@@ -5076,6 +5076,108 @@ static void igc_shutdown(struct pci_dev *pdev)
}
}
+/**
+ * igc_io_error_detected - called when PCI error is detected
+ * @pdev: Pointer to PCI device
+ * @state: The current PCI connection state
+ *
+ * This function is called after a PCI bus error affecting
+ * this device has been detected.
+ **/
+static pci_ers_result_t igc_io_error_detected(struct pci_dev *pdev,
+ pci_channel_state_t state)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igc_adapter *adapter = netdev_priv(netdev);
+
+ netif_device_detach(netdev);
+
+ if (state == pci_channel_io_perm_failure)
+ return PCI_ERS_RESULT_DISCONNECT;
+
+ if (netif_running(netdev))
+ igc_down(adapter);
+ pci_disable_device(pdev);
+
+ /* Request a slot reset. */
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * igc_io_slot_reset - called after the PCI bus has been reset.
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch, as if from a cold-boot. Implementation
+ * resembles the first-half of the igc_resume routine.
+ **/
+static pci_ers_result_t igc_io_slot_reset(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igc_adapter *adapter = netdev_priv(netdev);
+ struct igc_hw *hw = &adapter->hw;
+ pci_ers_result_t result;
+
+ if (pci_enable_device_mem(pdev)) {
+ dev_err(&pdev->dev,
+ "Could not re-enable PCI device after reset.\n");
+ result = PCI_ERS_RESULT_DISCONNECT;
+ } else {
+ pci_set_master(pdev);
+ pci_restore_state(pdev);
+ pci_save_state(pdev);
+
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+ pci_enable_wake(pdev, PCI_D3cold, 0);
+
+ /* In case of PCI error, adapter loses its HW address
+ * so we should re-assign it here.
+ */
+ hw->hw_addr = adapter->io_addr;
+
+ igc_reset(adapter);
+ wr32(IGC_WUS, ~0);
+ result = PCI_ERS_RESULT_RECOVERED;
+ }
+
+ return result;
+}
+
+/**
+ * igc_io_resume - called when traffic can start to flow again.
+ * @pdev: Pointer to PCI device
+ *
+ * This callback is called when the error recovery driver tells us that
+ * its OK to resume normal operation. Implementation resembles the
+ * second-half of the igc_resume routine.
+ */
+static void igc_io_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igc_adapter *adapter = netdev_priv(netdev);
+
+ rtnl_lock();
+ if (netif_running(netdev)) {
+ if (igc_open(netdev)) {
+ dev_err(&pdev->dev, "igc_open failed after reset\n");
+ return;
+ }
+ }
+
+ netif_device_attach(netdev);
+
+ /* let the f/w know that the h/w is now under the control of the
+ * driver.
+ */
+ igc_get_hw_control(adapter);
+ rtnl_unlock();
+}
+
+static const struct pci_error_handlers igc_err_handler = {
+ .error_detected = igc_io_error_detected,
+ .slot_reset = igc_io_slot_reset,
+ .resume = igc_io_resume,
+};
+
#ifdef CONFIG_PM
static const struct dev_pm_ops igc_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(igc_suspend, igc_resume)
@@ -5093,6 +5195,7 @@ static struct pci_driver igc_driver = {
.driver.pm = &igc_pm_ops,
#endif
.shutdown = igc_shutdown,
+ .err_handler = &igc_err_handler,
};
/**
Add pcie error detection, slot reset and resume capability v1->v2: Address community comments Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> --- drivers/net/ethernet/intel/igc/igc_main.c | 103 ++++++++++++++++++++++++++++++ 1 file changed, 103 insertions(+)