@@ -15,6 +15,7 @@ from tshark import run_tshark
from test_gas import hs20_ap_params
from test_dpp import check_dpp_capab, wait_auth_success
from test_rrm import build_beacon_request, run_req_beacon, BeaconReport
+import tempfile
def eht_verify_wifi_version(dev):
status = dev.get_status()
@@ -1823,3 +1824,232 @@ def test_eht_mlo_csa(dev, apdev):
traffic_test(wpas, hapd0)
#TODO: CSA on non-first link
+
+def create_base_conf_file(iface, channel, prefix='hostapd-', hw_mode='g',
+ op_class=None):
+ # Create configuration file and add phy characteristics
+ fd, fname = tempfile.mkstemp(dir='/tmp',
+ prefix=prefix + iface + "-chan-" + str(channel) + "-")
+ f = os.fdopen(fd, 'w')
+
+ f.write("driver=nl80211\n")
+ f.write("hw_mode=" + str(hw_mode) + "\n")
+ f.write("ieee80211n=1\n")
+ if hw_mode == 'a' and \
+ (op_class is None or \
+ op_class not in [131, 132, 133, 134, 135, 136, 137]):
+ f.write("ieee80211ac=1\n")
+ f.write("ieee80211ax=1\n")
+ f.write("ieee80211be=1\n")
+ f.write("channel=" + str(channel) + "\n")
+
+ return f, fname
+
+def append_bss_conf_to_file(f, ifname, params, first=False):
+ # Add BSS specific characteristics
+ config = "bss"
+
+ if first:
+ config = "interface"
+
+ f.write("\n" + config + "=%s\n" % ifname)
+
+ for k, v in list(params.items()):
+ f.write("{}={}\n".format(k,v))
+
+ f.write("mld_ap=1\n")
+
+def dump_config(fname):
+ with open(fname, 'r') as f:
+ cfg = f.read()
+ logger.debug("hostapd config: " + str(fname) + "\n" + cfg)
+
+def get_config(iface, count, ssid, passphrase, channel, bssid_regex,
+ rnr=False, debug=False):
+ f, fname = create_base_conf_file(iface, channel=channel)
+ hapds = []
+
+ for i in range(count):
+ if i == 0:
+ ifname = iface
+ else:
+ ifname = iface + "-" + str(i)
+
+ set_ssid = ssid + str(i)
+ set_passphrase = passphrase + str(i)
+ params = hostapd.wpa2_params(ssid=set_ssid, passphrase=set_passphrase,
+ wpa_key_mgmt="SAE", ieee80211w="2")
+ params['sae_pwe'] = "2"
+ params['group_mgmt_cipher'] = "AES-128-CMAC"
+ params['beacon_prot'] = "1"
+ params["ctrl_interface"] = "/var/run/hostapd/chan_" + str(channel)
+ params["bssid"] = bssid_regex % (i + 1)
+
+ if rnr:
+ params["rnr"]="1"
+
+ append_bss_conf_to_file(f, ifname, params, first=(i == 0))
+
+ hapds.append([ifname, params["ctrl_interface"], i])
+
+ f.close()
+
+ if debug:
+ dump_config(fname)
+
+ return fname, hapds
+
+def start_ap(prefix, configs):
+ pid = prefix + ".hostapd.pid"
+ configs = configs.split()
+
+ cmd = ['../../hostapd/hostapd', '-ddKtB', '-P', pid, '-f',
+ prefix + ".hostapd-log"]
+
+ cmd = cmd + configs
+
+ logger.info("Starting APs")
+ res = subprocess.check_call(cmd)
+ if res != 0:
+ raise Exception("Could not start hostapd: %s" % str(res))
+
+ # Wait for hostapd to complete initialization and daemonize.
+ time.sleep(2)
+
+ if not os.path.exists(pid):
+ raise Exception("hostapd did not create PID file.")
+
+def get_mld_devs(hapd_iface, count, prefix, rnr=False):
+ fname1, hapds1 = get_config(hapd_iface, count=count, ssid="mld-",
+ passphrase="qwertyuiop-", channel=1,
+ bssid_regex="02:00:00:00:07:%02x",
+ rnr=rnr, debug=True)
+ fname2, hapds2 = get_config(hapd_iface, count=count, ssid="mld-",
+ passphrase="qwertyuiop-", channel=6,
+ bssid_regex="02:00:00:00:08:%02x",
+ rnr=rnr, debug=True)
+
+ start_ap(prefix, fname1 + " " + fname2)
+
+ hapd_mld1_link0 = hostapd.Hostapd(ifname=hapds1[0][0], ctrl=hapds1[0][1],
+ bssidx=hapds1[0][2])
+ hapd_mld1_link1 = hostapd.Hostapd(ifname=hapds2[0][0], ctrl=hapds2[0][1],
+ bssidx=hapds2[0][2])
+
+ hapd_mld2_link0 = hostapd.Hostapd(ifname=hapds1[1][0], ctrl=hapds1[1][1],
+ bssidx=hapds1[1][2])
+ hapd_mld2_link1 = hostapd.Hostapd(ifname=hapds2[1][0], ctrl=hapds2[1][1],
+ bssidx=hapds2[1][2])
+
+ if not hapd_mld1_link0.ping():
+ raise Exception("Could not ping hostapd")
+
+ if not hapd_mld1_link1.ping():
+ raise Exception("Could not ping hostapd")
+
+ if not hapd_mld2_link0.ping():
+ raise Exception("Could not ping hostapd")
+
+ if not hapd_mld2_link1.ping():
+ raise Exception("Could not ping hostapd")
+
+ os.remove(fname1)
+ os.remove(fname2)
+
+ return [hapd_mld1_link0, hapd_mld1_link1, hapd_mld2_link0, hapd_mld2_link1]
+
+def stop_mld_devs(hapds, pid):
+ pid = pid + ".hostapd.pid"
+
+ if "OK" not in hapds[0].request("TERMINATE"):
+ raise Exception("Failed to terminate hostapd process")
+
+ ev = hapds[0].wait_event(["CTRL-EVENT-TERMINATING"], timeout=15)
+ if ev is None:
+ raise Exception("CTRL-EVENT-TERMINATING not seen")
+
+ time.sleep(0.5)
+
+ if os.path.exists(pid):
+ raise Exception("PID file exits after process termination")
+
+def eht_parse_rnr(bss, rnr=False, exp_bssid=None):
+ partner_rnr_pattern = re.compile(".*ap_info.*, mld ID=0, link ID=",
+ re.MULTILINE)
+ ml_pattern = re.compile(".*multi-link:.*, MLD addr=.*", re.MULTILINE)
+
+ if partner_rnr_pattern.search(bss) is None:
+ raise Exception("RNR element not found for first link of first MLD")
+
+ if ml_pattern.search(bss) is None:
+ raise Exception("ML element not found for first link of first MLD")
+
+ if not rnr:
+ return
+
+ coloc_rnr_pattern = re.compile(".*ap_info.*, mld ID=255, link ID=..",
+ re.MULTILINE)
+
+ if coloc_rnr_pattern.search(bss) is None:
+ raise Exception("RNR element not found for co-located BSS")
+
+ line = coloc_rnr_pattern.search(bss).group()
+ if line.count('bssid') > 1:
+ raise Exception("More than one BSS found for co-located RNR")
+
+ # Get the BSSID carried in the RNR
+ index = line.rindex('bssid')
+ bssid = line[index+len('bssid')+1:].split(',')[0]
+
+ # Get the MLD ID carried in the RNR
+ index = line.rindex('link ID')
+ link_id = line[index+len('link ID')+1:].split(',')[0]
+
+ if link_id != "15":
+ raise Exception("Unexpected link ID for co-located BSS which is not own partner")
+
+ if bssid != exp_bssid:
+ raise Exception("Unexpected BSSID for co-located BSS")
+
+def eht_mld_cohosted_discovery(dev, apdev, params, rnr=False):
+ with HWSimRadio(use_mlo=True, n_channels=2) as (hapd_radio, hapd_iface), \
+ HWSimRadio(use_mlo=True) as (wpas_radio, wpas_iface):
+
+ wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
+ wpas.interface_add(wpas_iface)
+
+ hapds = get_mld_devs(hapd_iface=hapd_iface, count=2, prefix=params['prefix'],
+ rnr=rnr)
+
+ # Only scan link 0
+ res = wpas.request("SCAN freq=2412")
+ if "FAIL" in res:
+ raise Exception("Failed to start scan")
+
+ ev = wpas.wait_event(["CTRL-EVENT-SCAN-STARTED"])
+ if ev is None:
+ raise Exception("Scan did not start")
+
+ ev = wpas.wait_event(["CTRL-EVENT-SCAN-RESULTS"])
+ if ev is None:
+ raise Exception("Scan did not complete")
+
+ logger.info("Scan done")
+
+ bss = wpas.request("BSS " + hapds[0].own_addr())
+ logger.info("BSS 0_0: " + str(bss))
+ eht_parse_rnr(bss, rnr, hapds[2].own_addr())
+
+ bss = wpas.request("BSS " + hapds[2].own_addr())
+ logger.info("BSS 1_0: " + str(bss))
+ eht_parse_rnr(bss, rnr, hapds[0].own_addr())
+
+ stop_mld_devs(hapds, params['prefix'])
+
+def test_eht_mld_cohosted_discovery(dev, apdev, params):
+ """EHT 2 AP MLDs discovery"""
+ eht_mld_cohosted_discovery(dev, apdev, params)
+
+def test_eht_mld_cohosted_discovery_with_rnr(dev, apdev, params):
+ """EHT 2 AP MLDs discovery (with co-location RNR)"""
+ eht_mld_cohosted_discovery(dev, apdev, params, rnr=True)
Add test case to test basic cohosted MLDs functionality. Add helper functions to create the configuration file, start hostapd instance. Client connectivty test case will be added via a subsequent change. eht_mld_cohosted_discovery: 2 co-hosted MLDs without non-MLD RNR. Basic bring up and beacon, MLD RNR, scan validation. eht_mld_cohosted_discovery_with_rnr: Same like eht_mld_cohosted_discovery but additionally non-MLD RNR (rnr=1) is also enabled. Validate the non-MLD RNR as well. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> --- tests/hwsim/test_eht.py | 230 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 230 insertions(+)