diff mbox series

[net-next,v1,2/3] ice: Use PTP auxbus for all PHYs restart in E822

Message ID 20230720121357.26739-3-michal.michalik@intel.com
State Changes Requested
Headers show
Series ice: add PTP auxiliary bus support | expand

Commit Message

Michal Michalik July 20, 2023, 12:13 p.m. UTC 
The E822 (and other devices based on the same PHY) is having issue while
setting the PHC timer - the PHY timers are drifting from the PHC. After
such a set all PHYs need to be restarted and resynchronised - do it
using auxiliary bus.

Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Michal Michalik <michal.michalik@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_ptp.c | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/intel/ice/ice_ptp.c b/drivers/net/ethernet/intel/ice/ice_ptp.c
index 9a2cd038..7fced6e 100644
--- a/drivers/net/ethernet/intel/ice/ice_ptp.c
+++ b/drivers/net/ethernet/intel/ice/ice_ptp.c
@@ -1491,6 +1491,24 @@  static void ice_ptp_reset_phy_timestamping(struct ice_pf *pf)
 }
 
 /**
+ * ice_ptp_restart_all_phy - Restart all PHYs to recalibrate timestamping
+ * @pf: Board private structure
+ */
+static void ice_ptp_restart_all_phy(struct ice_pf *pf)
+{
+	struct list_head *entry;
+
+	list_for_each(entry, &pf->ptp.ports_owner.ports) {
+		struct ice_ptp_port *port = list_entry(entry,
+						       struct ice_ptp_port,
+						       list_member);
+
+		if (port->link_up)
+			ice_ptp_port_phy_restart(port);
+	}
+}
+
+/**
  * ice_ptp_adjfine - Adjust clock increment rate
  * @info: the driver's PTP info structure
  * @scaled_ppm: Parts per million with 16-bit fractional field
@@ -1927,9 +1945,9 @@  ice_ptp_settime64(struct ptp_clock_info *info, const struct timespec64 *ts)
 	/* Reenable periodic outputs */
 	ice_ptp_enable_all_clkout(pf);
 
-	/* Recalibrate and re-enable timestamp block */
-	if (pf->ptp.port.link_up)
-		ice_ptp_port_phy_restart(&pf->ptp.port);
+	/* Recalibrate and re-enable timestamp blocks for E822/E823 */
+	if (!ice_is_e810(hw))
+		ice_ptp_restart_all_phy(pf);
 exit:
 	if (err) {
 		dev_err(ice_pf_to_dev(pf), "PTP failed to set time %d\n", err);