| Message ID | 1325754412-29963-2-git-send-email-yu.liu@freescale.com |
|---|---|
| State | New, archived |
| Headers | show |
On 05.01.2012, at 10:06, Liu Yu wrote: > If the guest hypervisor node contains "has-idle" property. > > Signed-off-by: Liu Yu <yu.liu@freescale.com> > --- > v2: > 1. move the idle code into assembly. > 2. move the part that check "has-idle" into epapr code. > > arch/powerpc/include/asm/epapr_hcalls.h | 1 + > arch/powerpc/include/asm/machdep.h | 5 +++++ > arch/powerpc/kernel/epapr_para.c | 4 ++++ > arch/powerpc/kernel/idle_e500.S | 17 +++++++++++++++++ > arch/powerpc/kernel/kvm.c | 24 ++++++++++++++++++++++++ > 5 files changed, 51 insertions(+), 0 deletions(-) > > diff --git a/arch/powerpc/include/asm/epapr_hcalls.h b/arch/powerpc/include/asm/epapr_hcalls.h > index c4b86e4..566805e 100644 > --- a/arch/powerpc/include/asm/epapr_hcalls.h > +++ b/arch/powerpc/include/asm/epapr_hcalls.h > @@ -150,6 +150,7 @@ > > extern u32 *epapr_hcall_insts; > extern int epapr_hcall_insts_len; > +extern bool epapr_hcall_has_idle; > > static inline void epapr_get_hcall_insts(u32 **instp, int *lenp) > { > diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h > index 47cacdd..7e56abf 100644 > --- a/arch/powerpc/include/asm/machdep.h > +++ b/arch/powerpc/include/asm/machdep.h > @@ -255,6 +255,11 @@ extern void power4_idle(void); > extern void power7_idle(void); > extern void ppc6xx_idle(void); > extern void book3e_idle(void); > +#ifdef CONFIG_KVM_GUEST > +extern void e500_ev_idle(unsigned long *, unsigned long *, unsigned long, > + unsigned long (*)(unsigned long *, unsigned long *, > + unsigned long)); > +#endif > > /* > * ppc_md contains a copy of the machine description structure for the > diff --git a/arch/powerpc/kernel/epapr_para.c b/arch/powerpc/kernel/epapr_para.c > index 714dcb3..1f37ddf 100644 > --- a/arch/powerpc/kernel/epapr_para.c > +++ b/arch/powerpc/kernel/epapr_para.c > @@ -22,6 +22,7 @@ > > u32 *epapr_hcall_insts; > int epapr_hcall_insts_len; > +bool epapr_hcall_has_idle; > > static int __init epapr_para_init(void) > { > @@ -39,6 +40,9 @@ static int __init epapr_para_init(void) > epapr_hcall_insts_len = len; > } > > + if (of_get_property(hyper_node, "has-idle", NULL)) > + epapr_hcall_has_idle = true; > + > return 0; > } > > diff --git a/arch/powerpc/kernel/idle_e500.S b/arch/powerpc/kernel/idle_e500.S > index 3e2b95c..6ea95f0 100644 > --- a/arch/powerpc/kernel/idle_e500.S > +++ b/arch/powerpc/kernel/idle_e500.S > @@ -85,6 +85,23 @@ END_FTR_SECTION_IFSET(CPU_FTR_L2CSR|CPU_FTR_CAN_NAP) > 2: b 2b > #endif /* !E500MC */ > > +#ifdef CONFIG_KVM_GUEST > +/* > + * r3 contains the pointer to in[8] > + * r4 contains the pointer to out[8] > + * r5 contains the hcall vendor and nr > + * r6 contains the handler which send hcall > + */ > +_GLOBAL(e500_ev_idle) How is that specific to e500? Isn't it just the generic epapr implementation? > + rlwinm r7,r1,0,0,31-THREAD_SHIFT /* current thread_info */ > + lwz r8,TI_LOCAL_FLAGS(r7) /* set napping bit */ > + ori r8,r8,_TLF_NAPPING /* so when we take an exception */ > + stw r8,TI_LOCAL_FLAGS(r7) /* it will return to our caller */ > + wrteei 1 Except for this part of course :). But I'm sure we can generalize this. > + mtctr r6 > + bctr > +#endif /* KVM_GUEST */ > + > /* > * Return from NAP/DOZE mode, restore some CPU specific registers, > * r2 containing physical address of current. > diff --git a/arch/powerpc/kernel/kvm.c b/arch/powerpc/kernel/kvm.c > index 82a9137..8952e12 100644 > --- a/arch/powerpc/kernel/kvm.c > +++ b/arch/powerpc/kernel/kvm.c > @@ -29,6 +29,7 @@ > #include <asm/cacheflush.h> > #include <asm/disassemble.h> > #include <asm/epapr_hcalls.h> > +#include <asm/machdep.h> > > #define KVM_MAGIC_PAGE (-4096L) > #define magic_var(x) KVM_MAGIC_PAGE + offsetof(struct kvm_vcpu_arch_shared, x) > @@ -578,6 +579,25 @@ static __init void kvm_free_tmp(void) > } > } > > +static void kvm_hcall_idle(void) > +{ > +#ifdef CONFIG_KVM_E500 > + ulong in[8]; > + ulong out[8]; > + > + e500_ev_idle(in, out, HC_VENDOR_EPAPR | HC_EV_IDLE, kvm_hypercall); > +#endif ... because then the ifdef goes away here too > +} > + > +static bool kvm_para_has_idle(void) > +{ > +#ifdef CONFIG_BOOKE > + return epapr_hcall_has_idle; > +#else > + return false; > +#endif ... this also shouldn't be an ifdef > +} > + > static int __init kvm_guest_init(void) > { > if (!kvm_para_available()) > @@ -594,6 +614,10 @@ static int __init kvm_guest_init(void) > powersave_nap = 1; > #endif > > + /* Install hcall based power_save for guest kernel */ > + if (kvm_para_has_idle()) > + ppc_md.power_save = kvm_hcall_idle; The way it's now it would break kernels with this patch if we ever choose to implement hcall_idle for non-e500. Please make the code generic :) Alex -- To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 01/05/2012 03:06 AM, Liu Yu wrote: > diff --git a/arch/powerpc/kernel/idle_e500.S b/arch/powerpc/kernel/idle_e500.S > index 3e2b95c..6ea95f0 100644 > --- a/arch/powerpc/kernel/idle_e500.S > +++ b/arch/powerpc/kernel/idle_e500.S > @@ -85,6 +85,23 @@ END_FTR_SECTION_IFSET(CPU_FTR_L2CSR|CPU_FTR_CAN_NAP) > 2: b 2b > #endif /* !E500MC */ > > +#ifdef CONFIG_KVM_GUEST > +/* > + * r3 contains the pointer to in[8] > + * r4 contains the pointer to out[8] > + * r5 contains the hcall vendor and nr > + * r6 contains the handler which send hcall > + */ > +_GLOBAL(e500_ev_idle) > + rlwinm r7,r1,0,0,31-THREAD_SHIFT /* current thread_info */ > + lwz r8,TI_LOCAL_FLAGS(r7) /* set napping bit */ > + ori r8,r8,_TLF_NAPPING /* so when we take an exception */ > + stw r8,TI_LOCAL_FLAGS(r7) /* it will return to our caller */ > + wrteei 1 > + mtctr r6 > + bctr > +#endif /* KVM_GUEST */ You'll need to branch back to the hcall invocation in an infinite loop -- the only way we should leave is via an interrupt. > +static void kvm_hcall_idle(void) > +{ > +#ifdef CONFIG_KVM_E500 > + ulong in[8]; > + ulong out[8]; > + > + e500_ev_idle(in, out, HC_VENDOR_EPAPR | HC_EV_IDLE, kvm_hypercall); > +#endif > +} kvm_hypercall is C code. As stated before, you cannot use C code while _TLF_NAPPING is set. > +static bool kvm_para_has_idle(void) > +{ > +#ifdef CONFIG_BOOKE > + return epapr_hcall_has_idle; > +#else > + return false; > +#endif > +} > + > static int __init kvm_guest_init(void) > { > if (!kvm_para_available()) > @@ -594,6 +614,10 @@ static int __init kvm_guest_init(void) > powersave_nap = 1; > #endif > > + /* Install hcall based power_save for guest kernel */ > + if (kvm_para_has_idle()) > + ppc_md.power_save = kvm_hcall_idle; Why did you only move it halfway out of KVM code? ePAPR features such as idle hcall should work on any ePAPR hypervisor, even with all KVM code disabled. Plus everything Alex said. :-) -Scott -- To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/powerpc/include/asm/epapr_hcalls.h b/arch/powerpc/include/asm/epapr_hcalls.h index c4b86e4..566805e 100644 --- a/arch/powerpc/include/asm/epapr_hcalls.h +++ b/arch/powerpc/include/asm/epapr_hcalls.h @@ -150,6 +150,7 @@ extern u32 *epapr_hcall_insts; extern int epapr_hcall_insts_len; +extern bool epapr_hcall_has_idle; static inline void epapr_get_hcall_insts(u32 **instp, int *lenp) { diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h index 47cacdd..7e56abf 100644 --- a/arch/powerpc/include/asm/machdep.h +++ b/arch/powerpc/include/asm/machdep.h @@ -255,6 +255,11 @@ extern void power4_idle(void); extern void power7_idle(void); extern void ppc6xx_idle(void); extern void book3e_idle(void); +#ifdef CONFIG_KVM_GUEST +extern void e500_ev_idle(unsigned long *, unsigned long *, unsigned long, + unsigned long (*)(unsigned long *, unsigned long *, + unsigned long)); +#endif /* * ppc_md contains a copy of the machine description structure for the diff --git a/arch/powerpc/kernel/epapr_para.c b/arch/powerpc/kernel/epapr_para.c index 714dcb3..1f37ddf 100644 --- a/arch/powerpc/kernel/epapr_para.c +++ b/arch/powerpc/kernel/epapr_para.c @@ -22,6 +22,7 @@ u32 *epapr_hcall_insts; int epapr_hcall_insts_len; +bool epapr_hcall_has_idle; static int __init epapr_para_init(void) { @@ -39,6 +40,9 @@ static int __init epapr_para_init(void) epapr_hcall_insts_len = len; } + if (of_get_property(hyper_node, "has-idle", NULL)) + epapr_hcall_has_idle = true; + return 0; } diff --git a/arch/powerpc/kernel/idle_e500.S b/arch/powerpc/kernel/idle_e500.S index 3e2b95c..6ea95f0 100644 --- a/arch/powerpc/kernel/idle_e500.S +++ b/arch/powerpc/kernel/idle_e500.S @@ -85,6 +85,23 @@ END_FTR_SECTION_IFSET(CPU_FTR_L2CSR|CPU_FTR_CAN_NAP) 2: b 2b #endif /* !E500MC */ +#ifdef CONFIG_KVM_GUEST +/* + * r3 contains the pointer to in[8] + * r4 contains the pointer to out[8] + * r5 contains the hcall vendor and nr + * r6 contains the handler which send hcall + */ +_GLOBAL(e500_ev_idle) + rlwinm r7,r1,0,0,31-THREAD_SHIFT /* current thread_info */ + lwz r8,TI_LOCAL_FLAGS(r7) /* set napping bit */ + ori r8,r8,_TLF_NAPPING /* so when we take an exception */ + stw r8,TI_LOCAL_FLAGS(r7) /* it will return to our caller */ + wrteei 1 + mtctr r6 + bctr +#endif /* KVM_GUEST */ + /* * Return from NAP/DOZE mode, restore some CPU specific registers, * r2 containing physical address of current. diff --git a/arch/powerpc/kernel/kvm.c b/arch/powerpc/kernel/kvm.c index 82a9137..8952e12 100644 --- a/arch/powerpc/kernel/kvm.c +++ b/arch/powerpc/kernel/kvm.c @@ -29,6 +29,7 @@ #include <asm/cacheflush.h> #include <asm/disassemble.h> #include <asm/epapr_hcalls.h> +#include <asm/machdep.h> #define KVM_MAGIC_PAGE (-4096L) #define magic_var(x) KVM_MAGIC_PAGE + offsetof(struct kvm_vcpu_arch_shared, x) @@ -578,6 +579,25 @@ static __init void kvm_free_tmp(void) } } +static void kvm_hcall_idle(void) +{ +#ifdef CONFIG_KVM_E500 + ulong in[8]; + ulong out[8]; + + e500_ev_idle(in, out, HC_VENDOR_EPAPR | HC_EV_IDLE, kvm_hypercall); +#endif +} + +static bool kvm_para_has_idle(void) +{ +#ifdef CONFIG_BOOKE + return epapr_hcall_has_idle; +#else + return false; +#endif +} + static int __init kvm_guest_init(void) { if (!kvm_para_available()) @@ -594,6 +614,10 @@ static int __init kvm_guest_init(void) powersave_nap = 1; #endif + /* Install hcall based power_save for guest kernel */ + if (kvm_para_has_idle()) + ppc_md.power_save = kvm_hcall_idle; + free_tmp: kvm_free_tmp();
If the guest hypervisor node contains "has-idle" property. Signed-off-by: Liu Yu <yu.liu@freescale.com> --- v2: 1. move the idle code into assembly. 2. move the part that check "has-idle" into epapr code. arch/powerpc/include/asm/epapr_hcalls.h | 1 + arch/powerpc/include/asm/machdep.h | 5 +++++ arch/powerpc/kernel/epapr_para.c | 4 ++++ arch/powerpc/kernel/idle_e500.S | 17 +++++++++++++++++ arch/powerpc/kernel/kvm.c | 24 ++++++++++++++++++++++++ 5 files changed, 51 insertions(+), 0 deletions(-)