@@ -226,6 +226,281 @@ static u64 ice_ptp_read_src_incval(struct ice_hw *hw)
return ((u64)(hi & INCVAL_HIGH_M) << 32) | lo;
}
+/**
+ * ice_read_cgu_reg_e82x - Read a CGU register
+ * @hw: pointer to the HW struct
+ * @addr: Register address to read
+ * @val: storage for register value read
+ *
+ * Read the contents of a register of the Clock Generation Unit. Only
+ * applicable to E822 devices.
+ */
+static int ice_read_cgu_reg_e82x(struct ice_hw *hw, u32 addr, u32 *val)
+{
+ struct ice_sbq_msg_input cgu_msg = {
+ .opcode = ice_sbq_msg_rd,
+ .dest_dev = cgu,
+ .msg_addr_low = addr
+ };
+ int err;
+
+ err = ice_sbq_rw_reg(hw, &cgu_msg);
+ if (err) {
+ ice_debug(hw, ICE_DBG_PTP, "Failed to read CGU register 0x%04x, err %d\n",
+ addr, err);
+ return err;
+ }
+
+ *val = cgu_msg.data;
+
+ return 0;
+}
+
+/**
+ * ice_write_cgu_reg_e82x - Write a CGU register
+ * @hw: pointer to the HW struct
+ * @addr: Register address to write
+ * @val: value to write into the register
+ *
+ * Write the specified value to a register of the Clock Generation Unit. Only
+ * applicable to E822 devices.
+ */
+static int ice_write_cgu_reg_e82x(struct ice_hw *hw, u32 addr, u32 val)
+{
+ struct ice_sbq_msg_input cgu_msg = {
+ .opcode = ice_sbq_msg_wr,
+ .dest_dev = cgu,
+ .msg_addr_low = addr,
+ .data = val
+ };
+ int err;
+
+ err = ice_sbq_rw_reg(hw, &cgu_msg);
+ if (err) {
+ ice_debug(hw, ICE_DBG_PTP, "Failed to write CGU register 0x%04x, err %d\n",
+ addr, err);
+ return err;
+ }
+
+ return err;
+}
+
+/**
+ * ice_clk_freq_str - Convert time_ref_freq to string
+ * @clk_freq: Clock frequency
+ *
+ * Convert the specified TIME_REF clock frequency to a string.
+ */
+static const char *ice_clk_freq_str(enum ice_time_ref_freq clk_freq)
+{
+ switch (clk_freq) {
+ case ICE_TIME_REF_FREQ_25_000:
+ return "25 MHz";
+ case ICE_TIME_REF_FREQ_122_880:
+ return "122.88 MHz";
+ case ICE_TIME_REF_FREQ_125_000:
+ return "125 MHz";
+ case ICE_TIME_REF_FREQ_153_600:
+ return "153.6 MHz";
+ case ICE_TIME_REF_FREQ_156_250:
+ return "156.25 MHz";
+ case ICE_TIME_REF_FREQ_245_760:
+ return "245.76 MHz";
+ default:
+ return "Unknown";
+ }
+}
+
+/**
+ * ice_clk_src_str - Convert time_ref_src to string
+ * @clk_src: Clock source
+ *
+ * Convert the specified clock source to its string name.
+ */
+static const char *ice_clk_src_str(enum ice_clk_src clk_src)
+{
+ switch (clk_src) {
+ case ICE_CLK_SRC_TCX0:
+ return "TCX0";
+ case ICE_CLK_SRC_TIME_REF:
+ return "TIME_REF";
+ default:
+ return "Unknown";
+ }
+}
+
+/**
+ * ice_cfg_cgu_pll_e82x - Configure the Clock Generation Unit
+ * @hw: pointer to the HW struct
+ * @clk_freq: Clock frequency to program
+ * @clk_src: Clock source to select (TIME_REF, or TCX0)
+ *
+ * Configure the Clock Generation Unit with the desired clock frequency and
+ * time reference, enabling the PLL which drives the PTP hardware clock.
+ */
+static int ice_cfg_cgu_pll_e82x(struct ice_hw *hw,
+ enum ice_time_ref_freq clk_freq,
+ enum ice_clk_src clk_src)
+{
+ union tspll_ro_bwm_lf bwm_lf;
+ union nac_cgu_dword19 dw19;
+ union nac_cgu_dword22 dw22;
+ union nac_cgu_dword24 dw24;
+ union nac_cgu_dword9 dw9;
+ int err;
+
+ if (clk_freq >= NUM_ICE_TIME_REF_FREQ) {
+ dev_warn(ice_hw_to_dev(hw), "Invalid TIME_REF frequency %u\n",
+ clk_freq);
+ return -EINVAL;
+ }
+
+ if (clk_src >= NUM_ICE_CLK_SRC) {
+ dev_warn(ice_hw_to_dev(hw), "Invalid clock source %u\n",
+ clk_src);
+ return -EINVAL;
+ }
+
+ if (clk_src == ICE_CLK_SRC_TCX0 &&
+ clk_freq != ICE_TIME_REF_FREQ_25_000) {
+ dev_warn(ice_hw_to_dev(hw),
+ "TCX0 only supports 25 MHz frequency\n");
+ return -EINVAL;
+ }
+
+ err = ice_read_cgu_reg_e82x(hw, NAC_CGU_DWORD9, &dw9.val);
+ if (err)
+ return err;
+
+ err = ice_read_cgu_reg_e82x(hw, NAC_CGU_DWORD24, &dw24.val);
+ if (err)
+ return err;
+
+ err = ice_read_cgu_reg_e82x(hw, TSPLL_RO_BWM_LF, &bwm_lf.val);
+ if (err)
+ return err;
+
+ /* Log the current clock configuration */
+ ice_debug(hw, ICE_DBG_PTP, "Current CGU configuration -- %s, clk_src %s, clk_freq %s, PLL %s\n",
+ dw24.field.ts_pll_enable ? "enabled" : "disabled",
+ ice_clk_src_str(dw24.field.time_ref_sel),
+ ice_clk_freq_str(dw9.field.time_ref_freq_sel),
+ bwm_lf.field.plllock_true_lock_cri ? "locked" : "unlocked");
+
+ /* Disable the PLL before changing the clock source or frequency */
+ if (dw24.field.ts_pll_enable) {
+ dw24.field.ts_pll_enable = 0;
+
+ err = ice_write_cgu_reg_e82x(hw, NAC_CGU_DWORD24, dw24.val);
+ if (err)
+ return err;
+ }
+
+ /* Set the frequency */
+ dw9.field.time_ref_freq_sel = clk_freq;
+ err = ice_write_cgu_reg_e82x(hw, NAC_CGU_DWORD9, dw9.val);
+ if (err)
+ return err;
+
+ /* Configure the TS PLL feedback divisor */
+ err = ice_read_cgu_reg_e82x(hw, NAC_CGU_DWORD19, &dw19.val);
+ if (err)
+ return err;
+
+ dw19.field.tspll_fbdiv_intgr = e822_cgu_params[clk_freq].feedback_div;
+ dw19.field.tspll_ndivratio = 1;
+
+ err = ice_write_cgu_reg_e82x(hw, NAC_CGU_DWORD19, dw19.val);
+ if (err)
+ return err;
+
+ /* Configure the TS PLL post divisor */
+ err = ice_read_cgu_reg_e82x(hw, NAC_CGU_DWORD22, &dw22.val);
+ if (err)
+ return err;
+
+ dw22.field.time1588clk_div = e822_cgu_params[clk_freq].post_pll_div;
+ dw22.field.time1588clk_sel_div2 = 0;
+
+ err = ice_write_cgu_reg_e82x(hw, NAC_CGU_DWORD22, dw22.val);
+ if (err)
+ return err;
+
+ /* Configure the TS PLL pre divisor and clock source */
+ err = ice_read_cgu_reg_e82x(hw, NAC_CGU_DWORD24, &dw24.val);
+ if (err)
+ return err;
+
+ dw24.field.ref1588_ck_div = e822_cgu_params[clk_freq].refclk_pre_div;
+ dw24.field.tspll_fbdiv_frac = e822_cgu_params[clk_freq].frac_n_div;
+ dw24.field.time_ref_sel = clk_src;
+
+ err = ice_write_cgu_reg_e82x(hw, NAC_CGU_DWORD24, dw24.val);
+ if (err)
+ return err;
+
+ /* Finally, enable the PLL */
+ dw24.field.ts_pll_enable = 1;
+
+ err = ice_write_cgu_reg_e82x(hw, NAC_CGU_DWORD24, dw24.val);
+ if (err)
+ return err;
+
+ /* Wait to verify if the PLL locks */
+ usleep_range(1000, 5000);
+
+ err = ice_read_cgu_reg_e82x(hw, TSPLL_RO_BWM_LF, &bwm_lf.val);
+ if (err)
+ return err;
+
+ if (!bwm_lf.field.plllock_true_lock_cri) {
+ dev_warn(ice_hw_to_dev(hw), "CGU PLL failed to lock\n");
+ return -EBUSY;
+ }
+
+ /* Log the current clock configuration */
+ ice_debug(hw, ICE_DBG_PTP, "New CGU configuration -- %s, clk_src %s, clk_freq %s, PLL %s\n",
+ dw24.field.ts_pll_enable ? "enabled" : "disabled",
+ ice_clk_src_str(dw24.field.time_ref_sel),
+ ice_clk_freq_str(dw9.field.time_ref_freq_sel),
+ bwm_lf.field.plllock_true_lock_cri ? "locked" : "unlocked");
+
+ return 0;
+}
+
+/**
+ * ice_init_cgu_e82x - Initialize CGU with settings from firmware
+ * @hw: pointer to the HW structure
+ *
+ * Initialize the Clock Generation Unit of the E822 device.
+ */
+static int ice_init_cgu_e82x(struct ice_hw *hw)
+{
+ struct ice_ts_func_info *ts_info = &hw->func_caps.ts_func_info;
+ union tspll_cntr_bist_settings cntr_bist;
+ int err;
+
+ err = ice_read_cgu_reg_e82x(hw, TSPLL_CNTR_BIST_SETTINGS,
+ &cntr_bist.val);
+ if (err)
+ return err;
+
+ /* Disable sticky lock detection so lock err reported is accurate */
+ cntr_bist.field.i_plllock_sel_0 = 0;
+ cntr_bist.field.i_plllock_sel_1 = 0;
+
+ err = ice_write_cgu_reg_e82x(hw, TSPLL_CNTR_BIST_SETTINGS,
+ cntr_bist.val);
+ if (err)
+ return err;
+
+ /* Configure the CGU PLL using the parameters from the function
+ * capabilities.
+ */
+ return ice_cfg_cgu_pll_e82x(hw, ts_info->time_ref,
+ (enum ice_clk_src)ts_info->clk_src);
+}
+
/**
* ice_ptp_tmr_cmd_to_src_reg - Convert to source timer command value
* @hw: pointer to HW struct
@@ -623,9 +898,8 @@ ice_write_40b_phy_reg_e82x(struct ice_hw *hw, u8 port, u16 low_addr, u64 val)
low_addr);
return -EINVAL;
}
-
- low = (u32)(val & P_REG_40B_LOW_M);
- high = (u32)(val >> P_REG_40B_HIGH_S);
+ low = FIELD_GET(P_REG_40B_LOW_M, val);
+ high = FIELD_GET(P_REG_40B_HIGH_M, val);
err = ice_write_phy_reg_e82x(hw, port, low_addr, low);
if (err) {
@@ -830,7 +1104,7 @@ ice_read_phy_tstamp_e82x(struct ice_hw *hw, u8 quad, u8 idx, u64 *tstamp)
* lower 8 bits in the low register, and the upper 32 bits in the high
* register.
*/
- *tstamp = ((u64)hi) << TS_PHY_HIGH_S | ((u64)lo & TS_PHY_LOW_M);
+ *tstamp = FIELD_PREP(TS_PHY_HIGH_M, hi) | FIELD_PREP(TS_PHY_LOW_M, lo);
return 0;
}
@@ -884,7 +1158,7 @@ ice_clear_phy_tstamp_e82x(struct ice_hw *hw, u8 quad, u8 idx)
void ice_ptp_reset_ts_memory_quad_e82x(struct ice_hw *hw, u8 quad)
{
ice_write_quad_reg_e82x(hw, quad, Q_REG_TS_CTRL, Q_REG_TS_CTRL_M);
- ice_write_quad_reg_e82x(hw, quad, Q_REG_TS_CTRL, ~(u32)Q_REG_TS_CTRL_M);
+ ice_write_quad_reg_e82x(hw, quad, Q_REG_TS_CTRL, (u32)~Q_REG_TS_CTRL_M);
}
/**
@@ -899,289 +1173,6 @@ static void ice_ptp_reset_ts_memory_e82x(struct ice_hw *hw)
ice_ptp_reset_ts_memory_quad_e82x(hw, quad);
}
-/**
- * ice_read_cgu_reg_e82x - Read a CGU register
- * @hw: pointer to the HW struct
- * @addr: Register address to read
- * @val: storage for register value read
- *
- * Read the contents of a register of the Clock Generation Unit. Only
- * applicable to E822 devices.
- */
-static int
-ice_read_cgu_reg_e82x(struct ice_hw *hw, u32 addr, u32 *val)
-{
- struct ice_sbq_msg_input cgu_msg;
- int err;
-
- cgu_msg.opcode = ice_sbq_msg_rd;
- cgu_msg.dest_dev = cgu;
- cgu_msg.msg_addr_low = addr;
- cgu_msg.msg_addr_high = 0x0;
-
- err = ice_sbq_rw_reg(hw, &cgu_msg);
- if (err) {
- ice_debug(hw, ICE_DBG_PTP, "Failed to read CGU register 0x%04x, err %d\n",
- addr, err);
- return err;
- }
-
- *val = cgu_msg.data;
-
- return err;
-}
-
-/**
- * ice_write_cgu_reg_e82x - Write a CGU register
- * @hw: pointer to the HW struct
- * @addr: Register address to write
- * @val: value to write into the register
- *
- * Write the specified value to a register of the Clock Generation Unit. Only
- * applicable to E822 devices.
- */
-static int
-ice_write_cgu_reg_e82x(struct ice_hw *hw, u32 addr, u32 val)
-{
- struct ice_sbq_msg_input cgu_msg;
- int err;
-
- cgu_msg.opcode = ice_sbq_msg_wr;
- cgu_msg.dest_dev = cgu;
- cgu_msg.msg_addr_low = addr;
- cgu_msg.msg_addr_high = 0x0;
- cgu_msg.data = val;
-
- err = ice_sbq_rw_reg(hw, &cgu_msg);
- if (err) {
- ice_debug(hw, ICE_DBG_PTP, "Failed to write CGU register 0x%04x, err %d\n",
- addr, err);
- return err;
- }
-
- return err;
-}
-
-/**
- * ice_clk_freq_str - Convert time_ref_freq to string
- * @clk_freq: Clock frequency
- *
- * Convert the specified TIME_REF clock frequency to a string.
- */
-static const char *ice_clk_freq_str(u8 clk_freq)
-{
- switch ((enum ice_time_ref_freq)clk_freq) {
- case ICE_TIME_REF_FREQ_25_000:
- return "25 MHz";
- case ICE_TIME_REF_FREQ_122_880:
- return "122.88 MHz";
- case ICE_TIME_REF_FREQ_125_000:
- return "125 MHz";
- case ICE_TIME_REF_FREQ_153_600:
- return "153.6 MHz";
- case ICE_TIME_REF_FREQ_156_250:
- return "156.25 MHz";
- case ICE_TIME_REF_FREQ_245_760:
- return "245.76 MHz";
- default:
- return "Unknown";
- }
-}
-
-/**
- * ice_clk_src_str - Convert time_ref_src to string
- * @clk_src: Clock source
- *
- * Convert the specified clock source to its string name.
- */
-static const char *ice_clk_src_str(u8 clk_src)
-{
- switch ((enum ice_clk_src)clk_src) {
- case ICE_CLK_SRC_TCX0:
- return "TCX0";
- case ICE_CLK_SRC_TIME_REF:
- return "TIME_REF";
- default:
- return "Unknown";
- }
-}
-
-/**
- * ice_cfg_cgu_pll_e82x - Configure the Clock Generation Unit
- * @hw: pointer to the HW struct
- * @clk_freq: Clock frequency to program
- * @clk_src: Clock source to select (TIME_REF, or TCX0)
- *
- * Configure the Clock Generation Unit with the desired clock frequency and
- * time reference, enabling the PLL which drives the PTP hardware clock.
- */
-static int
-ice_cfg_cgu_pll_e82x(struct ice_hw *hw, enum ice_time_ref_freq clk_freq,
- enum ice_clk_src clk_src)
-{
- union tspll_ro_bwm_lf bwm_lf;
- union nac_cgu_dword19 dw19;
- union nac_cgu_dword22 dw22;
- union nac_cgu_dword24 dw24;
- union nac_cgu_dword9 dw9;
- int err;
-
- if (clk_freq >= NUM_ICE_TIME_REF_FREQ) {
- dev_warn(ice_hw_to_dev(hw), "Invalid TIME_REF frequency %u\n",
- clk_freq);
- return -EINVAL;
- }
-
- if (clk_src >= NUM_ICE_CLK_SRC) {
- dev_warn(ice_hw_to_dev(hw), "Invalid clock source %u\n",
- clk_src);
- return -EINVAL;
- }
-
- if (clk_src == ICE_CLK_SRC_TCX0 &&
- clk_freq != ICE_TIME_REF_FREQ_25_000) {
- dev_warn(ice_hw_to_dev(hw),
- "TCX0 only supports 25 MHz frequency\n");
- return -EINVAL;
- }
-
- err = ice_read_cgu_reg_e82x(hw, NAC_CGU_DWORD9, &dw9.val);
- if (err)
- return err;
-
- err = ice_read_cgu_reg_e82x(hw, NAC_CGU_DWORD24, &dw24.val);
- if (err)
- return err;
-
- err = ice_read_cgu_reg_e82x(hw, TSPLL_RO_BWM_LF, &bwm_lf.val);
- if (err)
- return err;
-
- /* Log the current clock configuration */
- ice_debug(hw, ICE_DBG_PTP, "Current CGU configuration -- %s, clk_src %s, clk_freq %s, PLL %s\n",
- dw24.field.ts_pll_enable ? "enabled" : "disabled",
- ice_clk_src_str(dw24.field.time_ref_sel),
- ice_clk_freq_str(dw9.field.time_ref_freq_sel),
- bwm_lf.field.plllock_true_lock_cri ? "locked" : "unlocked");
-
- /* Disable the PLL before changing the clock source or frequency */
- if (dw24.field.ts_pll_enable) {
- dw24.field.ts_pll_enable = 0;
-
- err = ice_write_cgu_reg_e82x(hw, NAC_CGU_DWORD24, dw24.val);
- if (err)
- return err;
- }
-
- /* Set the frequency */
- dw9.field.time_ref_freq_sel = clk_freq;
- err = ice_write_cgu_reg_e82x(hw, NAC_CGU_DWORD9, dw9.val);
- if (err)
- return err;
-
- /* Configure the TS PLL feedback divisor */
- err = ice_read_cgu_reg_e82x(hw, NAC_CGU_DWORD19, &dw19.val);
- if (err)
- return err;
-
- dw19.field.tspll_fbdiv_intgr = e822_cgu_params[clk_freq].feedback_div;
- dw19.field.tspll_ndivratio = 1;
-
- err = ice_write_cgu_reg_e82x(hw, NAC_CGU_DWORD19, dw19.val);
- if (err)
- return err;
-
- /* Configure the TS PLL post divisor */
- err = ice_read_cgu_reg_e82x(hw, NAC_CGU_DWORD22, &dw22.val);
- if (err)
- return err;
-
- dw22.field.time1588clk_div = e822_cgu_params[clk_freq].post_pll_div;
- dw22.field.time1588clk_sel_div2 = 0;
-
- err = ice_write_cgu_reg_e82x(hw, NAC_CGU_DWORD22, dw22.val);
- if (err)
- return err;
-
- /* Configure the TS PLL pre divisor and clock source */
- err = ice_read_cgu_reg_e82x(hw, NAC_CGU_DWORD24, &dw24.val);
- if (err)
- return err;
-
- dw24.field.ref1588_ck_div = e822_cgu_params[clk_freq].refclk_pre_div;
- dw24.field.tspll_fbdiv_frac = e822_cgu_params[clk_freq].frac_n_div;
- dw24.field.time_ref_sel = clk_src;
-
- err = ice_write_cgu_reg_e82x(hw, NAC_CGU_DWORD24, dw24.val);
- if (err)
- return err;
-
- /* Finally, enable the PLL */
- dw24.field.ts_pll_enable = 1;
-
- err = ice_write_cgu_reg_e82x(hw, NAC_CGU_DWORD24, dw24.val);
- if (err)
- return err;
-
- /* Wait to verify if the PLL locks */
- usleep_range(1000, 5000);
-
- err = ice_read_cgu_reg_e82x(hw, TSPLL_RO_BWM_LF, &bwm_lf.val);
- if (err)
- return err;
-
- if (!bwm_lf.field.plllock_true_lock_cri) {
- dev_warn(ice_hw_to_dev(hw), "CGU PLL failed to lock\n");
- return -EBUSY;
- }
-
- /* Log the current clock configuration */
- ice_debug(hw, ICE_DBG_PTP, "New CGU configuration -- %s, clk_src %s, clk_freq %s, PLL %s\n",
- dw24.field.ts_pll_enable ? "enabled" : "disabled",
- ice_clk_src_str(dw24.field.time_ref_sel),
- ice_clk_freq_str(dw9.field.time_ref_freq_sel),
- bwm_lf.field.plllock_true_lock_cri ? "locked" : "unlocked");
-
- return 0;
-}
-
-/**
- * ice_init_cgu_e82x - Initialize CGU with settings from firmware
- * @hw: pointer to the HW structure
- *
- * Initialize the Clock Generation Unit of the E822 device.
- */
-static int ice_init_cgu_e82x(struct ice_hw *hw)
-{
- struct ice_ts_func_info *ts_info = &hw->func_caps.ts_func_info;
- union tspll_cntr_bist_settings cntr_bist;
- int err;
-
- err = ice_read_cgu_reg_e82x(hw, TSPLL_CNTR_BIST_SETTINGS,
- &cntr_bist.val);
- if (err)
- return err;
-
- /* Disable sticky lock detection so lock err reported is accurate */
- cntr_bist.field.i_plllock_sel_0 = 0;
- cntr_bist.field.i_plllock_sel_1 = 0;
-
- err = ice_write_cgu_reg_e82x(hw, TSPLL_CNTR_BIST_SETTINGS,
- cntr_bist.val);
- if (err)
- return err;
-
- /* Configure the CGU PLL using the parameters from the function
- * capabilities.
- */
- err = ice_cfg_cgu_pll_e82x(hw, ts_info->time_ref,
- (enum ice_clk_src)ts_info->clk_src);
- if (err)
- return err;
-
- return 0;
-}
-
/**
* ice_ptp_set_vernier_wl - Set the window length for vernier calibration
* @hw: pointer to the HW struct
@@ -377,8 +377,8 @@ int ice_cgu_get_output_pin_state_caps(struct ice_hw *hw, u8 pin_id,
#define P_REG_TIMETUS_L 0x410
#define P_REG_TIMETUS_U 0x414
-#define P_REG_40B_LOW_M 0xFF
-#define P_REG_40B_HIGH_S 8
+#define P_REG_40B_LOW_M GENMASK(7, 0)
+#define P_REG_40B_HIGH_M GENMASK(39, 8)
/* PHY window length registers */
#define P_REG_WL 0x40C