Message ID | 20221215033911.18152-1-muhammad.husaini.zulkifli@intel.com |
---|---|
State | Changes Requested |
Headers | show |
Series | [net-next,v1] igc: Add qbv_config_change_errors counter | expand |
> -----Original Message----- > From: Zulkifli, Muhammad Husaini <muhammad.husaini.zulkifli@intel.com> > Sent: Wednesday, December 14, 2022 7:39 PM > To: intel-wired-lan@osuosl.org; Gomes, Vinicius <vinicius.gomes@intel.com> > Cc: Zulkifli, Muhammad Husaini <muhammad.husaini.zulkifli@intel.com>; > naamax.meir@linux.intel.com; Nguyen, Anthony L > <anthony.l.nguyen@intel.com> > Subject: [PATCH net-next v1] igc: Add qbv_config_change_errors counter > > Add ConfigChangeError(qbv_config_change_errors) when user try to set the > AdminBaseTime to past value while the current GCL is still running. > > The ConfigChangeError counter should not be increased when a gate control list > is scheduled into the future. > > User can use "ethtool -S <interface> | grep qbv_config_change_errors" > command to check the counter values. > > Signed-off-by: Muhammad Husaini Zulkifli > <muhammad.husaini.zulkifli@intel.com> This patch doesn't apply to the tree.
Hi Anthony, > -----Original Message----- > From: Nguyen, Anthony L <anthony.l.nguyen@intel.com> > Sent: Friday, 16 December, 2022 2:32 AM > To: Zulkifli, Muhammad Husaini <muhammad.husaini.zulkifli@intel.com>; > intel-wired-lan@osuosl.org; Gomes, Vinicius <vinicius.gomes@intel.com> > Cc: naamax.meir@linux.intel.com > Subject: RE: [PATCH net-next v1] igc: Add qbv_config_change_errors counter > > > -----Original Message----- > > From: Zulkifli, Muhammad Husaini <muhammad.husaini.zulkifli@intel.com> > > Sent: Wednesday, December 14, 2022 7:39 PM > > To: intel-wired-lan@osuosl.org; Gomes, Vinicius > > <vinicius.gomes@intel.com> > > Cc: Zulkifli, Muhammad Husaini <muhammad.husaini.zulkifli@intel.com>; > > naamax.meir@linux.intel.com; Nguyen, Anthony L > > <anthony.l.nguyen@intel.com> > > Subject: [PATCH net-next v1] igc: Add qbv_config_change_errors counter > > > > Add ConfigChangeError(qbv_config_change_errors) when user try to set > > the AdminBaseTime to past value while the current GCL is still running. > > > > The ConfigChangeError counter should not be increased when a gate > > control list is scheduled into the future. > > > > User can use "ethtool -S <interface> | grep qbv_config_change_errors" > > command to check the counter values. > > > > Signed-off-by: Muhammad Husaini Zulkifli > > <muhammad.husaini.zulkifli@intel.com> > > This patch doesn't apply to the tree. My bad. I will send v2 to fix this. Thanks, Husaini
diff --git a/drivers/net/ethernet/intel/igc/igc.h b/drivers/net/ethernet/intel/igc/igc.h index 1f3f83013125..5b191798504c 100644 --- a/drivers/net/ethernet/intel/igc/igc.h +++ b/drivers/net/ethernet/intel/igc/igc.h @@ -196,6 +196,7 @@ struct igc_adapter { bool frame_preemption_active; u32 add_frag_size; bool qbv_enable; + u32 qbv_config_change_errors; /* OS defined structs */ struct pci_dev *pdev; diff --git a/drivers/net/ethernet/intel/igc/igc_ethtool.c b/drivers/net/ethernet/intel/igc/igc_ethtool.c index d72a51f6fec2..165dbcda600d 100644 --- a/drivers/net/ethernet/intel/igc/igc_ethtool.c +++ b/drivers/net/ethernet/intel/igc/igc_ethtool.c @@ -68,6 +68,7 @@ static const struct igc_stats igc_gstrings_stats[] = { IGC_STAT("rx_hwtstamp_cleared", rx_hwtstamp_cleared), IGC_STAT("tx_lpi_counter", stats.tlpic), IGC_STAT("rx_lpi_counter", stats.rlpic), + IGC_STAT("qbv_config_change_errors", qbv_config_change_errors), }; #define IGC_NETDEV_STAT(_net_stat) { \ diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c index fbc81b8a0b50..c83fbabe98fc 100644 --- a/drivers/net/ethernet/intel/igc/igc_main.c +++ b/drivers/net/ethernet/intel/igc/igc_main.c @@ -6194,6 +6194,7 @@ static int igc_tsn_clear_schedule(struct igc_adapter *adapter) adapter->base_time = 0; adapter->cycle_time = NSEC_PER_SEC; + adapter->qbv_config_change_errors = 0; for (i = 0; i < adapter->num_tx_queues; i++) { struct igc_ring *ring = adapter->tx_ring[i]; diff --git a/drivers/net/ethernet/intel/igc/igc_tsn.c b/drivers/net/ethernet/intel/igc/igc_tsn.c index 1de93d07ea24..3eb7fd7fb0a8 100644 --- a/drivers/net/ethernet/intel/igc/igc_tsn.c +++ b/drivers/net/ethernet/intel/igc/igc_tsn.c @@ -239,6 +239,12 @@ static int igc_tsn_enable_offload(struct igc_adapter *adapter) s64 n = div64_s64(ktime_sub_ns(systim, base_time), cycle); base_time = ktime_add_ns(base_time, (n + 1) * cycle); + + /* Increase the counter if scheduling into the past while + * Gate Control List (GCL) is running. + */ + if (rd32(IGC_BASET_H) || rd32(IGC_BASET_L)) + adapter->qbv_config_change_errors++; } else { /* According to datasheet section 7.5.2.9.3.3, FutScdDis bit * has to be configured before the cycle time and base time.
Add ConfigChangeError(qbv_config_change_errors) when user try to set the AdminBaseTime to past value while the current GCL is still running. The ConfigChangeError counter should not be increased when a gate control list is scheduled into the future. User can use "ethtool -S <interface> | grep qbv_config_change_errors" command to check the counter values. Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> --- drivers/net/ethernet/intel/igc/igc.h | 1 + drivers/net/ethernet/intel/igc/igc_ethtool.c | 1 + drivers/net/ethernet/intel/igc/igc_main.c | 1 + drivers/net/ethernet/intel/igc/igc_tsn.c | 6 ++++++ 4 files changed, 9 insertions(+)