else {
++		pr_warn("PVS bin not set. Defaulting to 0!\n");
++		*pvs = 0;
++	}
++
++	pr_info("PVS version: %d\n", *pvs_ver);
++	iounmap(base);
++}
++
++static int __init qcom_cpufreq_populate_opps(void)
++{
++	int len, rows, cols, i, k, speed, pvs, pvs_ver;
++	char table_name[] = "qcom,speedXX-pvsXX-bin-vXX";
++	struct device_node *np;
++	struct device *dev;
++	int cpu = 0;
++
++	np = of_find_node_by_name(NULL, "qcom,pvs");
++	if (!np)
++		return -ENODEV;
++
++	if (of_property_read_bool(np, "qcom,pvs-format-a")) {
++		get_krait_bin_format_a(&speed, &pvs, &pvs_ver);
++		cols = 2;
++	} else if (of_property_read_bool(np, "qcom,pvs-format-b")) {
++		get_krait_bin_format_b(&speed, &pvs, &pvs_ver);
++		cols = 3;
++	} else {
++		return -ENODEV;
++	}
++
++	snprintf(table_name, sizeof(table_name),
++		 "qcom,speed%d-pvs%d-bin-v%d", speed, pvs, pvs_ver);
++
++	if (!of_find_property(np, table_name, &len))
++		return -EINVAL;
++
++	len /= sizeof(u32);
++	if (len % cols || len == 0)
++		return -EINVAL;
++
++	rows = len / cols;
++
++	for (i = 0, k = 0; i < rows; i++) {
++		u32 freq, volt;
++
++		of_property_read_u32_index(np, table_name, k++, &freq);
++		of_property_read_u32_index(np, table_name, k++, &volt);
++		while (k % cols)
++			k++; /* Skip uA entries if present */
++		for (cpu = 0; cpu < num_possible_cpus(); cpu++) {
++			dev = get_cpu_device(cpu);
++			if (!dev)
++				return -ENODEV;
++			if (dev_pm_opp_add(dev, freq, volt))
++				pr_warn("failed to add OPP %u\n", freq);
++		}
++	}
++
++	return 0;
++}
++
++static int __init qcom_cpufreq_driver_init(void)
++{
++	struct cpufreq_dt_platform_data pdata = { .independent_clocks = true };
++	struct platform_device_info devinfo = {
++		.name = "cpufreq-dt",
++		.data = &pdata,
++		.size_data = sizeof(pdata),
++	};
++	struct device *cpu_dev;
++	struct device_node *np;
++	int ret;
++
++	cpu_dev = get_cpu_device(0);
++	if (!cpu_dev)
++		return -ENODEV;
++
++	np = of_node_get(cpu_dev->of_node);
++	if (!np)
++		return -ENOENT;
++
++	if (!of_device_is_compatible(np, "qcom,krait")) {
++		of_node_put(np);
++		return -ENODEV;
++	}
++	of_node_put(np);
++
++	ret = qcom_cpufreq_populate_opps();
++	if (ret)
++		return ret;
++
++	return PTR_ERR_OR_ZERO(platform_device_register_full(&devinfo));
++}
++module_init(qcom_cpufreq_driver_init);
++
++MODULE_DESCRIPTION("Qualcomm CPUfreq driver");
++MODULE_LICENSE("GPL v2");
diff --git a/target/linux/ipq806x/patches-4.14/0046-cpufreq-qcom-independent-core-clocks.patch b/target/linux/ipq806x/patches-4.14/0046-cpufreq-qcom-independent-core-clocks.patch
new file mode 100644
index 0000000..1d2fbf9
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0046-cpufreq-qcom-independent-core-clocks.patch
@@ -0,0 +1,66 @@
+From patchwork Fri Dec  8 09:42:30 2017
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [v4,12/12] cpufreq: dt: Reintroduce independent_clocks platform data
+From: Sricharan R <sricharan@codeaurora.org>
+X-Patchwork-Id: 10102073
+Message-Id: <1512726150-7204-13-git-send-email-sricharan@codeaurora.org>
+To: mturquette@baylibre.com, sboyd@codeaurora.org,
+ devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
+ linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
+ viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org
+Cc: sricharan@codeaurora.org
+Date: Fri,  8 Dec 2017 15:12:30 +0530
+
+The Platform data was removed earlier by,
+'commit eb96924acddc ("cpufreq: dt: Kill platform-data")'
+since there were no users at that time.
+Now this is required when the each of the cpu clocks
+can be scaled independently, which is the case
+for krait cores. So reintroduce it.
+
+Signed-off-by: Sricharan R <sricharan@codeaurora.org>
+---
+ drivers/cpufreq/cpufreq-dt.c | 7 ++++++-
+ drivers/cpufreq/cpufreq-dt.h | 6 ++++++
+ 2 files changed, 12 insertions(+), 1 deletion(-)
+
+--- a/drivers/cpufreq/cpufreq-dt.c
++++ b/drivers/cpufreq/cpufreq-dt.c
+@@ -220,7 +220,10 @@ static int cpufreq_init(struct cpufreq_p
+ 	}
+ 
+ 	if (fallback) {
+-		cpumask_setall(policy->cpus);
++		struct cpufreq_dt_platform_data *pd = cpufreq_get_driver_data();
++
++		if (!pd || !pd->independent_clocks)
++			cpumask_setall(policy->cpus);
+ 
+ 		/*
+ 		 * OPP tables are initialized only for policy->cpu, do it for
+@@ -372,6 +375,8 @@ static int dt_cpufreq_probe(struct platf
+ 	if (data && data->have_governor_per_policy)
+ 		dt_cpufreq_driver.flags |= CPUFREQ_HAVE_GOVERNOR_PER_POLICY;
+ 
++	dt_cpufreq_driver.driver_data = data;
++
+ 	ret = cpufreq_register_driver(&dt_cpufreq_driver);
+ 	if (ret)
+ 		dev_err(&pdev->dev, "failed register driver: %d\n", ret);
+--- a/drivers/cpufreq/cpufreq-dt.h
++++ b/drivers/cpufreq/cpufreq-dt.h
+@@ -13,6 +13,12 @@
+ #include <linux/types.h>
+ 
+ struct cpufreq_dt_platform_data {
++	/*
++	 * True when each CPU has its own clock to control its
++	 * frequency, false when all CPUs are controlled by a single
++	 * clock.
++	 */
++	bool independent_clocks;
+ 	bool have_governor_per_policy;
+ };
+ 
diff --git a/target/linux/ipq806x/patches-4.14/0047-mtd-nand-Create-a-BBT-flag-to-access-bad-block-marke.patch b/target/linux/ipq806x/patches-4.14/0047-mtd-nand-Create-a-BBT-flag-to-access-bad-block-marke.patch
new file mode 100644
index 0000000..fe98980
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0047-mtd-nand-Create-a-BBT-flag-to-access-bad-block-marke.patch
@@ -0,0 +1,72 @@
+From c7c6a0f50f9ac3620c611ce06ba1f9fafea0444e Mon Sep 17 00:00:00 2001
+From: Archit Taneja <architt@codeaurora.org>
+Date: Mon, 3 Aug 2015 10:38:14 +0530
+Subject: [PATCH 47/69] mtd: nand: Create a BBT flag to access bad block
+ markers in raw mode
+
+Some controllers can access the factory bad block marker from OOB only
+when they read it in raw mode. When ECC is enabled, these controllers
+discard reading/writing bad block markers, preventing access to them
+altogether.
+
+The bbt driver assumes MTD_OPS_PLACE_OOB when scanning for bad blocks.
+This results in the nand driver's ecc->read_oob() op to be called, which
+works with ECC enabled.
+
+Create a new BBT option flag that tells nand_bbt to force the mode to
+MTD_OPS_RAW. This would result in the correct op being called for the
+underlying nand controller driver.
+
+Reviewed-by: Andy Gross <agross@codeaurora.org>
+Signed-off-by: Archit Taneja <architt@codeaurora.org>
+---
+ drivers/mtd/nand/nand_base.c | 6 +++++-
+ drivers/mtd/nand/nand_bbt.c  | 6 +++++-
+ include/linux/mtd/bbm.h      | 6 ++++++
+ 3 files changed, 16 insertions(+), 2 deletions(-)
+
+--- a/drivers/mtd/nand/nand_base.c
++++ b/drivers/mtd/nand/nand_base.c
+@@ -481,7 +481,11 @@ static int nand_default_block_markbad(st
+ 	} else {
+ 		ops.len = ops.ooblen = 1;
+ 	}
+-	ops.mode = MTD_OPS_PLACE_OOB;
++
++	if (unlikely(chip->bbt_options & NAND_BBT_ACCESS_BBM_RAW))
++		ops.mode = MTD_OPS_RAW;
++	else
++		ops.mode = MTD_OPS_PLACE_OOB;
+ 
+ 	/* Write to first/last page(s) if necessary */
+ 	if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
+--- a/drivers/mtd/nand/nand_bbt.c
++++ b/drivers/mtd/nand/nand_bbt.c
+@@ -420,7 +420,11 @@ static int scan_block_fast(struct mtd_in
+ 	ops.oobbuf = buf;
+ 	ops.ooboffs = 0;
+ 	ops.datbuf = NULL;
+-	ops.mode = MTD_OPS_PLACE_OOB;
++
++	if (unlikely(bd->options & NAND_BBT_ACCESS_BBM_RAW))
++		ops.mode = MTD_OPS_RAW;
++	else
++		ops.mode = MTD_OPS_PLACE_OOB;
+ 
+ 	for (j = 0; j < numpages; j++) {
+ 		/*
+--- a/include/linux/mtd/bbm.h
++++ b/include/linux/mtd/bbm.h
+@@ -116,6 +116,12 @@ struct nand_bbt_descr {
+ #define NAND_BBT_NO_OOB_BBM	0x00080000
+ 
+ /*
++ * Force MTD_OPS_RAW mode when trying to access bad block markes from OOB. To
++ * be used by controllers which can access BBM only when ECC is disabled, i.e,
++ * when in RAW access mode
++ */
++#define NAND_BBT_ACCESS_BBM_RAW        0x00100000
++/*
+  * Flag set by nand_create_default_bbt_descr(), marking that the nand_bbt_descr
+  * was allocated dynamicaly and must be freed in nand_release(). Has no meaning
+  * in nand_chip.bbt_options.
diff --git a/target/linux/ipq806x/patches-4.14/0048-PM-OPP-HACK-Allow-to-set-regulator-without-opp_list.patch b/target/linux/ipq806x/patches-4.14/0048-PM-OPP-HACK-Allow-to-set-regulator-without-opp_list.patch
new file mode 100644
index 0000000..c85173a
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0048-PM-OPP-HACK-Allow-to-set-regulator-without-opp_list.patch
@@ -0,0 +1,26 @@
+From 5c294df1715d673f94f3b0a6e1ea3a426ca35e6e Mon Sep 17 00:00:00 2001
+From: Georgi Djakov <georgi.djakov@linaro.org>
+Date: Thu, 28 Apr 2016 16:20:12 +0300
+Subject: [PATCH 48/69] PM / OPP: HACK: Allow to set regulator without opp_list
+
+Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
+---
+ drivers/base/power/opp/core.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/drivers/base/power/opp/core.c
++++ b/drivers/base/power/opp/core.c
+@@ -1277,11 +1277,13 @@
+ 	if (!opp_table)
+ 		return ERR_PTR(-ENOMEM);
+ 
++#if 0
+ 	/* This should be called before OPPs are initialized */
+ 	if (WARN_ON(!list_empty(&opp_table->opp_list))) {
+ 		ret = -EBUSY;
+ 		goto err;
+ 	}
++#endif
+ 
+ 	/* Already have regulators set */
+ 	if (opp_table->regulators) {
diff --git a/target/linux/ipq806x/patches-4.14/0049-PM-OPP-Support-adjusting-OPP-voltages-at-runtime.patch b/target/linux/ipq806x/patches-4.14/0049-PM-OPP-Support-adjusting-OPP-voltages-at-runtime.patch
new file mode 100644
index 0000000..448a3d5
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0049-PM-OPP-Support-adjusting-OPP-voltages-at-runtime.patch
@@ -0,0 +1,147 @@
+From c949f08cf20fe82971fbdb4015daa38210da492e Mon Sep 17 00:00:00 2001
+From: Stephen Boyd <sboyd@codeaurora.org>
+Date: Fri, 18 Sep 2015 17:52:06 -0700
+Subject: [PATCH 49/69] PM / OPP: Support adjusting OPP voltages at runtime
+
+On some SoCs the Adaptive Voltage Scaling (AVS) technique is
+employed to optimize the operating voltage of a device. At a
+given frequency, the hardware monitors dynamic factors and either
+makes a suggestion for how much to adjust a voltage for the
+current frequency, or it automatically adjusts the voltage
+without software intervention. Add an API to the OPP library for
+the former case, so that AVS type devices can update the voltages
+for an OPP when the hardware determines the voltage should
+change. The assumption is that drivers like CPUfreq or devfreq
+will register for the OPP notifiers and adjust the voltage
+according to suggestions that AVS makes.
+
+Cc: Nishanth Menon <nm@ti.com>
+Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
+Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
+Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
+Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
+---
+ drivers/base/power/opp/core.c | 77 +++++++++++++++++++++++++++++++++++++++++++
+ include/linux/pm_opp.h        | 11 +++++++
+ 2 files changed, 88 insertions(+)
+
+--- a/drivers/base/power/opp/core.c
++++ b/drivers/base/power/opp/core.c
+@@ -1605,6 +1605,83 @@ unlock:
+ }
+ 
+ /**
++ * dev_pm_opp_adjust_voltage() - helper to change the voltage of an OPP
++ * @dev:		device for which we do this operation
++ * @freq:		OPP frequency to adjust voltage of
++ * @u_volt:		new OPP voltage
++ *
++ * Change the voltage of an OPP with an RCU operation.
++ *
++ * Return: -EINVAL for bad pointers, -ENOMEM if no memory available for the
++ * copy operation, returns 0 if no modifcation was done OR modification was
++ * successful.
++ *
++ * Locking: The internal device_opp and opp structures are RCU protected.
++ * Hence this function internally uses RCU updater strategy with mutex locks to
++ * keep the integrity of the internal data structures. Callers should ensure
++ * that this function is *NOT* called under RCU protection or in contexts where
++ * mutex locking or synchronize_rcu() blocking calls cannot be used.
++ */
++int dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq,
++			      unsigned long u_volt)
++{
++	struct opp_table *opp_table;
++	struct dev_pm_opp *new_opp, *tmp_opp, *opp = ERR_PTR(-ENODEV);
++	int r = 0;
++
++	/* keep the node allocated */
++	new_opp = kmalloc(sizeof(*new_opp), GFP_KERNEL);
++	if (!new_opp)
++		return -ENOMEM;
++
++	mutex_lock(&opp_table_lock);
++
++	/* Find the opp_table */
++	opp_table = _find_opp_table(dev);
++	if (IS_ERR(opp_table)) {
++		r = PTR_ERR(opp_table);
++		dev_warn(dev, "%s: Device OPP not found (%d)\n", __func__, r);
++		goto unlock;
++	}
++
++	/* Do we have the frequency? */
++	list_for_each_entry(tmp_opp, &opp_table->opp_list, node) {
++		if (tmp_opp->rate == freq) {
++			opp = tmp_opp;
++			break;
++		}
++	}
++	if (IS_ERR(opp)) {
++		r = PTR_ERR(opp);
++		goto unlock;
++	}
++
++	/* Is update really needed? */
++	if (opp->supplies[0].u_volt == u_volt)
++		goto unlock;
++	/* copy the old data over */
++	*new_opp = *opp;
++
++	/* plug in new node */
++	new_opp->supplies[0].u_volt = u_volt;
++
++	list_replace(&opp->node, &new_opp->node);
++	mutex_unlock(&opp_table_lock);
++	kfree(opp);
++
++	/* Notify the change of the OPP */
++	blocking_notifier_call_chain(&opp_table->head, OPP_EVENT_ADJUST_VOLTAGE,
++				 new_opp);
++
++	return 0;
++
++unlock:
++	mutex_unlock(&opp_table_lock);
++	kfree(new_opp);
++	return r;
++}
++
++/**
+  * dev_pm_opp_enable() - Enable a specific OPP
+  * @dev:	device for which we do this operation
+  * @freq:	OPP frequency to enable
+--- a/include/linux/pm_opp.h
++++ b/include/linux/pm_opp.h
+@@ -25,6 +25,7 @@ struct opp_table;
+ 
+ enum dev_pm_opp_event {
+ 	OPP_EVENT_ADD, OPP_EVENT_REMOVE, OPP_EVENT_ENABLE, OPP_EVENT_DISABLE,
++	OPP_EVENT_ADJUST_VOLTAGE,
+ };
+ 
+ /**
+@@ -108,6 +109,9 @@ int dev_pm_opp_add(struct device *dev, u
+ 		   unsigned long u_volt);
+ void dev_pm_opp_remove(struct device *dev, unsigned long freq);
+ 
++int dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq,
++			      unsigned long u_volt);
++
+ int dev_pm_opp_enable(struct device *dev, unsigned long freq);
+ 
+ int dev_pm_opp_disable(struct device *dev, unsigned long freq);
+@@ -208,6 +212,13 @@ static inline void dev_pm_opp_remove(str
+ {
+ }
+ 
++static inline int
++dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq,
++			  unsigned long u_volt)
++{
++	return 0;
++}
++
+ static inline int dev_pm_opp_enable(struct device *dev, unsigned long freq)
+ {
+ 	return 0;
diff --git a/target/linux/ipq806x/patches-4.14/0051-PM-OPP-Add-a-helper-to-get-an-opp-regulator-for-devi.patch b/target/linux/ipq806x/patches-4.14/0051-PM-OPP-Add-a-helper-to-get-an-opp-regulator-for-devi.patch
new file mode 100644
index 0000000..2cd7ac4
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0051-PM-OPP-Add-a-helper-to-get-an-opp-regulator-for-devi.patch
@@ -0,0 +1,52 @@
+From d06ca5e7a3cf726f5be5ffd96e93ccd798b8c09a Mon Sep 17 00:00:00 2001
+From: Georgi Djakov <georgi.djakov@linaro.org>
+Date: Thu, 12 May 2016 14:41:33 +0300
+Subject: [PATCH 51/69] PM / OPP: Add a helper to get an opp regulator for
+ device
+
+Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
+---
+ drivers/base/power/opp/core.c | 21 +++++++++++++++++++++
+ include/linux/pm_opp.h        |  1 +
+ 2 files changed, 22 insertions(+)
+
+--- a/drivers/base/power/opp/core.c
++++ b/drivers/base/power/opp/core.c
+@@ -126,6 +126,27 @@ unsigned long dev_pm_opp_get_freq(struct
+ }
+ EXPORT_SYMBOL_GPL(dev_pm_opp_get_freq);
+ 
++struct regulator *dev_pm_opp_get_regulator(struct device *dev)
++{
++	struct opp_table *opp_table;
++	struct regulator *reg;
++
++	rcu_read_lock();
++
++	opp_table = _find_opp_table(dev);
++	if (IS_ERR(opp_table)) {
++		rcu_read_unlock();
++		return ERR_CAST(opp_table);
++	}
++
++	reg = opp_table->regulators[0];
++
++	rcu_read_unlock();
++
++	return reg;
++}
++EXPORT_SYMBOL_GPL(dev_pm_opp_get_regulator);
++
+ /**
+  * dev_pm_opp_is_turbo() - Returns if opp is turbo OPP or not
+  * @opp: opp for which turbo mode is being verified
+--- a/include/linux/pm_opp.h
++++ b/include/linux/pm_opp.h
+@@ -85,6 +85,7 @@ enum dev_pm_opp_event {
+ unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp);
+ 
+ unsigned long dev_pm_opp_get_freq(struct dev_pm_opp *opp);
++struct regulator *dev_pm_opp_get_regulator(struct device *dev);
+ 
+ bool dev_pm_opp_is_turbo(struct dev_pm_opp *opp);
+ 
diff --git a/target/linux/ipq806x/patches-4.14/0052-PM-OPP-Update-the-voltage-tolerance-when-adjusting-t.patch b/target/linux/ipq806x/patches-4.14/0052-PM-OPP-Update-the-voltage-tolerance-when-adjusting-t.patch
new file mode 100644
index 0000000..6299fcf
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0052-PM-OPP-Update-the-voltage-tolerance-when-adjusting-t.patch
@@ -0,0 +1,38 @@
+From 4533c285c2aedce6d4434d7b877066de3b1ecb33 Mon Sep 17 00:00:00 2001
+From: Georgi Djakov <georgi.djakov@linaro.org>
+Date: Thu, 25 Aug 2016 18:43:35 +0300
+Subject: [PATCH 52/69] PM / OPP: Update the voltage tolerance when adjusting
+ the OPP
+
+When the voltage is adjusted, the voltage tolerance is not updated.
+This can lead to situations where the voltage min value is greater
+than the voltage max value. The final result is triggering a BUG()
+in the regulator core.
+Fix this by updating the voltage tolerance values too.
+
+Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
+---
+ drivers/base/power/opp/core.c | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+--- a/drivers/base/power/opp/core.c
++++ b/drivers/base/power/opp/core.c
+@@ -1649,6 +1649,7 @@ int dev_pm_opp_adjust_voltage(struct dev
+ 	struct opp_table *opp_table;
+ 	struct dev_pm_opp *new_opp, *tmp_opp, *opp = ERR_PTR(-ENODEV);
+ 	int r = 0;
++	unsigned long tol;
+ 
+ 	/* keep the node allocated */
+ 	new_opp = kmalloc(sizeof(*new_opp), GFP_KERNEL);
+@@ -1685,6 +1686,10 @@ int dev_pm_opp_adjust_voltage(struct dev
+ 
+ 	/* plug in new node */
+ 	new_opp->supplies[0].u_volt = u_volt;
++	tol = u_volt * opp_table->voltage_tolerance_v1 / 100;
++	new_opp->supplies[0].u_volt = u_volt;
++	new_opp->supplies[0].u_volt_min = u_volt - tol;
++	new_opp->supplies[0].u_volt_max = u_volt + tol;
+ 
+ 	list_replace(&opp->node, &new_opp->node);
+ 	mutex_unlock(&opp_table_lock);
diff --git a/target/linux/ipq806x/patches-4.14/0053-regulator-add-smb208-support.patch b/target/linux/ipq806x/patches-4.14/0053-regulator-add-smb208-support.patch
new file mode 100644
index 0000000..0d2862c
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0053-regulator-add-smb208-support.patch
@@ -0,0 +1,55 @@
+From ef10381ca4d01848ebedb4afb2c78feb8052f103 Mon Sep 17 00:00:00 2001
+From: Adrian Panella <ianchi74@outlook.com>
+Date: Thu, 9 Mar 2017 08:26:54 +0100
+Subject: [PATCH 53/69] regulator: add smb208 support
+
+Signed-off-by: Adrian Panella <ianchi74@outlook.com>
+---
+ Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 4 ++++
+ drivers/regulator/qcom_rpm-regulator.c             | 9 +++++++++
+ 2 files changed, 13 insertions(+)
+
+--- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
++++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
+@@ -61,6 +61,7 @@ Regulator nodes are identified by their
+ 		    "qcom,rpm-pm8901-regulators"
+ 		    "qcom,rpm-pm8921-regulators"
+ 		    "qcom,rpm-pm8018-regulators"
++		    "qcom,rpm-smb208-regulators"
+ 
+ - vdd_l0_l1_lvs-supply:
+ - vdd_l2_l11_l12-supply:
+@@ -171,6 +172,9 @@ pm8018:
+ 	s1, s2, s3, s4, s5, , l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
+ 	l12, l14, lvs1
+ 
++smb208:
++	s1a, s1b, s2a, s2b
++
+ The content of each sub-node is defined by the standard binding for regulators -
+ see regulator.txt - with additional custom properties described below:
+ 
+--- a/drivers/regulator/qcom_rpm-regulator.c
++++ b/drivers/regulator/qcom_rpm-regulator.c
+@@ -933,12 +933,21 @@ static const struct rpm_regulator_data r
+ 	{ }
+ };
+ 
++static const struct rpm_regulator_data rpm_smb208_regulators[] = {
++	{ "s1a",  QCOM_RPM_SMB208_S1a, &smb208_smps, "vin_s1a" },
++	{ "s1b",  QCOM_RPM_SMB208_S1b, &smb208_smps, "vin_s1b" },
++	{ "s2a",  QCOM_RPM_SMB208_S2a, &smb208_smps, "vin_s2a" },
++	{ "s2b",  QCOM_RPM_SMB208_S2b, &smb208_smps, "vin_s2b" },
++	{ }
++};
++
+ static const struct of_device_id rpm_of_match[] = {
+ 	{ .compatible = "qcom,rpm-pm8018-regulators",
+ 		.data = &rpm_pm8018_regulators },
+ 	{ .compatible = "qcom,rpm-pm8058-regulators", .data = &rpm_pm8058_regulators },
+ 	{ .compatible = "qcom,rpm-pm8901-regulators", .data = &rpm_pm8901_regulators },
+ 	{ .compatible = "qcom,rpm-pm8921-regulators", .data = &rpm_pm8921_regulators },
++	{ .compatible = "qcom,rpm-smb208-regulators", .data = &rpm_smb208_regulators },
+ 	{ }
+ };
+ MODULE_DEVICE_TABLE(of, rpm_of_match);
diff --git a/target/linux/ipq806x/patches-4.14/0054-cpufreq-dt-Handle-OPP-voltage-adjust-events.patch b/target/linux/ipq806x/patches-4.14/0054-cpufreq-dt-Handle-OPP-voltage-adjust-events.patch
new file mode 100644
index 0000000..edae3e4
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0054-cpufreq-dt-Handle-OPP-voltage-adjust-events.patch
@@ -0,0 +1,131 @@
+From 10577f74c35bd395951d1b2382c8d821089b5745 Mon Sep 17 00:00:00 2001
+From: Stephen Boyd <sboyd@codeaurora.org>
+Date: Fri, 18 Sep 2015 17:52:08 -0700
+Subject: [PATCH 54/69] cpufreq-dt: Handle OPP voltage adjust events
+
+On some SoCs the Adaptive Voltage Scaling (AVS) technique is
+employed to optimize the operating voltage of a device. At a
+given frequency, the hardware monitors dynamic factors and either
+makes a suggestion for how much to adjust a voltage for the
+current frequency, or it automatically adjusts the voltage
+without software intervention.
+
+In the former case, an AVS driver will call
+dev_pm_opp_modify_voltage() and update the voltage for the
+particular OPP the CPUs are using. Add an OPP notifier to
+cpufreq-dt so that we can adjust the voltage of the CPU when AVS
+updates the OPP.
+
+Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
+Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
+Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
+---
+ drivers/cpufreq/cpufreq-dt.c | 68 ++++++++++++++++++++++++++++++++++++++++++--
+ 1 file changed, 65 insertions(+), 3 deletions(-)
+
+--- a/drivers/cpufreq/cpufreq-dt.c
++++ b/drivers/cpufreq/cpufreq-dt.c
+@@ -32,6 +32,9 @@ struct private_data {
+ 	struct device *cpu_dev;
+ 	struct thermal_cooling_device *cdev;
+ 	const char *reg_name;
++	struct notifier_block opp_nb;
++	struct mutex lock;
++	unsigned long opp_freq;
+ };
+ 
+ static struct freq_attr *cpufreq_dt_attr[] = {
+@@ -43,9 +46,16 @@ static struct freq_attr *cpufreq_dt_attr
+ static int set_target(struct cpufreq_policy *policy, unsigned int index)
+ {
+ 	struct private_data *priv = policy->driver_data;
++	int ret;
++	unsigned long target_freq = policy->freq_table[index].frequency * 1000;
++
++	mutex_lock(&priv->lock);
++	ret = dev_pm_opp_set_rate(priv->cpu_dev, target_freq);
++	if (!ret)
++		priv->opp_freq = target_freq;
++	mutex_unlock(&priv->lock);
+ 
+-	return dev_pm_opp_set_rate(priv->cpu_dev,
+-				   policy->freq_table[index].frequency * 1000);
++	return ret;
+ }
+ 
+ /*
+@@ -86,6 +96,39 @@ node_put:
+ 	return name;
+ }
+ 
++static int opp_notifier(struct notifier_block *nb, unsigned long event,
++			void *data)
++{
++	struct dev_pm_opp *opp = data;
++	struct private_data *priv = container_of(nb, struct private_data,
++						 opp_nb);
++	struct device *cpu_dev = priv->cpu_dev;
++	struct regulator *cpu_reg;
++	unsigned long volt, freq;
++	int ret = 0;
++
++	if (event == OPP_EVENT_ADJUST_VOLTAGE) {
++		cpu_reg = dev_pm_opp_get_regulator(cpu_dev);
++		if (IS_ERR(cpu_reg)) {
++			ret = PTR_ERR(cpu_reg);
++			goto out;
++		}
++		volt = dev_pm_opp_get_voltage(opp);
++		freq = dev_pm_opp_get_freq(opp);
++
++		mutex_lock(&priv->lock);
++		if (freq == priv->opp_freq) {
++			ret = regulator_set_voltage_triplet(cpu_reg, volt, volt, volt);
++		}
++		mutex_unlock(&priv->lock);
++		if (ret)
++			dev_err(cpu_dev, "failed to scale voltage: %d\n", ret);
++	}
++
++out:
++	return notifier_from_errno(ret);
++}
++
+ static int resources_available(void)
+ {
+ 	struct device *cpu_dev;
+@@ -152,6 +195,7 @@ static int cpufreq_init(struct cpufreq_p
+ 	bool fallback = false;
+ 	const char *name;
+ 	int ret;
++	struct srcu_notifier_head *opp_srcu_head;
+ 
+ 	cpu_dev = get_cpu_device(policy->cpu);
+ 	if (!cpu_dev) {
+@@ -241,13 +285,16 @@ static int cpufreq_init(struct cpufreq_p
+ 		goto out_free_opp;
+ 	}
+ 
++	mutex_init(&priv->lock);
++	dev_pm_opp_register_notifier(cpu_dev, &priv->opp_nb);
++
+ 	priv->reg_name = name;
+ 	priv->opp_table = opp_table;
+ 
+ 	ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
+ 	if (ret) {
+ 		dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
+-		goto out_free_priv;
++		goto out_unregister_nb;
+ 	}
+ 
+ 	priv->cpu_dev = cpu_dev;
+@@ -283,6 +343,8 @@ static int cpufreq_init(struct cpufreq_p
+ 
+ out_free_cpufreq_table:
+ 	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
++out_unregister_nb:
++	dev_pm_opp_unregister_notifier(cpu_dev, &priv->opp_nb);
+ out_free_priv:
+ 	kfree(priv);
+ out_free_opp:
diff --git a/target/linux/ipq806x/patches-4.14/0055-cpufreq-dt-Add-L2-frequency-scaling-support.patch b/target/linux/ipq806x/patches-4.14/0055-cpufreq-dt-Add-L2-frequency-scaling-support.patch
new file mode 100644
index 0000000..26ea9f3
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0055-cpufreq-dt-Add-L2-frequency-scaling-support.patch
@@ -0,0 +1,90 @@
+From 0759cdff49f1cf361bf503c13f7bcb33da43ab95 Mon Sep 17 00:00:00 2001
+From: Georgi Djakov <georgi.djakov@linaro.org>
+Date: Tue, 8 Sep 2015 11:24:41 +0300
+Subject: [PATCH 55/69] cpufreq-dt: Add L2 frequency scaling support
+
+Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
+---
+ drivers/cpufreq/cpufreq-dt.c | 41 ++++++++++++++++++++++++++++++++++++++++-
+ include/linux/cpufreq.h      |  2 ++
+ 2 files changed, 42 insertions(+), 1 deletion(-)
+
+--- a/drivers/cpufreq/cpufreq-dt.c
++++ b/drivers/cpufreq/cpufreq-dt.c
+@@ -48,11 +48,41 @@ static int set_target(struct cpufreq_pol
+ 	struct private_data *priv = policy->driver_data;
+ 	int ret;
+ 	unsigned long target_freq = policy->freq_table[index].frequency * 1000;
++	struct clk *l2_clk = policy->l2_clk;
++	unsigned int l2_freq;
++	unsigned long new_l2_freq = 0;
+ 
+ 	mutex_lock(&priv->lock);
+ 	ret = dev_pm_opp_set_rate(priv->cpu_dev, target_freq);
+-	if (!ret)
++
++	if (!ret) {
++		if (!IS_ERR(l2_clk) && policy->l2_rate[0] && policy->l2_rate[1] &&
++				policy->l2_rate[2]) {
++			static unsigned long krait_l2[CONFIG_NR_CPUS] = { };
++			int cpu, ret = 0;
++
++			if (target_freq >= policy->l2_rate[2])
++				new_l2_freq = policy->l2_rate[2];
++			else if (target_freq >= policy->l2_rate[1])
++				new_l2_freq = policy->l2_rate[1];
++			else
++				new_l2_freq = policy->l2_rate[0];
++
++			krait_l2[policy->cpu] = new_l2_freq;
++			for_each_present_cpu(cpu)
++				new_l2_freq = max(new_l2_freq, krait_l2[cpu]);
++
++			l2_freq = clk_get_rate(l2_clk);
++
++			if (l2_freq != new_l2_freq) {
++				/* scale l2 with the core */
++				ret = clk_set_rate(l2_clk, new_l2_freq);
++			}
++		}
++
+ 		priv->opp_freq = target_freq;
++	}
++
+ 	mutex_unlock(&priv->lock);
+ 
+ 	return ret;
+@@ -196,6 +226,8 @@ static int cpufreq_init(struct cpufreq_p
+ 	const char *name;
+ 	int ret;
+ 	struct srcu_notifier_head *opp_srcu_head;
++	struct device_node *l2_np;
++	struct clk *l2_clk = NULL;
+ 
+ 	cpu_dev = get_cpu_device(policy->cpu);
+ 	if (!cpu_dev) {
+@@ -303,6 +335,13 @@ static int cpufreq_init(struct cpufreq_p
+ 
+ 	policy->suspend_freq = dev_pm_opp_get_suspend_opp_freq(cpu_dev) / 1000;
+ 
++	l2_clk = clk_get(cpu_dev, "l2");
++	if (!IS_ERR(l2_clk))
++		policy->l2_clk = l2_clk;
++	l2_np = of_find_node_by_name(NULL, "qcom,l2");
++	if (l2_np)
++		of_property_read_u32_array(l2_np, "qcom,l2-rates", policy->l2_rate, 3);
++
+ 	ret = cpufreq_table_validate_and_show(policy, freq_table);
+ 	if (ret) {
+ 		dev_err(cpu_dev, "%s: invalid frequency table: %d\n", __func__,
+--- a/include/linux/cpufreq.h
++++ b/include/linux/cpufreq.h
+@@ -73,6 +73,8 @@ struct cpufreq_policy {
+ 	unsigned int		cpu;    /* cpu managing this policy, must be online */
+ 
+ 	struct clk		*clk;
++	struct clk		*l2_clk; /* L2 clock */
++	unsigned int		l2_rate[3]; /* L2 bus clock rate thresholds */
+ 	struct cpufreq_cpuinfo	cpuinfo;/* see above */
+ 
+ 	unsigned int		min;    /* in kHz */
diff --git a/target/linux/ipq806x/patches-4.14/0056-cpufreq-dt-Add-missing-rcu-locks.patch b/target/linux/ipq806x/patches-4.14/0056-cpufreq-dt-Add-missing-rcu-locks.patch
new file mode 100644
index 0000000..c0eb2eb
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0056-cpufreq-dt-Add-missing-rcu-locks.patch
@@ -0,0 +1,23 @@
+From 001a8dcb56ced58c518aaa10a4f0ba5e878705b6 Mon Sep 17 00:00:00 2001
+From: Georgi Djakov <georgi.djakov@linaro.org>
+Date: Tue, 17 May 2016 16:15:43 +0300
+Subject: [PATCH 56/69] cpufreq-dt: Add missing rcu locks
+
+Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
+---
+ drivers/cpufreq/cpufreq-dt.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/cpufreq/cpufreq-dt.c
++++ b/drivers/cpufreq/cpufreq-dt.c
+@@ -143,8 +143,10 @@ static int opp_notifier(struct notifier_
+ 			ret = PTR_ERR(cpu_reg);
+ 			goto out;
+ 		}
++		rcu_read_lock();
+ 		volt = dev_pm_opp_get_voltage(opp);
+ 		freq = dev_pm_opp_get_freq(opp);
++		rcu_read_unlock();
+ 
+ 		mutex_lock(&priv->lock);
+ 		if (freq == priv->opp_freq) {
diff --git a/target/linux/ipq806x/patches-4.14/0059-ARM-cpuidle-Add-cpuidle-support-for-QCOM-cpus.patch b/target/linux/ipq806x/patches-4.14/0059-ARM-cpuidle-Add-cpuidle-support-for-QCOM-cpus.patch
new file mode 100644
index 0000000..5bd58c8
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0059-ARM-cpuidle-Add-cpuidle-support-for-QCOM-cpus.patch
@@ -0,0 +1,29 @@
+From 04ca10340f1b4d92e849724d322a7ca225d11539 Mon Sep 17 00:00:00 2001
+From: Lina Iyer <lina.iyer@linaro.org>
+Date: Wed, 25 Mar 2015 14:25:29 -0600
+Subject: [PATCH 59/69] ARM: cpuidle: Add cpuidle support for QCOM cpus
+
+Define ARM_QCOM_CPUIDLE config item to enable cpuidle support.
+
+Cc: Stephen Boyd <sboyd@codeaurora.org>
+Cc: Arnd Bergmann <arnd@arndb.de>
+Cc: Kevin Hilman <khilman@linaro.org>
+Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
+Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
+---
+ drivers/cpuidle/Kconfig.arm | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+--- a/drivers/cpuidle/Kconfig.arm
++++ b/drivers/cpuidle/Kconfig.arm
+@@ -75,3 +75,10 @@ config ARM_MVEBU_V7_CPUIDLE
+ 	depends on ARCH_MVEBU && !ARM64
+ 	help
+ 	  Select this to enable cpuidle on Armada 370, 38x and XP processors.
++
++config ARM_QCOM_CPUIDLE
++	bool "CPU Idle Driver for QCOM processors"
++	depends on ARCH_QCOM
++	select ARM_CPUIDLE
++	help
++	  Select this to enable cpuidle on QCOM processors.
diff --git a/target/linux/ipq806x/patches-4.14/0060-HACK-arch-arm-force-ZRELADDR-on-arch-qcom.patch b/target/linux/ipq806x/patches-4.14/0060-HACK-arch-arm-force-ZRELADDR-on-arch-qcom.patch
new file mode 100644
index 0000000..f260628
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0060-HACK-arch-arm-force-ZRELADDR-on-arch-qcom.patch
@@ -0,0 +1,62 @@
+From fa71139b55e114aa8c3c4823ff8ee7d49ee810d4 Mon Sep 17 00:00:00 2001
+From: Mathieu Olivari <mathieu@codeaurora.org>
+Date: Wed, 29 Apr 2015 15:21:46 -0700
+Subject: [PATCH 60/69] HACK: arch: arm: force ZRELADDR on arch-qcom
+
+ARCH_QCOM is using the ARCH_MULTIPLATFORM option, as now recommended
+on most ARM architectures. This automatically calculate ZRELADDR by
+masking PHYS_OFFSET with 0xf8000000.
+
+However, on IPQ806x, the first ~20MB of RAM is reserved for the hardware
+network accelerators, and the bootloader removes this section from the
+layout passed from the ATAGS (when used).
+
+For newer bootloader, when DT is used, this is not a problem, we just
+reserve this memory in the device tree. But if the bootloader doesn't
+have DT support, then ATAGS have to be used. In this case, the ARM
+decompressor will position the kernel in this low mem, which will not be
+in the RAM section mapped by the bootloader, which means the kernel will
+freeze in the middle of the boot process trying to map the memory.
+
+As a work around, this patch allows disabling AUTO_ZRELADDR when
+ARCH_QCOM is selected. It makes the zImage usage possible on bootloaders
+which don't support device-tree, which is the case on certain early
+IPQ806x based designs.
+
+Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
+---
+ arch/arm/Kconfig                 | 2 +-
+ arch/arm/Makefile                | 2 ++
+ arch/arm/mach-qcom/Makefile.boot | 1 +
+ 3 files changed, 4 insertions(+), 1 deletion(-)
+ create mode 100644 arch/arm/mach-qcom/Makefile.boot
+
+--- a/arch/arm/Kconfig
++++ b/arch/arm/Kconfig
+@@ -341,7 +341,7 @@
+ 	depends on MMU
+ 	select ARM_HAS_SG_CHAIN
+ 	select ARM_PATCH_PHYS_VIRT
+-	select AUTO_ZRELADDR
++	select AUTO_ZRELADDR if !ARCH_QCOM
+ 	select TIMER_OF
+ 	select COMMON_CLK
+ 	select GENERIC_CLOCKEVENTS
+--- a/arch/arm/Makefile
++++ b/arch/arm/Makefile
+@@ -255,9 +255,11 @@ MACHINE  := arch/arm/mach-$(word 1,$(mac
+ else
+ MACHINE  :=
+ endif
++ifeq ($(CONFIG_ARCH_QCOM),)
+ ifeq ($(CONFIG_ARCH_MULTIPLATFORM),y)
+ MACHINE  :=
+ endif
++endif
+ 
+ machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
+ platdirs := $(patsubst %,arch/arm/plat-%/,$(sort $(plat-y)))
+--- /dev/null
++++ b/arch/arm/mach-qcom/Makefile.boot
+@@ -0,0 +1 @@
++zreladdr-y+= 0x42208000
diff --git a/target/linux/ipq806x/patches-4.14/0061-mtd-rootfs-conflicts-with-OpenWrt-auto-mounting.patch b/target/linux/ipq806x/patches-4.14/0061-mtd-rootfs-conflicts-with-OpenWrt-auto-mounting.patch
new file mode 100644
index 0000000..a4a9575
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0061-mtd-rootfs-conflicts-with-OpenWrt-auto-mounting.patch
@@ -0,0 +1,23 @@
+From 5001f2e1a325b68dbf225bd17f69a4d3d975cca5 Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Thu, 9 Mar 2017 09:31:44 +0100
+Subject: [PATCH 61/69] mtd: "rootfs" conflicts with OpenWrt auto mounting
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ drivers/mtd/qcom_smem_part.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/drivers/mtd/qcom_smem_part.c
++++ b/drivers/mtd/qcom_smem_part.c
+@@ -189,6 +189,10 @@ static int parse_qcom_smem_partitions(st
+ 		m_part->size = le32_to_cpu(s_part->size) * (*smem_blksz);
+ 		m_part->offset = le32_to_cpu(s_part->start) * (*smem_blksz);
+ 
++		/* "rootfs" conflicts with OpenWrt auto mounting */
++		if (mtd_type_is_nand(master) && !strcmp(m_part->name, "rootfs"))
++			m_part->name = "ubi";
++
+ 		/*
+ 		 * The last SMEM partition may have its size marked as
+ 		 * something like 0xffffffff, which means "until the end of the
diff --git a/target/linux/ipq806x/patches-4.14/0062-ipq806x-gcc-Added-the-enable-regs-and-mask-for-PRNG.patch b/target/linux/ipq806x/patches-4.14/0062-ipq806x-gcc-Added-the-enable-regs-and-mask-for-PRNG.patch
new file mode 100644
index 0000000..7179343
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0062-ipq806x-gcc-Added-the-enable-regs-and-mask-for-PRNG.patch
@@ -0,0 +1,25 @@
+From a16fcf911a020e46439a3bb3e702463fc3159831 Mon Sep 17 00:00:00 2001
+From: Abhishek Sahu <absahu@codeaurora.org>
+Date: Wed, 18 Nov 2015 12:38:56 +0530
+Subject: [PATCH 62/69] ipq806x: gcc: Added the enable regs and mask for PRNG
+
+kernel got hanged while reading from /dev/hwrng at the
+time of PRNG clock enable
+
+Change-Id: I89856c7e19e6639508e6a2774304583a3ec91172
+Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
+---
+ drivers/clk/qcom/gcc-ipq806x.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/clk/qcom/gcc-ipq806x.c
++++ b/drivers/clk/qcom/gcc-ipq806x.c
+@@ -1233,6 +1233,8 @@ static struct clk_rcg prng_src = {
+ 		.parent_map = gcc_pxo_pll8_map,
+ 	},
+ 	.clkr = {
++		.enable_reg = 0x2e80,
++		.enable_mask = BIT(11),
+ 		.hw.init = &(struct clk_init_data){
+ 			.name = "prng_src",
+ 			.parent_names = gcc_pxo_pll8,
diff --git a/target/linux/ipq806x/patches-4.14/0063-1-ipq806x-tsens-driver.patch b/target/linux/ipq806x/patches-4.14/0063-1-ipq806x-tsens-driver.patch
new file mode 100644
index 0000000..685b0c3
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0063-1-ipq806x-tsens-driver.patch
@@ -0,0 +1,627 @@
+From 3302e1e1a3cfa4e67fda2a61d6f0c42205d40932 Mon Sep 17 00:00:00 2001
+From: Rajith Cherian <rajith@codeaurora.org>
+Date: Tue, 14 Feb 2017 18:30:43 +0530
+Subject: [PATCH] ipq8064: tsens: Base tsens driver for IPQ8064
+
+Add TSENS driver template to support IPQ8064.
+This is a base file copied from tsens-8960.c
+
+Change-Id: I47c573fdfa2d898243c6a6ba952d1632f91391f7
+Signed-off-by: Rajith Cherian <rajith@codeaurora.org>
+
+ipq8064: tsens: TSENS driver support for IPQ8064
+
+Support for IPQ8064 tsens driver. The driver works
+with the thermal framework. The driver overrides the
+following fucntionalities:
+
+1. Get current temperature.
+2. Get/Set trip temperatures.
+3. Enabled/Disable trip points.
+4. ISR for threshold generated interrupt.
+5. Notify userspace when trip points are hit.
+
+Change-Id: I8bc7204fd627d10875ab13fc1de8cb6c2ed7a918
+Signed-off-by: Rajith Cherian <rajith@codeaurora.org>
+---
+ .../devicetree/bindings/thermal/qcom-tsens.txt     |   1 +
+ drivers/thermal/qcom/Makefile                      |   3 +-
+ drivers/thermal/qcom/tsens-ipq8064.c               | 551 +++++++++++++++++++++
+ drivers/thermal/qcom/tsens.c                       |   3 +
+ drivers/thermal/qcom/tsens.h                       |   2 +-
+ 5 files changed, 558 insertions(+), 2 deletions(-)
+ create mode 100644 drivers/thermal/qcom/tsens-ipq8064.c
+
+--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
++++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
+@@ -5,6 +5,7 @@ Required properties:
+  - "qcom,msm8916-tsens" : For 8916 Family of SoCs
+  - "qcom,msm8974-tsens" : For 8974 Family of SoCs
+  - "qcom,msm8996-tsens" : For 8996 Family of SoCs
++ - "qcom,ipq8064-tsens" : For IPQ8064
+ 
+ - reg: Address range of the thermal registers
+ - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
+--- a/drivers/thermal/qcom/Makefile
++++ b/drivers/thermal/qcom/Makefile
+@@ -1,2 +1,3 @@
+ obj-$(CONFIG_QCOM_TSENS)	+= qcom_tsens.o
+-qcom_tsens-y			+= tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-8996.o
++qcom_tsens-y			+= tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-8996.o \
++				tsens-ipq8064.o
+--- /dev/null
++++ b/drivers/thermal/qcom/tsens-ipq8064.c
+@@ -0,0 +1,551 @@
++/*
++ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ */
++
++#include <linux/platform_device.h>
++#include <linux/delay.h>
++#include <linux/bitops.h>
++#include <linux/regmap.h>
++#include <linux/thermal.h>
++#include <linux/nvmem-consumer.h>
++#include <linux/io.h>
++#include <linux/interrupt.h>
++#include "tsens.h"
++
++#define CAL_MDEGC		30000
++
++#define CONFIG_ADDR		0x3640
++/* CONFIG_ADDR bitmasks */
++#define CONFIG			0x9b
++#define CONFIG_MASK		0xf
++#define CONFIG_SHIFT		0
++
++#define STATUS_CNTL_8064	0x3660
++#define CNTL_ADDR		0x3620
++/* CNTL_ADDR bitmasks */
++#define EN			BIT(0)
++#define SW_RST			BIT(1)
++#define SENSOR0_EN		BIT(3)
++#define SLP_CLK_ENA		BIT(26)
++#define MEASURE_PERIOD		1
++#define SENSOR0_SHIFT		3
++
++/* INT_STATUS_ADDR bitmasks */
++#define MIN_STATUS_MASK		BIT(0)
++#define LOWER_STATUS_CLR	BIT(1)
++#define UPPER_STATUS_CLR	BIT(2)
++#define MAX_STATUS_MASK		BIT(3)
++
++#define THRESHOLD_ADDR		0x3624
++/* THRESHOLD_ADDR bitmasks */
++#define THRESHOLD_MAX_CODE		0x20000
++#define THRESHOLD_MIN_CODE		0
++#define THRESHOLD_MAX_LIMIT_SHIFT	24
++#define THRESHOLD_MIN_LIMIT_SHIFT	16
++#define THRESHOLD_UPPER_LIMIT_SHIFT	8
++#define THRESHOLD_LOWER_LIMIT_SHIFT	0
++#define THRESHOLD_MAX_LIMIT_MASK	(THRESHOLD_MAX_CODE << \
++						THRESHOLD_MAX_LIMIT_SHIFT)
++#define THRESHOLD_MIN_LIMIT_MASK	(THRESHOLD_MAX_CODE << \
++						THRESHOLD_MIN_LIMIT_SHIFT)
++#define THRESHOLD_UPPER_LIMIT_MASK	(THRESHOLD_MAX_CODE << \
++						THRESHOLD_UPPER_LIMIT_SHIFT)
++#define THRESHOLD_LOWER_LIMIT_MASK	(THRESHOLD_MAX_CODE << \
++						THRESHOLD_LOWER_LIMIT_SHIFT)
++
++/* Initial temperature threshold values */
++#define LOWER_LIMIT_TH		0x9d /* 95C */
++#define UPPER_LIMIT_TH		0xa6 /* 105C */
++#define MIN_LIMIT_TH		0x0
++#define MAX_LIMIT_TH		0xff
++
++#define S0_STATUS_ADDR		0x3628
++#define STATUS_ADDR_OFFSET	2
++#define SENSOR_STATUS_SIZE	4
++#define INT_STATUS_ADDR		0x363c
++#define TRDY_MASK		BIT(7)
++#define TIMEOUT_US		100
++
++#define TSENS_EN		BIT(0)
++#define TSENS_SW_RST		BIT(1)
++#define TSENS_ADC_CLK_SEL	BIT(2)
++#define SENSOR0_EN		BIT(3)
++#define SENSOR1_EN		BIT(4)
++#define SENSOR2_EN		BIT(5)
++#define SENSOR3_EN		BIT(6)
++#define SENSOR4_EN		BIT(7)
++#define SENSORS_EN		(SENSOR0_EN | SENSOR1_EN | \
++				SENSOR2_EN | SENSOR3_EN | SENSOR4_EN)
++#define TSENS_8064_SENSOR5_EN				BIT(8)
++#define TSENS_8064_SENSOR6_EN				BIT(9)
++#define TSENS_8064_SENSOR7_EN				BIT(10)
++#define TSENS_8064_SENSOR8_EN				BIT(11)
++#define TSENS_8064_SENSOR9_EN				BIT(12)
++#define TSENS_8064_SENSOR10_EN				BIT(13)
++#define TSENS_8064_SENSORS_EN				(SENSORS_EN | \
++						TSENS_8064_SENSOR5_EN | \
++						TSENS_8064_SENSOR6_EN | \
++						TSENS_8064_SENSOR7_EN | \
++						TSENS_8064_SENSOR8_EN | \
++						TSENS_8064_SENSOR9_EN | \
++						TSENS_8064_SENSOR10_EN)
++
++#define TSENS_8064_SEQ_SENSORS	5
++#define TSENS_8064_S4_S5_OFFSET	40
++#define TSENS_FACTOR		1
++
++/* Trips: from very hot to very cold */
++enum tsens_trip_type {
++	TSENS_TRIP_STAGE3 = 0,
++	TSENS_TRIP_STAGE2,
++	TSENS_TRIP_STAGE1,
++	TSENS_TRIP_STAGE0,
++	TSENS_TRIP_NUM,
++};
++
++u32 tsens_8064_slope[] = {
++			1176, 1176, 1154, 1176,
++			1111, 1132, 1132, 1199,
++			1132, 1199, 1132
++			};
++
++/* Temperature on y axis and ADC-code on x-axis */
++static inline int code_to_degC(u32 adc_code, const struct tsens_sensor *s)
++{
++	int degcbeforefactor, degc;
++
++	degcbeforefactor = (adc_code * s->slope) + s->offset;
++
++	if (degcbeforefactor == 0)
++		degc = degcbeforefactor;
++	else if (degcbeforefactor > 0)
++		degc = (degcbeforefactor + TSENS_FACTOR/2)
++			/ TSENS_FACTOR;
++	else
++		degc = (degcbeforefactor - TSENS_FACTOR/2)
++			/ TSENS_FACTOR;
++
++	return degc;
++}
++
++static int degC_to_code(int degC, const struct tsens_sensor *s)
++{
++	int code = ((degC * TSENS_FACTOR - s->offset) + (s->slope/2))
++			/ s->slope;
++
++	if (code > THRESHOLD_MAX_CODE)
++		code = THRESHOLD_MAX_CODE;
++	else if (code < THRESHOLD_MIN_CODE)
++		code = THRESHOLD_MIN_CODE;
++	return code;
++}
++
++static int suspend_ipq8064(struct tsens_device *tmdev)
++{
++	int ret;
++	unsigned int mask;
++	struct regmap *map = tmdev->map;
++
++	ret = regmap_read(map, THRESHOLD_ADDR, &tmdev->ctx.threshold);
++	if (ret)
++		return ret;
++
++	ret = regmap_read(map, CNTL_ADDR, &tmdev->ctx.control);
++	if (ret)
++		return ret;
++
++	mask = SLP_CLK_ENA | EN;
++
++	ret = regmap_update_bits(map, CNTL_ADDR, mask, 0);
++	if (ret)
++		return ret;
++
++	return 0;
++}
++
++static int resume_ipq8064(struct tsens_device *tmdev)
++{
++	int ret;
++	struct regmap *map = tmdev->map;
++
++	ret = regmap_update_bits(map, CNTL_ADDR, SW_RST, SW_RST);
++	if (ret)
++		return ret;
++
++	ret = regmap_update_bits(map, CONFIG_ADDR, CONFIG_MASK, CONFIG);
++	if (ret)
++		return ret;
++
++	ret = regmap_write(map, THRESHOLD_ADDR, tmdev->ctx.threshold);
++	if (ret)
++		return ret;
++
++	ret = regmap_write(map, CNTL_ADDR, tmdev->ctx.control);
++	if (ret)
++		return ret;
++
++	return 0;
++}
++
++static void notify_uspace_tsens_fn(struct work_struct *work)
++{
++	struct tsens_sensor *s = container_of(work, struct tsens_sensor,
++								notify_work);
++
++	sysfs_notify(&s->tzd->device.kobj, NULL, "type");
++}
++
++static void tsens_scheduler_fn(struct work_struct *work)
++{
++	struct tsens_device *tmdev = container_of(work, struct tsens_device,
++					tsens_work);
++	unsigned int threshold, threshold_low, code, reg, sensor, mask;
++	unsigned int sensor_addr;
++	bool upper_th_x, lower_th_x;
++	int adc_code, ret;
++
++	ret = regmap_read(tmdev->map, STATUS_CNTL_8064, &reg);
++	if (ret)
++		return;
++	reg = reg | LOWER_STATUS_CLR | UPPER_STATUS_CLR;
++	ret = regmap_write(tmdev->map, STATUS_CNTL_8064, reg);
++	if (ret)
++		return;
++
++	mask = ~(LOWER_STATUS_CLR | UPPER_STATUS_CLR);
++	ret = regmap_read(tmdev->map, THRESHOLD_ADDR, &threshold);
++	if (ret)
++		return;
++	threshold_low = (threshold & THRESHOLD_LOWER_LIMIT_MASK)
++				>> THRESHOLD_LOWER_LIMIT_SHIFT;
++	threshold = (threshold & THRESHOLD_UPPER_LIMIT_MASK)
++				>> THRESHOLD_UPPER_LIMIT_SHIFT;
++
++	ret = regmap_read(tmdev->map, STATUS_CNTL_8064, &reg);
++	if (ret)
++		return;
++
++	ret = regmap_read(tmdev->map, CNTL_ADDR, &sensor);
++	if (ret)
++		return;
++	sensor &= (uint32_t) TSENS_8064_SENSORS_EN;
++	sensor >>= SENSOR0_SHIFT;
++
++	/* Constraint: There is only 1 interrupt control register for all
++	 * 11 temperature sensor. So monitoring more than 1 sensor based
++	 * on interrupts will yield inconsistent result. To overcome this
++	 * issue we will monitor only sensor 0 which is the master sensor.
++	 */
++
++	/* Skip if the sensor is disabled */
++	if (sensor & 1) {
++		ret = regmap_read(tmdev->map, tmdev->sensor[0].status, &code);
++		if (ret)
++			return;
++		upper_th_x = code >= threshold;
++		lower_th_x = code <= threshold_low;
++		if (upper_th_x)
++			mask |= UPPER_STATUS_CLR;
++		if (lower_th_x)
++			mask |= LOWER_STATUS_CLR;
++		if (upper_th_x || lower_th_x) {
++			/* Notify user space */
++			schedule_work(&tmdev->sensor[0].notify_work);
++			regmap_read(tmdev->map, sensor_addr, &adc_code);
++			pr_debug("Trigger (%d degrees) for sensor %d\n",
++				code_to_degC(adc_code, &tmdev->sensor[0]), 0);
++		}
++	}
++	regmap_write(tmdev->map, STATUS_CNTL_8064, reg & mask);
++
++	/* force memory to sync */
++	mb();
++}
++
++static irqreturn_t tsens_isr(int irq, void *data)
++{
++	struct tsens_device *tmdev = data;
++
++	schedule_work(&tmdev->tsens_work);
++	return IRQ_HANDLED;
++}
++
++static void hw_init(struct tsens_device *tmdev)
++{
++	int ret;
++	unsigned int reg_cntl = 0, reg_cfg = 0, reg_thr = 0;
++	unsigned int reg_status_cntl = 0;
++
++	regmap_read(tmdev->map, CNTL_ADDR, &reg_cntl);
++	regmap_write(tmdev->map, CNTL_ADDR, reg_cntl | TSENS_SW_RST);
++
++	reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18)
++		| (((1 << tmdev->num_sensors) - 1) << SENSOR0_SHIFT);
++	regmap_write(tmdev->map, CNTL_ADDR, reg_cntl);
++	regmap_read(tmdev->map, STATUS_CNTL_8064, &reg_status_cntl);
++	reg_status_cntl |= LOWER_STATUS_CLR | UPPER_STATUS_CLR
++			| MIN_STATUS_MASK | MAX_STATUS_MASK;
++	regmap_write(tmdev->map, STATUS_CNTL_8064, reg_status_cntl);
++	reg_cntl |= TSENS_EN;
++	regmap_write(tmdev->map, CNTL_ADDR, reg_cntl);
++
++	regmap_read(tmdev->map, CONFIG_ADDR, &reg_cfg);
++	reg_cfg = (reg_cfg & ~CONFIG_MASK) | (CONFIG << CONFIG_SHIFT);
++	regmap_write(tmdev->map, CONFIG_ADDR, reg_cfg);
++
++	reg_thr |= (LOWER_LIMIT_TH << THRESHOLD_LOWER_LIMIT_SHIFT)
++		| (UPPER_LIMIT_TH << THRESHOLD_UPPER_LIMIT_SHIFT)
++		| (MIN_LIMIT_TH << THRESHOLD_MIN_LIMIT_SHIFT)
++		| (MAX_LIMIT_TH << THRESHOLD_MAX_LIMIT_SHIFT);
++
++	regmap_write(tmdev->map, THRESHOLD_ADDR, reg_thr);
++
++	ret = devm_request_irq(tmdev->dev, tmdev->tsens_irq, tsens_isr,
++			IRQF_TRIGGER_RISING, "tsens_interrupt", tmdev);
++	if (ret < 0) {
++		pr_err("%s: request_irq FAIL: %d\n", __func__, ret);
++		return;
++	}
++
++	INIT_WORK(&tmdev->tsens_work, tsens_scheduler_fn);
++}
++
++static int init_ipq8064(struct tsens_device *tmdev)
++{
++	int ret, i;
++	u32 reg_cntl, offset = 0;
++
++	init_common(tmdev);
++	if (!tmdev->map)
++		return -ENODEV;
++
++	/*
++	 * The status registers for each sensor are discontiguous
++	 * because some SoCs have 5 sensors while others have more
++	 * but the control registers stay in the same place, i.e
++	 * directly after the first 5 status registers.
++	 */
++	for (i = 0; i < tmdev->num_sensors; i++) {
++		if (i >= TSENS_8064_SEQ_SENSORS)
++			offset = TSENS_8064_S4_S5_OFFSET;
++
++		tmdev->sensor[i].status = S0_STATUS_ADDR + offset
++					+ (i << STATUS_ADDR_OFFSET);
++		tmdev->sensor[i].slope = tsens_8064_slope[i];
++		INIT_WORK(&tmdev->sensor[i].notify_work,
++						notify_uspace_tsens_fn);
++	}
++
++	reg_cntl = SW_RST;
++	ret = regmap_update_bits(tmdev->map, CNTL_ADDR, SW_RST, reg_cntl);
++	if (ret)
++		return ret;
++
++	reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18);
++	reg_cntl &= ~SW_RST;
++	ret = regmap_update_bits(tmdev->map, CONFIG_ADDR,
++					 CONFIG_MASK, CONFIG);
++
++	reg_cntl |= GENMASK(tmdev->num_sensors - 1, 0) << SENSOR0_SHIFT;
++	ret = regmap_write(tmdev->map, CNTL_ADDR, reg_cntl);
++	if (ret)
++		return ret;
++
++	reg_cntl |= EN;
++	ret = regmap_write(tmdev->map, CNTL_ADDR, reg_cntl);
++	if (ret)
++		return ret;
++
++	return 0;
++}
++
++static int calibrate_ipq8064(struct tsens_device *tmdev)
++{
++	int i;
++	char *data, *data_backup;
++
++	ssize_t num_read = tmdev->num_sensors;
++	struct tsens_sensor *s = tmdev->sensor;
++
++	data = qfprom_read(tmdev->dev, "calib");
++	if (IS_ERR(data)) {
++		pr_err("Calibration not found.\n");
++		return PTR_ERR(data);
++	}
++
++	data_backup = qfprom_read(tmdev->dev, "calib_backup");
++	if (IS_ERR(data_backup)) {
++		pr_err("Backup calibration not found.\n");
++		return PTR_ERR(data_backup);
++	}
++
++	for (i = 0; i < num_read; i++) {
++		s[i].calib_data = readb_relaxed(data + i);
++		s[i].calib_data_backup = readb_relaxed(data_backup + i);
++
++		if (s[i].calib_data_backup)
++			s[i].calib_data = s[i].calib_data_backup;
++		if (!s[i].calib_data) {
++			pr_err("QFPROM TSENS calibration data not present\n");
++			return -ENODEV;
++		}
++		s[i].slope = tsens_8064_slope[i];
++		s[i].offset = CAL_MDEGC - (s[i].calib_data * s[i].slope);
++	}
++
++	hw_init(tmdev);
++
++	return 0;
++}
++
++static int get_temp_ipq8064(struct tsens_device *tmdev, int id, int *temp)
++{
++	int ret;
++	u32 code, trdy;
++	const struct tsens_sensor *s = &tmdev->sensor[id];
++	unsigned long timeout;
++
++	timeout = jiffies + usecs_to_jiffies(TIMEOUT_US);
++	do {
++		ret = regmap_read(tmdev->map, INT_STATUS_ADDR, &trdy);
++		if (ret)
++			return ret;
++		if (!(trdy & TRDY_MASK))
++			continue;
++		ret = regmap_read(tmdev->map, s->status, &code);
++		if (ret)
++			return ret;
++		*temp = code_to_degC(code, s);
++		return 0;
++	} while (time_before(jiffies, timeout));
++
++	return -ETIMEDOUT;
++}
++
++static int set_trip_temp_ipq8064(void *data, int trip, int temp)
++{
++	unsigned int reg_th, reg_cntl;
++	int ret, code, code_chk, hi_code, lo_code;
++	const struct tsens_sensor *s = data;
++	struct tsens_device *tmdev = s->tmdev;
++
++	code_chk = code = degC_to_code(temp, s);
++
++	if (code < THRESHOLD_MIN_CODE || code > THRESHOLD_MAX_CODE)
++		return -EINVAL;
++
++	ret = regmap_read(tmdev->map, STATUS_CNTL_8064, &reg_cntl);
++	if (ret)
++		return ret;
++
++	ret = regmap_read(tmdev->map, THRESHOLD_ADDR, &reg_th);
++	if (ret)
++		return ret;
++
++	hi_code = (reg_th & THRESHOLD_UPPER_LIMIT_MASK)
++			>> THRESHOLD_UPPER_LIMIT_SHIFT;
++	lo_code = (reg_th & THRESHOLD_LOWER_LIMIT_MASK)
++			>> THRESHOLD_LOWER_LIMIT_SHIFT;
++
++	switch (trip) {
++	case TSENS_TRIP_STAGE3:
++		code <<= THRESHOLD_MAX_LIMIT_SHIFT;
++		reg_th &= ~THRESHOLD_MAX_LIMIT_MASK;
++		break;
++	case TSENS_TRIP_STAGE2:
++		if (code_chk <= lo_code)
++			return -EINVAL;
++		code <<= THRESHOLD_UPPER_LIMIT_SHIFT;
++		reg_th &= ~THRESHOLD_UPPER_LIMIT_MASK;
++		break;
++	case TSENS_TRIP_STAGE1:
++		if (code_chk >= hi_code)
++			return -EINVAL;
++		code <<= THRESHOLD_LOWER_LIMIT_SHIFT;
++		reg_th &= ~THRESHOLD_LOWER_LIMIT_MASK;
++		break;
++	case TSENS_TRIP_STAGE0:
++		code <<= THRESHOLD_MIN_LIMIT_SHIFT;
++		reg_th &= ~THRESHOLD_MIN_LIMIT_MASK;
++		break;
++	default:
++		return -EINVAL;
++	}
++
++	ret = regmap_write(tmdev->map, THRESHOLD_ADDR, reg_th | code);
++	if (ret)
++		return ret;
++
++	return 0;
++}
++
++static int set_trip_activate_ipq8064(void *data, int trip,
++					enum thermal_trip_activation_mode mode)
++{
++	unsigned int reg_cntl, mask, val;
++	const struct tsens_sensor *s = data;
++	struct tsens_device *tmdev = s->tmdev;
++	int ret;
++
++	if (!tmdev || trip < 0)
++		return -EINVAL;
++
++	ret = regmap_read(tmdev->map, STATUS_CNTL_8064, &reg_cntl);
++	if (ret)
++		return ret;
++
++	switch (trip) {
++	case TSENS_TRIP_STAGE3:
++		mask = MAX_STATUS_MASK;
++		break;
++	case TSENS_TRIP_STAGE2:
++		mask = UPPER_STATUS_CLR;
++		break;
++	case TSENS_TRIP_STAGE1:
++		mask = LOWER_STATUS_CLR;
++		break;
++	case TSENS_TRIP_STAGE0:
++		mask = MIN_STATUS_MASK;
++		break;
++	default:
++		return -EINVAL;
++	}
++
++	if (mode == THERMAL_TRIP_ACTIVATION_DISABLED)
++		val = reg_cntl | mask;
++	else
++		val = reg_cntl & ~mask;
++
++	ret = regmap_write(tmdev->map, STATUS_CNTL_8064, val);
++	if (ret)
++		return ret;
++
++	/* force memory to sync */
++	mb();
++	return 0;
++}
++
++const struct tsens_ops ops_ipq8064 = {
++	.init		= init_ipq8064,
++	.calibrate	= calibrate_ipq8064,
++	.get_temp	= get_temp_ipq8064,
++	.suspend	= suspend_ipq8064,
++	.resume		= resume_ipq8064,
++	.set_trip_temp	= set_trip_temp_ipq8064,
++	.set_trip_activate = set_trip_activate_ipq8064,
++};
++
++const struct tsens_data data_ipq8064 = {
++	.num_sensors	= 11,
++	.ops		= &ops_ipq8064,
++};
+--- a/drivers/thermal/qcom/tsens.c
++++ b/drivers/thermal/qcom/tsens.c
+@@ -72,6 +72,9 @@ static const struct of_device_id tsens_t
+ 	}, {
+ 		.compatible = "qcom,msm8996-tsens",
+ 		.data = &data_8996,
++	}, {
++		.compatible = "qcom,ipq8064-tsens",
++		.data = &data_ipq8064,
+ 	},
+ 	{}
+ };
+--- a/drivers/thermal/qcom/tsens.h
++++ b/drivers/thermal/qcom/tsens.h
+@@ -89,6 +89,6 @@ void compute_intercept_slope(struct tsen
+ int init_common(struct tsens_device *);
+ int get_temp_common(struct tsens_device *, int, int *);
+ 
+-extern const struct tsens_data data_8916, data_8974, data_8960, data_8996;
++extern const struct tsens_data data_8916, data_8974, data_8960, data_8996, data_ipq8064;
+ 
+ #endif /* __QCOM_TSENS_H__ */
diff --git a/target/linux/ipq806x/patches-4.14/0063-2-tsens-support-configurable-interrupts.patch b/target/linux/ipq806x/patches-4.14/0063-2-tsens-support-configurable-interrupts.patch
new file mode 100644
index 0000000..5682a53
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0063-2-tsens-support-configurable-interrupts.patch
@@ -0,0 +1,453 @@
+From 4e87400732c77765afae2ea89ed43837457aa604 Mon Sep 17 00:00:00 2001
+From: Rajith Cherian <rajith@codeaurora.org>
+Date: Wed, 1 Feb 2017 19:00:26 +0530
+Subject: [PATCH] ipq8064: tsens: Support for configurable interrupts
+
+Provide support for adding configurable high and
+configurable low trip temperatures. An interrupts is
+also triggerred when these trip points are hit. The
+interrupts can be activated or deactivated from sysfs.
+This functionality is made available only if
+CONFIG_THERMAL_WRITABLE_TRIPS is defined.
+
+Change-Id: Ib73f3f9459de4fffce7bb985a0312a88291f4934
+Signed-off-by: Rajith Cherian <rajith@codeaurora.org>
+---
+ .../devicetree/bindings/thermal/qcom-tsens.txt     |  4 ++
+ drivers/thermal/of-thermal.c                       | 63 ++++++++++++++++++----
+ drivers/thermal/qcom/tsens.c                       | 43 ++++++++++++---
+ drivers/thermal/qcom/tsens.h                       | 11 ++++
+ drivers/thermal/thermal_core.c                     | 44 ++++++++++++++-
+ include/linux/thermal.h                            | 14 +++++
+ 6 files changed, 162 insertions(+), 17 deletions(-)
+
+--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
++++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
+@@ -12,11 +12,15 @@ Required properties:
+ - Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify
+ nvmem cells
+ 
++Optional properties:
++- interrupts: Interrupt which gets triggered when threshold is hit
++
+ Example:
+ tsens: thermal-sensor@900000 {
+ 		compatible = "qcom,msm8916-tsens";
+ 		reg = <0x4a8000 0x2000>;
+ 		nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
+ 		nvmem-cell-names = "caldata", "calsel";
++		interrupts = <0 178 0>;
+ 		#thermal-sensor-cells = <1>;
+ 	};
+--- a/drivers/thermal/of-thermal.c
++++ b/drivers/thermal/of-thermal.c
+@@ -95,7 +95,7 @@ static int of_thermal_get_temp(struct th
+ {
+ 	struct __thermal_zone *data = tz->devdata;
+ 
+-	if (!data->ops->get_temp)
++	if (!data->ops->get_temp || (data->mode == THERMAL_DEVICE_DISABLED))
+ 		return -EINVAL;
+ 
+ 	return data->ops->get_temp(data->sensor_data, temp);
+@@ -106,7 +106,8 @@ static int of_thermal_set_trips(struct t
+ {
+ 	struct __thermal_zone *data = tz->devdata;
+ 
+-	if (!data->ops || !data->ops->set_trips)
++	if (!data->ops || !data->ops->set_trips
++			|| (data->mode == THERMAL_DEVICE_DISABLED))
+ 		return -EINVAL;
+ 
+ 	return data->ops->set_trips(data->sensor_data, low, high);
+@@ -192,6 +193,9 @@ static int of_thermal_set_emul_temp(stru
+ {
+ 	struct __thermal_zone *data = tz->devdata;
+ 
++	if (data->mode == THERMAL_DEVICE_DISABLED)
++		return -EINVAL;
++
+ 	return data->ops->set_emul_temp(data->sensor_data, temp);
+ }
+ 
+@@ -200,7 +204,7 @@ static int of_thermal_get_trend(struct t
+ {
+ 	struct __thermal_zone *data = tz->devdata;
+ 
+-	if (!data->ops->get_trend)
++	if (!data->ops->get_trend || (data->mode == THERMAL_DEVICE_DISABLED))
+ 		return -EINVAL;
+ 
+ 	return data->ops->get_trend(data->sensor_data, trip, trend);
+@@ -286,7 +290,9 @@ static int of_thermal_set_mode(struct th
+ 	mutex_unlock(&tz->lock);
+ 
+ 	data->mode = mode;
+-	thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
++
++	if (mode == THERMAL_DEVICE_ENABLED)
++		thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
+ 
+ 	return 0;
+ }
+@@ -296,7 +302,8 @@ static int of_thermal_get_trip_type(stru
+ {
+ 	struct __thermal_zone *data = tz->devdata;
+ 
+-	if (trip >= data->ntrips || trip < 0)
++	if (trip >= data->ntrips || trip < 0
++				|| (data->mode == THERMAL_DEVICE_DISABLED))
+ 		return -EDOM;
+ 
+ 	*type = data->trips[trip].type;
+@@ -304,12 +311,39 @@ static int of_thermal_get_trip_type(stru
+ 	return 0;
+ }
+ 
++static int of_thermal_activate_trip_type(struct thermal_zone_device *tz,
++			int trip, enum thermal_trip_activation_mode mode)
++{
++	struct __thermal_zone *data = tz->devdata;
++
++	if (trip >= data->ntrips || trip < 0
++				|| (data->mode == THERMAL_DEVICE_DISABLED))
++		return -EDOM;
++
++	/*
++	 * The configurable_hi and configurable_lo trip points can be
++	 * activated and deactivated.
++	 */
++
++	if (data->ops->set_trip_activate) {
++		int ret;
++
++		ret = data->ops->set_trip_activate(data->sensor_data,
++								trip, mode);
++		if (ret)
++			return ret;
++	}
++
++	return 0;
++}
++
+ static int of_thermal_get_trip_temp(struct thermal_zone_device *tz, int trip,
+ 				    int *temp)
+ {
+ 	struct __thermal_zone *data = tz->devdata;
+ 
+-	if (trip >= data->ntrips || trip < 0)
++	if (trip >= data->ntrips || trip < 0
++				|| (data->mode == THERMAL_DEVICE_DISABLED))
+ 		return -EDOM;
+ 
+ 	*temp = data->trips[trip].temperature;
+@@ -322,7 +356,8 @@ static int of_thermal_set_trip_temp(stru
+ {
+ 	struct __thermal_zone *data = tz->devdata;
+ 
+-	if (trip >= data->ntrips || trip < 0)
++	if (trip >= data->ntrips || trip < 0
++				|| (data->mode == THERMAL_DEVICE_DISABLED))
+ 		return -EDOM;
+ 
+ 	if (data->ops->set_trip_temp) {
+@@ -344,7 +379,8 @@ static int of_thermal_get_trip_hyst(stru
+ {
+ 	struct __thermal_zone *data = tz->devdata;
+ 
+-	if (trip >= data->ntrips || trip < 0)
++	if (trip >= data->ntrips || trip < 0
++				|| (data->mode == THERMAL_DEVICE_DISABLED))
+ 		return -EDOM;
+ 
+ 	*hyst = data->trips[trip].hysteresis;
+@@ -357,7 +393,8 @@ static int of_thermal_set_trip_hyst(stru
+ {
+ 	struct __thermal_zone *data = tz->devdata;
+ 
+-	if (trip >= data->ntrips || trip < 0)
++	if (trip >= data->ntrips || trip < 0
++				|| (data->mode == THERMAL_DEVICE_DISABLED))
+ 		return -EDOM;
+ 
+ 	/* thermal framework should take care of data->mask & (1 << trip) */
+@@ -432,6 +469,9 @@ thermal_zone_of_add_sensor(struct device
+ 	if (ops->set_emul_temp)
+ 		tzd->ops->set_emul_temp = of_thermal_set_emul_temp;
+ 
++	if (ops->set_trip_activate)
++		tzd->ops->set_trip_activate = of_thermal_activate_trip_type;
++
+ 	mutex_unlock(&tzd->lock);
+ 
+ 	return tzd;
+@@ -726,7 +766,10 @@ static const char * const trip_types[] =
+ 	[THERMAL_TRIP_ACTIVE]	= "active",
+ 	[THERMAL_TRIP_PASSIVE]	= "passive",
+ 	[THERMAL_TRIP_HOT]	= "hot",
+-	[THERMAL_TRIP_CRITICAL]	= "critical",
++	[THERMAL_TRIP_CRITICAL]	= "critical_high",
++	[THERMAL_TRIP_CONFIGURABLE_HI] = "configurable_hi",
++	[THERMAL_TRIP_CONFIGURABLE_LOW] = "configurable_lo",
++	[THERMAL_TRIP_CRITICAL_LOW] = "critical_low",
+ };
+ 
+ /**
+--- a/drivers/thermal/qcom/tsens.c
++++ b/drivers/thermal/qcom/tsens.c
+@@ -31,7 +31,7 @@ static int tsens_get_temp(void *data, in
+ 
+ static int tsens_get_trend(void *p, int trip, enum thermal_trend *trend)
+ {
+-	const struct tsens_sensor *s = p;
++	struct tsens_sensor *s = p;
+ 	struct tsens_device *tmdev = s->tmdev;
+ 
+ 	if (tmdev->ops->get_trend)
+@@ -40,9 +40,10 @@ static int tsens_get_trend(void *p, int
+ 	return -ENOTSUPP;
+ }
+ 
+-static int  __maybe_unused tsens_suspend(struct device *dev)
++static int  __maybe_unused tsens_suspend(void *data)
+ {
+-	struct tsens_device *tmdev = dev_get_drvdata(dev);
++	struct tsens_sensor *s = data;
++	struct tsens_device *tmdev = s->tmdev;
+ 
+ 	if (tmdev->ops && tmdev->ops->suspend)
+ 		return tmdev->ops->suspend(tmdev);
+@@ -50,9 +51,10 @@ static int  __maybe_unused tsens_suspend
+ 	return 0;
+ }
+ 
+-static int __maybe_unused tsens_resume(struct device *dev)
++static int __maybe_unused tsens_resume(void *data)
+ {
+-	struct tsens_device *tmdev = dev_get_drvdata(dev);
++	struct tsens_sensor *s = data;
++	struct tsens_device *tmdev = s->tmdev;
+ 
+ 	if (tmdev->ops && tmdev->ops->resume)
+ 		return tmdev->ops->resume(tmdev);
+@@ -60,6 +62,30 @@ static int __maybe_unused tsens_resume(s
+ 	return 0;
+ }
+ 
++static int  __maybe_unused tsens_set_trip_temp(void *data, int trip, int temp)
++{
++	struct tsens_sensor *s = data;
++	struct tsens_device *tmdev = s->tmdev;
++
++	if (tmdev->ops && tmdev->ops->set_trip_temp)
++		return tmdev->ops->set_trip_temp(s, trip, temp);
++
++	return 0;
++}
++
++static int __maybe_unused tsens_activate_trip_type(void *data, int trip,
++					enum thermal_trip_activation_mode mode)
++{
++	struct tsens_sensor *s = data;
++	struct tsens_device *tmdev = s->tmdev;
++
++	if (tmdev->ops && tmdev->ops->set_trip_activate)
++		return tmdev->ops->set_trip_activate(s, trip, mode);
++
++	return 0;
++}
++
++
+ static SIMPLE_DEV_PM_OPS(tsens_pm_ops, tsens_suspend, tsens_resume);
+ 
+ static const struct of_device_id tsens_table[] = {
+@@ -83,6 +109,8 @@ MODULE_DEVICE_TABLE(of, tsens_table);
+ static const struct thermal_zone_of_device_ops tsens_of_ops = {
+ 	.get_temp = tsens_get_temp,
+ 	.get_trend = tsens_get_trend,
++	.set_trip_temp = tsens_set_trip_temp,
++	.set_trip_activate = tsens_activate_trip_type,
+ };
+ 
+ static int tsens_register(struct tsens_device *tmdev)
+@@ -131,7 +159,7 @@ static int tsens_probe(struct platform_d
+ 	if (id)
+ 		data = id->data;
+ 	else
+-		data = &data_8960;
++		return -EINVAL;
+ 
+ 	if (data->num_sensors <= 0) {
+ 		dev_err(dev, "invalid number of sensors\n");
+@@ -146,6 +174,9 @@ static int tsens_probe(struct platform_d
+ 	tmdev->dev = dev;
+ 	tmdev->num_sensors = data->num_sensors;
+ 	tmdev->ops = data->ops;
++
++	tmdev->tsens_irq = platform_get_irq(pdev, 0);
++
+ 	for (i = 0;  i < tmdev->num_sensors; i++) {
+ 		if (data->hw_ids)
+ 			tmdev->sensor[i].hw_id = data->hw_ids[i];
+--- a/drivers/thermal/qcom/tsens.h
++++ b/drivers/thermal/qcom/tsens.h
+@@ -24,9 +24,12 @@ struct tsens_device;
+ struct tsens_sensor {
+ 	struct tsens_device		*tmdev;
+ 	struct thermal_zone_device	*tzd;
++	struct work_struct		notify_work;
+ 	int				offset;
+ 	int				id;
+ 	int				hw_id;
++	int				calib_data;
++	int				calib_data_backup;
+ 	int				slope;
+ 	u32				status;
+ };
+@@ -41,6 +44,9 @@ struct tsens_sensor {
+  * @suspend: Function to suspend the tsens device
+  * @resume: Function to resume the tsens device
+  * @get_trend: Function to get the thermal/temp trend
++ * @set_trip_temp: Function to set trip temp
++ * @get_trip_temp: Function to get trip temp
++ * @set_trip_activate: Function to activate trip points
+  */
+ struct tsens_ops {
+ 	/* mandatory callbacks */
+@@ -53,6 +59,9 @@ struct tsens_ops {
+ 	int (*suspend)(struct tsens_device *);
+ 	int (*resume)(struct tsens_device *);
+ 	int (*get_trend)(struct tsens_device *, int, enum thermal_trend *);
++	int (*set_trip_temp)(void *, int, int);
++	int (*set_trip_activate)(void *, int,
++					enum thermal_trip_activation_mode);
+ };
+ 
+ /**
+@@ -76,11 +85,13 @@ struct tsens_context {
+ struct tsens_device {
+ 	struct device			*dev;
+ 	u32				num_sensors;
++	u32				tsens_irq;
+ 	struct regmap			*map;
+ 	struct regmap_field		*status_field;
+ 	struct tsens_context		ctx;
+ 	bool				trdy;
+ 	const struct tsens_ops		*ops;
++	struct work_struct		tsens_work;
+ 	struct tsens_sensor		sensor[0];
+ };
+ 
+--- a/drivers/thermal/thermal_sysfs.c
++++ b/drivers/thermal/thermal_sysfs.c
+@@ -115,12 +115,48 @@
+ 		return sprintf(buf, "passive\n");
+ 	case THERMAL_TRIP_ACTIVE:
+ 		return sprintf(buf, "active\n");
++	case THERMAL_TRIP_CONFIGURABLE_HI:
++		return sprintf(buf, "configurable_hi\n");
++	case THERMAL_TRIP_CONFIGURABLE_LOW:
++		return sprintf(buf, "configurable_low\n");
++	case THERMAL_TRIP_CRITICAL_LOW:
++		return sprintf(buf, "critical_low\n");
+ 	default:
+ 		return sprintf(buf, "unknown\n");
+ 	}
+ }
+ 
+ static ssize_t
++trip_point_type_activate(struct device *dev, struct device_attribute *attr,
++						const char *buf, size_t count)
++{
++	struct thermal_zone_device *tz = to_thermal_zone(dev);
++	int trip, ret;
++	char *enabled = "enabled";
++	char *disabled = "disabled";
++
++	if (!tz->ops->set_trip_activate)
++		return -EPERM;
++
++	if (!sscanf(attr->attr.name, "trip_point_%d_type", &trip))
++		return -EINVAL;
++
++	if (!strncmp(buf, enabled, strlen(enabled)))
++		ret = tz->ops->set_trip_activate(tz, trip,
++				THERMAL_TRIP_ACTIVATION_ENABLED);
++	else if (!strncmp(buf, disabled, strlen(disabled)))
++		ret = tz->ops->set_trip_activate(tz, trip,
++				THERMAL_TRIP_ACTIVATION_DISABLED);
++	else
++		ret = -EINVAL;
++
++	if (ret)
++		return ret;
++
++	return count;
++}
++
++static ssize_t
+ trip_point_temp_store(struct device *dev, struct device_attribute *attr,
+ 		      const char *buf, size_t count)
+ {
+@@ -562,6 +598,12 @@
+ 		tz->trip_type_attrs[indx].attr.show = trip_point_type_show;
+ 		attrs[indx] = &tz->trip_type_attrs[indx].attr.attr;
+ 
++		if (IS_ENABLED(CONFIG_THERMAL_WRITABLE_TRIPS)) {
++			tz->trip_type_attrs[indx].attr.store
++						= trip_point_type_activate;
++			tz->trip_type_attrs[indx].attr.attr.mode |= S_IWUSR;
++		}
++
+ 		/* create trip temp attribute */
+ 		snprintf(tz->trip_temp_attrs[indx].name, THERMAL_NAME_LENGTH,
+ 			 "trip_point_%d_temp", indx);
+--- a/include/linux/thermal.h
++++ b/include/linux/thermal.h
+@@ -78,11 +78,19 @@ enum thermal_device_mode {
+ 	THERMAL_DEVICE_ENABLED,
+ };
+ 
++enum thermal_trip_activation_mode {
++	THERMAL_TRIP_ACTIVATION_DISABLED = 0,
++	THERMAL_TRIP_ACTIVATION_ENABLED,
++};
++
+ enum thermal_trip_type {
+ 	THERMAL_TRIP_ACTIVE = 0,
+ 	THERMAL_TRIP_PASSIVE,
+ 	THERMAL_TRIP_HOT,
+ 	THERMAL_TRIP_CRITICAL,
++	THERMAL_TRIP_CONFIGURABLE_HI,
++	THERMAL_TRIP_CONFIGURABLE_LOW,
++	THERMAL_TRIP_CRITICAL_LOW,
+ };
+ 
+ enum thermal_trend {
+@@ -120,6 +128,8 @@ struct thermal_zone_device_ops {
+ 		enum thermal_trip_type *);
+ 	int (*get_trip_temp) (struct thermal_zone_device *, int, int *);
+ 	int (*set_trip_temp) (struct thermal_zone_device *, int, int);
++	int (*set_trip_activate) (struct thermal_zone_device *, int,
++					enum thermal_trip_activation_mode);
+ 	int (*get_trip_hyst) (struct thermal_zone_device *, int, int *);
+ 	int (*set_trip_hyst) (struct thermal_zone_device *, int, int);
+ 	int (*get_crit_temp) (struct thermal_zone_device *, int *);
+@@ -363,6 +373,8 @@ struct thermal_genl_event {
+  *		   temperature.
+  * @set_trip_temp: a pointer to a function that sets the trip temperature on
+  *		   hardware.
++ * @activate_trip_type: a pointer to a function to enable/disable trip
++ *		temperature interrupts
+  */
+ struct thermal_zone_of_device_ops {
+ 	int (*get_temp)(void *, int *);
+@@ -370,6 +382,8 @@ struct thermal_zone_of_device_ops {
+ 	int (*set_trips)(void *, int, int);
+ 	int (*set_emul_temp)(void *, int);
+ 	int (*set_trip_temp)(void *, int, int);
++	int (*set_trip_activate)(void *, int,
++				enum thermal_trip_activation_mode);
+ };
+ 
+ /**
diff --git a/target/linux/ipq806x/patches-4.14/0064-clk-clk-rpm-fixes.patch b/target/linux/ipq806x/patches-4.14/0064-clk-clk-rpm-fixes.patch
new file mode 100644
index 0000000..2d7d4ca
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0064-clk-clk-rpm-fixes.patch
@@ -0,0 +1,93 @@
+From d30840e2b1cf79d90392e6051b0c0b6006d29d8b Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Thu, 9 Mar 2017 09:32:40 +0100
+Subject: [PATCH 64/69] clk: clk-rpm fixes
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ .../devicetree/bindings/clock/qcom,rpmcc.txt       |  1 +
+ drivers/clk/qcom/clk-rpm.c                         | 35 ++++++++++++++++++++++
+ include/dt-bindings/clock/qcom,rpmcc.h             |  4 +++
+ 3 files changed, 40 insertions(+)
+
+--- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
++++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
+@@ -13,6 +13,7 @@ Required properties :
+			"qcom,rpmcc-msm8916", "qcom,rpmcc"
+ 			"qcom,rpmcc-msm8974", "qcom,rpmcc"
+ 			"qcom,rpmcc-apq8064", "qcom,rpmcc"
++			"qcom,rpmcc-ipq806x", "qcom,rpmcc"
+ 
+ - #clock-cells : shall contain 1
+ 
+--- a/drivers/clk/qcom/clk-rpm.c
++++ b/drivers/clk/qcom/clk-rpm.c
+@@ -359,6 +359,16 @@ DEFINE_CLK_RPM(apq8064, sfab_clk, sfab_a
+ DEFINE_CLK_RPM(apq8064, sfpb_clk, sfpb_a_clk, QCOM_RPM_SFPB_CLK);
+ DEFINE_CLK_RPM(apq8064, qdss_clk, qdss_a_clk, QCOM_RPM_QDSS_CLK);
+ 
++/* ipq806x */
++DEFINE_CLK_RPM(ipq806x, afab_clk, afab_a_clk, QCOM_RPM_APPS_FABRIC_CLK);
++DEFINE_CLK_RPM(ipq806x, cfpb_clk, cfpb_a_clk, QCOM_RPM_CFPB_CLK);
++DEFINE_CLK_RPM(ipq806x, daytona_clk, daytona_a_clk, QCOM_RPM_DAYTONA_FABRIC_CLK);
++DEFINE_CLK_RPM(ipq806x, ebi1_clk, ebi1_a_clk, QCOM_RPM_EBI1_CLK);
++DEFINE_CLK_RPM(ipq806x, sfab_clk, sfab_a_clk, QCOM_RPM_SYS_FABRIC_CLK);
++DEFINE_CLK_RPM(ipq806x, sfpb_clk, sfpb_a_clk, QCOM_RPM_SFPB_CLK);
++DEFINE_CLK_RPM(ipq806x, nss_fabric_0_clk, nss_fabric_0_a_clk, QCOM_RPM_NSS_FABRIC_0_CLK);
++DEFINE_CLK_RPM(ipq806x, nss_fabric_1_clk, nss_fabric_1_a_clk, QCOM_RPM_NSS_FABRIC_1_CLK);
++
+ static struct clk_rpm *apq8064_clks[] = {
+ 	[RPM_APPS_FABRIC_CLK] = &apq8064_afab_clk,
+ 	[RPM_APPS_FABRIC_A_CLK] = &apq8064_afab_a_clk,
+@@ -380,13 +390,38 @@ static struct clk_rpm *apq8064_clks[] =
+ 	[RPM_QDSS_A_CLK] = &apq8064_qdss_a_clk,
+ };
+ 
++static struct clk_rpm *ipq806x_clks[] = {
++	[RPM_APPS_FABRIC_CLK] = &ipq806x_afab_clk,
++	[RPM_APPS_FABRIC_A_CLK] = &ipq806x_afab_a_clk,
++	[RPM_CFPB_CLK] = &ipq806x_cfpb_clk,
++	[RPM_CFPB_A_CLK] = &ipq806x_cfpb_a_clk,
++	[RPM_DAYTONA_FABRIC_CLK] = &ipq806x_daytona_clk,
++	[RPM_DAYTONA_FABRIC_A_CLK] = &ipq806x_daytona_a_clk,
++	[RPM_EBI1_CLK] = &ipq806x_ebi1_clk,
++	[RPM_EBI1_A_CLK] = &ipq806x_ebi1_a_clk,
++	[RPM_SYS_FABRIC_CLK] = &ipq806x_sfab_clk,
++	[RPM_SYS_FABRIC_A_CLK] = &ipq806x_sfab_a_clk,
++	[RPM_SFPB_CLK] = &ipq806x_sfpb_clk,
++	[RPM_SFPB_A_CLK] = &ipq806x_sfpb_a_clk,
++	[RPM_NSS_FABRIC_0_CLK] = &ipq806x_nss_fabric_0_clk,
++	[RPM_NSS_FABRIC_0_A_CLK] = &ipq806x_nss_fabric_0_a_clk,
++	[RPM_NSS_FABRIC_1_CLK] = &ipq806x_nss_fabric_1_clk,
++	[RPM_NSS_FABRIC_1_A_CLK] = &ipq806x_nss_fabric_1_a_clk,
++};
++
+ static const struct rpm_clk_desc rpm_clk_apq8064 = {
+ 	.clks = apq8064_clks,
+ 	.num_clks = ARRAY_SIZE(apq8064_clks),
+ };
+ 
++static const struct rpm_clk_desc rpm_clk_ipq806x = {
++	.clks = ipq806x_clks,
++	.num_clks = ARRAY_SIZE(ipq806x_clks),
++};
++
+ static const struct of_device_id rpm_clk_match_table[] = {
+ 	{ .compatible = "qcom,rpmcc-apq8064", .data = &rpm_clk_apq8064 },
++	{ .compatible = "qcom,rpmcc-ipq806x", .data = &rpm_clk_ipq806x },
+ 	{ }
+ };
+ MODULE_DEVICE_TABLE(of, rpm_clk_match_table);
+--- a/include/dt-bindings/clock/qcom,rpmcc.h
++++ b/include/dt-bindings/clock/qcom,rpmcc.h
+@@ -37,6 +37,10 @@
+ #define RPM_SYS_FABRIC_A_CLK			19
+ #define RPM_SFPB_CLK				20
+ #define RPM_SFPB_A_CLK				21
++#define RPM_NSS_FABRIC_0_CLK				22
++#define RPM_NSS_FABRIC_0_A_CLK				23
++#define RPM_NSS_FABRIC_1_CLK				24
++#define RPM_NSS_FABRIC_1_A_CLK				25
+ 
+ /* SMD RPM clocks */
+ #define RPM_SMD_XO_CLK_SRC				0
diff --git a/target/linux/ipq806x/patches-4.14/0065-arm-override-compiler-flags.patch b/target/linux/ipq806x/patches-4.14/0065-arm-override-compiler-flags.patch
new file mode 100644
index 0000000..0d2a427
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0065-arm-override-compiler-flags.patch
@@ -0,0 +1,21 @@
+From 4d8e29642661397a339ac3485f212c6360445421 Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Thu, 9 Mar 2017 09:33:32 +0100
+Subject: [PATCH 65/69] arm: override compiler flags
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ arch/arm/Makefile | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/arm/Makefile
++++ b/arch/arm/Makefile
+@@ -67,7 +67,7 @@ KBUILD_CFLAGS	+= $(call cc-option,-fno-i
+ # macro, but instead defines a whole series of macros which makes
+ # testing for a specific architecture or later rather impossible.
+ arch-$(CONFIG_CPU_32v7M)	=-D__LINUX_ARM_ARCH__=7 -march=armv7-m -Wa,-march=armv7-m
+-arch-$(CONFIG_CPU_32v7)		=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a)
++arch-$(CONFIG_CPU_32v7)		=-D__LINUX_ARM_ARCH__=7 -mcpu=cortex-a15
+ arch-$(CONFIG_CPU_32v6)		=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
+ # Only override the compiler option if ARMv6. The ARMv6K extensions are
+ # always available in ARMv7
diff --git a/target/linux/ipq806x/patches-4.14/0066-GPIO-add-named-gpio-exports.patch b/target/linux/ipq806x/patches-4.14/0066-GPIO-add-named-gpio-exports.patch
new file mode 100644
index 0000000..aa61091
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0066-GPIO-add-named-gpio-exports.patch
@@ -0,0 +1,166 @@
+From a37b0c9113647b2120cf1a18cfc46afdb3f1fccc Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 12 Aug 2014 20:49:27 +0200
+Subject: [PATCH 66/69] GPIO: add named gpio exports
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/gpio/gpiolib-of.c     | 68 +++++++++++++++++++++++++++++++++++++++++++
+ drivers/gpio/gpiolib-sysfs.c  | 10 ++++++-
+ include/asm-generic/gpio.h    |  6 ++++
+ include/linux/gpio/consumer.h |  8 +++++
+ 4 files changed, 91 insertions(+), 1 deletion(-)
+
+--- a/drivers/gpio/gpiolib-of.c
++++ b/drivers/gpio/gpiolib-of.c
+@@ -23,6 +23,8 @@
+ #include <linux/pinctrl/pinctrl.h>
+ #include <linux/slab.h>
+ #include <linux/gpio/machine.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
+ 
+ #include "gpiolib.h"
+ 
+@@ -506,3 +508,69 @@ void of_gpiochip_remove(struct gpio_chip
+ 	gpiochip_remove_pin_ranges(chip);
+ 	of_node_put(chip->of_node);
+ }
++
++static struct of_device_id gpio_export_ids[] = {
++	{ .compatible = "gpio-export" },
++	{ /* sentinel */ }
++};
++
++static int __init of_gpio_export_probe(struct platform_device *pdev)
++{
++	struct device_node *np = pdev->dev.of_node;
++	struct device_node *cnp;
++	u32 val;
++	int nb = 0;
++
++	for_each_child_of_node(np, cnp) {
++		const char *name = NULL;
++		int gpio;
++		bool dmc;
++		int max_gpio = 1;
++		int i;
++
++		of_property_read_string(cnp, "gpio-export,name", &name);
++
++		if (!name)
++			max_gpio = of_gpio_count(cnp);
++
++		for (i = 0; i < max_gpio; i++) {
++			unsigned flags = 0;
++			enum of_gpio_flags of_flags;
++
++			gpio = of_get_gpio_flags(cnp, i, &of_flags);
++
++			if (of_flags == OF_GPIO_ACTIVE_LOW)
++				flags |= GPIOF_ACTIVE_LOW;
++
++			if (!of_property_read_u32(cnp, "gpio-export,output", &val))
++				flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
++			else
++				flags |= GPIOF_IN;
++
++			if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np)))
++				continue;
++
++			dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change");
++			gpio_export_with_name(gpio, dmc, name);
++			nb++;
++		}
++	}
++
++	dev_info(&pdev->dev, "%d gpio(s) exported\n", nb);
++
++	return 0;
++}
++
++static struct platform_driver gpio_export_driver = {
++	.driver		= {
++		.name		= "gpio-export",
++		.owner	= THIS_MODULE,
++		.of_match_table	= of_match_ptr(gpio_export_ids),
++	},
++};
++
++static int __init of_gpio_export_init(void)
++{
++	return platform_driver_probe(&gpio_export_driver, of_gpio_export_probe);
++}
++device_initcall(of_gpio_export_init);
+--- a/drivers/gpio/gpiolib-sysfs.c
++++ b/drivers/gpio/gpiolib-sysfs.c
+@@ -553,7 +553,7 @@ static struct class gpio_class = {
+  *
+  * Returns zero on success, else an error.
+  */
+-int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
++int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name)
+ {
+ 	struct gpio_chip	*chip;
+ 	struct gpio_device	*gdev;
+@@ -615,6 +615,8 @@ int gpiod_export(struct gpio_desc *desc,
+ 	offset = gpio_chip_hwgpio(desc);
+ 	if (chip->names && chip->names[offset])
+ 		ioname = chip->names[offset];
++	if (name)
++		ioname = name;
+ 
+ 	dev = device_create_with_groups(&gpio_class, &gdev->dev,
+ 					MKDEV(0, 0), data, gpio_groups,
+@@ -636,6 +638,12 @@ err_unlock:
+ 	gpiod_dbg(desc, "%s: status %d\n", __func__, status);
+ 	return status;
+ }
++EXPORT_SYMBOL_GPL(__gpiod_export);
++
++int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
++{
++	return __gpiod_export(desc, direction_may_change, NULL);
++}
+ EXPORT_SYMBOL_GPL(gpiod_export);
+ 
+ static int match_export(struct device *dev, const void *desc)
+--- a/include/asm-generic/gpio.h
++++ b/include/asm-generic/gpio.h
+@@ -127,6 +127,12 @@ static inline int gpio_export(unsigned g
+ 	return gpiod_export(gpio_to_desc(gpio), direction_may_change);
+ }
+ 
++int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
++static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name)
++{
++	return __gpiod_export(gpio_to_desc(gpio), direction_may_change, name);
++}
++
+ static inline int gpio_export_link(struct device *dev, const char *name,
+ 				   unsigned gpio)
+ {
+--- a/include/linux/gpio/consumer.h
++++ b/include/linux/gpio/consumer.h
+@@ -451,6 +451,7 @@ static inline struct gpio_desc *devm_get
+ 
+ #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS)
+ 
++int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
+ int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
+ int gpiod_export_link(struct device *dev, const char *name,
+ 		      struct gpio_desc *desc);
+@@ -458,6 +459,13 @@ void gpiod_unexport(struct gpio_desc *de
+ 
+ #else  /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */
+ 
++static inline int _gpiod_export(struct gpio_desc *desc,
++			       bool direction_may_change,
++			       const char *name)
++{
++	return -ENOSYS;
++}
++
+ static inline int gpiod_export(struct gpio_desc *desc,
+ 			       bool direction_may_change)
+ {
diff --git a/target/linux/ipq806x/patches-4.14/0067-generic-Mangle-bootloader-s-kernel-arguments.patch b/target/linux/ipq806x/patches-4.14/0067-generic-Mangle-bootloader-s-kernel-arguments.patch
new file mode 100644
index 0000000..85947b1
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0067-generic-Mangle-bootloader-s-kernel-arguments.patch
@@ -0,0 +1,189 @@
+From 71270226b14733a4b1f2cde58ea9265caa50b38d Mon Sep 17 00:00:00 2001
+From: Adrian Panella <ianchi74@outlook.com>
+Date: Thu, 9 Mar 2017 09:37:17 +0100
+Subject: [PATCH 67/69] generic: Mangle bootloader's kernel arguments
+
+The command-line arguments provided by the boot loader will be
+appended to a new device tree property: bootloader-args.
+If there is a property "append-rootblock" in DT under /chosen
+and a root= option in bootloaders command line it will be parsed
+and added to DT bootargs with the form: <append-rootblock>XX.
+Only command line ATAG will be processed, the rest of the ATAGs
+sent by bootloader will be ignored.
+This is usefull in dual boot systems, to get the current root partition
+without afecting the rest of the system.
+
+Signed-off-by: Adrian Panella <ianchi74@outlook.com>
+---
+ arch/arm/Kconfig                        | 11 +++++
+ arch/arm/boot/compressed/atags_to_fdt.c | 72 ++++++++++++++++++++++++++++++++-
+ init/main.c                             | 16 ++++++++
+ 3 files changed, 98 insertions(+), 1 deletion(-)
+
+--- a/arch/arm/Kconfig
++++ b/arch/arm/Kconfig
+@@ -1938,6 +1938,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
+ 	  The command-line arguments provided by the boot loader will be
+ 	  appended to the the device tree bootargs property.
+ 
++config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
++	bool "Append rootblock parsing bootloader's kernel arguments"
++	help
++	  The command-line arguments provided by the boot loader will be
++	  appended to a new device tree property: bootloader-args.
++	  If there is a property "append-rootblock" in DT under /chosen 
++	  and a root= option in bootloaders command line it will be parsed 
++	  and added to DT bootargs with the form: <append-rootblock>XX.
++	  Only command line ATAG will be processed, the rest of the ATAGs
++	  sent by bootloader will be ignored.
++
+ endchoice
+ 
+ config CMDLINE
+--- a/arch/arm/boot/compressed/atags_to_fdt.c
++++ b/arch/arm/boot/compressed/atags_to_fdt.c
+@@ -4,6 +4,8 @@
+ 
+ #if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND)
+ #define do_extend_cmdline 1
++#elif defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
++#define do_extend_cmdline 1
+ #else
+ #define do_extend_cmdline 0
+ #endif
+@@ -67,6 +69,59 @@ static uint32_t get_cell_size(const void
+ 	return cell_size;
+ }
+ 
++#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
++
++static char *append_rootblock(char *dest, const char *str, int len, void *fdt)
++{
++	char *ptr, *end;
++	char *root="root=";
++	int i, l;
++	const char *rootblock;
++
++	//ARM doesn't have __HAVE_ARCH_STRSTR, so search manually
++	ptr = str - 1;
++
++	do {
++		//first find an 'r' at the begining or after a space
++		do {
++			ptr++;
++			ptr = strchr(ptr, 'r');
++			if(!ptr) return dest;
++
++		} while (ptr != str && *(ptr-1) != ' ');
++
++		//then check for the rest
++		for(i = 1; i <= 4; i++)
++			if(*(ptr+i) != *(root+i)) break;
++
++	} while (i != 5);
++
++	end = strchr(ptr, ' ');
++	end = end ? (end - 1) : (strchr(ptr, 0) - 1);
++
++	//find partition number (assumes format root=/dev/mtdXX | /dev/mtdblockXX | yy:XX )
++	for( i = 0; end >= ptr && *end >= '0' && *end <= '9'; end--, i++);
++	ptr = end + 1;
++
++	/* if append-rootblock property is set use it to append to command line */
++	rootblock = getprop(fdt, "/chosen", "append-rootblock", &l);
++	if(rootblock != NULL) {
++		if(*dest != ' ') {
++			*dest = ' ';
++			dest++;
++			len++;
++		}
++		if (len + l + i <= COMMAND_LINE_SIZE) {
++			memcpy(dest, rootblock, l);
++			dest += l - 1;
++			memcpy(dest, ptr, i);
++			dest += i;
++		}
++	}
++	return dest;
++}
++#endif
++
+ static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline)
+ {
+ 	char cmdline[COMMAND_LINE_SIZE];
+@@ -86,12 +141,21 @@ static void merge_fdt_bootargs(void *fdt
+ 
+ 	/* and append the ATAG_CMDLINE */
+ 	if (fdt_cmdline) {
++
++#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
++		//save original bootloader args
++		//and append ubi.mtd with root partition number to current cmdline
++		setprop_string(fdt, "/chosen", "bootloader-args", fdt_cmdline);
++		ptr = append_rootblock(ptr, fdt_cmdline, len, fdt);
++
++#else
+ 		len = strlen(fdt_cmdline);
+ 		if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) {
+ 			*ptr++ = ' ';
+ 			memcpy(ptr, fdt_cmdline, len);
+ 			ptr += len;
+ 		}
++#endif
+ 	}
+ 	*ptr = '\0';
+ 
+@@ -148,7 +212,9 @@ int atags_to_fdt(void *atag_list, void *
+ 			else
+ 				setprop_string(fdt, "/chosen", "bootargs",
+ 					       atag->u.cmdline.cmdline);
+-		} else if (atag->hdr.tag == ATAG_MEM) {
++		}
++#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
++		else if (atag->hdr.tag == ATAG_MEM) {
+ 			if (memcount >= sizeof(mem_reg_property)/4)
+ 				continue;
+ 			if (!atag->u.mem.size)
+@@ -187,6 +253,10 @@ int atags_to_fdt(void *atag_list, void *
+ 		setprop(fdt, "/memory", "reg", mem_reg_property,
+ 			4 * memcount * memsize);
+ 	}
++#else
++
++	}
++#endif
+ 
+ 	return fdt_pack(fdt);
+ }
+--- a/init/main.c
++++ b/init/main.c
+@@ -95,6 +95,10 @@
+ #include <asm/sections.h>
+ #include <asm/cacheflush.h>
+ 
++#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
++#include <linux/of.h>
++#endif
++
+ static int kernel_init(void *);
+ 
+ extern void init_IRQ(void);
+@@ -574,6 +578,18 @@ asmlinkage __visible void __init start_k
+ 	page_alloc_init();
+ 
+ 	pr_notice("Kernel command line: %s\n", boot_command_line);
++
++#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
++	//Show bootloader's original command line for reference
++	if(of_chosen) {
++		const char *prop = of_get_property(of_chosen, "bootloader-args", NULL);
++		if(prop)
++			pr_notice("Bootloader command line (ignored): %s\n", prop);
++		else
++			pr_notice("Bootloader command line not present\n");
++	}
++#endif
++
+ 	parse_early_param();
+ 	after_dashes = parse_args("Booting kernel",
+ 				  static_command_line, __start___param,
diff --git a/target/linux/ipq806x/patches-4.14/0069-arm-boot-add-dts-files.patch b/target/linux/ipq806x/patches-4.14/0069-arm-boot-add-dts-files.patch
new file mode 100644
index 0000000..fead994
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0069-arm-boot-add-dts-files.patch
@@ -0,0 +1,28 @@
+From 8f68331e14dff9a101f2d0e1d6bec84a031f27ee Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Thu, 9 Mar 2017 11:03:18 +0100
+Subject: [PATCH 69/69] arm: boot: add dts files
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ arch/arm/boot/dts/Makefile | 8 ++++++++
+ 1 file changed, 8 insertions(+)
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -699,6 +699,15 @@ dtb-$(CONFIG_ARCH_QCOM) += \
+ 	qcom-apq8084-mtp.dtb \
+ 	qcom-ipq4019-ap.dk01.1-c1.dtb \
+ 	qcom-ipq8064-ap148.dtb \
++	qcom-ipq8064-c2600.dtb \
++	qcom-ipq8064-d7800.dtb \
++	qcom-ipq8064-db149.dtb \
++	qcom-ipq8064-ea8500.dtb \
++	qcom-ipq8064-r7500.dtb \
++	qcom-ipq8064-r7500v2.dtb \
++	qcom-ipq8064-wpq864.dtb \
++	qcom-ipq8065-nbg6817.dtb \
++	qcom-ipq8065-r7800.dtb \
+ 	qcom-msm8660-surf.dtb \
+ 	qcom-msm8960-cdp.dtb \
+ 	qcom-msm8974-lge-nexus5-hammerhead.dtb \
diff --git a/target/linux/ipq806x/patches-4.14/0070-qcom-spm-fix-probe-order.patch b/target/linux/ipq806x/patches-4.14/0070-qcom-spm-fix-probe-order.patch
new file mode 100644
index 0000000..b7e375d
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0070-qcom-spm-fix-probe-order.patch
@@ -0,0 +1,16 @@
+Check for SCM availability before attempting to use SPM
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+
+--- a/drivers/soc/qcom/spm.c
++++ b/drivers/soc/qcom/spm.c
+@@ -219,6 +219,9 @@ static int __init qcom_cpuidle_init(stru
+ 	cpumask_t mask;
+ 	bool use_scm_power_down = false;
+ 
++	if (!qcom_scm_is_available())
++		return -EPROBE_DEFER;
++
+ 	for (i = 0; ; i++) {
+ 		state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i);
+ 		if (!state_node)
diff --git a/target/linux/ipq806x/patches-4.14/0071-1-PCI-qcom-Fixed-IPQ806x-specific-clocks.patch b/target/linux/ipq806x/patches-4.14/0071-1-PCI-qcom-Fixed-IPQ806x-specific-clocks.patch
new file mode 100644
index 0000000..58bd489
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0071-1-PCI-qcom-Fixed-IPQ806x-specific-clocks.patch
@@ -0,0 +1,95 @@
+From 86655aa14304ca88a8ce8847276147dbc1a83238 Mon Sep 17 00:00:00 2001
+From: Sham Muthayyan <smuthayy@codeaurora.org>
+Date: Tue, 19 Jul 2016 18:44:49 +0530
+Subject: PCI: qcom: Fixed IPQ806x specific clocks
+
+Change-Id: I488e1bc707d6a22b37a338f41935e3922009ba5e
+Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
+---
+ drivers/pci/host/pcie-qcom.c | 38 +++++++++++++++++++++++++++++++++-----
+ 1 file changed, 33 insertions(+), 5 deletions(-)
+
+--- a/drivers/pci/dwc/pcie-qcom.c
++++ b/drivers/pci/dwc/pcie-qcom.c
+@@ -91,6 +91,8 @@
+ 	struct clk *iface_clk;
+ 	struct clk *core_clk;
+ 	struct clk *phy_clk;
++	struct clk *aux_clk;
++	struct clk *ref_clk;
+ 	struct reset_control *pci_reset;
+ 	struct reset_control *axi_reset;
+ 	struct reset_control *ahb_reset;
+@@ -249,6 +251,14 @@
+ 	if (IS_ERR(res->phy_clk))
+ 		return PTR_ERR(res->phy_clk);
+ 
++	res->aux_clk = devm_clk_get(dev, "aux");
++	if (IS_ERR(res->aux_clk))
++		return PTR_ERR(res->aux_clk);
++
++	res->ref_clk = devm_clk_get(dev, "ref");
++	if (IS_ERR(res->ref_clk))
++		return PTR_ERR(res->ref_clk);
++
+ 	res->pci_reset = devm_reset_control_get_exclusive(dev, "pci");
+ 	if (IS_ERR(res->pci_reset))
+ 		return PTR_ERR(res->pci_reset);
+@@ -281,6 +291,8 @@
+ 	clk_disable_unprepare(res->iface_clk);
+ 	clk_disable_unprepare(res->core_clk);
+ 	clk_disable_unprepare(res->phy_clk);
++	clk_disable_unprepare(res->aux_clk);
++	clk_disable_unprepare(res->ref_clk);
+ 	regulator_disable(res->vdda);
+ 	regulator_disable(res->vdda_phy);
+ 	regulator_disable(res->vdda_refclk);
+@@ -324,16 +336,28 @@
+ 		goto err_assert_ahb;
+ 	}
+ 
++	ret = clk_prepare_enable(res->core_clk);
++	if (ret) {
++		dev_err(dev, "cannot prepare/enable core clock\n");
++		goto err_clk_core;
++	}
++
+ 	ret = clk_prepare_enable(res->phy_clk);
+ 	if (ret) {
+ 		dev_err(dev, "cannot prepare/enable phy clock\n");
+ 		goto err_clk_phy;
+ 	}
+ 
+-	ret = clk_prepare_enable(res->core_clk);
++	ret = clk_prepare_enable(res->aux_clk);
+ 	if (ret) {
+-		dev_err(dev, "cannot prepare/enable core clock\n");
+-		goto err_clk_core;
++		dev_err(dev, "cannot prepare/enable aux clock\n");
++		goto err_clk_aux;
++	}
++
++	ret = clk_prepare_enable(res->ref_clk);
++	if (ret) {
++		dev_err(dev, "cannot prepare/enable ref clock\n");
++		goto err_clk_ref;
+ 	}
+ 
+ 	ret = reset_control_deassert(res->ahb_reset);
+@@ -389,10 +413,14 @@
+ 	return 0;
+ 
+ err_deassert_ahb:
+-	clk_disable_unprepare(res->core_clk);
+-err_clk_core:
++	clk_disable_unprepare(res->ref_clk);
++err_clk_ref:
++	clk_disable_unprepare(res->aux_clk);
++err_clk_aux:
+ 	clk_disable_unprepare(res->phy_clk);
+ err_clk_phy:
++	clk_disable_unprepare(res->core_clk);
++err_clk_core:
+ 	clk_disable_unprepare(res->iface_clk);
+ err_assert_ahb:
+ 	regulator_disable(res->vdda_phy);
diff --git a/target/linux/ipq806x/patches-4.14/0071-2-PCI-qcom-Fixed-IPQ806x-PCIE-reset-changes.patch b/target/linux/ipq806x/patches-4.14/0071-2-PCI-qcom-Fixed-IPQ806x-PCIE-reset-changes.patch
new file mode 100644
index 0000000..4b15e8f
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0071-2-PCI-qcom-Fixed-IPQ806x-PCIE-reset-changes.patch
@@ -0,0 +1,85 @@
+From 490d103232287eb51c92c49a4ef8865fd0a9d59e Mon Sep 17 00:00:00 2001
+From: Sham Muthayyan <smuthayy@codeaurora.org>
+Date: Tue, 19 Jul 2016 18:58:18 +0530
+Subject: PCI: qcom: Fixed IPQ806x PCIE reset changes
+
+Change-Id: Ia6590e960b9754b1e8b7a51f318788cd63e9e321
+Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
+---
+ drivers/pci/host/pcie-qcom.c | 24 +++++++++++++++++++-----
+ 1 file changed, 19 insertions(+), 5 deletions(-)
+
+--- a/drivers/pci/dwc/pcie-qcom.c
++++ b/drivers/pci/dwc/pcie-qcom.c
+@@ -98,6 +98,7 @@
+ 	struct reset_control *ahb_reset;
+ 	struct reset_control *por_reset;
+ 	struct reset_control *phy_reset;
++	struct reset_control *ext_reset;
+ 	struct regulator *vdda;
+ 	struct regulator *vdda_phy;
+ 	struct regulator *vdda_refclk;
+@@ -277,6 +278,10 @@
+ 
+ 	res->phy_reset = devm_reset_control_get_exclusive(dev, "phy");
+ 	return PTR_ERR_OR_ZERO(res->phy_reset);
++
++	res->ext_reset = devm_reset_control_get(dev, "ext");
++	if (IS_ERR(res->ext_reset))
++		return PTR_ERR(res->ext_reset);
+ }
+ 
+ static void qcom_pcie_deinit_2_1_0(struct qcom_pcie *pcie)
+@@ -288,6 +293,7 @@
+ 	reset_control_assert(res->ahb_reset);
+ 	reset_control_assert(res->por_reset);
+ 	reset_control_assert(res->pci_reset);
++	reset_control_assert(res->ext_reset);
+ 	clk_disable_unprepare(res->iface_clk);
+ 	clk_disable_unprepare(res->core_clk);
+ 	clk_disable_unprepare(res->phy_clk);
+@@ -306,6 +312,12 @@
+ 	u32 val;
+ 	int ret;
+ 
++	ret = reset_control_assert(res->ahb_reset);
++	if (ret) {
++		dev_err(dev, "cannot assert ahb reset\n");
++		return ret;
++	}
++
+ 	ret = regulator_enable(res->vdda);
+ 	if (ret) {
+ 		dev_err(dev, "cannot enable vdda regulator\n");
+@@ -324,16 +336,16 @@
+ 		goto err_vdda_phy;
+ 	}
+ 
+-	ret = reset_control_assert(res->ahb_reset);
++	ret = reset_control_deassert(res->ext_reset);
+ 	if (ret) {
+-		dev_err(dev, "cannot assert ahb reset\n");
+-		goto err_assert_ahb;
++		dev_err(dev, "cannot assert ext reset\n");
++		goto err_reset_ext;
+ 	}
+ 
+ 	ret = clk_prepare_enable(res->iface_clk);
+ 	if (ret) {
+ 		dev_err(dev, "cannot prepare/enable iface clock\n");
+-		goto err_assert_ahb;
++		goto err_iface;
+ 	}
+ 
+ 	ret = clk_prepare_enable(res->core_clk);
+@@ -422,7 +434,9 @@
+ 	clk_disable_unprepare(res->core_clk);
+ err_clk_core:
+ 	clk_disable_unprepare(res->iface_clk);
+-err_assert_ahb:
++err_iface:
++	reset_control_assert(res->ext_reset);
++err_reset_ext:
+ 	regulator_disable(res->vdda_phy);
+ err_vdda_phy:
+ 	regulator_disable(res->vdda_refclk);
diff --git a/target/linux/ipq806x/patches-4.14/0071-3-PCI-qcom-Fixed-IPQ806x-PCIE-init-changes.patch b/target/linux/ipq806x/patches-4.14/0071-3-PCI-qcom-Fixed-IPQ806x-PCIE-init-changes.patch
new file mode 100644
index 0000000..060857f
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0071-3-PCI-qcom-Fixed-IPQ806x-PCIE-init-changes.patch
@@ -0,0 +1,127 @@
+From eddd13215d0f2b549ebc5f0e8796d5b1231f90a0 Mon Sep 17 00:00:00 2001
+From: Sham Muthayyan <smuthayy@codeaurora.org>
+Date: Tue, 19 Jul 2016 19:58:22 +0530
+Subject: PCI: qcom: Fixed IPQ806x PCIE init changes
+
+Change-Id: Ic319b1aec27a47809284759f8fcb6a8815b7cf7e
+Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
+---
+ drivers/pci/host/pcie-qcom.c | 62 +++++++++++++++++++++++++++++++++++++-------
+ 1 file changed, 53 insertions(+), 9 deletions(-)
+
+--- a/drivers/pci/dwc/pcie-qcom.c
++++ b/drivers/pci/dwc/pcie-qcom.c
+@@ -52,7 +52,13 @@
+ #define PCIE_CAP_CPL_TIMEOUT_DISABLE		0x10
+ 
+ #define PCIE20_PARF_PHY_CTRL			0x40
++#define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK	(0x1f << 16)
++#define PHY_CTRL_PHY_TX0_TERM_OFFSET(x)		(x << 16)
++
+ #define PCIE20_PARF_PHY_REFCLK			0x4C
++#define REF_SSP_EN				BIT(16)
++#define REF_USE_PAD				BIT(12)
++
+ #define PCIE20_PARF_DBI_BASE_ADDR		0x168
+ #define PCIE20_PARF_SLV_ADDR_SPACE_SIZE		0x16C
+ #define PCIE20_PARF_MHI_CLOCK_RESET_CTRL	0x174
+@@ -83,6 +89,18 @@
+ #define DBI_RO_WR_EN				1
+ 
+ #define PERST_DELAY_US				1000
++/* PARF registers */
++#define PCIE20_PARF_PCS_DEEMPH			0x34
++#define PCS_DEEMPH_TX_DEEMPH_GEN1(x)		(x << 16)
++#define PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(x)	(x << 8)
++#define PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(x)	(x << 0)
++
++#define PCIE20_PARF_PCS_SWING			0x38
++#define PCS_SWING_TX_SWING_FULL(x)		(x << 8)
++#define PCS_SWING_TX_SWING_LOW(x)		(x << 0)
++
++#define PCIE20_PARF_CONFIG_BITS			0x50
++#define PHY_RX0_EQ(x)				(x << 24)
+ 
+ #define PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE	0x358
+ #define SLV_ADDR_SPACE_SZ			0x10000000
+@@ -102,6 +120,7 @@
+ 	struct regulator *vdda;
+ 	struct regulator *vdda_phy;
+ 	struct regulator *vdda_refclk;
++	uint8_t phy_tx0_term_offset;
+ };
+ 
+ struct qcom_pcie_resources_1_0_0 {
+@@ -179,6 +198,16 @@
+ 
+ #define to_qcom_pcie(x)		dev_get_drvdata((x)->dev)
+ 
++static inline void
++writel_masked(void __iomem *addr, u32 clear_mask, u32 set_mask)
++{
++	u32 val = readl(addr);
++
++	val &= ~clear_mask;
++	val |= set_mask;
++	writel(val, addr);
++}
++
+ static void qcom_ep_reset_assert(struct qcom_pcie *pcie)
+ {
+ 	gpiod_set_value_cansleep(pcie->reset, 1);
+@@ -282,6 +311,11 @@
+ 	res->ext_reset = devm_reset_control_get(dev, "ext");
+ 	if (IS_ERR(res->ext_reset))
+ 		return PTR_ERR(res->ext_reset);
++
++	if (of_property_read_u8(dev->of_node, "phy-tx0-term-offset",
++				&res->phy_tx0_term_offset))
++		res->phy_tx0_term_offset = 0;
++
+ }
+ 
+ static void qcom_pcie_deinit_2_1_0(struct qcom_pcie *pcie)
+@@ -309,7 +343,6 @@
+ 	struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
+ 	struct dw_pcie *pci = pcie->pci;
+ 	struct device *dev = pci->dev;
+-	u32 val;
+ 	int ret;
+ 
+ 	ret = reset_control_assert(res->ahb_reset);
+@@ -378,15 +411,26 @@
+ 		goto err_deassert_ahb;
+ 	}
+ 
+-	/* enable PCIe clocks and resets */
+-	val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
+-	val &= ~BIT(0);
+-	writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
+-
+-	/* enable external reference clock */
+-	val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK);
+-	val |= BIT(16);
+-	writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK);
++	writel_masked(pcie->parf + PCIE20_PARF_PHY_CTRL, BIT(0), 0);
++
++	/* Set Tx termination offset */
++	writel_masked(pcie->parf + PCIE20_PARF_PHY_CTRL,
++		      PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK,
++		      PHY_CTRL_PHY_TX0_TERM_OFFSET(res->phy_tx0_term_offset));
++
++	/* PARF programming */
++	writel(PCS_DEEMPH_TX_DEEMPH_GEN1(0x18) |
++	       PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(0x18) |
++	       PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(0x22),
++	       pcie->parf + PCIE20_PARF_PCS_DEEMPH);
++	writel(PCS_SWING_TX_SWING_FULL(0x78) |
++	       PCS_SWING_TX_SWING_LOW(0x78),
++	       pcie->parf + PCIE20_PARF_PCS_SWING);
++	writel(PHY_RX0_EQ(0x4), pcie->parf + PCIE20_PARF_CONFIG_BITS);
++
++	/* Enable reference clock */
++	writel_masked(pcie->parf + PCIE20_PARF_PHY_REFCLK,
++		      REF_USE_PAD, REF_SSP_EN);
+ 
+ 	ret = reset_control_deassert(res->phy_reset);
+ 	if (ret) {
diff --git a/target/linux/ipq806x/patches-4.14/0071-5-PCI-qcom-Programming-the-PCIE-iATU-for-IPQ806x.patch b/target/linux/ipq806x/patches-4.14/0071-5-PCI-qcom-Programming-the-PCIE-iATU-for-IPQ806x.patch
new file mode 100644
index 0000000..395dccb
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0071-5-PCI-qcom-Programming-the-PCIE-iATU-for-IPQ806x.patch
@@ -0,0 +1,114 @@
+From d27c303e828d7e42f339a459d2abfe30c51698e9 Mon Sep 17 00:00:00 2001
+From: Sham Muthayyan <smuthayy@codeaurora.org>
+Date: Tue, 26 Jul 2016 12:28:31 +0530
+Subject: PCI: qcom: Programming the PCIE iATU for IPQ806x
+
+Resolved PCIE EP detection errors caused due to missing iATU programming.
+
+Change-Id: Ie95c0f8cb940abc0192a8a3c4e825ddba54b72fe
+Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
+---
+ drivers/pci/host/pcie-qcom.c | 77 ++++++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 77 insertions(+)
+
+--- a/drivers/pci/dwc/pcie-qcom.c
++++ b/drivers/pci/dwc/pcie-qcom.c
+@@ -83,6 +83,30 @@
+ #define PCIE20_CAP_LINK_1			(PCIE20_CAP + 0x14)
+ #define PCIE_CAP_LINK1_VAL			0x2FD7F
+ 
++#define PCIE20_CAP_LINKCTRLSTATUS		(PCIE20_CAP + 0x10)
++
++#define PCIE20_AXI_MSTR_RESP_COMP_CTRL0		0x818
++#define PCIE20_AXI_MSTR_RESP_COMP_CTRL1		0x81c
++
++#define PCIE20_PLR_IATU_VIEWPORT		0x900
++#define PCIE20_PLR_IATU_REGION_OUTBOUND		(0x0 << 31)
++#define PCIE20_PLR_IATU_REGION_INDEX(x)		(x << 0)
++
++#define PCIE20_PLR_IATU_CTRL1			0x904
++#define PCIE20_PLR_IATU_TYPE_CFG0		(0x4 << 0)
++#define PCIE20_PLR_IATU_TYPE_MEM		(0x0 << 0)
++
++#define PCIE20_PLR_IATU_CTRL2			0x908
++#define PCIE20_PLR_IATU_ENABLE			BIT(31)
++
++#define PCIE20_PLR_IATU_LBAR			0x90C
++#define PCIE20_PLR_IATU_UBAR			0x910
++#define PCIE20_PLR_IATU_LAR			0x914
++#define PCIE20_PLR_IATU_LTAR			0x918
++#define PCIE20_PLR_IATU_UTAR			0x91c
++
++#define MSM_PCIE_DEV_CFG_ADDR			0x01000000
++
+ #define PCIE20_PARF_Q2A_FLUSH			0x1AC
+ 
+ #define PCIE20_MISC_CONTROL_1_REG		0x8BC
+@@ -251,6 +275,57 @@
+ 	writel(val, pcie->elbi + PCIE20_ELBI_SYS_CTRL);
+ }
+ 
++static void qcom_pcie_prog_viewport_cfg0(struct qcom_pcie *pcie, u32 busdev)
++{
++	struct pcie_port *pp = &pcie->pci->pp;
++
++	/*
++	 * program and enable address translation region 0 (device config
++	 * address space); region type config;
++	 * axi config address range to device config address range
++	 */
++	writel(PCIE20_PLR_IATU_REGION_OUTBOUND |
++	       PCIE20_PLR_IATU_REGION_INDEX(0),
++	       pcie->pci->dbi_base + PCIE20_PLR_IATU_VIEWPORT);
++
++	writel(PCIE20_PLR_IATU_TYPE_CFG0, pcie->pci->dbi_base + PCIE20_PLR_IATU_CTRL1);
++	writel(PCIE20_PLR_IATU_ENABLE, pcie->pci->dbi_base + PCIE20_PLR_IATU_CTRL2);
++	writel(pp->cfg0_base, pcie->pci->dbi_base + PCIE20_PLR_IATU_LBAR);
++	writel((pp->cfg0_base >> 32), pcie->pci->dbi_base + PCIE20_PLR_IATU_UBAR);
++	writel((pp->cfg0_base + pp->cfg0_size - 1),
++	       pcie->pci->dbi_base + PCIE20_PLR_IATU_LAR);
++	writel(busdev, pcie->pci->dbi_base + PCIE20_PLR_IATU_LTAR);
++	writel(0, pcie->pci->dbi_base + PCIE20_PLR_IATU_UTAR);
++}
++
++static void qcom_pcie_prog_viewport_mem2_outbound(struct qcom_pcie *pcie)
++{
++	struct pcie_port *pp = &pcie->pci->pp;
++
++	/*
++	 * program and enable address translation region 2 (device resource
++	 * address space); region type memory;
++	 * axi device bar address range to device bar address range
++	 */
++	writel(PCIE20_PLR_IATU_REGION_OUTBOUND |
++	       PCIE20_PLR_IATU_REGION_INDEX(2),
++	       pcie->pci->dbi_base + PCIE20_PLR_IATU_VIEWPORT);
++
++	writel(PCIE20_PLR_IATU_TYPE_MEM, pcie->pci->dbi_base + PCIE20_PLR_IATU_CTRL1);
++	writel(PCIE20_PLR_IATU_ENABLE, pcie->pci->dbi_base + PCIE20_PLR_IATU_CTRL2);
++	writel(pp->mem_base, pcie->pci->dbi_base + PCIE20_PLR_IATU_LBAR);
++	writel((pp->mem_base >> 32), pcie->pci->dbi_base + PCIE20_PLR_IATU_UBAR);
++	writel(pp->mem_base + pp->mem_size - 1,
++	       pcie->pci->dbi_base + PCIE20_PLR_IATU_LAR);
++	writel(pp->mem_bus_addr, pcie->pci->dbi_base + PCIE20_PLR_IATU_LTAR);
++	writel(upper_32_bits(pp->mem_bus_addr),
++	       pcie->pci->dbi_base + PCIE20_PLR_IATU_UTAR);
++
++	/* 256B PCIE buffer setting */
++	writel(0x1, pcie->pci->dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL0);
++	writel(0x1, pcie->pci->dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL1);
++}
++
+ static int qcom_pcie_get_resources_2_1_0(struct qcom_pcie *pcie)
+ {
+ 	struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
+@@ -466,6 +541,9 @@
+ 	writel(CFG_BRIDGE_SB_INIT,
+ 	       pci->dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL1);
+ 
++	qcom_pcie_prog_viewport_cfg0(pcie, MSM_PCIE_DEV_CFG_ADDR);
++	qcom_pcie_prog_viewport_mem2_outbound(pcie);
++
+ 	return 0;
+ 
+ err_deassert_ahb:
diff --git a/target/linux/ipq806x/patches-4.14/0071-6-PCI-qcom-Force-GEN1-support.patch b/target/linux/ipq806x/patches-4.14/0071-6-PCI-qcom-Force-GEN1-support.patch
new file mode 100644
index 0000000..da05a84
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0071-6-PCI-qcom-Force-GEN1-support.patch
@@ -0,0 +1,61 @@
+From 4910cfd150342ec7b038892262923c725a9c4001 Mon Sep 17 00:00:00 2001
+From: Sham Muthayyan <smuthayy@codeaurora.org>
+Date: Wed, 7 Sep 2016 16:44:28 +0530
+Subject: PCI: qcom: Force GEN1 support
+
+Change-Id: Ica54ddb737d7b851469deab1745f54bf431bd3f0
+Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
+---
+ drivers/pci/host/pcie-qcom.c | 13 +++++++++++++
+ 1 file changed, 13 insertions(+)
+
+--- a/drivers/pci/dwc/pcie-qcom.c
++++ b/drivers/pci/dwc/pcie-qcom.c
+@@ -129,6 +129,8 @@
+ #define PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE	0x358
+ #define SLV_ADDR_SPACE_SZ			0x10000000
+ 
++#define PCIE20_LNK_CONTROL2_LINK_STATUS2        0xA0
++
+ struct qcom_pcie_resources_2_1_0 {
+ 	struct clk *iface_clk;
+ 	struct clk *core_clk;
+@@ -218,6 +220,7 @@
+ 	struct phy *phy;
+ 	struct gpio_desc *reset;
+ 	struct qcom_pcie_ops *ops;
++	uint32_t force_gen1;
+ };
+ 
+ #define to_qcom_pcie(x)		dev_get_drvdata((x)->dev)
+@@ -533,6 +536,11 @@
+ 
+ 	/* wait for clock acquisition */
+ 	usleep_range(1000, 1500);
++	if (pcie->force_gen1) {
++		writel_relaxed((readl_relaxed(
++			pcie->pci->dbi_base + PCIE20_LNK_CONTROL2_LINK_STATUS2) | 1),
++			pcie->pci->dbi_base + PCIE20_LNK_CONTROL2_LINK_STATUS2);
++	}
+ 
+ 
+ 	/* Set the Max TLP size to 2K, instead of using default of 4K */
+@@ -1383,6 +1391,8 @@
+ 	struct dw_pcie *pci;
+ 	struct qcom_pcie *pcie;
+ 	int ret;
++	uint32_t force_gen1 = 0;
++	struct device_node *np = pdev->dev.of_node;
+ 
+ 	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
+ 	if (!pcie)
+@@ -1404,6 +1414,9 @@
+ 	if (IS_ERR(pcie->reset))
+ 		return PTR_ERR(pcie->reset);
+ 
++	of_property_read_u32(np, "force_gen1", &force_gen1);
++	pcie->force_gen1 = force_gen1;
++
+ 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "parf");
+ 	pcie->parf = devm_ioremap_resource(dev, res);
+ 	if (IS_ERR(pcie->parf))
diff --git a/target/linux/ipq806x/patches-4.14/0071-7-pcie-Set-PCIE-MRRS-and-MPS-to-256B.patch b/target/linux/ipq806x/patches-4.14/0071-7-pcie-Set-PCIE-MRRS-and-MPS-to-256B.patch
new file mode 100644
index 0000000..bdfef28
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0071-7-pcie-Set-PCIE-MRRS-and-MPS-to-256B.patch
@@ -0,0 +1,69 @@
+From edff8f777c6321ca89bb950a382f409c4a126e28 Mon Sep 17 00:00:00 2001
+From: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
+Date: Thu, 15 Dec 2016 17:38:18 +0530
+Subject: pcie: Set PCIE MRRS and MPS to 256B
+
+Set Max Read Request Size and Max Payload Size to 256 bytes,
+per chip team recommendation.
+
+Change-Id: I097004be2ced1b3096ffc10c318aae0b2bb155e8
+Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
+---
+ drivers/pci/host/pcie-qcom.c | 37 +++++++++++++++++++++++++++++++++++++
+ 1 file changed, 37 insertions(+)
+
+(limited to 'drivers/pci/host/pcie-qcom.c')
+
+--- a/drivers/pci/dwc/pcie-qcom.c
++++ b/drivers/pci/dwc/pcie-qcom.c
+@@ -131,6 +131,14 @@
+ 
+ #define PCIE20_LNK_CONTROL2_LINK_STATUS2        0xA0
+ 
++#define __set(v, a, b)	(((v) << (b)) & GENMASK(a, b))
++#define __mask(a, b)	(((1 << ((a) + 1)) - 1) & ~((1 << (b)) - 1))
++#define PCIE20_DEV_CAS			0x78
++#define PCIE20_MRRS_MASK		__mask(14, 12)
++#define PCIE20_MRRS(x)			__set(x, 14, 12)
++#define PCIE20_MPS_MASK			__mask(7, 5)
++#define PCIE20_MPS(x)			__set(x, 7, 5)
++
+ struct qcom_pcie_resources_2_1_0 {
+ 	struct clk *iface_clk;
+ 	struct clk *core_clk;
+@@ -1473,6 +1481,35 @@
+ 	return 0;
+ }
+ 
++static void qcom_pcie_fixup_final(struct pci_dev *dev)
++{
++	int cap, err;
++	u16 ctl, reg_val;
++
++	cap = pci_pcie_cap(dev);
++	if (!cap)
++		return;
++
++	err = pci_read_config_word(dev, cap + PCI_EXP_DEVCTL, &ctl);
++
++	if (err)
++		return;
++
++	reg_val = ctl;
++
++	if (((reg_val & PCIE20_MRRS_MASK) >> 12) > 1)
++		reg_val = (reg_val & ~(PCIE20_MRRS_MASK)) | PCIE20_MRRS(0x1);
++
++	if (((ctl & PCIE20_MPS_MASK) >> 5) > 1)
++		reg_val = (reg_val & ~(PCIE20_MPS_MASK)) | PCIE20_MPS(0x1);
++
++	err = pci_write_config_word(dev, cap + PCI_EXP_DEVCTL, reg_val);
++
++	if (err)
++		pr_err("pcie config write failed %d\n", err);
++}
++DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, qcom_pcie_fixup_final);
++
+ static const struct of_device_id qcom_pcie_match[] = {
+ 	{ .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 },
+ 	{ .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 },
diff --git a/target/linux/ipq806x/patches-4.14/0071-8-pcie-qcom-Fixed-pcie_phy_clk-branch-issue.patch b/target/linux/ipq806x/patches-4.14/0071-8-pcie-qcom-Fixed-pcie_phy_clk-branch-issue.patch
new file mode 100644
index 0000000..1ad0b0f
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0071-8-pcie-qcom-Fixed-pcie_phy_clk-branch-issue.patch
@@ -0,0 +1,91 @@
+From b74bab6186131eea09459eedf5d737645a3559c9 Mon Sep 17 00:00:00 2001
+From: Abhishek Sahu <absahu@codeaurora.org>
+Date: Thu, 22 Dec 2016 11:18:45 +0530
+Subject: pcie: qcom: Fixed pcie_phy_clk branch issue
+
+Following backtraces are observed in PCIe deinit operation.
+
+ Hardware name: Qualcomm (Flattened Device Tree)
+ (unwind_backtrace) from [] (show_stack+0x10/0x14)
+ (show_stack) from [] (dump_stack+0x84/0x98)
+ (dump_stack) from [] (warn_slowpath_common+0x9c/0xb8)
+ (warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40)
+ (warn_slowpath_fmt) from [] (clk_branch_wait+0x114/0x120)
+ (clk_branch_wait) from [] (clk_core_disable+0xd0/0x1f4)
+ (clk_core_disable) from [] (clk_disable+0x24/0x30)
+ (clk_disable) from [] (qcom_pcie_deinit_v0+0x6c/0xb8)
+ (qcom_pcie_deinit_v0) from [] (qcom_pcie_host_init+0xe0/0xe8)
+ (qcom_pcie_host_init) from [] (dw_pcie_host_init+0x3b0/0x538)
+ (dw_pcie_host_init) from [] (qcom_pcie_probe+0x20c/0x2e4)
+
+pcie_phy_clk is generated for PCIe controller itself and the
+GCC controls its branch operation. This error is coming since
+the assert operations turn off the parent clock before branch
+clock. Now this patch moves clk_disable_unprepare before assert
+operations.
+
+Similarly, during probe function, the clock branch operation
+should be done after dessert operation. Currently, it does not
+generate any error since bootloader enables the pcie_phy_clk
+but the same error is coming during probe, if bootloader
+disables pcie_phy_clk.
+
+Change-Id: Ib29c154d10eb64363d9cc982ce5fd8107af5627d
+Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
+---
+ drivers/pci/host/pcie-qcom.c | 16 +++++++---------
+ 1 file changed, 7 insertions(+), 9 deletions(-)
+
+--- a/drivers/pci/dwc/pcie-qcom.c
++++ b/drivers/pci/dwc/pcie-qcom.c
+@@ -408,6 +408,7 @@
+ {
+ 	struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
+ 
++	clk_disable_unprepare(res->phy_clk);
+ 	reset_control_assert(res->pci_reset);
+ 	reset_control_assert(res->axi_reset);
+ 	reset_control_assert(res->ahb_reset);
+@@ -416,7 +417,6 @@
+ 	reset_control_assert(res->ext_reset);
+ 	clk_disable_unprepare(res->iface_clk);
+ 	clk_disable_unprepare(res->core_clk);
+-	clk_disable_unprepare(res->phy_clk);
+ 	clk_disable_unprepare(res->aux_clk);
+ 	clk_disable_unprepare(res->ref_clk);
+ 	regulator_disable(res->vdda);
+@@ -473,12 +473,6 @@
+ 		goto err_clk_core;
+ 	}
+ 
+-	ret = clk_prepare_enable(res->phy_clk);
+-	if (ret) {
+-		dev_err(dev, "cannot prepare/enable phy clock\n");
+-		goto err_clk_phy;
+-	}
+-
+ 	ret = clk_prepare_enable(res->aux_clk);
+ 	if (ret) {
+ 		dev_err(dev, "cannot prepare/enable aux clock\n");
+@@ -542,6 +536,12 @@
+ 		return ret;
+ 	}
+ 
++	ret = clk_prepare_enable(res->phy_clk);
++	if (ret) {
++		dev_err(dev, "cannot prepare/enable phy clock\n");
++		goto err_deassert_ahb;
++	}
++
+ 	/* wait for clock acquisition */
+ 	usleep_range(1000, 1500);
+	if (pcie->force_gen1) {
+@@ -567,8 +567,6 @@
+ err_clk_ref:
+ 	clk_disable_unprepare(res->aux_clk);
+ err_clk_aux:
+-	clk_disable_unprepare(res->phy_clk);
+-err_clk_phy:
+ 	clk_disable_unprepare(res->core_clk);
+ err_clk_core:
+ 	clk_disable_unprepare(res->iface_clk);
diff --git a/target/linux/ipq806x/patches-4.14/0071-9-pcie-qcom-change-duplicate-pci-reset-to-phy-reset.patch b/target/linux/ipq806x/patches-4.14/0071-9-pcie-qcom-change-duplicate-pci-reset-to-phy-reset.patch
new file mode 100644
index 0000000..e3a48da
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0071-9-pcie-qcom-change-duplicate-pci-reset-to-phy-reset.patch
@@ -0,0 +1,25 @@
+From 1a9c48123bd09f75562b6a2ee0f0a7b2d533cd45 Mon Sep 17 00:00:00 2001
+From: Abhishek Sahu <absahu@codeaurora.org>
+Date: Thu, 22 Dec 2016 11:50:49 +0530
+Subject: pcie: qcom: change duplicate pci reset to phy reset
+
+The deinit issues reset_control_assert for pci twice and
+does not contain phy reset.
+
+Change-Id: Iba849963c7e5f9a2a1063f0e2e89635df70b8a99
+Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
+---
+ drivers/pci/host/pcie-qcom.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/pci/dwc/pcie-qcom.c
++++ b/drivers/pci/dwc/pcie-qcom.c
+@@ -409,7 +409,7 @@
+ 	struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
+ 
+ 	clk_disable_unprepare(res->phy_clk);
+-	reset_control_assert(res->pci_reset);
++	reset_control_assert(res->phy_reset);
+ 	reset_control_assert(res->axi_reset);
+ 	reset_control_assert(res->ahb_reset);
+ 	reset_control_assert(res->por_reset);
diff --git a/target/linux/ipq806x/patches-4.14/0072-add-ipq806x-with-no-clocks.patch b/target/linux/ipq806x/patches-4.14/0072-add-ipq806x-with-no-clocks.patch
new file mode 100644
index 0000000..f6b798c
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0072-add-ipq806x-with-no-clocks.patch
@@ -0,0 +1,12 @@
+--- a/drivers/firmware/qcom_scm.c
++++ b/drivers/firmware/qcom_scm.c
+@@ -422,6 +422,9 @@
+ 	{ .compatible = "qcom,scm-msm8996",
+ 	  .data = NULL, /* no clocks */
+ 	},
++	{ .compatible = "qcom,scm-ipq806x",
++	  .data = NULL, /* no clocks */
++	},
+ 	{ .compatible = "qcom,scm",
+ 	  .data = (void *)(SCM_HAS_CORE_CLK
+ 			   | SCM_HAS_IFACE_CLK
diff --git a/target/linux/ipq806x/patches-4.14/0073-pinctrl-qom-use-scm_call-to-route-GPIO-irq-to-Apps.patch b/target/linux/ipq806x/patches-4.14/0073-pinctrl-qom-use-scm_call-to-route-GPIO-irq-to-Apps.patch
new file mode 100644
index 0000000..dc0bc79
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0073-pinctrl-qom-use-scm_call-to-route-GPIO-irq-to-Apps.patch
@@ -0,0 +1,183 @@
+From 2034addc7e193dc81d7ca60d8884832751b76758 Mon Sep 17 00:00:00 2001
+From: Ajay Kishore <akisho@codeaurora.org>
+Date: Tue, 24 Jan 2017 14:14:16 +0530
+Subject: pinctrl: qcom: use scm_call to route GPIO irq to Apps
+
+For IPQ806x targets, TZ protects the registers that are used to
+configure the routing of interrupts to a target processor.
+To resolve this, this patch uses scm call to route GPIO interrupts
+to application processor. Also the scm call interface is changed.
+
+Change-Id: Ib6c06829d04bc8c20483c36e63da92e26cdef9ce
+Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
+---
+ drivers/firmware/qcom_scm-32.c     | 17 +++++++++++++++++
+ drivers/firmware/qcom_scm-64.c     |  9 +++++++++
+ drivers/firmware/qcom_scm.c        | 13 +++++++++++++
+ drivers/firmware/qcom_scm.h        |  8 ++++++++
+ drivers/pinctrl/qcom/pinctrl-msm.c | 34 ++++++++++++++++++++++++++++------
+ include/linux/qcom_scm.h           |  3 ++-
+ 6 files changed, 77 insertions(+), 7 deletions(-)
+
+--- a/drivers/firmware/qcom_scm-32.c
++++ b/drivers/firmware/qcom_scm-32.c
+@@ -561,6 +561,24 @@
+ 	return ret ? : le32_to_cpu(out);
+ }
+ 
++int __qcom_scm_pinmux_read(u32 svc_id, u32 cmd_id, u32 arg1)
++{
++	s32 ret;
++
++	ret = qcom_scm_call_atomic1(svc_id, cmd_id, arg1);
++
++	return ret;
++}
++
++int __qcom_scm_pinmux_write(u32 svc_id, u32 cmd_id, u32 arg1, u32 arg2)
++{
++	s32 ret;
++
++	ret = qcom_scm_call_atomic2(svc_id, cmd_id, arg1, arg2);
++ 
++ return ret;
++}
++
+ int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
+ {
+ 	struct {
+--- a/drivers/firmware/qcom_scm-64.c
++++ b/drivers/firmware/qcom_scm-64.c
+@@ -366,6 +366,16 @@
+ 	return ret ? : res.a1;
+ }
+ 
++int __qcom_scm_pinmux_read(u32 svc_id, u32 cmd_id, u32 arg1)
++{
++	return -ENOTSUPP;
++}
++
++int __qcom_scm_pinmux_write(u32 svc_id, u32 cmd_id, u32 arg1, u32 arg2)
++{
++	return -ENOTSUPP;
++}
++
+ int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
+ {
+ 	struct qcom_scm_desc desc = {0};
+--- a/drivers/firmware/qcom_scm.c
++++ b/drivers/firmware/qcom_scm.c
+@@ -470,3 +470,16 @@ static int __init qcom_scm_init(void)
+ 	return platform_driver_register(&qcom_scm_driver);
+ }
+ subsys_initcall(qcom_scm_init);
++
++int qcom_scm_pinmux_read(u32 arg1)
++{
++	return __qcom_scm_pinmux_read(SCM_SVC_IO_ACCESS, SCM_IO_READ, arg1);
++}
++EXPORT_SYMBOL(qcom_scm_pinmux_read);
++
++int qcom_scm_pinmux_write(u32 arg1, u32 arg2)
++{
++	return __qcom_scm_pinmux_write(SCM_SVC_IO_ACCESS, SCM_IO_WRITE,
++					arg1, arg2);
++}
++EXPORT_SYMBOL(qcom_scm_pinmux_write);
+--- a/drivers/firmware/qcom_scm.h
++++ b/drivers/firmware/qcom_scm.h
+@@ -58,6 +58,13 @@ extern int  __qcom_scm_pas_auth_and_rese
+ extern int  __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral);
+ extern int  __qcom_scm_pas_mss_reset(struct device *dev, bool reset);
+ 
++#define SCM_IO_READ	1
++#define SCM_IO_WRITE	2
++#define SCM_SVC_IO_ACCESS	0x5
++
++s32 __qcom_scm_pinmux_read(u32 svc_id, u32 cmd_id, u32 arg1);
++s32 __qcom_scm_pinmux_write(u32 svc_id, u32 cmd_id, u32 arg1, u32 arg2);
++
+ /* common error codes */
+ #define QCOM_SCM_V2_EBUSY	-12
+ #define QCOM_SCM_ENOMEM		-5
+--- a/drivers/pinctrl/qcom/pinctrl-msm.c
++++ b/drivers/pinctrl/qcom/pinctrl-msm.c
+@@ -30,7 +30,8 @@
+ #include <linux/reboot.h>
+ #include <linux/pm.h>
+ #include <linux/log2.h>
+-
++#include <linux/qcom_scm.h>
++#include <linux/io.h>
+ #include "../core.h"
+ #include "../pinconf.h"
+ #include "pinctrl-msm.h"
+@@ -638,6 +639,9 @@ static int msm_gpio_irq_set_type(struct
+ 	const struct msm_pingroup *g;
+ 	unsigned long flags;
+ 	u32 val;
++	u32 addr;
++	int ret;
++	const __be32 *reg;
+ 
+ 	g = &pctrl->soc->groups[d->hwirq];
+ 
+@@ -676,11 +680,30 @@ static int msm_gpio_irq_set_type(struct
+ 	else
+ 		clear_bit(d->hwirq, pctrl->dual_edge_irqs);
+ 
++	int ret = of_device_is_compatible(pctrl->dev->of_node,
++					"qcom,ipq8064-pinctrl");
+ 	/* Route interrupts to application cpu */
+-	val = readl(pctrl->regs + g->intr_target_reg);
+-	val &= ~(7 << g->intr_target_bit);
+-	val |= g->intr_target_kpss_val << g->intr_target_bit;
+-	writel(val, pctrl->regs + g->intr_target_reg);
++	if (!ret) {
++		val = readl(pctrl->regs + g->intr_target_reg);
++		val &= ~(7 << g->intr_target_bit);
++		val |= g->intr_target_kpss_val << g->intr_target_bit;
++		writel(val, pctrl->regs + g->intr_target_reg);
++	} else {
++		const __be32 *reg = of_get_property(pctrl->dev->of_node, "reg", NULL);
++		if (reg) {
++			u32 addr = be32_to_cpup(reg) + g->intr_target_reg;
++			val = qcom_scm_pinmux_read(addr);
++			__iormb();
++
++			val &= ~(7 << g->intr_target_bit);
++			val |= g->intr_target_kpss_val << g->intr_target_bit;
++
++			__iowmb();
++			ret = qcom_scm_pinmux_write(addr, val);
++			if (ret)
++				pr_err("\n Routing interrupts to Apps proc failed");
++		}
++	}
+ 
+ 	/* Update configuration for gpio.
+ 	 * RAW_STATUS_EN is left on for all gpio irqs. Due to the
+@@ -954,4 +977,3 @@ int msm_pinctrl_remove(struct platform_d
+ 	return 0;
+ }
+ EXPORT_SYMBOL(msm_pinctrl_remove);
+-
+--- a/include/linux/qcom_scm.h
++++ b/include/linux/qcom_scm.h
+@@ -43,6 +43,8 @@
+ extern int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare);
+ extern int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size);
+ extern int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare);
++extern s32 qcom_scm_pinmux_read(u32 arg1);
++extern s32 qcom_scm_pinmux_write(u32 arg1, u32 arg2);
+ #else
+ static inline
+ int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
+@@ -73,5 +75,7 @@
+ static inline int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare) { return -ENODEV; }
+ static inline int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size) { return -ENODEV; }
+ static inline int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare) { return -ENODEV; }
++extern s32 qcom_scm_pinmux_read(u32 arg1) { return -ENODEV; }
++extern s32 qcom_scm_pinmux_write(u32 arg1, u32 arg2) { return -ENODEV; } 
+ #endif
+ #endif
diff --git a/target/linux/ipq806x/patches-4.14/0074-ipq806x-usb-Control-USB-master-reset.patch b/target/linux/ipq806x/patches-4.14/0074-ipq806x-usb-Control-USB-master-reset.patch
new file mode 100644
index 0000000..1aad32d
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0074-ipq806x-usb-Control-USB-master-reset.patch
@@ -0,0 +1,71 @@
+From a86bda9f8a7965f0cedd347a9c04800eb9f41ea3 Mon Sep 17 00:00:00 2001
+From: Vasudevan Murugesan <vmuruges@codeaurora.org>
+Date: Tue, 21 Jul 2015 10:22:38 +0530
+Subject: ipq806x: usb: Control USB master reset
+
+During removal of the glue layer(dwc3-of-simple),
+USB master reset is set to active and during insertion
+it is de-activated.
+
+Change-Id: I537dc810f6cb2a46664ee674840145066432b957
+Signed-off-by: Vasudevan Murugesan <vmuruges@codeaurora.org>
+(cherry picked from commit 4611e13580a216812f85f0801b95442d02eeb836)
+---
+ drivers/usb/dwc3/dwc3-of-simple.c | 22 ++++++++++++++++++++++
+ 1 file changed, 12 insertions(+)
+
+(limited to 'drivers/usb/dwc3/dwc3-of-simple.c')
+
+--- a/drivers/usb/dwc3/dwc3-of-simple.c
++++ b/drivers/usb/dwc3/dwc3-of-simple.c
+@@ -25,6 +25,7 @@
+ #include <linux/platform_device.h>
+ #include <linux/dma-mapping.h>
+ #include <linux/clk.h>
++#include <linux/reset.h>
+ #include <linux/of.h>
+ #include <linux/of_platform.h>
+ #include <linux/pm_runtime.h>
+@@ -33,6 +34,8 @@
+ 	struct device		*dev;
+ 	struct clk		**clks;
+ 	int			num_clocks;
++	struct reset_control	*mstr_rst_30_0;
++	struct reset_control	*mstr_rst_30_1;
+ };
+ 
+ static int dwc3_of_simple_clk_init(struct dwc3_of_simple *simple, int count)
+@@ -102,6 +105,20 @@
+ 	if (ret)
+ 		return ret;
+ 
++	simple->mstr_rst_30_0 = devm_reset_control_get(dev, "usb30_0_mstr_rst");
++
++	if (!IS_ERR(simple->mstr_rst_30_0))
++		reset_control_deassert(simple->mstr_rst_30_0);
++	else
++		dev_dbg(simple->dev, "cannot get handle for USB PHY 0 master reset control\n");
++
++	simple->mstr_rst_30_1 = devm_reset_control_get(dev, "usb30_1_mstr_rst");
++
++	if (!IS_ERR(simple->mstr_rst_30_1))
++		reset_control_deassert(simple->mstr_rst_30_1);
++	else
++		dev_dbg(simple->dev, "cannot get handle for USB PHY 1 master reset control\n");
++
+ 	ret = of_platform_populate(np, NULL, NULL, dev);
+ 	if (ret) {
+ 		for (i = 0; i < simple->num_clocks; i++) {
+@@ -130,6 +147,12 @@
+ 		clk_put(simple->clks[i]);
+ 	}
+ 
++	if (!IS_ERR(simple->mstr_rst_30_0))
++		reset_control_assert(simple->mstr_rst_30_0);
++
++	if (!IS_ERR(simple->mstr_rst_30_1))
++		reset_control_assert(simple->mstr_rst_30_1);
++
+ 	of_platform_depopulate(dev);
+ 
+ 	pm_runtime_put_sync(dev);
diff --git a/target/linux/ipq806x/patches-4.14/104-mtd-nand-add-Winbond-manufacturer-and-chip.patch b/target/linux/ipq806x/patches-4.14/104-mtd-nand-add-Winbond-manufacturer-and-chip.patch
new file mode 100644
index 0000000..295bc16
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/104-mtd-nand-add-Winbond-manufacturer-and-chip.patch
@@ -0,0 +1,38 @@
+From 07b6d0cdbbda8c917480eceaec668f09e4cf24a5 Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@gmail.com>
+Date: Mon, 14 Nov 2016 23:49:22 +0100
+Subject: [PATCH] mtd: nand: add Winbond manufacturer and chip
+
+This patch adds the W25N01GV NAND to the table of
+known devices. Without this patch the device gets detected:
+
+nand: device found, Manufacturer ID: 0xef, Chip ID: 0xaa
+nand: Unknown NAND 256MiB 1,8V 8-bit
+nand: 256 MiB, SLC, erase size: 64 KiB, page size: 1024, OOB size : 16
+
+Whereas the u-boot identifies it as:
+spi_nand: spi_nand_flash_probe SF NAND ID 00:ef:aa:21
+SF: Detected W25N01GV with page size 2 KiB, total 128 MiB
+
+Due to the page size discrepancy, it's impossible to attach
+ubi volumes on the device.
+
+Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+---
+ drivers/mtd/nand/nand_ids.c | 4 ++++
+ include/linux/mtd/nand.h    | 1 +
+ 2 files changed, 5 insertions(+)
+
+--- a/drivers/mtd/nand/nand_ids.c
++++ b/drivers/mtd/nand/nand_ids.c
+@@ -54,6 +54,10 @@ struct nand_flash_dev nand_flash_ids[] =
+ 		{ .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} },
+ 		  SZ_8K, SZ_8K, SZ_2M, NAND_NEED_SCRAMBLING, 6, 640,
+ 		  NAND_ECC_INFO(40, SZ_1K), 4 },
++	{"W25N01GV 1G 3.3V 8-bit",
++		{ .id = {0xef, 0xaa} },
++		  SZ_2K, SZ_128, SZ_128K, NAND_NO_SUBPAGE_WRITE,
++		  2, 64, NAND_ECC_INFO(1, SZ_512) },
+ 
+ 	LEGACY_ID_NAND("NAND 4MiB 5V 8-bit",   0x6B, 4, SZ_8K, SP_OPTIONS),
+ 	LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS),
diff --git a/target/linux/ipq806x/patches-4.14/105-mtd-nor-add-mx25l25635f.patch b/target/linux/ipq806x/patches-4.14/105-mtd-nor-add-mx25l25635f.patch
new file mode 100644
index 0000000..038ed59
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/105-mtd-nor-add-mx25l25635f.patch
@@ -0,0 +1,22 @@
+Subject: mtd: spi-nor: add mx25l25635f with SECT_4K
+
+This patch fixes an issue with the creation of the
+ubi volume on the AVM FRITZ!Box 4040. The mx25l25635f
+and mx25l25635e support SECT_4K which will set the
+erase size to 4K. This is used by ubi to calculate
+VID header offsets. Without this, uboot and linux
+disagrees about the layout and refuse to attach
+the ubi volume created by the other.
+
+---
+--- a/drivers/mtd/spi-nor/spi-nor.c
++++ b/drivers/mtd/spi-nor/spi-nor.c
+@@ -1023,7 +1023,7 @@
+ 	{ "mx25u6435f",  INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) },
+ 	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
+ 	{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
+-	{ "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
++	{ "mx25l25635f", INFO(0xc22019, 0, 64 * 1024, 512, SECT_4K) },
+ 	{ "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) },
+ 	{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
+ 	{ "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
diff --git a/target/linux/ipq806x/patches-4.14/310-msm-adhoc-bus-support.patch b/target/linux/ipq806x/patches-4.14/310-msm-adhoc-bus-support.patch
new file mode 100644
index 0000000..cd9fd89
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/310-msm-adhoc-bus-support.patch
@@ -0,0 +1,11026 @@
+From: Christian Lamparter <chunkeey@googlemail.com>
+Subject: BUS: add MSM_BUS
+--- a/drivers/bus/Makefile
++++ b/drivers/bus/Makefile
+@@ -11,6 +11,7 @@ obj-$(CONFIG_BRCMSTB_GISB_ARB)	+= brcmst
+ obj-$(CONFIG_IMX_WEIM)		+= imx-weim.o
+ obj-$(CONFIG_MIPS_CDMM)		+= mips_cdmm.o
+ obj-$(CONFIG_MVEBU_MBUS) 	+= mvebu-mbus.o
++obj-$(CONFIG_BUS_TOPOLOGY_ADHOC)+= msm_bus/
+ 
+ # Interconnect bus driver for OMAP SoCs.
+ obj-$(CONFIG_OMAP_INTERCONNECT)	+= omap_l3_smx.o omap_l3_noc.o
+--- a/drivers/bus/Kconfig
++++ b/drivers/bus/Kconfig
+@@ -93,6 +93,8 @@ config MVEBU_MBUS
+ 	  Driver needed for the MBus configuration on Marvell EBU SoCs
+ 	  (Kirkwood, Dove, Orion5x, MV78XX0 and Armada 370/XP).
+ 
++source "drivers/bus/msm_bus/Kconfig"
++
+ config OMAP_INTERCONNECT
+ 	tristate "OMAP INTERCONNECT DRIVER"
+ 	depends on ARCH_OMAP2PLUS
+--- /dev/null
++++ b/include/dt-bindings/msm/msm-bus-ids.h
+@@ -0,0 +1,869 @@
++/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++
++#ifndef __MSM_BUS_IDS_H
++#define __MSM_BUS_IDS_H
++
++/* Topology related enums */
++#define	MSM_BUS_FAB_DEFAULT 0
++#define	MSM_BUS_FAB_APPSS 0
++#define	MSM_BUS_FAB_SYSTEM 1024
++#define	MSM_BUS_FAB_MMSS 2048
++#define	MSM_BUS_FAB_SYSTEM_FPB 3072
++#define	MSM_BUS_FAB_CPSS_FPB 4096
++
++#define	MSM_BUS_FAB_BIMC 0
++#define	MSM_BUS_FAB_SYS_NOC 1024
++#define	MSM_BUS_FAB_MMSS_NOC 2048
++#define	MSM_BUS_FAB_OCMEM_NOC 3072
++#define	MSM_BUS_FAB_PERIPH_NOC 4096
++#define	MSM_BUS_FAB_CONFIG_NOC 5120
++#define	MSM_BUS_FAB_OCMEM_VNOC 6144
++#define	MSM_BUS_FAB_MMSS_AHB 2049
++#define	MSM_BUS_FAB_A0_NOC 6145
++#define	MSM_BUS_FAB_A1_NOC 6146
++#define	MSM_BUS_FAB_A2_NOC 6147
++
++#define	MSM_BUS_MASTER_FIRST 1
++#define	MSM_BUS_MASTER_AMPSS_M0 1
++#define	MSM_BUS_MASTER_AMPSS_M1 2
++#define	MSM_BUS_APPSS_MASTER_FAB_MMSS 3
++#define	MSM_BUS_APPSS_MASTER_FAB_SYSTEM 4
++#define	MSM_BUS_SYSTEM_MASTER_FAB_APPSS 5
++#define	MSM_BUS_MASTER_SPS 6
++#define	MSM_BUS_MASTER_ADM_PORT0 7
++#define	MSM_BUS_MASTER_ADM_PORT1 8
++#define	MSM_BUS_SYSTEM_MASTER_ADM1_PORT0 9
++#define	MSM_BUS_MASTER_ADM1_PORT1 10
++#define	MSM_BUS_MASTER_LPASS_PROC 11
++#define	MSM_BUS_MASTER_MSS_PROCI 12
++#define	MSM_BUS_MASTER_MSS_PROCD 13
++#define	MSM_BUS_MASTER_MSS_MDM_PORT0 14
++#define	MSM_BUS_MASTER_LPASS 15
++#define	MSM_BUS_SYSTEM_MASTER_CPSS_FPB 16
++#define	MSM_BUS_SYSTEM_MASTER_SYSTEM_FPB 17
++#define	MSM_BUS_SYSTEM_MASTER_MMSS_FPB 18
++#define	MSM_BUS_MASTER_ADM1_CI 19
++#define	MSM_BUS_MASTER_ADM0_CI 20
++#define	MSM_BUS_MASTER_MSS_MDM_PORT1 21
++#define	MSM_BUS_MASTER_MDP_PORT0 22
++#define	MSM_BUS_MASTER_MDP_PORT1 23
++#define	MSM_BUS_MMSS_MASTER_ADM1_PORT0 24
++#define	MSM_BUS_MASTER_ROTATOR 25
++#define	MSM_BUS_MASTER_GRAPHICS_3D 26
++#define	MSM_BUS_MASTER_JPEG_DEC 27
++#define	MSM_BUS_MASTER_GRAPHICS_2D_CORE0 28
++#define	MSM_BUS_MASTER_VFE 29
++#define	MSM_BUS_MASTER_VPE 30
++#define	MSM_BUS_MASTER_JPEG_ENC 31
++#define	MSM_BUS_MASTER_GRAPHICS_2D_CORE1 32
++#define	MSM_BUS_MMSS_MASTER_APPS_FAB 33
++#define	MSM_BUS_MASTER_HD_CODEC_PORT0 34
++#define	MSM_BUS_MASTER_HD_CODEC_PORT1 35
++#define	MSM_BUS_MASTER_SPDM 36
++#define	MSM_BUS_MASTER_RPM 37
++#define	MSM_BUS_MASTER_MSS 38
++#define	MSM_BUS_MASTER_RIVA 39
++#define	MSM_BUS_MASTER_SNOC_VMEM 40
++#define	MSM_BUS_MASTER_MSS_SW_PROC 41
++#define	MSM_BUS_MASTER_MSS_FW_PROC 42
++#define	MSM_BUS_MASTER_HMSS 43
++#define	MSM_BUS_MASTER_GSS_NAV 44
++#define	MSM_BUS_MASTER_PCIE 45
++#define	MSM_BUS_MASTER_SATA 46
++#define	MSM_BUS_MASTER_CRYPTO 47
++#define	MSM_BUS_MASTER_VIDEO_CAP 48
++#define	MSM_BUS_MASTER_GRAPHICS_3D_PORT1 49
++#define	MSM_BUS_MASTER_VIDEO_ENC 50
++#define	MSM_BUS_MASTER_VIDEO_DEC 51
++#define	MSM_BUS_MASTER_LPASS_AHB 52
++#define	MSM_BUS_MASTER_QDSS_BAM 53
++#define	MSM_BUS_MASTER_SNOC_CFG 54
++#define	MSM_BUS_MASTER_CRYPTO_CORE0 55
++#define	MSM_BUS_MASTER_CRYPTO_CORE1 56
++#define	MSM_BUS_MASTER_MSS_NAV 57
++#define	MSM_BUS_MASTER_OCMEM_DMA 58
++#define	MSM_BUS_MASTER_WCSS 59
++#define	MSM_BUS_MASTER_QDSS_ETR 60
++#define	MSM_BUS_MASTER_USB3 61
++#define	MSM_BUS_MASTER_JPEG 62
++#define	MSM_BUS_MASTER_VIDEO_P0 63
++#define	MSM_BUS_MASTER_VIDEO_P1 64
++#define	MSM_BUS_MASTER_MSS_PROC 65
++#define	MSM_BUS_MASTER_JPEG_OCMEM 66
++#define	MSM_BUS_MASTER_MDP_OCMEM 67
++#define	MSM_BUS_MASTER_VIDEO_P0_OCMEM 68
++#define	MSM_BUS_MASTER_VIDEO_P1_OCMEM 69
++#define	MSM_BUS_MASTER_VFE_OCMEM 70
++#define	MSM_BUS_MASTER_CNOC_ONOC_CFG 71
++#define	MSM_BUS_MASTER_RPM_INST 72
++#define	MSM_BUS_MASTER_RPM_DATA 73
++#define	MSM_BUS_MASTER_RPM_SYS 74
++#define	MSM_BUS_MASTER_DEHR 75
++#define	MSM_BUS_MASTER_QDSS_DAP 76
++#define	MSM_BUS_MASTER_TIC 77
++#define	MSM_BUS_MASTER_SDCC_1 78
++#define	MSM_BUS_MASTER_SDCC_3 79
++#define	MSM_BUS_MASTER_SDCC_4 80
++#define	MSM_BUS_MASTER_SDCC_2 81
++#define	MSM_BUS_MASTER_TSIF 82
++#define	MSM_BUS_MASTER_BAM_DMA 83
++#define	MSM_BUS_MASTER_BLSP_2 84
++#define	MSM_BUS_MASTER_USB_HSIC 85
++#define	MSM_BUS_MASTER_BLSP_1 86
++#define	MSM_BUS_MASTER_USB_HS 87
++#define	MSM_BUS_MASTER_PNOC_CFG 88
++#define	MSM_BUS_MASTER_V_OCMEM_GFX3D 89
++#define	MSM_BUS_MASTER_IPA 90
++#define	MSM_BUS_MASTER_QPIC 91
++#define	MSM_BUS_MASTER_MDPE 92
++#define	MSM_BUS_MASTER_USB_HS2 93
++#define	MSM_BUS_MASTER_VPU 94
++#define	MSM_BUS_MASTER_UFS 95
++#define	MSM_BUS_MASTER_BCAST 96
++#define	MSM_BUS_MASTER_CRYPTO_CORE2 97
++#define	MSM_BUS_MASTER_EMAC 98
++#define	MSM_BUS_MASTER_VPU_1 99
++#define	MSM_BUS_MASTER_PCIE_1 100
++#define	MSM_BUS_MASTER_USB3_1 101
++#define	MSM_BUS_MASTER_CNOC_MNOC_MMSS_CFG 102
++#define	MSM_BUS_MASTER_CNOC_MNOC_CFG 103
++#define	MSM_BUS_MASTER_TCU_0 104
++#define	MSM_BUS_MASTER_TCU_1 105
++#define	MSM_BUS_MASTER_CPP 106
++#define	MSM_BUS_MASTER_AUDIO 107
++#define	MSM_BUS_MASTER_PCIE_2 108
++#define	MSM_BUS_MASTER_BLSP_BAM 109
++#define	MSM_BUS_MASTER_USB2_BAM 110
++#define	MSM_BUS_MASTER_ADDS_DMA0 111
++#define	MSM_BUS_MASTER_ADDS_DMA1 112
++#define	MSM_BUS_MASTER_ADDS_DMA2 113
++#define	MSM_BUS_MASTER_ADDS_DMA3 114
++#define	MSM_BUS_MASTER_QPIC_BAM 115
++#define	MSM_BUS_MASTER_SDCC_BAM 116
++#define	MSM_BUS_MASTER_DDRC_SNOC 117
++#define	MSM_BUS_MASTER_WSS_0  118
++#define	MSM_BUS_MASTER_WSS_1  119
++#define	MSM_BUS_MASTER_ESS 120
++#define	MSM_BUS_MASTER_QDSS_BAMNDP 121
++#define	MSM_BUS_MASTER_QDSS_SNOC_CFG 122
++#define	MSM_BUS_MASTER_LAST 130
++
++#define	MSM_BUS_SYSTEM_FPB_MASTER_SYSTEM MSM_BUS_SYSTEM_MASTER_SYSTEM_FPB
++#define	MSM_BUS_CPSS_FPB_MASTER_SYSTEM MSM_BUS_SYSTEM_MASTER_CPSS_FPB
++
++#define	MSM_BUS_SNOC_MM_INT_0 10000
++#define	MSM_BUS_SNOC_MM_INT_1 10001
++#define	MSM_BUS_SNOC_MM_INT_2 10002
++#define	MSM_BUS_SNOC_MM_INT_BIMC 10003
++#define	MSM_BUS_SNOC_INT_0 10004
++#define	MSM_BUS_SNOC_INT_1 10005
++#define	MSM_BUS_SNOC_INT_BIMC 10006
++#define	MSM_BUS_SNOC_BIMC_0_MAS 10007
++#define	MSM_BUS_SNOC_BIMC_1_MAS 10008
++#define	MSM_BUS_SNOC_QDSS_INT 10009
++#define	MSM_BUS_PNOC_SNOC_MAS 10010
++#define	MSM_BUS_PNOC_SNOC_SLV 10011
++#define	MSM_BUS_PNOC_INT_0 10012
++#define	MSM_BUS_PNOC_INT_1 10013
++#define	MSM_BUS_PNOC_M_0 10014
++#define	MSM_BUS_PNOC_M_1 10015
++#define	MSM_BUS_BIMC_SNOC_MAS 10016
++#define	MSM_BUS_BIMC_SNOC_SLV 10017
++#define	MSM_BUS_PNOC_SLV_0 10018
++#define	MSM_BUS_PNOC_SLV_1 10019
++#define	MSM_BUS_PNOC_SLV_2 10020
++#define	MSM_BUS_PNOC_SLV_3 10021
++#define	MSM_BUS_PNOC_SLV_4 10022
++#define	MSM_BUS_PNOC_SLV_8 10023
++#define	MSM_BUS_PNOC_SLV_9 10024
++#define	MSM_BUS_SNOC_BIMC_0_SLV 10025
++#define	MSM_BUS_SNOC_BIMC_1_SLV 10026
++#define	MSM_BUS_MNOC_BIMC_MAS 10027
++#define	MSM_BUS_MNOC_BIMC_SLV 10028
++#define	MSM_BUS_BIMC_MNOC_MAS 10029
++#define	MSM_BUS_BIMC_MNOC_SLV 10030
++#define	MSM_BUS_SNOC_BIMC_MAS 10031
++#define	MSM_BUS_SNOC_BIMC_SLV 10032
++#define	MSM_BUS_CNOC_SNOC_MAS 10033
++#define	MSM_BUS_CNOC_SNOC_SLV 10034
++#define	MSM_BUS_SNOC_CNOC_MAS 10035
++#define	MSM_BUS_SNOC_CNOC_SLV 10036
++#define	MSM_BUS_OVNOC_SNOC_MAS 10037
++#define	MSM_BUS_OVNOC_SNOC_SLV 10038
++#define	MSM_BUS_SNOC_OVNOC_MAS 10039
++#define	MSM_BUS_SNOC_OVNOC_SLV 10040
++#define	MSM_BUS_SNOC_PNOC_MAS 10041
++#define	MSM_BUS_SNOC_PNOC_SLV 10042
++#define	MSM_BUS_BIMC_INT_APPS_EBI 10043
++#define	MSM_BUS_BIMC_INT_APPS_SNOC 10044
++#define	MSM_BUS_SNOC_BIMC_2_MAS 10045
++#define	MSM_BUS_SNOC_BIMC_2_SLV 10046
++#define	MSM_BUS_PNOC_SLV_5 10047
++#define	MSM_BUS_PNOC_SLV_6 10048
++#define	MSM_BUS_PNOC_INT_2 10049
++#define	MSM_BUS_PNOC_INT_3 10050
++#define	MSM_BUS_PNOC_INT_4 10051
++#define	MSM_BUS_PNOC_INT_5 10052
++#define	MSM_BUS_PNOC_INT_6 10053
++#define	MSM_BUS_PNOC_INT_7 10054
++#define	MSM_BUS_BIMC_SNOC_1_MAS 10055
++#define	MSM_BUS_BIMC_SNOC_1_SLV 10056
++#define	MSM_BUS_PNOC_A1NOC_MAS 10057
++#define	MSM_BUS_PNOC_A1NOC_SLV 10058
++#define	MSM_BUS_CNOC_A1NOC_MAS 10059
++#define	MSM_BUS_A0NOC_SNOC_MAS 10060
++#define	MSM_BUS_A0NOC_SNOC_SLV 10061
++#define	MSM_BUS_A1NOC_SNOC_SLV 10062
++#define	MSM_BUS_A1NOC_SNOC_MAS 10063
++#define	MSM_BUS_A2NOC_SNOC_MAS 10064
++#define	MSM_BUS_A2NOC_SNOC_SLV 10065
++#define	MSM_BUS_PNOC_SLV_7 10066
++#define	MSM_BUS_INT_LAST 10067
++
++#define	MSM_BUS_SLAVE_FIRST 512
++#define	MSM_BUS_SLAVE_EBI_CH0 512
++#define	MSM_BUS_SLAVE_EBI_CH1 513
++#define	MSM_BUS_SLAVE_AMPSS_L2 514
++#define	MSM_BUS_APPSS_SLAVE_FAB_MMSS 515
++#define	MSM_BUS_APPSS_SLAVE_FAB_SYSTEM 516
++#define	MSM_BUS_SYSTEM_SLAVE_FAB_APPS 517
++#define	MSM_BUS_SLAVE_SPS 518
++#define	MSM_BUS_SLAVE_SYSTEM_IMEM 519
++#define	MSM_BUS_SLAVE_AMPSS 520
++#define	MSM_BUS_SLAVE_MSS 521
++#define	MSM_BUS_SLAVE_LPASS 522
++#define	MSM_BUS_SYSTEM_SLAVE_CPSS_FPB 523
++#define	MSM_BUS_SYSTEM_SLAVE_SYSTEM_FPB 524
++#define	MSM_BUS_SYSTEM_SLAVE_MMSS_FPB 525
++#define	MSM_BUS_SLAVE_CORESIGHT 526
++#define	MSM_BUS_SLAVE_RIVA 527
++#define	MSM_BUS_SLAVE_SMI 528
++#define	MSM_BUS_MMSS_SLAVE_FAB_APPS 529
++#define	MSM_BUS_MMSS_SLAVE_FAB_APPS_1 530
++#define	MSM_BUS_SLAVE_MM_IMEM 531
++#define	MSM_BUS_SLAVE_CRYPTO 532
++#define	MSM_BUS_SLAVE_SPDM 533
++#define	MSM_BUS_SLAVE_RPM 534
++#define	MSM_BUS_SLAVE_RPM_MSG_RAM 535
++#define	MSM_BUS_SLAVE_MPM 536
++#define	MSM_BUS_SLAVE_PMIC1_SSBI1_A 537
++#define	MSM_BUS_SLAVE_PMIC1_SSBI1_B 538
++#define	MSM_BUS_SLAVE_PMIC1_SSBI1_C 539
++#define	MSM_BUS_SLAVE_PMIC2_SSBI2_A 540
++#define	MSM_BUS_SLAVE_PMIC2_SSBI2_B 541
++#define	MSM_BUS_SLAVE_GSBI1_UART 542
++#define	MSM_BUS_SLAVE_GSBI2_UART 543
++#define	MSM_BUS_SLAVE_GSBI3_UART 544
++#define	MSM_BUS_SLAVE_GSBI4_UART 545
++#define	MSM_BUS_SLAVE_GSBI5_UART 546
++#define	MSM_BUS_SLAVE_GSBI6_UART 547
++#define	MSM_BUS_SLAVE_GSBI7_UART 548
++#define	MSM_BUS_SLAVE_GSBI8_UART 549
++#define	MSM_BUS_SLAVE_GSBI9_UART 550
++#define	MSM_BUS_SLAVE_GSBI10_UART 551
++#define	MSM_BUS_SLAVE_GSBI11_UART 552
++#define	MSM_BUS_SLAVE_GSBI12_UART 553
++#define	MSM_BUS_SLAVE_GSBI1_QUP 554
++#define	MSM_BUS_SLAVE_GSBI2_QUP 555
++#define	MSM_BUS_SLAVE_GSBI3_QUP 556
++#define	MSM_BUS_SLAVE_GSBI4_QUP 557
++#define	MSM_BUS_SLAVE_GSBI5_QUP 558
++#define	MSM_BUS_SLAVE_GSBI6_QUP 559
++#define	MSM_BUS_SLAVE_GSBI7_QUP 560
++#define	MSM_BUS_SLAVE_GSBI8_QUP 561
++#define	MSM_BUS_SLAVE_GSBI9_QUP 562
++#define	MSM_BUS_SLAVE_GSBI10_QUP 563
++#define	MSM_BUS_SLAVE_GSBI11_QUP 564
++#define	MSM_BUS_SLAVE_GSBI12_QUP 565
++#define	MSM_BUS_SLAVE_EBI2_NAND 566
++#define	MSM_BUS_SLAVE_EBI2_CS0 567
++#define	MSM_BUS_SLAVE_EBI2_CS1 568
++#define	MSM_BUS_SLAVE_EBI2_CS2 569
++#define	MSM_BUS_SLAVE_EBI2_CS3 570
++#define	MSM_BUS_SLAVE_EBI2_CS4 571
++#define	MSM_BUS_SLAVE_EBI2_CS5 572
++#define	MSM_BUS_SLAVE_USB_FS1 573
++#define	MSM_BUS_SLAVE_USB_FS2 574
++#define	MSM_BUS_SLAVE_TSIF 575
++#define	MSM_BUS_SLAVE_MSM_TSSC 576
++#define	MSM_BUS_SLAVE_MSM_PDM 577
++#define	MSM_BUS_SLAVE_MSM_DIMEM 578
++#define	MSM_BUS_SLAVE_MSM_TCSR 579
++#define	MSM_BUS_SLAVE_MSM_PRNG 580
++#define	MSM_BUS_SLAVE_GSS 581
++#define	MSM_BUS_SLAVE_SATA 582
++#define	MSM_BUS_SLAVE_USB3 583
++#define	MSM_BUS_SLAVE_WCSS 584
++#define	MSM_BUS_SLAVE_OCIMEM 585
++#define	MSM_BUS_SLAVE_SNOC_OCMEM 586
++#define	MSM_BUS_SLAVE_SERVICE_SNOC 587
++#define	MSM_BUS_SLAVE_QDSS_STM 588
++#define	MSM_BUS_SLAVE_CAMERA_CFG 589
++#define	MSM_BUS_SLAVE_DISPLAY_CFG 590
++#define	MSM_BUS_SLAVE_OCMEM_CFG 591
++#define	MSM_BUS_SLAVE_CPR_CFG 592
++#define	MSM_BUS_SLAVE_CPR_XPU_CFG 593
++#define	MSM_BUS_SLAVE_MISC_CFG 594
++#define	MSM_BUS_SLAVE_MISC_XPU_CFG 595
++#define	MSM_BUS_SLAVE_VENUS_CFG 596
++#define	MSM_BUS_SLAVE_MISC_VENUS_CFG 597
++#define	MSM_BUS_SLAVE_GRAPHICS_3D_CFG 598
++#define	MSM_BUS_SLAVE_MMSS_CLK_CFG 599
++#define	MSM_BUS_SLAVE_MMSS_CLK_XPU_CFG 600
++#define	MSM_BUS_SLAVE_MNOC_MPU_CFG 601
++#define	MSM_BUS_SLAVE_ONOC_MPU_CFG 602
++#define	MSM_BUS_SLAVE_SERVICE_MNOC 603
++#define	MSM_BUS_SLAVE_OCMEM 604
++#define	MSM_BUS_SLAVE_SERVICE_ONOC 605
++#define	MSM_BUS_SLAVE_SDCC_1 606
++#define	MSM_BUS_SLAVE_SDCC_3 607
++#define	MSM_BUS_SLAVE_SDCC_2 608
++#define	MSM_BUS_SLAVE_SDCC_4 609
++#define	MSM_BUS_SLAVE_BAM_DMA 610
++#define	MSM_BUS_SLAVE_BLSP_2 611
++#define	MSM_BUS_SLAVE_USB_HSIC 612
++#define	MSM_BUS_SLAVE_BLSP_1 613
++#define	MSM_BUS_SLAVE_USB_HS 614
++#define	MSM_BUS_SLAVE_PDM 615
++#define	MSM_BUS_SLAVE_PERIPH_APU_CFG 616
++#define	MSM_BUS_SLAVE_PNOC_MPU_CFG 617
++#define	MSM_BUS_SLAVE_PRNG 618
++#define	MSM_BUS_SLAVE_SERVICE_PNOC 619
++#define	MSM_BUS_SLAVE_CLK_CTL 620
++#define	MSM_BUS_SLAVE_CNOC_MSS 621
++#define	MSM_BUS_SLAVE_SECURITY 622
++#define	MSM_BUS_SLAVE_TCSR 623
++#define	MSM_BUS_SLAVE_TLMM 624
++#define	MSM_BUS_SLAVE_CRYPTO_0_CFG 625
++#define	MSM_BUS_SLAVE_CRYPTO_1_CFG 626
++#define	MSM_BUS_SLAVE_IMEM_CFG 627
++#define	MSM_BUS_SLAVE_MESSAGE_RAM 628
++#define	MSM_BUS_SLAVE_BIMC_CFG 629
++#define	MSM_BUS_SLAVE_BOOT_ROM 630
++#define	MSM_BUS_SLAVE_CNOC_MNOC_MMSS_CFG 631
++#define	MSM_BUS_SLAVE_PMIC_ARB 632
++#define	MSM_BUS_SLAVE_SPDM_WRAPPER 633
++#define	MSM_BUS_SLAVE_DEHR_CFG 634
++#define	MSM_BUS_SLAVE_QDSS_CFG 635
++#define	MSM_BUS_SLAVE_RBCPR_CFG 636
++#define	MSM_BUS_SLAVE_RBCPR_QDSS_APU_CFG 637
++#define	MSM_BUS_SLAVE_SNOC_MPU_CFG 638
++#define	MSM_BUS_SLAVE_CNOC_ONOC_CFG 639
++#define	MSM_BUS_SLAVE_CNOC_MNOC_CFG 640
++#define	MSM_BUS_SLAVE_PNOC_CFG 641
++#define	MSM_BUS_SLAVE_SNOC_CFG 642
++#define	MSM_BUS_SLAVE_EBI1_DLL_CFG 643
++#define	MSM_BUS_SLAVE_PHY_APU_CFG 644
++#define	MSM_BUS_SLAVE_EBI1_PHY_CFG 645
++#define	MSM_BUS_SLAVE_SERVICE_CNOC 646
++#define	MSM_BUS_SLAVE_IPS_CFG 647
++#define	MSM_BUS_SLAVE_QPIC 648
++#define	MSM_BUS_SLAVE_DSI_CFG 649
++#define	MSM_BUS_SLAVE_UFS_CFG 650
++#define	MSM_BUS_SLAVE_RBCPR_CX_CFG 651
++#define	MSM_BUS_SLAVE_RBCPR_MX_CFG 652
++#define	MSM_BUS_SLAVE_PCIE_CFG 653
++#define	MSM_BUS_SLAVE_USB_PHYS_CFG 654
++#define	MSM_BUS_SLAVE_VIDEO_CAP_CFG 655
++#define	MSM_BUS_SLAVE_AVSYNC_CFG 656
++#define	MSM_BUS_SLAVE_CRYPTO_2_CFG 657
++#define	MSM_BUS_SLAVE_VPU_CFG 658
++#define	MSM_BUS_SLAVE_BCAST_CFG 659
++#define	MSM_BUS_SLAVE_KLM_CFG 660
++#define	MSM_BUS_SLAVE_GENI_IR_CFG 661
++#define	MSM_BUS_SLAVE_OCMEM_GFX 662
++#define	MSM_BUS_SLAVE_CATS_128 663
++#define	MSM_BUS_SLAVE_OCMEM_64 664
++#define MSM_BUS_SLAVE_PCIE_0 665
++#define MSM_BUS_SLAVE_PCIE_1 666
++#define	MSM_BUS_SLAVE_PCIE_0_CFG 667
++#define	MSM_BUS_SLAVE_PCIE_1_CFG 668
++#define	MSM_BUS_SLAVE_SRVC_MNOC 669
++#define	MSM_BUS_SLAVE_USB_HS2 670
++#define	MSM_BUS_SLAVE_AUDIO	671
++#define	MSM_BUS_SLAVE_TCU	672
++#define	MSM_BUS_SLAVE_APPSS	673
++#define	MSM_BUS_SLAVE_PCIE_PARF	674
++#define	MSM_BUS_SLAVE_USB3_PHY_CFG	675
++#define	MSM_BUS_SLAVE_IPA_CFG	676
++#define	MSM_BUS_SLAVE_A0NOC_SNOC 677
++#define	MSM_BUS_SLAVE_A1NOC_SNOC 678
++#define	MSM_BUS_SLAVE_A2NOC_SNOC 679
++#define	MSM_BUS_SLAVE_HMSS_L3 680
++#define	MSM_BUS_SLAVE_PIMEM_CFG 681
++#define	MSM_BUS_SLAVE_DCC_CFG 682
++#define	MSM_BUS_SLAVE_QDSS_RBCPR_APU_CFG 683
++#define	MSM_BUS_SLAVE_PCIE_2_CFG 684
++#define	MSM_BUS_SLAVE_PCIE20_AHB2PHY 685
++#define	MSM_BUS_SLAVE_A0NOC_CFG 686
++#define	MSM_BUS_SLAVE_A1NOC_CFG 687
++#define	MSM_BUS_SLAVE_A2NOC_CFG 688
++#define	MSM_BUS_SLAVE_A1NOC_MPU_CFG 689
++#define	MSM_BUS_SLAVE_A2NOC_MPU_CFG 690
++#define	MSM_BUS_SLAVE_A0NOC_SMMU_CFG 691
++#define	MSM_BUS_SLAVE_A1NOC_SMMU_CFG 692
++#define	MSM_BUS_SLAVE_A2NOC_SMMU_CFG 693
++#define	MSM_BUS_SLAVE_LPASS_SMMU_CFG 694
++#define	MSM_BUS_SLAVE_MMAGIC_CFG 695
++#define	MSM_BUS_SLAVE_VENUS_THROTTLE_CFG 696
++#define	MSM_BUS_SLAVE_SSC_CFG 697
++#define	MSM_BUS_SLAVE_DSA_CFG 698
++#define	MSM_BUS_SLAVE_DSA_MPU_CFG 699
++#define	MSM_BUS_SLAVE_DISPLAY_THROTTLE_CFG 700
++#define	MSM_BUS_SLAVE_SMMU_CPP_CFG 701
++#define	MSM_BUS_SLAVE_SMMU_JPEG_CFG 702
++#define	MSM_BUS_SLAVE_SMMU_MDP_CFG 703
++#define	MSM_BUS_SLAVE_SMMU_ROTATOR_CFG 704
++#define	MSM_BUS_SLAVE_SMMU_VENUS_CFG 705
++#define	MSM_BUS_SLAVE_SMMU_VFE_CFG 706
++#define	MSM_BUS_SLAVE_A0NOC_MPU_CFG 707
++#define	MSM_BUS_SLAVE_VMEM_CFG 708
++#define	MSM_BUS_SLAVE_CAMERA_THROTTLE_CFG 700
++#define	MSM_BUS_SLAVE_VMEM 709
++#define	MSM_BUS_SLAVE_AHB2PHY 710
++#define	MSM_BUS_SLAVE_PIMEM 711
++#define	MSM_BUS_SLAVE_SNOC_VMEM 712
++#define	MSM_BUS_SLAVE_PCIE_2 713
++#define	MSM_BUS_SLAVE_RBCPR_MX 714
++#define	MSM_BUS_SLAVE_RBCPR_CX 715
++#define	MSM_BUS_SLAVE_PRNG_APU_CFG 716
++#define	MSM_BUS_SLAVE_PERIPH_MPU_CFG 717
++#define	MSM_BUS_SLAVE_GCNT 718
++#define	MSM_BUS_SLAVE_ADSS_CFG 719
++#define	MSM_BUS_SLAVE_ADSS_VMIDMT_CFG 720
++#define	MSM_BUS_SLAVE_QHSS_APU_CFG 721
++#define	MSM_BUS_SLAVE_MDIO 722
++#define	MSM_BUS_SLAVE_FEPHY_CFG 723
++#define	MSM_BUS_SLAVE_SRIF 724
++#define	MSM_BUS_SLAVE_LAST 730
++#define	MSM_BUS_SLAVE_DDRC_CFG 731
++#define	MSM_BUS_SLAVE_DDRC_APU_CFG 732
++#define	MSM_BUS_SLAVE_MPU0_CFG 733
++#define	MSM_BUS_SLAVE_MPU1_CFG 734
++#define	MSM_BUS_SLAVE_MPU2_CFG 734
++#define	MSM_BUS_SLAVE_ESS_VMIDMT_CFG 735
++#define	MSM_BUS_SLAVE_ESS_APU_CFG 736
++#define	MSM_BUS_SLAVE_USB2_CFG 737
++#define	MSM_BUS_SLAVE_BLSP_CFG 738
++#define	MSM_BUS_SLAVE_QPIC_CFG 739
++#define	MSM_BUS_SLAVE_SDCC_CFG 740
++#define	MSM_BUS_SLAVE_WSS0_VMIDMT_CFG 741
++#define	MSM_BUS_SLAVE_WSS0_APU_CFG 742
++#define	MSM_BUS_SLAVE_WSS1_VMIDMT_CFG 743
++#define	MSM_BUS_SLAVE_WSS1_APU_CFG 744
++#define	MSM_BUS_SLAVE_SRVC_PCNOC 745
++#define	MSM_BUS_SLAVE_SNOC_DDRC 746
++#define	MSM_BUS_SLAVE_A7SS 747
++#define	MSM_BUS_SLAVE_WSS0_CFG 748
++#define	MSM_BUS_SLAVE_WSS1_CFG 749
++#define	MSM_BUS_SLAVE_PCIE 750
++#define	MSM_BUS_SLAVE_USB3_CFG 751
++#define	MSM_BUS_SLAVE_CRYPTO_CFG 752
++#define	MSM_BUS_SLAVE_ESS_CFG 753
++#define	MSM_BUS_SLAVE_SRVC_SNOC 754
++
++#define	MSM_BUS_SYSTEM_FPB_SLAVE_SYSTEM  MSM_BUS_SYSTEM_SLAVE_SYSTEM_FPB
++#define MSM_BUS_CPSS_FPB_SLAVE_SYSTEM MSM_BUS_SYSTEM_SLAVE_CPSS_FPB
++
++/*
++ * ID's used in RPM messages
++ */
++#define ICBID_MASTER_APPSS_PROC 0
++#define ICBID_MASTER_MSS_PROC 1
++#define ICBID_MASTER_MNOC_BIMC 2
++#define ICBID_MASTER_SNOC_BIMC 3
++#define ICBID_MASTER_SNOC_BIMC_0 ICBID_MASTER_SNOC_BIMC
++#define ICBID_MASTER_CNOC_MNOC_MMSS_CFG 4
++#define ICBID_MASTER_CNOC_MNOC_CFG 5
++#define ICBID_MASTER_GFX3D 6
++#define ICBID_MASTER_JPEG 7
++#define ICBID_MASTER_MDP 8
++#define ICBID_MASTER_MDP0 ICBID_MASTER_MDP
++#define ICBID_MASTER_MDPS ICBID_MASTER_MDP
++#define ICBID_MASTER_VIDEO 9
++#define ICBID_MASTER_VIDEO_P0 ICBID_MASTER_VIDEO
++#define ICBID_MASTER_VIDEO_P1 10
++#define ICBID_MASTER_VFE 11
++#define ICBID_MASTER_CNOC_ONOC_CFG 12
++#define ICBID_MASTER_JPEG_OCMEM 13
++#define ICBID_MASTER_MDP_OCMEM 14
++#define ICBID_MASTER_VIDEO_P0_OCMEM 15
++#define ICBID_MASTER_VIDEO_P1_OCMEM 16
++#define ICBID_MASTER_VFE_OCMEM 17
++#define ICBID_MASTER_LPASS_AHB 18
++#define ICBID_MASTER_QDSS_BAM 19
++#define ICBID_MASTER_SNOC_CFG 20
++#define ICBID_MASTER_BIMC_SNOC 21
++#define ICBID_MASTER_CNOC_SNOC 22
++#define ICBID_MASTER_CRYPTO 23
++#define ICBID_MASTER_CRYPTO_CORE0 ICBID_MASTER_CRYPTO
++#define ICBID_MASTER_CRYPTO_CORE1 24
++#define ICBID_MASTER_LPASS_PROC 25
++#define ICBID_MASTER_MSS 26
++#define ICBID_MASTER_MSS_NAV 27
++#define ICBID_MASTER_OCMEM_DMA 28
++#define ICBID_MASTER_PNOC_SNOC 29
++#define ICBID_MASTER_WCSS 30
++#define ICBID_MASTER_QDSS_ETR 31
++#define ICBID_MASTER_USB3 32
++#define ICBID_MASTER_USB3_0 ICBID_MASTER_USB3
++#define ICBID_MASTER_SDCC_1 33
++#define ICBID_MASTER_SDCC_3 34
++#define ICBID_MASTER_SDCC_2 35
++#define ICBID_MASTER_SDCC_4 36
++#define ICBID_MASTER_TSIF 37
++#define ICBID_MASTER_BAM_DMA 38
++#define ICBID_MASTER_BLSP_2 39
++#define ICBID_MASTER_USB_HSIC 40
++#define ICBID_MASTER_BLSP_1 41
++#define ICBID_MASTER_USB_HS 42
++#define ICBID_MASTER_USB_HS1 ICBID_MASTER_USB_HS
++#define ICBID_MASTER_PNOC_CFG 43
++#define ICBID_MASTER_SNOC_PNOC 44
++#define ICBID_MASTER_RPM_INST 45
++#define ICBID_MASTER_RPM_DATA 46
++#define ICBID_MASTER_RPM_SYS 47
++#define ICBID_MASTER_DEHR 48
++#define ICBID_MASTER_QDSS_DAP 49
++#define ICBID_MASTER_SPDM 50
++#define ICBID_MASTER_TIC 51
++#define ICBID_MASTER_SNOC_CNOC 52
++#define ICBID_MASTER_GFX3D_OCMEM 53
++#define ICBID_MASTER_GFX3D_GMEM ICBID_MASTER_GFX3D_OCMEM
++#define ICBID_MASTER_OVIRT_SNOC 54
++#define ICBID_MASTER_SNOC_OVIRT 55
++#define ICBID_MASTER_SNOC_GVIRT ICBID_MASTER_SNOC_OVIRT
++#define ICBID_MASTER_ONOC_OVIRT 56
++#define ICBID_MASTER_USB_HS2 57
++#define ICBID_MASTER_QPIC 58
++#define ICBID_MASTER_IPA 59
++#define ICBID_MASTER_DSI 60
++#define ICBID_MASTER_MDP1 61
++#define ICBID_MASTER_MDPE ICBID_MASTER_MDP1
++#define ICBID_MASTER_VPU_PROC 62
++#define ICBID_MASTER_VPU 63
++#define ICBID_MASTER_VPU0 ICBID_MASTER_VPU
++#define ICBID_MASTER_CRYPTO_CORE2 64
++#define ICBID_MASTER_PCIE_0 65
++#define ICBID_MASTER_PCIE_1 66
++#define ICBID_MASTER_SATA 67
++#define ICBID_MASTER_UFS 68
++#define ICBID_MASTER_USB3_1 69
++#define ICBID_MASTER_VIDEO_OCMEM 70
++#define ICBID_MASTER_VPU1 71
++#define ICBID_MASTER_VCAP 72
++#define ICBID_MASTER_EMAC 73
++#define ICBID_MASTER_BCAST 74
++#define ICBID_MASTER_MMSS_PROC 75
++#define ICBID_MASTER_SNOC_BIMC_1 76
++#define ICBID_MASTER_SNOC_PCNOC 77
++#define ICBID_MASTER_AUDIO 78
++#define ICBID_MASTER_MM_INT_0 79
++#define ICBID_MASTER_MM_INT_1 80
++#define ICBID_MASTER_MM_INT_2 81
++#define ICBID_MASTER_MM_INT_BIMC 82
++#define ICBID_MASTER_MSS_INT 83
++#define ICBID_MASTER_PCNOC_CFG 84
++#define ICBID_MASTER_PCNOC_INT_0 85
++#define ICBID_MASTER_PCNOC_INT_1 86
++#define ICBID_MASTER_PCNOC_M_0 87
++#define ICBID_MASTER_PCNOC_M_1 88
++#define ICBID_MASTER_PCNOC_S_0 89
++#define ICBID_MASTER_PCNOC_S_1 90
++#define ICBID_MASTER_PCNOC_S_2 91
++#define ICBID_MASTER_PCNOC_S_3 92
++#define ICBID_MASTER_PCNOC_S_4 93
++#define ICBID_MASTER_PCNOC_S_6 94
++#define ICBID_MASTER_PCNOC_S_7 95
++#define ICBID_MASTER_PCNOC_S_8 96
++#define ICBID_MASTER_PCNOC_S_9 97
++#define ICBID_MASTER_QDSS_INT 98
++#define ICBID_MASTER_SNOC_INT_0 99
++#define ICBID_MASTER_SNOC_INT_1 100
++#define ICBID_MASTER_SNOC_INT_BIMC 101
++#define ICBID_MASTER_TCU_0 102
++#define ICBID_MASTER_TCU_1 103
++#define ICBID_MASTER_BIMC_INT_0 104
++#define ICBID_MASTER_BIMC_INT_1 105
++#define ICBID_MASTER_CAMERA 106
++#define ICBID_MASTER_RICA 107
++#define ICBID_MASTER_PCNOC_S_5	129
++#define ICBID_MASTER_PCNOC_INT_2	124
++#define ICBID_MASTER_PCNOC_INT_3	125
++#define ICBID_MASTER_PCNOC_INT_4	126
++#define ICBID_MASTER_PCNOC_INT_5	127
++#define ICBID_MASTER_PCNOC_INT_6	128
++#define ICBID_MASTER_PCIE_2 119
++#define ICBID_MASTER_MASTER_CNOC_A1NOC 116
++#define ICBID_MASTER_A0NOC_SNOC 110
++#define ICBID_MASTER_A1NOC_SNOC 111
++#define ICBID_MASTER_A2NOC_SNOC 112
++#define ICBID_MASTER_PNOC_A1NOC 117
++#define ICBID_MASTER_ROTATOR 120
++#define ICBID_MASTER_SNOC_VMEM 114
++#define ICBID_MASTER_VENUS_VMEM 121
++#define ICBID_MASTER_HMSS 118
++#define ICBID_MASTER_BIMC_SNOC_1 109
++#define ICBID_MASTER_CNOC_A1NOC 116
++#define ICBID_MASTER_CPP 115
++#define ICBID_MASTER_BLSP_BAM 130
++#define ICBID_MASTER_USB2_BAM 131
++#define ICBID_MASTER_ADSS_DMA0 132
++#define ICBID_MASTER_ADSS_DMA1 133
++#define ICBID_MASTER_ADSS_DMA2 134
++#define ICBID_MASTER_ADSS_DMA3 135
++#define ICBID_MASTER_QPIC_BAM 136
++#define ICBID_MASTER_SDCC_BAM 137
++#define ICBID_MASTER_DDRC_SNOC 138
++#define ICBID_MASTER_WSS_0 139
++#define ICBID_MASTER_WSS_1 140
++#define ICBID_MASTER_ESS 141
++#define ICBID_MASTER_PCIE 142
++#define ICBID_MASTER_QDSS_BAMNDP 143
++#define ICBID_MASTER_QDSS_SNOC_CFG 144
++
++#define ICBID_SLAVE_EBI1 0
++#define ICBID_SLAVE_APPSS_L2 1
++#define ICBID_SLAVE_BIMC_SNOC 2
++#define ICBID_SLAVE_CAMERA_CFG 3
++#define ICBID_SLAVE_DISPLAY_CFG 4
++#define ICBID_SLAVE_OCMEM_CFG 5
++#define ICBID_SLAVE_CPR_CFG 6
++#define ICBID_SLAVE_CPR_XPU_CFG 7
++#define ICBID_SLAVE_MISC_CFG 8
++#define ICBID_SLAVE_MISC_XPU_CFG 9
++#define ICBID_SLAVE_VENUS_CFG 10
++#define ICBID_SLAVE_GFX3D_CFG 11
++#define ICBID_SLAVE_MMSS_CLK_CFG 12
++#define ICBID_SLAVE_MMSS_CLK_XPU_CFG 13
++#define ICBID_SLAVE_MNOC_MPU_CFG 14
++#define ICBID_SLAVE_ONOC_MPU_CFG 15
++#define ICBID_SLAVE_MNOC_BIMC 16
++#define ICBID_SLAVE_SERVICE_MNOC 17
++#define ICBID_SLAVE_OCMEM 18
++#define ICBID_SLAVE_GMEM ICBID_SLAVE_OCMEM
++#define ICBID_SLAVE_SERVICE_ONOC 19
++#define ICBID_SLAVE_APPSS 20
++#define ICBID_SLAVE_LPASS 21
++#define ICBID_SLAVE_USB3 22
++#define ICBID_SLAVE_USB3_0 ICBID_SLAVE_USB3
++#define ICBID_SLAVE_WCSS 23
++#define ICBID_SLAVE_SNOC_BIMC 24
++#define ICBID_SLAVE_SNOC_BIMC_0 ICBID_SLAVE_SNOC_BIMC
++#define ICBID_SLAVE_SNOC_CNOC 25
++#define ICBID_SLAVE_IMEM 26
++#define ICBID_SLAVE_OCIMEM ICBID_SLAVE_IMEM
++#define ICBID_SLAVE_SNOC_OVIRT 27
++#define ICBID_SLAVE_SNOC_GVIRT ICBID_SLAVE_SNOC_OVIRT
++#define ICBID_SLAVE_SNOC_PNOC 28
++#define ICBID_SLAVE_SNOC_PCNOC ICBID_SLAVE_SNOC_PNOC
++#define ICBID_SLAVE_SERVICE_SNOC 29
++#define ICBID_SLAVE_QDSS_STM 30
++#define ICBID_SLAVE_SDCC_1 31
++#define ICBID_SLAVE_SDCC_3 32
++#define ICBID_SLAVE_SDCC_2 33
++#define ICBID_SLAVE_SDCC_4 34
++#define ICBID_SLAVE_TSIF 35
++#define ICBID_SLAVE_BAM_DMA 36
++#define ICBID_SLAVE_BLSP_2 37
++#define ICBID_SLAVE_USB_HSIC 38
++#define ICBID_SLAVE_BLSP_1 39
++#define ICBID_SLAVE_USB_HS 40
++#define ICBID_SLAVE_USB_HS1 ICBID_SLAVE_USB_HS
++#define ICBID_SLAVE_PDM 41
++#define ICBID_SLAVE_PERIPH_APU_CFG 42
++#define ICBID_SLAVE_PNOC_MPU_CFG 43
++#define ICBID_SLAVE_PRNG 44
++#define ICBID_SLAVE_PNOC_SNOC 45
++#define ICBID_SLAVE_PCNOC_SNOC ICBID_SLAVE_PNOC_SNOC
++#define ICBID_SLAVE_SERVICE_PNOC 46
++#define ICBID_SLAVE_CLK_CTL 47
++#define ICBID_SLAVE_CNOC_MSS 48
++#define ICBID_SLAVE_PCNOC_MSS ICBID_SLAVE_CNOC_MSS
++#define ICBID_SLAVE_SECURITY 49
++#define ICBID_SLAVE_TCSR 50
++#define ICBID_SLAVE_TLMM 51
++#define ICBID_SLAVE_CRYPTO_0_CFG 52
++#define ICBID_SLAVE_CRYPTO_1_CFG 53
++#define ICBID_SLAVE_IMEM_CFG 54
++#define ICBID_SLAVE_MESSAGE_RAM 55
++#define ICBID_SLAVE_BIMC_CFG 56
++#define ICBID_SLAVE_BOOT_ROM 57
++#define ICBID_SLAVE_CNOC_MNOC_MMSS_CFG 58
++#define ICBID_SLAVE_PMIC_ARB 59
++#define ICBID_SLAVE_SPDM_WRAPPER 60
++#define ICBID_SLAVE_DEHR_CFG 61
++#define ICBID_SLAVE_MPM 62
++#define ICBID_SLAVE_QDSS_CFG 63
++#define ICBID_SLAVE_RBCPR_CFG 64
++#define ICBID_SLAVE_RBCPR_CX_CFG ICBID_SLAVE_RBCPR_CFG
++#define ICBID_SLAVE_RBCPR_QDSS_APU_CFG 65
++#define ICBID_SLAVE_CNOC_MNOC_CFG 66
++#define ICBID_SLAVE_SNOC_MPU_CFG 67
++#define ICBID_SLAVE_CNOC_ONOC_CFG 68
++#define ICBID_SLAVE_PNOC_CFG 69
++#define ICBID_SLAVE_SNOC_CFG 70
++#define ICBID_SLAVE_EBI1_DLL_CFG 71
++#define ICBID_SLAVE_PHY_APU_CFG 72
++#define ICBID_SLAVE_EBI1_PHY_CFG 73
++#define ICBID_SLAVE_RPM 74
++#define ICBID_SLAVE_CNOC_SNOC 75
++#define ICBID_SLAVE_SERVICE_CNOC 76
++#define ICBID_SLAVE_OVIRT_SNOC 77
++#define ICBID_SLAVE_OVIRT_OCMEM 78
++#define ICBID_SLAVE_USB_HS2 79
++#define ICBID_SLAVE_QPIC 80
++#define ICBID_SLAVE_IPS_CFG 81
++#define ICBID_SLAVE_DSI_CFG 82
++#define ICBID_SLAVE_USB3_1 83
++#define ICBID_SLAVE_PCIE_0 84
++#define ICBID_SLAVE_PCIE_1 85
++#define ICBID_SLAVE_PSS_SMMU_CFG 86
++#define ICBID_SLAVE_CRYPTO_2_CFG 87
++#define ICBID_SLAVE_PCIE_0_CFG 88
++#define ICBID_SLAVE_PCIE_1_CFG 89
++#define ICBID_SLAVE_SATA_CFG 90
++#define ICBID_SLAVE_SPSS_GENI_IR 91
++#define ICBID_SLAVE_UFS_CFG 92
++#define ICBID_SLAVE_AVSYNC_CFG 93
++#define ICBID_SLAVE_VPU_CFG 94
++#define ICBID_SLAVE_USB_PHY_CFG 95
++#define ICBID_SLAVE_RBCPR_MX_CFG 96
++#define ICBID_SLAVE_PCIE_PARF 97
++#define ICBID_SLAVE_VCAP_CFG 98
++#define ICBID_SLAVE_EMAC_CFG 99
++#define ICBID_SLAVE_BCAST_CFG 100
++#define ICBID_SLAVE_KLM_CFG 101
++#define ICBID_SLAVE_DISPLAY_PWM 102
++#define ICBID_SLAVE_GENI 103
++#define ICBID_SLAVE_SNOC_BIMC_1 104
++#define ICBID_SLAVE_AUDIO 105
++#define ICBID_SLAVE_CATS_0 106
++#define ICBID_SLAVE_CATS_1 107
++#define ICBID_SLAVE_MM_INT_0 108
++#define ICBID_SLAVE_MM_INT_1 109
++#define ICBID_SLAVE_MM_INT_2 110
++#define ICBID_SLAVE_MM_INT_BIMC 111
++#define ICBID_SLAVE_MMU_MODEM_XPU_CFG 112
++#define ICBID_SLAVE_MSS_INT 113
++#define ICBID_SLAVE_PCNOC_INT_0 114
++#define ICBID_SLAVE_PCNOC_INT_1 115
++#define ICBID_SLAVE_PCNOC_M_0 116
++#define ICBID_SLAVE_PCNOC_M_1 117
++#define ICBID_SLAVE_PCNOC_S_0 118
++#define ICBID_SLAVE_PCNOC_S_1 119
++#define ICBID_SLAVE_PCNOC_S_2 120
++#define ICBID_SLAVE_PCNOC_S_3 121
++#define ICBID_SLAVE_PCNOC_S_4 122
++#define ICBID_SLAVE_PCNOC_S_6 123
++#define ICBID_SLAVE_PCNOC_S_7 124
++#define ICBID_SLAVE_PCNOC_S_8 125
++#define ICBID_SLAVE_PCNOC_S_9 126
++#define ICBID_SLAVE_PRNG_XPU_CFG 127
++#define ICBID_SLAVE_QDSS_INT 128
++#define ICBID_SLAVE_RPM_XPU_CFG 129
++#define ICBID_SLAVE_SNOC_INT_0 130
++#define ICBID_SLAVE_SNOC_INT_1 131
++#define ICBID_SLAVE_SNOC_INT_BIMC 132
++#define ICBID_SLAVE_TCU 133
++#define ICBID_SLAVE_BIMC_INT_0 134
++#define ICBID_SLAVE_BIMC_INT_1 135
++#define ICBID_SLAVE_RICA_CFG 136
++#define ICBID_SLAVE_PCNOC_S_5	189
++#define ICBID_SLAVE_PCNOC_S_7 124
++#define ICBID_SLAVE_PCNOC_INT_2 184
++#define ICBID_SLAVE_PCNOC_INT_3 185
++#define ICBID_SLAVE_PCNOC_INT_4 186
++#define ICBID_SLAVE_PCNOC_INT_5 187
++#define ICBID_SLAVE_PCNOC_INT_6 188
++#define ICBID_SLAVE_USB3_PHY_CFG 182
++#define ICBID_SLAVE_IPA_CFG 183
++
++#define ICBID_SLAVE_A0NOC_SNOC 141
++#define ICBID_SLAVE_A1NOC_SNOC 142
++#define ICBID_SLAVE_A2NOC_SNOC 143
++#define ICBID_SLAVE_BIMC_SNOC_1 138
++#define ICBID_SLAVE_PIMEM 167
++#define ICBID_SLAVE_PIMEM_CFG 168
++#define ICBID_SLAVE_DCC_CFG 155
++#define ICBID_SLAVE_QDSS_RBCPR_APU_CFG 168
++#define ICBID_SLAVE_A0NOC_CFG 144
++#define ICBID_SLAVE_PCIE_2_CFG 165
++#define ICBID_SLAVE_PCIE20_AHB2PHY 163
++#define ICBID_SLAVE_PCIE_2 164
++#define ICBID_SLAVE_A1NOC_CFG 147
++#define ICBID_SLAVE_A1NOC_MPU_CFG 148
++#define ICBID_SLAVE_A1NOC_SMMU_CFG 149
++#define ICBID_SLAVE_A2NOC_CFG 150
++#define ICBID_SLAVE_A2NOC_MPU_CFG 151
++#define ICBID_SLAVE_A2NOC_SMMU_CFG 152
++#define ICBID_SLAVE_AHB2PHY 153
++#define ICBID_SLAVE_HMSS_L3 161
++#define ICBID_SLAVE_LPASS_SMMU_CFG 161
++#define ICBID_SLAVE_MMAGIC_CFG 162
++#define ICBID_SLAVE_SSC_CFG 177
++#define ICBID_SLAVE_VENUS_THROTTLE_CFG 178
++#define ICBID_SLAVE_DISPLAY_THROTTLE_CFG 156
++#define ICBID_SLAVE_CAMERA_THROTTLE_CFG 154
++#define ICBID_SLAVE_DSA_CFG 157
++#define ICBID_SLAVE_DSA_MPU_CFG 158
++#define ICBID_SLAVE_SMMU_CPP_CFG 171
++#define ICBID_SLAVE_SMMU_JPEG_CFG 172
++#define ICBID_SLAVE_SMMU_MDP_CFG 173
++#define ICBID_SLAVE_SMMU_ROTATOR_CFG 174
++#define ICBID_SLAVE_SMMU_VENUS_CFG 175
++#define ICBID_SLAVE_SMMU_VFE_CFG 176
++#define ICBID_SLAVE_A0NOC_MPU_CFG 145
++#define ICBID_SLAVE_A0NOC_SMMU_CFG 146
++#define ICBID_SLAVE_VMEM_CFG 180
++#define ICBID_SLAVE_VMEM 179
++#define ICBID_SLAVE_PNOC_A1NOC 139
++#define ICBID_SLAVE_SNOC_VMEM 140
++#define ICBID_SLAVE_RBCPR_MX 170
++#define ICBID_SLAVE_RBCPR_CX 169
++#define ICBID_SLAVE_PRNG_APU_CFG 190
++#define ICBID_SLAVE_PERIPH_MPU_CFG 191
++#define ICBID_SLAVE_GCNT 192
++#define ICBID_SLAVE_ADSS_CFG 193
++#define ICBID_SLAVE_ADSS_APU 194
++#define ICBID_SLAVE_ADSS_VMIDMT_CFG 195
++#define ICBID_SLAVE_QHSS_APU_CFG 196
++#define ICBID_SLAVE_MDIO 197
++#define ICBID_SLAVE_FEPHY_CFG 198
++#define ICBID_SLAVE_SRIF 199
++#define ICBID_SLAVE_DDRC_CFG 200
++#define ICBID_SLAVE_DDRC_APU_CFG 201
++#define ICBID_SLAVE_DDRC_MPU0_CFG 202
++#define ICBID_SLAVE_DDRC_MPU1_CFG 203
++#define ICBID_SLAVE_DDRC_MPU2_CFG 210
++#define ICBID_SLAVE_ESS_VMIDMT_CFG 211
++#define ICBID_SLAVE_ESS_APU_CFG 212
++#define ICBID_SLAVE_USB2_CFG 213
++#define ICBID_SLAVE_BLSP_CFG 214
++#define ICBID_SLAVE_QPIC_CFG 215
++#define ICBID_SLAVE_SDCC_CFG 216
++#define ICBID_SLAVE_WSS0_VMIDMT_CFG 217
++#define ICBID_SLAVE_WSS0_APU_CFG 218
++#define ICBID_SLAVE_WSS1_VMIDMT_CFG 219
++#define ICBID_SLAVE_WSS1_APU_CFG 220
++#define ICBID_SLAVE_SRVC_PCNOC 221
++#define ICBID_SLAVE_SNOC_DDRC 222
++#define ICBID_SLAVE_A7SS 223
++#define ICBID_SLAVE_WSS0_CFG 224
++#define ICBID_SLAVE_WSS1_CFG 225
++#define ICBID_SLAVE_PCIE 226
++#define ICBID_SLAVE_USB3_CFG 227
++#define ICBID_SLAVE_CRYPTO_CFG 228
++#define ICBID_SLAVE_ESS_CFG 229
++#define ICBID_SLAVE_SRVC_SNOC 230
++#endif
+--- /dev/null
++++ b/include/dt-bindings/msm/msm-bus-rule-ops.h
+@@ -0,0 +1,32 @@
++/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++
++#ifndef __MSM_BUS_RULE_OPS_H
++#define __MSM_BUS_RULE_OPS_H
++
++#define FLD_IB	0
++#define FLD_AB	1
++#define FLD_CLK	2
++
++#define OP_LE	0
++#define OP_LT	1
++#define OP_GE	2
++#define OP_GT	3
++#define OP_NOOP	4
++
++#define RULE_STATE_NOT_APPLIED	0
++#define RULE_STATE_APPLIED	1
++
++#define THROTTLE_ON	0
++#define THROTTLE_OFF	1
++
++#endif
+--- /dev/null
++++ b/drivers/bus/msm_bus/Kconfig
+@@ -0,0 +1,19 @@
++config BUS_TOPOLOGY_ADHOC
++	bool "ad-hoc bus scaling topology"
++	depends on ARCH_QCOM
++	default n
++	help
++	  This option enables a driver that can handle adhoc bus topologies.
++	  Adhoc bus topology driver allows one to many connections and maintains
++	  directionality of connections by explicitly listing device connections
++	  thus avoiding illegal routes.
++
++config MSM_BUS_SCALING
++	bool "Bus scaling driver"
++	depends on BUS_TOPOLOGY_ADHOC
++	default n
++	help
++	  This option enables bus scaling on MSM devices.  Bus scaling
++	  allows devices to request the clocks be set to rates sufficient
++	  for the active devices needs without keeping the clocks at max
++	  frequency when a slower speed is sufficient.
+--- /dev/null
++++ b/drivers/bus/msm_bus/Makefile
+@@ -0,0 +1,12 @@
++#
++# Makefile for msm-bus driver specific files
++#
++obj-y += msm_bus_bimc.o msm_bus_noc.o msm_bus_core.o msm_bus_client_api.o \
++	 msm_bus_id.o
++obj-$(CONFIG_OF) += msm_bus_of.o
++
++obj-y += msm_bus_fabric_adhoc.o msm_bus_arb_adhoc.o msm_bus_rules.o
++obj-$(CONFIG_OF) += msm_bus_of_adhoc.o
++obj-$(CONFIG_CORESIGHT) +=  msm_buspm_coresight_adhoc.o
++
++obj-$(CONFIG_DEBUG_FS) += msm_bus_dbg.o
+--- /dev/null
++++ b/drivers/bus/msm_bus/msm-bus-board.h
+@@ -0,0 +1,198 @@
++/* Copyright (c) 2010-2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++
++#ifndef __ASM_ARCH_MSM_BUS_BOARD_H
++#define __ASM_ARCH_MSM_BUS_BOARD_H
++
++#include <linux/types.h>
++#include <linux/input.h>
++
++enum context {
++	DUAL_CTX,
++	ACTIVE_CTX,
++	NUM_CTX
++};
++
++struct msm_bus_fabric_registration {
++	unsigned int id;
++	const char *name;
++	struct msm_bus_node_info *info;
++	unsigned int len;
++	int ahb;
++	const char *fabclk[NUM_CTX];
++	const char *iface_clk;
++	unsigned int offset;
++	unsigned int haltid;
++	unsigned int rpm_enabled;
++	unsigned int nmasters;
++	unsigned int nslaves;
++	unsigned int ntieredslaves;
++	bool il_flag;
++	const struct msm_bus_board_algorithm *board_algo;
++	int hw_sel;
++	void *hw_data;
++	uint32_t qos_freq;
++	uint32_t qos_baseoffset;
++	u64 nr_lim_thresh;
++	uint32_t eff_fact;
++	uint32_t qos_delta;
++	bool virt;
++};
++
++struct msm_bus_device_node_registration {
++	struct msm_bus_node_device_type *info;
++	unsigned int num_devices;
++	bool virt;
++};
++
++enum msm_bus_bw_tier_type {
++	MSM_BUS_BW_TIER1 = 1,
++	MSM_BUS_BW_TIER2,
++	MSM_BUS_BW_COUNT,
++	MSM_BUS_BW_SIZE = 0x7FFFFFFF,
++};
++
++struct msm_bus_halt_vector {
++	uint32_t haltval;
++	uint32_t haltmask;
++};
++
++extern struct msm_bus_fabric_registration msm_bus_apps_fabric_pdata;
++extern struct msm_bus_fabric_registration msm_bus_sys_fabric_pdata;
++extern struct msm_bus_fabric_registration msm_bus_mm_fabric_pdata;
++extern struct msm_bus_fabric_registration msm_bus_sys_fpb_pdata;
++extern struct msm_bus_fabric_registration msm_bus_cpss_fpb_pdata;
++extern struct msm_bus_fabric_registration msm_bus_def_fab_pdata;
++
++extern struct msm_bus_fabric_registration msm_bus_8960_apps_fabric_pdata;
++extern struct msm_bus_fabric_registration msm_bus_8960_sys_fabric_pdata;
++extern struct msm_bus_fabric_registration msm_bus_8960_mm_fabric_pdata;
++extern struct msm_bus_fabric_registration msm_bus_8960_sg_mm_fabric_pdata;
++extern struct msm_bus_fabric_registration msm_bus_8960_sys_fpb_pdata;
++extern struct msm_bus_fabric_registration msm_bus_8960_cpss_fpb_pdata;
++
++extern struct msm_bus_fabric_registration msm_bus_8064_apps_fabric_pdata;
++extern struct msm_bus_fabric_registration msm_bus_8064_sys_fabric_pdata;
++extern struct msm_bus_fabric_registration msm_bus_8064_mm_fabric_pdata;
++extern struct msm_bus_fabric_registration msm_bus_8064_sys_fpb_pdata;
++extern struct msm_bus_fabric_registration msm_bus_8064_cpss_fpb_pdata;
++
++extern struct msm_bus_fabric_registration msm_bus_9615_sys_fabric_pdata;
++extern struct msm_bus_fabric_registration msm_bus_9615_def_fab_pdata;
++
++extern struct msm_bus_fabric_registration msm_bus_8930_apps_fabric_pdata;
++extern struct msm_bus_fabric_registration msm_bus_8930_sys_fabric_pdata;
++extern struct msm_bus_fabric_registration msm_bus_8930_mm_fabric_pdata;
++extern struct msm_bus_fabric_registration msm_bus_8930_sys_fpb_pdata;
++extern struct msm_bus_fabric_registration msm_bus_8930_cpss_fpb_pdata;
++
++extern struct msm_bus_fabric_registration msm_bus_8974_sys_noc_pdata;
++extern struct msm_bus_fabric_registration msm_bus_8974_mmss_noc_pdata;
++extern struct msm_bus_fabric_registration msm_bus_8974_bimc_pdata;
++extern struct msm_bus_fabric_registration msm_bus_8974_ocmem_noc_pdata;
++extern struct msm_bus_fabric_registration msm_bus_8974_periph_noc_pdata;
++extern struct msm_bus_fabric_registration msm_bus_8974_config_noc_pdata;
++extern struct msm_bus_fabric_registration msm_bus_8974_ocmem_vnoc_pdata;
++
++extern struct msm_bus_fabric_registration msm_bus_9625_sys_noc_pdata;
++extern struct msm_bus_fabric_registration msm_bus_9625_bimc_pdata;
++extern struct msm_bus_fabric_registration msm_bus_9625_periph_noc_pdata;
++extern struct msm_bus_fabric_registration msm_bus_9625_config_noc_pdata;
++
++extern int msm_bus_device_match_adhoc(struct device *dev, void *id);
++
++void msm_bus_rpm_set_mt_mask(void);
++int msm_bus_board_rpm_get_il_ids(uint16_t *id);
++int msm_bus_board_get_iid(int id);
++
++#define NFAB_MSM8226 6
++#define NFAB_MSM8610 5
++
++/*
++ * These macros specify the convention followed for allocating
++ * ids to fabrics, masters and slaves for 8x60.
++ *
++ * A node can be identified as a master/slave/fabric by using
++ * these ids.
++ */
++#define FABRIC_ID_KEY 1024
++#define SLAVE_ID_KEY ((FABRIC_ID_KEY) >> 1)
++#define MAX_FAB_KEY 7168  /* OR(All fabric ids) */
++#define INT_NODE_START 10000
++
++#define GET_FABID(id) ((id) & MAX_FAB_KEY)
++
++#define NODE_ID(id) ((id) & (FABRIC_ID_KEY - 1))
++#define IS_SLAVE(id) ((NODE_ID(id)) >= SLAVE_ID_KEY ? 1 : 0)
++#define CHECK_ID(iid, id) (((iid & id) != id) ? -ENXIO : iid)
++
++/*
++ * The following macros are used to format the data for port halt
++ * and unhalt requests.
++ */
++#define MSM_BUS_CLK_HALT 0x1
++#define MSM_BUS_CLK_HALT_MASK 0x1
++#define MSM_BUS_CLK_HALT_FIELDSIZE 0x1
++#define MSM_BUS_CLK_UNHALT 0x0
++
++#define MSM_BUS_MASTER_SHIFT(master, fieldsize) \
++	((master) * (fieldsize))
++
++#define MSM_BUS_SET_BITFIELD(word, fieldmask, fieldvalue) \
++	{	\
++		(word) &= ~(fieldmask);	\
++		(word) |= (fieldvalue);	\
++	}
++
++
++#define MSM_BUS_MASTER_HALT(u32haltmask, u32haltval, master) \
++	MSM_BUS_SET_BITFIELD(u32haltmask, \
++		MSM_BUS_CLK_HALT_MASK<<MSM_BUS_MASTER_SHIFT((master),\
++		MSM_BUS_CLK_HALT_FIELDSIZE), \
++		MSM_BUS_CLK_HALT_MASK<<MSM_BUS_MASTER_SHIFT((master),\
++		MSM_BUS_CLK_HALT_FIELDSIZE))\
++	MSM_BUS_SET_BITFIELD(u32haltval, \
++		MSM_BUS_CLK_HALT_MASK<<MSM_BUS_MASTER_SHIFT((master),\
++		MSM_BUS_CLK_HALT_FIELDSIZE), \
++		MSM_BUS_CLK_HALT<<MSM_BUS_MASTER_SHIFT((master),\
++		MSM_BUS_CLK_HALT_FIELDSIZE))\
++
++#define MSM_BUS_MASTER_UNHALT(u32haltmask, u32haltval, master) \
++	MSM_BUS_SET_BITFIELD(u32haltmask, \
++		MSM_BUS_CLK_HALT_MASK<<MSM_BUS_MASTER_SHIFT((master),\
++		MSM_BUS_CLK_HALT_FIELDSIZE), \
++		MSM_BUS_CLK_HALT_MASK<<MSM_BUS_MASTER_SHIFT((master),\
++		MSM_BUS_CLK_HALT_FIELDSIZE))\
++	MSM_BUS_SET_BITFIELD(u32haltval, \
++		MSM_BUS_CLK_HALT_MASK<<MSM_BUS_MASTER_SHIFT((master),\
++		MSM_BUS_CLK_HALT_FIELDSIZE), \
++		MSM_BUS_CLK_UNHALT<<MSM_BUS_MASTER_SHIFT((master),\
++		MSM_BUS_CLK_HALT_FIELDSIZE))\
++
++#define RPM_BUS_SLAVE_REQ	0x766c7362
++#define RPM_BUS_MASTER_REQ	0x73616d62
++
++enum msm_bus_rpm_slave_field_type {
++	RPM_SLAVE_FIELD_BW = 0x00007762,
++};
++
++enum msm_bus_rpm_mas_field_type {
++	RPM_MASTER_FIELD_BW =		0x00007762,
++	RPM_MASTER_FIELD_BW_T0 =	0x30747762,
++	RPM_MASTER_FIELD_BW_T1 =	0x31747762,
++	RPM_MASTER_FIELD_BW_T2 =	0x32747762,
++};
++
++#include <dt-bindings/msm/msm-bus-ids.h>
++
++
++#endif /*__ASM_ARCH_MSM_BUS_BOARD_H */
+--- /dev/null
++++ b/drivers/bus/msm_bus/msm-bus.h
+@@ -0,0 +1,139 @@
++/* Copyright (c) 2010-2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++
++#ifndef _ARCH_ARM_MACH_MSM_BUS_H
++#define _ARCH_ARM_MACH_MSM_BUS_H
++
++#include <linux/types.h>
++#include <linux/input.h>
++#include <linux/platform_device.h>
++
++/*
++ * Macros for clients to convert their data to ib and ab
++ * Ws : Time window over which to transfer the data in SECONDS
++ * Bs : Size of the data block in bytes
++ * Per : Recurrence period
++ * Tb : Throughput bandwidth to prevent stalling
++ * R  : Ratio of actual bandwidth used to Tb
++ * Ib : Instantaneous bandwidth
++ * Ab : Arbitrated bandwidth
++ *
++ * IB_RECURRBLOCK and AB_RECURRBLOCK:
++ * These are used if the requirement is to transfer a
++ * recurring block of data over a known time window.
++ *
++ * IB_THROUGHPUTBW and AB_THROUGHPUTBW:
++ * These are used for CPU style masters. Here the requirement
++ * is to have minimum throughput bandwidth available to avoid
++ * stalling.
++ */
++#define IB_RECURRBLOCK(Ws, Bs) ((Ws) == 0 ? 0 : ((Bs)/(Ws)))
++#define AB_RECURRBLOCK(Ws, Per) ((Ws) == 0 ? 0 : ((Bs)/(Per)))
++#define IB_THROUGHPUTBW(Tb) (Tb)
++#define AB_THROUGHPUTBW(Tb, R) ((Tb) * (R))
++
++struct msm_bus_vectors {
++	int src; /* Master */
++	int dst; /* Slave */
++	uint64_t ab; /* Arbitrated bandwidth */
++	uint64_t ib; /* Instantaneous bandwidth */
++};
++
++struct msm_bus_paths {
++	int num_paths;
++	struct msm_bus_vectors *vectors;
++};
++
++struct msm_bus_scale_pdata {
++	struct msm_bus_paths *usecase;
++	int num_usecases;
++	const char *name;
++	/*
++	 * If the active_only flag is set to 1, the BW request is applied
++	 * only when at least one CPU is active (powered on). If the flag
++	 * is set to 0, then the BW request is always applied irrespective
++	 * of the CPU state.
++	 */
++	unsigned int active_only;
++};
++
++/* Scaling APIs */
++
++/*
++ * This function returns a handle to the client. This should be used to
++ * call msm_bus_scale_client_update_request.
++ * The function returns 0 if bus driver is unable to register a client
++ */
++
++#if (defined(CONFIG_MSM_BUS_SCALING) || defined(CONFIG_BUS_TOPOLOGY_ADHOC))
++int __init msm_bus_fabric_init_driver(void);
++uint32_t msm_bus_scale_register_client(struct msm_bus_scale_pdata *pdata);
++int msm_bus_scale_client_update_request(uint32_t cl, unsigned int index);
++void msm_bus_scale_unregister_client(uint32_t cl);
++/* AXI Port configuration APIs */
++int msm_bus_axi_porthalt(int master_port);
++int msm_bus_axi_portunhalt(int master_port);
++
++#else
++static inline int __init msm_bus_fabric_init_driver(void) { return 0; }
++
++static inline uint32_t
++msm_bus_scale_register_client(struct msm_bus_scale_pdata *pdata)
++{
++	return 1;
++}
++
++static inline int
++msm_bus_scale_client_update_request(uint32_t cl, unsigned int index)
++{
++	return 0;
++}
++
++static inline void
++msm_bus_scale_unregister_client(uint32_t cl)
++{
++}
++
++static inline int msm_bus_axi_porthalt(int master_port)
++{
++	return 0;
++}
++
++static inline int msm_bus_axi_portunhalt(int master_port)
++{
++	return 0;
++}
++#endif
++
++#if defined(CONFIG_OF) && defined(CONFIG_MSM_BUS_SCALING)
++struct msm_bus_scale_pdata *msm_bus_pdata_from_node(
++		struct platform_device *pdev, struct device_node *of_node);
++struct msm_bus_scale_pdata *msm_bus_cl_get_pdata(struct platform_device *pdev);
++void msm_bus_cl_clear_pdata(struct msm_bus_scale_pdata *pdata);
++#else
++static inline struct msm_bus_scale_pdata
++*msm_bus_cl_get_pdata(struct platform_device *pdev)
++{
++	return NULL;
++}
++
++static inline struct msm_bus_scale_pdata *msm_bus_pdata_from_node(
++		struct platform_device *pdev, struct device_node *of_node)
++{
++	return NULL;
++}
++
++static inline void msm_bus_cl_clear_pdata(struct msm_bus_scale_pdata *pdata)
++{
++}
++#endif
++#endif /*_ARCH_ARM_MACH_MSM_BUS_H*/
+--- /dev/null
++++ b/drivers/bus/msm_bus/msm_bus_adhoc.h
+@@ -0,0 +1,141 @@
++/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++
++#ifndef _ARCH_ARM_MACH_MSM_BUS_ADHOC_H
++#define _ARCH_ARM_MACH_MSM_BUS_ADHOC_H
++
++#include <linux/types.h>
++#include <linux/device.h>
++#include "msm-bus-board.h"
++#include "msm-bus.h"
++#include "msm_bus_rules.h"
++#include "msm_bus_core.h"
++
++struct msm_bus_node_device_type;
++struct link_node {
++	uint64_t lnode_ib[NUM_CTX];
++	uint64_t lnode_ab[NUM_CTX];
++	int next;
++	struct device *next_dev;
++	struct list_head link;
++	uint32_t in_use;
++};
++
++/* New types introduced for adhoc topology */
++struct msm_bus_noc_ops {
++	int (*qos_init)(struct msm_bus_node_device_type *dev,
++			void __iomem *qos_base, uint32_t qos_off,
++			uint32_t qos_delta, uint32_t qos_freq);
++	int (*set_bw)(struct msm_bus_node_device_type *dev,
++			void __iomem *qos_base, uint32_t qos_off,
++			uint32_t qos_delta, uint32_t qos_freq);
++	int (*limit_mport)(struct msm_bus_node_device_type *dev,
++			void __iomem *qos_base, uint32_t qos_off,
++			uint32_t qos_delta, uint32_t qos_freq, bool enable_lim,
++			uint64_t lim_bw);
++	bool (*update_bw_reg)(int mode);
++};
++
++struct nodebw {
++	uint64_t ab[NUM_CTX];
++	bool dirty;
++};
++
++struct msm_bus_fab_device_type {
++	void __iomem *qos_base;
++	phys_addr_t pqos_base;
++	size_t qos_range;
++	uint32_t base_offset;
++	uint32_t qos_freq;
++	uint32_t qos_off;
++	uint32_t util_fact;
++	uint32_t vrail_comp;
++	struct msm_bus_noc_ops noc_ops;
++	enum msm_bus_hw_sel bus_type;
++	bool bypass_qos_prg;
++};
++
++struct qos_params_type {
++	int mode;
++	unsigned int prio_lvl;
++	unsigned int prio_rd;
++	unsigned int prio_wr;
++	unsigned int prio1;
++	unsigned int prio0;
++	unsigned int gp;
++	unsigned int thmp;
++	unsigned int ws;
++	int cur_mode;
++	u64 bw_buffer;
++};
++
++struct msm_bus_node_info_type {
++	const char *name;
++	unsigned int id;
++	int mas_rpm_id;
++	int slv_rpm_id;
++	int num_ports;
++	int num_qports;
++	int *qport;
++	struct qos_params_type qos_params;
++	unsigned int num_connections;
++	unsigned int num_blist;
++	bool is_fab_dev;
++	bool virt_dev;
++	bool is_traversed;
++	unsigned int *connections;
++	unsigned int *black_listed_connections;
++	struct device **dev_connections;
++	struct device **black_connections;
++	unsigned int bus_device_id;
++	struct device *bus_device;
++	unsigned int buswidth;
++	struct rule_update_path_info rule;
++	uint64_t lim_bw;
++	uint32_t util_fact;
++	uint32_t vrail_comp;
++};
++
++struct msm_bus_node_device_type {
++	struct msm_bus_node_info_type *node_info;
++	struct msm_bus_fab_device_type *fabdev;
++	int num_lnodes;
++	struct link_node *lnode_list;
++	uint64_t cur_clk_hz[NUM_CTX];
++	struct nodebw node_ab;
++	struct list_head link;
++	unsigned int ap_owned;
++	struct nodeclk clk[NUM_CTX];
++	struct nodeclk qos_clk;
++};
++
++int msm_bus_enable_limiter(struct msm_bus_node_device_type *nodedev,
++				bool throttle_en, uint64_t lim_bw);
++int msm_bus_update_clks(struct msm_bus_node_device_type *nodedev,
++	int ctx, int **dirty_nodes, int *num_dirty);
++int msm_bus_commit_data(int *dirty_nodes, int ctx, int num_dirty);
++int msm_bus_update_bw(struct msm_bus_node_device_type *nodedev, int ctx,
++	int64_t add_bw, int **dirty_nodes, int *num_dirty);
++void *msm_bus_realloc_devmem(struct device *dev, void *p, size_t old_size,
++					size_t new_size, gfp_t flags);
++
++extern struct msm_bus_device_node_registration
++	*msm_bus_of_to_pdata(struct platform_device *pdev);
++extern void msm_bus_arb_setops_adhoc(struct msm_bus_arb_ops *arb_ops);
++extern int msm_bus_bimc_set_ops(struct msm_bus_node_device_type *bus_dev);
++extern int msm_bus_noc_set_ops(struct msm_bus_node_device_type *bus_dev);
++extern int msm_bus_of_get_static_rules(struct platform_device *pdev,
++					struct bus_rule_type **static_rule);
++extern int msm_rules_update_path(struct list_head *input_list,
++				struct list_head *output_list);
++extern void print_all_rules(void);
++#endif /* _ARCH_ARM_MACH_MSM_BUS_ADHOC_H */
+--- /dev/null
++++ b/drivers/bus/msm_bus/msm_bus_arb_adhoc.c
+@@ -0,0 +1,998 @@
++/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is Mree software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/list.h>
++#include <linux/module.h>
++#include <linux/slab.h>
++#include <linux/mutex.h>
++#include <linux/clk.h>
++#include "msm-bus.h"
++#include "msm_bus_core.h"
++#include "msm_bus_adhoc.h"
++
++#define NUM_CL_HANDLES	50
++#define NUM_LNODES	3
++
++struct bus_search_type {
++	struct list_head link;
++	struct list_head node_list;
++};
++
++struct handle_type {
++	int num_entries;
++	struct msm_bus_client **cl_list;
++};
++
++static struct handle_type handle_list;
++struct list_head input_list;
++struct list_head apply_list;
++
++DEFINE_MUTEX(msm_bus_adhoc_lock);
++
++static bool chk_bl_list(struct list_head *black_list, unsigned int id)
++{
++	struct msm_bus_node_device_type *bus_node = NULL;
++
++	list_for_each_entry(bus_node, black_list, link) {
++		if (bus_node->node_info->id == id)
++			return true;
++	}
++	return false;
++}
++
++static void copy_remaining_nodes(struct list_head *edge_list, struct list_head
++	*traverse_list, struct list_head *route_list)
++{
++	struct bus_search_type *search_node;
++
++	if (list_empty(edge_list) && list_empty(traverse_list))
++		return;
++
++	search_node = kzalloc(sizeof(struct bus_search_type), GFP_KERNEL);
++	INIT_LIST_HEAD(&search_node->node_list);
++	list_splice_init(edge_list, traverse_list);
++	list_splice_init(traverse_list, &search_node->node_list);
++	list_add_tail(&search_node->link, route_list);
++}
++
++/*
++ * Duplicate instantiaion from msm_bus_arb.c. Todo there needs to be a
++ * "util" file for these common func/macros.
++ *
++ * */
++uint64_t msm_bus_div64(unsigned int w, uint64_t bw)
++{
++	uint64_t *b = &bw;
++
++	if ((bw > 0) && (bw < w))
++		return 1;
++
++	switch (w) {
++	case 0:
++		WARN(1, "AXI: Divide by 0 attempted\n");
++	case 1: return bw;
++	case 2: return (bw >> 1);
++	case 4: return (bw >> 2);
++	case 8: return (bw >> 3);
++	case 16: return (bw >> 4);
++	case 32: return (bw >> 5);
++	}
++
++	do_div(*b, w);
++	return *b;
++}
++
++int msm_bus_device_match_adhoc(struct device *dev, void *id)
++{
++	int ret = 0;
++	struct msm_bus_node_device_type *bnode = dev->platform_data;
++
++	if (bnode)
++		ret = (bnode->node_info->id == *(unsigned int *)id);
++	else
++		ret = 0;
++
++	return ret;
++}
++
++static int gen_lnode(struct device *dev,
++			int next_hop, int prev_idx)
++{
++	struct link_node *lnode;
++	struct msm_bus_node_device_type *cur_dev = NULL;
++	int lnode_idx = -1;
++
++	if (!dev)
++		goto exit_gen_lnode;
++
++	cur_dev = dev->platform_data;
++	if (!cur_dev) {
++		MSM_BUS_ERR("%s: Null device ptr", __func__);
++		goto exit_gen_lnode;
++	}
++
++	if (!cur_dev->num_lnodes) {
++		cur_dev->lnode_list = devm_kzalloc(dev,
++				sizeof(struct link_node) * NUM_LNODES,
++								GFP_KERNEL);
++		if (!cur_dev->lnode_list)
++			goto exit_gen_lnode;
++
++		lnode = cur_dev->lnode_list;
++		cur_dev->num_lnodes = NUM_LNODES;
++		lnode_idx = 0;
++	} else {
++		int i;
++		for (i = 0; i < cur_dev->num_lnodes; i++) {
++			if (!cur_dev->lnode_list[i].in_use)
++				break;
++		}
++
++		if (i < cur_dev->num_lnodes) {
++			lnode = &cur_dev->lnode_list[i];
++			lnode_idx = i;
++		} else {
++			struct link_node *realloc_list;
++			size_t cur_size = sizeof(struct link_node) *
++					cur_dev->num_lnodes;
++
++			cur_dev->num_lnodes += NUM_LNODES;
++			realloc_list = msm_bus_realloc_devmem(
++					dev,
++					cur_dev->lnode_list,
++					cur_size,
++					sizeof(struct link_node) *
++					cur_dev->num_lnodes, GFP_KERNEL);
++
++			if (!realloc_list)
++				goto exit_gen_lnode;
++
++			cur_dev->lnode_list = realloc_list;
++			lnode = &cur_dev->lnode_list[i];
++			lnode_idx = i;
++		}
++	}
++
++	lnode->in_use = 1;
++	if (next_hop == cur_dev->node_info->id) {
++		lnode->next = -1;
++		lnode->next_dev = NULL;
++	} else {
++		lnode->next = prev_idx;
++		lnode->next_dev = bus_find_device(&msm_bus_type, NULL,
++					(void *) &next_hop,
++					msm_bus_device_match_adhoc);
++	}
++
++	memset(lnode->lnode_ib, 0, sizeof(uint64_t) * NUM_CTX);
++	memset(lnode->lnode_ab, 0, sizeof(uint64_t) * NUM_CTX);
++
++exit_gen_lnode:
++	return lnode_idx;
++}
++
++static int remove_lnode(struct msm_bus_node_device_type *cur_dev,
++				int lnode_idx)
++{
++	int ret = 0;
++
++	if (!cur_dev) {
++		MSM_BUS_ERR("%s: Null device ptr", __func__);
++		ret = -ENODEV;
++		goto exit_remove_lnode;
++	}
++
++	if (lnode_idx != -1) {
++		if (!cur_dev->num_lnodes ||
++				(lnode_idx > (cur_dev->num_lnodes - 1))) {
++			MSM_BUS_ERR("%s: Invalid Idx %d, num_lnodes %d",
++				__func__, lnode_idx, cur_dev->num_lnodes);
++			ret = -ENODEV;
++			goto exit_remove_lnode;
++		}
++
++		cur_dev->lnode_list[lnode_idx].next = -1;
++		cur_dev->lnode_list[lnode_idx].next_dev = NULL;
++		cur_dev->lnode_list[lnode_idx].in_use = 0;
++	}
++
++exit_remove_lnode:
++	return ret;
++}
++
++static int prune_path(struct list_head *route_list, int dest, int src,
++				struct list_head *black_list, int found)
++{
++	struct bus_search_type *search_node, *temp_search_node;
++	struct msm_bus_node_device_type *bus_node;
++	struct list_head *bl_list;
++	struct list_head *temp_bl_list;
++	int search_dev_id = dest;
++	struct device *dest_dev = bus_find_device(&msm_bus_type, NULL,
++					(void *) &dest,
++					msm_bus_device_match_adhoc);
++	int lnode_hop = -1;
++
++	if (!found)
++		goto reset_links;
++
++	if (!dest_dev) {
++		MSM_BUS_ERR("%s: Can't find dest dev %d", __func__, dest);
++		goto exit_prune_path;
++	}
++
++	lnode_hop = gen_lnode(dest_dev, search_dev_id, lnode_hop);
++
++	list_for_each_entry_reverse(search_node, route_list, link) {
++		list_for_each_entry(bus_node, &search_node->node_list, link) {
++			unsigned int i;
++			for (i = 0; i < bus_node->node_info->num_connections;
++									i++) {
++				if (bus_node->node_info->connections[i] ==
++								search_dev_id) {
++					dest_dev = bus_find_device(
++						&msm_bus_type,
++						NULL,
++						(void *)
++						&bus_node->node_info->
++						id,
++						msm_bus_device_match_adhoc);
++
++					if (!dest_dev) {
++						lnode_hop = -1;
++						goto reset_links;
++					}
++
++					lnode_hop = gen_lnode(dest_dev,
++							search_dev_id,
++							lnode_hop);
++					search_dev_id =
++						bus_node->node_info->id;
++					break;
++				}
++			}
++		}
++	}
++reset_links:
++	list_for_each_entry_safe(search_node, temp_search_node, route_list,
++									link) {
++			list_for_each_entry(bus_node, &search_node->node_list,
++									link)
++				bus_node->node_info->is_traversed = false;
++
++			list_del(&search_node->link);
++			kfree(search_node);
++	}
++
++	list_for_each_safe(bl_list, temp_bl_list, black_list)
++		list_del(bl_list);
++
++exit_prune_path:
++	return lnode_hop;
++}
++
++static void setup_bl_list(struct msm_bus_node_device_type *node,
++				struct list_head *black_list)
++{
++	unsigned int i;
++
++	for (i = 0; i < node->node_info->num_blist; i++) {
++		struct msm_bus_node_device_type *bdev;
++		bdev = node->node_info->black_connections[i]->platform_data;
++		list_add_tail(&bdev->link, black_list);
++	}
++}
++
++static int getpath(int src, int dest)
++{
++	struct list_head traverse_list;
++	struct list_head edge_list;
++	struct list_head route_list;
++	struct list_head black_list;
++	struct device *src_dev = bus_find_device(&msm_bus_type, NULL,
++					(void *) &src,
++					msm_bus_device_match_adhoc);
++	struct msm_bus_node_device_type *src_node;
++	struct bus_search_type *search_node;
++	int found = 0;
++	int depth_index = 0;
++	int first_hop = -1;
++
++	INIT_LIST_HEAD(&traverse_list);
++	INIT_LIST_HEAD(&edge_list);
++	INIT_LIST_HEAD(&route_list);
++	INIT_LIST_HEAD(&black_list);
++
++	if (!src_dev) {
++		MSM_BUS_ERR("%s: Cannot locate src dev %d", __func__, src);
++		goto exit_getpath;
++	}
++
++	src_node = src_dev->platform_data;
++	if (!src_node) {
++		MSM_BUS_ERR("%s:Fatal, Source dev %d not found", __func__, src);
++		goto exit_getpath;
++	}
++	list_add_tail(&src_node->link, &traverse_list);
++
++	while ((!found && !list_empty(&traverse_list))) {
++		struct msm_bus_node_device_type *bus_node = NULL;
++		/* Locate dest_id in the traverse list */
++		list_for_each_entry(bus_node, &traverse_list, link) {
++			if (bus_node->node_info->id == dest) {
++				found = 1;
++				break;
++			}
++		}
++
++		if (!found) {
++			unsigned int i;
++			/* Setup the new edge list */
++			list_for_each_entry(bus_node, &traverse_list, link) {
++				/* Setup list of black-listed nodes */
++				setup_bl_list(bus_node, &black_list);
++
++				for (i = 0; i < bus_node->node_info->
++						num_connections; i++) {
++					bool skip;
++					struct msm_bus_node_device_type
++							*node_conn;
++					node_conn = bus_node->node_info->
++						dev_connections[i]->
++						platform_data;
++					if (node_conn->node_info->
++							is_traversed) {
++						MSM_BUS_ERR("Circ Path %d\n",
++						node_conn->node_info->id);
++						goto reset_traversed;
++					}
++					skip = chk_bl_list(&black_list,
++							bus_node->node_info->
++							connections[i]);
++					if (!skip) {
++						list_add_tail(&node_conn->link,
++							&edge_list);
++						node_conn->node_info->
++							is_traversed = true;
++					}
++				}
++			}
++
++			/* Keep tabs of the previous search list */
++			search_node = kzalloc(sizeof(struct bus_search_type),
++					 GFP_KERNEL);
++			INIT_LIST_HEAD(&search_node->node_list);
++			list_splice_init(&traverse_list,
++					 &search_node->node_list);
++			/* Add the previous search list to a route list */
++			list_add_tail(&search_node->link, &route_list);
++			/* Advancing the list depth */
++			depth_index++;
++			list_splice_init(&edge_list, &traverse_list);
++		}
++	}
++reset_traversed:
++	copy_remaining_nodes(&edge_list, &traverse_list, &route_list);
++	first_hop = prune_path(&route_list, dest, src, &black_list, found);
++
++exit_getpath:
++	return first_hop;
++}
++
++static uint64_t arbitrate_bus_req(struct msm_bus_node_device_type *bus_dev,
++								int ctx)
++{
++	int i;
++	uint64_t max_ib = 0;
++	uint64_t sum_ab = 0;
++	uint64_t bw_max_hz;
++	struct msm_bus_node_device_type *fab_dev = NULL;
++	uint32_t util_fact = 0;
++	uint32_t vrail_comp = 0;
++
++	/* Find max ib */
++	for (i = 0; i < bus_dev->num_lnodes; i++) {
++		max_ib = max(max_ib, bus_dev->lnode_list[i].lnode_ib[ctx]);
++		sum_ab += bus_dev->lnode_list[i].lnode_ab[ctx];
++	}
++	/*
++	 *  Account for Util factor and vrail comp. The new aggregation
++	 *  formula is:
++	 *  Freq_hz = max((sum(ab) * util_fact)/num_chan, max(ib)/vrail_comp)
++	 *				/ bus-width
++	 *  util_fact and vrail comp are obtained from fabric/Node's dts
++	 *  properties.
++	 *  They default to 100 if absent.
++	 */
++	fab_dev = bus_dev->node_info->bus_device->platform_data;
++	/* Don't do this for virtual fabrics */
++	if (fab_dev && fab_dev->fabdev) {
++		util_fact = bus_dev->node_info->util_fact ?
++			bus_dev->node_info->util_fact :
++			fab_dev->fabdev->util_fact;
++		vrail_comp = bus_dev->node_info->vrail_comp ?
++			bus_dev->node_info->vrail_comp :
++			fab_dev->fabdev->vrail_comp;
++		sum_ab *= util_fact;
++		sum_ab = msm_bus_div64(100, sum_ab);
++		max_ib *= 100;
++		max_ib = msm_bus_div64(vrail_comp, max_ib);
++	}
++
++	/* Account for multiple channels if any */
++	if (bus_dev->node_info->num_qports > 1)
++		sum_ab = msm_bus_div64(bus_dev->node_info->num_qports,
++					sum_ab);
++
++	if (!bus_dev->node_info->buswidth) {
++		MSM_BUS_WARN("No bus width found for %d. Using default\n",
++					bus_dev->node_info->id);
++		bus_dev->node_info->buswidth = 8;
++	}
++
++	bw_max_hz = max(max_ib, sum_ab);
++	bw_max_hz = msm_bus_div64(bus_dev->node_info->buswidth,
++					bw_max_hz);
++
++	return bw_max_hz;
++}
++
++static void del_inp_list(struct list_head *list)
++{
++	struct rule_update_path_info *rule_node;
++	struct rule_update_path_info *rule_node_tmp;
++
++	list_for_each_entry_safe(rule_node, rule_node_tmp, list, link)
++		list_del(&rule_node->link);
++}
++
++static void del_op_list(struct list_head *list)
++{
++	struct rule_apply_rcm_info *rule;
++	struct rule_apply_rcm_info *rule_tmp;
++
++	list_for_each_entry_safe(rule, rule_tmp, list, link)
++		list_del(&rule->link);
++}
++
++static int msm_bus_apply_rules(struct list_head *list, bool after_clk_commit)
++{
++	struct rule_apply_rcm_info *rule;
++	struct device *dev = NULL;
++	struct msm_bus_node_device_type *dev_info = NULL;
++	int ret = 0;
++	bool throttle_en = false;
++
++	list_for_each_entry(rule, list, link) {
++		if (!rule)
++			break;
++
++		if (rule && (rule->after_clk_commit != after_clk_commit))
++			continue;
++
++		dev = bus_find_device(&msm_bus_type, NULL,
++				(void *) &rule->id,
++				msm_bus_device_match_adhoc);
++
++		if (!dev) {
++			MSM_BUS_ERR("Can't find dev node for %d", rule->id);
++			continue;
++		}
++		dev_info = dev->platform_data;
++
++		throttle_en = ((rule->throttle == THROTTLE_ON) ? true : false);
++		ret = msm_bus_enable_limiter(dev_info, throttle_en,
++							rule->lim_bw);
++		if (ret)
++			MSM_BUS_ERR("Failed to set limiter for %d", rule->id);
++	}
++
++	return ret;
++}
++
++static uint64_t get_node_aggab(struct msm_bus_node_device_type *bus_dev)
++{
++	int i;
++	int ctx;
++	uint64_t max_agg_ab = 0;
++	uint64_t agg_ab = 0;
++
++	for (ctx = 0; ctx < NUM_CTX; ctx++) {
++		for (i = 0; i < bus_dev->num_lnodes; i++)
++			agg_ab += bus_dev->lnode_list[i].lnode_ab[ctx];
++
++		if (bus_dev->node_info->num_qports > 1)
++			agg_ab = msm_bus_div64(bus_dev->node_info->num_qports,
++							agg_ab);
++
++		max_agg_ab = max(max_agg_ab, agg_ab);
++	}
++
++	return max_agg_ab;
++}
++
++static uint64_t get_node_ib(struct msm_bus_node_device_type *bus_dev)
++{
++	int i;
++	int ctx;
++	uint64_t max_ib = 0;
++
++	for (ctx = 0; ctx < NUM_CTX; ctx++) {
++		for (i = 0; i < bus_dev->num_lnodes; i++)
++			max_ib = max(max_ib,
++				bus_dev->lnode_list[i].lnode_ib[ctx]);
++	}
++	return max_ib;
++}
++
++static int update_path(int src, int dest, uint64_t req_ib, uint64_t req_bw,
++			uint64_t cur_ib, uint64_t cur_bw, int src_idx, int ctx)
++{
++	struct device *src_dev = NULL;
++	struct device *next_dev = NULL;
++	struct link_node *lnode = NULL;
++	struct msm_bus_node_device_type *dev_info = NULL;
++	int curr_idx;
++	int ret = 0;
++	int *dirty_nodes = NULL;
++	int num_dirty = 0;
++	struct rule_update_path_info *rule_node;
++	bool rules_registered = msm_rule_are_rules_registered();
++
++	src_dev = bus_find_device(&msm_bus_type, NULL,
++				(void *) &src,
++				msm_bus_device_match_adhoc);
++
++	if (!src_dev) {
++		MSM_BUS_ERR("%s: Can't find source device %d", __func__, src);
++		ret = -ENODEV;
++		goto exit_update_path;
++	}
++
++	next_dev = src_dev;
++
++	if (src_idx < 0) {
++		MSM_BUS_ERR("%s: Invalid lnode idx %d", __func__, src_idx);
++		ret = -ENXIO;
++		goto exit_update_path;
++	}
++	curr_idx = src_idx;
++
++	INIT_LIST_HEAD(&input_list);
++	INIT_LIST_HEAD(&apply_list);
++
++	while (next_dev) {
++		dev_info = next_dev->platform_data;
++
++		if (curr_idx >= dev_info->num_lnodes) {
++			MSM_BUS_ERR("%s: Invalid lnode Idx %d num lnodes %d",
++			 __func__, curr_idx, dev_info->num_lnodes);
++			ret = -ENXIO;
++			goto exit_update_path;
++		}
++
++		lnode = &dev_info->lnode_list[curr_idx];
++		lnode->lnode_ib[ctx] = req_ib;
++		lnode->lnode_ab[ctx] = req_bw;
++
++		dev_info->cur_clk_hz[ctx] = arbitrate_bus_req(dev_info, ctx);
++
++		/* Start updating the clocks at the first hop.
++		 * Its ok to figure out the aggregated
++		 * request at this node.
++		 */
++		if (src_dev != next_dev) {
++			ret = msm_bus_update_clks(dev_info, ctx, &dirty_nodes,
++								&num_dirty);
++			if (ret) {
++				MSM_BUS_ERR("%s: Failed to update clks dev %d",
++					__func__, dev_info->node_info->id);
++				goto exit_update_path;
++			}
++		}
++
++		ret = msm_bus_update_bw(dev_info, ctx, req_bw, &dirty_nodes,
++								&num_dirty);
++		if (ret) {
++			MSM_BUS_ERR("%s: Failed to update bw dev %d",
++				__func__, dev_info->node_info->id);
++			goto exit_update_path;
++		}
++
++		if (rules_registered) {
++			rule_node = &dev_info->node_info->rule;
++			rule_node->id = dev_info->node_info->id;
++			rule_node->ib = get_node_ib(dev_info);
++			rule_node->ab = get_node_aggab(dev_info);
++			rule_node->clk = max(dev_info->cur_clk_hz[ACTIVE_CTX],
++						dev_info->cur_clk_hz[DUAL_CTX]);
++			list_add_tail(&rule_node->link, &input_list);
++		}
++
++		next_dev = lnode->next_dev;
++		curr_idx = lnode->next;
++	}
++
++	if (rules_registered) {
++		msm_rules_update_path(&input_list, &apply_list);
++		msm_bus_apply_rules(&apply_list, false);
++	}
++
++	msm_bus_commit_data(dirty_nodes, ctx, num_dirty);
++
++	if (rules_registered) {
++		msm_bus_apply_rules(&apply_list, true);
++		del_inp_list(&input_list);
++		del_op_list(&apply_list);
++	}
++exit_update_path:
++	return ret;
++}
++
++static int remove_path(int src, int dst, uint64_t cur_ib, uint64_t cur_ab,
++				int src_idx, int active_only)
++{
++	struct device *src_dev = NULL;
++	struct device *next_dev = NULL;
++	struct link_node *lnode = NULL;
++	struct msm_bus_node_device_type *dev_info = NULL;
++	int ret = 0;
++	int cur_idx = src_idx;
++	int next_idx;
++
++	/* Update the current path to zero out all request from
++	 * this cient on all paths
++	 */
++
++	ret = update_path(src, dst, 0, 0, cur_ib, cur_ab, src_idx,
++							active_only);
++	if (ret) {
++		MSM_BUS_ERR("%s: Error zeroing out path ctx %d",
++					__func__, ACTIVE_CTX);
++		goto exit_remove_path;
++	}
++
++	src_dev = bus_find_device(&msm_bus_type, NULL,
++				(void *) &src,
++				msm_bus_device_match_adhoc);
++	if (!src_dev) {
++		MSM_BUS_ERR("%s: Can't find source device %d", __func__, src);
++		ret = -ENODEV;
++		goto exit_remove_path;
++	}
++
++	next_dev = src_dev;
++
++	while (next_dev) {
++		dev_info = next_dev->platform_data;
++		lnode = &dev_info->lnode_list[cur_idx];
++		next_idx = lnode->next;
++		next_dev = lnode->next_dev;
++		remove_lnode(dev_info, cur_idx);
++		cur_idx = next_idx;
++	}
++
++exit_remove_path:
++	return ret;
++}
++
++static void getpath_debug(int src, int curr, int active_only)
++{
++	struct device *dev_node;
++	struct device *dev_it;
++	unsigned int hop = 1;
++	int idx;
++	struct msm_bus_node_device_type *devinfo;
++	int i;
++
++	dev_node = bus_find_device(&msm_bus_type, NULL,
++				(void *) &src,
++				msm_bus_device_match_adhoc);
++
++	if (!dev_node) {
++		MSM_BUS_ERR("SRC NOT FOUND %d", src);
++		return;
++	}
++
++	idx = curr;
++	devinfo = dev_node->platform_data;
++	dev_it = dev_node;
++
++	MSM_BUS_ERR("Route list Src %d", src);
++	while (dev_it) {
++		struct msm_bus_node_device_type *busdev =
++			devinfo->node_info->bus_device->platform_data;
++
++		MSM_BUS_ERR("Hop[%d] at Device %d ctx %d", hop,
++					devinfo->node_info->id, active_only);
++
++		for (i = 0; i < NUM_CTX; i++) {
++			MSM_BUS_ERR("dev info sel ib %llu",
++						devinfo->cur_clk_hz[i]);
++			MSM_BUS_ERR("dev info sel ab %llu",
++						devinfo->node_ab.ab[i]);
++		}
++
++		dev_it = devinfo->lnode_list[idx].next_dev;
++		idx = devinfo->lnode_list[idx].next;
++		if (dev_it)
++			devinfo = dev_it->platform_data;
++
++		MSM_BUS_ERR("Bus Device %d", busdev->node_info->id);
++		MSM_BUS_ERR("Bus Clock %llu", busdev->clk[active_only].rate);
++
++		if (idx < 0)
++			break;
++		hop++;
++	}
++}
++
++static void unregister_client_adhoc(uint32_t cl)
++{
++	int i;
++	struct msm_bus_scale_pdata *pdata;
++	int lnode, src, curr, dest;
++	uint64_t  cur_clk, cur_bw;
++	struct msm_bus_client *client;
++
++	mutex_lock(&msm_bus_adhoc_lock);
++	if (!cl) {
++		MSM_BUS_ERR("%s: Null cl handle passed unregister\n",
++				__func__);
++		goto exit_unregister_client;
++	}
++	client = handle_list.cl_list[cl];
++	pdata = client->pdata;
++	if (!pdata) {
++		MSM_BUS_ERR("%s: Null pdata passed to unregister\n",
++				__func__);
++		goto exit_unregister_client;
++	}
++
++	curr = client->curr;
++	if (curr >= pdata->num_usecases) {
++		MSM_BUS_ERR("Invalid index Defaulting curr to 0");
++		curr = 0;
++	}
++
++	MSM_BUS_DBG("%s: Unregistering client %p", __func__, client);
++
++	for (i = 0; i < pdata->usecase->num_paths; i++) {
++		src = client->pdata->usecase[curr].vectors[i].src;
++		dest = client->pdata->usecase[curr].vectors[i].dst;
++
++		lnode = client->src_pnode[i];
++		cur_clk = client->pdata->usecase[curr].vectors[i].ib;
++		cur_bw = client->pdata->usecase[curr].vectors[i].ab;
++		remove_path(src, dest, cur_clk, cur_bw, lnode,
++						pdata->active_only);
++	}
++	msm_bus_dbg_client_data(client->pdata, MSM_BUS_DBG_UNREGISTER, cl);
++	kfree(client->src_pnode);
++	kfree(client);
++	handle_list.cl_list[cl] = NULL;
++exit_unregister_client:
++	mutex_unlock(&msm_bus_adhoc_lock);
++	return;
++}
++
++static int alloc_handle_lst(int size)
++{
++	int ret = 0;
++	struct msm_bus_client **t_cl_list;
++
++	if (!handle_list.num_entries) {
++		t_cl_list = kzalloc(sizeof(struct msm_bus_client *)
++			* NUM_CL_HANDLES, GFP_KERNEL);
++		if (ZERO_OR_NULL_PTR(t_cl_list)) {
++			ret = -ENOMEM;
++			MSM_BUS_ERR("%s: Failed to allocate handles list",
++								__func__);
++			goto exit_alloc_handle_lst;
++		}
++		handle_list.cl_list = t_cl_list;
++		handle_list.num_entries += NUM_CL_HANDLES;
++	} else {
++		t_cl_list = krealloc(handle_list.cl_list,
++				sizeof(struct msm_bus_client *) *
++				handle_list.num_entries + NUM_CL_HANDLES,
++				GFP_KERNEL);
++		if (ZERO_OR_NULL_PTR(t_cl_list)) {
++			ret = -ENOMEM;
++			MSM_BUS_ERR("%s: Failed to allocate handles list",
++								__func__);
++			goto exit_alloc_handle_lst;
++		}
++
++		memset(&handle_list.cl_list[handle_list.num_entries], 0,
++			NUM_CL_HANDLES * sizeof(struct msm_bus_client *));
++		handle_list.num_entries += NUM_CL_HANDLES;
++		handle_list.cl_list = t_cl_list;
++	}
++exit_alloc_handle_lst:
++	return ret;
++}
++
++static uint32_t gen_handle(struct msm_bus_client *client)
++{
++	uint32_t handle = 0;
++	int i;
++	int ret = 0;
++
++	for (i = 0; i < handle_list.num_entries; i++) {
++		if (i && !handle_list.cl_list[i]) {
++			handle = i;
++			break;
++		}
++	}
++
++	if (!handle) {
++		ret = alloc_handle_lst(NUM_CL_HANDLES);
++
++		if (ret) {
++			MSM_BUS_ERR("%s: Failed to allocate handle list",
++							__func__);
++			goto exit_gen_handle;
++		}
++		handle = i + 1;
++	}
++	handle_list.cl_list[handle] = client;
++exit_gen_handle:
++	return handle;
++}
++
++static uint32_t register_client_adhoc(struct msm_bus_scale_pdata *pdata)
++{
++	int src, dest;
++	int i;
++	struct msm_bus_client *client = NULL;
++	int *lnode;
++	uint32_t handle = 0;
++
++	mutex_lock(&msm_bus_adhoc_lock);
++	client = kzalloc(sizeof(struct msm_bus_client), GFP_KERNEL);
++	if (!client) {
++		MSM_BUS_ERR("%s: Error allocating client data", __func__);
++		goto exit_register_client;
++	}
++	client->pdata = pdata;
++
++	lnode = kzalloc(pdata->usecase->num_paths * sizeof(int), GFP_KERNEL);
++	if (ZERO_OR_NULL_PTR(lnode)) {
++		MSM_BUS_ERR("%s: Error allocating pathnode ptr!", __func__);
++		goto exit_register_client;
++	}
++	client->src_pnode = lnode;
++
++	for (i = 0; i < pdata->usecase->num_paths; i++) {
++		src = pdata->usecase->vectors[i].src;
++		dest = pdata->usecase->vectors[i].dst;
++
++		if ((src < 0) || (dest < 0)) {
++			MSM_BUS_ERR("%s:Invalid src/dst.src %d dest %d",
++				__func__, src, dest);
++			goto exit_register_client;
++		}
++
++		lnode[i] = getpath(src, dest);
++		if (lnode[i] < 0) {
++			MSM_BUS_ERR("%s:Failed to find path.src %d dest %d",
++				__func__, src, dest);
++			goto exit_register_client;
++		}
++	}
++
++	handle = gen_handle(client);
++	msm_bus_dbg_client_data(client->pdata, MSM_BUS_DBG_REGISTER,
++					handle);
++	MSM_BUS_DBG("%s:Client handle %d %s", __func__, handle,
++						client->pdata->name);
++exit_register_client:
++	mutex_unlock(&msm_bus_adhoc_lock);
++	return handle;
++}
++
++static int update_request_adhoc(uint32_t cl, unsigned int index)
++{
++	int i, ret = 0;
++	struct msm_bus_scale_pdata *pdata;
++	int lnode, src, curr, dest;
++	uint64_t req_clk, req_bw, curr_clk, curr_bw;
++	struct msm_bus_client *client;
++	const char *test_cl = "Null";
++	bool log_transaction = false;
++
++	mutex_lock(&msm_bus_adhoc_lock);
++
++	if (!cl) {
++		MSM_BUS_ERR("%s: Invalid client handle %d", __func__, cl);
++		ret = -ENXIO;
++		goto exit_update_request;
++	}
++
++	client = handle_list.cl_list[cl];
++	pdata = client->pdata;
++	if (!pdata) {
++		MSM_BUS_ERR("%s: Client data Null.[client didn't register]",
++				__func__);
++		ret = -ENXIO;
++		goto exit_update_request;
++	}
++
++	if (index >= pdata->num_usecases) {
++		MSM_BUS_ERR("Client %u passed invalid index: %d\n",
++			cl, index);
++		ret = -ENXIO;
++		goto exit_update_request;
++	}
++
++	if (client->curr == index) {
++		MSM_BUS_DBG("%s: Not updating client request idx %d unchanged",
++				__func__, index);
++		goto exit_update_request;
++	}
++
++	curr = client->curr;
++	client->curr = index;
++
++	if (!strcmp(test_cl, pdata->name))
++		log_transaction = true;
++
++	MSM_BUS_DBG("%s: cl: %u index: %d curr: %d num_paths: %d\n", __func__,
++		cl, index, client->curr, client->pdata->usecase->num_paths);
++
++	for (i = 0; i < pdata->usecase->num_paths; i++) {
++		src = client->pdata->usecase[index].vectors[i].src;
++		dest = client->pdata->usecase[index].vectors[i].dst;
++
++		lnode = client->src_pnode[i];
++		req_clk = client->pdata->usecase[index].vectors[i].ib;
++		req_bw = client->pdata->usecase[index].vectors[i].ab;
++		if (curr < 0) {
++			curr_clk = 0;
++			curr_bw = 0;
++		} else {
++			curr_clk = client->pdata->usecase[curr].vectors[i].ib;
++			curr_bw = client->pdata->usecase[curr].vectors[i].ab;
++			MSM_BUS_DBG("%s:ab: %llu ib: %llu\n", __func__,
++					curr_bw, curr_clk);
++		}
++
++		ret = update_path(src, dest, req_clk, req_bw,
++				curr_clk, curr_bw, lnode, pdata->active_only);
++
++		if (ret) {
++			MSM_BUS_ERR("%s: Update path failed! %d ctx %d\n",
++					__func__, ret, ACTIVE_CTX);
++			goto exit_update_request;
++		}
++
++		if (log_transaction)
++			getpath_debug(src, lnode, pdata->active_only);
++	}
++	msm_bus_dbg_client_data(client->pdata, index , cl);
++exit_update_request:
++	mutex_unlock(&msm_bus_adhoc_lock);
++	return ret;
++}
++
++/**
++ *  msm_bus_arb_setops_adhoc() : Setup the bus arbitration ops
++ *  @ arb_ops: pointer to the arb ops.
++ */
++void msm_bus_arb_setops_adhoc(struct msm_bus_arb_ops *arb_ops)
++{
++	arb_ops->register_client = register_client_adhoc;
++	arb_ops->update_request = update_request_adhoc;
++	arb_ops->unregister_client = unregister_client_adhoc;
++}
+--- /dev/null
++++ b/drivers/bus/msm_bus/msm_bus_bimc.c
+@@ -0,0 +1,2112 @@
++/* Copyright (c) 2012-2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++
++#define pr_fmt(fmt) "AXI: BIMC: %s(): " fmt, __func__
++
++#include <linux/slab.h>
++#include <linux/io.h>
++#include "msm-bus-board.h"
++#include "msm_bus_core.h"
++#include "msm_bus_bimc.h"
++#include "msm_bus_adhoc.h"
++#include <trace/events/trace_msm_bus.h>
++
++enum msm_bus_bimc_slave_block {
++	SLAVE_BLOCK_RESERVED = 0,
++	SLAVE_BLOCK_SLAVE_WAY,
++	SLAVE_BLOCK_XPU,
++	SLAVE_BLOCK_ARBITER,
++	SLAVE_BLOCK_SCMO,
++};
++
++enum bke_sw {
++	BKE_OFF = 0,
++	BKE_ON = 1,
++};
++
++/* M_Generic */
++
++#define M_REG_BASE(b)		((b) + 0x00008000)
++
++#define M_COMPONENT_INFO_ADDR(b, n) \
++		(M_REG_BASE(b) + (0x4000 * (n)) + 0x00000000)
++enum bimc_m_component_info {
++	M_COMPONENT_INFO_RMSK		= 0xffffff,
++	M_COMPONENT_INFO_INSTANCE_BMSK	= 0xff0000,
++	M_COMPONENT_INFO_INSTANCE_SHFT	= 0x10,
++	M_COMPONENT_INFO_SUB_TYPE_BMSK	= 0xff00,
++	M_COMPONENT_INFO_SUB_TYPE_SHFT	= 0x8,
++	M_COMPONENT_INFO_TYPE_BMSK	= 0xff,
++	M_COMPONENT_INFO_TYPE_SHFT	= 0x0,
++};
++
++#define M_CONFIG_INFO_0_ADDR(b, n) \
++	(M_REG_BASE(b) + (0x4000 * (n)) + 0x00000020)
++enum bimc_m_config_info_0 {
++	M_CONFIG_INFO_0_RMSK			= 0xff00ffff,
++	M_CONFIG_INFO_0_SYNC_MODE_BMSK		= 0xff000000,
++	M_CONFIG_INFO_0_SYNC_MODE_SHFT		= 0x18,
++	M_CONFIG_INFO_0_CONNECTION_TYPE_BMSK	= 0xff00,
++	M_CONFIG_INFO_0_CONNECTION_TYPE_SHFT	= 0x8,
++	M_CONFIG_INFO_0_FUNC_BMSK		= 0xff,
++	M_CONFIG_INFO_0_FUNC_SHFT		= 0x0,
++};
++
++#define M_CONFIG_INFO_1_ADDR(b, n) \
++	(M_REG_BASE(b) + (0x4000 * (n)) + 0x00000030)
++enum bimc_m_config_info_1 {
++	M_CONFIG_INFO_1_RMSK			= 0xffffffff,
++	M_CONFIG_INFO_1_SWAY_CONNECTIVITY_BMSK	= 0xffffffff,
++	M_CONFIG_INFO_1_SWAY_CONNECTIVITY_SHFT	= 0x0,
++};
++
++#define M_CONFIG_INFO_2_ADDR(b, n) \
++	(M_REG_BASE(b) + (0x4000 * (n)) + 0x00000040)
++enum bimc_m_config_info_2 {
++	M_CONFIG_INFO_2_RMSK			= 0xffffffff,
++	M_CONFIG_INFO_2_M_DATA_WIDTH_BMSK	= 0xffff0000,
++	M_CONFIG_INFO_2_M_DATA_WIDTH_SHFT	= 0x10,
++	M_CONFIG_INFO_2_M_TID_WIDTH_BMSK	= 0xff00,
++	M_CONFIG_INFO_2_M_TID_WIDTH_SHFT	= 0x8,
++	M_CONFIG_INFO_2_M_MID_WIDTH_BMSK	= 0xff,
++	M_CONFIG_INFO_2_M_MID_WIDTH_SHFT	= 0x0,
++};
++
++#define M_CONFIG_INFO_3_ADDR(b, n) \
++	(M_REG_BASE(b) + (0x4000 * (n)) + 0x00000050)
++enum bimc_m_config_info_3 {
++	M_CONFIG_INFO_3_RMSK			= 0xffffffff,
++	M_CONFIG_INFO_3_RCH_DEPTH_BMSK		= 0xff000000,
++	M_CONFIG_INFO_3_RCH_DEPTH_SHFT		= 0x18,
++	M_CONFIG_INFO_3_BCH_DEPTH_BMSK		= 0xff0000,
++	M_CONFIG_INFO_3_BCH_DEPTH_SHFT		= 0x10,
++	M_CONFIG_INFO_3_WCH_DEPTH_BMSK		= 0xff00,
++	M_CONFIG_INFO_3_WCH_DEPTH_SHFT		= 0x8,
++	M_CONFIG_INFO_3_ACH_DEPTH_BMSK		= 0xff,
++	M_CONFIG_INFO_3_ACH_DEPTH_SHFT		= 0x0,
++};
++
++#define M_CONFIG_INFO_4_ADDR(b, n) \
++	(M_REG_BASE(b) + (0x4000 * (n)) + 0x00000060)
++enum bimc_m_config_info_4 {
++	M_CONFIG_INFO_4_RMSK			= 0xffff,
++	M_CONFIG_INFO_4_REORDER_BUF_DEPTH_BMSK	= 0xff00,
++	M_CONFIG_INFO_4_REORDER_BUF_DEPTH_SHFT	= 0x8,
++	M_CONFIG_INFO_4_REORDER_TABLE_DEPTH_BMSK	= 0xff,
++	M_CONFIG_INFO_4_REORDER_TABLE_DEPTH_SHFT	= 0x0,
++};
++
++#define M_CONFIG_INFO_5_ADDR(b, n) \
++	(M_REG_BASE(b) + (0x4000 * (n)) + 0x00000070)
++enum bimc_m_config_info_5 {
++	M_CONFIG_INFO_5_RMSK			= 0x111,
++	M_CONFIG_INFO_5_MP2ARB_PIPELINE_EN_BMSK	= 0x100,
++	M_CONFIG_INFO_5_MP2ARB_PIPELINE_EN_SHFT	= 0x8,
++	M_CONFIG_INFO_5_MPBUF_PIPELINE_EN_BMSK	= 0x10,
++	M_CONFIG_INFO_5_MPBUF_PIPELINE_EN_SHFT	= 0x4,
++	M_CONFIG_INFO_5_M2MP_PIPELINE_EN_BMSK	= 0x1,
++	M_CONFIG_INFO_5_M2MP_PIPELINE_EN_SHFT	= 0x0,
++};
++
++#define M_INT_STATUS_ADDR(b, n) \
++	(M_REG_BASE(b) + (0x4000 * (n)) + 0x00000100)
++enum bimc_m_int_status {
++	M_INT_STATUS_RMSK			= 0x3,
++};
++
++#define M_INT_CLR_ADDR(b, n) \
++	(M_REG_BASE(b) + (0x4000 * (n)) + 0x00000108)
++enum bimc_m_int_clr {
++	M_INT_CLR_RMSK			= 0x3,
++};
++
++#define M_INT_EN_ADDR(b, n) \
++	(M_REG_BASE(b) + (0x4000 * (n)) + 0x0000010c)
++enum bimc_m_int_en {
++	M_INT_EN_RMSK			= 0x3,
++};
++
++#define M_CLK_CTRL_ADDR(b, n) \
++	(M_REG_BASE(b) + (0x4000 * (n)) + 0x00000200)
++enum bimc_m_clk_ctrl {
++	M_CLK_CTRL_RMSK				= 0x3,
++	M_CLK_CTRL_MAS_CLK_GATING_EN_BMSK	= 0x2,
++	M_CLK_CTRL_MAS_CLK_GATING_EN_SHFT	= 0x1,
++	M_CLK_CTRL_CORE_CLK_GATING_EN_BMSK	= 0x1,
++	M_CLK_CTRL_CORE_CLK_GATING_EN_SHFT	= 0x0,
++};
++
++#define M_MODE_ADDR(b, n) \
++		(M_REG_BASE(b) + (0x4000 * (n)) + 0x00000210)
++enum bimc_m_mode {
++	M_MODE_RMSK				= 0xf0000011,
++	M_MODE_WR_GATHER_BEATS_BMSK		= 0xf0000000,
++	M_MODE_WR_GATHER_BEATS_SHFT		= 0x1c,
++	M_MODE_NARROW_WR_BMSK			= 0x10,
++	M_MODE_NARROW_WR_SHFT			= 0x4,
++	M_MODE_ORDERING_MODEL_BMSK		= 0x1,
++	M_MODE_ORDERING_MODEL_SHFT		= 0x0,
++};
++
++#define M_PRIOLVL_OVERRIDE_ADDR(b, n) \
++	(M_REG_BASE(b) + (0x4000 * (n)) + 0x00000230)
++enum bimc_m_priolvl_override {
++	M_PRIOLVL_OVERRIDE_RMSK			= 0x301,
++	M_PRIOLVL_OVERRIDE_BMSK			= 0x300,
++	M_PRIOLVL_OVERRIDE_SHFT			= 0x8,
++	M_PRIOLVL_OVERRIDE_OVERRIDE_PRIOLVL_BMSK	= 0x1,
++	M_PRIOLVL_OVERRIDE_OVERRIDE_PRIOLVL_SHFT	= 0x0,
++};
++
++#define M_RD_CMD_OVERRIDE_ADDR(b, n) \
++	(M_REG_BASE(b) + (0x4000 * (n)) + 0x00000240)
++enum bimc_m_read_command_override {
++	M_RD_CMD_OVERRIDE_RMSK			= 0x3071f7f,
++	M_RD_CMD_OVERRIDE_AREQPRIO_BMSK		= 0x3000000,
++	M_RD_CMD_OVERRIDE_AREQPRIO_SHFT		= 0x18,
++	M_RD_CMD_OVERRIDE_AMEMTYPE_BMSK		= 0x70000,
++	M_RD_CMD_OVERRIDE_AMEMTYPE_SHFT		= 0x10,
++	M_RD_CMD_OVERRIDE_ATRANSIENT_BMSK		= 0x1000,
++	M_RD_CMD_OVERRIDE_ATRANSIENT_SHFT		= 0xc,
++	M_RD_CMD_OVERRIDE_ASHARED_BMSK		= 0x800,
++	M_RD_CMD_OVERRIDE_ASHARED_SHFT		= 0xb,
++	M_RD_CMD_OVERRIDE_AREDIRECT_BMSK		= 0x400,
++	M_RD_CMD_OVERRIDE_AREDIRECT_SHFT		= 0xa,
++	M_RD_CMD_OVERRIDE_AOOO_BMSK			= 0x200,
++	M_RD_CMD_OVERRIDE_AOOO_SHFT			= 0x9,
++	M_RD_CMD_OVERRIDE_AINNERSHARED_BMSK		= 0x100,
++	M_RD_CMD_OVERRIDE_AINNERSHARED_SHFT		= 0x8,
++	M_RD_CMD_OVERRIDE_OVERRIDE_AREQPRIO_BMSK	= 0x40,
++	M_RD_CMD_OVERRIDE_OVERRIDE_AREQPRIO_SHFT	= 0x6,
++	M_RD_CMD_OVERRIDE_OVERRIDE_ATRANSIENT_BMSK	= 0x20,
++	M_RD_CMD_OVERRIDE_OVERRIDE_ATRANSIENT_SHFT	= 0x5,
++	M_RD_CMD_OVERRIDE_OVERRIDE_AMEMTYPE_BMSK	= 0x10,
++	M_RD_CMD_OVERRIDE_OVERRIDE_AMEMTYPE_SHFT	= 0x4,
++	M_RD_CMD_OVERRIDE_OVERRIDE_ASHARED_BMSK	= 0x8,
++	M_RD_CMD_OVERRIDE_OVERRIDE_ASHARED_SHFT	= 0x3,
++	M_RD_CMD_OVERRIDE_OVERRIDE_AREDIRECT_BMSK	= 0x4,
++	M_RD_CMD_OVERRIDE_OVERRIDE_AREDIRECT_SHFT	= 0x2,
++	M_RD_CMD_OVERRIDE_OVERRIDE_AOOO_BMSK		= 0x2,
++	M_RD_CMD_OVERRIDE_OVERRIDE_AOOO_SHFT		= 0x1,
++	M_RD_CMD_OVERRIDE_OVERRIDE_AINNERSHARED_BMSK	= 0x1,
++	M_RD_CMD_OVERRIDE_OVERRIDE_AINNERSHARED_SHFT	= 0x0,
++};
++
++#define M_WR_CMD_OVERRIDE_ADDR(b, n) \
++	(M_REG_BASE(b) + (0x4000 * (n)) + 0x00000250)
++enum bimc_m_write_command_override {
++	M_WR_CMD_OVERRIDE_RMSK			= 0x3071f7f,
++	M_WR_CMD_OVERRIDE_AREQPRIO_BMSK		= 0x3000000,
++	M_WR_CMD_OVERRIDE_AREQPRIO_SHFT		= 0x18,
++	M_WR_CMD_OVERRIDE_AMEMTYPE_BMSK		= 0x70000,
++	M_WR_CMD_OVERRIDE_AMEMTYPE_SHFT		= 0x10,
++	M_WR_CMD_OVERRIDE_ATRANSIENT_BMSK	= 0x1000,
++	M_WR_CMD_OVERRIDE_ATRANSIENT_SHFT	= 0xc,
++	M_WR_CMD_OVERRIDE_ASHARED_BMSK		= 0x800,
++	M_WR_CMD_OVERRIDE_ASHARED_SHFT		= 0xb,
++	M_WR_CMD_OVERRIDE_AREDIRECT_BMSK		= 0x400,
++	M_WR_CMD_OVERRIDE_AREDIRECT_SHFT		= 0xa,
++	M_WR_CMD_OVERRIDE_AOOO_BMSK			= 0x200,
++	M_WR_CMD_OVERRIDE_AOOO_SHFT			= 0x9,
++	M_WR_CMD_OVERRIDE_AINNERSHARED_BMSK		= 0x100,
++	M_WR_CMD_OVERRIDE_AINNERSHARED_SHFT		= 0x8,
++	M_WR_CMD_OVERRIDE_OVERRIDE_AREQPRIO_BMSK	= 0x40,
++	M_WR_CMD_OVERRIDE_OVERRIDE_AREQPRIO_SHFT	= 0x6,
++	M_WR_CMD_OVERRIDE_OVERRIDE_ATRANSIENT_BMSK	= 0x20,
++	M_WR_CMD_OVERRIDE_OVERRIDE_ATRANSIENT_SHFT	= 0x5,
++	M_WR_CMD_OVERRIDE_OVERRIDE_AMEMTYPE_BMSK	= 0x10,
++	M_WR_CMD_OVERRIDE_OVERRIDE_AMEMTYPE_SHFT	= 0x4,
++	M_WR_CMD_OVERRIDE_OVERRIDE_ASHARED_BMSK	= 0x8,
++	M_WR_CMD_OVERRIDE_OVERRIDE_ASHARED_SHFT	= 0x3,
++	M_WR_CMD_OVERRIDE_OVERRIDE_AREDIRECT_BMSK	= 0x4,
++	M_WR_CMD_OVERRIDE_OVERRIDE_AREDIRECT_SHFT	= 0x2,
++	M_WR_CMD_OVERRIDE_OVERRIDE_AOOO_BMSK	= 0x2,
++	M_WR_CMD_OVERRIDE_OVERRIDE_AOOO_SHFT	= 0x1,
++	M_WR_CMD_OVERRIDE_OVERRIDE_AINNERSHARED_BMSK	= 0x1,
++	M_WR_CMD_OVERRIDE_OVERRIDE_AINNERSHARED_SHFT	= 0x0,
++};
++
++#define M_BKE_EN_ADDR(b, n) \
++	(M_REG_BASE(b) + (0x4000 * (n)) + 0x00000300)
++enum bimc_m_bke_en {
++	M_BKE_EN_RMSK			= 0x1,
++	M_BKE_EN_EN_BMSK		= 0x1,
++	M_BKE_EN_EN_SHFT		= 0x0,
++};
++
++/* Grant Period registers */
++#define M_BKE_GP_ADDR(b, n) \
++	(M_REG_BASE(b) + (0x4000 * (n)) + 0x00000304)
++enum bimc_m_bke_grant_period {
++	M_BKE_GP_RMSK		= 0x3ff,
++	M_BKE_GP_GP_BMSK	= 0x3ff,
++	M_BKE_GP_GP_SHFT	= 0x0,
++};
++
++/* Grant count register.
++ * The Grant count register represents a signed 16 bit
++ * value, range 0-0x7fff
++ */
++#define M_BKE_GC_ADDR(b, n) \
++	(M_REG_BASE(b) + (0x4000 * (n)) + 0x00000308)
++enum bimc_m_bke_grant_count {
++	M_BKE_GC_RMSK			= 0xffff,
++	M_BKE_GC_GC_BMSK		= 0xffff,
++	M_BKE_GC_GC_SHFT		= 0x0,
++};
++
++/* Threshold High Registers */
++#define M_BKE_THH_ADDR(b, n) \
++	(M_REG_BASE(b) + (0x4000 * (n)) + 0x00000320)
++enum bimc_m_bke_thresh_high {
++	M_BKE_THH_RMSK		= 0xffff,
++	M_BKE_THH_THRESH_BMSK	= 0xffff,
++	M_BKE_THH_THRESH_SHFT	= 0x0,
++};
++
++/* Threshold Medium Registers */
++#define M_BKE_THM_ADDR(b, n) \
++	(M_REG_BASE(b) + (0x4000 * (n)) + 0x00000324)
++enum bimc_m_bke_thresh_medium {
++	M_BKE_THM_RMSK		= 0xffff,
++	M_BKE_THM_THRESH_BMSK	= 0xffff,
++	M_BKE_THM_THRESH_SHFT	= 0x0,
++};
++
++/* Threshold Low Registers */
++#define M_BKE_THL_ADDR(b, n) \
++	(M_REG_BASE(b) + (0x4000 * (n)) + 0x00000328)
++enum bimc_m_bke_thresh_low {
++	M_BKE_THL_RMSK			= 0xffff,
++	M_BKE_THL_THRESH_BMSK		= 0xffff,
++	M_BKE_THL_THRESH_SHFT		= 0x0,
++};
++
++#define M_BKE_HEALTH_0_CONFIG_ADDR(b, n) \
++	(M_REG_BASE(b) + (0x4000 * (n)) + 0x00000340)
++enum bimc_m_bke_health_0 {
++	M_BKE_HEALTH_0_CONFIG_RMSK			= 0x80000303,
++	M_BKE_HEALTH_0_CONFIG_LIMIT_CMDS_BMSK		= 0x80000000,
++	M_BKE_HEALTH_0_CONFIG_LIMIT_CMDS_SHFT		= 0x1f,
++	M_BKE_HEALTH_0_CONFIG_AREQPRIO_BMSK		= 0x300,
++	M_BKE_HEALTH_0_CONFIG_AREQPRIO_SHFT		= 0x8,
++	M_BKE_HEALTH_0_CONFIG_PRIOLVL_BMSK		= 0x3,
++	M_BKE_HEALTH_0_CONFIG_PRIOLVL_SHFT		= 0x0,
++};
++
++#define M_BKE_HEALTH_1_CONFIG_ADDR(b, n) \
++	(M_REG_BASE(b) + (0x4000 * (n)) + 0x00000344)
++enum bimc_m_bke_health_1 {
++	M_BKE_HEALTH_1_CONFIG_RMSK			= 0x80000303,
++	M_BKE_HEALTH_1_CONFIG_LIMIT_CMDS_BMSK		= 0x80000000,
++	M_BKE_HEALTH_1_CONFIG_LIMIT_CMDS_SHFT		= 0x1f,
++	M_BKE_HEALTH_1_CONFIG_AREQPRIO_BMSK		= 0x300,
++	M_BKE_HEALTH_1_CONFIG_AREQPRIO_SHFT		= 0x8,
++	M_BKE_HEALTH_1_CONFIG_PRIOLVL_BMSK		= 0x3,
++	M_BKE_HEALTH_1_CONFIG_PRIOLVL_SHFT		= 0x0,
++};
++
++#define M_BKE_HEALTH_2_CONFIG_ADDR(b, n) \
++	(M_REG_BASE(b) + (0x4000 * (n)) + 0x00000348)
++enum bimc_m_bke_health_2 {
++	M_BKE_HEALTH_2_CONFIG_RMSK			= 0x80000303,
++	M_BKE_HEALTH_2_CONFIG_LIMIT_CMDS_BMSK		= 0x80000000,
++	M_BKE_HEALTH_2_CONFIG_LIMIT_CMDS_SHFT		= 0x1f,
++	M_BKE_HEALTH_2_CONFIG_AREQPRIO_BMSK		= 0x300,
++	M_BKE_HEALTH_2_CONFIG_AREQPRIO_SHFT		= 0x8,
++	M_BKE_HEALTH_2_CONFIG_PRIOLVL_BMSK		= 0x3,
++	M_BKE_HEALTH_2_CONFIG_PRIOLVL_SHFT		= 0x0,
++};
++
++#define M_BKE_HEALTH_3_CONFIG_ADDR(b, n) \
++	(M_REG_BASE(b) + (0x4000 * (n)) + 0x0000034c)
++enum bimc_m_bke_health_3 {
++	M_BKE_HEALTH_3_CONFIG_RMSK			= 0x303,
++	M_BKE_HEALTH_3_CONFIG_AREQPRIO_BMSK	= 0x300,
++	M_BKE_HEALTH_3_CONFIG_AREQPRIO_SHFT	= 0x8,
++	M_BKE_HEALTH_3_CONFIG_PRIOLVL_BMSK		= 0x3,
++	M_BKE_HEALTH_3_CONFIG_PRIOLVL_SHFT		= 0x0,
++};
++
++#define M_BUF_STATUS_ADDR(b, n) \
++		(M_REG_BASE(b) + (0x4000 * (n)) + 0x00000400)
++enum bimc_m_buf_status {
++	M_BUF_STATUS_RMSK			= 0xf03f030,
++	M_BUF_STATUS_RCH_DATA_WR_FULL_BMSK	= 0x8000000,
++	M_BUF_STATUS_RCH_DATA_WR_FULL_SHFT	= 0x1b,
++	M_BUF_STATUS_RCH_DATA_WR_EMPTY_BMSK	= 0x4000000,
++	M_BUF_STATUS_RCH_DATA_WR_EMPTY_SHFT	= 0x1a,
++	M_BUF_STATUS_RCH_CTRL_WR_FULL_BMSK	= 0x2000000,
++	M_BUF_STATUS_RCH_CTRL_WR_FULL_SHFT	= 0x19,
++	M_BUF_STATUS_RCH_CTRL_WR_EMPTY_BMSK	= 0x1000000,
++	M_BUF_STATUS_RCH_CTRL_WR_EMPTY_SHFT	= 0x18,
++	M_BUF_STATUS_BCH_WR_FULL_BMSK		= 0x20000,
++	M_BUF_STATUS_BCH_WR_FULL_SHFT		= 0x11,
++	M_BUF_STATUS_BCH_WR_EMPTY_BMSK		= 0x10000,
++	M_BUF_STATUS_BCH_WR_EMPTY_SHFT		= 0x10,
++	M_BUF_STATUS_WCH_DATA_RD_FULL_BMSK	= 0x8000,
++	M_BUF_STATUS_WCH_DATA_RD_FULL_SHFT	= 0xf,
++	M_BUF_STATUS_WCH_DATA_RD_EMPTY_BMSK	= 0x4000,
++	M_BUF_STATUS_WCH_DATA_RD_EMPTY_SHFT	= 0xe,
++	M_BUF_STATUS_WCH_CTRL_RD_FULL_BMSK	= 0x2000,
++	M_BUF_STATUS_WCH_CTRL_RD_FULL_SHFT	= 0xd,
++	M_BUF_STATUS_WCH_CTRL_RD_EMPTY_BMSK	= 0x1000,
++	M_BUF_STATUS_WCH_CTRL_RD_EMPTY_SHFT	= 0xc,
++	M_BUF_STATUS_ACH_RD_FULL_BMSK		= 0x20,
++	M_BUF_STATUS_ACH_RD_FULL_SHFT		= 0x5,
++	M_BUF_STATUS_ACH_RD_EMPTY_BMSK		= 0x10,
++	M_BUF_STATUS_ACH_RD_EMPTY_SHFT		= 0x4,
++};
++/*BIMC Generic */
++
++#define S_REG_BASE(b)	((b) + 0x00048000)
++
++#define S_COMPONENT_INFO_ADDR(b, n) \
++	(S_REG_BASE(b) + (0x8000 * (n)) + 0x00000000)
++enum bimc_s_component_info {
++	S_COMPONENT_INFO_RMSK			= 0xffffff,
++	S_COMPONENT_INFO_INSTANCE_BMSK		= 0xff0000,
++	S_COMPONENT_INFO_INSTANCE_SHFT		= 0x10,
++	S_COMPONENT_INFO_SUB_TYPE_BMSK		= 0xff00,
++	S_COMPONENT_INFO_SUB_TYPE_SHFT		= 0x8,
++	S_COMPONENT_INFO_TYPE_BMSK		= 0xff,
++	S_COMPONENT_INFO_TYPE_SHFT		= 0x0,
++};
++
++#define S_HW_INFO_ADDR(b, n) \
++	(S_REG_BASE(b) + (0x80000 * (n)) + 0x00000010)
++enum bimc_s_hw_info {
++	S_HW_INFO_RMSK				= 0xffffffff,
++	S_HW_INFO_MAJOR_BMSK			= 0xff000000,
++	S_HW_INFO_MAJOR_SHFT			= 0x18,
++	S_HW_INFO_BRANCH_BMSK			= 0xff0000,
++	S_HW_INFO_BRANCH_SHFT			= 0x10,
++	S_HW_INFO_MINOR_BMSK			= 0xff00,
++	S_HW_INFO_MINOR_SHFT			= 0x8,
++	S_HW_INFO_ECO_BMSK			= 0xff,
++	S_HW_INFO_ECO_SHFT			= 0x0,
++};
++
++
++/* S_SCMO_GENERIC */
++
++#define S_SCMO_REG_BASE(b)	((b) + 0x00048000)
++
++#define S_SCMO_CONFIG_INFO_0_ADDR(b, n) \
++		(S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000020)
++enum bimc_s_scmo_config_info_0 {
++	S_SCMO_CONFIG_INFO_0_RMSK		= 0xffffffff,
++	S_SCMO_CONFIG_INFO_0_DATA_WIDTH_BMSK	= 0xffff0000,
++	S_SCMO_CONFIG_INFO_0_DATA_WIDTH_SHFT	= 0x10,
++	S_SCMO_CONFIG_INFO_0_TID_WIDTH_BMSK	= 0xff00,
++	S_SCMO_CONFIG_INFO_0_TID_WIDTH_SHFT	= 0x8,
++	S_SCMO_CONFIG_INFO_0_MID_WIDTH_BMSK	= 0xff,
++	S_SCMO_CONFIG_INFO_0_MID_WIDTH_SHFT	= 0x0,
++};
++
++#define S_SCMO_CONFIG_INFO_1_ADDR(b, n) \
++		(S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000030)
++enum bimc_s_scmo_config_info_1 {
++	S_SCMO_CONFIG_INFO_1_RMSK			= 0xffffffff,
++	S_SCMO_CONFIG_INFO_1_MPORT_CONNECTIVITY_BMSK	= 0xffffffff,
++	S_SCMO_CONFIG_INFO_1_MPORT_CONNECTIVITY_SHFT	= 0x0,
++};
++
++#define S_SCMO_CONFIG_INFO_2_ADDR(b, n) \
++		(S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000040)
++enum bimc_s_scmo_config_info_2 {
++	S_SCMO_CONFIG_INFO_2_RMSK			= 0xff00ff,
++	S_SCMO_CONFIG_INFO_2_NUM_GLOBAL_MONS_BMSK	= 0xff0000,
++	S_SCMO_CONFIG_INFO_2_NUM_GLOBAL_MONS_SHFT	= 0x10,
++	S_SCMO_CONFIG_INFO_2_VMID_WIDTH_BMSK	= 0xff,
++	S_SCMO_CONFIG_INFO_2_VMID_WIDTH_SHFT	= 0x0,
++};
++
++#define S_SCMO_CONFIG_INFO_3_ADDR(b, n) \
++		(S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000050)
++enum bimc_s_scmo_config_info_3 {
++	S_SCMO_CONFIG_INFO_3_RMSK			= 0xffffffff,
++	S_SCMO_CONFIG_INFO_3_RCH0_CTRL_DEPTH_BMSK	= 0xff000000,
++	S_SCMO_CONFIG_INFO_3_RCH0_CTRL_DEPTH_SHFT	= 0x18,
++	S_SCMO_CONFIG_INFO_3_RCH0_DEPTH_BMSK		= 0xff0000,
++	S_SCMO_CONFIG_INFO_3_RCH0_DEPTH_SHFT		= 0x10,
++	S_SCMO_CONFIG_INFO_3_BCH_DEPTH_BMSK		= 0xff00,
++	S_SCMO_CONFIG_INFO_3_BCH_DEPTH_SHFT		= 0x8,
++	S_SCMO_CONFIG_INFO_3_WCH_DEPTH_BMSK		= 0xff,
++	S_SCMO_CONFIG_INFO_3_WCH_DEPTH_SHFT		= 0x0,
++};
++
++#define S_SCMO_CONFIG_INFO_4_ADDR(b, n) \
++		(S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000060)
++enum bimc_s_scmo_config_info_4 {
++	S_SCMO_CONFIG_INFO_4_RMSK			= 0xffff,
++	S_SCMO_CONFIG_INFO_4_RCH1_CTRL_DEPTH_BMSK	= 0xff00,
++	S_SCMO_CONFIG_INFO_4_RCH1_CTRL_DEPTH_SHFT	= 0x8,
++	S_SCMO_CONFIG_INFO_4_RCH1_DEPTH_BMSK		= 0xff,
++	S_SCMO_CONFIG_INFO_4_RCH1_DEPTH_SHFT		= 0x0,
++};
++
++#define S_SCMO_CONFIG_INFO_5_ADDR(b, n) \
++		(S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000070)
++enum bimc_s_scmo_config_info_5 {
++	S_SCMO_CONFIG_INFO_5_RMSK			= 0xffff,
++	S_SCMO_CONFIG_INFO_5_DPE_CQ_DEPTH_BMSK		= 0xff00,
++	S_SCMO_CONFIG_INFO_5_DPE_CQ_DEPTH_SHFT		= 0x8,
++	S_SCMO_CONFIG_INFO_5_DDR_BUS_WIDTH_BMSK		= 0xff,
++	S_SCMO_CONFIG_INFO_5_DDR_BUS_WIDTH_SHFT		= 0x0,
++};
++
++#define S_SCMO_CONFIG_INFO_6_ADDR(b, n) \
++		(S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000080)
++enum bimc_s_scmo_config_info_6 {
++	S_SCMO_CONFIG_INFO_6_RMSK			= 0x1111,
++	S_SCMO_CONFIG_INFO_6_WBUFC_PIPE_BMSK		= 0x1000,
++	S_SCMO_CONFIG_INFO_6_WBUFC_PIPE_SHFT		= 0xc,
++	S_SCMO_CONFIG_INFO_6_RDOPT_PIPE_BMSK		= 0x100,
++	S_SCMO_CONFIG_INFO_6_RDOPT_PIPE_SHFT		= 0x8,
++	S_SCMO_CONFIG_INFO_6_ACHAN_INTF_PIPE_BMSK	= 0x10,
++	S_SCMO_CONFIG_INFO_6_ACHAN_INTF_PIPE_SHFT	= 0x4,
++	S_SCMO_CONFIG_INFO_6_ADDR_DECODE_HT_BMSK	= 0x1,
++	S_SCMO_CONFIG_INFO_6_ADDR_DECODE_HT_SHFT	= 0x0,
++};
++
++#define S_SCMO_INT_STATUS_ADDR(b, n) \
++	(S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000100)
++enum bimc_s_scmo_int_status {
++	S_SCMO_INT_STATUS_RMSK			= 0x1,
++	S_SCMO_INT_STATUS_ERR_OCCURED_BMSK	= 0x1,
++	S_SCMO_INT_STATUS_ERR_OCCURED_SHFT	= 0x0,
++};
++
++#define S_SCMO_INT_CLR_ADDR(b, n) \
++	(S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000108)
++enum bimc_s_scmo_int_clr {
++	S_SCMO_INT_CLR_RMSK		= 0x1,
++	S_SCMO_INT_CLR_IRQ_CLR_BMSK	= 0x1,
++	S_SCMO_INT_CLR_IRQ_CLR_SHFT	= 0x0,
++};
++
++#define S_SCMO_INT_EN_ADDR(b, n) \
++	(S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x0000010c)
++enum bimc_s_scmo_int_en {
++	S_SCMO_INT_EN_RMSK		= 0x1,
++	S_SCMO_INT_EN_IRQ_EN_BMSK	= 0x1,
++	S_SCMO_INT_EN_IRQ_EN_SHFT	= 0x0,
++};
++
++#define S_SCMO_ESYN_ADDR_ADDR(b, n) \
++	(S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000120)
++enum bimc_s_scmo_esyn_addr {
++	S_SCMO_ESYN_ADDR_RMSK				= 0xffffffff,
++	S_SCMO_ESYN_ADDR_ESYN_ADDR_ERR_ADDR_BMSK	= 0xffffffff,
++	S_SCMO_ESYN_ADDR_ESYN_ADDR_ERR_ADDR_SHFT	= 0x0,
++};
++
++#define S_SCMO_ESYN_APACKET_0_ADDR(b, n) \
++	(S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000128)
++enum bimc_s_scmo_esyn_apacket_0 {
++	S_SCMO_ESYN_APACKET_0_RMSK			= 0xff1fffff,
++	S_SCMO_ESYN_APACKET_0_ERR_ATID_BMSK		= 0xff000000,
++	S_SCMO_ESYN_APACKET_0_ERR_ATID_SHFT		= 0x18,
++	S_SCMO_ESYN_APACKET_0_ERR_AVMID_BMSK		= 0x1f0000,
++	S_SCMO_ESYN_APACKET_0_ERR_AVMID_SHFT		= 0x10,
++	S_SCMO_ESYN_APACKET_0_ERR_AMID_BMSK		= 0xffff,
++	S_SCMO_ESYN_APACKET_0_ERR_AMID_SHFT		= 0x0,
++};
++
++#define S_SCMO_ESYN_APACKET_1_ADDR(b, n) \
++	(S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x0000012c)
++enum bimc_s_scmo_esyn_apacket_1 {
++	S_SCMO_ESYN_APACKET_1_RMSK			= 0x10ff117,
++	S_SCMO_ESYN_APACKET_1_ERR_CODE_BMSK		= 0x1000000,
++	S_SCMO_ESYN_APACKET_1_ERR_CODE_SHFT		= 0x18,
++	S_SCMO_ESYN_APACKET_1_ERR_ALEN_BMSK		= 0xf0000,
++	S_SCMO_ESYN_APACKET_1_ERR_ALEN_SHFT		= 0x10,
++	S_SCMO_ESYN_APACKET_1_ERR_ASIZE_BMSK		= 0xe000,
++	S_SCMO_ESYN_APACKET_1_ERR_ASIZE_SHFT		= 0xd,
++	S_SCMO_ESYN_APACKET_1_ERR_ABURST_BMSK		= 0x1000,
++	S_SCMO_ESYN_APACKET_1_ERR_ABURST_SHFT		= 0xc,
++	S_SCMO_ESYN_APACKET_1_ERR_AEXCLUSIVE_BMSK	= 0x100,
++	S_SCMO_ESYN_APACKET_1_ERR_AEXCLUSIVE_SHFT	= 0x8,
++	S_SCMO_ESYN_APACKET_1_ERR_APRONTS_BMSK		= 0x10,
++	S_SCMO_ESYN_APACKET_1_ERR_APRONTS_SHFT		= 0x4,
++	S_SCMO_ESYN_APACKET_1_ERR_AOOORD_BMSK		= 0x4,
++	S_SCMO_ESYN_APACKET_1_ERR_AOOORD_SHFT		= 0x2,
++	S_SCMO_ESYN_APACKET_1_ERR_AOOOWR_BMSK		= 0x2,
++	S_SCMO_ESYN_APACKET_1_ERR_AOOOWR_SHFT		= 0x1,
++	S_SCMO_ESYN_APACKET_1_ERR_AWRITE_BMSK		= 0x1,
++	S_SCMO_ESYN_APACKET_1_ERR_AWRITE_SHFT		= 0x0,
++};
++
++#define S_SCMO_CLK_CTRL_ADDR(b, n) \
++	(S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000200)
++enum bimc_s_scmo_clk_ctrl {
++	S_SCMO_CLK_CTRL_RMSK				= 0xffff1111,
++	S_SCMO_CLK_CTRL_PEN_CMD_CG_EN_BMSK		= 0x10000,
++	S_SCMO_CLK_CTRL_PEN_CMD_CG_EN_SHFT		= 0x10,
++	S_SCMO_CLK_CTRL_RCH_CG_EN_BMSK			= 0x1000,
++	S_SCMO_CLK_CTRL_RCH_CG_EN_SHFT			= 0xc,
++	S_SCMO_CLK_CTRL_FLUSH_CG_EN_BMSK		= 0x100,
++	S_SCMO_CLK_CTRL_FLUSH_CG_EN_SHFT		= 0x8,
++	S_SCMO_CLK_CTRL_WCH_CG_EN_BMSK			= 0x10,
++	S_SCMO_CLK_CTRL_WCH_CG_EN_SHFT			= 0x4,
++	S_SCMO_CLK_CTRL_ACH_CG_EN_BMSK			= 0x1,
++	S_SCMO_CLK_CTRL_ACH_CG_EN_SHFT			= 0x0,
++};
++
++#define S_SCMO_SLV_INTERLEAVE_CFG_ADDR(b, n) \
++	(S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000400)
++enum bimc_s_scmo_slv_interleave_cfg {
++	S_SCMO_SLV_INTERLEAVE_CFG_RMSK			= 0xff,
++	S_SCMO_SLV_INTERLEAVE_CFG_INTERLEAVE_CS1_BMSK	= 0x10,
++	S_SCMO_SLV_INTERLEAVE_CFG_INTERLEAVE_CS1_SHFT	= 0x4,
++	S_SCMO_SLV_INTERLEAVE_CFG_INTERLEAVE_CS0_BMSK	= 0x1,
++	S_SCMO_SLV_INTERLEAVE_CFG_INTERLEAVE_CS0_SHFT	= 0x0,
++};
++
++#define S_SCMO_ADDR_BASE_CSn_ADDR(b, n, o)	\
++	(S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000410 + 0x4 * (o))
++enum bimc_s_scmo_addr_base_csn {
++	S_SCMO_ADDR_BASE_CSn_RMSK			= 0xffff,
++	S_SCMO_ADDR_BASE_CSn_MAXn			= 1,
++	S_SCMO_ADDR_BASE_CSn_ADDR_BASE_BMSK		= 0xfc,
++	S_SCMO_ADDR_BASE_CSn_ADDR_BASE_SHFT		= 0x2,
++};
++
++#define S_SCMO_ADDR_MAP_CSn_ADDR(b, n, o) \
++	(S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000420 + 0x4 * (o))
++enum bimc_s_scmo_addr_map_csn {
++	S_SCMO_ADDR_MAP_CSn_RMSK		= 0xffff,
++	S_SCMO_ADDR_MAP_CSn_MAXn		= 1,
++	S_SCMO_ADDR_MAP_CSn_RANK_EN_BMSK	= 0x8000,
++	S_SCMO_ADDR_MAP_CSn_RANK_EN_SHFT	= 0xf,
++	S_SCMO_ADDR_MAP_CSn_ADDR_MODE_BMSK	= 0x1000,
++	S_SCMO_ADDR_MAP_CSn_ADDR_MODE_SHFT	= 0xc,
++	S_SCMO_ADDR_MAP_CSn_BANK_SIZE_BMSK	= 0x100,
++	S_SCMO_ADDR_MAP_CSn_BANK_SIZE_SHFT	= 0x8,
++	S_SCMO_ADDR_MAP_CSn_ROW_SIZE_BMSK	= 0x30,
++	S_SCMO_ADDR_MAP_CSn_ROW_SIZE_SHFT	= 0x4,
++	S_SCMO_ADDR_MAP_CSn_COL_SIZE_BMSK	= 0x3,
++	S_SCMO_ADDR_MAP_CSn_COL_SIZE_SHFT	= 0x0,
++};
++
++#define S_SCMO_ADDR_MASK_CSn_ADDR(b, n, o) \
++	(S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000430 + 0x4 * (0))
++enum bimc_s_scmo_addr_mask_csn {
++	S_SCMO_ADDR_MASK_CSn_RMSK		= 0xffff,
++	S_SCMO_ADDR_MASK_CSn_MAXn		= 1,
++	S_SCMO_ADDR_MASK_CSn_ADDR_MASK_BMSK	= 0xfc,
++	S_SCMO_ADDR_MASK_CSn_ADDR_MASK_SHFT	= 0x2,
++};
++
++#define S_SCMO_SLV_STATUS_ADDR(b, n) \
++	(S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000450)
++enum bimc_s_scmo_slv_status {
++	S_SCMO_SLV_STATUS_RMSK				= 0xff3,
++	S_SCMO_SLV_STATUS_GLOBAL_MONS_IN_USE_BMSK	= 0xff0,
++	S_SCMO_SLV_STATUS_GLOBAL_MONS_IN_USE_SHFT	= 0x4,
++	S_SCMO_SLV_STATUS_SLAVE_IDLE_BMSK		= 0x3,
++	S_SCMO_SLV_STATUS_SLAVE_IDLE_SHFT		= 0x0,
++};
++
++#define S_SCMO_CMD_BUF_CFG_ADDR(b, n) \
++	(S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000500)
++enum bimc_s_scmo_cmd_buf_cfg {
++	S_SCMO_CMD_BUF_CFG_RMSK				= 0xf1f,
++	S_SCMO_CMD_BUF_CFG_CMD_ORDERING_BMSK		= 0x300,
++	S_SCMO_CMD_BUF_CFG_CMD_ORDERING_SHFT		= 0x8,
++	S_SCMO_CMD_BUF_CFG_HP_CMD_AREQPRIO_MAP_BMSK	= 0x10,
++	S_SCMO_CMD_BUF_CFG_HP_CMD_AREQPRIO_MAP_SHFT	= 0x4,
++	S_SCMO_CMD_BUF_CFG_HP_CMD_Q_DEPTH_BMSK		= 0x7,
++	S_SCMO_CMD_BUF_CFG_HP_CMD_Q_DEPTH_SHFT		= 0x0,
++};
++
++#define S_SCM_CMD_BUF_STATUS_ADDR(b, n) \
++	(S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000520)
++enum bimc_s_scm_cmd_buf_status {
++	S_SCMO_CMD_BUF_STATUS_RMSK				= 0x77,
++	S_SCMO_CMD_BUF_STATUS_HP_CMD_BUF_ENTRIES_IN_USE_BMSK	= 0x70,
++	S_SCMO_CMD_BUF_STATUS_HP_CMD_BUF_ENTRIES_IN_USE_SHFT	= 0x4,
++	S_SCMO_CMD_BUF_STATUS_LP_CMD_BUF_ENTRIES_IN_USE_BMSK	= 0x7,
++	S_SCMO_CMD_BUF_STATUS_LP_CMD_BUF_ENTRIES_IN_USE_SHFT	= 0x0,
++};
++
++#define S_SCMO_RCH_SEL_ADDR(b, n) \
++	(S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000540)
++enum bimc_s_scmo_rch_sel {
++	S_SCMO_RCH_SEL_RMSK			= 0xffffffff,
++	S_SCMO_CMD_BUF_STATUS_RCH_PORTS_BMSK	= 0xffffffff,
++	S_SCMO_CMD_BUF_STATUS_RCH_PORTS_SHFT	= 0x0,
++};
++
++#define S_SCMO_RCH_BKPR_CFG_ADDR(b, n) \
++		(S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000544)
++enum bimc_s_scmo_rch_bkpr_cfg {
++	S_SCMO_RCH_BKPR_CFG_RMSK			= 0xffffffff,
++	S_SCMO_RCH_BKPR_CFG_RCH1_FIFO_BKPR_HI_TH_BMSK	= 0x3f000000,
++	S_SCMO_RCH_BKPR_CFG_RCH1_FIFO_BKPR_HI_TH_SHFT	= 0x18,
++	S_SCMO_RCH_BKPR_CFG_RCH1_FIFO_BKPR_LO_TH_BMSK	= 0x3f0000,
++	S_SCMO_RCH_BKPR_CFG_RCH1_FIFO_BKPR_LO_TH_SHFT	= 0x10,
++	S_SCMO_RCH_BKPR_CFG_RCH0_FIFO_BKPR_HI_TH_BMSK	= 0x3f00,
++	S_SCMO_RCH_BKPR_CFG_RCH0_FIFO_BKPR_HI_TH_SHFT	= 0x8,
++	S_SCMO_RCH_BKPR_CFG_RCH0_FIFO_BKPR_LO_TH_BMSK	= 0x3f,
++	S_SCMO_RCH_BKPR_CFG_RCH0_FIFO_BKPR_LO_TH_SHFT	= 0x0,
++};
++
++#define S_SCMO_RCH_STATUS_ADDR(b, n) \
++		(S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000560)
++enum bimc_s_scmo_rch_status {
++	S_SCMO_RCH_STATUS_RMSK				= 0x33333,
++	S_SCMO_RCH_STATUS_PRQ_FIFO_FULL_BMSK		= 0x20000,
++	S_SCMO_RCH_STATUS_PRQ_FIFO_FULL_SHFT		= 0x11,
++	S_SCMO_RCH_STATUS_PRQ_FIFO_EMPTY_BMSK		= 0x10000,
++	S_SCMO_RCH_STATUS_PRQ_FIFO_EMPTY_SHFT		= 0x10,
++	S_SCMO_RCH_STATUS_RCH1_QUAL_FIFO_FULL_BMSK	= 0x2000,
++	S_SCMO_RCH_STATUS_RCH1_QUAL_FIFO_FULL_SHFT	= 0xd,
++	S_SCMO_RCH_STATUS_RCH1_QUAL_FIFO_EMPTY_BMSK	= 0x1000,
++	S_SCMO_RCH_STATUS_RCH1_QUAL_FIFO_EMPTY_SHFT	= 0xc,
++	S_SCMO_RCH_STATUS_RCH1_DATA_FIFO_FULL_BMSK	= 0x200,
++	S_SCMO_RCH_STATUS_RCH1_DATA_FIFO_FULL_SHFT	= 0x9,
++	S_SCMO_RCH_STATUS_RCH1_DATA_FIFO_EMPTY_BMSK	= 0x100,
++	S_SCMO_RCH_STATUS_RCH1_DATA_FIFO_EMPTY_SHFT	= 0x8,
++	S_SCMO_RCH_STATUS_RCH0_QUAL_FIFO_FULL_BMSK	= 0x20,
++	S_SCMO_RCH_STATUS_RCH0_QUAL_FIFO_FULL_SHFT	= 0x5,
++	S_SCMO_RCH_STATUS_RCH0_QUAL_FIFO_EMPTY_BMSK	= 0x10,
++	S_SCMO_RCH_STATUS_RCH0_QUAL_FIFO_EMPTY_SHFT	= 0x4,
++	S_SCMO_RCH_STATUS_RCH0_DATA_FIFO_FULL_BMSK	= 0x2,
++	S_SCMO_RCH_STATUS_RCH0_DATA_FIFO_FULL_SHFT	= 0x1,
++	S_SCMO_RCH_STATUS_RCH0_DATA_FIFO_EMPTY_BMSK	= 0x1,
++	S_SCMO_RCH_STATUS_RCH0_DATA_FIFO_EMPTY_SHFT	= 0x0,
++};
++
++#define S_SCMO_WCH_BUF_CFG_ADDR(b, n) \
++	(S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000580)
++enum bimc_s_scmo_wch_buf_cfg {
++	S_SCMO_WCH_BUF_CFG_RMSK				= 0xff,
++	S_SCMO_WCH_BUF_CFG_WRITE_BLOCK_READ_BMSK	= 0x10,
++	S_SCMO_WCH_BUF_CFG_WRITE_BLOCK_READ_SHFT	= 0x4,
++	S_SCMO_WCH_BUF_CFG_COALESCE_EN_BMSK		= 0x1,
++	S_SCMO_WCH_BUF_CFG_COALESCE_EN_SHFT		= 0x0,
++};
++
++#define S_SCMO_WCH_STATUS_ADDR(b, n) \
++	(S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x000005a0)
++enum bimc_s_scmo_wch_status {
++	S_SCMO_WCH_STATUS_RMSK				= 0x333,
++	S_SCMO_WCH_STATUS_BRESP_FIFO_FULL_BMSK		= 0x200,
++	S_SCMO_WCH_STATUS_BRESP_FIFO_FULL_SHFT		= 0x9,
++	S_SCMO_WCH_STATUS_BRESP_FIFO_EMPTY_BMSK		= 0x100,
++	S_SCMO_WCH_STATUS_BRESP_FIFO_EMPTY_SHFT		= 0x8,
++	S_SCMO_WCH_STATUS_WDATA_FIFO_FULL_BMSK		= 0x20,
++	S_SCMO_WCH_STATUS_WDATA_FIFO_FULL_SHFT		= 0x5,
++	S_SCMO_WCH_STATUS_WDATA_FIFO_EMPTY_BMSK		= 0x10,
++	S_SCMO_WCH_STATUS_WDATA_FIFO_EMPTY_SHFT		= 0x4,
++	S_SCMO_WCH_STATUS_WBUF_FULL_BMSK		= 0x2,
++	S_SCMO_WCH_STATUS_WBUF_FULL_SHFT		= 0x1,
++	S_SCMO_WCH_STATUS_WBUF_EMPTY_BMSK		= 0x1,
++	S_SCMO_WCH_STATUS_WBUF_EMPTY_SHFT		= 0x0,
++};
++
++#define S_SCMO_FLUSH_CFG_ADDR(b, n) \
++	(S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x000005c0)
++enum bimc_s_scmo_flush_cfg {
++	S_SCMO_FLUSH_CFG_RMSK				= 0xffffffff,
++	S_SCMO_FLUSH_CFG_FLUSH_IN_ORDER_BMSK		= 0x10000000,
++	S_SCMO_FLUSH_CFG_FLUSH_IN_ORDER_SHFT		= 0x1c,
++	S_SCMO_FLUSH_CFG_FLUSH_IDLE_DELAY_BMSK		= 0x3ff0000,
++	S_SCMO_FLUSH_CFG_FLUSH_IDLE_DELAY_SHFT		= 0x10,
++	S_SCMO_FLUSH_CFG_FLUSH_UPPER_LIMIT_BMSK		= 0xf00,
++	S_SCMO_FLUSH_CFG_FLUSH_UPPER_LIMIT_SHFT		= 0x8,
++	S_SCMO_FLUSH_CFG_FLUSH_LOWER_LIMIT_BMSK		= 0xf,
++	S_SCMO_FLUSH_CFG_FLUSH_LOWER_LIMIT_SHFT		= 0x0,
++};
++
++#define S_SCMO_FLUSH_CMD_ADDR(b, n) \
++	(S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x000005c4)
++enum bimc_s_scmo_flush_cmd {
++	S_SCMO_FLUSH_CMD_RMSK				= 0xf,
++	S_SCMO_FLUSH_CMD_FLUSH_ALL_BUF_BMSK		= 0x3,
++	S_SCMO_FLUSH_CMD_FLUSH_ALL_BUF_SHFT		= 0x0,
++};
++
++#define S_SCMO_CMD_OPT_CFG0_ADDR(b, n) \
++	(S_SCM0_REG_BASE(b) + (0x8000 * (n)) + 0x00000700)
++enum bimc_s_scmo_cmd_opt_cfg0 {
++	S_SCMO_CMD_OPT_CFG0_RMSK		= 0xffffff,
++	S_SCMO_CMD_OPT_CFG0_IGNORE_BANK_UNAVL_BMSK	= 0x100000,
++	S_SCMO_CMD_OPT_CFG0_IGNORE_BANK_UNAVL_SHFT	= 0x14,
++	S_SCMO_CMD_OPT_CFG0_MASK_CMDOUT_PRI_BMSK	= 0x10000,
++	S_SCMO_CMD_OPT_CFG0_MASK_CMDOUT_PRI_SHFT	= 0x10,
++	S_SCMO_CMD_OPT_CFG0_DPE_CMD_REORDERING_BMSK	= 0x1000,
++	S_SCMO_CMD_OPT_CFG0_DPE_CMD_REORDERING_SHFT	= 0xc,
++	S_SCMO_CMD_OPT_CFG0_WR_OPT_EN_BMSK		= 0x100,
++	S_SCMO_CMD_OPT_CFG0_WR_OPT_EN_SHFT		= 0x8,
++	S_SCMO_CMD_OPT_CFG0_RD_OPT_EN_BMSK		= 0x10,
++	S_SCMO_CMD_OPT_CFG0_RD_OPT_EN_SHFT		= 0x4,
++	S_SCMO_CMD_OPT_CFG0_PAGE_MGMT_POLICY_BMSK	= 0x1,
++	S_SCMO_CMD_OPT_CFG0_PAGE_MGMT_POLICY_SHFT	= 0x0,
++};
++
++#define S_SCMO_CMD_OPT_CFG1_ADDR(b, n) \
++	(S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000704)
++enum bimc_s_scmo_cmd_opt_cfg1 {
++	S_SCMO_CMD_OPT_CFG1_RMSK			= 0xffffffff,
++	S_SCMO_CMD_OPT_CFG1_HSTP_CMD_TIMEOUT_BMSK	= 0x1f000000,
++	S_SCMO_CMD_OPT_CFG1_HSTP_CMD_TIMEOUT_SHFT	= 0x18,
++	S_SCMO_CMD_OPT_CFG1_HP_CMD_TIMEOUT_BMSK		= 0x1f0000,
++	S_SCMO_CMD_OPT_CFG1_HP_CMD_TIMEOUT_SHFT		= 0x10,
++	S_SCMO_CMD_OPT_CFG1_MP_CMD_TIMEOUT_BMSK		= 0x1f00,
++	S_SCMO_CMD_OPT_CFG1_MP_CMD_TIMEOUT_SHFT		= 0x8,
++	S_SCMO_CMD_OPT_CFG1_LP_CMD_TIMEOUT_BMSK		= 0x1f,
++	S_SCMO_CMD_OPT_CFG1_LP_CMD_TIMEOUT_SHFT		= 0x0,
++};
++
++#define S_SCMO_CMD_OPT_CFG2_ADDR(b, n) \
++	(S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000708)
++enum bimc_s_scmo_cmd_opt_cfg2 {
++	S_SCMO_CMD_OPT_CFG2_RMSK			= 0xff,
++	S_SCMO_CMD_OPT_CFG2_RWOPT_CMD_TIMEOUT_BMSK	= 0xf,
++	S_SCMO_CMD_OPT_CFG2_RWOPT_CMD_TIMEOUT_SHFT	= 0x0,
++};
++
++#define S_SCMO_CMD_OPT_CFG3_ADDR(b, n) \
++	(S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x0000070c)
++enum bimc_s_scmo_cmd_opt_cfg3 {
++	S_SCMO_CMD_OPT_CFG3_RMSK			= 0xff,
++	S_SCMO_CMD_OPT_CFG3_FLUSH_CMD_TIMEOUT_BMSK	= 0xf,
++	S_SCMO_CMD_OPT_CFG3_FLUSH_CMD_TIMEOUT_SHFT	= 0x0,
++};
++
++/* S_SWAY_GENERIC */
++#define S_SWAY_REG_BASE(b)	((b) + 0x00048000)
++
++#define S_SWAY_CONFIG_INFO_0_ADDR(b, n) \
++	(S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000020)
++enum bimc_s_sway_config_info_0 {
++	S_SWAY_CONFIG_INFO_0_RMSK		= 0xff0000ff,
++	S_SWAY_CONFIG_INFO_0_SYNC_MODE_BMSK	= 0xff000000,
++	S_SWAY_CONFIG_INFO_0_SYNC_MODE_SHFT	= 0x18,
++	S_SWAY_CONFIG_INFO_0_FUNC_BMSK		= 0xff,
++	S_SWAY_CONFIG_INFO_0_FUNC_SHFT		= 0x0,
++};
++
++#define S_SWAY_CONFIG_INFO_1_ADDR(b, n) \
++	(S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000030)
++enum bimc_s_sway_config_info_1 {
++	S_SWAY_CONFIG_INFO_1_RMSK			= 0xffffffff,
++	S_SWAY_CONFIG_INFO_1_MPORT_CONNECTIVITY_BMSK	= 0xffffffff,
++	S_SWAY_CONFIG_INFO_1_MPORT_CONNECTIVITY_SHFT	= 0x0,
++};
++
++#define S_SWAY_CONFIG_INFO_2_ADDR(b, n) \
++	(S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000040)
++enum bimc_s_sway_config_info_2 {
++	S_SWAY_CONFIG_INFO_2_RMSK			= 0xffff0000,
++	S_SWAY_CONFIG_INFO_2_MPORT_CONNECTIVITY_BMSK	= 0xffff0000,
++	S_SWAY_CONFIG_INFO_2_MPORT_CONNECTIVITY_SHFT	= 0x10,
++};
++
++#define S_SWAY_CONFIG_INFO_3_ADDR(b, n) \
++	(S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000050)
++enum bimc_s_sway_config_info_3 {
++	S_SWAY_CONFIG_INFO_3_RMSK			= 0xffffffff,
++	S_SWAY_CONFIG_INFO_3_RCH0_DEPTH_BMSK		= 0xff000000,
++	S_SWAY_CONFIG_INFO_3_RCH0_DEPTH_SHFT		= 0x18,
++	S_SWAY_CONFIG_INFO_3_BCH_DEPTH_BMSK		= 0xff0000,
++	S_SWAY_CONFIG_INFO_3_BCH_DEPTH_SHFT		= 0x10,
++	S_SWAY_CONFIG_INFO_3_WCH_DEPTH_BMSK		= 0xff,
++	S_SWAY_CONFIG_INFO_3_WCH_DEPTH_SHFT		= 0x0,
++};
++
++#define S_SWAY_CONFIG_INFO_4_ADDR(b, n) \
++	(S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000060)
++enum bimc_s_sway_config_info_4 {
++	S_SWAY_CONFIG_INFO_4_RMSK			= 0x800000ff,
++	S_SWAY_CONFIG_INFO_4_DUAL_RCH_EN_BMSK		= 0x80000000,
++	S_SWAY_CONFIG_INFO_4_DUAL_RCH_EN_SHFT		= 0x1f,
++	S_SWAY_CONFIG_INFO_4_RCH1_DEPTH_BMSK		= 0xff,
++	S_SWAY_CONFIG_INFO_4_RCH1_DEPTH_SHFT		= 0x0,
++};
++
++#define S_SWAY_CONFIG_INFO_5_ADDR(b, n) \
++	(S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000070)
++enum bimc_s_sway_config_info_5 {
++	S_SWAY_CONFIG_INFO_5_RMSK			= 0x800000ff,
++	S_SWAY_CONFIG_INFO_5_QCH_EN_BMSK		= 0x80000000,
++	S_SWAY_CONFIG_INFO_5_QCH_EN_SHFT		= 0x1f,
++	S_SWAY_CONFIG_INFO_5_QCH_DEPTH_BMSK		= 0xff,
++	S_SWAY_CONFIG_INFO_5_QCH_DEPTH_SHFT		= 0x0,
++};
++
++#define S_SWAY_CONFIG_INFO_6_ADDR(b, n) \
++	(S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000080)
++enum bimc_s_sway_config_info_6 {
++	S_SWAY_CONFIG_INFO_6_RMSK			= 0x1,
++	S_SWAY_CONFIG_INFO_6_S2SW_PIPELINE_EN_BMSK	= 0x1,
++	S_SWAY_CONFIG_INFO_6_S2SW_PIPELINE_EN_SHFT	= 0x0,
++};
++
++#define S_SWAY_INT_STATUS_ADDR(b, n) \
++	(S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000100)
++enum bimc_s_sway_int_status {
++	S_SWAY_INT_STATUS_RMSK		= 0x3,
++	S_SWAY_INT_STATUS_RFU_BMSK	= 0x3,
++	S_SWAY_INT_STATUS_RFU_SHFT	= 0x0,
++};
++
++#define S_SWAY_INT_CLR_ADDR(b, n) \
++	(S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000108)
++enum bimc_s_sway_int_clr {
++	S_SWAY_INT_CLR_RMSK		= 0x3,
++	S_SWAY_INT_CLR_RFU_BMSK		= 0x3,
++	S_SWAY_INT_CLR_RFU_SHFT		= 0x0,
++};
++
++
++#define S_SWAY_INT_EN_ADDR(b, n) \
++	(S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x0000010c)
++enum bimc_s_sway_int_en {
++	S_SWAY_INT_EN_RMSK		= 0x3,
++	S_SWAY_INT_EN_RFU_BMSK		= 0x3,
++	S_SWAY_INT_EN_RFU_SHFT		= 0x0,
++};
++
++#define S_SWAY_CLK_CTRL_ADDR(b, n) \
++	(S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000200)
++enum bimc_s_sway_clk_ctrl {
++	S_SWAY_CLK_CTRL_RMSK				= 0x3,
++	S_SWAY_CLK_CTRL_SLAVE_CLK_GATING_EN_BMSK	= 0x2,
++	S_SWAY_CLK_CTRL_SLAVE_CLK_GATING_EN_SHFT	= 0x1,
++	S_SWAY_CLK_CTRL_CORE_CLK_GATING_EN_BMSK		= 0x1,
++	S_SWAY_CLK_CTRL_CORE_CLK_GATING_EN_SHFT		= 0x0,
++};
++
++#define S_SWAY_RCH_SEL_ADDR(b, n) \
++	(S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000210)
++enum bimc_s_sway_rch_sel {
++	S_SWAY_RCH_SEL_RMSK		= 0x7f,
++	S_SWAY_RCH_SEL_UNUSED_BMSK	= 0x7f,
++	S_SWAY_RCH_SEL_UNUSED_SHFT	= 0x0,
++};
++
++
++#define S_SWAY_MAX_OUTSTANDING_REQS_ADDR(b, n) \
++	(S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000220)
++enum bimc_s_sway_max_outstanding_reqs {
++	S_SWAY_MAX_OUTSTANDING_REQS_RMSK	= 0xffff,
++	S_SWAY_MAX_OUTSTANDING_REQS_WRITE_BMSK	= 0xff00,
++	S_SWAY_MAX_OUTSTANDING_REQS_WRITE_SHFT	= 0x8,
++	S_SWAY_MAX_OUTSTANDING_REQS_READ_BMSK	= 0xff,
++	S_SWAY_MAX_OUTSTANDING_REQS_READ_SHFT	= 0x0,
++};
++
++
++#define S_SWAY_BUF_STATUS_0_ADDR(b, n) \
++	(S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000400)
++enum bimc_s_sway_buf_status_0 {
++	S_SWAY_BUF_STATUS_0_RMSK			= 0xf0300f03,
++	S_SWAY_BUF_STATUS_0_RCH0_DATA_RD_FULL_BMSK	= 0x80000000,
++	S_SWAY_BUF_STATUS_0_RCH0_DATA_RD_FULL_SHFT	= 0x1f,
++	S_SWAY_BUF_STATUS_0_RCH0_DATA_RD_EMPTY_BMSK	= 0x40000000,
++	S_SWAY_BUF_STATUS_0_RCH0_DATA_RD_EMPTY_SHFT	= 0x1e,
++	S_SWAY_BUF_STATUS_0_RCH0_CTRL_RD_FULL_BMSK	= 0x20000000,
++	S_SWAY_BUF_STATUS_0_RCH0_CTRL_RD_FULL_SHFT	= 0x1d,
++	S_SWAY_BUF_STATUS_0_RCH0_CTRL_RD_EMPTY_BMSK	= 0x10000000,
++	S_SWAY_BUF_STATUS_0_RCH0_CTRL_RD_EMPTY_SHFT	= 0x1c,
++	S_SWAY_BUF_STATUS_0_BCH_RD_FULL_BMSK		= 0x200000,
++	S_SWAY_BUF_STATUS_0_BCH_RD_FULL_SHFT		= 0x15,
++	S_SWAY_BUF_STATUS_0_BCH_RD_EMPTY_BMSK		= 0x100000,
++	S_SWAY_BUF_STATUS_0_BCH_RD_EMPTY_SHFT		= 0x14,
++	S_SWAY_BUF_STATUS_0_WCH_DATA_WR_FULL_BMSK	= 0x800,
++	S_SWAY_BUF_STATUS_0_WCH_DATA_WR_FULL_SHFT	= 0xb,
++	S_SWAY_BUF_STATUS_0_WCH_DATA_WR_EMPTY_BMSK	= 0x400,
++	S_SWAY_BUF_STATUS_0_WCH_DATA_WR_EMPTY_SHFT	= 0xa,
++	S_SWAY_BUF_STATUS_0_WCH_CTRL_WR_FULL_BMSK	= 0x200,
++	S_SWAY_BUF_STATUS_0_WCH_CTRL_WR_FULL_SHFT	= 0x9,
++	S_SWAY_BUF_STATUS_0_WCH_CTRL_WR_EMPTY_BMSK	= 0x100,
++	S_SWAY_BUF_STATUS_0_WCH_CTRL_WR_EMPTY_SHFT	= 0x8,
++	S_SWAY_BUF_STATUS_0_ACH_WR_FULL_BMSK		= 0x2,
++	S_SWAY_BUF_STATUS_0_ACH_WR_FULL_SHFT		= 0x1,
++	S_SWAY_BUF_STATUS_0_ACH_WR_EMPTY_BMSK		= 0x1,
++	S_SWAY_BUF_STATUS_0_ACH_WR_EMPTY_SHFT		= 0x0,
++};
++
++#define S_SWAY_BUF_STATUS_1_ADDR(b, n) \
++	(S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000410)
++enum bimc_s_sway_buf_status_1 {
++	S_SWAY_BUF_STATUS_1_RMSK			= 0xf0,
++	S_SWAY_BUF_STATUS_1_RCH1_DATA_RD_FULL_BMSK	= 0x80,
++	S_SWAY_BUF_STATUS_1_RCH1_DATA_RD_FULL_SHFT	= 0x7,
++	S_SWAY_BUF_STATUS_1_RCH1_DATA_RD_EMPTY_BMSK	= 0x40,
++	S_SWAY_BUF_STATUS_1_RCH1_DATA_RD_EMPTY_SHFT	= 0x6,
++	S_SWAY_BUF_STATUS_1_RCH1_CTRL_RD_FULL_BMSK	= 0x20,
++	S_SWAY_BUF_STATUS_1_RCH1_CTRL_RD_FULL_SHFT	= 0x5,
++	S_SWAY_BUF_STATUS_1_RCH1_CTRL_RD_EMPTY_BMSK	= 0x10,
++	S_SWAY_BUF_STATUS_1_RCH1_CTRL_RD_EMPTY_SHFT	= 0x4,
++};
++
++#define S_SWAY_BUF_STATUS_2_ADDR(b, n) \
++	(S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000420)
++enum bimc_s_sway_buf_status_2 {
++	S_SWAY_BUF_STATUS_2_RMSK		= 0x30,
++	S_SWAY_BUF_STATUS_2_QCH_RD_FULL_BMSK	= 0x20,
++	S_SWAY_BUF_STATUS_2_QCH_RD_FULL_SHFT	= 0x5,
++	S_SWAY_BUF_STATUS_2_QCH_RD_EMPTY_BMSK	= 0x10,
++	S_SWAY_BUF_STATUS_2_QCH_RD_EMPTY_SHFT	= 0x4,
++};
++
++/* S_ARB_GENERIC */
++
++#define S_ARB_REG_BASE(b)	((b) + 0x00049000)
++
++#define S_ARB_COMPONENT_INFO_ADDR(b, n) \
++	(S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000000)
++enum bimc_s_arb_component_info {
++	S_ARB_COMPONENT_INFO_RMSK		= 0xffffff,
++	S_ARB_COMPONENT_INFO_INSTANCE_BMSK	= 0xff0000,
++	S_ARB_COMPONENT_INFO_INSTANCE_SHFT	= 0x10,
++	S_ARB_COMPONENT_INFO_SUB_TYPE_BMSK	= 0xff00,
++	S_ARB_COMPONENT_INFO_SUB_TYPE_SHFT	= 0x8,
++	S_ARB_COMPONENT_INFO_TYPE_BMSK		= 0xff,
++	S_ARB_COMPONENT_INFO_TYPE_SHFT		= 0x0,
++};
++
++#define S_ARB_CONFIG_INFO_0_ADDR(b, n) \
++		(S_ARB_REG_BASE(b) + (0x8000 * (n)) + 0x00000020)
++enum bimc_s_arb_config_info_0 {
++	S_ARB_CONFIG_INFO_0_RMSK			= 0x800000ff,
++	S_ARB_CONFIG_INFO_0_ARB2SW_PIPELINE_EN_BMSK	= 0x80000000,
++	S_ARB_CONFIG_INFO_0_ARB2SW_PIPELINE_EN_SHFT	= 0x1f,
++	S_ARB_CONFIG_INFO_0_FUNC_BMSK			= 0xff,
++	S_ARB_CONFIG_INFO_0_FUNC_SHFT			= 0x0,
++};
++
++#define S_ARB_CONFIG_INFO_1_ADDR(b, n) \
++		(S_ARB_REG_BASE(b) + (0x8000 * (n)) + 0x00000030)
++enum bimc_s_arb_config_info_1 {
++	S_ARB_CONFIG_INFO_1_RMSK			= 0xffffffff,
++	S_ARB_CONFIG_INFO_1_MPORT_CONNECTIVITY_BMSK	= 0xffffffff,
++	S_ARB_CONFIG_INFO_1_MPORT_CONNECTIVITY_SHFT	= 0x0,
++};
++
++#define S_ARB_CLK_CTRL_ADDR(b) \
++	(S_ARB_REG_BASE(b) + (0x8000 * (n)) + 0x00000200)
++enum bimc_s_arb_clk_ctrl {
++	S_ARB_CLK_CTRL_RMSK				= 0x1,
++	S_ARB_CLK_CTRL_SLAVE_CLK_GATING_EN_BMSK		= 0x2,
++	S_ARB_CLK_CTRL_SLAVE_CLK_GATING_EN_SHFT		= 0x1,
++	S_ARB_CLK_CTRL_CORE_CLK_GATING_EN_BMSK		= 0x1,
++	S_ARB_CLK_CTRL_CORE_CLK_GATING_EN_SHFT		= 0x0,
++	S_ARB_CLK_CTRL_CLK_GATING_EN_BMSK		= 0x1,
++	S_ARB_CLK_CTRL_CLK_GATING_EN_SHFT		= 0x0,
++};
++
++#define S_ARB_MODE_ADDR(b, n) \
++	(S_ARB_REG_BASE(b) + (0x8000 * (n)) + 0x00000210)
++enum bimc_s_arb_mode {
++	S_ARB_MODE_RMSK				= 0xf0000001,
++	S_ARB_MODE_WR_GRANTS_AHEAD_BMSK		= 0xf0000000,
++	S_ARB_MODE_WR_GRANTS_AHEAD_SHFT		= 0x1c,
++	S_ARB_MODE_PRIO_RR_EN_BMSK		= 0x1,
++	S_ARB_MODE_PRIO_RR_EN_SHFT		= 0x0,
++};
++
++#define BKE_HEALTH_MASK \
++	(M_BKE_HEALTH_0_CONFIG_LIMIT_CMDS_BMSK |\
++	M_BKE_HEALTH_0_CONFIG_AREQPRIO_BMSK |\
++	M_BKE_HEALTH_0_CONFIG_PRIOLVL_BMSK)
++
++#define BKE_HEALTH_VAL(limit, areq, plvl) \
++	((((limit) << M_BKE_HEALTH_0_CONFIG_LIMIT_CMDS_SHFT) & \
++	M_BKE_HEALTH_0_CONFIG_LIMIT_CMDS_BMSK) | \
++	(((areq) << M_BKE_HEALTH_0_CONFIG_AREQPRIO_SHFT) & \
++	M_BKE_HEALTH_0_CONFIG_AREQPRIO_BMSK) | \
++	(((plvl) << M_BKE_HEALTH_0_CONFIG_PRIOLVL_SHFT) & \
++	M_BKE_HEALTH_0_CONFIG_PRIOLVL_BMSK))
++
++#define MAX_GRANT_PERIOD \
++	(M_BKE_GP_GP_BMSK >> \
++	M_BKE_GP_GP_SHFT)
++
++#define MAX_GC \
++	(M_BKE_GC_GC_BMSK >> \
++	(M_BKE_GC_GC_SHFT + 1))
++
++static int bimc_div(int64_t *a, uint32_t b)
++{
++	if ((*a > 0) && (*a < b)) {
++		*a = 0;
++		return 1;
++	} else {
++		return do_div(*a, b);
++	}
++}
++
++#define ENABLE(val) ((val) == 1 ? 1 : 0)
++void msm_bus_bimc_set_mas_clk_gate(struct msm_bus_bimc_info *binfo,
++	uint32_t mas_index, struct msm_bus_bimc_clk_gate *bgate)
++{
++	uint32_t val, mask, reg_val;
++	void __iomem *addr;
++
++	reg_val = readl_relaxed(M_CLK_CTRL_ADDR(binfo->base,
++			mas_index)) & M_CLK_CTRL_RMSK;
++	addr = M_CLK_CTRL_ADDR(binfo->base, mas_index);
++	mask = (M_CLK_CTRL_MAS_CLK_GATING_EN_BMSK |
++		M_CLK_CTRL_CORE_CLK_GATING_EN_BMSK);
++	val = (bgate->core_clk_gate_en <<
++		M_CLK_CTRL_MAS_CLK_GATING_EN_SHFT) |
++		bgate->port_clk_gate_en;
++	writel_relaxed(((reg_val & (~mask)) | (val & mask)), addr);
++	/* Ensure clock gating enable mask is set before exiting */
++	wmb();
++}
++
++void msm_bus_bimc_arb_en(struct msm_bus_bimc_info *binfo,
++	uint32_t slv_index, bool en)
++{
++	uint32_t reg_val, reg_mask_val, enable, val;
++
++	reg_mask_val = (readl_relaxed(S_ARB_CONFIG_INFO_0_ADDR(binfo->
++		base, slv_index)) & S_ARB_CONFIG_INFO_0_FUNC_BMSK)
++		>> S_ARB_CONFIG_INFO_0_FUNC_SHFT;
++	enable = ENABLE(en);
++	val = enable << S_ARB_MODE_PRIO_RR_EN_SHFT;
++	if (reg_mask_val == BIMC_ARB_MODE_PRIORITY_RR) {
++		reg_val = readl_relaxed(S_ARB_CONFIG_INFO_0_ADDR(binfo->
++			base, slv_index)) & S_ARB_MODE_RMSK;
++		writel_relaxed(((reg_val & (~(S_ARB_MODE_PRIO_RR_EN_BMSK))) |
++			(val & S_ARB_MODE_PRIO_RR_EN_BMSK)),
++			S_ARB_MODE_ADDR(binfo->base, slv_index));
++		/* Ensure arbitration mode is set before returning */
++		wmb();
++	}
++}
++
++static void set_qos_mode(void __iomem *baddr, uint32_t index, uint32_t val0,
++	uint32_t val1, uint32_t val2)
++{
++	uint32_t reg_val, val;
++
++	reg_val = readl_relaxed(M_PRIOLVL_OVERRIDE_ADDR(baddr,
++		index)) & M_PRIOLVL_OVERRIDE_RMSK;
++	val = val0 << M_PRIOLVL_OVERRIDE_OVERRIDE_PRIOLVL_SHFT;
++	writel_relaxed(((reg_val & ~(M_PRIOLVL_OVERRIDE_OVERRIDE_PRIOLVL_BMSK))
++		| (val & M_PRIOLVL_OVERRIDE_OVERRIDE_PRIOLVL_BMSK)),
++		M_PRIOLVL_OVERRIDE_ADDR(baddr, index));
++	reg_val = readl_relaxed(M_RD_CMD_OVERRIDE_ADDR(baddr, index)) &
++		M_RD_CMD_OVERRIDE_RMSK;
++	val = val1 << M_RD_CMD_OVERRIDE_OVERRIDE_AREQPRIO_SHFT;
++	writel_relaxed(((reg_val & ~(M_RD_CMD_OVERRIDE_OVERRIDE_AREQPRIO_BMSK
++		)) | (val & M_RD_CMD_OVERRIDE_OVERRIDE_AREQPRIO_BMSK)),
++		M_RD_CMD_OVERRIDE_ADDR(baddr, index));
++	reg_val = readl_relaxed(M_WR_CMD_OVERRIDE_ADDR(baddr, index)) &
++		M_WR_CMD_OVERRIDE_RMSK;
++	val = val2 << M_WR_CMD_OVERRIDE_OVERRIDE_AREQPRIO_SHFT;
++	writel_relaxed(((reg_val & ~(M_WR_CMD_OVERRIDE_OVERRIDE_AREQPRIO_BMSK
++		)) | (val & M_WR_CMD_OVERRIDE_OVERRIDE_AREQPRIO_BMSK)),
++		M_WR_CMD_OVERRIDE_ADDR(baddr, index));
++	/* Ensure the priority register writes go through */
++	wmb();
++}
++
++static void msm_bus_bimc_set_qos_mode(void __iomem *base,
++	uint32_t mas_index, uint8_t qmode_sel)
++{
++	uint32_t reg_val, val;
++
++	switch (qmode_sel) {
++	case BIMC_QOS_MODE_FIXED:
++		reg_val = readl_relaxed(M_BKE_EN_ADDR(base,
++			mas_index));
++		writel_relaxed((reg_val & (~M_BKE_EN_EN_BMSK)),
++			M_BKE_EN_ADDR(base, mas_index));
++		/* Ensure that the book-keeping register writes
++		 * go through before setting QoS mode.
++		 * QoS mode registers might write beyond 1K
++		 * boundary in future
++		 */
++		wmb();
++		set_qos_mode(base, mas_index, 1, 1, 1);
++		break;
++
++	case BIMC_QOS_MODE_BYPASS:
++		reg_val = readl_relaxed(M_BKE_EN_ADDR(base,
++			mas_index));
++		writel_relaxed((reg_val & (~M_BKE_EN_EN_BMSK)),
++			M_BKE_EN_ADDR(base, mas_index));
++		/* Ensure that the book-keeping register writes
++		 * go through before setting QoS mode.
++		 * QoS mode registers might write beyond 1K
++		 * boundary in future
++		 */
++		wmb();
++		set_qos_mode(base, mas_index, 0, 0, 0);
++		break;
++
++	case BIMC_QOS_MODE_REGULATOR:
++	case BIMC_QOS_MODE_LIMITER:
++		set_qos_mode(base, mas_index, 0, 0, 0);
++		reg_val = readl_relaxed(M_BKE_EN_ADDR(base,
++			mas_index));
++		val = 1 << M_BKE_EN_EN_SHFT;
++		/* Ensure that the book-keeping register writes
++		 * go through before setting QoS mode.
++		 * QoS mode registers might write beyond 1K
++		 * boundary in future
++		 */
++		wmb();
++		writel_relaxed(((reg_val & (~M_BKE_EN_EN_BMSK)) | (val &
++			M_BKE_EN_EN_BMSK)), M_BKE_EN_ADDR(base,
++			mas_index));
++		break;
++	default:
++		break;
++	}
++}
++
++static void set_qos_prio_rl(void __iomem *addr, uint32_t rmsk,
++	uint8_t index, struct msm_bus_bimc_qos_mode *qmode)
++{
++	uint32_t reg_val, val0, val;
++
++	/* Note, addr is already passed with right mas_index */
++	reg_val = readl_relaxed(addr) & rmsk;
++	val0 = BKE_HEALTH_VAL(qmode->rl.qhealth[index].limit_commands,
++		qmode->rl.qhealth[index].areq_prio,
++		qmode->rl.qhealth[index].prio_level);
++	val = ((reg_val & (~(BKE_HEALTH_MASK))) | (val0 & BKE_HEALTH_MASK));
++	writel_relaxed(val, addr);
++	/* Ensure that priority for regulator/limiter modes are
++	 * set before returning
++	 */
++	wmb();
++
++}
++
++static void msm_bus_bimc_set_qos_prio(void __iomem *base,
++	uint32_t mas_index, uint8_t qmode_sel,
++	struct msm_bus_bimc_qos_mode *qmode)
++{
++	uint32_t reg_val, val;
++
++	switch (qmode_sel) {
++	case BIMC_QOS_MODE_FIXED:
++		reg_val = readl_relaxed(M_PRIOLVL_OVERRIDE_ADDR(
++			base, mas_index)) & M_PRIOLVL_OVERRIDE_RMSK;
++		val =  qmode->fixed.prio_level <<
++			M_PRIOLVL_OVERRIDE_SHFT;
++		writel_relaxed(((reg_val &
++			~(M_PRIOLVL_OVERRIDE_BMSK)) | (val
++			& M_PRIOLVL_OVERRIDE_BMSK)),
++			M_PRIOLVL_OVERRIDE_ADDR(base, mas_index));
++
++		reg_val = readl_relaxed(M_RD_CMD_OVERRIDE_ADDR(
++			base, mas_index)) & M_RD_CMD_OVERRIDE_RMSK;
++		val =  qmode->fixed.areq_prio_rd <<
++			M_RD_CMD_OVERRIDE_AREQPRIO_SHFT;
++		writel_relaxed(((reg_val & ~(M_RD_CMD_OVERRIDE_AREQPRIO_BMSK))
++			| (val & M_RD_CMD_OVERRIDE_AREQPRIO_BMSK)),
++			M_RD_CMD_OVERRIDE_ADDR(base, mas_index));
++
++		reg_val = readl_relaxed(M_WR_CMD_OVERRIDE_ADDR(
++			base, mas_index)) & M_WR_CMD_OVERRIDE_RMSK;
++		val =  qmode->fixed.areq_prio_wr <<
++			M_WR_CMD_OVERRIDE_AREQPRIO_SHFT;
++		writel_relaxed(((reg_val & ~(M_WR_CMD_OVERRIDE_AREQPRIO_BMSK))
++			| (val & M_WR_CMD_OVERRIDE_AREQPRIO_BMSK)),
++			M_WR_CMD_OVERRIDE_ADDR(base, mas_index));
++		/* Ensure that fixed mode register writes go through
++		 * before returning
++		 */
++		wmb();
++		break;
++
++	case BIMC_QOS_MODE_REGULATOR:
++	case BIMC_QOS_MODE_LIMITER:
++		set_qos_prio_rl(M_BKE_HEALTH_3_CONFIG_ADDR(base,
++			mas_index), M_BKE_HEALTH_3_CONFIG_RMSK, 3, qmode);
++		set_qos_prio_rl(M_BKE_HEALTH_2_CONFIG_ADDR(base,
++			mas_index), M_BKE_HEALTH_2_CONFIG_RMSK, 2, qmode);
++		set_qos_prio_rl(M_BKE_HEALTH_1_CONFIG_ADDR(base,
++			mas_index), M_BKE_HEALTH_1_CONFIG_RMSK, 1, qmode);
++		set_qos_prio_rl(M_BKE_HEALTH_0_CONFIG_ADDR(base,
++			mas_index), M_BKE_HEALTH_0_CONFIG_RMSK, 0 , qmode);
++		break;
++	case BIMC_QOS_MODE_BYPASS:
++	default:
++		break;
++	}
++}
++
++static void set_qos_bw_regs(void __iomem *baddr, uint32_t mas_index,
++	int32_t th, int32_t tm, int32_t tl, uint32_t gp,
++	uint32_t gc)
++{
++	int32_t reg_val, val;
++	int32_t bke_reg_val;
++	int16_t val2;
++
++	/* Disable BKE before writing to registers as per spec */
++	bke_reg_val = readl_relaxed(M_BKE_EN_ADDR(baddr, mas_index));
++	writel_relaxed((bke_reg_val & ~(M_BKE_EN_EN_BMSK)),
++		M_BKE_EN_ADDR(baddr, mas_index));
++
++	/* Write values of registers calculated */
++	reg_val = readl_relaxed(M_BKE_GP_ADDR(baddr, mas_index))
++		& M_BKE_GP_RMSK;
++	val =  gp << M_BKE_GP_GP_SHFT;
++	writel_relaxed(((reg_val & ~(M_BKE_GP_GP_BMSK)) | (val &
++		M_BKE_GP_GP_BMSK)), M_BKE_GP_ADDR(baddr, mas_index));
++
++	reg_val = readl_relaxed(M_BKE_GC_ADDR(baddr, mas_index)) &
++		M_BKE_GC_RMSK;
++	val =  gc << M_BKE_GC_GC_SHFT;
++	writel_relaxed(((reg_val & ~(M_BKE_GC_GC_BMSK)) | (val &
++		M_BKE_GC_GC_BMSK)), M_BKE_GC_ADDR(baddr, mas_index));
++
++	reg_val = readl_relaxed(M_BKE_THH_ADDR(baddr, mas_index)) &
++		M_BKE_THH_RMSK;
++	val =  th << M_BKE_THH_THRESH_SHFT;
++	writel_relaxed(((reg_val & ~(M_BKE_THH_THRESH_BMSK)) | (val &
++		M_BKE_THH_THRESH_BMSK)), M_BKE_THH_ADDR(baddr, mas_index));
++
++	reg_val = readl_relaxed(M_BKE_THM_ADDR(baddr, mas_index)) &
++		M_BKE_THM_RMSK;
++	val2 =	tm << M_BKE_THM_THRESH_SHFT;
++	writel_relaxed(((reg_val & ~(M_BKE_THM_THRESH_BMSK)) | (val2 &
++		M_BKE_THM_THRESH_BMSK)), M_BKE_THM_ADDR(baddr, mas_index));
++
++	reg_val = readl_relaxed(M_BKE_THL_ADDR(baddr, mas_index)) &
++		M_BKE_THL_RMSK;
++	val2 =	tl << M_BKE_THL_THRESH_SHFT;
++	writel_relaxed(((reg_val & ~(M_BKE_THL_THRESH_BMSK)) |
++		(val2 & M_BKE_THL_THRESH_BMSK)), M_BKE_THL_ADDR(baddr,
++		mas_index));
++
++	/* Ensure that all bandwidth register writes have completed
++	 * before returning
++	 */
++	wmb();
++}
++
++static void msm_bus_bimc_set_qos_bw(void __iomem *base, uint32_t qos_freq,
++	uint32_t mas_index, struct msm_bus_bimc_qos_bw *qbw)
++{
++	uint32_t bke_en;
++
++	/* Validate QOS Frequency */
++	if (qos_freq == 0) {
++		MSM_BUS_DBG("Zero frequency\n");
++		return;
++	}
++
++	/* Get enable bit for BKE before programming the period */
++	bke_en = (readl_relaxed(M_BKE_EN_ADDR(base, mas_index)) &
++		M_BKE_EN_EN_BMSK) >> M_BKE_EN_EN_SHFT;
++
++	/* Only calculate if there's a requested bandwidth and window */
++	if (qbw->bw && qbw->ws) {
++		int64_t th, tm, tl;
++		uint32_t gp, gc;
++		int64_t gp_nominal, gp_required, gp_calc, data, temp;
++		int64_t win = qbw->ws * qos_freq;
++		temp = win;
++		/*
++		 * Calculate nominal grant period defined by requested
++		 * window size.
++		 * Ceil this value to max grant period.
++		 */
++		bimc_div(&temp, 1000000);
++		gp_nominal = min_t(uint64_t, MAX_GRANT_PERIOD, temp);
++		/*
++		 * Calculate max window size, defined by bw request.
++		 * Units: (KHz, MB/s)
++		 */
++		gp_calc = MAX_GC * qos_freq * 1000;
++		gp_required = gp_calc;
++		bimc_div(&gp_required, qbw->bw);
++
++		/* User min of two grant periods */
++		gp = min_t(int64_t, gp_nominal, gp_required);
++
++		/* Calculate bandwith in grants and ceil. */
++		temp = qbw->bw * gp;
++		data = qos_freq * 1000;
++		bimc_div(&temp, data);
++		gc = min_t(int64_t, MAX_GC, temp);
++
++		/* Calculate thresholds */
++		th = qbw->bw - qbw->thh;
++		tm = qbw->bw - qbw->thm;
++		tl = qbw->bw - qbw->thl;
++
++		th = th * gp;
++		bimc_div(&th, data);
++		tm = tm * gp;
++		bimc_div(&tm, data);
++		tl = tl * gp;
++		bimc_div(&tl, data);
++
++		MSM_BUS_DBG("BIMC: BW: mas_index: %d, th: %llu tm: %llu\n",
++			mas_index, th, tm);
++		MSM_BUS_DBG("BIMC: tl: %llu gp:%u gc: %u bke_en: %u\n",
++			tl, gp, gc, bke_en);
++		set_qos_bw_regs(base, mas_index, th, tm, tl, gp, gc);
++	} else
++		/* Clear bandwidth registers */
++		set_qos_bw_regs(base, mas_index, 0, 0, 0, 0, 0);
++}
++
++static int msm_bus_bimc_allocate_commit_data(struct msm_bus_fabric_registration
++	*fab_pdata, void **cdata, int ctx)
++{
++	struct msm_bus_bimc_commit **cd = (struct msm_bus_bimc_commit **)cdata;
++	struct msm_bus_bimc_info *binfo =
++		(struct msm_bus_bimc_info *)fab_pdata->hw_data;
++
++	MSM_BUS_DBG("Allocating BIMC commit data\n");
++	*cd = kzalloc(sizeof(struct msm_bus_bimc_commit), GFP_KERNEL);
++	if (!*cd) {
++		MSM_BUS_DBG("Couldn't alloc mem for cdata\n");
++		return -ENOMEM;
++	}
++
++	(*cd)->mas = binfo->cdata[ctx].mas;
++	(*cd)->slv = binfo->cdata[ctx].slv;
++
++	return 0;
++}
++
++static void *msm_bus_bimc_allocate_bimc_data(struct platform_device *pdev,
++	struct msm_bus_fabric_registration *fab_pdata)
++{
++	struct resource *bimc_mem;
++	struct resource *bimc_io;
++	struct msm_bus_bimc_info *binfo;
++	int i;
++
++	MSM_BUS_DBG("Allocating BIMC data\n");
++	binfo = kzalloc(sizeof(struct msm_bus_bimc_info), GFP_KERNEL);
++	if (!binfo) {
++		WARN(!binfo, "Couldn't alloc mem for bimc_info\n");
++		return NULL;
++	}
++
++	binfo->qos_freq = fab_pdata->qos_freq;
++
++	binfo->params.nmasters = fab_pdata->nmasters;
++	binfo->params.nslaves = fab_pdata->nslaves;
++	binfo->params.bus_id = fab_pdata->id;
++
++	for (i = 0; i < NUM_CTX; i++) {
++		binfo->cdata[i].mas = kzalloc(sizeof(struct
++			msm_bus_node_hw_info) * fab_pdata->nmasters * 2,
++			GFP_KERNEL);
++		if (!binfo->cdata[i].mas) {
++			MSM_BUS_ERR("Couldn't alloc mem for bimc master hw\n");
++			kfree(binfo);
++			return NULL;
++		}
++
++		binfo->cdata[i].slv = kzalloc(sizeof(struct
++			msm_bus_node_hw_info) * fab_pdata->nslaves * 2,
++			GFP_KERNEL);
++		if (!binfo->cdata[i].slv) {
++			MSM_BUS_DBG("Couldn't alloc mem for bimc slave hw\n");
++			kfree(binfo->cdata[i].mas);
++			kfree(binfo);
++			return NULL;
++		}
++	}
++
++	if (fab_pdata->virt) {
++		MSM_BUS_DBG("Don't get memory regions for virtual fabric\n");
++		goto skip_mem;
++	}
++
++	bimc_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!bimc_mem) {
++		MSM_BUS_ERR("Cannot get BIMC Base address\n");
++		kfree(binfo);
++		return NULL;
++	}
++
++	bimc_io = request_mem_region(bimc_mem->start,
++			resource_size(bimc_mem), pdev->name);
++	if (!bimc_io) {
++		MSM_BUS_ERR("BIMC memory unavailable\n");
++		kfree(binfo);
++		return NULL;
++	}
++
++	binfo->base = ioremap(bimc_mem->start, resource_size(bimc_mem));
++	if (!binfo->base) {
++		MSM_BUS_ERR("IOremap failed for BIMC!\n");
++		release_mem_region(bimc_mem->start, resource_size(bimc_mem));
++		kfree(binfo);
++		return NULL;
++	}
++
++skip_mem:
++	fab_pdata->hw_data = (void *)binfo;
++	return (void *)binfo;
++}
++
++static void free_commit_data(void *cdata)
++{
++	struct msm_bus_bimc_commit *cd = (struct msm_bus_bimc_commit *)cdata;
++
++	kfree(cd->mas);
++	kfree(cd->slv);
++	kfree(cd);
++}
++
++static void bke_switch(
++	void __iomem *baddr, uint32_t mas_index, bool req, int mode)
++{
++	uint32_t reg_val, val, cur_val;
++
++	val = req << M_BKE_EN_EN_SHFT;
++	reg_val = readl_relaxed(M_BKE_EN_ADDR(baddr, mas_index));
++	cur_val = reg_val & M_BKE_EN_RMSK;
++	if (val == cur_val)
++		return;
++
++	if (!req && mode == BIMC_QOS_MODE_FIXED)
++		set_qos_mode(baddr, mas_index, 1, 1, 1);
++
++	writel_relaxed(((reg_val & ~(M_BKE_EN_EN_BMSK)) | (val &
++		M_BKE_EN_EN_BMSK)), M_BKE_EN_ADDR(baddr, mas_index));
++	/* Make sure BKE on/off goes through before changing priorities */
++	wmb();
++
++	if (req)
++		set_qos_mode(baddr, mas_index, 0, 0, 0);
++}
++
++static void bimc_set_static_qos_bw(void __iomem *base, unsigned int qos_freq,
++	int mport, struct msm_bus_bimc_qos_bw *qbw)
++{
++	int32_t bw_mbps, thh = 0, thm, thl, gc;
++	int32_t gp;
++	u64 temp;
++
++	if (qos_freq == 0) {
++		MSM_BUS_DBG("No QoS Frequency.\n");
++		return;
++	}
++
++	if (!(qbw->bw && qbw->gp)) {
++		MSM_BUS_DBG("No QoS Bandwidth or Window size\n");
++		return;
++	}
++
++	/* Convert bandwidth to MBPS */
++	temp = qbw->bw;
++	bimc_div(&temp, 1000000);
++	bw_mbps = temp;
++
++	/* Grant period in clock cycles
++	 * Grant period from bandwidth structure
++	 * is in nano seconds, QoS freq is in KHz.
++	 * Divide by 1000 to get clock cycles.
++	 */
++	gp = (qos_freq * qbw->gp) / (1000 * NSEC_PER_USEC);
++
++	/* Grant count = BW in MBps * Grant period
++	 * in micro seconds
++	 */
++	gc = bw_mbps * (qbw->gp / NSEC_PER_USEC);
++	gc = min(gc, MAX_GC);
++
++	/* Medium threshold = -((Medium Threshold percentage *
++	 * Grant count) / 100)
++	 */
++	thm = -((qbw->thmp * gc) / 100);
++	qbw->thm = thm;
++
++	/* Low threshold = -(Grant count) */
++	thl = -gc;
++	qbw->thl = thl;
++
++	MSM_BUS_DBG("%s: BKE parameters: gp %d, gc %d, thm %d thl %d thh %d",
++			__func__, gp, gc, thm, thl, thh);
++
++	trace_bus_bke_params(gc, gp, thl, thm, thl);
++	set_qos_bw_regs(base, mport, thh, thm, thl, gp, gc);
++}
++
++static void msm_bus_bimc_config_master(
++	struct msm_bus_fabric_registration *fab_pdata,
++	struct msm_bus_inode_info *info,
++	uint64_t req_clk, uint64_t req_bw)
++{
++	int mode, i, ports;
++	struct msm_bus_bimc_info *binfo;
++	uint64_t bw = 0;
++
++	binfo = (struct msm_bus_bimc_info *)fab_pdata->hw_data;
++	ports = info->node_info->num_mports;
++
++	/**
++	 * Here check the details of dual configuration.
++	 * Take actions based on different modes.
++	 * Check for threshold if limiter mode, etc.
++	*/
++
++	if (req_clk <= info->node_info->th[0]) {
++		mode = info->node_info->mode;
++		bw = info->node_info->bimc_bw[0];
++	} else if ((info->node_info->num_thresh > 1) &&
++			(req_clk <= info->node_info->th[1])) {
++		mode = info->node_info->mode;
++		bw = info->node_info->bimc_bw[1];
++	} else
++		mode = info->node_info->mode_thresh;
++
++	switch (mode) {
++	case BIMC_QOS_MODE_BYPASS:
++	case BIMC_QOS_MODE_FIXED:
++		for (i = 0; i < ports; i++)
++			bke_switch(binfo->base, info->node_info->qport[i],
++				BKE_OFF, mode);
++		break;
++	case BIMC_QOS_MODE_REGULATOR:
++	case BIMC_QOS_MODE_LIMITER:
++		for (i = 0; i < ports; i++) {
++			/* If not in fixed mode, update bandwidth */
++			if ((info->node_info->cur_lim_bw != bw)
++					&& (mode != BIMC_QOS_MODE_FIXED)) {
++				struct msm_bus_bimc_qos_bw qbw;
++				qbw.ws = info->node_info->ws;
++				qbw.bw = bw;
++				qbw.gp = info->node_info->bimc_gp;
++				qbw.thmp = info->node_info->bimc_thmp;
++				bimc_set_static_qos_bw(binfo->base,
++					binfo->qos_freq,
++					info->node_info->qport[i], &qbw);
++				info->node_info->cur_lim_bw = bw;
++				MSM_BUS_DBG("%s: Qos is %d reqclk %llu bw %llu",
++						__func__, mode, req_clk, bw);
++			}
++			bke_switch(binfo->base, info->node_info->qport[i],
++				BKE_ON, mode);
++		}
++		break;
++	default:
++		break;
++	}
++}
++
++static void msm_bus_bimc_update_bw(struct msm_bus_inode_info *hop,
++	struct msm_bus_inode_info *info,
++	struct msm_bus_fabric_registration *fab_pdata,
++	void *sel_cdata, int *master_tiers,
++	int64_t add_bw)
++{
++	struct msm_bus_bimc_info *binfo;
++	struct msm_bus_bimc_qos_bw qbw;
++	int i;
++	int64_t bw;
++	int ports = info->node_info->num_mports;
++	struct msm_bus_bimc_commit *sel_cd =
++		(struct msm_bus_bimc_commit *)sel_cdata;
++
++	MSM_BUS_DBG("BIMC: Update bw for ID %d, with IID: %d: %lld\n",
++		info->node_info->id, info->node_info->priv_id, add_bw);
++
++	binfo = (struct msm_bus_bimc_info *)fab_pdata->hw_data;
++
++	if (info->node_info->num_mports == 0) {
++		MSM_BUS_DBG("BIMC: Skip Master BW\n");
++		goto skip_mas_bw;
++	}
++
++	ports = info->node_info->num_mports;
++	bw = INTERLEAVED_BW(fab_pdata, add_bw, ports);
++
++	for (i = 0; i < ports; i++) {
++		sel_cd->mas[info->node_info->masterp[i]].bw += bw;
++		sel_cd->mas[info->node_info->masterp[i]].hw_id =
++			info->node_info->mas_hw_id;
++		MSM_BUS_DBG("BIMC: Update mas_bw for ID: %d -> %llu\n",
++			info->node_info->priv_id,
++			sel_cd->mas[info->node_info->masterp[i]].bw);
++		if (info->node_info->hw_sel == MSM_BUS_RPM)
++			sel_cd->mas[info->node_info->masterp[i]].dirty = 1;
++		else {
++			if (!info->node_info->qport) {
++				MSM_BUS_DBG("No qos ports to update!\n");
++				break;
++			}
++			if (!(info->node_info->mode == BIMC_QOS_MODE_REGULATOR)
++					|| (info->node_info->mode ==
++						BIMC_QOS_MODE_LIMITER)) {
++				MSM_BUS_DBG("Skip QoS reg programming\n");
++				break;
++			}
++
++			MSM_BUS_DBG("qport: %d\n", info->node_info->qport[i]);
++			qbw.bw = sel_cd->mas[info->node_info->masterp[i]].bw;
++			qbw.ws = info->node_info->ws;
++			/* Threshold low = 90% of bw */
++			qbw.thl = div_s64((90 * bw), 100);
++			/* Threshold medium = bw */
++			qbw.thm = bw;
++			/* Threshold high = 10% more than bw */
++			qbw.thh = div_s64((110 * bw), 100);
++			/* Check if info is a shared master.
++			 * If it is, mark it dirty
++			 * If it isn't, then set QOS Bandwidth.
++			 * Also if dual-conf is set, don't program bw regs.
++			 **/
++			if (!info->node_info->dual_conf &&
++			((info->node_info->mode == BIMC_QOS_MODE_LIMITER) ||
++			(info->node_info->mode == BIMC_QOS_MODE_REGULATOR)))
++				msm_bus_bimc_set_qos_bw(binfo->base,
++					binfo->qos_freq,
++					info->node_info->qport[i], &qbw);
++		}
++	}
++
++skip_mas_bw:
++	ports = hop->node_info->num_sports;
++	MSM_BUS_DBG("BIMC: ID: %d, Sports: %d\n", hop->node_info->priv_id,
++		ports);
++
++	for (i = 0; i < ports; i++) {
++		sel_cd->slv[hop->node_info->slavep[i]].bw += add_bw;
++		sel_cd->slv[hop->node_info->slavep[i]].hw_id =
++			hop->node_info->slv_hw_id;
++		MSM_BUS_DBG("BIMC: Update slave_bw: ID: %d -> %llu\n",
++			hop->node_info->priv_id,
++			sel_cd->slv[hop->node_info->slavep[i]].bw);
++		MSM_BUS_DBG("BIMC: Update slave_bw: index: %d\n",
++			hop->node_info->slavep[i]);
++		/* Check if hop is a shared slave.
++		 * If it is, mark it dirty
++		 * If it isn't, then nothing to be done as the
++		 * slaves are in bypass mode.
++		 **/
++		if (hop->node_info->hw_sel == MSM_BUS_RPM) {
++			MSM_BUS_DBG("Slave dirty: %d, slavep: %d\n",
++				hop->node_info->priv_id,
++				hop->node_info->slavep[i]);
++			sel_cd->slv[hop->node_info->slavep[i]].dirty = 1;
++		}
++	}
++}
++
++static int msm_bus_bimc_commit(struct msm_bus_fabric_registration
++	*fab_pdata, void *hw_data, void **cdata)
++{
++	MSM_BUS_DBG("\nReached BIMC Commit\n");
++	msm_bus_remote_hw_commit(fab_pdata, hw_data, cdata);
++	return 0;
++}
++
++static void msm_bus_bimc_config_limiter(
++	struct msm_bus_fabric_registration *fab_pdata,
++	struct msm_bus_inode_info *info)
++{
++	struct msm_bus_bimc_info *binfo;
++	int mode, i, ports;
++
++	binfo = (struct msm_bus_bimc_info *)fab_pdata->hw_data;
++	ports = info->node_info->num_mports;
++
++	if (!info->node_info->qport) {
++		MSM_BUS_DBG("No QoS Ports to init\n");
++		return;
++	}
++
++	if (info->cur_lim_bw)
++		mode = BIMC_QOS_MODE_LIMITER;
++	else
++		mode = info->node_info->mode;
++
++	switch (mode) {
++	case BIMC_QOS_MODE_BYPASS:
++	case BIMC_QOS_MODE_FIXED:
++		for (i = 0; i < ports; i++)
++			bke_switch(binfo->base, info->node_info->qport[i],
++				BKE_OFF, mode);
++		break;
++	case BIMC_QOS_MODE_REGULATOR:
++	case BIMC_QOS_MODE_LIMITER:
++		if (info->cur_lim_bw != info->cur_prg_bw) {
++			MSM_BUS_DBG("Enabled BKE throttling node %d to %llu\n",
++				info->node_info->id, info->cur_lim_bw);
++			trace_bus_bimc_config_limiter(info->node_info->id,
++				info->cur_lim_bw);
++			for (i = 0; i < ports; i++) {
++				/* If not in fixed mode, update bandwidth */
++				struct msm_bus_bimc_qos_bw qbw;
++
++				qbw.ws = info->node_info->ws;
++				qbw.bw = info->cur_lim_bw;
++				qbw.gp = info->node_info->bimc_gp;
++				qbw.thmp = info->node_info->bimc_thmp;
++				bimc_set_static_qos_bw(binfo->base,
++					binfo->qos_freq,
++					info->node_info->qport[i], &qbw);
++				bke_switch(binfo->base,
++					info->node_info->qport[i],
++					BKE_ON, mode);
++				info->cur_prg_bw = qbw.bw;
++			}
++		}
++		break;
++	default:
++		break;
++	}
++}
++
++static void bimc_init_mas_reg(struct msm_bus_bimc_info *binfo,
++	struct msm_bus_inode_info *info,
++	struct msm_bus_bimc_qos_mode *qmode, int mode)
++{
++	int i;
++
++	switch (mode) {
++	case BIMC_QOS_MODE_FIXED:
++		qmode->fixed.prio_level = info->node_info->prio_lvl;
++		qmode->fixed.areq_prio_rd = info->node_info->prio_rd;
++		qmode->fixed.areq_prio_wr = info->node_info->prio_wr;
++		break;
++	case BIMC_QOS_MODE_LIMITER:
++		qmode->rl.qhealth[0].limit_commands = 1;
++		qmode->rl.qhealth[1].limit_commands = 0;
++		qmode->rl.qhealth[2].limit_commands = 0;
++		qmode->rl.qhealth[3].limit_commands = 0;
++		break;
++	default:
++		break;
++	}
++
++	if (!info->node_info->qport) {
++		MSM_BUS_DBG("No QoS Ports to init\n");
++		return;
++	}
++
++	for (i = 0; i < info->node_info->num_mports; i++) {
++		/* If not in bypass mode, update priority */
++		if (mode != BIMC_QOS_MODE_BYPASS) {
++			msm_bus_bimc_set_qos_prio(binfo->base,
++				info->node_info->
++				qport[i], mode, qmode);
++
++			/* If not in fixed mode, update bandwidth */
++			if (mode != BIMC_QOS_MODE_FIXED) {
++				struct msm_bus_bimc_qos_bw qbw;
++				qbw.ws = info->node_info->ws;
++				qbw.bw = info->node_info->bimc_bw[0];
++				qbw.gp = info->node_info->bimc_gp;
++				qbw.thmp = info->node_info->bimc_thmp;
++				bimc_set_static_qos_bw(binfo->base,
++					binfo->qos_freq,
++					info->node_info->qport[i], &qbw);
++			}
++		}
++
++		/* set mode */
++		msm_bus_bimc_set_qos_mode(binfo->base,
++					info->node_info->qport[i],
++					mode);
++	}
++}
++
++static void init_health_regs(struct msm_bus_bimc_info *binfo,
++				struct msm_bus_inode_info *info,
++				struct msm_bus_bimc_qos_mode *qmode,
++				int mode)
++{
++	int i;
++
++	if (mode == BIMC_QOS_MODE_LIMITER) {
++		qmode->rl.qhealth[0].limit_commands = 1;
++		qmode->rl.qhealth[1].limit_commands = 0;
++		qmode->rl.qhealth[2].limit_commands = 0;
++		qmode->rl.qhealth[3].limit_commands = 0;
++
++		if (!info->node_info->qport) {
++			MSM_BUS_DBG("No QoS Ports to init\n");
++			return;
++		}
++
++		for (i = 0; i < info->node_info->num_mports; i++) {
++			/* If not in bypass mode, update priority */
++			if (mode != BIMC_QOS_MODE_BYPASS)
++				msm_bus_bimc_set_qos_prio(binfo->base,
++				info->node_info->qport[i], mode, qmode);
++		}
++	}
++}
++
++
++static int msm_bus_bimc_mas_init(struct msm_bus_bimc_info *binfo,
++	struct msm_bus_inode_info *info)
++{
++	struct msm_bus_bimc_qos_mode *qmode;
++	qmode = kzalloc(sizeof(struct msm_bus_bimc_qos_mode),
++		GFP_KERNEL);
++	if (!qmode) {
++		MSM_BUS_WARN("Couldn't alloc prio data for node: %d\n",
++			info->node_info->id);
++		return -ENOMEM;
++	}
++
++	info->hw_data = (void *)qmode;
++
++	/**
++	 * If the master supports dual configuration,
++	 * configure registers for both modes
++	 */
++	if (info->node_info->dual_conf)
++		bimc_init_mas_reg(binfo, info, qmode,
++			info->node_info->mode_thresh);
++	else if (info->node_info->nr_lim)
++		init_health_regs(binfo, info, qmode, BIMC_QOS_MODE_LIMITER);
++
++	bimc_init_mas_reg(binfo, info, qmode, info->node_info->mode);
++	return 0;
++}
++
++static void msm_bus_bimc_node_init(void *hw_data,
++	struct msm_bus_inode_info *info)
++{
++	struct msm_bus_bimc_info *binfo =
++		(struct msm_bus_bimc_info *)hw_data;
++
++	if (!IS_SLAVE(info->node_info->priv_id) &&
++		(info->node_info->hw_sel != MSM_BUS_RPM))
++		msm_bus_bimc_mas_init(binfo, info);
++}
++
++static int msm_bus_bimc_port_halt(uint32_t haltid, uint8_t mport)
++{
++	return 0;
++}
++
++static int msm_bus_bimc_port_unhalt(uint32_t haltid, uint8_t mport)
++{
++	return 0;
++}
++
++static int msm_bus_bimc_limit_mport(struct msm_bus_node_device_type *info,
++				void __iomem *qos_base, uint32_t qos_off,
++				uint32_t qos_delta, uint32_t qos_freq,
++				bool enable_lim, u64 lim_bw)
++{
++	int mode;
++	int i;
++
++	if (ZERO_OR_NULL_PTR(info->node_info->qport)) {
++		MSM_BUS_DBG("No QoS Ports to limit\n");
++		return 0;
++	}
++
++	if (enable_lim && lim_bw) {
++		mode =  BIMC_QOS_MODE_LIMITER;
++
++		if (!info->node_info->lim_bw) {
++			struct msm_bus_bimc_qos_mode qmode;
++			qmode.rl.qhealth[0].limit_commands = 1;
++			qmode.rl.qhealth[1].limit_commands = 0;
++			qmode.rl.qhealth[2].limit_commands = 0;
++			qmode.rl.qhealth[3].limit_commands = 0;
++
++			for (i = 0; i < info->node_info->num_qports; i++) {
++				/* If not in bypass mode, update priority */
++				if (mode != BIMC_QOS_MODE_BYPASS)
++					msm_bus_bimc_set_qos_prio(qos_base,
++					info->node_info->qport[i], mode,
++					&qmode);
++			}
++		}
++
++		for (i = 0; i < info->node_info->num_qports; i++) {
++			struct msm_bus_bimc_qos_bw qbw;
++			/* If not in fixed mode, update bandwidth */
++			if ((info->node_info->lim_bw != lim_bw)) {
++				qbw.ws = info->node_info->qos_params.ws;
++				qbw.bw = lim_bw;
++				qbw.gp = info->node_info->qos_params.gp;
++				qbw.thmp = info->node_info->qos_params.thmp;
++				bimc_set_static_qos_bw(qos_base, qos_freq,
++					info->node_info->qport[i], &qbw);
++			}
++			bke_switch(qos_base, info->node_info->qport[i],
++				BKE_ON, mode);
++		}
++		info->node_info->lim_bw = lim_bw;
++	} else {
++		mode = info->node_info->qos_params.mode;
++		for (i = 0; i < info->node_info->num_qports; i++) {
++			bke_switch(qos_base, info->node_info->qport[i],
++				BKE_OFF, mode);
++		}
++	}
++	info->node_info->qos_params.cur_mode = mode;
++	return 0;
++}
++
++static bool msm_bus_bimc_update_bw_reg(int mode)
++{
++	bool ret = false;
++
++	if ((mode == BIMC_QOS_MODE_LIMITER)
++		|| (mode == BIMC_QOS_MODE_REGULATOR))
++		ret = true;
++
++	return ret;
++}
++
++static int msm_bus_bimc_qos_init(struct msm_bus_node_device_type *info,
++				void __iomem *qos_base,
++				uint32_t qos_off, uint32_t qos_delta,
++				uint32_t qos_freq)
++{
++	int i;
++	struct msm_bus_bimc_qos_mode qmode;
++
++	switch (info->node_info->qos_params.mode) {
++	case BIMC_QOS_MODE_FIXED:
++		qmode.fixed.prio_level = info->node_info->qos_params.prio_lvl;
++		qmode.fixed.areq_prio_rd = info->node_info->qos_params.prio_rd;
++		qmode.fixed.areq_prio_wr = info->node_info->qos_params.prio_wr;
++		break;
++	case BIMC_QOS_MODE_LIMITER:
++		qmode.rl.qhealth[0].limit_commands = 1;
++		qmode.rl.qhealth[1].limit_commands = 0;
++		qmode.rl.qhealth[2].limit_commands = 0;
++		qmode.rl.qhealth[3].limit_commands = 0;
++		break;
++	default:
++		break;
++	}
++
++	if (ZERO_OR_NULL_PTR(info->node_info->qport)) {
++		MSM_BUS_DBG("No QoS Ports to init\n");
++		return 0;
++	}
++
++	for (i = 0; i < info->node_info->num_qports; i++) {
++		/* If not in bypass mode, update priority */
++		if (info->node_info->qos_params.mode != BIMC_QOS_MODE_BYPASS)
++			msm_bus_bimc_set_qos_prio(qos_base, info->node_info->
++				qport[i], info->node_info->qos_params.mode,
++									&qmode);
++
++		/* set mode */
++		if (info->node_info->qos_params.mode == BIMC_QOS_MODE_LIMITER)
++			bke_switch(qos_base, info->node_info->qport[i],
++				BKE_OFF, BIMC_QOS_MODE_FIXED);
++		else
++		       msm_bus_bimc_set_qos_mode(qos_base,
++				info->node_info->qport[i],
++				info->node_info->qos_params.mode);
++	}
++
++	return 0;
++}
++
++static int msm_bus_bimc_set_bw(struct msm_bus_node_device_type *dev,
++				void __iomem *qos_base, uint32_t qos_off,
++				uint32_t qos_delta, uint32_t qos_freq)
++{
++	struct msm_bus_bimc_qos_bw qbw;
++	int i;
++	int64_t bw = 0;
++	int ret = 0;
++	struct msm_bus_node_info_type *info = dev->node_info;
++
++	if (info && info->num_qports &&
++		((info->qos_params.mode == BIMC_QOS_MODE_LIMITER) ||
++		(info->qos_params.mode == BIMC_QOS_MODE_REGULATOR))) {
++		bw = msm_bus_div64(info->num_qports,
++				dev->node_ab.ab[DUAL_CTX]);
++
++		for (i = 0; i < info->num_qports; i++) {
++			MSM_BUS_DBG("BIMC: Update mas_bw for ID: %d -> %llu\n",
++				info->id, bw);
++
++			if (!info->qport) {
++				MSM_BUS_DBG("No qos ports to update!\n");
++				break;
++			}
++
++			qbw.bw = bw + info->qos_params.bw_buffer;
++			trace_bus_bimc_config_limiter(info->id, bw);
++
++			/* Default to gp of 5us */
++			qbw.gp = (info->qos_params.gp ?
++					info->qos_params.gp : 5000);
++			/* Default to thmp of 50% */
++			qbw.thmp = (info->qos_params.thmp ?
++					info->qos_params.thmp : 50);
++			/*
++			 * If the BW vote is 0 then set the QoS mode to
++			 * Fixed.
++			 */
++			if (bw) {
++				bimc_set_static_qos_bw(qos_base, qos_freq,
++					info->qport[i], &qbw);
++				bke_switch(qos_base, info->qport[i],
++					BKE_ON, info->qos_params.mode);
++			} else {
++				bke_switch(qos_base, info->qport[i],
++					BKE_OFF, BIMC_QOS_MODE_FIXED);
++			}
++		}
++	}
++	return ret;
++}
++
++int msm_bus_bimc_hw_init(struct msm_bus_fabric_registration *pdata,
++	struct msm_bus_hw_algorithm *hw_algo)
++{
++	/* Set interleaving to true by default */
++	MSM_BUS_DBG("\nInitializing BIMC...\n");
++	pdata->il_flag = true;
++	hw_algo->allocate_commit_data = msm_bus_bimc_allocate_commit_data;
++	hw_algo->allocate_hw_data = msm_bus_bimc_allocate_bimc_data;
++	hw_algo->node_init = msm_bus_bimc_node_init;
++	hw_algo->free_commit_data = free_commit_data;
++	hw_algo->update_bw = msm_bus_bimc_update_bw;
++	hw_algo->commit = msm_bus_bimc_commit;
++	hw_algo->port_halt = msm_bus_bimc_port_halt;
++	hw_algo->port_unhalt = msm_bus_bimc_port_unhalt;
++	hw_algo->config_master = msm_bus_bimc_config_master;
++	hw_algo->config_limiter = msm_bus_bimc_config_limiter;
++	hw_algo->update_bw_reg = msm_bus_bimc_update_bw_reg;
++	/* BIMC slaves are shared. Slave registers are set through RPM */
++	if (!pdata->ahb)
++		pdata->rpm_enabled = 1;
++	return 0;
++}
++
++int msm_bus_bimc_set_ops(struct msm_bus_node_device_type *bus_dev)
++{
++	if (!bus_dev)
++		return -ENODEV;
++	else {
++		bus_dev->fabdev->noc_ops.qos_init = msm_bus_bimc_qos_init;
++		bus_dev->fabdev->noc_ops.set_bw = msm_bus_bimc_set_bw;
++		bus_dev->fabdev->noc_ops.limit_mport = msm_bus_bimc_limit_mport;
++		bus_dev->fabdev->noc_ops.update_bw_reg =
++						msm_bus_bimc_update_bw_reg;
++	}
++	return 0;
++}
++EXPORT_SYMBOL(msm_bus_bimc_set_ops);
+--- /dev/null
++++ b/drivers/bus/msm_bus/msm_bus_bimc.h
+@@ -0,0 +1,127 @@
++/* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++
++#ifndef _ARCH_ARM_MACH_MSM_BUS_BIMC_H
++#define _ARCH_ARM_MACH_MSM_BUS_BIMC_H
++
++struct msm_bus_bimc_params {
++	uint32_t bus_id;
++	uint32_t addr_width;
++	uint32_t data_width;
++	uint32_t nmasters;
++	uint32_t nslaves;
++};
++
++struct msm_bus_bimc_commit {
++	struct msm_bus_node_hw_info *mas;
++	struct msm_bus_node_hw_info *slv;
++};
++
++struct msm_bus_bimc_info {
++	void __iomem *base;
++	uint32_t base_addr;
++	uint32_t qos_freq;
++	struct msm_bus_bimc_params params;
++	struct msm_bus_bimc_commit cdata[NUM_CTX];
++};
++
++struct msm_bus_bimc_node {
++	uint32_t conn_mask;
++	uint32_t data_width;
++	uint8_t slv_arb_mode;
++};
++
++enum msm_bus_bimc_arb_mode {
++	BIMC_ARB_MODE_RR = 0,
++	BIMC_ARB_MODE_PRIORITY_RR,
++	BIMC_ARB_MODE_TIERED_RR,
++};
++
++
++enum msm_bus_bimc_interleave {
++	BIMC_INTERLEAVE_NONE = 0,
++	BIMC_INTERLEAVE_ODD,
++	BIMC_INTERLEAVE_EVEN,
++};
++
++struct msm_bus_bimc_slave_seg {
++	bool enable;
++	uint64_t start_addr;
++	uint64_t seg_size;
++	uint8_t interleave;
++};
++
++enum msm_bus_bimc_qos_mode_type {
++	BIMC_QOS_MODE_FIXED = 0,
++	BIMC_QOS_MODE_LIMITER,
++	BIMC_QOS_MODE_BYPASS,
++	BIMC_QOS_MODE_REGULATOR,
++};
++
++struct msm_bus_bimc_qos_health {
++	bool limit_commands;
++	uint32_t areq_prio;
++	uint32_t prio_level;
++};
++
++struct msm_bus_bimc_mode_fixed {
++	uint32_t prio_level;
++	uint32_t areq_prio_rd;
++	uint32_t areq_prio_wr;
++};
++
++struct msm_bus_bimc_mode_rl {
++	uint8_t qhealthnum;
++	struct msm_bus_bimc_qos_health qhealth[4];
++};
++
++struct msm_bus_bimc_qos_mode {
++	uint8_t mode;
++	struct msm_bus_bimc_mode_fixed fixed;
++	struct msm_bus_bimc_mode_rl rl;
++};
++
++struct msm_bus_bimc_qos_bw {
++	uint64_t bw;	/* bw is in Bytes/sec */
++	uint32_t ws;	/* Window size in nano seconds*/
++	int64_t thh;	/* Threshold high, bytes per second */
++	int64_t thm;	/* Threshold medium, bytes per second */
++	int64_t thl;	/* Threshold low, bytes per second */
++	u32 gp;	/* Grant Period in micro seconds */
++	u32 thmp; /* Threshold medium in percentage */
++};
++
++struct msm_bus_bimc_clk_gate {
++	bool core_clk_gate_en;
++	bool arb_clk_gate_en;	/* For arbiter */
++	bool port_clk_gate_en;	/* For regs on BIMC core clock */
++};
++
++void msm_bus_bimc_set_slave_seg(struct msm_bus_bimc_info *binfo,
++	uint32_t slv_index, uint32_t seg_index,
++	struct msm_bus_bimc_slave_seg *bsseg);
++void msm_bus_bimc_set_slave_clk_gate(struct msm_bus_bimc_info *binfo,
++	uint32_t slv_index, struct msm_bus_bimc_clk_gate *bgate);
++void msm_bus_bimc_set_mas_clk_gate(struct msm_bus_bimc_info *binfo,
++	uint32_t mas_index, struct msm_bus_bimc_clk_gate *bgate);
++void msm_bus_bimc_arb_en(struct msm_bus_bimc_info *binfo,
++	uint32_t slv_index, bool en);
++void msm_bus_bimc_get_params(struct msm_bus_bimc_info *binfo,
++	struct msm_bus_bimc_params *params);
++void msm_bus_bimc_get_mas_params(struct msm_bus_bimc_info *binfo,
++	uint32_t mas_index, struct msm_bus_bimc_node *mparams);
++void msm_bus_bimc_get_slv_params(struct msm_bus_bimc_info *binfo,
++	uint32_t slv_index, struct msm_bus_bimc_node *sparams);
++bool msm_bus_bimc_get_arb_en(struct msm_bus_bimc_info *binfo,
++	uint32_t slv_index);
++
++#endif /*_ARCH_ARM_MACH_MSM_BUS_BIMC_H*/
+--- /dev/null
++++ b/drivers/bus/msm_bus/msm_bus_client_api.c
+@@ -0,0 +1,83 @@
++/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++
++#define pr_fmt(fmt) "AXI: %s(): " fmt, __func__
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/list.h>
++#include <linux/module.h>
++#include <linux/slab.h>
++#include <linux/mutex.h>
++#include <linux/radix-tree.h>
++#include <linux/clk.h>
++#include "msm-bus.h"
++#include "msm_bus_core.h"
++
++struct msm_bus_arb_ops arb_ops;
++
++/**
++ * msm_bus_scale_register_client() - Register the clients with the msm bus
++ * driver
++ * @pdata: Platform data of the client, containing src, dest, ab, ib.
++ * Return non-zero value in case of success, 0 in case of failure.
++ *
++ * Client data contains the vectors specifying arbitrated bandwidth (ab)
++ * and instantaneous bandwidth (ib) requested between a particular
++ * src and dest.
++ */
++uint32_t msm_bus_scale_register_client(struct msm_bus_scale_pdata *pdata)
++{
++	if (arb_ops.register_client)
++		return arb_ops.register_client(pdata);
++	else {
++		pr_err("%s: Bus driver not ready.",
++				__func__);
++		return 0;
++	}
++}
++EXPORT_SYMBOL(msm_bus_scale_register_client);
++
++/**
++ * msm_bus_scale_client_update_request() - Update the request for bandwidth
++ * from a particular client
++ *
++ * cl: Handle to the client
++ * index: Index into the vector, to which the bw and clock values need to be
++ * updated
++ */
++int msm_bus_scale_client_update_request(uint32_t cl, unsigned int index)
++{
++	if (arb_ops.update_request)
++		return arb_ops.update_request(cl, index);
++	else {
++		pr_err("%s: Bus driver not ready.",
++				__func__);
++		return -EPROBE_DEFER;
++	}
++}
++EXPORT_SYMBOL(msm_bus_scale_client_update_request);
++
++/**
++ * msm_bus_scale_unregister_client() - Unregister the client from the bus driver
++ * @cl: Handle to the client
++ */
++void msm_bus_scale_unregister_client(uint32_t cl)
++{
++	if (arb_ops.unregister_client)
++		arb_ops.unregister_client(cl);
++	else {
++		pr_err("%s: Bus driver not ready.",
++				__func__);
++	}
++}
++EXPORT_SYMBOL(msm_bus_scale_unregister_client);
+--- /dev/null
++++ b/drivers/bus/msm_bus/msm_bus_core.c
+@@ -0,0 +1,125 @@
++/* Copyright (c) 2010-2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++
++#define pr_fmt(fmt) "AXI: %s(): " fmt, __func__
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/slab.h>
++#include <linux/mutex.h>
++#include <linux/radix-tree.h>
++#include <linux/clk.h>
++#include "msm-bus-board.h"
++#include "msm-bus.h"
++#include "msm_bus_core.h"
++
++static atomic_t num_fab = ATOMIC_INIT(0);
++
++int msm_bus_get_num_fab(void)
++{
++	return atomic_read(&num_fab);
++}
++
++int msm_bus_device_match(struct device *dev, void *id)
++{
++	struct msm_bus_fabric_device *fabdev = to_msm_bus_fabric_device(dev);
++
++	if (!fabdev) {
++		MSM_BUS_WARN("Fabric %p returning 0\n", fabdev);
++		return 0;
++	}
++	return fabdev->id == *(int *)id;
++}
++
++static void msm_bus_release(struct device *device)
++{
++}
++
++struct bus_type msm_bus_type = {
++	.name      = "msm-bus-type",
++};
++EXPORT_SYMBOL(msm_bus_type);
++
++/**
++ * msm_bus_get_fabric_device() - This function is used to search for
++ * the fabric device on the bus
++ * @fabid: Fabric id
++ * Function returns: Pointer to the fabric device
++ */
++struct msm_bus_fabric_device *msm_bus_get_fabric_device(int fabid)
++{
++	struct device *dev;
++	struct msm_bus_fabric_device *fabric;
++	dev = bus_find_device(&msm_bus_type, NULL, (void *)&fabid,
++		msm_bus_device_match);
++	if (!dev)
++		return NULL;
++	fabric = to_msm_bus_fabric_device(dev);
++	return fabric;
++}
++
++/**
++ * msm_bus_fabric_device_register() - Registers a fabric on msm bus
++ * @fabdev: Fabric device to be registered
++ */
++int msm_bus_fabric_device_register(struct msm_bus_fabric_device *fabdev)
++{
++	int ret = 0;
++	fabdev->dev.bus = &msm_bus_type;
++	fabdev->dev.release = msm_bus_release;
++	ret = dev_set_name(&fabdev->dev, fabdev->name);
++	if (ret) {
++		MSM_BUS_ERR("error setting dev name\n");
++		goto err;
++	}
++
++	ret = device_register(&fabdev->dev);
++	if (ret < 0) {
++		MSM_BUS_ERR("error registering device%d %s\n",
++				ret, fabdev->name);
++		goto err;
++	}
++	atomic_inc(&num_fab);
++err:
++	return ret;
++}
++
++/**
++ * msm_bus_fabric_device_unregister() - Unregisters the fabric
++ * devices from the msm bus
++ */
++void msm_bus_fabric_device_unregister(struct msm_bus_fabric_device *fabdev)
++{
++	device_unregister(&fabdev->dev);
++	atomic_dec(&num_fab);
++}
++
++static void __exit msm_bus_exit(void)
++{
++	bus_unregister(&msm_bus_type);
++}
++
++static int __init msm_bus_init(void)
++{
++	int retval = 0;
++	retval = bus_register(&msm_bus_type);
++	if (retval)
++		MSM_BUS_ERR("bus_register error! %d\n",
++			retval);
++	return retval;
++}
++postcore_initcall(msm_bus_init);
++module_exit(msm_bus_exit);
++MODULE_LICENSE("GPL v2");
++MODULE_VERSION("0.2");
++MODULE_ALIAS("platform:msm_bus");
+--- /dev/null
++++ b/drivers/bus/msm_bus/msm_bus_core.h
+@@ -0,0 +1,375 @@
++/* Copyright (c) 2011-2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++
++#ifndef _ARCH_ARM_MACH_MSM_BUS_CORE_H
++#define _ARCH_ARM_MACH_MSM_BUS_CORE_H
++
++#include <linux/types.h>
++#include <linux/device.h>
++#include <linux/radix-tree.h>
++#include <linux/platform_device.h>
++#include "msm-bus-board.h"
++#include "msm-bus.h"
++
++#define MSM_BUS_DBG(msg, ...) \
++	pr_debug(msg, ## __VA_ARGS__)
++#define MSM_BUS_ERR(msg, ...) \
++	pr_err(msg, ## __VA_ARGS__)
++#define MSM_BUS_WARN(msg, ...) \
++	pr_warn(msg, ## __VA_ARGS__)
++#define MSM_FAB_ERR(msg, ...) \
++	dev_err(&fabric->fabdev.dev, msg, ## __VA_ARGS__)
++
++#define IS_MASTER_VALID(mas) \
++	(((mas >= MSM_BUS_MASTER_FIRST) && (mas <= MSM_BUS_MASTER_LAST)) \
++	 ? 1 : 0)
++#define IS_SLAVE_VALID(slv) \
++	(((slv >= MSM_BUS_SLAVE_FIRST) && (slv <= MSM_BUS_SLAVE_LAST)) ? 1 : 0)
++
++#define INTERLEAVED_BW(fab_pdata, bw, ports) \
++	((fab_pdata->il_flag) ? ((bw < 0) \
++	? -msm_bus_div64((ports), (-bw)) : msm_bus_div64((ports), (bw))) : (bw))
++#define INTERLEAVED_VAL(fab_pdata, n) \
++	((fab_pdata->il_flag) ? (n) : 1)
++#define KBTOB(a) (a * 1000ULL)
++
++enum msm_bus_dbg_op_type {
++	MSM_BUS_DBG_UNREGISTER = -2,
++	MSM_BUS_DBG_REGISTER,
++	MSM_BUS_DBG_OP = 1,
++};
++
++enum msm_bus_hw_sel {
++	MSM_BUS_RPM = 0,
++	MSM_BUS_NOC,
++	MSM_BUS_BIMC,
++};
++
++struct msm_bus_arb_ops {
++	uint32_t (*register_client)(struct msm_bus_scale_pdata *pdata);
++	int (*update_request)(uint32_t cl, unsigned int index);
++	void (*unregister_client)(uint32_t cl);
++};
++
++enum {
++	SLAVE_NODE,
++	MASTER_NODE,
++	CLK_NODE,
++	NR_LIM_NODE,
++};
++
++
++extern struct bus_type msm_bus_type;
++extern struct msm_bus_arb_ops arb_ops;
++extern void msm_bus_arb_setops_legacy(struct msm_bus_arb_ops *arb_ops);
++
++struct msm_bus_node_info {
++	unsigned int id;
++	unsigned int priv_id;
++	unsigned int mas_hw_id;
++	unsigned int slv_hw_id;
++	int gateway;
++	int *masterp;
++	int *qport;
++	int num_mports;
++	int *slavep;
++	int num_sports;
++	int *tier;
++	int num_tiers;
++	int ahb;
++	int hw_sel;
++	const char *slaveclk[NUM_CTX];
++	const char *memclk[NUM_CTX];
++	const char *iface_clk_node;
++	unsigned int buswidth;
++	unsigned int ws;
++	unsigned int mode;
++	unsigned int perm_mode;
++	unsigned int prio_lvl;
++	unsigned int prio_rd;
++	unsigned int prio_wr;
++	unsigned int prio1;
++	unsigned int prio0;
++	unsigned int num_thresh;
++	u64 *th;
++	u64 cur_lim_bw;
++	unsigned int mode_thresh;
++	bool dual_conf;
++	u64 *bimc_bw;
++	bool nr_lim;
++	u32 ff;
++	bool rt_mas;
++	u32 bimc_gp;
++	u32 bimc_thmp;
++	u64 floor_bw;
++	const char *name;
++};
++
++struct path_node {
++	uint64_t clk[NUM_CTX];
++	uint64_t bw[NUM_CTX];
++	uint64_t *sel_clk;
++	uint64_t *sel_bw;
++	int next;
++};
++
++struct msm_bus_link_info {
++	uint64_t clk[NUM_CTX];
++	uint64_t *sel_clk;
++	uint64_t memclk;
++	int64_t bw[NUM_CTX];
++	int64_t *sel_bw;
++	int *tier;
++	int num_tiers;
++};
++
++struct nodeclk {
++	struct clk *clk;
++	uint64_t rate;
++	bool dirty;
++	bool enable;
++};
++
++struct msm_bus_inode_info {
++	struct msm_bus_node_info *node_info;
++	uint64_t max_bw;
++	uint64_t max_clk;
++	uint64_t cur_lim_bw;
++	uint64_t cur_prg_bw;
++	struct msm_bus_link_info link_info;
++	int num_pnodes;
++	struct path_node *pnode;
++	int commit_index;
++	struct nodeclk nodeclk[NUM_CTX];
++	struct nodeclk memclk[NUM_CTX];
++	struct nodeclk iface_clk;
++	void *hw_data;
++};
++
++struct msm_bus_node_hw_info {
++	bool dirty;
++	unsigned int hw_id;
++	uint64_t bw;
++};
++
++struct msm_bus_hw_algorithm {
++	int (*allocate_commit_data)(struct msm_bus_fabric_registration
++		*fab_pdata, void **cdata, int ctx);
++	void *(*allocate_hw_data)(struct platform_device *pdev,
++		struct msm_bus_fabric_registration *fab_pdata);
++	void (*node_init)(void *hw_data, struct msm_bus_inode_info *info);
++	void (*free_commit_data)(void *cdata);
++	void (*update_bw)(struct msm_bus_inode_info *hop,
++		struct msm_bus_inode_info *info,
++		struct msm_bus_fabric_registration *fab_pdata,
++		void *sel_cdata, int *master_tiers,
++		int64_t add_bw);
++	void (*fill_cdata_buffer)(int *curr, char *buf, const int max_size,
++		void *cdata, int nmasters, int nslaves, int ntslaves);
++	int (*commit)(struct msm_bus_fabric_registration
++		*fab_pdata, void *hw_data, void **cdata);
++	int (*port_unhalt)(uint32_t haltid, uint8_t mport);
++	int (*port_halt)(uint32_t haltid, uint8_t mport);
++	void (*config_master)(struct msm_bus_fabric_registration *fab_pdata,
++		struct msm_bus_inode_info *info,
++		uint64_t req_clk, uint64_t req_bw);
++	void (*config_limiter)(struct msm_bus_fabric_registration *fab_pdata,
++		struct msm_bus_inode_info *info);
++	bool (*update_bw_reg)(int mode);
++};
++
++struct msm_bus_fabric_device {
++	int id;
++	const char *name;
++	struct device dev;
++	const struct msm_bus_fab_algorithm *algo;
++	const struct msm_bus_board_algorithm *board_algo;
++	struct msm_bus_hw_algorithm hw_algo;
++	int visited;
++	int num_nr_lim;
++	u64 nr_lim_thresh;
++	u32 eff_fact;
++};
++#define to_msm_bus_fabric_device(d) container_of(d, \
++		struct msm_bus_fabric_device, d)
++
++struct msm_bus_fabric {
++	struct msm_bus_fabric_device fabdev;
++	int ahb;
++	void *cdata[NUM_CTX];
++	bool arb_dirty;
++	bool clk_dirty;
++	struct radix_tree_root fab_tree;
++	int num_nodes;
++	struct list_head gateways;
++	struct msm_bus_inode_info info;
++	struct msm_bus_fabric_registration *pdata;
++	void *hw_data;
++};
++#define to_msm_bus_fabric(d) container_of(d, \
++	struct msm_bus_fabric, d)
++
++
++struct msm_bus_fab_algorithm {
++	int (*update_clks)(struct msm_bus_fabric_device *fabdev,
++		struct msm_bus_inode_info *pme, int index,
++		uint64_t curr_clk, uint64_t req_clk,
++		uint64_t bwsum, int flag, int ctx,
++		unsigned int cl_active_flag);
++	int (*port_halt)(struct msm_bus_fabric_device *fabdev, int portid);
++	int (*port_unhalt)(struct msm_bus_fabric_device *fabdev, int portid);
++	int (*commit)(struct msm_bus_fabric_device *fabdev);
++	struct msm_bus_inode_info *(*find_node)(struct msm_bus_fabric_device
++		*fabdev, int id);
++	struct msm_bus_inode_info *(*find_gw_node)(struct msm_bus_fabric_device
++		*fabdev, int id);
++	struct list_head *(*get_gw_list)(struct msm_bus_fabric_device *fabdev);
++	void (*update_bw)(struct msm_bus_fabric_device *fabdev, struct
++		msm_bus_inode_info * hop, struct msm_bus_inode_info *info,
++		int64_t add_bw, int *master_tiers, int ctx);
++	void (*config_master)(struct msm_bus_fabric_device *fabdev,
++		struct msm_bus_inode_info *info, uint64_t req_clk,
++		uint64_t req_bw);
++	void (*config_limiter)(struct msm_bus_fabric_device *fabdev,
++		struct msm_bus_inode_info *info);
++};
++
++struct msm_bus_board_algorithm {
++	int board_nfab;
++	void (*assign_iids)(struct msm_bus_fabric_registration *fabreg,
++		int fabid);
++	int (*get_iid)(int id);
++};
++
++/**
++ * Used to store the list of fabrics and other info to be
++ * maintained outside the fabric structure.
++ * Used while calculating path, and to find fabric ptrs
++ */
++struct msm_bus_fabnodeinfo {
++	struct list_head list;
++	struct msm_bus_inode_info *info;
++};
++
++struct msm_bus_client {
++	int id;
++	struct msm_bus_scale_pdata *pdata;
++	int *src_pnode;
++	int curr;
++};
++
++uint64_t msm_bus_div64(unsigned int width, uint64_t bw);
++int msm_bus_fabric_device_register(struct msm_bus_fabric_device *fabric);
++void msm_bus_fabric_device_unregister(struct msm_bus_fabric_device *fabric);
++struct msm_bus_fabric_device *msm_bus_get_fabric_device(int fabid);
++int msm_bus_get_num_fab(void);
++
++
++int msm_bus_hw_fab_init(struct msm_bus_fabric_registration *pdata,
++	struct msm_bus_hw_algorithm *hw_algo);
++void msm_bus_board_init(struct msm_bus_fabric_registration *pdata);
++void msm_bus_board_set_nfab(struct msm_bus_fabric_registration *pdata,
++	int nfab);
++#if defined(CONFIG_MSM_RPM_SMD)
++int msm_bus_rpm_hw_init(struct msm_bus_fabric_registration *pdata,
++	struct msm_bus_hw_algorithm *hw_algo);
++int msm_bus_remote_hw_commit(struct msm_bus_fabric_registration
++	*fab_pdata, void *hw_data, void **cdata);
++void msm_bus_rpm_fill_cdata_buffer(int *curr, char *buf, const int max_size,
++	void *cdata, int nmasters, int nslaves, int ntslaves);
++#else
++static inline int msm_bus_rpm_hw_init(struct msm_bus_fabric_registration *pdata,
++	struct msm_bus_hw_algorithm *hw_algo)
++{
++	return 0;
++}
++static inline int msm_bus_remote_hw_commit(struct msm_bus_fabric_registration
++	*fab_pdata, void *hw_data, void **cdata)
++{
++	return 0;
++}
++static inline void msm_bus_rpm_fill_cdata_buffer(int *curr, char *buf,
++	const int max_size, void *cdata, int nmasters, int nslaves,
++	int ntslaves)
++{
++}
++#endif
++
++int msm_bus_noc_hw_init(struct msm_bus_fabric_registration *pdata,
++	struct msm_bus_hw_algorithm *hw_algo);
++int msm_bus_bimc_hw_init(struct msm_bus_fabric_registration *pdata,
++	struct msm_bus_hw_algorithm *hw_algo);
++#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_MSM_BUS_SCALING)
++void msm_bus_dbg_client_data(struct msm_bus_scale_pdata *pdata, int index,
++	uint32_t cl);
++void msm_bus_dbg_commit_data(const char *fabname, void *cdata,
++	int nmasters, int nslaves, int ntslaves, int op);
++#else
++static inline void msm_bus_dbg_client_data(struct msm_bus_scale_pdata *pdata,
++	int index, uint32_t cl)
++{
++}
++static inline void msm_bus_dbg_commit_data(const char *fabname,
++	void *cdata, int nmasters, int nslaves, int ntslaves,
++	int op)
++{
++}
++#endif
++
++#ifdef CONFIG_CORESIGHT
++int msmbus_coresight_init(struct platform_device *pdev);
++void msmbus_coresight_remove(struct platform_device *pdev);
++int msmbus_coresight_init_adhoc(struct platform_device *pdev,
++		struct device_node *of_node);
++void msmbus_coresight_remove_adhoc(struct platform_device *pdev);
++#else
++static inline int msmbus_coresight_init(struct platform_device *pdev)
++{
++	return 0;
++}
++
++static inline void msmbus_coresight_remove(struct platform_device *pdev)
++{
++}
++
++static inline int msmbus_coresight_init_adhoc(struct platform_device *pdev,
++		struct device_node *of_node)
++{
++	return 0;
++}
++
++static inline void msmbus_coresight_remove_adhoc(struct platform_device *pdev)
++{
++}
++#endif
++
++
++#ifdef CONFIG_OF
++void msm_bus_of_get_nfab(struct platform_device *pdev,
++		struct msm_bus_fabric_registration *pdata);
++struct msm_bus_fabric_registration
++	*msm_bus_of_get_fab_data(struct platform_device *pdev);
++#else
++static inline void msm_bus_of_get_nfab(struct platform_device *pdev,
++		struct msm_bus_fabric_registration *pdata)
++{
++	return;
++}
++
++static inline struct msm_bus_fabric_registration
++	*msm_bus_of_get_fab_data(struct platform_device *pdev)
++{
++	return NULL;
++}
++#endif
++
++#endif /*_ARCH_ARM_MACH_MSM_BUS_CORE_H*/
+--- /dev/null
++++ b/drivers/bus/msm_bus/msm_bus_dbg.c
+@@ -0,0 +1,810 @@
++/* Copyright (c) 2010-2012, 2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ */
++
++#define pr_fmt(fmt) "AXI: %s(): " fmt, __func__
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/seq_file.h>
++#include <linux/debugfs.h>
++#include <linux/slab.h>
++#include <linux/mutex.h>
++#include <linux/string.h>
++#include <linux/uaccess.h>
++#include <linux/hrtimer.h>
++#include "msm-bus-board.h"
++#include "msm-bus.h"
++#include "msm_bus_rules.h"
++#include "msm_bus_core.h"
++#include "msm_bus_adhoc.h"
++
++#define CREATE_TRACE_POINTS
++#include <trace/events/trace_msm_bus.h>
++
++#define MAX_BUFF_SIZE 4096
++#define FILL_LIMIT 128
++
++static struct dentry *clients;
++static struct dentry *dir;
++static DEFINE_MUTEX(msm_bus_dbg_fablist_lock);
++struct msm_bus_dbg_state {
++	uint32_t cl;
++	uint8_t enable;
++	uint8_t current_index;
++} clstate;
++
++struct msm_bus_cldata {
++	const struct msm_bus_scale_pdata *pdata;
++	int index;
++	uint32_t clid;
++	int size;
++	struct dentry *file;
++	struct list_head list;
++	char buffer[MAX_BUFF_SIZE];
++};
++
++struct msm_bus_fab_list {
++	const char *name;
++	int size;
++	struct dentry *file;
++	struct list_head list;
++	char buffer[MAX_BUFF_SIZE];
++};
++
++static char *rules_buf;
++
++LIST_HEAD(fabdata_list);
++LIST_HEAD(cl_list);
++
++/**
++ * The following structures and funtions are used for
++ * the test-client which can be created at run-time.
++ */
++
++static struct msm_bus_vectors init_vectors[1];
++static struct msm_bus_vectors current_vectors[1];
++static struct msm_bus_vectors requested_vectors[1];
++
++static struct msm_bus_paths shell_client_usecases[] = {
++	{
++		.num_paths = ARRAY_SIZE(init_vectors),
++		.vectors = init_vectors,
++	},
++	{
++		.num_paths = ARRAY_SIZE(current_vectors),
++		.vectors = current_vectors,
++	},
++	{
++		.num_paths = ARRAY_SIZE(requested_vectors),
++		.vectors = requested_vectors,
++	},
++};
++
++static struct msm_bus_scale_pdata shell_client = {
++	.usecase = shell_client_usecases,
++	.num_usecases = ARRAY_SIZE(shell_client_usecases),
++	.name = "test-client",
++};
++
++static void msm_bus_dbg_init_vectors(void)
++{
++	init_vectors[0].src = -1;
++	init_vectors[0].dst = -1;
++	init_vectors[0].ab = 0;
++	init_vectors[0].ib = 0;
++	current_vectors[0].src = -1;
++	current_vectors[0].dst = -1;
++	current_vectors[0].ab = 0;
++	current_vectors[0].ib = 0;
++	requested_vectors[0].src = -1;
++	requested_vectors[0].dst = -1;
++	requested_vectors[0].ab = 0;
++	requested_vectors[0].ib = 0;
++	clstate.enable = 0;
++	clstate.current_index = 0;
++}
++
++static int msm_bus_dbg_update_cl_request(uint32_t cl)
++{
++	int ret = 0;
++
++	if (clstate.current_index < 2)
++		clstate.current_index = 2;
++	else {
++		clstate.current_index = 1;
++		current_vectors[0].ab = requested_vectors[0].ab;
++		current_vectors[0].ib = requested_vectors[0].ib;
++	}
++
++	if (clstate.enable) {
++		MSM_BUS_DBG("Updating request for shell client, index: %d\n",
++			clstate.current_index);
++		ret = msm_bus_scale_client_update_request(clstate.cl,
++			clstate.current_index);
++	} else
++		MSM_BUS_DBG("Enable bit not set. Skipping update request\n");
++
++	return ret;
++}
++
++static void msm_bus_dbg_unregister_client(uint32_t cl)
++{
++	MSM_BUS_DBG("Unregistering shell client\n");
++	msm_bus_scale_unregister_client(clstate.cl);
++	clstate.cl = 0;
++}
++
++static uint32_t msm_bus_dbg_register_client(void)
++{
++	int ret = 0;
++
++	if (init_vectors[0].src != requested_vectors[0].src) {
++		MSM_BUS_DBG("Shell client master changed. Unregistering\n");
++		msm_bus_dbg_unregister_client(clstate.cl);
++	}
++	if (init_vectors[0].dst != requested_vectors[0].dst) {
++		MSM_BUS_DBG("Shell client slave changed. Unregistering\n");
++		msm_bus_dbg_unregister_client(clstate.cl);
++	}
++
++	current_vectors[0].src = init_vectors[0].src;
++	requested_vectors[0].src = init_vectors[0].src;
++	current_vectors[0].dst = init_vectors[0].dst;
++	requested_vectors[0].dst = init_vectors[0].dst;
++
++	if (!clstate.enable) {
++		MSM_BUS_DBG("Enable bit not set, skipping registration: cl "
++			"%d\n",	clstate.cl);
++		return 0;
++	}
++
++	if (clstate.cl) {
++		MSM_BUS_DBG("Client  registered, skipping registration\n");
++		return clstate.cl;
++	}
++
++	MSM_BUS_DBG("Registering shell client\n");
++	ret = msm_bus_scale_register_client(&shell_client);
++	return ret;
++}
++
++static int msm_bus_dbg_mas_get(void  *data, u64 *val)
++{
++	*val = init_vectors[0].src;
++	MSM_BUS_DBG("Get master: %llu\n", *val);
++	return 0;
++}
++
++static int msm_bus_dbg_mas_set(void  *data, u64 val)
++{
++	init_vectors[0].src = val;
++	MSM_BUS_DBG("Set master: %llu\n", val);
++	clstate.cl = msm_bus_dbg_register_client();
++	return 0;
++}
++DEFINE_SIMPLE_ATTRIBUTE(shell_client_mas_fops, msm_bus_dbg_mas_get,
++	msm_bus_dbg_mas_set, "%llu\n");
++
++static int msm_bus_dbg_slv_get(void  *data, u64 *val)
++{
++	*val = init_vectors[0].dst;
++	MSM_BUS_DBG("Get slave: %llu\n", *val);
++	return 0;
++}
++
++static int msm_bus_dbg_slv_set(void  *data, u64 val)
++{
++	init_vectors[0].dst = val;
++	MSM_BUS_DBG("Set slave: %llu\n", val);
++	clstate.cl = msm_bus_dbg_register_client();
++	return 0;
++}
++DEFINE_SIMPLE_ATTRIBUTE(shell_client_slv_fops, msm_bus_dbg_slv_get,
++	msm_bus_dbg_slv_set, "%llu\n");
++
++static int msm_bus_dbg_ab_get(void  *data, u64 *val)
++{
++	*val = requested_vectors[0].ab;
++	MSM_BUS_DBG("Get ab: %llu\n", *val);
++	return 0;
++}
++
++static int msm_bus_dbg_ab_set(void  *data, u64 val)
++{
++	requested_vectors[0].ab = val;
++	MSM_BUS_DBG("Set ab: %llu\n", val);
++	return 0;
++}
++DEFINE_SIMPLE_ATTRIBUTE(shell_client_ab_fops, msm_bus_dbg_ab_get,
++	msm_bus_dbg_ab_set, "%llu\n");
++
++static int msm_bus_dbg_ib_get(void  *data, u64 *val)
++{
++	*val = requested_vectors[0].ib;
++	MSM_BUS_DBG("Get ib: %llu\n", *val);
++	return 0;
++}
++
++static int msm_bus_dbg_ib_set(void  *data, u64 val)
++{
++	requested_vectors[0].ib = val;
++	MSM_BUS_DBG("Set ib: %llu\n", val);
++	return 0;
++}
++DEFINE_SIMPLE_ATTRIBUTE(shell_client_ib_fops, msm_bus_dbg_ib_get,
++	msm_bus_dbg_ib_set, "%llu\n");
++
++static int msm_bus_dbg_en_get(void  *data, u64 *val)
++{
++	*val = clstate.enable;
++	MSM_BUS_DBG("Get enable: %llu\n", *val);
++	return 0;
++}
++
++static int msm_bus_dbg_en_set(void  *data, u64 val)
++{
++	int ret = 0;
++
++	clstate.enable = val;
++	if (clstate.enable) {
++		if (!clstate.cl) {
++			MSM_BUS_DBG("client: %u\n", clstate.cl);
++			clstate.cl = msm_bus_dbg_register_client();
++			if (clstate.cl)
++				ret = msm_bus_dbg_update_cl_request(clstate.cl);
++		} else {
++			MSM_BUS_DBG("update request for cl: %u\n", clstate.cl);
++			ret = msm_bus_dbg_update_cl_request(clstate.cl);
++		}
++	}
++
++	MSM_BUS_DBG("Set enable: %llu\n", val);
++	return ret;
++}
++DEFINE_SIMPLE_ATTRIBUTE(shell_client_en_fops, msm_bus_dbg_en_get,
++	msm_bus_dbg_en_set, "%llu\n");
++
++/**
++ * The following funtions are used for viewing the client data
++ * and changing the client request at run-time
++ */
++
++static ssize_t client_data_read(struct file *file, char __user *buf,
++	size_t count, loff_t *ppos)
++{
++	int bsize = 0;
++	uint32_t cl = (uint32_t)(uintptr_t)file->private_data;
++	struct msm_bus_cldata *cldata = NULL;
++	int found = 0;
++
++	list_for_each_entry(cldata, &cl_list, list) {
++		if (cldata->clid == cl) {
++			found = 1;
++			break;
++		}
++	}
++	if (!found)
++		return 0;
++
++	bsize = cldata->size;
++	return simple_read_from_buffer(buf, count, ppos,
++		cldata->buffer, bsize);
++}
++
++static int client_data_open(struct inode *inode, struct file *file)
++{
++	file->private_data = inode->i_private;
++	return 0;
++}
++
++static const struct file_operations client_data_fops = {
++	.open		= client_data_open,
++	.read		= client_data_read,
++};
++
++struct dentry *msm_bus_dbg_create(const char *name, mode_t mode,
++	struct dentry *dent, uint32_t clid)
++{
++	if (dent == NULL) {
++		MSM_BUS_DBG("debugfs not ready yet\n");
++		return NULL;
++	}
++	return debugfs_create_file(name, mode, dent, (void *)(uintptr_t)clid,
++		&client_data_fops);
++}
++
++#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_MSM_BUS_SCALING)
++static int msm_bus_dbg_record_client(const struct msm_bus_scale_pdata *pdata,
++	int index, uint32_t clid, struct dentry *file)
++{
++	struct msm_bus_cldata *cldata;
++
++	cldata = kmalloc(sizeof(struct msm_bus_cldata), GFP_KERNEL);
++	if (!cldata) {
++		MSM_BUS_DBG("Failed to allocate memory for client data\n");
++		return -ENOMEM;
++	}
++	cldata->pdata = pdata;
++	cldata->index = index;
++	cldata->clid = clid;
++	cldata->file = file;
++	cldata->size = 0;
++	list_add_tail(&cldata->list, &cl_list);
++	return 0;
++}
++
++static void msm_bus_dbg_free_client(uint32_t clid)
++{
++	struct msm_bus_cldata *cldata = NULL;
++
++	list_for_each_entry(cldata, &cl_list, list) {
++		if (cldata->clid == clid) {
++			debugfs_remove(cldata->file);
++			list_del(&cldata->list);
++			kfree(cldata);
++			break;
++		}
++	}
++}
++
++static int msm_bus_dbg_fill_cl_buffer(const struct msm_bus_scale_pdata *pdata,
++	int index, uint32_t clid)
++{
++	int i = 0, j;
++	char *buf = NULL;
++	struct msm_bus_cldata *cldata = NULL;
++	struct timespec ts;
++	int found = 0;
++
++	list_for_each_entry(cldata, &cl_list, list) {
++		if (cldata->clid == clid) {
++			found = 1;
++			break;
++		}
++	}
++
++	if (!found)
++		return -ENOENT;
++
++	if (cldata->file == NULL) {
++		if (pdata->name == NULL) {
++			MSM_BUS_DBG("Client doesn't have a name\n");
++			return -EINVAL;
++		}
++		cldata->file = msm_bus_dbg_create(pdata->name, S_IRUGO,
++			clients, clid);
++	}
++
++	if (cldata->size < (MAX_BUFF_SIZE - FILL_LIMIT))
++		i = cldata->size;
++	else {
++		i = 0;
++		cldata->size = 0;
++	}
++	buf = cldata->buffer;
++	ts = ktime_to_timespec(ktime_get());
++	i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "\n%d.%d\n",
++		(int)ts.tv_sec, (int)ts.tv_nsec);
++	i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "curr   : %d\n", index);
++	i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "masters: ");
++
++	for (j = 0; j < pdata->usecase->num_paths; j++)
++		i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "%d  ",
++			pdata->usecase[index].vectors[j].src);
++	i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "\nslaves : ");
++	for (j = 0; j < pdata->usecase->num_paths; j++)
++		i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "%d  ",
++			pdata->usecase[index].vectors[j].dst);
++	i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "\nab     : ");
++	for (j = 0; j < pdata->usecase->num_paths; j++)
++		i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "%llu  ",
++			pdata->usecase[index].vectors[j].ab);
++	i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "\nib     : ");
++	for (j = 0; j < pdata->usecase->num_paths; j++)
++		i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "%llu  ",
++			pdata->usecase[index].vectors[j].ib);
++	i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "\n");
++
++	for (j = 0; j < pdata->usecase->num_paths; j++)
++		trace_bus_update_request((int)ts.tv_sec, (int)ts.tv_nsec,
++		pdata->name, index,
++		pdata->usecase[index].vectors[j].src,
++		pdata->usecase[index].vectors[j].dst,
++		pdata->usecase[index].vectors[j].ab,
++		pdata->usecase[index].vectors[j].ib);
++
++	cldata->size = i;
++	return i;
++}
++#endif
++
++static int msm_bus_dbg_update_request(struct msm_bus_cldata *cldata, int index)
++{
++	int ret = 0;
++
++	if ((index < 0) || (index > cldata->pdata->num_usecases)) {
++		MSM_BUS_DBG("Invalid index!\n");
++		return -EINVAL;
++	}
++	ret = msm_bus_scale_client_update_request(cldata->clid, index);
++	return ret;
++}
++
++static ssize_t  msm_bus_dbg_update_request_write(struct file *file,
++	const char __user *ubuf, size_t cnt, loff_t *ppos)
++{
++	struct msm_bus_cldata *cldata;
++	unsigned long index = 0;
++	int ret = 0;
++	char *chid;
++	char *buf = kmalloc((sizeof(char) * (cnt + 1)), GFP_KERNEL);
++	int found = 0;
++
++	if (!buf || IS_ERR(buf)) {
++		MSM_BUS_ERR("Memory allocation for buffer failed\n");
++		return -ENOMEM;
++	}
++	if (cnt == 0) {
++		kfree(buf);
++		return 0;
++	}
++	if (copy_from_user(buf, ubuf, cnt)) {
++		kfree(buf);
++		return -EFAULT;
++	}
++	buf[cnt] = '\0';
++	chid = buf;
++	MSM_BUS_DBG("buffer: %s\n size: %zu\n", buf, sizeof(ubuf));
++
++	list_for_each_entry(cldata, &cl_list, list) {
++		if (strnstr(chid, cldata->pdata->name, cnt)) {
++			found = 1;
++			cldata = cldata;
++			strsep(&chid, " ");
++			if (chid) {
++				ret = kstrtoul(chid, 10, &index);
++				if (ret) {
++					MSM_BUS_DBG("Index conversion"
++						" failed\n");
++					return -EFAULT;
++				}
++			} else {
++				MSM_BUS_DBG("Error parsing input. Index not"
++					" found\n");
++				found = 0;
++			}
++			break;
++		}
++	}
++
++	if (found)
++		msm_bus_dbg_update_request(cldata, index);
++	kfree(buf);
++	return cnt;
++}
++
++/**
++ * The following funtions are used for viewing the commit data
++ * for each fabric
++ */
++static ssize_t fabric_data_read(struct file *file, char __user *buf,
++	size_t count, loff_t *ppos)
++{
++	struct msm_bus_fab_list *fablist = NULL;
++	int bsize = 0;
++	ssize_t ret;
++	const char *name = file->private_data;
++	int found = 0;
++
++	mutex_lock(&msm_bus_dbg_fablist_lock);
++	list_for_each_entry(fablist, &fabdata_list, list) {
++		if (strcmp(fablist->name, name) == 0) {
++			found = 1;
++			break;
++		}
++	}
++	if (!found)
++		return -ENOENT;
++	bsize = fablist->size;
++	ret = simple_read_from_buffer(buf, count, ppos,
++		fablist->buffer, bsize);
++	mutex_unlock(&msm_bus_dbg_fablist_lock);
++	return ret;
++}
++
++static const struct file_operations fabric_data_fops = {
++	.open		= client_data_open,
++	.read		= fabric_data_read,
++};
++
++static ssize_t rules_dbg_read(struct file *file, char __user *buf,
++	size_t count, loff_t *ppos)
++{
++	ssize_t ret;
++	memset(rules_buf, 0, MAX_BUFF_SIZE);
++	print_rules_buf(rules_buf, MAX_BUFF_SIZE);
++	ret = simple_read_from_buffer(buf, count, ppos,
++		rules_buf, MAX_BUFF_SIZE);
++	return ret;
++}
++
++static int rules_dbg_open(struct inode *inode, struct file *file)
++{
++	file->private_data = inode->i_private;
++	return 0;
++}
++
++static const struct file_operations rules_dbg_fops = {
++	.open		= rules_dbg_open,
++	.read		= rules_dbg_read,
++};
++
++#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_MSM_BUS_SCALING)
++static int msm_bus_dbg_record_fabric(const char *fabname, struct dentry *file)
++{
++	struct msm_bus_fab_list *fablist;
++	int ret = 0;
++
++	mutex_lock(&msm_bus_dbg_fablist_lock);
++	fablist = kmalloc(sizeof(struct msm_bus_fab_list), GFP_KERNEL);
++	if (!fablist) {
++		MSM_BUS_DBG("Failed to allocate memory for commit data\n");
++		ret =  -ENOMEM;
++		goto err;
++	}
++
++	fablist->name = fabname;
++	fablist->size = 0;
++	list_add_tail(&fablist->list, &fabdata_list);
++err:
++	mutex_unlock(&msm_bus_dbg_fablist_lock);
++	return ret;
++}
++
++static void msm_bus_dbg_free_fabric(const char *fabname)
++{
++	struct msm_bus_fab_list *fablist = NULL;
++
++	mutex_lock(&msm_bus_dbg_fablist_lock);
++	list_for_each_entry(fablist, &fabdata_list, list) {
++		if (strcmp(fablist->name, fabname) == 0) {
++			debugfs_remove(fablist->file);
++			list_del(&fablist->list);
++			kfree(fablist);
++			break;
++		}
++	}
++	mutex_unlock(&msm_bus_dbg_fablist_lock);
++}
++
++static int msm_bus_dbg_fill_fab_buffer(const char *fabname,
++	void *cdata, int nmasters, int nslaves,
++	int ntslaves)
++{
++	int i;
++	char *buf = NULL;
++	struct msm_bus_fab_list *fablist = NULL;
++	struct timespec ts;
++	int found = 0;
++
++	mutex_lock(&msm_bus_dbg_fablist_lock);
++	list_for_each_entry(fablist, &fabdata_list, list) {
++		if (strcmp(fablist->name, fabname) == 0) {
++			found = 1;
++			break;
++		}
++	}
++	if (!found)
++		return -ENOENT;
++
++	if (fablist->file == NULL) {
++		MSM_BUS_DBG("Fabric dbg entry does not exist\n");
++		mutex_unlock(&msm_bus_dbg_fablist_lock);
++		return -EFAULT;
++	}
++
++	if (fablist->size < MAX_BUFF_SIZE - 256)
++		i = fablist->size;
++	else {
++		i = 0;
++		fablist->size = 0;
++	}
++	buf = fablist->buffer;
++	mutex_unlock(&msm_bus_dbg_fablist_lock);
++	ts = ktime_to_timespec(ktime_get());
++	i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "\n%d.%d\n",
++		(int)ts.tv_sec, (int)ts.tv_nsec);
++
++	msm_bus_rpm_fill_cdata_buffer(&i, buf, MAX_BUFF_SIZE, cdata,
++		nmasters, nslaves, ntslaves);
++	i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "\n");
++	mutex_lock(&msm_bus_dbg_fablist_lock);
++	fablist->size = i;
++	mutex_unlock(&msm_bus_dbg_fablist_lock);
++	return 0;
++}
++#endif
++
++static const struct file_operations msm_bus_dbg_update_request_fops = {
++	.open = client_data_open,
++	.write = msm_bus_dbg_update_request_write,
++};
++
++#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_MSM_BUS_SCALING)
++/**
++ * msm_bus_dbg_client_data() - Add debug data for clients
++ * @pdata: Platform data of the client
++ * @index: The current index or operation to be performed
++ * @clid: Client handle obtained during registration
++ */
++void msm_bus_dbg_client_data(struct msm_bus_scale_pdata *pdata, int index,
++	uint32_t clid)
++{
++	struct dentry *file = NULL;
++
++	if (index == MSM_BUS_DBG_REGISTER) {
++		msm_bus_dbg_record_client(pdata, index, clid, file);
++		if (!pdata->name) {
++			MSM_BUS_DBG("Cannot create debugfs entry. Null name\n");
++			return;
++		}
++	} else if (index == MSM_BUS_DBG_UNREGISTER) {
++		msm_bus_dbg_free_client(clid);
++		MSM_BUS_DBG("Client %d unregistered\n", clid);
++	} else
++		msm_bus_dbg_fill_cl_buffer(pdata, index, clid);
++}
++EXPORT_SYMBOL(msm_bus_dbg_client_data);
++
++/**
++ * msm_bus_dbg_commit_data() - Add commit data from fabrics
++ * @fabname: Fabric name specified in platform data
++ * @cdata: Commit Data
++ * @nmasters: Number of masters attached to fabric
++ * @nslaves: Number of slaves attached to fabric
++ * @ntslaves: Number of tiered slaves attached to fabric
++ * @op: Operation to be performed
++ */
++void msm_bus_dbg_commit_data(const char *fabname, void *cdata,
++	int nmasters, int nslaves, int ntslaves, int op)
++{
++	struct dentry *file = NULL;
++
++	if (op == MSM_BUS_DBG_REGISTER)
++		msm_bus_dbg_record_fabric(fabname, file);
++	else if (op == MSM_BUS_DBG_UNREGISTER)
++		msm_bus_dbg_free_fabric(fabname);
++	else
++		msm_bus_dbg_fill_fab_buffer(fabname, cdata, nmasters,
++			nslaves, ntslaves);
++}
++EXPORT_SYMBOL(msm_bus_dbg_commit_data);
++#endif
++
++static int __init msm_bus_debugfs_init(void)
++{
++	struct dentry *commit, *shell_client, *rules_dbg;
++	struct msm_bus_fab_list *fablist;
++	struct msm_bus_cldata *cldata = NULL;
++	uint64_t val = 0;
++
++	dir = debugfs_create_dir("msm-bus-dbg", NULL);
++	if ((!dir) || IS_ERR(dir)) {
++		MSM_BUS_ERR("Couldn't create msm-bus-dbg\n");
++		goto err;
++	}
++
++	clients = debugfs_create_dir("client-data", dir);
++	if ((!dir) || IS_ERR(dir)) {
++		MSM_BUS_ERR("Couldn't create clients\n");
++		goto err;
++	}
++
++	shell_client = debugfs_create_dir("shell-client", dir);
++	if ((!dir) || IS_ERR(dir)) {
++		MSM_BUS_ERR("Couldn't create clients\n");
++		goto err;
++	}
++
++	commit = debugfs_create_dir("commit-data", dir);
++	if ((!dir) || IS_ERR(dir)) {
++		MSM_BUS_ERR("Couldn't create commit\n");
++		goto err;
++	}
++
++	rules_dbg = debugfs_create_dir("rules-dbg", dir);
++	if ((!rules_dbg) || IS_ERR(rules_dbg)) {
++		MSM_BUS_ERR("Couldn't create rules-dbg\n");
++		goto err;
++	}
++
++	if (debugfs_create_file("print_rules", S_IRUGO | S_IWUSR,
++		rules_dbg, &val, &rules_dbg_fops) == NULL)
++		goto err;
++
++	if (debugfs_create_file("update_request", S_IRUGO | S_IWUSR,
++		shell_client, &val, &shell_client_en_fops) == NULL)
++		goto err;
++	if (debugfs_create_file("ib", S_IRUGO | S_IWUSR, shell_client, &val,
++		&shell_client_ib_fops) == NULL)
++		goto err;
++	if (debugfs_create_file("ab", S_IRUGO | S_IWUSR, shell_client, &val,
++		&shell_client_ab_fops) == NULL)
++		goto err;
++	if (debugfs_create_file("slv", S_IRUGO | S_IWUSR, shell_client,
++		&val, &shell_client_slv_fops) == NULL)
++		goto err;
++	if (debugfs_create_file("mas", S_IRUGO | S_IWUSR, shell_client,
++		&val, &shell_client_mas_fops) == NULL)
++		goto err;
++	if (debugfs_create_file("update-request", S_IRUGO | S_IWUSR,
++		clients, NULL, &msm_bus_dbg_update_request_fops) == NULL)
++		goto err;
++
++	rules_buf = kzalloc(MAX_BUFF_SIZE, GFP_KERNEL);
++	if (!rules_buf) {
++		MSM_BUS_ERR("Failed to alloc rules_buf");
++		goto err;
++	}
++
++	list_for_each_entry(cldata, &cl_list, list) {
++		if (cldata->pdata->name == NULL) {
++			MSM_BUS_DBG("Client name not found\n");
++			continue;
++		}
++		cldata->file = msm_bus_dbg_create(cldata->
++			pdata->name, S_IRUGO, clients, cldata->clid);
++	}
++
++	mutex_lock(&msm_bus_dbg_fablist_lock);
++	list_for_each_entry(fablist, &fabdata_list, list) {
++		fablist->file = debugfs_create_file(fablist->name, S_IRUGO,
++			commit, (void *)fablist->name, &fabric_data_fops);
++		if (fablist->file == NULL) {
++			MSM_BUS_DBG("Cannot create files for commit data\n");
++			kfree(rules_buf);
++			goto err;
++		}
++	}
++	mutex_unlock(&msm_bus_dbg_fablist_lock);
++
++	msm_bus_dbg_init_vectors();
++	return 0;
++err:
++	debugfs_remove_recursive(dir);
++	return -ENODEV;
++}
++late_initcall(msm_bus_debugfs_init);
++
++static void __exit msm_bus_dbg_teardown(void)
++{
++	struct msm_bus_fab_list *fablist = NULL, *fablist_temp;
++	struct msm_bus_cldata *cldata = NULL, *cldata_temp;
++
++	debugfs_remove_recursive(dir);
++	list_for_each_entry_safe(cldata, cldata_temp, &cl_list, list) {
++		list_del(&cldata->list);
++		kfree(cldata);
++	}
++	mutex_lock(&msm_bus_dbg_fablist_lock);
++	list_for_each_entry_safe(fablist, fablist_temp, &fabdata_list, list) {
++		list_del(&fablist->list);
++		kfree(fablist);
++	}
++	kfree(rules_buf);
++	mutex_unlock(&msm_bus_dbg_fablist_lock);
++}
++module_exit(msm_bus_dbg_teardown);
++MODULE_DESCRIPTION("Debugfs for msm bus scaling client");
++MODULE_LICENSE("GPL v2");
++MODULE_AUTHOR("Gagan Mac <gmac@codeaurora.org>");
+--- /dev/null
++++ b/drivers/bus/msm_bus/msm_bus_fabric_adhoc.c
+@@ -0,0 +1,1281 @@
++/* Copyright (c) 2014, Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/clk.h>
++#include <linux/device.h>
++#include <linux/init.h>
++#include <linux/io.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/slab.h>
++#include "rpm-smd.h"
++#include "msm_bus_core.h"
++#include "msm_bus_adhoc.h"
++#include "msm_bus_noc.h"
++#include "msm_bus_bimc.h"
++
++ssize_t vrail_show(struct device *dev, struct device_attribute *attr,
++			  char *buf)
++{
++	struct msm_bus_node_info_type *node_info = NULL;
++	struct msm_bus_node_device_type *bus_node = NULL;
++
++	bus_node = dev->platform_data;
++	if (!bus_node)
++		return -EINVAL;
++	node_info = bus_node->node_info;
++
++	return snprintf(buf, PAGE_SIZE, "%u", node_info->vrail_comp);
++}
++
++ssize_t vrail_store(struct device *dev, struct device_attribute *attr,
++			   const char *buf, size_t count)
++{
++	struct msm_bus_node_info_type *node_info = NULL;
++	struct msm_bus_node_device_type *bus_node = NULL;
++	int ret = 0;
++
++	bus_node = dev->platform_data;
++	if (!bus_node)
++		return -EINVAL;
++	node_info = bus_node->node_info;
++
++	ret = sscanf(buf, "%u", &node_info->vrail_comp);
++	if (ret != 1)
++		return -EINVAL;
++	return count;
++}
++
++DEVICE_ATTR(vrail, 0600, vrail_show, vrail_store);
++
++struct static_rules_type {
++	int num_rules;
++	struct bus_rule_type *rules;
++};
++
++static struct static_rules_type static_rules;
++
++static int enable_nodeclk(struct nodeclk *nclk)
++{
++	int ret = 0;
++
++	if (!nclk->enable) {
++		ret = clk_prepare_enable(nclk->clk);
++
++		if (ret) {
++			MSM_BUS_ERR("%s: failed to enable clk ", __func__);
++			nclk->enable = false;
++		} else
++			nclk->enable = true;
++	}
++	return ret;
++}
++
++static int disable_nodeclk(struct nodeclk *nclk)
++{
++	int ret = 0;
++
++	if (nclk->enable) {
++		clk_disable_unprepare(nclk->clk);
++		nclk->enable = false;
++	}
++	return ret;
++}
++
++static int setrate_nodeclk(struct nodeclk *nclk, long rate)
++{
++	int ret = 0;
++
++	ret = clk_set_rate(nclk->clk, rate);
++
++	if (ret)
++		MSM_BUS_ERR("%s: failed to setrate clk", __func__);
++	return ret;
++}
++
++static int msm_bus_agg_fab_clks(struct device *bus_dev, void *data)
++{
++	struct msm_bus_node_device_type *node = NULL;
++	int ret = 0;
++	int ctx = *(int *)data;
++
++	if (ctx >= NUM_CTX) {
++		MSM_BUS_ERR("%s: Invalid Context %d", __func__, ctx);
++		goto exit_agg_fab_clks;
++	}
++
++	node = bus_dev->platform_data;
++	if (!node) {
++		MSM_BUS_ERR("%s: Can't get device info", __func__);
++		goto exit_agg_fab_clks;
++	}
++
++	if (!node->node_info->is_fab_dev) {
++		struct msm_bus_node_device_type *bus_dev = NULL;
++
++		bus_dev = node->node_info->bus_device->platform_data;
++
++		if (node->cur_clk_hz[ctx] >= bus_dev->cur_clk_hz[ctx])
++			bus_dev->cur_clk_hz[ctx] = node->cur_clk_hz[ctx];
++	}
++
++exit_agg_fab_clks:
++	return ret;
++}
++
++static int msm_bus_reset_fab_clks(struct device *bus_dev, void *data)
++{
++	struct msm_bus_node_device_type *node = NULL;
++	int ret = 0;
++	int ctx = *(int *)data;
++
++	if (ctx >= NUM_CTX) {
++		MSM_BUS_ERR("%s: Invalid Context %d", __func__, ctx);
++		goto exit_reset_fab_clks;
++	}
++
++	node = bus_dev->platform_data;
++	if (!node) {
++		MSM_BUS_ERR("%s: Can't get device info", __func__);
++		goto exit_reset_fab_clks;
++	}
++
++	if (node->node_info->is_fab_dev) {
++		node->cur_clk_hz[ctx] = 0;
++		MSM_BUS_DBG("Resetting for node %d", node->node_info->id);
++	}
++exit_reset_fab_clks:
++	return ret;
++}
++
++
++static int send_rpm_msg(struct device *device)
++{
++	int ret = 0;
++	int ctx;
++	int rsc_type;
++	struct msm_bus_node_device_type *ndev =
++					device->platform_data;
++	struct msm_rpm_kvp rpm_kvp;
++
++	if (!ndev) {
++		MSM_BUS_ERR("%s: Error getting node info.", __func__);
++		ret = -ENODEV;
++		goto exit_send_rpm_msg;
++	}
++
++	rpm_kvp.length = sizeof(uint64_t);
++	rpm_kvp.key = RPM_MASTER_FIELD_BW;
++
++	for (ctx = MSM_RPM_CTX_ACTIVE_SET; ctx <= MSM_RPM_CTX_SLEEP_SET;
++					ctx++) {
++		if (ctx == MSM_RPM_CTX_ACTIVE_SET)
++			rpm_kvp.data =
++			(uint8_t *)&ndev->node_ab.ab[MSM_RPM_CTX_ACTIVE_SET];
++		else {
++			rpm_kvp.data =
++			(uint8_t *) &ndev->node_ab.ab[MSM_RPM_CTX_SLEEP_SET];
++		}
++
++		if (ndev->node_info->mas_rpm_id != -1) {
++			rsc_type = RPM_BUS_MASTER_REQ;
++			ret = msm_rpm_send_message(ctx, rsc_type,
++				ndev->node_info->mas_rpm_id, &rpm_kvp, 1);
++			if (ret) {
++				MSM_BUS_ERR("%s: Failed to send RPM message:",
++						__func__);
++				MSM_BUS_ERR("%s:Node Id %d RPM id %d",
++				__func__, ndev->node_info->id,
++					 ndev->node_info->mas_rpm_id);
++				goto exit_send_rpm_msg;
++			}
++		}
++
++		if (ndev->node_info->slv_rpm_id != -1) {
++			rsc_type = RPM_BUS_SLAVE_REQ;
++			ret = msm_rpm_send_message(ctx, rsc_type,
++				ndev->node_info->slv_rpm_id, &rpm_kvp, 1);
++			if (ret) {
++				MSM_BUS_ERR("%s: Failed to send RPM message:",
++							__func__);
++				MSM_BUS_ERR("%s: Node Id %d RPM id %d",
++				__func__, ndev->node_info->id,
++					ndev->node_info->slv_rpm_id);
++				goto exit_send_rpm_msg;
++			}
++		}
++	}
++exit_send_rpm_msg:
++	return ret;
++}
++
++static int flush_bw_data(struct device *node_device, int ctx)
++{
++	struct msm_bus_node_device_type *node_info;
++	int ret = 0;
++
++	node_info = node_device->platform_data;
++	if (!node_info) {
++		MSM_BUS_ERR("%s: Unable to find bus device for device",
++			__func__);
++		ret = -ENODEV;
++		goto exit_flush_bw_data;
++	}
++
++	if (node_info->node_ab.dirty) {
++		if (node_info->ap_owned) {
++			struct msm_bus_node_device_type *bus_device =
++				node_info->node_info->bus_device->platform_data;
++			struct msm_bus_fab_device_type *fabdev =
++							bus_device->fabdev;
++
++			if (fabdev && fabdev->noc_ops.update_bw_reg &&
++				fabdev->noc_ops.update_bw_reg
++					(node_info->node_info->qos_params.mode))
++				ret = fabdev->noc_ops.set_bw(node_info,
++							fabdev->qos_base,
++							fabdev->base_offset,
++							fabdev->qos_off,
++							fabdev->qos_freq);
++		} else {
++			ret = send_rpm_msg(node_device);
++
++			if (ret)
++				MSM_BUS_ERR("%s: Failed to send RPM msg for%d",
++				__func__, node_info->node_info->id);
++		}
++		node_info->node_ab.dirty = false;
++	}
++
++exit_flush_bw_data:
++	return ret;
++
++}
++
++static int flush_clk_data(struct device *node_device, int ctx)
++{
++	struct msm_bus_node_device_type *node;
++	struct nodeclk *nodeclk = NULL;
++	int ret = 0;
++
++	node = node_device->platform_data;
++	if (!node) {
++		MSM_BUS_ERR("Unable to find bus device");
++		ret = -ENODEV;
++		goto exit_flush_clk_data;
++	}
++
++	nodeclk = &node->clk[ctx];
++	if (node->node_info->is_fab_dev) {
++		if (nodeclk->rate != node->cur_clk_hz[ctx]) {
++			nodeclk->rate = node->cur_clk_hz[ctx];
++			nodeclk->dirty = true;
++		}
++	}
++
++	if (nodeclk && nodeclk->clk && nodeclk->dirty) {
++		long rounded_rate;
++
++		if (nodeclk->rate) {
++			rounded_rate = clk_round_rate(nodeclk->clk,
++							nodeclk->rate);
++			ret = setrate_nodeclk(nodeclk, rounded_rate);
++
++			if (ret) {
++				MSM_BUS_ERR("%s: Failed to set_rate %lu for %d",
++					__func__, rounded_rate,
++						node->node_info->id);
++				ret = -ENODEV;
++				goto exit_flush_clk_data;
++			}
++
++			ret = enable_nodeclk(nodeclk);
++		} else
++			ret = disable_nodeclk(nodeclk);
++
++		if (ret) {
++			MSM_BUS_ERR("%s: Failed to enable for %d", __func__,
++						node->node_info->id);
++			ret = -ENODEV;
++			goto exit_flush_clk_data;
++		}
++		MSM_BUS_DBG("%s: Updated %d clk to %llu", __func__,
++				node->node_info->id, nodeclk->rate);
++
++	}
++exit_flush_clk_data:
++	/* Reset the aggregated clock rate for fab devices*/
++	if (node && node->node_info->is_fab_dev)
++		node->cur_clk_hz[ctx] = 0;
++
++	if (nodeclk)
++		nodeclk->dirty = 0;
++	return ret;
++}
++
++int msm_bus_commit_data(int *dirty_nodes, int ctx, int num_dirty)
++{
++	int ret = 0;
++	int i = 0;
++
++	/* Aggregate the bus clocks */
++	bus_for_each_dev(&msm_bus_type, NULL, (void *)&ctx,
++				msm_bus_agg_fab_clks);
++
++	for (i = 0; i < num_dirty; i++) {
++		struct device *node_device =
++					bus_find_device(&msm_bus_type, NULL,
++						(void *)&dirty_nodes[i],
++						msm_bus_device_match_adhoc);
++
++		if (!node_device) {
++			MSM_BUS_ERR("Can't find device for %d", dirty_nodes[i]);
++			continue;
++		}
++
++		ret = flush_bw_data(node_device, ctx);
++		if (ret)
++			MSM_BUS_ERR("%s: Error flushing bw data for node %d",
++					__func__, dirty_nodes[i]);
++
++		ret = flush_clk_data(node_device, ctx);
++		if (ret)
++			MSM_BUS_ERR("%s: Error flushing clk data for node %d",
++					__func__, dirty_nodes[i]);
++	}
++	kfree(dirty_nodes);
++	/* Aggregate the bus clocks */
++	bus_for_each_dev(&msm_bus_type, NULL, (void *)&ctx,
++				msm_bus_reset_fab_clks);
++	return ret;
++}
++
++void *msm_bus_realloc_devmem(struct device *dev, void *p, size_t old_size,
++					size_t new_size, gfp_t flags)
++{
++	void *ret;
++	size_t copy_size = old_size;
++
++	if (!new_size) {
++		devm_kfree(dev, p);
++		return ZERO_SIZE_PTR;
++	}
++
++	if (new_size < old_size)
++		copy_size = new_size;
++
++	ret = devm_kzalloc(dev, new_size, flags);
++	if (!ret) {
++		MSM_BUS_ERR("%s: Error Reallocating memory", __func__);
++		goto exit_realloc_devmem;
++	}
++
++	memcpy(ret, p, copy_size);
++	devm_kfree(dev, p);
++exit_realloc_devmem:
++	return ret;
++}
++
++
++static int add_dirty_node(int **dirty_nodes, int id, int *num_dirty)
++{
++	int i;
++	int found = 0;
++	int ret = 0;
++	int *dnode = NULL;
++
++	for (i = 0; i < *num_dirty; i++) {
++		if ((*dirty_nodes)[i] == id) {
++			found = 1;
++			break;
++		}
++	}
++
++	if (!found) {
++		(*num_dirty)++;
++		dnode =
++			krealloc(*dirty_nodes, sizeof(int) * (*num_dirty),
++								GFP_KERNEL);
++
++		if (ZERO_OR_NULL_PTR(dnode)) {
++			MSM_BUS_ERR("%s: Failure allocating dirty nodes array",
++								 __func__);
++			ret = -ENOMEM;
++		} else {
++			*dirty_nodes = dnode;
++			(*dirty_nodes)[(*num_dirty) - 1] = id;
++		}
++	}
++
++	return ret;
++}
++
++int msm_bus_update_bw(struct msm_bus_node_device_type *nodedev, int ctx,
++			int64_t add_bw, int **dirty_nodes, int *num_dirty)
++{
++	int ret = 0;
++	int i, j;
++	uint64_t cur_ab_slp = 0;
++	uint64_t cur_ab_act = 0;
++
++	if (nodedev->node_info->virt_dev)
++		goto exit_update_bw;
++
++	for (i = 0; i < NUM_CTX; i++) {
++		for (j = 0; j < nodedev->num_lnodes; j++) {
++			if (i == DUAL_CTX) {
++				cur_ab_act +=
++					nodedev->lnode_list[j].lnode_ab[i];
++				cur_ab_slp +=
++					nodedev->lnode_list[j].lnode_ab[i];
++			} else
++				cur_ab_act +=
++					nodedev->lnode_list[j].lnode_ab[i];
++		}
++	}
++
++	if (nodedev->node_ab.ab[MSM_RPM_CTX_ACTIVE_SET] != cur_ab_act) {
++		nodedev->node_ab.ab[MSM_RPM_CTX_ACTIVE_SET] = cur_ab_act;
++		nodedev->node_ab.ab[MSM_RPM_CTX_SLEEP_SET] = cur_ab_slp;
++		nodedev->node_ab.dirty = true;
++		ret = add_dirty_node(dirty_nodes, nodedev->node_info->id,
++								num_dirty);
++
++		if (ret) {
++			MSM_BUS_ERR("%s: Failed to add dirty node %d", __func__,
++						nodedev->node_info->id);
++			goto exit_update_bw;
++		}
++	}
++
++exit_update_bw:
++	return ret;
++}
++
++int msm_bus_update_clks(struct msm_bus_node_device_type *nodedev,
++		int ctx, int **dirty_nodes, int *num_dirty)
++{
++	int status = 0;
++	struct nodeclk *nodeclk;
++	struct nodeclk *busclk;
++	struct msm_bus_node_device_type *bus_info = NULL;
++	uint64_t req_clk;
++
++	bus_info = nodedev->node_info->bus_device->platform_data;
++
++	if (!bus_info) {
++		MSM_BUS_ERR("%s: Unable to find bus device for device %d",
++			__func__, nodedev->node_info->id);
++		status = -ENODEV;
++		goto exit_set_clks;
++	}
++
++	req_clk = nodedev->cur_clk_hz[ctx];
++	busclk = &bus_info->clk[ctx];
++
++	if (busclk->rate != req_clk) {
++		busclk->rate = req_clk;
++		busclk->dirty = 1;
++		MSM_BUS_DBG("%s: Modifying bus clk %d Rate %llu", __func__,
++					bus_info->node_info->id, req_clk);
++		status = add_dirty_node(dirty_nodes, bus_info->node_info->id,
++								num_dirty);
++
++		if (status) {
++			MSM_BUS_ERR("%s: Failed to add dirty node %d", __func__,
++						bus_info->node_info->id);
++			goto exit_set_clks;
++		}
++	}
++
++	req_clk = nodedev->cur_clk_hz[ctx];
++	nodeclk = &nodedev->clk[ctx];
++
++	if (IS_ERR_OR_NULL(nodeclk))
++		goto exit_set_clks;
++
++	if (!nodeclk->dirty || (nodeclk->dirty && (nodeclk->rate < req_clk))) {
++		nodeclk->rate = req_clk;
++		nodeclk->dirty = 1;
++		MSM_BUS_DBG("%s: Modifying node clk %d Rate %llu", __func__,
++					nodedev->node_info->id, req_clk);
++		status = add_dirty_node(dirty_nodes, nodedev->node_info->id,
++								num_dirty);
++		if (status) {
++			MSM_BUS_ERR("%s: Failed to add dirty node %d", __func__,
++						nodedev->node_info->id);
++			goto exit_set_clks;
++		}
++	}
++
++exit_set_clks:
++	return status;
++}
++
++static void msm_bus_fab_init_noc_ops(struct msm_bus_node_device_type *bus_dev)
++{
++	switch (bus_dev->fabdev->bus_type) {
++	case MSM_BUS_NOC:
++		msm_bus_noc_set_ops(bus_dev);
++		break;
++	case MSM_BUS_BIMC:
++		msm_bus_bimc_set_ops(bus_dev);
++		break;
++	default:
++		MSM_BUS_ERR("%s: Invalid Bus type", __func__);
++	}
++}
++
++static int msm_bus_qos_disable_clk(struct msm_bus_node_device_type *node,
++				int disable_bus_qos_clk)
++{
++	struct msm_bus_node_device_type *bus_node = NULL;
++	int ret = 0;
++
++	if (!node) {
++		ret = -ENXIO;
++		goto exit_disable_qos_clk;
++	}
++
++	bus_node = node->node_info->bus_device->platform_data;
++
++	if (!bus_node) {
++		ret = -ENXIO;
++		goto exit_disable_qos_clk;
++	}
++
++	if (disable_bus_qos_clk)
++		ret = disable_nodeclk(&bus_node->clk[DUAL_CTX]);
++
++	if (ret) {
++		MSM_BUS_ERR("%s: Failed to disable bus clk, node %d",
++			__func__, node->node_info->id);
++		goto exit_disable_qos_clk;
++	}
++
++	if (!IS_ERR_OR_NULL(node->qos_clk.clk)) {
++		ret = disable_nodeclk(&node->qos_clk);
++
++		if (ret) {
++			MSM_BUS_ERR("%s: Failed to disable mas qos clk,node %d",
++				__func__, node->node_info->id);
++			goto exit_disable_qos_clk;
++		}
++	}
++
++exit_disable_qos_clk:
++	return ret;
++}
++
++static int msm_bus_qos_enable_clk(struct msm_bus_node_device_type *node)
++{
++	struct msm_bus_node_device_type *bus_node = NULL;
++	long rounded_rate;
++	int ret = 0;
++	int bus_qos_enabled = 0;
++
++	if (!node) {
++		ret = -ENXIO;
++		goto exit_enable_qos_clk;
++	}
++
++	bus_node = node->node_info->bus_device->platform_data;
++
++	if (!bus_node) {
++		ret = -ENXIO;
++		goto exit_enable_qos_clk;
++	}
++
++	/* Check if the bus clk is already set before trying to set it
++	 * Do this only during
++	 *	a. Bootup
++	 *	b. Only for bus clks
++	 **/
++	if (!clk_get_rate(bus_node->clk[DUAL_CTX].clk)) {
++		rounded_rate = clk_round_rate(bus_node->clk[DUAL_CTX].clk, 1);
++		ret = setrate_nodeclk(&bus_node->clk[DUAL_CTX], rounded_rate);
++		if (ret) {
++			MSM_BUS_ERR("%s: Failed to set bus clk, node %d",
++				__func__, node->node_info->id);
++			goto exit_enable_qos_clk;
++		}
++
++		ret = enable_nodeclk(&bus_node->clk[DUAL_CTX]);
++		if (ret) {
++			MSM_BUS_ERR("%s: Failed to enable bus clk, node %d",
++				__func__, node->node_info->id);
++			goto exit_enable_qos_clk;
++		}
++		bus_qos_enabled = 1;
++	}
++
++	if (!IS_ERR_OR_NULL(node->qos_clk.clk)) {
++		rounded_rate = clk_round_rate(node->qos_clk.clk, 1);
++		ret = setrate_nodeclk(&node->qos_clk, rounded_rate);
++		if (ret) {
++			MSM_BUS_ERR("%s: Failed to enable mas qos clk, node %d",
++				__func__, node->node_info->id);
++			goto exit_enable_qos_clk;
++		}
++
++		ret = enable_nodeclk(&node->qos_clk);
++		if (ret) {
++			MSM_BUS_ERR("Err enable mas qos clk, node %d ret %d",
++				node->node_info->id, ret);
++			goto exit_enable_qos_clk;
++		}
++	}
++	ret = bus_qos_enabled;
++
++exit_enable_qos_clk:
++	return ret;
++}
++
++int msm_bus_enable_limiter(struct msm_bus_node_device_type *node_dev,
++				bool enable, uint64_t lim_bw)
++{
++	int ret = 0;
++	struct msm_bus_node_device_type *bus_node_dev;
++
++	if (!node_dev) {
++		MSM_BUS_ERR("No device specified");
++		ret = -ENXIO;
++		goto exit_enable_limiter;
++	}
++
++	if (!node_dev->ap_owned) {
++		MSM_BUS_ERR("Device is not AP owned %d.",
++						node_dev->node_info->id);
++		ret = -ENXIO;
++		goto exit_enable_limiter;
++	}
++
++	bus_node_dev = node_dev->node_info->bus_device->platform_data;
++	if (!bus_node_dev) {
++		MSM_BUS_ERR("Unable to get bus device infofor %d",
++			node_dev->node_info->id);
++		ret = -ENXIO;
++		goto exit_enable_limiter;
++	}
++	if (bus_node_dev->fabdev &&
++		bus_node_dev->fabdev->noc_ops.limit_mport) {
++		ret = msm_bus_qos_enable_clk(node_dev);
++		if (ret < 0) {
++			MSM_BUS_ERR("Can't Enable QoS clk %d",
++				node_dev->node_info->id);
++			goto exit_enable_limiter;
++		}
++		bus_node_dev->fabdev->noc_ops.limit_mport(
++				node_dev,
++				bus_node_dev->fabdev->qos_base,
++				bus_node_dev->fabdev->base_offset,
++				bus_node_dev->fabdev->qos_off,
++				bus_node_dev->fabdev->qos_freq,
++				enable, lim_bw);
++		msm_bus_qos_disable_clk(node_dev, ret);
++	}
++
++exit_enable_limiter:
++	return ret;
++}
++
++static int msm_bus_dev_init_qos(struct device *dev, void *data)
++{
++	int ret = 0;
++	struct msm_bus_node_device_type *node_dev = NULL;
++
++	node_dev = dev->platform_data;
++
++	if (!node_dev) {
++		MSM_BUS_ERR("%s: Unable to get node device info" , __func__);
++		ret = -ENXIO;
++		goto exit_init_qos;
++	}
++
++	MSM_BUS_DBG("Device = %d", node_dev->node_info->id);
++
++	if (node_dev->ap_owned) {
++		struct msm_bus_node_device_type *bus_node_info;
++
++		bus_node_info = node_dev->node_info->bus_device->platform_data;
++
++		if (!bus_node_info) {
++			MSM_BUS_ERR("%s: Unable to get bus device infofor %d",
++				__func__,
++				node_dev->node_info->id);
++			ret = -ENXIO;
++			goto exit_init_qos;
++		}
++
++		if (bus_node_info->fabdev &&
++			bus_node_info->fabdev->noc_ops.qos_init) {
++			int ret = 0;
++
++			if (node_dev->ap_owned &&
++				(node_dev->node_info->qos_params.mode) != -1) {
++
++				if (bus_node_info->fabdev->bypass_qos_prg)
++					goto exit_init_qos;
++
++				ret = msm_bus_qos_enable_clk(node_dev);
++				if (ret < 0) {
++					MSM_BUS_ERR("Can't Enable QoS clk %d",
++					node_dev->node_info->id);
++					goto exit_init_qos;
++				}
++
++				bus_node_info->fabdev->noc_ops.qos_init(
++					node_dev,
++					bus_node_info->fabdev->qos_base,
++					bus_node_info->fabdev->base_offset,
++					bus_node_info->fabdev->qos_off,
++					bus_node_info->fabdev->qos_freq);
++				msm_bus_qos_disable_clk(node_dev, ret);
++			}
++		} else
++			MSM_BUS_ERR("%s: Skipping QOS init for %d",
++				__func__, node_dev->node_info->id);
++	}
++exit_init_qos:
++	return ret;
++}
++
++static int msm_bus_fabric_init(struct device *dev,
++			struct msm_bus_node_device_type *pdata)
++{
++	struct msm_bus_fab_device_type *fabdev;
++	struct msm_bus_node_device_type *node_dev = NULL;
++	int ret = 0;
++
++	node_dev = dev->platform_data;
++	if (!node_dev) {
++		MSM_BUS_ERR("%s: Unable to get bus device info" , __func__);
++		ret = -ENXIO;
++		goto exit_fabric_init;
++	}
++
++	if (node_dev->node_info->virt_dev) {
++		MSM_BUS_ERR("%s: Skip Fab init for virtual device %d", __func__,
++						node_dev->node_info->id);
++		goto exit_fabric_init;
++	}
++
++	fabdev = devm_kzalloc(dev, sizeof(struct msm_bus_fab_device_type),
++								GFP_KERNEL);
++	if (!fabdev) {
++		MSM_BUS_ERR("Fabric alloc failed\n");
++		ret = -ENOMEM;
++		goto exit_fabric_init;
++	}
++
++	node_dev->fabdev = fabdev;
++	fabdev->pqos_base = pdata->fabdev->pqos_base;
++	fabdev->qos_range = pdata->fabdev->qos_range;
++	fabdev->base_offset = pdata->fabdev->base_offset;
++	fabdev->qos_off = pdata->fabdev->qos_off;
++	fabdev->qos_freq = pdata->fabdev->qos_freq;
++	fabdev->bus_type = pdata->fabdev->bus_type;
++	fabdev->bypass_qos_prg = pdata->fabdev->bypass_qos_prg;
++	fabdev->util_fact = pdata->fabdev->util_fact;
++	fabdev->vrail_comp = pdata->fabdev->vrail_comp;
++	msm_bus_fab_init_noc_ops(node_dev);
++
++	fabdev->qos_base = devm_ioremap(dev,
++				fabdev->pqos_base, fabdev->qos_range);
++	if (!fabdev->qos_base) {
++		MSM_BUS_ERR("%s: Error remapping address 0x%zx :bus device %d",
++			__func__,
++			 (size_t)fabdev->pqos_base, node_dev->node_info->id);
++		ret = -ENOMEM;
++		goto exit_fabric_init;
++	}
++
++	/*if (msmbus_coresight_init(pdev))
++		pr_warn("Coresight support absent for bus: %d\n", pdata->id);*/
++exit_fabric_init:
++	return ret;
++}
++
++static int msm_bus_init_clk(struct device *bus_dev,
++				struct msm_bus_node_device_type *pdata)
++{
++	unsigned int ctx;
++	int ret = 0;
++	struct msm_bus_node_device_type *node_dev = bus_dev->platform_data;
++
++	for (ctx = 0; ctx < NUM_CTX; ctx++) {
++		if (!IS_ERR_OR_NULL(pdata->clk[ctx].clk)) {
++			node_dev->clk[ctx].clk = pdata->clk[ctx].clk;
++			node_dev->clk[ctx].enable = false;
++			node_dev->clk[ctx].dirty = false;
++			MSM_BUS_ERR("%s: Valid node clk node %d ctx %d",
++				__func__, node_dev->node_info->id, ctx);
++		}
++	}
++
++	if (!IS_ERR_OR_NULL(pdata->qos_clk.clk)) {
++		node_dev->qos_clk.clk = pdata->qos_clk.clk;
++		node_dev->qos_clk.enable = false;
++		MSM_BUS_ERR("%s: Valid Iface clk node %d", __func__,
++						node_dev->node_info->id);
++	}
++
++	return ret;
++}
++
++static int msm_bus_copy_node_info(struct msm_bus_node_device_type *pdata,
++				struct device *bus_dev)
++{
++	int ret = 0;
++	struct msm_bus_node_info_type *node_info = NULL;
++	struct msm_bus_node_info_type *pdata_node_info = NULL;
++	struct msm_bus_node_device_type *bus_node = NULL;
++
++	bus_node = bus_dev->platform_data;
++
++	if (!bus_node || !pdata) {
++		ret = -ENXIO;
++		MSM_BUS_ERR("%s: Invalid pointers pdata %p, bus_node %p",
++			__func__, pdata, bus_node);
++		goto exit_copy_node_info;
++	}
++
++	node_info = bus_node->node_info;
++	pdata_node_info = pdata->node_info;
++
++	node_info->name = pdata_node_info->name;
++	node_info->id =  pdata_node_info->id;
++	node_info->bus_device_id = pdata_node_info->bus_device_id;
++	node_info->mas_rpm_id = pdata_node_info->mas_rpm_id;
++	node_info->slv_rpm_id = pdata_node_info->slv_rpm_id;
++	node_info->num_connections = pdata_node_info->num_connections;
++	node_info->num_blist = pdata_node_info->num_blist;
++	node_info->num_qports = pdata_node_info->num_qports;
++	node_info->buswidth = pdata_node_info->buswidth;
++	node_info->virt_dev = pdata_node_info->virt_dev;
++	node_info->is_fab_dev = pdata_node_info->is_fab_dev;
++	node_info->qos_params.mode = pdata_node_info->qos_params.mode;
++	node_info->qos_params.prio1 = pdata_node_info->qos_params.prio1;
++	node_info->qos_params.prio0 = pdata_node_info->qos_params.prio0;
++	node_info->qos_params.prio_lvl = pdata_node_info->qos_params.prio_lvl;
++	node_info->qos_params.prio_rd = pdata_node_info->qos_params.prio_rd;
++	node_info->qos_params.prio_wr = pdata_node_info->qos_params.prio_wr;
++	node_info->qos_params.gp = pdata_node_info->qos_params.gp;
++	node_info->qos_params.thmp = pdata_node_info->qos_params.thmp;
++	node_info->qos_params.ws = pdata_node_info->qos_params.ws;
++	node_info->qos_params.bw_buffer = pdata_node_info->qos_params.bw_buffer;
++	node_info->util_fact = pdata_node_info->util_fact;
++	node_info->vrail_comp = pdata_node_info->vrail_comp;
++
++	node_info->dev_connections = devm_kzalloc(bus_dev,
++			sizeof(struct device *) *
++				pdata_node_info->num_connections,
++			GFP_KERNEL);
++	if (!node_info->dev_connections) {
++		MSM_BUS_ERR("%s:Bus dev connections alloc failed\n", __func__);
++		ret = -ENOMEM;
++		goto exit_copy_node_info;
++	}
++
++	node_info->connections = devm_kzalloc(bus_dev,
++			sizeof(int) * pdata_node_info->num_connections,
++			GFP_KERNEL);
++	if (!node_info->connections) {
++		MSM_BUS_ERR("%s:Bus connections alloc failed\n", __func__);
++		devm_kfree(bus_dev, node_info->dev_connections);
++		ret = -ENOMEM;
++		goto exit_copy_node_info;
++	}
++
++	memcpy(node_info->connections,
++		pdata_node_info->connections,
++		sizeof(int) * pdata_node_info->num_connections);
++
++	node_info->black_connections = devm_kzalloc(bus_dev,
++			sizeof(struct device *) *
++				pdata_node_info->num_blist,
++			GFP_KERNEL);
++	if (!node_info->black_connections) {
++		MSM_BUS_ERR("%s: Bus black connections alloc failed\n",
++			__func__);
++		devm_kfree(bus_dev, node_info->dev_connections);
++		devm_kfree(bus_dev, node_info->connections);
++		ret = -ENOMEM;
++		goto exit_copy_node_info;
++	}
++
++	node_info->black_listed_connections = devm_kzalloc(bus_dev,
++			pdata_node_info->num_blist * sizeof(int),
++			GFP_KERNEL);
++	if (!node_info->black_listed_connections) {
++		MSM_BUS_ERR("%s:Bus black list connections alloc failed\n",
++					__func__);
++		devm_kfree(bus_dev, node_info->black_connections);
++		devm_kfree(bus_dev, node_info->dev_connections);
++		devm_kfree(bus_dev, node_info->connections);
++		ret = -ENOMEM;
++		goto exit_copy_node_info;
++	}
++
++	memcpy(node_info->black_listed_connections,
++		pdata_node_info->black_listed_connections,
++		sizeof(int) * pdata_node_info->num_blist);
++
++	node_info->qport = devm_kzalloc(bus_dev,
++			sizeof(int) * pdata_node_info->num_qports,
++			GFP_KERNEL);
++	if (!node_info->qport) {
++		MSM_BUS_ERR("%s:Bus qport allocation failed\n", __func__);
++		devm_kfree(bus_dev, node_info->dev_connections);
++		devm_kfree(bus_dev, node_info->connections);
++		devm_kfree(bus_dev, node_info->black_listed_connections);
++		ret = -ENOMEM;
++		goto exit_copy_node_info;
++	}
++
++	memcpy(node_info->qport,
++		pdata_node_info->qport,
++		sizeof(int) * pdata_node_info->num_qports);
++
++exit_copy_node_info:
++	return ret;
++}
++
++static struct device *msm_bus_device_init(
++			struct msm_bus_node_device_type *pdata)
++{
++	struct device *bus_dev = NULL;
++	struct msm_bus_node_device_type *bus_node = NULL;
++	struct msm_bus_node_info_type *node_info = NULL;
++	int ret = 0;
++
++	bus_dev = kzalloc(sizeof(struct device), GFP_KERNEL);
++	if (!bus_dev) {
++		MSM_BUS_ERR("%s:Device alloc failed\n", __func__);
++		bus_dev = NULL;
++		goto exit_device_init;
++	}
++	/**
++	* Init here so we can use devm calls
++	*/
++	device_initialize(bus_dev);
++
++	bus_node = devm_kzalloc(bus_dev,
++			sizeof(struct msm_bus_node_device_type), GFP_KERNEL);
++	if (!bus_node) {
++		MSM_BUS_ERR("%s:Bus node alloc failed\n", __func__);
++		kfree(bus_dev);
++		bus_dev = NULL;
++		goto exit_device_init;
++	}
++
++	node_info = devm_kzalloc(bus_dev,
++			sizeof(struct msm_bus_node_info_type), GFP_KERNEL);
++	if (!node_info) {
++		MSM_BUS_ERR("%s:Bus node info alloc failed\n", __func__);
++		devm_kfree(bus_dev, bus_node);
++		kfree(bus_dev);
++		bus_dev = NULL;
++		goto exit_device_init;
++	}
++
++	bus_node->node_info = node_info;
++	bus_node->ap_owned = pdata->ap_owned;
++	bus_dev->platform_data = bus_node;
++
++	if (msm_bus_copy_node_info(pdata, bus_dev) < 0) {
++		devm_kfree(bus_dev, bus_node);
++		devm_kfree(bus_dev, node_info);
++		kfree(bus_dev);
++		bus_dev = NULL;
++		goto exit_device_init;
++	}
++
++	bus_dev->bus = &msm_bus_type;
++	dev_set_name(bus_dev, bus_node->node_info->name);
++
++	ret = device_add(bus_dev);
++	if (ret < 0) {
++		MSM_BUS_ERR("%s: Error registering device %d",
++				__func__, pdata->node_info->id);
++		devm_kfree(bus_dev, bus_node);
++		devm_kfree(bus_dev, node_info->dev_connections);
++		devm_kfree(bus_dev, node_info->connections);
++		devm_kfree(bus_dev, node_info->black_connections);
++		devm_kfree(bus_dev, node_info->black_listed_connections);
++		devm_kfree(bus_dev, node_info);
++		kfree(bus_dev);
++		bus_dev = NULL;
++		goto exit_device_init;
++	}
++	device_create_file(bus_dev, &dev_attr_vrail);
++
++exit_device_init:
++	return bus_dev;
++}
++
++static int msm_bus_setup_dev_conn(struct device *bus_dev, void *data)
++{
++	struct msm_bus_node_device_type *bus_node = NULL;
++	int ret = 0;
++	int j;
++
++	bus_node = bus_dev->platform_data;
++	if (!bus_node) {
++		MSM_BUS_ERR("%s: Can't get device info", __func__);
++		ret = -ENODEV;
++		goto exit_setup_dev_conn;
++	}
++
++	/* Setup parent bus device for this node */
++	if (!bus_node->node_info->is_fab_dev) {
++		struct device *bus_parent_device =
++			bus_find_device(&msm_bus_type, NULL,
++				(void *)&bus_node->node_info->bus_device_id,
++				msm_bus_device_match_adhoc);
++
++		if (!bus_parent_device) {
++			MSM_BUS_ERR("%s: Error finding parentdev %d parent %d",
++				__func__,
++				bus_node->node_info->id,
++				bus_node->node_info->bus_device_id);
++			ret = -ENXIO;
++			goto exit_setup_dev_conn;
++		}
++		bus_node->node_info->bus_device = bus_parent_device;
++	}
++
++	bus_node->node_info->is_traversed = false;
++
++	for (j = 0; j < bus_node->node_info->num_connections; j++) {
++		bus_node->node_info->dev_connections[j] =
++			bus_find_device(&msm_bus_type, NULL,
++				(void *)&bus_node->node_info->connections[j],
++				msm_bus_device_match_adhoc);
++
++		if (!bus_node->node_info->dev_connections[j]) {
++			MSM_BUS_ERR("%s: Error finding conn %d for device %d",
++				__func__, bus_node->node_info->connections[j],
++				 bus_node->node_info->id);
++			ret = -ENODEV;
++			goto exit_setup_dev_conn;
++		}
++	}
++
++	for (j = 0; j < bus_node->node_info->num_blist; j++) {
++		bus_node->node_info->black_connections[j] =
++			bus_find_device(&msm_bus_type, NULL,
++				(void *)&bus_node->node_info->
++				black_listed_connections[j],
++				msm_bus_device_match_adhoc);
++
++		if (!bus_node->node_info->black_connections[j]) {
++			MSM_BUS_ERR("%s: Error finding conn %d for device %d\n",
++				__func__, bus_node->node_info->
++				black_listed_connections[j],
++				bus_node->node_info->id);
++			ret = -ENODEV;
++			goto exit_setup_dev_conn;
++		}
++	}
++
++exit_setup_dev_conn:
++	return ret;
++}
++
++static int msm_bus_node_debug(struct device *bus_dev, void *data)
++{
++	int j;
++	int ret = 0;
++	struct msm_bus_node_device_type *bus_node = NULL;
++
++	bus_node = bus_dev->platform_data;
++	if (!bus_node) {
++		MSM_BUS_ERR("%s: Can't get device info", __func__);
++		ret = -ENODEV;
++		goto exit_node_debug;
++	}
++
++	MSM_BUS_DBG("Device = %d buswidth %u", bus_node->node_info->id,
++				bus_node->node_info->buswidth);
++	for (j = 0; j < bus_node->node_info->num_connections; j++) {
++		struct msm_bus_node_device_type *bdev =
++			(struct msm_bus_node_device_type *)
++			bus_node->node_info->dev_connections[j]->platform_data;
++		MSM_BUS_DBG("\n\t Connection[%d] %d", j, bdev->node_info->id);
++	}
++
++exit_node_debug:
++	return ret;
++}
++
++static int msm_bus_device_probe(struct platform_device *pdev)
++{
++	unsigned int i, ret;
++	struct msm_bus_device_node_registration *pdata;
++
++	/* If possible, get pdata from device-tree */
++	if (pdev->dev.of_node)
++		pdata = msm_bus_of_to_pdata(pdev);
++	else {
++		pdata = (struct msm_bus_device_node_registration *)pdev->
++			dev.platform_data;
++	}
++
++	if (IS_ERR_OR_NULL(pdata)) {
++		MSM_BUS_ERR("No platform data found");
++		ret = -ENODATA;
++		goto exit_device_probe;
++	}
++
++	for (i = 0; i < pdata->num_devices; i++) {
++		struct device *node_dev = NULL;
++
++		node_dev = msm_bus_device_init(&pdata->info[i]);
++
++		if (!node_dev) {
++			MSM_BUS_ERR("%s: Error during dev init for %d",
++				__func__, pdata->info[i].node_info->id);
++			ret = -ENXIO;
++			goto exit_device_probe;
++		}
++
++		ret = msm_bus_init_clk(node_dev, &pdata->info[i]);
++		/*Is this a fabric device ?*/
++		if (pdata->info[i].node_info->is_fab_dev) {
++			MSM_BUS_DBG("%s: %d is a fab", __func__,
++						pdata->info[i].node_info->id);
++			ret = msm_bus_fabric_init(node_dev, &pdata->info[i]);
++			if (ret) {
++				MSM_BUS_ERR("%s: Error intializing fab %d",
++					__func__, pdata->info[i].node_info->id);
++				goto exit_device_probe;
++			}
++		}
++	}
++
++	ret = bus_for_each_dev(&msm_bus_type, NULL, NULL,
++						msm_bus_setup_dev_conn);
++	if (ret) {
++		MSM_BUS_ERR("%s: Error setting up dev connections", __func__);
++		goto exit_device_probe;
++	}
++
++	ret = bus_for_each_dev(&msm_bus_type, NULL, NULL, msm_bus_dev_init_qos);
++	if (ret) {
++		MSM_BUS_ERR("%s: Error during qos init", __func__);
++		goto exit_device_probe;
++	}
++
++	bus_for_each_dev(&msm_bus_type, NULL, NULL, msm_bus_node_debug);
++
++	/* Register the arb layer ops */
++	msm_bus_arb_setops_adhoc(&arb_ops);
++	devm_kfree(&pdev->dev, pdata->info);
++	devm_kfree(&pdev->dev, pdata);
++exit_device_probe:
++	return ret;
++}
++
++static int msm_bus_device_rules_probe(struct platform_device *pdev)
++{
++	struct bus_rule_type *rule_data = NULL;
++	int num_rules = 0;
++
++	num_rules = msm_bus_of_get_static_rules(pdev, &rule_data);
++
++	if (!rule_data)
++		goto exit_rules_probe;
++
++	msm_rule_register(num_rules, rule_data, NULL);
++	static_rules.num_rules = num_rules;
++	static_rules.rules = rule_data;
++	pdev->dev.platform_data = &static_rules;
++
++exit_rules_probe:
++	return 0;
++}
++
++int msm_bus_device_rules_remove(struct platform_device *pdev)
++{
++	struct static_rules_type *static_rules = NULL;
++
++	static_rules = pdev->dev.platform_data;
++	if (static_rules)
++		msm_rule_unregister(static_rules->num_rules,
++					static_rules->rules, NULL);
++	return 0;
++}
++
++static int msm_bus_free_dev(struct device *dev, void *data)
++{
++	struct msm_bus_node_device_type *bus_node = NULL;
++
++	bus_node = dev->platform_data;
++
++	if (bus_node)
++		MSM_BUS_ERR("\n%s: Removing device %d", __func__,
++						bus_node->node_info->id);
++	device_unregister(dev);
++	return 0;
++}
++
++int msm_bus_device_remove(struct platform_device *pdev)
++{
++	bus_for_each_dev(&msm_bus_type, NULL, NULL, msm_bus_free_dev);
++	return 0;
++}
++
++static struct of_device_id rules_match[] = {
++	{.compatible = "qcom,msm-bus-static-bw-rules"},
++	{}
++};
++
++static struct platform_driver msm_bus_rules_driver = {
++	.probe = msm_bus_device_rules_probe,
++	.remove = msm_bus_device_rules_remove,
++	.driver = {
++		.name = "msm_bus_rules_device",
++		.owner = THIS_MODULE,
++		.of_match_table = rules_match,
++	},
++};
++
++static struct of_device_id fabric_match[] = {
++	{.compatible = "qcom,msm-bus-device"},
++	{}
++};
++
++static struct platform_driver msm_bus_device_driver = {
++	.probe = msm_bus_device_probe,
++	.remove = msm_bus_device_remove,
++	.driver = {
++		.name = "msm_bus_device",
++		.owner = THIS_MODULE,
++		.of_match_table = fabric_match,
++	},
++};
++
++int __init msm_bus_device_init_driver(void)
++{
++	int rc;
++
++	MSM_BUS_ERR("msm_bus_fabric_init_driver\n");
++	rc =  platform_driver_register(&msm_bus_device_driver);
++
++	if (rc) {
++		MSM_BUS_ERR("Failed to register bus device driver");
++		return rc;
++	}
++	return platform_driver_register(&msm_bus_rules_driver);
++}
++subsys_initcall(msm_bus_device_init_driver);
+--- /dev/null
++++ b/drivers/bus/msm_bus/msm_bus_id.c
+@@ -0,0 +1,94 @@
++/* Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/module.h>
++#include "msm-bus.h"
++#include "msm-bus-board.h"
++#include "msm_bus_core.h"
++#include "msm_bus_noc.h"
++#include "msm_bus_bimc.h"
++
++static uint32_t master_iids[MSM_BUS_MASTER_LAST];
++static uint32_t slave_iids[MSM_BUS_SLAVE_LAST - SLAVE_ID_KEY];
++
++static void msm_bus_assign_iids(struct msm_bus_fabric_registration
++	*fabreg, int fabid)
++{
++	int i;
++	for (i = 0; i < fabreg->len; i++) {
++		if (!fabreg->info[i].gateway) {
++			fabreg->info[i].priv_id = fabid + fabreg->info[i].id;
++			if (fabreg->info[i].id < SLAVE_ID_KEY) {
++				if (fabreg->info[i].id >= MSM_BUS_MASTER_LAST) {
++					WARN(1, "id %d exceeds array size!\n",
++						fabreg->info[i].id);
++					continue;
++				}
++
++				master_iids[fabreg->info[i].id] =
++					fabreg->info[i].priv_id;
++			} else {
++				if ((fabreg->info[i].id - SLAVE_ID_KEY) >=
++					(MSM_BUS_SLAVE_LAST - SLAVE_ID_KEY)) {
++					WARN(1, "id %d exceeds array size!\n",
++						fabreg->info[i].id);
++					continue;
++				}
++
++				slave_iids[fabreg->info[i].id - (SLAVE_ID_KEY)]
++					= fabreg->info[i].priv_id;
++			}
++		} else {
++			fabreg->info[i].priv_id = fabreg->info[i].id;
++		}
++	}
++}
++
++static int msm_bus_get_iid(int id)
++{
++	if ((id < SLAVE_ID_KEY && id >= MSM_BUS_MASTER_LAST) ||
++		id >= MSM_BUS_SLAVE_LAST) {
++		MSM_BUS_ERR("Cannot get iid. Invalid id %d passed\n", id);
++		return -EINVAL;
++	}
++
++	return CHECK_ID(((id < SLAVE_ID_KEY) ? master_iids[id] :
++		slave_iids[id - SLAVE_ID_KEY]), id);
++}
++
++static struct msm_bus_board_algorithm msm_bus_id_algo = {
++	.get_iid = msm_bus_get_iid,
++	.assign_iids = msm_bus_assign_iids,
++};
++
++int msm_bus_board_rpm_get_il_ids(uint16_t *id)
++{
++	return -ENXIO;
++}
++
++void msm_bus_board_init(struct msm_bus_fabric_registration *pdata)
++{
++	pdata->board_algo = &msm_bus_id_algo;
++}
++
++void msm_bus_board_set_nfab(struct msm_bus_fabric_registration *pdata,
++	int nfab)
++{
++	if (nfab <= 0)
++		return;
++
++	msm_bus_id_algo.board_nfab = nfab;
++}
+--- /dev/null
++++ b/drivers/bus/msm_bus/msm_bus_noc.c
+@@ -0,0 +1,770 @@
++/* Copyright (c) 2012-2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++
++#define pr_fmt(fmt) "AXI: NOC: %s(): " fmt, __func__
++
++#include <linux/slab.h>
++#include <linux/io.h>
++#include "msm-bus-board.h"
++#include "msm_bus_core.h"
++#include "msm_bus_noc.h"
++#include "msm_bus_adhoc.h"
++
++/* NOC_QOS generic */
++#define __CLZ(x) ((8 * sizeof(uint32_t)) - 1 - __fls(x))
++#define SAT_SCALE 16	/* 16 bytes minimum for saturation */
++#define BW_SCALE  256	/* 1/256 byte per cycle unit */
++#define QOS_DEFAULT_BASEOFFSET		0x00003000
++#define QOS_DEFAULT_DELTA		0x80
++#define MAX_BW_FIELD (NOC_QOS_BWn_BW_BMSK >> NOC_QOS_BWn_BW_SHFT)
++#define MAX_SAT_FIELD (NOC_QOS_SATn_SAT_BMSK >> NOC_QOS_SATn_SAT_SHFT)
++
++#define NOC_QOS_REG_BASE(b, o)		((b) + (o))
++
++#define NOC_QOS_ID_COREIDn_ADDR(b, o, n, d) \
++	(NOC_QOS_REG_BASE(b, o) + (d) * (n))
++enum noc_qos_id_coreidn {
++	NOC_QOS_ID_COREIDn_RMSK			= 0xffffffff,
++	NOC_QOS_ID_COREIDn_MAXn			= 32,
++	NOC_QOS_ID_COREIDn_CORECHSUM_BMSK	= 0xffffff00,
++	NOC_QOS_ID_COREIDn_CORECHSUM_SHFT	= 0x8,
++	NOC_QOS_ID_COREIDn_CORETYPEID_BMSK	= 0xff,
++	NOC_QOS_ID_COREIDn_CORETYPEID_SHFT	= 0x0,
++};
++
++#define NOC_QOS_ID_REVISIONIDn_ADDR(b, o, n, d) \
++	(NOC_QOS_REG_BASE(b, o) + 0x4 + (d) * (n))
++enum noc_qos_id_revisionidn {
++	NOC_QOS_ID_REVISIONIDn_RMSK		= 0xffffffff,
++	NOC_QOS_ID_REVISIONIDn_MAXn		= 32,
++	NOC_QOS_ID_REVISIONIDn_FLEXNOCID_BMSK	= 0xffffff00,
++	NOC_QOS_ID_REVISIONIDn_FLEXNOCID_SHFT	= 0x8,
++	NOC_QOS_ID_REVISIONIDn_USERID_BMSK	= 0xff,
++	NOC_QOS_ID_REVISIONIDn_USERID_SHFT	= 0x0,
++};
++
++#define NOC_QOS_PRIORITYn_ADDR(b, o, n, d)	\
++	(NOC_QOS_REG_BASE(b, o) + 0x8 + (d) * (n))
++enum noc_qos_id_priorityn {
++	NOC_QOS_PRIORITYn_RMSK		= 0x0000000f,
++	NOC_QOS_PRIORITYn_MAXn		= 32,
++	NOC_QOS_PRIORITYn_P1_BMSK	= 0xc,
++	NOC_QOS_PRIORITYn_P1_SHFT	= 0x2,
++	NOC_QOS_PRIORITYn_P0_BMSK	= 0x3,
++	NOC_QOS_PRIORITYn_P0_SHFT	= 0x0,
++};
++
++#define NOC_QOS_MODEn_ADDR(b, o, n, d) \
++	(NOC_QOS_REG_BASE(b, o) + 0xC + (d) * (n))
++enum noc_qos_id_moden_rmsk {
++	NOC_QOS_MODEn_RMSK		= 0x00000003,
++	NOC_QOS_MODEn_MAXn		= 32,
++	NOC_QOS_MODEn_MODE_BMSK		= 0x3,
++	NOC_QOS_MODEn_MODE_SHFT		= 0x0,
++};
++
++#define NOC_QOS_BWn_ADDR(b, o, n, d) \
++	(NOC_QOS_REG_BASE(b, o) + 0x10 + (d) * (n))
++enum noc_qos_id_bwn {
++	NOC_QOS_BWn_RMSK		= 0x0000ffff,
++	NOC_QOS_BWn_MAXn		= 32,
++	NOC_QOS_BWn_BW_BMSK		= 0xffff,
++	NOC_QOS_BWn_BW_SHFT		= 0x0,
++};
++
++/* QOS Saturation registers */
++#define NOC_QOS_SATn_ADDR(b, o, n, d) \
++	(NOC_QOS_REG_BASE(b, o) + 0x14 + (d) * (n))
++enum noc_qos_id_saturationn {
++	NOC_QOS_SATn_RMSK		= 0x000003ff,
++	NOC_QOS_SATn_MAXn		= 32,
++	NOC_QOS_SATn_SAT_BMSK		= 0x3ff,
++	NOC_QOS_SATn_SAT_SHFT		= 0x0,
++};
++
++static int noc_div(uint64_t *a, uint32_t b)
++{
++	if ((*a > 0) && (*a < b))
++		return 1;
++	else
++		return do_div(*a, b);
++}
++
++/**
++ * Calculates bw hardware is using from register values
++ * bw returned is in bytes/sec
++ */
++static uint64_t noc_bw(uint32_t bw_field, uint32_t qos_freq)
++{
++	uint64_t res;
++	uint32_t rem, scale;
++
++	res = 2 * qos_freq * bw_field;
++	scale = BW_SCALE * 1000;
++	rem = noc_div(&res, scale);
++	MSM_BUS_DBG("NOC: Calculated bw: %llu\n", res * 1000000ULL);
++	return res * 1000000ULL;
++}
++
++static uint32_t noc_bw_ceil(long int bw_field, uint32_t qos_freq)
++{
++	uint64_t bw_temp = 2 * qos_freq * bw_field;
++	uint32_t scale = 1000 * BW_SCALE;
++	noc_div(&bw_temp, scale);
++	return bw_temp * 1000000;
++}
++#define MAX_BW(timebase) noc_bw_ceil(MAX_BW_FIELD, (timebase))
++
++/**
++ * Calculates ws hardware is using from register values
++ * ws returned is in nanoseconds
++ */
++static uint32_t noc_ws(uint64_t bw, uint32_t sat, uint32_t qos_freq)
++{
++	if (bw && qos_freq) {
++		uint32_t bwf = bw * qos_freq;
++		uint64_t scale = 1000000000000LL * BW_SCALE *
++			SAT_SCALE * sat;
++		noc_div(&scale, bwf);
++		MSM_BUS_DBG("NOC: Calculated ws: %llu\n", scale);
++		return scale;
++	}
++
++	return 0;
++}
++#define MAX_WS(bw, timebase) noc_ws((bw), MAX_SAT_FIELD, (timebase))
++
++/* Calculate bandwidth field value for requested bandwidth  */
++static uint32_t noc_bw_field(uint64_t bw, uint32_t qos_freq)
++{
++	uint32_t bw_field = 0;
++
++	if (bw) {
++		uint32_t rem;
++		uint64_t bw_capped = min_t(uint64_t, bw, MAX_BW(qos_freq));
++		uint64_t bwc = bw_capped * BW_SCALE;
++		uint64_t qf = 2 * qos_freq * 1000;
++
++		rem = noc_div(&bwc, qf);
++		bw_field = (uint32_t)min_t(uint64_t, bwc, MAX_BW_FIELD);
++	}
++
++	MSM_BUS_DBG("NOC: bw_field: %u\n", bw_field);
++	return bw_field;
++}
++
++static uint32_t noc_sat_field(uint64_t bw, uint32_t ws, uint32_t qos_freq)
++{
++	uint32_t sat_field = 0, win;
++
++	if (bw) {
++		/* Limit to max bw and scale bw to 100 KB increments */
++		uint64_t tbw, tscale;
++		uint64_t bw_scaled = min_t(uint64_t, bw, MAX_BW(qos_freq));
++		uint32_t rem = noc_div(&bw_scaled, 100000);
++
++		/**
++		 * Calculate saturation from windows size.
++		 * WS must be at least one arb period.
++		 * Saturation must not exceed max field size
++		 *
++		 * Bandwidth is in 100KB increments
++		 * Window size is in ns
++		 * qos_freq is in KHz
++		 */
++		win = max(ws, 1000000 / qos_freq);
++		tbw = bw_scaled * win * qos_freq;
++		tscale = 10000000ULL * BW_SCALE * SAT_SCALE;
++		rem = noc_div(&tbw, tscale);
++		sat_field = (uint32_t)min_t(uint64_t, tbw, MAX_SAT_FIELD);
++	}
++
++	MSM_BUS_DBG("NOC: sat_field: %d\n", sat_field);
++	return sat_field;
++}
++
++static void noc_set_qos_mode(void __iomem *base, uint32_t qos_off,
++		uint32_t mport, uint32_t qos_delta, uint8_t mode,
++		uint8_t perm_mode)
++{
++	if (mode < NOC_QOS_MODE_MAX &&
++		((1 << mode) & perm_mode)) {
++		uint32_t reg_val;
++
++		reg_val = readl_relaxed(NOC_QOS_MODEn_ADDR(base, qos_off,
++			mport, qos_delta)) & NOC_QOS_MODEn_RMSK;
++		writel_relaxed(((reg_val & (~(NOC_QOS_MODEn_MODE_BMSK))) |
++			(mode & NOC_QOS_MODEn_MODE_BMSK)),
++			NOC_QOS_MODEn_ADDR(base, qos_off, mport, qos_delta));
++	}
++	/* Ensure qos mode is set before exiting */
++	wmb();
++}
++
++static void noc_set_qos_priority(void __iomem *base, uint32_t qos_off,
++		uint32_t mport, uint32_t qos_delta,
++		struct msm_bus_noc_qos_priority *priority)
++{
++	uint32_t reg_val, val;
++
++	reg_val = readl_relaxed(NOC_QOS_PRIORITYn_ADDR(base, qos_off, mport,
++		qos_delta)) & NOC_QOS_PRIORITYn_RMSK;
++	val = priority->p1 << NOC_QOS_PRIORITYn_P1_SHFT;
++	writel_relaxed(((reg_val & (~(NOC_QOS_PRIORITYn_P1_BMSK))) |
++		(val & NOC_QOS_PRIORITYn_P1_BMSK)),
++		NOC_QOS_PRIORITYn_ADDR(base, qos_off, mport, qos_delta));
++
++	reg_val = readl_relaxed(NOC_QOS_PRIORITYn_ADDR(base, qos_off, mport,
++								qos_delta))
++		& NOC_QOS_PRIORITYn_RMSK;
++	writel_relaxed(((reg_val & (~(NOC_QOS_PRIORITYn_P0_BMSK))) |
++		(priority->p0 & NOC_QOS_PRIORITYn_P0_BMSK)),
++		NOC_QOS_PRIORITYn_ADDR(base, qos_off, mport, qos_delta));
++	/* Ensure qos priority is set before exiting */
++	wmb();
++}
++
++static void msm_bus_noc_set_qos_bw(void __iomem *base, uint32_t qos_off,
++		uint32_t qos_freq, uint32_t mport, uint32_t qos_delta,
++		uint8_t perm_mode, struct msm_bus_noc_qos_bw *qbw)
++{
++	uint32_t reg_val, val, mode;
++
++	if (!qos_freq) {
++		MSM_BUS_DBG("Zero QoS Freq\n");
++		return;
++	}
++
++
++	/* If Limiter or Regulator modes are not supported, bw not available*/
++	if (perm_mode & (NOC_QOS_PERM_MODE_LIMITER |
++		NOC_QOS_PERM_MODE_REGULATOR)) {
++		uint32_t bw_val = noc_bw_field(qbw->bw, qos_freq);
++		uint32_t sat_val = noc_sat_field(qbw->bw, qbw->ws,
++			qos_freq);
++
++		MSM_BUS_DBG("NOC: BW: perm_mode: %d bw_val: %d, sat_val: %d\n",
++			perm_mode, bw_val, sat_val);
++		/*
++		 * If in Limiter/Regulator mode, first go to fixed mode.
++		 * Clear QoS accumulator
++		 **/
++		mode = readl_relaxed(NOC_QOS_MODEn_ADDR(base, qos_off,
++			mport, qos_delta)) & NOC_QOS_MODEn_MODE_BMSK;
++		if (mode == NOC_QOS_MODE_REGULATOR || mode ==
++			NOC_QOS_MODE_LIMITER) {
++			reg_val = readl_relaxed(NOC_QOS_MODEn_ADDR(
++				base, qos_off, mport, qos_delta));
++			val = NOC_QOS_MODE_FIXED;
++			writel_relaxed((reg_val & (~(NOC_QOS_MODEn_MODE_BMSK)))
++				| (val & NOC_QOS_MODEn_MODE_BMSK),
++				NOC_QOS_MODEn_ADDR(base, qos_off, mport,
++								qos_delta));
++		}
++
++		reg_val = readl_relaxed(NOC_QOS_BWn_ADDR(base, qos_off, mport,
++								qos_delta));
++		val = bw_val << NOC_QOS_BWn_BW_SHFT;
++		writel_relaxed(((reg_val & (~(NOC_QOS_BWn_BW_BMSK))) |
++			(val & NOC_QOS_BWn_BW_BMSK)),
++			NOC_QOS_BWn_ADDR(base, qos_off, mport, qos_delta));
++
++		MSM_BUS_DBG("NOC: BW: Wrote value: 0x%x\n", ((reg_val &
++			(~NOC_QOS_BWn_BW_BMSK)) | (val &
++			NOC_QOS_BWn_BW_BMSK)));
++
++		reg_val = readl_relaxed(NOC_QOS_SATn_ADDR(base, qos_off,
++			mport, qos_delta));
++		val = sat_val << NOC_QOS_SATn_SAT_SHFT;
++		writel_relaxed(((reg_val & (~(NOC_QOS_SATn_SAT_BMSK))) |
++			(val & NOC_QOS_SATn_SAT_BMSK)),
++			NOC_QOS_SATn_ADDR(base, qos_off, mport, qos_delta));
++
++		MSM_BUS_DBG("NOC: SAT: Wrote value: 0x%x\n", ((reg_val &
++			(~NOC_QOS_SATn_SAT_BMSK)) | (val &
++			NOC_QOS_SATn_SAT_BMSK)));
++
++		/* Set mode back to what it was initially */
++		reg_val = readl_relaxed(NOC_QOS_MODEn_ADDR(base, qos_off,
++			mport, qos_delta));
++		writel_relaxed((reg_val & (~(NOC_QOS_MODEn_MODE_BMSK)))
++			| (mode & NOC_QOS_MODEn_MODE_BMSK),
++			NOC_QOS_MODEn_ADDR(base, qos_off, mport, qos_delta));
++		/* Ensure that all writes for bandwidth registers have
++		 * completed before returning
++		 */
++		wmb();
++	}
++}
++
++uint8_t msm_bus_noc_get_qos_mode(void __iomem *base, uint32_t qos_off,
++	uint32_t mport, uint32_t qos_delta, uint32_t mode, uint32_t perm_mode)
++{
++	if (NOC_QOS_MODES_ALL_PERM == perm_mode)
++		return readl_relaxed(NOC_QOS_MODEn_ADDR(base, qos_off,
++			mport, qos_delta)) & NOC_QOS_MODEn_MODE_BMSK;
++	else
++		return 31 - __CLZ(mode &
++			NOC_QOS_MODES_ALL_PERM);
++}
++
++void msm_bus_noc_get_qos_priority(void __iomem *base, uint32_t qos_off,
++	uint32_t mport, uint32_t qos_delta,
++	struct msm_bus_noc_qos_priority *priority)
++{
++	priority->p1 = (readl_relaxed(NOC_QOS_PRIORITYn_ADDR(base, qos_off,
++		mport, qos_delta)) & NOC_QOS_PRIORITYn_P1_BMSK) >>
++		NOC_QOS_PRIORITYn_P1_SHFT;
++
++	priority->p0 = (readl_relaxed(NOC_QOS_PRIORITYn_ADDR(base, qos_off,
++		mport, qos_delta)) & NOC_QOS_PRIORITYn_P0_BMSK) >>
++		NOC_QOS_PRIORITYn_P0_SHFT;
++}
++
++void msm_bus_noc_get_qos_bw(void __iomem *base, uint32_t qos_off,
++	uint32_t qos_freq,
++	uint32_t mport, uint32_t qos_delta, uint8_t perm_mode,
++	struct msm_bus_noc_qos_bw *qbw)
++{
++	if (perm_mode & (NOC_QOS_PERM_MODE_LIMITER |
++		NOC_QOS_PERM_MODE_REGULATOR)) {
++		uint32_t bw_val = readl_relaxed(NOC_QOS_BWn_ADDR(
++			base, qos_off, mport, qos_delta)) & NOC_QOS_BWn_BW_BMSK;
++		uint32_t sat = readl_relaxed(NOC_QOS_SATn_ADDR(
++			base, qos_off, mport, qos_delta))
++						& NOC_QOS_SATn_SAT_BMSK;
++
++		qbw->bw = noc_bw(bw_val, qos_freq);
++		qbw->ws = noc_ws(qbw->bw, sat, qos_freq);
++	} else {
++		qbw->bw = 0;
++		qbw->ws = 0;
++	}
++}
++
++static int msm_bus_noc_mas_init(struct msm_bus_noc_info *ninfo,
++	struct msm_bus_inode_info *info)
++{
++	int i;
++	struct msm_bus_noc_qos_priority *prio;
++	prio = kzalloc(sizeof(struct msm_bus_noc_qos_priority),
++		GFP_KERNEL);
++	if (!prio) {
++		MSM_BUS_WARN("Couldn't alloc prio data for node: %d\n",
++			info->node_info->id);
++		return -ENOMEM;
++	}
++
++	prio->read_prio = info->node_info->prio_rd;
++	prio->write_prio = info->node_info->prio_wr;
++	prio->p1 = info->node_info->prio1;
++	prio->p0 = info->node_info->prio0;
++	info->hw_data = (void *)prio;
++
++	if (!info->node_info->qport) {
++		MSM_BUS_DBG("No QoS Ports to init\n");
++		return 0;
++	}
++
++	for (i = 0; i < info->node_info->num_mports; i++) {
++		if (info->node_info->mode != NOC_QOS_MODE_BYPASS) {
++			noc_set_qos_priority(ninfo->base, ninfo->qos_baseoffset,
++				info->node_info->qport[i], ninfo->qos_delta,
++				prio);
++
++			if (info->node_info->mode != NOC_QOS_MODE_FIXED) {
++				struct msm_bus_noc_qos_bw qbw;
++				qbw.ws = info->node_info->ws;
++				qbw.bw = 0;
++				msm_bus_noc_set_qos_bw(ninfo->base,
++					ninfo->qos_baseoffset,
++					ninfo->qos_freq, info->node_info->
++					qport[i], ninfo->qos_delta,
++					info->node_info->perm_mode,
++					&qbw);
++			}
++		}
++
++		noc_set_qos_mode(ninfo->base, ninfo->qos_baseoffset,
++			info->node_info->qport[i], ninfo->qos_delta,
++			info->node_info->mode,
++			info->node_info->perm_mode);
++	}
++
++	return 0;
++}
++
++static void msm_bus_noc_node_init(void *hw_data,
++	struct msm_bus_inode_info *info)
++{
++	struct msm_bus_noc_info *ninfo =
++		(struct msm_bus_noc_info *)hw_data;
++
++	if (!IS_SLAVE(info->node_info->priv_id))
++		if (info->node_info->hw_sel != MSM_BUS_RPM)
++			msm_bus_noc_mas_init(ninfo, info);
++}
++
++static int msm_bus_noc_allocate_commit_data(struct msm_bus_fabric_registration
++	*fab_pdata, void **cdata, int ctx)
++{
++	struct msm_bus_noc_commit **cd = (struct msm_bus_noc_commit **)cdata;
++	struct msm_bus_noc_info *ninfo =
++		(struct msm_bus_noc_info *)fab_pdata->hw_data;
++
++	*cd = kzalloc(sizeof(struct msm_bus_noc_commit), GFP_KERNEL);
++	if (!*cd) {
++		MSM_BUS_DBG("Couldn't alloc mem for cdata\n");
++		return -ENOMEM;
++	}
++
++	(*cd)->mas = ninfo->cdata[ctx].mas;
++	(*cd)->slv = ninfo->cdata[ctx].slv;
++
++	return 0;
++}
++
++static void *msm_bus_noc_allocate_noc_data(struct platform_device *pdev,
++	struct msm_bus_fabric_registration *fab_pdata)
++{
++	struct resource *noc_mem;
++	struct resource *noc_io;
++	struct msm_bus_noc_info *ninfo;
++	int i;
++
++	ninfo = kzalloc(sizeof(struct msm_bus_noc_info), GFP_KERNEL);
++	if (!ninfo) {
++		MSM_BUS_DBG("Couldn't alloc mem for noc info\n");
++		return NULL;
++	}
++
++	ninfo->nmasters = fab_pdata->nmasters;
++	ninfo->nqos_masters = fab_pdata->nmasters;
++	ninfo->nslaves = fab_pdata->nslaves;
++	ninfo->qos_freq = fab_pdata->qos_freq;
++
++	if (!fab_pdata->qos_baseoffset)
++		ninfo->qos_baseoffset = QOS_DEFAULT_BASEOFFSET;
++	else
++		ninfo->qos_baseoffset = fab_pdata->qos_baseoffset;
++
++	if (!fab_pdata->qos_delta)
++		ninfo->qos_delta = QOS_DEFAULT_DELTA;
++	else
++		ninfo->qos_delta = fab_pdata->qos_delta;
++
++	ninfo->mas_modes = kzalloc(sizeof(uint32_t) * fab_pdata->nmasters,
++		GFP_KERNEL);
++	if (!ninfo->mas_modes) {
++		MSM_BUS_DBG("Couldn't alloc mem for noc master-modes\n");
++		kfree(ninfo);
++		return NULL;
++	}
++
++	for (i = 0; i < NUM_CTX; i++) {
++		ninfo->cdata[i].mas = kzalloc(sizeof(struct
++			msm_bus_node_hw_info) * fab_pdata->nmasters * 2,
++			GFP_KERNEL);
++		if (!ninfo->cdata[i].mas) {
++			MSM_BUS_DBG("Couldn't alloc mem for noc master-bw\n");
++			kfree(ninfo->mas_modes);
++			kfree(ninfo);
++			return NULL;
++		}
++
++		ninfo->cdata[i].slv = kzalloc(sizeof(struct
++			msm_bus_node_hw_info) * fab_pdata->nslaves * 2,
++			GFP_KERNEL);
++		if (!ninfo->cdata[i].slv) {
++			MSM_BUS_DBG("Couldn't alloc mem for noc master-bw\n");
++			kfree(ninfo->cdata[i].mas);
++			goto err;
++		}
++	}
++
++	/* If it's a virtual fabric, don't get memory info */
++	if (fab_pdata->virt)
++		goto skip_mem;
++
++	noc_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!noc_mem && !fab_pdata->virt) {
++		MSM_BUS_ERR("Cannot get NoC Base address\n");
++		goto err;
++	}
++
++	noc_io = request_mem_region(noc_mem->start,
++			resource_size(noc_mem), pdev->name);
++	if (!noc_io) {
++		MSM_BUS_ERR("NoC memory unavailable\n");
++		goto err;
++	}
++
++	ninfo->base = ioremap(noc_mem->start, resource_size(noc_mem));
++	if (!ninfo->base) {
++		MSM_BUS_ERR("IOremap failed for NoC!\n");
++		release_mem_region(noc_mem->start, resource_size(noc_mem));
++		goto err;
++	}
++
++skip_mem:
++	fab_pdata->hw_data = (void *)ninfo;
++	return (void *)ninfo;
++
++err:
++	kfree(ninfo->mas_modes);
++	kfree(ninfo);
++	return NULL;
++}
++
++static void free_commit_data(void *cdata)
++{
++	struct msm_bus_noc_commit *cd = (struct msm_bus_noc_commit *)cdata;
++
++	kfree(cd->mas);
++	kfree(cd->slv);
++	kfree(cd);
++}
++
++static bool msm_bus_noc_update_bw_reg(int mode)
++{
++	bool ret = false;
++
++	if ((mode == NOC_QOS_MODE_LIMITER) ||
++			(mode == NOC_QOS_MODE_REGULATOR))
++			ret = true;
++
++	return ret;
++}
++
++static void msm_bus_noc_update_bw(struct msm_bus_inode_info *hop,
++	struct msm_bus_inode_info *info,
++	struct msm_bus_fabric_registration *fab_pdata,
++	void *sel_cdata, int *master_tiers,
++	int64_t add_bw)
++{
++	struct msm_bus_noc_info *ninfo;
++	struct msm_bus_noc_qos_bw qos_bw;
++	int i, ports;
++	int64_t bw;
++	struct msm_bus_noc_commit *sel_cd =
++		(struct msm_bus_noc_commit *)sel_cdata;
++
++	ninfo = (struct msm_bus_noc_info *)fab_pdata->hw_data;
++	if (!ninfo->qos_freq) {
++		MSM_BUS_DBG("NOC: No qos frequency to update bw\n");
++		return;
++	}
++
++	if (info->node_info->num_mports == 0) {
++		MSM_BUS_DBG("NOC: Skip Master BW\n");
++		goto skip_mas_bw;
++	}
++
++	ports = info->node_info->num_mports;
++	bw = INTERLEAVED_BW(fab_pdata, add_bw, ports);
++
++	MSM_BUS_DBG("NOC: Update bw for: %d: %lld\n",
++		info->node_info->priv_id, add_bw);
++	for (i = 0; i < ports; i++) {
++		sel_cd->mas[info->node_info->masterp[i]].bw += bw;
++		sel_cd->mas[info->node_info->masterp[i]].hw_id =
++			info->node_info->mas_hw_id;
++		MSM_BUS_DBG("NOC: Update mas_bw: ID: %d, BW: %llu ports:%d\n",
++			info->node_info->priv_id,
++			sel_cd->mas[info->node_info->masterp[i]].bw,
++			ports);
++		/* Check if info is a shared master.
++		 * If it is, mark it dirty
++		 * If it isn't, then set QOS Bandwidth
++		 **/
++		if (info->node_info->hw_sel == MSM_BUS_RPM)
++			sel_cd->mas[info->node_info->masterp[i]].dirty = 1;
++		else {
++			if (!info->node_info->qport) {
++				MSM_BUS_DBG("No qos ports to update!\n");
++				break;
++			}
++
++			if (!(info->node_info->mode == NOC_QOS_MODE_REGULATOR)
++					|| (info->node_info->mode ==
++						NOC_QOS_MODE_LIMITER)) {
++				MSM_BUS_DBG("Skip QoS reg programming\n");
++				break;
++			}
++			qos_bw.bw = sel_cd->mas[info->node_info->masterp[i]].
++				bw;
++			qos_bw.ws = info->node_info->ws;
++			msm_bus_noc_set_qos_bw(ninfo->base,
++				ninfo->qos_baseoffset,
++				ninfo->qos_freq,
++				info->node_info->qport[i], ninfo->qos_delta,
++				info->node_info->perm_mode, &qos_bw);
++			MSM_BUS_DBG("NOC: QoS: Update mas_bw: ws: %u\n",
++				qos_bw.ws);
++		}
++	}
++
++skip_mas_bw:
++	ports = hop->node_info->num_sports;
++	for (i = 0; i < ports; i++) {
++		sel_cd->slv[hop->node_info->slavep[i]].bw += add_bw;
++		sel_cd->slv[hop->node_info->slavep[i]].hw_id =
++			hop->node_info->slv_hw_id;
++		MSM_BUS_DBG("NOC: Update slave_bw for ID: %d -> %llu\n",
++			hop->node_info->priv_id,
++			sel_cd->slv[hop->node_info->slavep[i]].bw);
++		MSM_BUS_DBG("NOC: Update slave_bw for hw_id: %d, index: %d\n",
++			hop->node_info->slv_hw_id, hop->node_info->slavep[i]);
++		/* Check if hop is a shared slave.
++		 * If it is, mark it dirty
++		 * If it isn't, then nothing to be done as the
++		 * slaves are in bypass mode.
++		 **/
++		if (hop->node_info->hw_sel == MSM_BUS_RPM)
++			sel_cd->slv[hop->node_info->slavep[i]].dirty = 1;
++	}
++}
++
++static int msm_bus_noc_commit(struct msm_bus_fabric_registration
++	*fab_pdata, void *hw_data, void **cdata)
++{
++	MSM_BUS_DBG("\nReached NOC Commit\n");
++	msm_bus_remote_hw_commit(fab_pdata, hw_data, cdata);
++	return 0;
++}
++
++static int msm_bus_noc_port_halt(uint32_t haltid, uint8_t mport)
++{
++	return 0;
++}
++
++static int msm_bus_noc_port_unhalt(uint32_t haltid, uint8_t mport)
++{
++	return 0;
++}
++
++static int msm_bus_noc_qos_init(struct msm_bus_node_device_type *info,
++				void __iomem *qos_base,
++				uint32_t qos_off, uint32_t qos_delta,
++				uint32_t qos_freq)
++{
++	struct msm_bus_noc_qos_priority prio;
++	int ret = 0;
++	int i;
++
++	prio.p1 = info->node_info->qos_params.prio1;
++	prio.p0 = info->node_info->qos_params.prio0;
++
++	if (!info->node_info->qport) {
++		MSM_BUS_DBG("No QoS Ports to init\n");
++		ret = 0;
++		goto err_qos_init;
++	}
++
++	for (i = 0; i < info->node_info->num_qports; i++) {
++		if (info->node_info->qos_params.mode != NOC_QOS_MODE_BYPASS) {
++			noc_set_qos_priority(qos_base, qos_off,
++					info->node_info->qport[i], qos_delta,
++					&prio);
++
++			if (info->node_info->qos_params.mode !=
++							NOC_QOS_MODE_FIXED) {
++				struct msm_bus_noc_qos_bw qbw;
++				qbw.ws = info->node_info->qos_params.ws;
++				qbw.bw = 0;
++				msm_bus_noc_set_qos_bw(qos_base, qos_off,
++					qos_freq,
++					info->node_info->qport[i],
++					qos_delta,
++					info->node_info->qos_params.mode,
++					&qbw);
++			}
++		}
++
++		noc_set_qos_mode(qos_base, qos_off, info->node_info->qport[i],
++				qos_delta, info->node_info->qos_params.mode,
++				(1 << info->node_info->qos_params.mode));
++	}
++err_qos_init:
++	return ret;
++}
++
++static int msm_bus_noc_set_bw(struct msm_bus_node_device_type *dev,
++				void __iomem *qos_base,
++				uint32_t qos_off, uint32_t qos_delta,
++				uint32_t qos_freq)
++{
++	int ret = 0;
++	uint64_t bw = 0;
++	int i;
++	struct msm_bus_node_info_type *info = dev->node_info;
++
++	if (info && info->num_qports &&
++		((info->qos_params.mode == NOC_QOS_MODE_REGULATOR) ||
++		(info->qos_params.mode ==
++			NOC_QOS_MODE_LIMITER))) {
++		struct msm_bus_noc_qos_bw qos_bw;
++
++		bw = msm_bus_div64(info->num_qports,
++				dev->node_ab.ab[DUAL_CTX]);
++
++		for (i = 0; i < info->num_qports; i++) {
++			if (!info->qport) {
++				MSM_BUS_DBG("No qos ports to update!\n");
++				break;
++			}
++
++			qos_bw.bw = bw;
++			qos_bw.ws = info->qos_params.ws;
++			msm_bus_noc_set_qos_bw(qos_base, qos_off, qos_freq,
++				info->qport[i], qos_delta,
++				info->qos_params.mode, &qos_bw);
++			MSM_BUS_DBG("NOC: QoS: Update mas_bw: ws: %u\n",
++				qos_bw.ws);
++		}
++	}
++	return ret;
++}
++int msm_bus_noc_hw_init(struct msm_bus_fabric_registration *pdata,
++	struct msm_bus_hw_algorithm *hw_algo)
++{
++	/* Set interleaving to true by default */
++	pdata->il_flag = true;
++	hw_algo->allocate_commit_data = msm_bus_noc_allocate_commit_data;
++	hw_algo->allocate_hw_data = msm_bus_noc_allocate_noc_data;
++	hw_algo->node_init = msm_bus_noc_node_init;
++	hw_algo->free_commit_data = free_commit_data;
++	hw_algo->update_bw = msm_bus_noc_update_bw;
++	hw_algo->commit = msm_bus_noc_commit;
++	hw_algo->port_halt = msm_bus_noc_port_halt;
++	hw_algo->port_unhalt = msm_bus_noc_port_unhalt;
++	hw_algo->update_bw_reg = msm_bus_noc_update_bw_reg;
++	hw_algo->config_master = NULL;
++	hw_algo->config_limiter = NULL;
++
++	return 0;
++}
++
++int msm_bus_noc_set_ops(struct msm_bus_node_device_type *bus_dev)
++{
++	if (!bus_dev)
++		return -ENODEV;
++	else {
++		bus_dev->fabdev->noc_ops.qos_init = msm_bus_noc_qos_init;
++		bus_dev->fabdev->noc_ops.set_bw = msm_bus_noc_set_bw;
++		bus_dev->fabdev->noc_ops.limit_mport = NULL;
++		bus_dev->fabdev->noc_ops.update_bw_reg =
++						msm_bus_noc_update_bw_reg;
++	}
++	return 0;
++}
++EXPORT_SYMBOL(msm_bus_noc_set_ops);
+--- /dev/null
++++ b/drivers/bus/msm_bus/msm_bus_noc.h
+@@ -0,0 +1,76 @@
++/* Copyright (c) 2012-2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++
++#ifndef _ARCH_ARM_MACH_MSM_BUS_BIMC_H
++#define _ARCH_ARM_MACH_MSM_BUS_BIMC_H
++
++enum msm_bus_noc_qos_mode_type {
++	NOC_QOS_MODE_FIXED = 0,
++	NOC_QOS_MODE_LIMITER,
++	NOC_QOS_MODE_BYPASS,
++	NOC_QOS_MODE_REGULATOR,
++	NOC_QOS_MODE_MAX,
++};
++
++enum msm_bus_noc_qos_mode_perm {
++	NOC_QOS_PERM_MODE_FIXED = (1 << NOC_QOS_MODE_FIXED),
++	NOC_QOS_PERM_MODE_LIMITER = (1 << NOC_QOS_MODE_LIMITER),
++	NOC_QOS_PERM_MODE_BYPASS = (1 << NOC_QOS_MODE_BYPASS),
++	NOC_QOS_PERM_MODE_REGULATOR = (1 << NOC_QOS_MODE_REGULATOR),
++};
++
++#define NOC_QOS_MODES_ALL_PERM (NOC_QOS_PERM_MODE_FIXED | \
++	NOC_QOS_PERM_MODE_LIMITER | NOC_QOS_PERM_MODE_BYPASS | \
++	NOC_QOS_PERM_MODE_REGULATOR)
++
++struct msm_bus_noc_commit {
++	struct msm_bus_node_hw_info *mas;
++	struct msm_bus_node_hw_info *slv;
++};
++
++struct msm_bus_noc_info {
++	void __iomem *base;
++	uint32_t base_addr;
++	uint32_t nmasters;
++	uint32_t nqos_masters;
++	uint32_t nslaves;
++	uint32_t qos_freq; /* QOS Clock in KHz */
++	uint32_t qos_baseoffset;
++	uint32_t qos_delta;
++	uint32_t *mas_modes;
++	struct msm_bus_noc_commit cdata[NUM_CTX];
++};
++
++struct msm_bus_noc_qos_priority {
++	uint32_t high_prio;
++	uint32_t low_prio;
++	uint32_t read_prio;
++	uint32_t write_prio;
++	uint32_t p1;
++	uint32_t p0;
++};
++
++struct msm_bus_noc_qos_bw {
++	uint64_t bw; /* Bandwidth in bytes per second */
++	uint32_t ws; /* Window size in nano seconds */
++};
++
++void msm_bus_noc_init(struct msm_bus_noc_info *ninfo);
++uint8_t msm_bus_noc_get_qos_mode(void __iomem *base, uint32_t qos_off,
++	uint32_t mport, uint32_t qos_delta, uint32_t mode, uint32_t perm_mode);
++void msm_bus_noc_get_qos_priority(void __iomem *base, uint32_t qos_off,
++	uint32_t mport, uint32_t qos_delta,
++	struct msm_bus_noc_qos_priority *qprio);
++void msm_bus_noc_get_qos_bw(void __iomem *base, uint32_t qos_off,
++	uint32_t qos_freq, uint32_t mport, uint32_t qos_delta,
++	uint8_t perm_mode, struct msm_bus_noc_qos_bw *qbw);
++#endif /*_ARCH_ARM_MACH_MSM_BUS_NOC_H */
+--- /dev/null
++++ b/drivers/bus/msm_bus/msm_bus_of.c
+@@ -0,0 +1,705 @@
++/* Copyright (c) 2012-2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++
++#define pr_fmt(fmt) "AXI: %s(): " fmt, __func__
++
++#include <linux/module.h>
++#include <linux/slab.h>
++#include <linux/string.h>
++#include <linux/of.h>
++#include <linux/of_device.h>
++#include <linux/platform_device.h>
++#include "msm-bus.h"
++#include "msm-bus-board.h"
++#include "msm_bus_core.h"
++
++static const char * const hw_sel_name[] = {"RPM", "NoC", "BIMC", NULL};
++static const char * const mode_sel_name[] = {"Fixed", "Limiter", "Bypass",
++						"Regulator", NULL};
++
++static int get_num(const char *const str[], const char *name)
++{
++	int i = 0;
++
++	do {
++		if (!strcmp(name, str[i]))
++			return i;
++
++		i++;
++	} while (str[i] != NULL);
++
++	pr_err("Error: string %s not found\n", name);
++	return -EINVAL;
++}
++
++#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_MSM_BUS_SCALING)
++static struct msm_bus_scale_pdata *get_pdata(struct platform_device *pdev,
++	struct device_node *of_node)
++{
++	struct msm_bus_scale_pdata *pdata = NULL;
++	struct msm_bus_paths *usecase = NULL;
++	int i = 0, j, ret, num_usecases = 0, num_paths, len;
++	const uint32_t *vec_arr = NULL;
++	bool mem_err = false;
++
++	if (!pdev) {
++		pr_err("Error: Null Platform device\n");
++		return NULL;
++	}
++
++	pdata = devm_kzalloc(&pdev->dev, sizeof(struct msm_bus_scale_pdata),
++		GFP_KERNEL);
++	if (!pdata) {
++		pr_err("Error: Memory allocation for pdata failed\n");
++		mem_err = true;
++		goto err;
++	}
++
++	ret = of_property_read_string(of_node, "qcom,msm-bus,name",
++		&pdata->name);
++	if (ret) {
++		pr_err("Error: Client name not found\n");
++		goto err;
++	}
++
++	ret = of_property_read_u32(of_node, "qcom,msm-bus,num-cases",
++		&num_usecases);
++	if (ret) {
++		pr_err("Error: num-usecases not found\n");
++		goto err;
++	}
++
++	pdata->num_usecases = num_usecases;
++
++	if (of_property_read_bool(of_node, "qcom,msm-bus,active-only"))
++		pdata->active_only = 1;
++	else {
++		pr_debug("active_only flag absent.\n");
++		pr_debug("Using dual context by default\n");
++	}
++
++	usecase = devm_kzalloc(&pdev->dev, (sizeof(struct msm_bus_paths) *
++		pdata->num_usecases), GFP_KERNEL);
++	if (!usecase) {
++		pr_err("Error: Memory allocation for paths failed\n");
++		mem_err = true;
++		goto err;
++	}
++
++	ret = of_property_read_u32(of_node, "qcom,msm-bus,num-paths",
++		&num_paths);
++	if (ret) {
++		pr_err("Error: num_paths not found\n");
++		goto err;
++	}
++
++	vec_arr = of_get_property(of_node, "qcom,msm-bus,vectors-KBps", &len);
++	if (vec_arr == NULL) {
++		pr_err("Error: Vector array not found\n");
++		goto err;
++	}
++
++	if (len != num_usecases * num_paths * sizeof(uint32_t) * 4) {
++		pr_err("Error: Length-error on getting vectors\n");
++		goto err;
++	}
++
++	for (i = 0; i < num_usecases; i++) {
++		usecase[i].num_paths = num_paths;
++		usecase[i].vectors = devm_kzalloc(&pdev->dev, num_paths *
++			sizeof(struct msm_bus_vectors), GFP_KERNEL);
++		if (!usecase[i].vectors) {
++			mem_err = true;
++			pr_err("Error: Mem alloc failure in vectors\n");
++			goto err;
++		}
++
++		for (j = 0; j < num_paths; j++) {
++			int index = ((i * num_paths) + j) * 4;
++			usecase[i].vectors[j].src = be32_to_cpu(vec_arr[index]);
++			usecase[i].vectors[j].dst =
++				be32_to_cpu(vec_arr[index + 1]);
++			usecase[i].vectors[j].ab = (uint64_t)
++				KBTOB(be32_to_cpu(vec_arr[index + 2]));
++			usecase[i].vectors[j].ib = (uint64_t)
++				KBTOB(be32_to_cpu(vec_arr[index + 3]));
++		}
++	}
++
++	pdata->usecase = usecase;
++	return pdata;
++err:
++	if (mem_err) {
++		for (; i > 0; i--)
++			kfree(usecase[i-1].vectors);
++
++		kfree(usecase);
++		kfree(pdata);
++	}
++
++	return NULL;
++}
++
++/**
++ * msm_bus_cl_get_pdata() - Generate bus client data from device tree
++ * provided by clients.
++ *
++ * of_node: Device tree node to extract information from
++ *
++ * The function returns a valid pointer to the allocated bus-scale-pdata
++ * if the vectors were correctly read from the client's device node.
++ * Any error in reading or parsing the device node will return NULL
++ * to the caller.
++ */
++struct msm_bus_scale_pdata *msm_bus_cl_get_pdata(struct platform_device *pdev)
++{
++	struct device_node *of_node;
++	struct msm_bus_scale_pdata *pdata = NULL;
++
++	if (!pdev) {
++		pr_err("Error: Null Platform device\n");
++		return NULL;
++	}
++
++	of_node = pdev->dev.of_node;
++	pdata = get_pdata(pdev, of_node);
++	if (!pdata) {
++		pr_err("client has to provide missing entry for successful registration\n");
++		return NULL;
++	}
++
++	return pdata;
++}
++EXPORT_SYMBOL(msm_bus_cl_get_pdata);
++
++/**
++ * msm_bus_cl_pdata_from_node() - Generate bus client data from device tree
++ * node provided by clients. This function should be used when a client
++ * driver needs to register multiple bus-clients from a single device-tree
++ * node associated with the platform-device.
++ *
++ * of_node: The subnode containing information about the bus scaling
++ * data
++ *
++ * pdev: Platform device associated with the device-tree node
++ *
++ * The function returns a valid pointer to the allocated bus-scale-pdata
++ * if the vectors were correctly read from the client's device node.
++ * Any error in reading or parsing the device node will return NULL
++ * to the caller.
++ */
++struct msm_bus_scale_pdata *msm_bus_pdata_from_node(
++		struct platform_device *pdev, struct device_node *of_node)
++{
++	struct msm_bus_scale_pdata *pdata = NULL;
++
++	if (!pdev) {
++		pr_err("Error: Null Platform device\n");
++		return NULL;
++	}
++
++	if (!of_node) {
++		pr_err("Error: Null of_node passed to bus driver\n");
++		return NULL;
++	}
++
++	pdata = get_pdata(pdev, of_node);
++	if (!pdata) {
++		pr_err("client has to provide missing entry for successful registration\n");
++		return NULL;
++	}
++
++	return pdata;
++}
++EXPORT_SYMBOL(msm_bus_pdata_from_node);
++
++/**
++ * msm_bus_cl_clear_pdata() - Clear pdata allocated from device-tree
++ * of_node: Device tree node to extract information from
++ */
++void msm_bus_cl_clear_pdata(struct msm_bus_scale_pdata *pdata)
++{
++	int i;
++
++	for (i = 0; i < pdata->num_usecases; i++)
++		kfree(pdata->usecase[i].vectors);
++
++	kfree(pdata->usecase);
++	kfree(pdata);
++}
++EXPORT_SYMBOL(msm_bus_cl_clear_pdata);
++#endif
++
++static int *get_arr(struct platform_device *pdev,
++		const struct device_node *node, const char *prop,
++		int *nports)
++{
++	int size = 0, ret;
++	int *arr = NULL;
++
++	if (of_get_property(node, prop, &size)) {
++		*nports = size / sizeof(int);
++	} else {
++		pr_debug("Property %s not available\n", prop);
++		*nports = 0;
++		return NULL;
++	}
++
++	if (!size) {
++		*nports = 0;
++		return NULL;
++	}
++
++	arr = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
++	if (ZERO_OR_NULL_PTR(arr)) {
++		pr_err("Error: Failed to alloc mem for %s\n", prop);
++		return NULL;
++	}
++
++	ret = of_property_read_u32_array(node, prop, (u32 *)arr, *nports);
++	if (ret) {
++		pr_err("Error in reading property: %s\n", prop);
++		goto err;
++	}
++
++	return arr;
++err:
++	devm_kfree(&pdev->dev, arr);
++	return NULL;
++}
++
++static u64 *get_th_params(struct platform_device *pdev,
++		const struct device_node *node, const char *prop,
++		int *nports)
++{
++	int size = 0, ret;
++	u64 *ret_arr = NULL;
++	int *arr = NULL;
++	int i;
++
++	if (of_get_property(node, prop, &size)) {
++		*nports = size / sizeof(int);
++	} else {
++		pr_debug("Property %s not available\n", prop);
++		*nports = 0;
++		return NULL;
++	}
++
++	if (!size) {
++		*nports = 0;
++		return NULL;
++	}
++
++	ret_arr = devm_kzalloc(&pdev->dev, (*nports * sizeof(u64)),
++							GFP_KERNEL);
++	if (ZERO_OR_NULL_PTR(ret_arr)) {
++		pr_err("Error: Failed to alloc mem for ret arr %s\n", prop);
++		return NULL;
++	}
++
++	arr = kzalloc(size, GFP_KERNEL);
++	if ((ZERO_OR_NULL_PTR(arr))) {
++		pr_err("Error: Failed to alloc temp mem for %s\n", prop);
++		return NULL;
++	}
++
++	ret = of_property_read_u32_array(node, prop, (u32 *)arr, *nports);
++	if (ret) {
++		pr_err("Error in reading property: %s\n", prop);
++		goto err;
++	}
++
++	for (i = 0; i < *nports; i++)
++		ret_arr[i] = (uint64_t)KBTOB(arr[i]);
++
++	MSM_BUS_DBG("%s: num entries %d prop %s", __func__, *nports, prop);
++
++	for (i = 0; i < *nports; i++)
++		MSM_BUS_DBG("Th %d val %llu", i, ret_arr[i]);
++
++	kfree(arr);
++	return ret_arr;
++err:
++	kfree(arr);
++	devm_kfree(&pdev->dev, ret_arr);
++	return NULL;
++}
++
++static struct msm_bus_node_info *get_nodes(struct device_node *of_node,
++	struct platform_device *pdev,
++	struct msm_bus_fabric_registration *pdata)
++{
++	struct msm_bus_node_info *info;
++	struct device_node *child_node = NULL;
++	int i = 0, ret;
++	int num_bw = 0;
++	u32 temp;
++
++	for_each_child_of_node(of_node, child_node) {
++		i++;
++	}
++
++	pdata->len = i;
++	info = (struct msm_bus_node_info *)
++		devm_kzalloc(&pdev->dev, sizeof(struct msm_bus_node_info) *
++			pdata->len, GFP_KERNEL);
++	if (ZERO_OR_NULL_PTR(info)) {
++		pr_err("Failed to alloc memory for nodes: %d\n", pdata->len);
++		goto err;
++	}
++
++	i = 0;
++	child_node = NULL;
++	for_each_child_of_node(of_node, child_node) {
++		const char *sel_str;
++
++		ret = of_property_read_string(child_node, "label",
++			&info[i].name);
++		if (ret)
++			pr_err("Error reading node label\n");
++
++		ret = of_property_read_u32(child_node, "cell-id", &info[i].id);
++		if (ret) {
++			pr_err("Error reading node id\n");
++			goto err;
++		}
++
++		if (of_property_read_bool(child_node, "qcom,gateway"))
++			info[i].gateway = 1;
++
++		of_property_read_u32(child_node, "qcom,mas-hw-id",
++			&info[i].mas_hw_id);
++
++		of_property_read_u32(child_node, "qcom,slv-hw-id",
++			&info[i].slv_hw_id);
++		info[i].masterp = get_arr(pdev, child_node,
++					"qcom,masterp", &info[i].num_mports);
++		/* No need to store number of qports */
++		info[i].qport = get_arr(pdev, child_node,
++					"qcom,qport", &ret);
++		pdata->nmasters += info[i].num_mports;
++
++
++		info[i].slavep = get_arr(pdev, child_node,
++					"qcom,slavep", &info[i].num_sports);
++		pdata->nslaves += info[i].num_sports;
++
++
++		info[i].tier = get_arr(pdev, child_node,
++					"qcom,tier", &info[i].num_tiers);
++
++		if (of_property_read_bool(child_node, "qcom,ahb"))
++			info[i].ahb = 1;
++
++		ret = of_property_read_string(child_node, "qcom,hw-sel",
++			&sel_str);
++		if (ret)
++			info[i].hw_sel = 0;
++		else {
++			ret =  get_num(hw_sel_name, sel_str);
++			if (ret < 0) {
++				pr_err("Invalid hw-sel\n");
++				goto err;
++			}
++
++			info[i].hw_sel = ret;
++		}
++
++		of_property_read_u32(child_node, "qcom,buswidth",
++			&info[i].buswidth);
++		of_property_read_u32(child_node, "qcom,ws", &info[i].ws);
++
++		info[i].dual_conf =
++			of_property_read_bool(child_node, "qcom,dual-conf");
++
++
++		info[i].th = get_th_params(pdev, child_node, "qcom,thresh",
++						&info[i].num_thresh);
++
++		info[i].bimc_bw = get_th_params(pdev, child_node,
++						"qcom,bimc,bw", &num_bw);
++
++		if (num_bw != info[i].num_thresh) {
++			pr_err("%s:num_bw %d must equal num_thresh %d",
++				__func__, num_bw, info[i].num_thresh);
++			pr_err("%s:Err setting up dual conf for %s",
++				__func__, info[i].name);
++			goto err;
++		}
++
++		of_property_read_u32(child_node, "qcom,bimc,gp",
++			&info[i].bimc_gp);
++		of_property_read_u32(child_node, "qcom,bimc,thmp",
++			&info[i].bimc_thmp);
++
++		ret = of_property_read_string(child_node, "qcom,mode-thresh",
++			&sel_str);
++		if (ret)
++			info[i].mode_thresh = 0;
++		else {
++			ret = get_num(mode_sel_name, sel_str);
++			if (ret < 0) {
++				pr_err("Unknown mode :%s\n", sel_str);
++				goto err;
++			}
++
++			info[i].mode_thresh = ret;
++			MSM_BUS_DBG("AXI: THreshold mode set: %d\n",
++					info[i].mode_thresh);
++		}
++
++		ret = of_property_read_string(child_node, "qcom,mode",
++				&sel_str);
++
++		if (ret)
++			info[i].mode = 0;
++		else {
++			ret = get_num(mode_sel_name, sel_str);
++			if (ret < 0) {
++				pr_err("Unknown mode :%s\n", sel_str);
++				goto err;
++			}
++
++			info[i].mode = ret;
++		}
++
++		info[i].nr_lim =
++			of_property_read_bool(child_node, "qcom,nr-lim");
++
++		ret = of_property_read_u32(child_node, "qcom,ff",
++							&info[i].ff);
++		if (ret) {
++			pr_debug("fudge factor not present %d", info[i].id);
++			info[i].ff = 0;
++		}
++
++		ret = of_property_read_u32(child_node, "qcom,floor-bw",
++						&temp);
++		if (ret) {
++			pr_debug("fabdev floor bw not present %d", info[i].id);
++			info[i].floor_bw = 0;
++		} else {
++			info[i].floor_bw = KBTOB(temp);
++		}
++
++		info[i].rt_mas =
++			of_property_read_bool(child_node, "qcom,rt-mas");
++
++		ret = of_property_read_string(child_node, "qcom,perm-mode",
++			&sel_str);
++		if (ret)
++			info[i].perm_mode = 0;
++		else {
++			ret = get_num(mode_sel_name, sel_str);
++			if (ret < 0)
++				goto err;
++
++			info[i].perm_mode = 1 << ret;
++		}
++
++		of_property_read_u32(child_node, "qcom,prio-lvl",
++			&info[i].prio_lvl);
++		of_property_read_u32(child_node, "qcom,prio-rd",
++			&info[i].prio_rd);
++		of_property_read_u32(child_node, "qcom,prio-wr",
++			&info[i].prio_wr);
++		of_property_read_u32(child_node, "qcom,prio0", &info[i].prio0);
++		of_property_read_u32(child_node, "qcom,prio1", &info[i].prio1);
++		ret = of_property_read_string(child_node, "qcom,slaveclk-dual",
++			&info[i].slaveclk[DUAL_CTX]);
++		if (!ret)
++			pr_debug("Got slaveclk_dual: %s\n",
++				info[i].slaveclk[DUAL_CTX]);
++		else
++			info[i].slaveclk[DUAL_CTX] = NULL;
++
++		ret = of_property_read_string(child_node,
++			"qcom,slaveclk-active", &info[i].slaveclk[ACTIVE_CTX]);
++		if (!ret)
++			pr_debug("Got slaveclk_active\n");
++		else
++			info[i].slaveclk[ACTIVE_CTX] = NULL;
++
++		ret = of_property_read_string(child_node, "qcom,memclk-dual",
++			&info[i].memclk[DUAL_CTX]);
++		if (!ret)
++			pr_debug("Got memclk_dual\n");
++		else
++			info[i].memclk[DUAL_CTX] = NULL;
++
++		ret = of_property_read_string(child_node, "qcom,memclk-active",
++			&info[i].memclk[ACTIVE_CTX]);
++		if (!ret)
++			pr_debug("Got memclk_active\n");
++		else
++			info[i].memclk[ACTIVE_CTX] = NULL;
++
++		ret = of_property_read_string(child_node, "qcom,iface-clk-node",
++			&info[i].iface_clk_node);
++		if (!ret)
++			pr_debug("Got iface_clk_node\n");
++		else
++			info[i].iface_clk_node = NULL;
++
++		pr_debug("Node name: %s\n", info[i].name);
++		of_node_put(child_node);
++		i++;
++	}
++
++	pr_debug("Bus %d added: %d masters\n", pdata->id, pdata->nmasters);
++	pr_debug("Bus %d added: %d slaves\n", pdata->id, pdata->nslaves);
++	return info;
++err:
++	return NULL;
++}
++
++void msm_bus_of_get_nfab(struct platform_device *pdev,
++		struct msm_bus_fabric_registration *pdata)
++{
++	struct device_node *of_node;
++	int ret, nfab = 0;
++
++	if (!pdev) {
++		pr_err("Error: Null platform device\n");
++		return;
++	}
++
++	of_node = pdev->dev.of_node;
++	ret = of_property_read_u32(of_node, "qcom,nfab",
++		&nfab);
++	if (!ret)
++		pr_debug("Fab_of: Read number of buses: %u\n", nfab);
++
++	msm_bus_board_set_nfab(pdata, nfab);
++}
++
++struct msm_bus_fabric_registration
++	*msm_bus_of_get_fab_data(struct platform_device *pdev)
++{
++	struct device_node *of_node;
++	struct msm_bus_fabric_registration *pdata;
++	bool mem_err = false;
++	int ret = 0;
++	const char *sel_str;
++	u32 temp;
++
++	if (!pdev) {
++		pr_err("Error: Null platform device\n");
++		return NULL;
++	}
++
++	of_node = pdev->dev.of_node;
++	pdata = devm_kzalloc(&pdev->dev,
++			sizeof(struct msm_bus_fabric_registration), GFP_KERNEL);
++	if (!pdata) {
++		pr_err("Error: Memory allocation for pdata failed\n");
++		mem_err = true;
++		goto err;
++	}
++
++	ret = of_property_read_string(of_node, "label", &pdata->name);
++	if (ret) {
++		pr_err("Error: label not found\n");
++		goto err;
++	}
++	pr_debug("Fab_of: Read name: %s\n", pdata->name);
++
++	ret = of_property_read_u32(of_node, "cell-id",
++		&pdata->id);
++	if (ret) {
++		pr_err("Error: num-usecases not found\n");
++		goto err;
++	}
++	pr_debug("Fab_of: Read id: %u\n", pdata->id);
++
++	if (of_property_read_bool(of_node, "qcom,ahb"))
++		pdata->ahb = 1;
++
++	ret = of_property_read_string(of_node, "qcom,fabclk-dual",
++		&pdata->fabclk[DUAL_CTX]);
++	if (ret) {
++		pr_debug("fabclk_dual not available\n");
++		pdata->fabclk[DUAL_CTX] = NULL;
++	} else
++		pr_debug("Fab_of: Read clk dual ctx: %s\n",
++			pdata->fabclk[DUAL_CTX]);
++	ret = of_property_read_string(of_node, "qcom,fabclk-active",
++		&pdata->fabclk[ACTIVE_CTX]);
++	if (ret) {
++		pr_debug("Error: fabclk_active not available\n");
++		pdata->fabclk[ACTIVE_CTX] = NULL;
++	} else
++		pr_debug("Fab_of: Read clk act ctx: %s\n",
++			pdata->fabclk[ACTIVE_CTX]);
++
++	ret = of_property_read_u32(of_node, "qcom,ntieredslaves",
++		&pdata->ntieredslaves);
++	if (ret) {
++		pr_err("Error: ntieredslaves not found\n");
++		goto err;
++	}
++
++	ret = of_property_read_u32(of_node, "qcom,qos-freq", &pdata->qos_freq);
++	if (ret)
++		pr_debug("qos_freq not available\n");
++
++	ret = of_property_read_string(of_node, "qcom,hw-sel", &sel_str);
++	if (ret) {
++		pr_err("Error: hw_sel not found\n");
++		goto err;
++	} else {
++		ret = get_num(hw_sel_name, sel_str);
++		if (ret < 0)
++			goto err;
++
++		pdata->hw_sel = ret;
++	}
++
++	if (of_property_read_bool(of_node, "qcom,virt"))
++		pdata->virt = true;
++
++	ret = of_property_read_u32(of_node, "qcom,qos-baseoffset",
++						&pdata->qos_baseoffset);
++	if (ret)
++		pr_debug("%s:qos_baseoffset not available\n", __func__);
++
++	ret = of_property_read_u32(of_node, "qcom,qos-delta",
++						&pdata->qos_delta);
++	if (ret)
++		pr_debug("%s:qos_delta not available\n", __func__);
++
++	if (of_property_read_bool(of_node, "qcom,rpm-en"))
++		pdata->rpm_enabled = 1;
++
++	ret = of_property_read_u32(of_node, "qcom,nr-lim-thresh",
++						&temp);
++
++	if (ret) {
++		pr_err("nr-lim threshold not specified");
++		pdata->nr_lim_thresh = 0;
++	} else {
++		pdata->nr_lim_thresh = KBTOB(temp);
++	}
++
++	ret = of_property_read_u32(of_node, "qcom,eff-fact",
++						&pdata->eff_fact);
++	if (ret) {
++		pr_err("Fab eff-factor not present");
++		pdata->eff_fact = 0;
++	}
++
++	pdata->info = get_nodes(of_node, pdev, pdata);
++	return pdata;
++err:
++	return NULL;
++}
++EXPORT_SYMBOL(msm_bus_of_get_fab_data);
+--- /dev/null
++++ b/drivers/bus/msm_bus/msm_bus_of_adhoc.c
+@@ -0,0 +1,641 @@
++/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++
++#define pr_fmt(fmt) "AXI: %s(): " fmt, __func__
++
++#include <linux/clk.h>
++#include <linux/device.h>
++#include <linux/module.h>
++#include <linux/slab.h>
++#include <linux/string.h>
++#include <linux/of.h>
++#include <linux/of_device.h>
++#include <linux/platform_device.h>
++#include "msm-bus.h"
++#include "msm-bus-board.h"
++#include "msm_bus_rules.h"
++#include "msm_bus_core.h"
++#include "msm_bus_adhoc.h"
++
++#define DEFAULT_QOS_FREQ	19200
++#define DEFAULT_UTIL_FACT	100
++#define DEFAULT_VRAIL_COMP	100
++
++static int get_qos_mode(struct platform_device *pdev,
++			struct device_node *node, const char *qos_mode)
++{
++	const char *qos_names[] = {"fixed", "limiter", "bypass", "regulator"};
++	int i = 0;
++	int ret = -1;
++
++	if (!qos_mode)
++		goto exit_get_qos_mode;
++
++	for (i = 0; i < ARRAY_SIZE(qos_names); i++) {
++		if (!strcmp(qos_mode, qos_names[i]))
++			break;
++	}
++	if (i == ARRAY_SIZE(qos_names))
++		dev_err(&pdev->dev, "Cannot match mode qos %s using Bypass",
++				qos_mode);
++	else
++		ret = i;
++
++exit_get_qos_mode:
++	return ret;
++}
++
++static int *get_arr(struct platform_device *pdev,
++		struct device_node *node, const char *prop,
++		int *nports)
++{
++	int size = 0, ret;
++	int *arr = NULL;
++
++	if (of_get_property(node, prop, &size)) {
++		*nports = size / sizeof(int);
++	} else {
++		dev_dbg(&pdev->dev, "Property %s not available\n", prop);
++		*nports = 0;
++		return NULL;
++	}
++
++	arr = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
++	if ((size > 0) && ZERO_OR_NULL_PTR(arr)) {
++		dev_err(&pdev->dev, "Error: Failed to alloc mem for %s\n",
++				prop);
++		return NULL;
++	}
++
++	ret = of_property_read_u32_array(node, prop, (u32 *)arr, *nports);
++	if (ret) {
++		dev_err(&pdev->dev, "Error in reading property: %s\n", prop);
++		goto arr_err;
++	}
++
++	return arr;
++arr_err:
++	devm_kfree(&pdev->dev, arr);
++	return NULL;
++}
++
++static struct msm_bus_fab_device_type *get_fab_device_info(
++		struct device_node *dev_node,
++		struct platform_device *pdev)
++{
++	struct msm_bus_fab_device_type *fab_dev;
++	unsigned int ret;
++	struct resource *res;
++	const char *base_name;
++
++	fab_dev = devm_kzalloc(&pdev->dev,
++			sizeof(struct msm_bus_fab_device_type),
++			GFP_KERNEL);
++	if (!fab_dev) {
++		dev_err(&pdev->dev,
++			"Error: Unable to allocate memory for fab_dev\n");
++		return NULL;
++	}
++
++	ret = of_property_read_string(dev_node, "qcom,base-name", &base_name);
++	if (ret) {
++		dev_err(&pdev->dev, "Error: Unable to get base address name\n");
++		goto fab_dev_err;
++	}
++
++	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, base_name);
++	if (!res) {
++		dev_err(&pdev->dev, "Error getting qos base addr %s\n",
++								base_name);
++		goto fab_dev_err;
++	}
++	fab_dev->pqos_base = res->start;
++	fab_dev->qos_range = resource_size(res);
++	fab_dev->bypass_qos_prg = of_property_read_bool(dev_node,
++						"qcom,bypass-qos-prg");
++
++	ret = of_property_read_u32(dev_node, "qcom,base-offset",
++			&fab_dev->base_offset);
++	if (ret)
++		dev_dbg(&pdev->dev, "Bus base offset is missing\n");
++
++	ret = of_property_read_u32(dev_node, "qcom,qos-off",
++			&fab_dev->qos_off);
++	if (ret)
++		dev_dbg(&pdev->dev, "Bus qos off is missing\n");
++
++
++	ret = of_property_read_u32(dev_node, "qcom,bus-type",
++						&fab_dev->bus_type);
++	if (ret) {
++		dev_warn(&pdev->dev, "Bus type is missing\n");
++		goto fab_dev_err;
++	}
++
++	ret = of_property_read_u32(dev_node, "qcom,qos-freq",
++						&fab_dev->qos_freq);
++	if (ret) {
++		dev_dbg(&pdev->dev, "Bus qos freq is missing\n");
++		fab_dev->qos_freq = DEFAULT_QOS_FREQ;
++	}
++
++	ret = of_property_read_u32(dev_node, "qcom,util-fact",
++						&fab_dev->util_fact);
++	if (ret) {
++		dev_info(&pdev->dev, "Util-fact is missing, default to %d\n",
++				DEFAULT_UTIL_FACT);
++		fab_dev->util_fact = DEFAULT_UTIL_FACT;
++	}
++
++	ret = of_property_read_u32(dev_node, "qcom,vrail-comp",
++						&fab_dev->vrail_comp);
++	if (ret) {
++		dev_info(&pdev->dev, "Vrail-comp is missing, default to %d\n",
++				DEFAULT_VRAIL_COMP);
++		fab_dev->vrail_comp = DEFAULT_VRAIL_COMP;
++	}
++
++	return fab_dev;
++
++fab_dev_err:
++	devm_kfree(&pdev->dev, fab_dev);
++	fab_dev = 0;
++	return NULL;
++}
++
++static void get_qos_params(
++		struct device_node * const dev_node,
++		struct platform_device * const pdev,
++		struct msm_bus_node_info_type *node_info)
++{
++	const char *qos_mode = NULL;
++	unsigned int ret;
++	unsigned int temp;
++
++	ret = of_property_read_string(dev_node, "qcom,qos-mode", &qos_mode);
++
++	if (ret)
++		node_info->qos_params.mode = -1;
++	else
++		node_info->qos_params.mode = get_qos_mode(pdev, dev_node,
++								qos_mode);
++
++	of_property_read_u32(dev_node, "qcom,prio-lvl",
++					&node_info->qos_params.prio_lvl);
++
++	of_property_read_u32(dev_node, "qcom,prio1",
++						&node_info->qos_params.prio1);
++
++	of_property_read_u32(dev_node, "qcom,prio0",
++						&node_info->qos_params.prio0);
++
++	of_property_read_u32(dev_node, "qcom,prio-rd",
++					&node_info->qos_params.prio_rd);
++
++	of_property_read_u32(dev_node, "qcom,prio-wr",
++						&node_info->qos_params.prio_wr);
++
++	of_property_read_u32(dev_node, "qcom,gp",
++						&node_info->qos_params.gp);
++
++	of_property_read_u32(dev_node, "qcom,thmp",
++						&node_info->qos_params.thmp);
++
++	of_property_read_u32(dev_node, "qcom,ws",
++						&node_info->qos_params.ws);
++
++	ret = of_property_read_u32(dev_node, "qcom,bw_buffer", &temp);
++
++	if (ret)
++		node_info->qos_params.bw_buffer = 0;
++	else
++		node_info->qos_params.bw_buffer = KBTOB(temp);
++
++}
++
++
++static struct msm_bus_node_info_type *get_node_info_data(
++		struct device_node * const dev_node,
++		struct platform_device * const pdev)
++{
++	struct msm_bus_node_info_type *node_info;
++	unsigned int ret;
++	int size;
++	int i;
++	struct device_node *con_node;
++	struct device_node *bus_dev;
++
++	node_info = devm_kzalloc(&pdev->dev,
++			sizeof(struct msm_bus_node_info_type),
++			GFP_KERNEL);
++	if (!node_info) {
++		dev_err(&pdev->dev,
++			"Error: Unable to allocate memory for node_info\n");
++		return NULL;
++	}
++
++	ret = of_property_read_u32(dev_node, "cell-id", &node_info->id);
++	if (ret) {
++		dev_warn(&pdev->dev, "Bus node is missing cell-id\n");
++		goto node_info_err;
++	}
++	ret = of_property_read_string(dev_node, "label", &node_info->name);
++	if (ret) {
++		dev_warn(&pdev->dev, "Bus node is missing name\n");
++		goto node_info_err;
++	}
++	node_info->qport = get_arr(pdev, dev_node, "qcom,qport",
++			&node_info->num_qports);
++
++	if (of_get_property(dev_node, "qcom,connections", &size)) {
++		node_info->num_connections = size / sizeof(int);
++		node_info->connections = devm_kzalloc(&pdev->dev, size,
++				GFP_KERNEL);
++	} else {
++		node_info->num_connections = 0;
++		node_info->connections = 0;
++	}
++
++	for (i = 0; i < node_info->num_connections; i++) {
++		con_node = of_parse_phandle(dev_node, "qcom,connections", i);
++		if (IS_ERR_OR_NULL(con_node))
++			goto node_info_err;
++
++		if (of_property_read_u32(con_node, "cell-id",
++				&node_info->connections[i]))
++			goto node_info_err;
++		of_node_put(con_node);
++	}
++
++	if (of_get_property(dev_node, "qcom,blacklist", &size)) {
++		node_info->num_blist = size/sizeof(u32);
++		node_info->black_listed_connections = devm_kzalloc(&pdev->dev,
++		size, GFP_KERNEL);
++	} else {
++		node_info->num_blist = 0;
++		node_info->black_listed_connections = 0;
++	}
++
++	for (i = 0; i < node_info->num_blist; i++) {
++		con_node = of_parse_phandle(dev_node, "qcom,blacklist", i);
++		if (IS_ERR_OR_NULL(con_node))
++			goto node_info_err;
++
++		if (of_property_read_u32(con_node, "cell-id",
++				&node_info->black_listed_connections[i]))
++			goto node_info_err;
++		of_node_put(con_node);
++	}
++
++	bus_dev = of_parse_phandle(dev_node, "qcom,bus-dev", 0);
++	if (!IS_ERR_OR_NULL(bus_dev)) {
++		if (of_property_read_u32(bus_dev, "cell-id",
++			&node_info->bus_device_id)) {
++			dev_err(&pdev->dev, "Can't find bus device. Node %d",
++					node_info->id);
++			goto node_info_err;
++		}
++
++		of_node_put(bus_dev);
++	} else
++		dev_dbg(&pdev->dev, "Can't find bdev phandle for %d",
++					node_info->id);
++
++	node_info->is_fab_dev = of_property_read_bool(dev_node, "qcom,fab-dev");
++	node_info->virt_dev = of_property_read_bool(dev_node, "qcom,virt-dev");
++
++	ret = of_property_read_u32(dev_node, "qcom,buswidth",
++						&node_info->buswidth);
++	if (ret) {
++		dev_dbg(&pdev->dev, "Using default 8 bytes %d", node_info->id);
++		node_info->buswidth = 8;
++	}
++
++	ret = of_property_read_u32(dev_node, "qcom,mas-rpm-id",
++						&node_info->mas_rpm_id);
++	if (ret) {
++		dev_dbg(&pdev->dev, "mas rpm id is missing\n");
++		node_info->mas_rpm_id = -1;
++	}
++
++	ret = of_property_read_u32(dev_node, "qcom,slv-rpm-id",
++						&node_info->slv_rpm_id);
++	if (ret) {
++		dev_dbg(&pdev->dev, "slv rpm id is missing\n");
++		node_info->slv_rpm_id = -1;
++	}
++	ret = of_property_read_u32(dev_node, "qcom,util-fact",
++						&node_info->util_fact);
++	if (ret)
++		node_info->util_fact = 0;
++	ret = of_property_read_u32(dev_node, "qcom,vrail-comp",
++						&node_info->vrail_comp);
++	if (ret)
++		node_info->vrail_comp = 0;
++	get_qos_params(dev_node, pdev, node_info);
++
++	return node_info;
++
++node_info_err:
++	devm_kfree(&pdev->dev, node_info);
++	node_info = 0;
++	return NULL;
++}
++
++static unsigned int get_bus_node_device_data(
++		struct device_node * const dev_node,
++		struct platform_device * const pdev,
++		struct msm_bus_node_device_type * const node_device)
++{
++	node_device->node_info = get_node_info_data(dev_node, pdev);
++	if (IS_ERR_OR_NULL(node_device->node_info)) {
++		dev_err(&pdev->dev, "Error: Node info missing\n");
++		return -ENODATA;
++	}
++	node_device->ap_owned = of_property_read_bool(dev_node,
++							"qcom,ap-owned");
++
++	if (node_device->node_info->is_fab_dev) {
++		dev_dbg(&pdev->dev, "Dev %d\n", node_device->node_info->id);
++
++		if (!node_device->node_info->virt_dev) {
++			node_device->fabdev =
++				get_fab_device_info(dev_node, pdev);
++			if (IS_ERR_OR_NULL(node_device->fabdev)) {
++				dev_err(&pdev->dev,
++					"Error: Fabric device info missing\n");
++				devm_kfree(&pdev->dev, node_device->node_info);
++				return -ENODATA;
++			}
++		}
++		node_device->clk[DUAL_CTX].clk = of_clk_get_by_name(dev_node,
++							"bus_clk");
++
++		if (IS_ERR_OR_NULL(node_device->clk[DUAL_CTX].clk))
++			dev_dbg(&pdev->dev,
++				"%s:Failed to get bus clk for bus%d ctx%d",
++				__func__, node_device->node_info->id,
++								DUAL_CTX);
++
++		node_device->clk[ACTIVE_CTX].clk = of_clk_get_by_name(dev_node,
++							"bus_a_clk");
++		if (IS_ERR_OR_NULL(node_device->clk[ACTIVE_CTX].clk))
++			dev_err(&pdev->dev,
++				"Failed to get bus clk for bus%d ctx%d",
++				 node_device->node_info->id, ACTIVE_CTX);
++		if (msmbus_coresight_init_adhoc(pdev, dev_node))
++			dev_warn(&pdev->dev,
++				 "Coresight support absent for bus: %d\n",
++				  node_device->node_info->id);
++	} else {
++		node_device->qos_clk.clk = of_clk_get_by_name(dev_node,
++							"bus_qos_clk");
++
++		if (IS_ERR_OR_NULL(node_device->qos_clk.clk))
++			dev_dbg(&pdev->dev,
++				"%s:Failed to get bus qos clk for mas%d",
++				__func__, node_device->node_info->id);
++
++		node_device->clk[DUAL_CTX].clk = of_clk_get_by_name(dev_node,
++							"node_clk");
++
++		if (IS_ERR_OR_NULL(node_device->clk[DUAL_CTX].clk))
++			dev_dbg(&pdev->dev,
++				"%s:Failed to get bus clk for bus%d ctx%d",
++				__func__, node_device->node_info->id,
++								DUAL_CTX);
++
++	}
++	return 0;
++}
++
++struct msm_bus_device_node_registration
++	*msm_bus_of_to_pdata(struct platform_device *pdev)
++{
++	struct device_node *of_node, *child_node;
++	struct msm_bus_device_node_registration *pdata;
++	unsigned int i = 0, j;
++	unsigned int ret;
++
++	if (!pdev) {
++		pr_err("Error: Null platform device\n");
++		return NULL;
++	}
++
++	of_node = pdev->dev.of_node;
++
++	pdata = devm_kzalloc(&pdev->dev,
++			sizeof(struct msm_bus_device_node_registration),
++			GFP_KERNEL);
++	if (!pdata) {
++		dev_err(&pdev->dev,
++				"Error: Memory allocation for pdata failed\n");
++		return NULL;
++	}
++
++	pdata->num_devices = of_get_child_count(of_node);
++
++	pdata->info = devm_kzalloc(&pdev->dev,
++			sizeof(struct msm_bus_node_device_type) *
++			pdata->num_devices, GFP_KERNEL);
++
++	if (!pdata->info) {
++		dev_err(&pdev->dev,
++			"Error: Memory allocation for pdata->info failed\n");
++		goto node_reg_err;
++	}
++
++	ret = 0;
++	for_each_child_of_node(of_node, child_node) {
++		ret = get_bus_node_device_data(child_node, pdev,
++				&pdata->info[i]);
++		if (ret) {
++			dev_err(&pdev->dev, "Error: unable to initialize bus nodes\n");
++			goto node_reg_err_1;
++		}
++		i++;
++	}
++
++	dev_dbg(&pdev->dev, "bus topology:\n");
++	for (i = 0; i < pdata->num_devices; i++) {
++		dev_dbg(&pdev->dev, "id %d\nnum_qports %d\nnum_connections %d",
++				pdata->info[i].node_info->id,
++				pdata->info[i].node_info->num_qports,
++				pdata->info[i].node_info->num_connections);
++		dev_dbg(&pdev->dev, "\nbus_device_id %d\n buswidth %d\n",
++				pdata->info[i].node_info->bus_device_id,
++				pdata->info[i].node_info->buswidth);
++		for (j = 0; j < pdata->info[i].node_info->num_connections;
++									j++) {
++			dev_dbg(&pdev->dev, "connection[%d]: %d\n", j,
++				pdata->info[i].node_info->connections[j]);
++		}
++		for (j = 0; j < pdata->info[i].node_info->num_blist;
++									 j++) {
++			dev_dbg(&pdev->dev, "black_listed_node[%d]: %d\n", j,
++				pdata->info[i].node_info->
++				black_listed_connections[j]);
++		}
++		if (pdata->info[i].fabdev)
++			dev_dbg(&pdev->dev, "base_addr %zu\nbus_type %d\n",
++					(size_t)pdata->info[i].
++						fabdev->pqos_base,
++					pdata->info[i].fabdev->bus_type);
++	}
++	return pdata;
++
++node_reg_err_1:
++	devm_kfree(&pdev->dev, pdata->info);
++node_reg_err:
++	devm_kfree(&pdev->dev, pdata);
++	pdata = NULL;
++	return NULL;
++}
++
++static int msm_bus_of_get_ids(struct platform_device *pdev,
++			struct device_node *dev_node, int **dev_ids,
++			int *num_ids, char *prop_name)
++{
++	int ret = 0;
++	int size, i;
++	struct device_node *rule_node;
++	int *ids = NULL;
++
++	if (of_get_property(dev_node, prop_name, &size)) {
++		*num_ids = size / sizeof(int);
++		ids = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
++	} else {
++		dev_err(&pdev->dev, "No rule nodes, skipping node");
++		ret = -ENXIO;
++		goto exit_get_ids;
++	}
++
++	*dev_ids = ids;
++	for (i = 0; i < *num_ids; i++) {
++		rule_node = of_parse_phandle(dev_node, prop_name, i);
++		if (IS_ERR_OR_NULL(rule_node)) {
++			dev_err(&pdev->dev, "Can't get rule node id");
++			ret = -ENXIO;
++			goto err_get_ids;
++		}
++
++		if (of_property_read_u32(rule_node, "cell-id",
++				&ids[i])) {
++			dev_err(&pdev->dev, "Can't get rule node id");
++			ret = -ENXIO;
++			goto err_get_ids;
++		}
++		of_node_put(rule_node);
++	}
++exit_get_ids:
++	return ret;
++err_get_ids:
++	devm_kfree(&pdev->dev, ids);
++	of_node_put(rule_node);
++	ids = NULL;
++	return ret;
++}
++
++int msm_bus_of_get_static_rules(struct platform_device *pdev,
++					struct bus_rule_type **static_rules)
++{
++	int ret = 0;
++	struct device_node *of_node, *child_node;
++	int num_rules = 0;
++	int rule_idx = 0;
++	int bw_fld = 0;
++	int i;
++	struct bus_rule_type *static_rule = NULL;
++
++	of_node = pdev->dev.of_node;
++	num_rules = of_get_child_count(of_node);
++	static_rule = devm_kzalloc(&pdev->dev,
++				sizeof(struct bus_rule_type) * num_rules,
++				GFP_KERNEL);
++
++	if (IS_ERR_OR_NULL(static_rule)) {
++		ret = -ENOMEM;
++		goto exit_static_rules;
++	}
++
++	*static_rules = static_rule;
++	for_each_child_of_node(of_node, child_node) {
++		ret = msm_bus_of_get_ids(pdev, child_node,
++			&static_rule[rule_idx].src_id,
++			&static_rule[rule_idx].num_src,
++			"qcom,src-nodes");
++
++		ret = msm_bus_of_get_ids(pdev, child_node,
++			&static_rule[rule_idx].dst_node,
++			&static_rule[rule_idx].num_dst,
++			"qcom,dest-node");
++
++		ret = of_property_read_u32(child_node, "qcom,src-field",
++				&static_rule[rule_idx].src_field);
++		if (ret) {
++			dev_err(&pdev->dev, "src-field missing");
++			ret = -ENXIO;
++			goto err_static_rules;
++		}
++
++		ret = of_property_read_u32(child_node, "qcom,src-op",
++				&static_rule[rule_idx].op);
++		if (ret) {
++			dev_err(&pdev->dev, "src-op missing");
++			ret = -ENXIO;
++			goto err_static_rules;
++		}
++
++		ret = of_property_read_u32(child_node, "qcom,mode",
++				&static_rule[rule_idx].mode);
++		if (ret) {
++			dev_err(&pdev->dev, "mode missing");
++			ret = -ENXIO;
++			goto err_static_rules;
++		}
++
++		ret = of_property_read_u32(child_node, "qcom,thresh", &bw_fld);
++		if (ret) {
++			dev_err(&pdev->dev, "thresh missing");
++			ret = -ENXIO;
++			goto err_static_rules;
++		} else
++			static_rule[rule_idx].thresh = KBTOB(bw_fld);
++
++		ret = of_property_read_u32(child_node, "qcom,dest-bw",
++								&bw_fld);
++		if (ret)
++			static_rule[rule_idx].dst_bw = 0;
++		else
++			static_rule[rule_idx].dst_bw = KBTOB(bw_fld);
++
++		rule_idx++;
++	}
++	ret = rule_idx;
++exit_static_rules:
++	return ret;
++err_static_rules:
++	for (i = 0; i < num_rules; i++) {
++		if (!IS_ERR_OR_NULL(static_rule)) {
++			if (!IS_ERR_OR_NULL(static_rule[i].src_id))
++				devm_kfree(&pdev->dev,
++						static_rule[i].src_id);
++			if (!IS_ERR_OR_NULL(static_rule[i].dst_node))
++				devm_kfree(&pdev->dev,
++						static_rule[i].dst_node);
++			devm_kfree(&pdev->dev, static_rule);
++		}
++	}
++	devm_kfree(&pdev->dev, *static_rules);
++	static_rules = NULL;
++	return ret;
++}
+--- /dev/null
++++ b/drivers/bus/msm_bus/msm_bus_rules.c
+@@ -0,0 +1,624 @@
++/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/list_sort.h>
++#include <linux/slab.h>
++#include <linux/types.h>
++#include "msm-bus-board.h"
++#include "msm_bus_rules.h"
++#include <trace/events/trace_msm_bus.h>
++
++struct node_vote_info {
++	int id;
++	u64 ib;
++	u64 ab;
++	u64 clk;
++};
++
++struct rules_def {
++	int rule_id;
++	int num_src;
++	int state;
++	struct node_vote_info *src_info;
++	struct bus_rule_type rule_ops;
++	bool state_change;
++	struct list_head link;
++};
++
++struct rule_node_info {
++	int id;
++	void *data;
++	struct raw_notifier_head rule_notify_list;
++	int cur_rule;
++	int num_rules;
++	struct list_head node_rules;
++	struct list_head link;
++	struct rule_apply_rcm_info apply;
++};
++
++DEFINE_MUTEX(msm_bus_rules_lock);
++static LIST_HEAD(node_list);
++static struct rule_node_info *get_node(u32 id, void *data);
++
++#define LE(op1, op2)	(op1 <= op2)
++#define LT(op1, op2)	(op1 < op2)
++#define GE(op1, op2)	(op1 >= op2)
++#define GT(op1, op2)	(op1 > op2)
++#define NB_ID		(0x201)
++
++static struct rule_node_info *get_node(u32 id, void *data)
++{
++	struct rule_node_info *node_it = NULL;
++	struct rule_node_info *node_match = NULL;
++
++	list_for_each_entry(node_it, &node_list, link) {
++		if (node_it->id == id) {
++			if ((id == NB_ID)) {
++				if ((node_it->data == data)) {
++					node_match = node_it;
++					break;
++				}
++			} else {
++				node_match = node_it;
++				break;
++			}
++		}
++	}
++	return node_match;
++}
++
++static struct rule_node_info *gen_node(u32 id, void *data)
++{
++	struct rule_node_info *node_it = NULL;
++	struct rule_node_info *node_match = NULL;
++
++	list_for_each_entry(node_it, &node_list, link) {
++		if (node_it->id == id) {
++			node_match = node_it;
++			break;
++		}
++	}
++
++	if (!node_match) {
++		node_match = kzalloc(sizeof(struct rule_node_info), GFP_KERNEL);
++		if (!node_match) {
++			pr_err("%s: Cannot allocate memory", __func__);
++			goto exit_node_match;
++		}
++
++		node_match->id = id;
++		node_match->cur_rule = -1;
++		node_match->num_rules = 0;
++		node_match->data = data;
++		list_add_tail(&node_match->link, &node_list);
++		INIT_LIST_HEAD(&node_match->node_rules);
++		RAW_INIT_NOTIFIER_HEAD(&node_match->rule_notify_list);
++		pr_debug("Added new node %d to list\n", id);
++	}
++exit_node_match:
++	return node_match;
++}
++
++static bool do_compare_op(u64 op1, u64 op2, int op)
++{
++	bool ret = false;
++
++	switch (op) {
++	case OP_LE:
++		ret = LE(op1, op2);
++		break;
++	case OP_LT:
++		ret = LT(op1, op2);
++		break;
++	case OP_GT:
++		ret = GT(op1, op2);
++		break;
++	case OP_GE:
++		ret = GE(op1, op2);
++		break;
++	case OP_NOOP:
++		ret = true;
++		break;
++	default:
++		pr_info("Invalid OP %d", op);
++		break;
++	}
++	return ret;
++}
++
++static void update_src_id_vote(struct rule_update_path_info *inp_node,
++				struct rule_node_info *rule_node)
++{
++	struct rules_def *rule;
++	int i;
++
++	list_for_each_entry(rule, &rule_node->node_rules, link) {
++		for (i = 0; i < rule->num_src; i++) {
++			if (rule->src_info[i].id == inp_node->id) {
++				rule->src_info[i].ib = inp_node->ib;
++				rule->src_info[i].ab = inp_node->ab;
++				rule->src_info[i].clk = inp_node->clk;
++			}
++		}
++	}
++}
++
++static u64 get_field(struct rules_def *rule, int src_id)
++{
++	u64 field = 0;
++	int i;
++
++	for (i = 0; i < rule->num_src; i++) {
++		switch (rule->rule_ops.src_field) {
++		case FLD_IB:
++			field += rule->src_info[i].ib;
++			break;
++		case FLD_AB:
++			field += rule->src_info[i].ab;
++			break;
++		case FLD_CLK:
++			field += rule->src_info[i].clk;
++			break;
++		}
++	}
++
++	return field;
++}
++
++static bool check_rule(struct rules_def *rule,
++			struct rule_update_path_info *inp)
++{
++	bool ret = false;
++
++	if (!rule)
++		return ret;
++
++	switch (rule->rule_ops.op) {
++	case OP_LE:
++	case OP_LT:
++	case OP_GT:
++	case OP_GE:
++	{
++		u64 src_field = get_field(rule, inp->id);
++		if (!src_field)
++			ret = false;
++		else
++			ret = do_compare_op(src_field, rule->rule_ops.thresh,
++							rule->rule_ops.op);
++		break;
++	}
++	default:
++		pr_err("Unsupported op %d", rule->rule_ops.op);
++		break;
++	}
++	return ret;
++}
++
++static void match_rule(struct rule_update_path_info *inp_node,
++			struct rule_node_info *node)
++{
++	struct rules_def *rule;
++	int i;
++
++	list_for_each_entry(rule, &node->node_rules, link) {
++		for (i = 0; i < rule->num_src; i++) {
++			if (rule->src_info[i].id == inp_node->id) {
++				if (check_rule(rule, inp_node)) {
++					trace_bus_rules_matches(node->cur_rule,
++						inp_node->id, inp_node->ab,
++						inp_node->ib, inp_node->clk);
++					if (rule->state ==
++						RULE_STATE_NOT_APPLIED)
++						rule->state_change = true;
++					rule->state = RULE_STATE_APPLIED;
++				} else {
++					if (rule->state ==
++						RULE_STATE_APPLIED)
++						rule->state_change = true;
++					rule->state = RULE_STATE_NOT_APPLIED;
++				}
++			}
++		}
++	}
++}
++
++static void apply_rule(struct rule_node_info *node,
++			struct list_head *output_list)
++{
++	struct rules_def *rule;
++
++	node->cur_rule = -1;
++	list_for_each_entry(rule, &node->node_rules, link) {
++		if ((rule->state == RULE_STATE_APPLIED) &&
++						(node->cur_rule == -1))
++			node->cur_rule = rule->rule_id;
++
++		if (node->id == NB_ID) {
++			if (rule->state_change) {
++				rule->state_change = false;
++				raw_notifier_call_chain(&node->rule_notify_list,
++					rule->state, (void *)&rule->rule_ops);
++			}
++		} else {
++			if ((rule->state == RULE_STATE_APPLIED) &&
++				(node->cur_rule == rule->rule_id)) {
++				node->apply.id = rule->rule_ops.dst_node[0];
++				node->apply.throttle = rule->rule_ops.mode;
++				node->apply.lim_bw = rule->rule_ops.dst_bw;
++				list_add_tail(&node->apply.link, output_list);
++			}
++			rule->state_change = false;
++		}
++	}
++
++}
++
++int msm_rules_update_path(struct list_head *input_list,
++			struct list_head *output_list)
++{
++	int ret = 0;
++	struct rule_update_path_info  *inp_node;
++	struct rule_node_info *node_it = NULL;
++
++	mutex_lock(&msm_bus_rules_lock);
++	list_for_each_entry(inp_node, input_list, link) {
++		list_for_each_entry(node_it, &node_list, link) {
++			update_src_id_vote(inp_node, node_it);
++			match_rule(inp_node, node_it);
++		}
++	}
++
++	list_for_each_entry(node_it, &node_list, link)
++		apply_rule(node_it, output_list);
++
++	mutex_unlock(&msm_bus_rules_lock);
++	return ret;
++}
++
++static bool ops_equal(int op1, int op2)
++{
++	bool ret = false;
++
++	switch (op1) {
++	case OP_GT:
++	case OP_GE:
++	case OP_LT:
++	case OP_LE:
++		if (abs(op1 - op2) <= 1)
++			ret = true;
++		break;
++	default:
++		ret = (op1 == op2);
++	}
++
++	return ret;
++}
++
++static int node_rules_compare(void *priv, struct list_head *a,
++					struct list_head *b)
++{
++	struct rules_def *ra = container_of(a, struct rules_def, link);
++	struct rules_def *rb = container_of(b, struct rules_def, link);
++	int ret = -1;
++	int64_t th_diff = 0;
++
++
++	if (ra->rule_ops.mode == rb->rule_ops.mode) {
++		if (ops_equal(ra->rule_ops.op, rb->rule_ops.op)) {
++			if ((ra->rule_ops.op == OP_LT) ||
++				(ra->rule_ops.op == OP_LE)) {
++				th_diff = ra->rule_ops.thresh -
++						rb->rule_ops.thresh;
++				if (th_diff > 0)
++					ret = 1;
++				 else
++					ret = -1;
++			} else if ((ra->rule_ops.op == OP_GT) ||
++					(ra->rule_ops.op == OP_GE)) {
++				th_diff = rb->rule_ops.thresh -
++							ra->rule_ops.thresh;
++				if (th_diff > 0)
++					ret = 1;
++				 else
++					ret = -1;
++			}
++		} else
++			ret = ra->rule_ops.op - rb->rule_ops.op;
++	} else if ((ra->rule_ops.mode == THROTTLE_OFF) &&
++		(rb->rule_ops.mode == THROTTLE_ON)) {
++		ret = 1;
++	} else if ((ra->rule_ops.mode == THROTTLE_ON) &&
++		(rb->rule_ops.mode == THROTTLE_OFF)) {
++		ret = -1;
++	}
++
++	return ret;
++}
++
++static void print_rules(struct rule_node_info *node_it)
++{
++	struct rules_def *node_rule = NULL;
++	int i;
++
++	if (!node_it) {
++		pr_err("%s: no node for found", __func__);
++		return;
++	}
++
++	pr_info("\n Now printing rules for Node %d  cur rule %d\n",
++						node_it->id, node_it->cur_rule);
++	list_for_each_entry(node_rule, &node_it->node_rules, link) {
++		pr_info("\n num Rules %d  rule Id %d\n",
++				node_it->num_rules, node_rule->rule_id);
++		pr_info("Rule: src_field %d\n", node_rule->rule_ops.src_field);
++		for (i = 0; i < node_rule->rule_ops.num_src; i++)
++			pr_info("Rule: src %d\n",
++					node_rule->rule_ops.src_id[i]);
++		for (i = 0; i < node_rule->rule_ops.num_dst; i++)
++			pr_info("Rule: dst %d dst_bw %llu\n",
++						node_rule->rule_ops.dst_node[i],
++						node_rule->rule_ops.dst_bw);
++		pr_info("Rule: thresh %llu op %d mode %d State %d\n",
++					node_rule->rule_ops.thresh,
++					node_rule->rule_ops.op,
++					node_rule->rule_ops.mode,
++					node_rule->state);
++	}
++}
++
++void print_all_rules(void)
++{
++	struct rule_node_info *node_it = NULL;
++
++	list_for_each_entry(node_it, &node_list, link)
++		print_rules(node_it);
++}
++
++void print_rules_buf(char *buf, int max_buf)
++{
++	struct rule_node_info *node_it = NULL;
++	struct rules_def *node_rule = NULL;
++	int i;
++	int cnt = 0;
++
++	list_for_each_entry(node_it, &node_list, link) {
++		cnt += scnprintf(buf + cnt, max_buf - cnt,
++					"\n Now printing rules for Node %d cur_rule %d\n",
++					node_it->id, node_it->cur_rule);
++		list_for_each_entry(node_rule, &node_it->node_rules, link) {
++			cnt += scnprintf(buf + cnt, max_buf - cnt,
++				"\nNum Rules:%d ruleId %d STATE:%d change:%d\n",
++				node_it->num_rules, node_rule->rule_id,
++				node_rule->state, node_rule->state_change);
++			cnt += scnprintf(buf + cnt, max_buf - cnt,
++				"Src_field %d\n",
++				node_rule->rule_ops.src_field);
++			for (i = 0; i < node_rule->rule_ops.num_src; i++)
++				cnt += scnprintf(buf + cnt, max_buf - cnt,
++					"Src %d Cur Ib %llu Ab %llu\n",
++					node_rule->rule_ops.src_id[i],
++					node_rule->src_info[i].ib,
++					node_rule->src_info[i].ab);
++			for (i = 0; i < node_rule->rule_ops.num_dst; i++)
++				cnt += scnprintf(buf + cnt, max_buf - cnt,
++					"Dst %d dst_bw %llu\n",
++					node_rule->rule_ops.dst_node[0],
++					node_rule->rule_ops.dst_bw);
++			cnt += scnprintf(buf + cnt, max_buf - cnt,
++					"Thresh %llu op %d mode %d\n",
++					node_rule->rule_ops.thresh,
++					node_rule->rule_ops.op,
++					node_rule->rule_ops.mode);
++		}
++	}
++}
++
++static int copy_rule(struct bus_rule_type *src, struct rules_def *node_rule,
++			struct notifier_block *nb)
++{
++	int i;
++	int ret = 0;
++
++	memcpy(&node_rule->rule_ops, src,
++				sizeof(struct bus_rule_type));
++	node_rule->rule_ops.src_id = kzalloc(
++			(sizeof(int) * node_rule->rule_ops.num_src),
++							GFP_KERNEL);
++	if (!node_rule->rule_ops.src_id) {
++		pr_err("%s:Failed to allocate for src_id",
++					__func__);
++		return -ENOMEM;
++	}
++	memcpy(node_rule->rule_ops.src_id, src->src_id,
++				sizeof(int) * src->num_src);
++
++
++	if (!nb) {
++		node_rule->rule_ops.dst_node = kzalloc(
++			(sizeof(int) * node_rule->rule_ops.num_dst),
++						GFP_KERNEL);
++		if (!node_rule->rule_ops.dst_node) {
++			pr_err("%s:Failed to allocate for src_id",
++							__func__);
++			return -ENOMEM;
++		}
++		memcpy(node_rule->rule_ops.dst_node, src->dst_node,
++						sizeof(int) * src->num_dst);
++	}
++
++	node_rule->num_src = src->num_src;
++	node_rule->src_info = kzalloc(
++		(sizeof(struct node_vote_info) * node_rule->rule_ops.num_src),
++							GFP_KERNEL);
++	if (!node_rule->src_info) {
++		pr_err("%s:Failed to allocate for src_id",
++						__func__);
++		return -ENOMEM;
++	}
++	for (i = 0; i < src->num_src; i++)
++		node_rule->src_info[i].id = src->src_id[i];
++
++	return ret;
++}
++
++void msm_rule_register(int num_rules, struct bus_rule_type *rule,
++					struct notifier_block *nb)
++{
++	struct rule_node_info *node = NULL;
++	int i, j;
++	struct rules_def *node_rule = NULL;
++	int num_dst = 0;
++
++	if (!rule)
++		return;
++
++	mutex_lock(&msm_bus_rules_lock);
++	for (i = 0; i < num_rules; i++) {
++		if (nb)
++			num_dst = 1;
++		else
++			num_dst = rule[i].num_dst;
++
++		for (j = 0; j < num_dst; j++) {
++			int id = 0;
++
++			if (nb)
++				id = NB_ID;
++			else
++				id = rule[i].dst_node[j];
++
++			node = gen_node(id, nb);
++			if (!node) {
++				pr_info("Error getting rule");
++				goto exit_rule_register;
++			}
++			node_rule = kzalloc(sizeof(struct rules_def),
++						GFP_KERNEL);
++			if (!node_rule) {
++				pr_err("%s: Failed to allocate for rule",
++								__func__);
++				goto exit_rule_register;
++			}
++
++			if (copy_rule(&rule[i], node_rule, nb)) {
++				pr_err("Error copying rule");
++				goto exit_rule_register;
++			}
++
++			node_rule->rule_id = node->num_rules++;
++			if (nb)
++				node->data = nb;
++
++			list_add_tail(&node_rule->link, &node->node_rules);
++		}
++	}
++	list_sort(NULL, &node->node_rules, node_rules_compare);
++
++	if (nb)
++		raw_notifier_chain_register(&node->rule_notify_list, nb);
++exit_rule_register:
++	mutex_unlock(&msm_bus_rules_lock);
++	return;
++}
++
++static int comp_rules(struct bus_rule_type *rulea, struct bus_rule_type *ruleb)
++{
++	int ret = 1;
++
++	if (rulea->num_src == ruleb->num_src)
++		ret = memcmp(rulea->src_id, ruleb->src_id,
++				(sizeof(int) * rulea->num_src));
++	if (!ret && (rulea->num_dst == ruleb->num_dst))
++		ret = memcmp(rulea->dst_node, ruleb->dst_node,
++				(sizeof(int) * rulea->num_dst));
++	if (!ret && (rulea->dst_bw == ruleb->dst_bw) &&
++		(rulea->op == ruleb->op) && (rulea->thresh == ruleb->thresh))
++		ret = 0;
++
++	return ret;
++}
++
++void msm_rule_unregister(int num_rules, struct bus_rule_type *rule,
++					struct notifier_block *nb)
++{
++	int i;
++	struct rule_node_info *node = NULL;
++	struct rule_node_info *node_tmp = NULL;
++	struct rules_def *node_rule;
++	struct rules_def *node_rule_tmp;
++	bool match_found = false;
++
++	if (!rule)
++		return;
++
++	mutex_lock(&msm_bus_rules_lock);
++	if (nb) {
++		node = get_node(NB_ID, nb);
++		if (!node) {
++			pr_err("%s: Can't find node", __func__);
++			goto exit_unregister_rule;
++		}
++
++		list_for_each_entry_safe(node_rule, node_rule_tmp,
++					&node->node_rules, link) {
++			list_del(&node_rule->link);
++			kfree(node_rule);
++			node->num_rules--;
++		}
++		raw_notifier_chain_unregister(&node->rule_notify_list, nb);
++	} else {
++		for (i = 0; i < num_rules; i++) {
++			match_found = false;
++
++			list_for_each_entry(node, &node_list, link) {
++				list_for_each_entry_safe(node_rule,
++				node_rule_tmp, &node->node_rules, link) {
++					if (comp_rules(&node_rule->rule_ops,
++						&rule[i]) == 0) {
++						list_del(&node_rule->link);
++						kfree(node_rule);
++						match_found = true;
++						node->num_rules--;
++						list_sort(NULL,
++							&node->node_rules,
++							node_rules_compare);
++						break;
++					}
++				}
++			}
++		}
++	}
++
++	list_for_each_entry_safe(node, node_tmp,
++					&node_list, link) {
++		if (!node->num_rules) {
++			pr_debug("Deleting Rule node %d", node->id);
++			list_del(&node->link);
++			kfree(node);
++		}
++	}
++exit_unregister_rule:
++	mutex_unlock(&msm_bus_rules_lock);
++}
++
++bool msm_rule_are_rules_registered(void)
++{
++	bool ret = false;
++
++	if (list_empty(&node_list))
++		ret = false;
++	else
++		ret = true;
++
++	return ret;
++}
++
+--- /dev/null
++++ b/drivers/bus/msm_bus/msm_bus_rules.h
+@@ -0,0 +1,77 @@
++/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++
++#ifndef _ARCH_ARM_MACH_MSM_BUS_RULES_H
++#define _ARCH_ARM_MACH_MSM_BUS_RULES_H
++
++#include <linux/types.h>
++#include <linux/list.h>
++#include <linux/notifier.h>
++#include <dt-bindings/msm/msm-bus-rule-ops.h>
++
++#define MAX_NODES		(5)
++
++struct rule_update_path_info {
++	u32 id;
++	u64 ab;
++	u64 ib;
++	u64 clk;
++	struct list_head link;
++};
++
++struct rule_apply_rcm_info {
++	u32 id;
++	u64 lim_bw;
++	int throttle;
++	bool after_clk_commit;
++	struct list_head link;
++};
++
++struct bus_rule_type {
++	int num_src;
++	int *src_id;
++	int src_field;
++	int op;
++	u64 thresh;
++	int num_dst;
++	int *dst_node;
++	u64 dst_bw;
++	int mode;
++	void *client_data;
++};
++
++#if (defined(CONFIG_BUS_TOPOLOGY_ADHOC))
++void msm_rule_register(int num_rules, struct bus_rule_type *rule,
++				struct notifier_block *nb);
++void msm_rule_unregister(int num_rules, struct bus_rule_type *rule,
++						struct notifier_block *nb);
++void print_rules_buf(char *buf, int count);
++bool msm_rule_are_rules_registered(void);
++#else
++static inline void msm_rule_register(int num_rules, struct bus_rule_type *rule,
++				struct notifier_block *nb)
++{
++}
++static inline void msm_rule_unregister(int num_rules,
++					struct bus_rule_type *rule,
++					struct notifier_block *nb)
++{
++}
++static inline void print_rules_buf(char *buf, int count)
++{
++}
++static inline bool msm_rule_are_rules_registered(void)
++{
++	return false;
++}
++#endif /* defined(CONFIG_BUS_TOPOLOGY_ADHOC) */
++#endif /* _ARCH_ARM_MACH_MSM_BUS_RULES_H */
+--- /dev/null
++++ b/drivers/bus/msm_bus/msm_buspm_coresight_adhoc.c
+@@ -0,0 +1,189 @@
++/* Copyright (c) 2014 The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/clk.h>
++#include <linux/module.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/err.h>
++#include <linux/slab.h>
++#include <linux/errno.h>
++#include <linux/uaccess.h>
++#include <linux/miscdevice.h>
++#include <linux/of_coresight.h>
++#include <linux/coresight.h>
++#include <linux/io.h>
++#include <linux/of.h>
++#include <linux/list.h>
++
++struct msmbus_coresight_adhoc_clock_drvdata {
++	int				 id;
++	struct clk			*clk;
++	struct list_head		 list;
++};
++
++struct msmbus_coresight_adhoc_drvdata {
++	struct device			*dev;
++	struct coresight_device		*csdev;
++	struct coresight_desc		*desc;
++	struct list_head		 clocks;
++};
++
++static int msmbus_coresight_enable_adhoc(struct coresight_device *csdev)
++{
++	struct msmbus_coresight_adhoc_clock_drvdata *clk;
++	struct msmbus_coresight_adhoc_drvdata *drvdata =
++		dev_get_drvdata(csdev->dev.parent);
++	long rate;
++
++	list_for_each_entry(clk, &drvdata->clocks, list) {
++		if (clk->id == csdev->id) {
++			rate = clk_round_rate(clk->clk, 1L);
++			clk_set_rate(clk->clk, rate);
++			return clk_prepare_enable(clk->clk);
++		}
++	}
++
++	return -ENOENT;
++}
++
++static void msmbus_coresight_disable_adhoc(struct coresight_device *csdev)
++{
++	struct msmbus_coresight_adhoc_clock_drvdata *clk;
++	struct msmbus_coresight_adhoc_drvdata *drvdata =
++		dev_get_drvdata(csdev->dev.parent);
++
++	list_for_each_entry(clk, &drvdata->clocks, list) {
++		if (clk->id == csdev->id)
++			clk_disable_unprepare(clk->clk);
++	}
++}
++
++static const struct coresight_ops_source msmbus_coresight_adhoc_source_ops = {
++	.enable		= msmbus_coresight_enable_adhoc,
++	.disable	= msmbus_coresight_disable_adhoc,
++};
++
++static const struct coresight_ops msmbus_coresight_cs_ops = {
++	.source_ops	= &msmbus_coresight_adhoc_source_ops,
++};
++
++void msmbus_coresight_remove_adhoc(struct platform_device *pdev)
++{
++	struct msmbus_coresight_adhoc_clock_drvdata *clk, *next_clk;
++	struct msmbus_coresight_adhoc_drvdata *drvdata =
++		platform_get_drvdata(pdev);
++
++	msmbus_coresight_disable_adhoc(drvdata->csdev);
++	coresight_unregister(drvdata->csdev);
++	list_for_each_entry_safe(clk, next_clk, &drvdata->clocks, list) {
++		list_del(&clk->list);
++		devm_kfree(&pdev->dev, clk);
++	}
++	devm_kfree(&pdev->dev, drvdata->desc);
++	devm_kfree(&pdev->dev, drvdata);
++	platform_set_drvdata(pdev, NULL);
++}
++EXPORT_SYMBOL(msmbus_coresight_remove_adhoc);
++
++static int buspm_of_get_clk_adhoc(struct device_node *of_node,
++	struct msmbus_coresight_adhoc_drvdata *drvdata, int id)
++{
++	struct msmbus_coresight_adhoc_clock_drvdata *clk;
++	clk = devm_kzalloc(drvdata->dev, sizeof(*clk), GFP_KERNEL);
++
++	if (!clk)
++		return -ENOMEM;
++
++	clk->id = id;
++
++	clk->clk = of_clk_get_by_name(of_node, "bus_clk");
++	if (IS_ERR(clk->clk)) {
++		pr_err("Error: unable to get clock for coresight node %d\n",
++			id);
++		goto err;
++	}
++
++	list_add(&clk->list, &drvdata->clocks);
++	return 0;
++
++err:
++	devm_kfree(drvdata->dev, clk);
++	return -EINVAL;
++}
++
++int msmbus_coresight_init_adhoc(struct platform_device *pdev,
++		struct device_node *of_node)
++{
++	int ret;
++	struct device *dev = &pdev->dev;
++	struct coresight_platform_data *pdata;
++	struct msmbus_coresight_adhoc_drvdata *drvdata;
++	struct coresight_desc *desc;
++
++	pdata = of_get_coresight_platform_data(dev, of_node);
++	if (IS_ERR(pdata))
++		return PTR_ERR(pdata);
++
++	drvdata = platform_get_drvdata(pdev);
++	if (IS_ERR_OR_NULL(drvdata)) {
++		drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
++		if (!drvdata) {
++			pr_err("coresight: Alloc for drvdata failed\n");
++			return -ENOMEM;
++		}
++		INIT_LIST_HEAD(&drvdata->clocks);
++		drvdata->dev = &pdev->dev;
++		platform_set_drvdata(pdev, drvdata);
++	}
++	ret = buspm_of_get_clk_adhoc(of_node, drvdata, pdata->id);
++	if (ret) {
++		pr_err("Error getting clocks\n");
++		ret = -ENXIO;
++		goto err1;
++	}
++
++	desc = devm_kzalloc(dev, sizeof(*desc), GFP_KERNEL);
++	if (!desc) {
++		pr_err("coresight: Error allocating memory\n");
++		ret = -ENOMEM;
++		goto err1;
++	}
++
++	desc->type = CORESIGHT_DEV_TYPE_SOURCE;
++	desc->subtype.source_subtype = CORESIGHT_DEV_SUBTYPE_SOURCE_BUS;
++	desc->ops = &msmbus_coresight_cs_ops;
++	desc->pdata = pdata;
++	desc->dev = &pdev->dev;
++	desc->owner = THIS_MODULE;
++	drvdata->desc = desc;
++	drvdata->csdev = coresight_register(desc);
++	if (IS_ERR(drvdata->csdev)) {
++		pr_err("coresight: Coresight register failed\n");
++		ret = PTR_ERR(drvdata->csdev);
++		goto err0;
++	}
++
++	dev_info(dev, "msmbus_coresight initialized\n");
++
++	return 0;
++err0:
++	devm_kfree(dev, desc);
++err1:
++	devm_kfree(dev, drvdata);
++	platform_set_drvdata(pdev, NULL);
++	return ret;
++}
++EXPORT_SYMBOL(msmbus_coresight_init_adhoc);
++
++MODULE_LICENSE("GPL v2");
++MODULE_DESCRIPTION("MSM BusPM Adhoc CoreSight Driver");
+--- /dev/null
++++ b/drivers/bus/msm_bus/rpm-smd.h
+@@ -0,0 +1,268 @@
++/* Copyright (c) 2012, 2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ */
++
++#ifndef __ARCH_ARM_MACH_MSM_RPM_SMD_H
++#define __ARCH_ARM_MACH_MSM_RPM_SMD_H
++
++/**
++ * enum msm_rpm_set - RPM enumerations for sleep/active set
++ * %MSM_RPM_CTX_SET_0: Set resource parameters for active mode.
++ * %MSM_RPM_CTX_SET_SLEEP: Set resource parameters for sleep.
++ */
++enum msm_rpm_set {
++	MSM_RPM_CTX_ACTIVE_SET,
++	MSM_RPM_CTX_SLEEP_SET,
++};
++
++struct msm_rpm_request;
++
++struct msm_rpm_kvp {
++	uint32_t key;
++	uint32_t length;
++	uint8_t *data;
++};
++#ifdef CONFIG_MSM_RPM_SMD
++/**
++ * msm_rpm_request() - Creates a parent element to identify the
++ * resource on the RPM, that stores the KVPs for different fields modified
++ * for a hardware resource
++ *
++ * @set: if the device is setting the active/sleep set parameter
++ * for the resource
++ * @rsc_type: unsigned 32 bit integer that identifies the type of the resource
++ * @rsc_id: unsigned 32 bit that uniquely identifies a resource within a type
++ * @num_elements: number of KVPs pairs associated with the resource
++ *
++ * returns pointer to a msm_rpm_request on success, NULL on error
++ */
++struct msm_rpm_request *msm_rpm_create_request(
++		enum msm_rpm_set set, uint32_t rsc_type,
++		uint32_t rsc_id, int num_elements);
++
++/**
++ * msm_rpm_request_noirq() - Creates a parent element to identify the
++ * resource on the RPM, that stores the KVPs for different fields modified
++ * for a hardware resource. This function is similar to msm_rpm_create_request
++ * except that it has to be called with interrupts masked.
++ *
++ * @set: if the device is setting the active/sleep set parameter
++ * for the resource
++ * @rsc_type: unsigned 32 bit integer that identifies the type of the resource
++ * @rsc_id: unsigned 32 bit that uniquely identifies a resource within a type
++ * @num_elements: number of KVPs pairs associated with the resource
++ *
++ * returns pointer to a msm_rpm_request on success, NULL on error
++ */
++struct msm_rpm_request *msm_rpm_create_request_noirq(
++		enum msm_rpm_set set, uint32_t rsc_type,
++		uint32_t rsc_id, int num_elements);
++
++/**
++ * msm_rpm_add_kvp_data() - Adds a Key value pair to a existing RPM resource.
++ *
++ * @handle: RPM resource handle to which the data should be appended
++ * @key:  unsigned integer identify the parameter modified
++ * @data: byte array that contains the value corresponding to key.
++ * @size:   size of data in bytes.
++ *
++ * returns 0 on success or errno
++ */
++int msm_rpm_add_kvp_data(struct msm_rpm_request *handle,
++		uint32_t key, const uint8_t *data, int size);
++
++/**
++ * msm_rpm_add_kvp_data_noirq() - Adds a Key value pair to a existing RPM
++ * resource. This function is similar to msm_rpm_add_kvp_data except that it
++ * has to be called with interrupts masked.
++ *
++ * @handle: RPM resource handle to which the data should be appended
++ * @key:  unsigned integer identify the parameter modified
++ * @data: byte array that contains the value corresponding to key.
++ * @size:   size of data in bytes.
++ *
++ * returns 0 on success or errno
++ */
++int msm_rpm_add_kvp_data_noirq(struct msm_rpm_request *handle,
++		uint32_t key, const uint8_t *data, int size);
++
++/** msm_rpm_free_request() - clean up the RPM request handle created with
++ * msm_rpm_create_request
++ *
++ * @handle: RPM resource handle to be cleared.
++ */
++
++void msm_rpm_free_request(struct msm_rpm_request *handle);
++
++/**
++ * msm_rpm_send_request() - Send the RPM messages using SMD. The function
++ * assigns a message id before sending the data out to the RPM. RPM hardware
++ * uses the message id to acknowledge the messages.
++ *
++ * @handle: pointer to the msm_rpm_request for the resource being modified.
++ *
++ * returns non-zero message id on success and zero on a failed transaction.
++ * The drivers use message id to wait for ACK from RPM.
++ */
++int msm_rpm_send_request(struct msm_rpm_request *handle);
++
++/**
++ * msm_rpm_send_request_noirq() - Send the RPM messages using SMD. The
++ * function assigns a message id before sending the data out to the RPM.
++ * RPM hardware uses the message id to acknowledge the messages. This function
++ * is similar to msm_rpm_send_request except that it has to be called with
++ * interrupts masked.
++ *
++ * @handle: pointer to the msm_rpm_request for the resource being modified.
++ *
++ * returns non-zero message id on success and zero on a failed transaction.
++ * The drivers use message id to wait for ACK from RPM.
++ */
++int msm_rpm_send_request_noirq(struct msm_rpm_request *handle);
++
++/**
++ * msm_rpm_wait_for_ack() - A blocking call that waits for acknowledgment of
++ * a message from RPM.
++ *
++ * @msg_id: the return from msm_rpm_send_requests
++ *
++ * returns 0 on success or errno
++ */
++int msm_rpm_wait_for_ack(uint32_t msg_id);
++
++/**
++ * msm_rpm_wait_for_ack_noirq() - A blocking call that waits for acknowledgment
++ * of a message from RPM. This function is similar to msm_rpm_wait_for_ack
++ * except that it has to be called with interrupts masked.
++ *
++ * @msg_id: the return from msm_rpm_send_request
++ *
++ * returns 0 on success or errno
++ */
++int msm_rpm_wait_for_ack_noirq(uint32_t msg_id);
++
++/**
++ * msm_rpm_send_message() -Wrapper function for clients to send data given an
++ * array of key value pairs.
++ *
++ * @set: if the device is setting the active/sleep set parameter
++ * for the resource
++ * @rsc_type: unsigned 32 bit integer that identifies the type of the resource
++ * @rsc_id: unsigned 32 bit that uniquely identifies a resource within a type
++ * @kvp: array of KVP data.
++ * @nelem: number of KVPs pairs associated with the message.
++ *
++ * returns  0 on success and errno on failure.
++ */
++int msm_rpm_send_message(enum msm_rpm_set set, uint32_t rsc_type,
++		uint32_t rsc_id, struct msm_rpm_kvp *kvp, int nelems);
++
++/**
++ * msm_rpm_send_message_noirq() -Wrapper function for clients to send data
++ * given an array of key value pairs. This function is similar to the
++ * msm_rpm_send_message() except that it has to be called with interrupts
++ * disabled. Clients should choose the irq version when possible for system
++ * performance.
++ *
++ * @set: if the device is setting the active/sleep set parameter
++ * for the resource
++ * @rsc_type: unsigned 32 bit integer that identifies the type of the resource
++ * @rsc_id: unsigned 32 bit that uniquely identifies a resource within a type
++ * @kvp: array of KVP data.
++ * @nelem: number of KVPs pairs associated with the message.
++ *
++ * returns  0 on success and errno on failure.
++ */
++int msm_rpm_send_message_noirq(enum msm_rpm_set set, uint32_t rsc_type,
++		uint32_t rsc_id, struct msm_rpm_kvp *kvp, int nelems);
++
++/**
++ * msm_rpm_driver_init() - Initialization function that registers for a
++ * rpm platform driver.
++ *
++ * returns 0 on success.
++ */
++int __init msm_rpm_driver_init(void);
++
++#else
++
++static inline struct msm_rpm_request *msm_rpm_create_request(
++		enum msm_rpm_set set, uint32_t rsc_type,
++		uint32_t rsc_id, int num_elements)
++{
++	return NULL;
++}
++
++static inline struct msm_rpm_request *msm_rpm_create_request_noirq(
++		enum msm_rpm_set set, uint32_t rsc_type,
++		uint32_t rsc_id, int num_elements)
++{
++	return NULL;
++
++}
++static inline uint32_t msm_rpm_add_kvp_data(struct msm_rpm_request *handle,
++		uint32_t key, const uint8_t *data, int count)
++{
++	return 0;
++}
++static inline uint32_t msm_rpm_add_kvp_data_noirq(
++		struct msm_rpm_request *handle, uint32_t key,
++		const uint8_t *data, int count)
++{
++	return 0;
++}
++
++static inline void msm_rpm_free_request(struct msm_rpm_request *handle)
++{
++	return;
++}
++
++static inline int msm_rpm_send_request(struct msm_rpm_request *handle)
++{
++	return 0;
++}
++
++static inline int msm_rpm_send_request_noirq(struct msm_rpm_request *handle)
++{
++	return 0;
++
++}
++
++static inline int msm_rpm_send_message(enum msm_rpm_set set, uint32_t rsc_type,
++		uint32_t rsc_id, struct msm_rpm_kvp *kvp, int nelems)
++{
++	return 0;
++}
++
++static inline int msm_rpm_send_message_noirq(enum msm_rpm_set set,
++		uint32_t rsc_type, uint32_t rsc_id, struct msm_rpm_kvp *kvp,
++		int nelems)
++{
++	return 0;
++}
++
++static inline int msm_rpm_wait_for_ack(uint32_t msg_id)
++{
++	return 0;
++
++}
++static inline int msm_rpm_wait_for_ack_noirq(uint32_t msg_id)
++{
++	return 0;
++}
++
++static inline int __init msm_rpm_driver_init(void)
++{
++	return 0;
++}
++#endif
++#endif /*__ARCH_ARM_MACH_MSM_RPM_SMD_H*/
+--- /dev/null
++++ b/include/trace/events/trace_msm_bus.h
+@@ -0,0 +1,163 @@
++/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++
++#undef TRACE_SYSTEM
++#define TRACE_SYSTEM msm_bus
++
++#if !defined(_TRACE_MSM_BUS_H) || defined(TRACE_HEADER_MULTI_READ)
++#define _TRACE_MSM_BUS_H
++
++#include <linux/tracepoint.h>
++
++TRACE_EVENT(bus_update_request,
++
++	TP_PROTO(int sec, int nsec, const char *name, unsigned int index,
++		int src, int dest, unsigned long long ab,
++		unsigned long long ib),
++
++	TP_ARGS(sec, nsec, name, index, src, dest, ab, ib),
++
++	TP_STRUCT__entry(
++		__field(int, sec)
++		__field(int, nsec)
++		__string(name, name)
++		__field(u32, index)
++		__field(int, src)
++		__field(int, dest)
++		__field(u64, ab)
++		__field(u64, ib)
++	),
++
++	TP_fast_assign(
++		__entry->sec = sec;
++		__entry->nsec = nsec;
++		__assign_str(name, name);
++		__entry->index = index;
++		__entry->src = src;
++		__entry->dest = dest;
++		__entry->ab = ab;
++		__entry->ib = ib;
++	),
++
++	TP_printk("time= %d.%d name=%s index=%u src=%d dest=%d ab=%llu ib=%llu",
++		__entry->sec,
++		__entry->nsec,
++		__get_str(name),
++		(unsigned int)__entry->index,
++		__entry->src,
++		__entry->dest,
++		(unsigned long long)__entry->ab,
++		(unsigned long long)__entry->ib)
++);
++
++TRACE_EVENT(bus_bimc_config_limiter,
++
++	TP_PROTO(int mas_id, unsigned long long cur_lim_bw),
++
++	TP_ARGS(mas_id, cur_lim_bw),
++
++	TP_STRUCT__entry(
++		__field(int, mas_id)
++		__field(u64, cur_lim_bw)
++	),
++
++	TP_fast_assign(
++		__entry->mas_id = mas_id;
++		__entry->cur_lim_bw = cur_lim_bw;
++	),
++
++	TP_printk("Master=%d cur_lim_bw=%llu",
++		__entry->mas_id,
++		(unsigned long long)__entry->cur_lim_bw)
++);
++
++TRACE_EVENT(bus_avail_bw,
++
++	TP_PROTO(unsigned long long cur_bimc_bw, unsigned long long cur_mdp_bw),
++
++	TP_ARGS(cur_bimc_bw, cur_mdp_bw),
++
++	TP_STRUCT__entry(
++		__field(u64, cur_bimc_bw)
++		__field(u64, cur_mdp_bw)
++	),
++
++	TP_fast_assign(
++		__entry->cur_bimc_bw = cur_bimc_bw;
++		__entry->cur_mdp_bw = cur_mdp_bw;
++	),
++
++	TP_printk("cur_bimc_bw = %llu cur_mdp_bw = %llu",
++		(unsigned long long)__entry->cur_bimc_bw,
++		(unsigned long long)__entry->cur_mdp_bw)
++);
++
++TRACE_EVENT(bus_rules_matches,
++
++	TP_PROTO(int node_id, int rule_id, unsigned long long node_ab,
++		unsigned long long node_ib, unsigned long long node_clk),
++
++	TP_ARGS(node_id, rule_id, node_ab, node_ib, node_clk),
++
++	TP_STRUCT__entry(
++		__field(int, node_id)
++		__field(int, rule_id)
++		__field(u64, node_ab)
++		__field(u64, node_ib)
++		__field(u64, node_clk)
++	),
++
++	TP_fast_assign(
++		__entry->node_id = node_id;
++		__entry->rule_id = rule_id;
++		__entry->node_ab = node_ab;
++		__entry->node_ib = node_ib;
++		__entry->node_clk = node_clk;
++	),
++
++	TP_printk("Rule match node%d rule%d node-ab%llu:ib%llu:clk%llu",
++		__entry->node_id, __entry->rule_id,
++		(unsigned long long)__entry->node_ab,
++		(unsigned long long)__entry->node_ib,
++		(unsigned long long)__entry->node_clk)
++);
++
++TRACE_EVENT(bus_bke_params,
++
++	TP_PROTO(u32 gc, u32 gp, u32 thl, u32 thm, u32 thh),
++
++	TP_ARGS(gc, gp, thl, thm, thh),
++
++	TP_STRUCT__entry(
++		__field(u32, gc)
++		__field(u32, gp)
++		__field(u32, thl)
++		__field(u32, thm)
++		__field(u32, thh)
++	),
++
++	TP_fast_assign(
++		__entry->gc = gc;
++		__entry->gp = gp;
++		__entry->thl = thl;
++		__entry->thm = thm;
++		__entry->thh = thh;
++	),
++
++	TP_printk("BKE Params GC=0x%x GP=0x%x THL=0x%x THM=0x%x THH=0x%x",
++		__entry->gc, __entry->gp, __entry->thl, __entry->thm,
++			__entry->thh)
++);
++
++#endif
++#define TRACE_INCLUDE_FILE trace_msm_bus
++#include <trace/define_trace.h>
diff --git a/target/linux/ipq806x/patches-4.14/850-soc-add-qualcomm-syscon.patch b/target/linux/ipq806x/patches-4.14/850-soc-add-qualcomm-syscon.patch
new file mode 100644
index 0000000..55a6c0d
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/850-soc-add-qualcomm-syscon.patch
@@ -0,0 +1,177 @@
+From: Christian Lamparter <chunkeey@googlemail.com>
+Subject: SoC: add qualcomm syscon
+--- a/drivers/soc/qcom/Makefile
++++ b/drivers/soc/qcom/Makefile
+@@ -9,3 +9,4 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_st
+ obj-$(CONFIG_QCOM_SMP2P)	+= smp2p.o
+ obj-$(CONFIG_QCOM_SMSM)	+= smsm.o
+ obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
++obj-$(CONFIG_QCOM_TCSR)	 += qcom_tcsr.o
+--- a/drivers/soc/qcom/Kconfig
++++ b/drivers/soc/qcom/Kconfig
+@@ -78,6 +78,13 @@ config QCOM_SMSM
+ 	  Say yes here to support the Qualcomm Shared Memory State Machine.
+ 	  The state machine is represented by bits in shared memory.
+ 
++config QCOM_TCSR
++	tristate "QCOM Top Control and Status Registers"
++	depends on ARCH_QCOM
++	help
++	  Say y here to enable TCSR support.  The TCSR provides control
++	  functions for various peripherals.
++
+ config QCOM_WCNSS_CTRL
+ 	tristate "Qualcomm WCNSS control driver"
+	depends on ARCH_QCOM
+--- /dev/null
++++ b/drivers/soc/qcom/qcom_tcsr.c
+@@ -0,0 +1,98 @@
++/*
++ * Copyright (c) 2014, The Linux foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License rev 2 and
++ * only rev 2 as published by the free Software foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or fITNESS fOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/io.h>
++#include <linux/module.h>
++#include <linux/of.h>
++#include <linux/of_platform.h>
++#include <linux/platform_device.h>
++
++#define TCSR_USB_PORT_SEL	0xb0
++#define TCSR_USB_HSPHY_CONFIG	0xC
++
++#define TCSR_ESS_INTERFACE_SEL_OFFSET   0x0
++#define TCSR_ESS_INTERFACE_SEL_MASK     0xf
++
++#define TCSR_WIFI0_GLB_CFG_OFFSET	0x0
++#define TCSR_WIFI1_GLB_CFG_OFFSET	0x4
++#define TCSR_PNOC_SNOC_MEMTYPE_M0_M2	0x4
++
++static int tcsr_probe(struct platform_device *pdev)
++{
++	struct resource *res;
++	const struct device_node *node = pdev->dev.of_node;
++	void __iomem *base;
++	u32 val;
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	base = devm_ioremap_resource(&pdev->dev, res);
++	if (IS_ERR(base))
++		return PTR_ERR(base);
++
++	if (!of_property_read_u32(node, "qcom,usb-ctrl-select", &val)) {
++		dev_err(&pdev->dev, "setting usb port select = %d\n", val);
++		writel(val, base + TCSR_USB_PORT_SEL);
++	}
++
++	if (!of_property_read_u32(node, "qcom,usb-hsphy-mode-select", &val)) {
++		dev_info(&pdev->dev, "setting usb hs phy mode select = %x\n", val);
++		writel(val, base + TCSR_USB_HSPHY_CONFIG);
++	}
++
++	if (!of_property_read_u32(node, "qcom,ess-interface-select", &val)) {
++		u32 tmp = 0;
++		dev_info(&pdev->dev, "setting ess interface select = %x\n", val);
++		tmp = readl(base + TCSR_ESS_INTERFACE_SEL_OFFSET);
++		tmp = tmp & (~TCSR_ESS_INTERFACE_SEL_MASK);
++		tmp = tmp | (val&TCSR_ESS_INTERFACE_SEL_MASK);
++		writel(tmp, base + TCSR_ESS_INTERFACE_SEL_OFFSET);
++        }
++
++	if (!of_property_read_u32(node, "qcom,wifi_glb_cfg", &val)) {
++		dev_info(&pdev->dev, "setting wifi_glb_cfg = %x\n", val);
++		writel(val, base + TCSR_WIFI0_GLB_CFG_OFFSET);
++		writel(val, base + TCSR_WIFI1_GLB_CFG_OFFSET);
++	}
++
++	if (!of_property_read_u32(node, "qcom,wifi_noc_memtype_m0_m2", &val)) {
++		dev_info(&pdev->dev,
++			"setting wifi_noc_memtype_m0_m2 = %x\n", val);
++		writel(val, base + TCSR_PNOC_SNOC_MEMTYPE_M0_M2);
++	}
++
++	return 0;
++}
++
++static const struct of_device_id tcsr_dt_match[] = {
++	{ .compatible = "qcom,tcsr", },
++	{ },
++};
++
++MODULE_DEVICE_TABLE(of, tcsr_dt_match);
++
++static struct platform_driver tcsr_driver = {
++	.driver = {
++		.name		= "tcsr",
++		.owner		= THIS_MODULE,
++		.of_match_table	= tcsr_dt_match,
++	},
++	.probe = tcsr_probe,
++};
++
++module_platform_driver(tcsr_driver);
++
++MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
++MODULE_DESCRIPTION("QCOM TCSR driver");
++MODULE_LICENSE("GPL v2");
+--- /dev/null
++++ b/include/dt-bindings/soc/qcom,tcsr.h
+@@ -0,0 +1,48 @@
++/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++#ifndef __DT_BINDINGS_QCOM_TCSR_H
++#define __DT_BINDINGS_QCOM_TCSR_H
++
++#define TCSR_USB_SELECT_USB3_P0		0x1
++#define TCSR_USB_SELECT_USB3_P1		0x2
++#define TCSR_USB_SELECT_USB3_DUAL	0x3
++
++/* IPQ40xx HS PHY Mode Select */
++#define TCSR_USB_HSPHY_HOST_MODE	0x00E700E7
++#define TCSR_USB_HSPHY_DEVICE_MODE	0x00C700E7
++
++/* IPQ40xx ess interface mode select */
++#define TCSR_ESS_PSGMII              0
++#define TCSR_ESS_PSGMII_RGMII5       1
++#define TCSR_ESS_PSGMII_RMII0        2
++#define TCSR_ESS_PSGMII_RMII1        4
++#define TCSR_ESS_PSGMII_RMII0_RMII1  6
++#define TCSR_ESS_PSGMII_RGMII4       9
++
++/*
++ * IPQ40xx WiFi Global Config
++ * Bit 30:AXID_EN
++ * Enable AXI master bus Axid translating to confirm all txn submitted by order
++ * Bit 24: Use locally generated socslv_wxi_bvalid
++ * 1:  use locally generate socslv_wxi_bvalid for performance.
++ * 0:  use SNOC socslv_wxi_bvalid.
++ */
++#define TCSR_WIFI_GLB_CFG		0x41000000
++
++/* IPQ40xx MEM_TYPE_SEL_M0_M2 Select Bit 26:24 - 2 NORMAL */
++#define TCSR_WIFI_NOC_MEMTYPE_M0_M2	0x02222222
++
++/* TCSR A/B REG */
++#define IPQ806X_TCSR_REG_A_ADM_CRCI_MUX_SEL     0
++#define IPQ806X_TCSR_REG_B_ADM_CRCI_MUX_SEL     1
++
++#endif
