@@ -1516,8 +1516,17 @@ static int e1000_set_es2lan_mac_loopback(struct e1000_adapter *adapter)
static int e1000_setup_loopback_test(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
- u32 rctl;
+ u32 rctl, fext_nvm11, tarc0;
+ if (hw->mac.type == e1000_pch_spt) {
+ fext_nvm11 = er32(FEXTNVM11);
+ fext_nvm11 |= E1000_FEXTNVM11_DISABLE_MULR_FIX;
+ ew32(FEXTNVM11, fext_nvm11);
+ tarc0 = er32(TARC(0));
+ tarc0 &= 0xcfffffff;
+ tarc0 |= 0x20000000;
+ ew32(TARC(0), tarc0);
+ }
if (hw->phy.media_type == e1000_media_type_fiber ||
hw->phy.media_type == e1000_media_type_internal_serdes) {
switch (hw->mac.type) {
@@ -1542,7 +1551,7 @@ static int e1000_setup_loopback_test(struct e1000_adapter *adapter)
static void e1000_loopback_cleanup(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
- u32 rctl;
+ u32 rctl, fext_nvm11, tarc0;
u16 phy_reg;
rctl = er32(RCTL);
@@ -1550,6 +1559,14 @@ static void e1000_loopback_cleanup(struct e1000_adapter *adapter)
ew32(RCTL, rctl);
switch (hw->mac.type) {
+ case e1000_pch_spt:
+ fext_nvm11 = er32(FEXTNVM11);
+ fext_nvm11 &= ~E1000_FEXTNVM11_DISABLE_MULR_FIX;
+ ew32(FEXTNVM11, fext_nvm11);
+ tarc0 = er32(TARC(0));
+ tarc0 &= 0xcfffffff;
+ ew32(TARC(0), tarc0);
+ /* fall through */
case e1000_80003es2lan:
if (hw->phy.media_type == e1000_media_type_fiber ||
hw->phy.media_type == e1000_media_type_internal_serdes) {
system would hang during execution of "ethtool -t <NIC>" for the same reason that required flushing the descriptor rings. this fix disables MULR for the loopback test to avoid the hang state. Signed-off-by: Yanir Lubetkin <yanirx.lubetkin@intel.com> --- drivers/net/ethernet/intel/e1000e/ethtool.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-)