Message ID | 20221215225211.1071-1-muhammad.husaini.zulkifli@intel.com |
---|---|
State | Changes Requested |
Delegated to: | Anthony Nguyen |
Headers | show |
Series | [net-next,v2] igc: Add qbv_config_change_errors counter | expand |
On 12/16/2022 00:52, Muhammad Husaini Zulkifli wrote: > Add ConfigChangeError(qbv_config_change_errors) when user try to set the > AdminBaseTime to past value while the current GCL is still running. > > The ConfigChangeError counter should not be increased when a gate control > list is scheduled into the future. > > User can use "ethtool -S <interface> | grep qbv_config_change_errors" > command to check the counter values. > > Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> > > --- > V1 -> V2: Fix wrong tree applied > --- > --- > drivers/net/ethernet/intel/igc/igc.h | 1 + > drivers/net/ethernet/intel/igc/igc_ethtool.c | 1 + > drivers/net/ethernet/intel/igc/igc_main.c | 1 + > drivers/net/ethernet/intel/igc/igc_tsn.c | 6 ++++++ > 4 files changed, 9 insertions(+) Tested-by: Naama Meir <naamax.meir@linux.intel.com>
diff --git a/drivers/net/ethernet/intel/igc/igc.h b/drivers/net/ethernet/intel/igc/igc.h index 5da8d162cd38..9db93c1f9767 100644 --- a/drivers/net/ethernet/intel/igc/igc.h +++ b/drivers/net/ethernet/intel/igc/igc.h @@ -185,6 +185,7 @@ struct igc_adapter { ktime_t base_time; ktime_t cycle_time; bool qbv_enable; + u32 qbv_config_change_errors; /* OS defined structs */ struct pci_dev *pdev; diff --git a/drivers/net/ethernet/intel/igc/igc_ethtool.c b/drivers/net/ethernet/intel/igc/igc_ethtool.c index 5a26a7805ef8..0e2cb00622d1 100644 --- a/drivers/net/ethernet/intel/igc/igc_ethtool.c +++ b/drivers/net/ethernet/intel/igc/igc_ethtool.c @@ -67,6 +67,7 @@ static const struct igc_stats igc_gstrings_stats[] = { IGC_STAT("rx_hwtstamp_cleared", rx_hwtstamp_cleared), IGC_STAT("tx_lpi_counter", stats.tlpic), IGC_STAT("rx_lpi_counter", stats.rlpic), + IGC_STAT("qbv_config_change_errors", qbv_config_change_errors), }; #define IGC_NETDEV_STAT(_net_stat) { \ diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c index fdb7f0b26ed0..4947b0f308cd 100644 --- a/drivers/net/ethernet/intel/igc/igc_main.c +++ b/drivers/net/ethernet/intel/igc/igc_main.c @@ -6012,6 +6012,7 @@ static int igc_tsn_clear_schedule(struct igc_adapter *adapter) adapter->base_time = 0; adapter->cycle_time = NSEC_PER_SEC; + adapter->qbv_config_change_errors = 0; for (i = 0; i < adapter->num_tx_queues; i++) { struct igc_ring *ring = adapter->tx_ring[i]; diff --git a/drivers/net/ethernet/intel/igc/igc_tsn.c b/drivers/net/ethernet/intel/igc/igc_tsn.c index b03c6168bd23..a6b963839741 100644 --- a/drivers/net/ethernet/intel/igc/igc_tsn.c +++ b/drivers/net/ethernet/intel/igc/igc_tsn.c @@ -239,6 +239,12 @@ static int igc_tsn_enable_offload(struct igc_adapter *adapter) s64 n = div64_s64(ktime_sub_ns(systim, base_time), cycle); base_time = ktime_add_ns(base_time, (n + 1) * cycle); + + /* Increase the counter if scheduling into the past while + * Gate Control List (GCL) is running. + */ + if (rd32(IGC_BASET_H) || rd32(IGC_BASET_L)) + adapter->qbv_config_change_errors++; } else { /* According to datasheet section 7.5.2.9.3.3, FutScdDis bit * has to be configured before the cycle time and base time.
Add ConfigChangeError(qbv_config_change_errors) when user try to set the AdminBaseTime to past value while the current GCL is still running. The ConfigChangeError counter should not be increased when a gate control list is scheduled into the future. User can use "ethtool -S <interface> | grep qbv_config_change_errors" command to check the counter values. Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> --- V1 -> V2: Fix wrong tree applied --- --- drivers/net/ethernet/intel/igc/igc.h | 1 + drivers/net/ethernet/intel/igc/igc_ethtool.c | 1 + drivers/net/ethernet/intel/igc/igc_main.c | 1 + drivers/net/ethernet/intel/igc/igc_tsn.c | 6 ++++++ 4 files changed, 9 insertions(+)