| Message ID | 1476387924-4509-1-git-send-email-adhemerval.zanella@linaro.org |
|---|---|
| State | New |
| Headers | show |
Ping. On 13/10/2016 16:45, Adhemerval Zanella wrote: > This patch remove the PID cache and usage in current GLIBC code. Current > usage is mainly used for performance optimization to avoid the syscall, > however it adds some issues: > > - The exposed clone syscall will try to set pid/tid to make the new > thread somewhat compatible with current GLIBC assumptions. This cause > a set of issue with new workloads and usercases (such as BZ#17214 and > [1]) as well for new internal usage of clone to optimize other algorithms > (such as clone plus CLONE_VM for posix_spawn, BZ#19957). > > - The caching complexity also added some bugs in the past [2] [3] and > requires more effort of each port to handle such requirements (for > both clone and vfork implementation). > > - Caching performance gain in mainly or getpid and some specific > code paths. The getpid performance leverage is questionable [4], > either by the idea of getpid being a hotspot as for the getpid > implementation itself (if it is indeed a justifiable hotspot a > vDSO symbol could let to a much more simpler solution). > > Other usage is mainly for non usual code paths, such as pthread > cancellation signal and handling. > > For thread creation (on atack allocation) the code simplification in fact > adds some performance gain due the no need of transverse the stack > cache and invalidate each element pid. > > Other thread usages will require a direct getpid syscall, such as > cancellation/setxid signal, thread cancellation, thread fail path > (at create_thread), and thread signal (pthread_kill and > pthread_sigqueue). However these are hardly usual hotspots and I > think adding a syscall is justifiable. > > It also simplifies both the clone and vfork arch-specific implementation. > And by review each fork implementation there are some discrepancies that > this patch also solves: > > - microblaze clone/vfork does not set/reset the pid/tid field > - hppa uses the default vfork implementation that fallback to fork. > Since vfork is deprecated I do not think we should bother with it. > > The patch also removes the TID caching in clone. My understanding for > such semantic is try provide some pthread usage after a user program > issue clone directly (as done by thread creation with CLONE_PARENT_SETTID > and pthread tid member). However, as stated before in multiple threads, > GLIBC provides clone syscalls without futher supporting all this > semantics. It means that, although GLIBC currently tries a better effort, > since it does not make any more guarantees, specially for newer and newer > clone flags. > > I ran a full make check on x86_64, x32, i686, armhf, aarch64, and powerpc64le. > For sparc32, sparc64, and mips I ran the basic fork and vfork tests from > posix/ folder (on a qemu system). So it would require further testing > on alpha, hppa, ia64, m68k, nios2, s390, sh, and tile (I excluded microblaze > because it is already implementing the patch semantic regarding clone/vfork). > > [1] https://codereview.chromium.org/800183004/ > [2] https://sourceware.org/ml/libc-alpha/2006-07/msg00123.html > [3] https://sourceware.org/bugzilla/show_bug.cgi?id=15368 > [4] http://yarchive.net/comp/linux/getpid_caching.html > > * sysdeps/nptl/fork.c (__libc_fork): Remove pid cache setting. > * nptl/allocatestack.c (allocate_stack): Likewise. > (__reclaim_stacks): Likewise. > (setxid_signal_thread): Obtain pid through syscall. > * nptl/nptl-init.c (sigcancel_handler): Likewise. > (sighandle_setxid): Likewise. > * nptl/pthread_cancel.c (pthread_cancel): Likewise. > * sysdeps/unix/sysv/linux/pthread_kill.c (__pthread_kill): Likewise. > * sysdeps/unix/sysv/linux/pthread_sigqueue.c (pthread_sigqueue): > Likewise. > * sysdeps/unix/sysv/linux/createthread.c (create_thread): Likewise. > * sysdeps/unix/sysv/linux/getpid.c: Likewise. > * nptl/descr.h (struct pthread): Change comment about pid value. > * nptl/pthread_getattr_np.c (pthread_getattr_np): Remove thread > pid assert. > * sysdeps/unix/sysv/linux/pthread-pids.h (__pthread_initialize_pids): > Do not set pid value. > * nptl_db/td_ta_thr_iter.c (iterate_thread_list): Remove thread > pid cache check. > * nptl_db/td_thr_validate.c (td_thr_validate): Likewise. > * sysdeps/aarch64/nptl/tcb-offsets.sym: Remove pid offset. > * sysdeps/alpha/nptl/tcb-offsets.sym: Likewise. > * sysdeps/arm/nptl/tcb-offsets.sym: Likewise. > * sysdeps/hppa/nptl/tcb-offsets.sym: Likewise. > * sysdeps/i386/nptl/tcb-offsets.sym: Likewise. > * sysdeps/ia64/nptl/tcb-offsets.sym: Likewise. > * sysdeps/m68k/nptl/tcb-offsets.sym: Likewise. > * sysdeps/microblaze/nptl/tcb-offsets.sym: Likewise. > * sysdeps/mips/nptl/tcb-offsets.sym: Likewise. > * sysdeps/nios2/nptl/tcb-offsets.sym: Likewise. > * sysdeps/powerpc/nptl/tcb-offsets.sym: Likewise. > * sysdeps/s390/nptl/tcb-offsets.sym: Likewise. > * sysdeps/sh/nptl/tcb-offsets.sym: Likewise. > * sysdeps/sparc/nptl/tcb-offsets.sym: Likewise. > * sysdeps/tile/nptl/tcb-offsets.sym: Likewise. > * sysdeps/x86_64/nptl/tcb-offsets.sym: Likewise. > * sysdeps/unix/sysv/linux/aarch64/clone.S: Remove pid and tid caching. > * sysdeps/unix/sysv/linux/alpha/clone.S: Likewise. > * sysdeps/unix/sysv/linux/arm/clone.S: Likewise. > * sysdeps/unix/sysv/linux/hppa/clone.S: Likewise. > * sysdeps/unix/sysv/linux/i386/clone.S: Likewise. > * sysdeps/unix/sysv/linux/ia64/clone2.S: Likewise. > * sysdeps/unix/sysv/linux/mips/clone.S: Likewise. > * sysdeps/unix/sysv/linux/nios2/clone.S: Likewise. > * sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S: Likewise. > * sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S: Likewise. > * sysdeps/unix/sysv/linux/s390/s390-32/clone.S: Likewise. > * sysdeps/unix/sysv/linux/s390/s390-64/clone.S: Likewise. > * sysdeps/unix/sysv/linux/sh/clone.S: Likewise. > * sysdeps/unix/sysv/linux/sparc/sparc32/clone.S: Likewise. > * sysdeps/unix/sysv/linux/sparc/sparc64/clone.S: Likewise. > * sysdeps/unix/sysv/linux/tile/clone.S: Likewise. > * sysdeps/unix/sysv/linux/x86_64/clone.S: Likewise. > * sysdeps/unix/sysv/linux/aarch64/vfork.S: Remove pid set and reset. > * sysdeps/unix/sysv/linux/alpha/vfork.S: Likewise. > * sysdeps/unix/sysv/linux/arm/vfork.S: Likewise. > * sysdeps/unix/sysv/linux/i386/vfork.S: Likewise. > * sysdeps/unix/sysv/linux/ia64/vfork.S: Likewise. > * sysdeps/unix/sysv/linux/m68k/clone.S: Likewise. > * sysdeps/unix/sysv/linux/m68k/vfork.S: Likewise. > * sysdeps/unix/sysv/linux/mips/vfork.S: Likewise. > * sysdeps/unix/sysv/linux/nios2/vfork.S: Likewise. > * sysdeps/unix/sysv/linux/powerpc/powerpc32/vfork.S: Likewise. > * sysdeps/unix/sysv/linux/powerpc/powerpc64/vfork.S: Likewise. > * sysdeps/unix/sysv/linux/s390/s390-32/vfork.S: Likewise. > * sysdeps/unix/sysv/linux/s390/s390-64/vfork.S: Likewise. > * sysdeps/unix/sysv/linux/sh/vfork.S: Likewise. > * sysdeps/unix/sysv/linux/sparc/sparc32/vfork.S: Likewise. > * sysdeps/unix/sysv/linux/sparc/sparc64/vfork.S: Likewise. > * sysdeps/unix/sysv/linux/tile/vfork.S: Likewise. > * sysdeps/unix/sysv/linux/x86_64/vfork.S: Likewise. > * sysdeps/unix/sysv/linux/tst-clone2.c (f): Remove direct pthread > struct access. > (clone_test): Remove function. > (do_test): Rewrite to take in consideration pid is not cached anymore. > --- > ChangeLog | 78 ++++++++++++++++ > nptl/allocatestack.c | 20 +--- > nptl/descr.h | 2 +- > nptl/nptl-init.c | 15 +-- > nptl/pthread_cancel.c | 18 +--- > nptl/pthread_getattr_np.c | 1 - > nptl_db/td_ta_thr_iter.c | 56 ++++------- > nptl_db/td_thr_validate.c | 23 ----- > sysdeps/aarch64/nptl/tcb-offsets.sym | 1 - > sysdeps/alpha/nptl/tcb-offsets.sym | 1 - > sysdeps/arm/nptl/tcb-offsets.sym | 1 - > sysdeps/hppa/nptl/tcb-offsets.sym | 1 - > sysdeps/i386/nptl/tcb-offsets.sym | 1 - > sysdeps/ia64/nptl/tcb-offsets.sym | 1 - > sysdeps/m68k/nptl/tcb-offsets.sym | 1 - > sysdeps/microblaze/nptl/tcb-offsets.sym | 1 - > sysdeps/mips/nptl/tcb-offsets.sym | 1 - > sysdeps/nios2/nptl/tcb-offsets.sym | 1 - > sysdeps/nptl/fork.c | 14 --- > sysdeps/powerpc/nptl/tcb-offsets.sym | 1 - > sysdeps/s390/nptl/tcb-offsets.sym | 1 - > sysdeps/sh/nptl/tcb-offsets.sym | 1 - > sysdeps/sparc/nptl/tcb-offsets.sym | 1 - > sysdeps/tile/nptl/tcb-offsets.sym | 1 - > sysdeps/unix/sysv/linux/aarch64/clone.S | 10 -- > sysdeps/unix/sysv/linux/aarch64/vfork.S | 17 ---- > sysdeps/unix/sysv/linux/alpha/clone.S | 16 ---- > sysdeps/unix/sysv/linux/alpha/vfork.S | 15 --- > sysdeps/unix/sysv/linux/arm/clone.S | 10 -- > sysdeps/unix/sysv/linux/arm/vfork.S | 15 --- > sysdeps/unix/sysv/linux/createthread.c | 6 +- > sysdeps/unix/sysv/linux/getpid.c | 34 +------ > sysdeps/unix/sysv/linux/hppa/clone.S | 12 --- > sysdeps/unix/sysv/linux/i386/clone.S | 15 --- > sysdeps/unix/sysv/linux/i386/vfork.S | 19 ---- > sysdeps/unix/sysv/linux/ia64/clone2.S | 14 +-- > sysdeps/unix/sysv/linux/ia64/vfork.S | 20 ---- > sysdeps/unix/sysv/linux/m68k/clone.S | 13 --- > sysdeps/unix/sysv/linux/m68k/vfork.S | 20 ---- > sysdeps/unix/sysv/linux/mips/clone.S | 13 --- > sysdeps/unix/sysv/linux/mips/vfork.S | 19 ---- > sysdeps/unix/sysv/linux/nios2/clone.S | 8 -- > sysdeps/unix/sysv/linux/nios2/vfork.S | 10 -- > sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S | 9 -- > sysdeps/unix/sysv/linux/powerpc/powerpc32/vfork.S | 26 ------ > sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S | 9 -- > sysdeps/unix/sysv/linux/powerpc/powerpc64/vfork.S | 23 ----- > sysdeps/unix/sysv/linux/pthread-pids.h | 2 +- > sysdeps/unix/sysv/linux/pthread_kill.c | 6 +- > sysdeps/unix/sysv/linux/pthread_sigqueue.c | 9 +- > sysdeps/unix/sysv/linux/s390/s390-32/clone.S | 7 -- > sysdeps/unix/sysv/linux/s390/s390-32/vfork.S | 12 --- > sysdeps/unix/sysv/linux/s390/s390-64/clone.S | 9 -- > sysdeps/unix/sysv/linux/s390/s390-64/vfork.S | 13 --- > sysdeps/unix/sysv/linux/sh/clone.S | 18 +--- > sysdeps/unix/sysv/linux/sh/vfork.S | 19 ---- > sysdeps/unix/sysv/linux/sparc/sparc32/clone.S | 7 -- > sysdeps/unix/sysv/linux/sparc/sparc32/vfork.S | 10 -- > sysdeps/unix/sysv/linux/sparc/sparc64/clone.S | 7 -- > sysdeps/unix/sysv/linux/sparc/sparc64/vfork.S | 10 -- > sysdeps/unix/sysv/linux/tile/clone.S | 16 ---- > sysdeps/unix/sysv/linux/tile/vfork.S | 28 ------ > sysdeps/unix/sysv/linux/tst-clone2.c | 107 ++++++++-------------- > sysdeps/unix/sysv/linux/x86_64/clone.S | 8 -- > sysdeps/unix/sysv/linux/x86_64/vfork.S | 18 ---- > sysdeps/x86_64/nptl/tcb-offsets.sym | 1 - > 66 files changed, 162 insertions(+), 740 deletions(-) > > diff --git a/nptl/allocatestack.c b/nptl/allocatestack.c > index 3016a2e..98a0ea2 100644 > --- a/nptl/allocatestack.c > +++ b/nptl/allocatestack.c > @@ -438,9 +438,6 @@ allocate_stack (const struct pthread_attr *attr, struct pthread **pdp, > SETUP_THREAD_SYSINFO (pd); > #endif > > - /* The process ID is also the same as that of the caller. */ > - pd->pid = THREAD_GETMEM (THREAD_SELF, pid); > - > /* Don't allow setxid until cloned. */ > pd->setxid_futex = -1; > > @@ -577,9 +574,6 @@ allocate_stack (const struct pthread_attr *attr, struct pthread **pdp, > /* Don't allow setxid until cloned. */ > pd->setxid_futex = -1; > > - /* The process ID is also the same as that of the caller. */ > - pd->pid = THREAD_GETMEM (THREAD_SELF, pid); > - > /* Allocate the DTV for this thread. */ > if (_dl_allocate_tls (TLS_TPADJ (pd)) == NULL) > { > @@ -873,9 +867,6 @@ __reclaim_stacks (void) > /* This marks the stack as free. */ > curp->tid = 0; > > - /* The PID field must be initialized for the new process. */ > - curp->pid = self->pid; > - > /* Account for the size of the stack. */ > stack_cache_actsize += curp->stackblock_size; > > @@ -901,13 +892,6 @@ __reclaim_stacks (void) > } > } > > - /* Reset the PIDs in any cached stacks. */ > - list_for_each (runp, &stack_cache) > - { > - struct pthread *curp = list_entry (runp, struct pthread, list); > - curp->pid = self->pid; > - } > - > /* Add the stack of all running threads to the cache. */ > list_splice (&stack_used, &stack_cache); > > @@ -1052,9 +1036,9 @@ setxid_signal_thread (struct xid_command *cmdp, struct pthread *t) > return 0; > > int val; > + pid_t pid = __getpid (); > INTERNAL_SYSCALL_DECL (err); > - val = INTERNAL_SYSCALL (tgkill, err, 3, THREAD_GETMEM (THREAD_SELF, pid), > - t->tid, SIGSETXID); > + val = INTERNAL_SYSCALL_CALL (tgkill, err, pid, t->tid, SIGSETXID); > > /* If this failed, it must have had not started yet or else exited. */ > if (!INTERNAL_SYSCALL_ERROR_P (val, err)) > diff --git a/nptl/descr.h b/nptl/descr.h > index 8e4938d..17a2c9f 100644 > --- a/nptl/descr.h > +++ b/nptl/descr.h > @@ -167,7 +167,7 @@ struct pthread > therefore stack) used' flag. */ > pid_t tid; > > - /* Process ID - thread group ID in kernel speak. */ > + /* Ununsed. */ > pid_t pid; > > /* List of robust mutexes the thread is holding. */ > diff --git a/nptl/nptl-init.c b/nptl/nptl-init.c > index bdbdfed..48fab50 100644 > --- a/nptl/nptl-init.c > +++ b/nptl/nptl-init.c > @@ -184,18 +184,12 @@ __nptl_set_robust (struct pthread *self) > static void > sigcancel_handler (int sig, siginfo_t *si, void *ctx) > { > - /* Determine the process ID. It might be negative if the thread is > - in the middle of a fork() call. */ > - pid_t pid = THREAD_GETMEM (THREAD_SELF, pid); > - if (__glibc_unlikely (pid < 0)) > - pid = -pid; > - > /* Safety check. It would be possible to call this function for > other signals and send a signal from another process. This is not > correct and might even be a security problem. Try to catch as > many incorrect invocations as possible. */ > if (sig != SIGCANCEL > - || si->si_pid != pid > + || si->si_pid != __getpid() > || si->si_code != SI_TKILL) > return; > > @@ -243,19 +237,14 @@ struct xid_command *__xidcmd attribute_hidden; > static void > sighandler_setxid (int sig, siginfo_t *si, void *ctx) > { > - /* Determine the process ID. It might be negative if the thread is > - in the middle of a fork() call. */ > - pid_t pid = THREAD_GETMEM (THREAD_SELF, pid); > int result; > - if (__glibc_unlikely (pid < 0)) > - pid = -pid; > > /* Safety check. It would be possible to call this function for > other signals and send a signal from another process. This is not > correct and might even be a security problem. Try to catch as > many incorrect invocations as possible. */ > if (sig != SIGSETXID > - || si->si_pid != pid > + || si->si_pid != __getpid () > || si->si_code != SI_TKILL) > return; > > diff --git a/nptl/pthread_cancel.c b/nptl/pthread_cancel.c > index 1419baf..89d02e1 100644 > --- a/nptl/pthread_cancel.c > +++ b/nptl/pthread_cancel.c > @@ -22,7 +22,7 @@ > #include "pthreadP.h" > #include <atomic.h> > #include <sysdep.h> > - > +#include <unistd.h> > > int > pthread_cancel (pthread_t th) > @@ -66,19 +66,11 @@ pthread_cancel (pthread_t th) > #ifdef SIGCANCEL > /* The cancellation handler will take care of marking the > thread as canceled. */ > - INTERNAL_SYSCALL_DECL (err); > - > - /* One comment: The PID field in the TCB can temporarily be > - changed (in fork). But this must not affect this code > - here. Since this function would have to be called while > - the thread is executing fork, it would have to happen in > - a signal handler. But this is no allowed, pthread_cancel > - is not guaranteed to be async-safe. */ > - int val; > - val = INTERNAL_SYSCALL (tgkill, err, 3, > - THREAD_GETMEM (THREAD_SELF, pid), pd->tid, > - SIGCANCEL); > + pid_t pid = getpid (); > > + INTERNAL_SYSCALL_DECL (err); > + int val = INTERNAL_SYSCALL_CALL (tgkill, err, pid, pd->tid, > + SIGCANCEL); > if (INTERNAL_SYSCALL_ERROR_P (val, err)) > result = INTERNAL_SYSCALL_ERRNO (val, err); > #else > diff --git a/nptl/pthread_getattr_np.c b/nptl/pthread_getattr_np.c > index fb906f0..32d7484 100644 > --- a/nptl/pthread_getattr_np.c > +++ b/nptl/pthread_getattr_np.c > @@ -68,7 +68,6 @@ pthread_getattr_np (pthread_t thread_id, pthread_attr_t *attr) > { > /* No stack information available. This must be for the initial > thread. Get the info in some magical way. */ > - assert (abs (thread->pid) == thread->tid); > > /* Stack size limit. */ > struct rlimit rl; > diff --git a/nptl_db/td_ta_thr_iter.c b/nptl_db/td_ta_thr_iter.c > index a990fed..9e50599 100644 > --- a/nptl_db/td_ta_thr_iter.c > +++ b/nptl_db/td_ta_thr_iter.c > @@ -76,48 +76,28 @@ iterate_thread_list (td_thragent_t *ta, td_thr_iter_f *callback, > if (ps_pdread (ta->ph, addr, copy, ta->ta_sizeof_pthread) != PS_OK) > return TD_ERR; > > - /* Verify that this thread's pid field matches the child PID. > - If its pid field is negative, it's about to do a fork or it > - is the sole thread in a fork child. */ > - psaddr_t pid; > - err = DB_GET_FIELD_LOCAL (pid, ta, copy, pthread, pid, 0); > - if (err == TD_OK && (pid_t) (uintptr_t) pid < 0) > - { > - if (-(pid_t) (uintptr_t) pid == match_pid) > - /* It is about to do a fork, but is really still the parent PID. */ > - pid = (psaddr_t) (uintptr_t) match_pid; > - else > - /* It must be a fork child, whose new PID is in the tid field. */ > - err = DB_GET_FIELD_LOCAL (pid, ta, copy, pthread, tid, 0); > - } > + err = DB_GET_FIELD_LOCAL (schedpolicy, ta, copy, pthread, > + schedpolicy, 0); > if (err != TD_OK) > break; > + err = DB_GET_FIELD_LOCAL (schedprio, ta, copy, pthread, > + schedparam_sched_priority, 0); > + if (err != TD_OK) > + break; > + > + /* Now test whether this thread matches the specified conditions. */ > > - if ((pid_t) (uintptr_t) pid == match_pid) > + /* Only if the priority level is as high or higher. */ > + int descr_pri = ((uintptr_t) schedpolicy == SCHED_OTHER > + ? 0 : (uintptr_t) schedprio); > + if (descr_pri >= ti_pri) > { > - err = DB_GET_FIELD_LOCAL (schedpolicy, ta, copy, pthread, > - schedpolicy, 0); > - if (err != TD_OK) > - break; > - err = DB_GET_FIELD_LOCAL (schedprio, ta, copy, pthread, > - schedparam_sched_priority, 0); > - if (err != TD_OK) > - break; > - > - /* Now test whether this thread matches the specified conditions. */ > - > - /* Only if the priority level is as high or higher. */ > - int descr_pri = ((uintptr_t) schedpolicy == SCHED_OTHER > - ? 0 : (uintptr_t) schedprio); > - if (descr_pri >= ti_pri) > - { > - /* Yep, it matches. Call the callback function. */ > - td_thrhandle_t th; > - th.th_ta_p = (td_thragent_t *) ta; > - th.th_unique = addr; > - if (callback (&th, cbdata_p) != 0) > - return TD_DBERR; > - } > + /* Yep, it matches. Call the callback function. */ > + td_thrhandle_t th; > + th.th_ta_p = (td_thragent_t *) ta; > + th.th_unique = addr; > + if (callback (&th, cbdata_p) != 0) > + return TD_DBERR; > } > > /* Get the pointer to the next element. */ > diff --git a/nptl_db/td_thr_validate.c b/nptl_db/td_thr_validate.c > index f3c8a7b..9b89fec 100644 > --- a/nptl_db/td_thr_validate.c > +++ b/nptl_db/td_thr_validate.c > @@ -80,28 +80,5 @@ td_thr_validate (const td_thrhandle_t *th) > err = TD_OK; > } > > - if (err == TD_OK) > - { > - /* Verify that this is not a stale element in a fork child. */ > - pid_t match_pid = ps_getpid (th->th_ta_p->ph); > - psaddr_t pid; > - err = DB_GET_FIELD (pid, th->th_ta_p, th->th_unique, pthread, pid, 0); > - if (err == TD_OK && (pid_t) (uintptr_t) pid < 0) > - { > - /* This was a thread that was about to fork, or it is the new sole > - thread in a fork child. In the latter case, its tid was stored > - via CLONE_CHILD_SETTID and so is already the proper child PID. */ > - if (-(pid_t) (uintptr_t) pid == match_pid) > - /* It is about to do a fork, but is really still the parent PID. */ > - pid = (psaddr_t) (uintptr_t) match_pid; > - else > - /* It must be a fork child, whose new PID is in the tid field. */ > - err = DB_GET_FIELD (pid, th->th_ta_p, th->th_unique, > - pthread, tid, 0); > - } > - if (err == TD_OK && (pid_t) (uintptr_t) pid != match_pid) > - err = TD_NOTHR; > - } > - > return err; > } > diff --git a/sysdeps/aarch64/nptl/tcb-offsets.sym b/sysdeps/aarch64/nptl/tcb-offsets.sym > index 0677aea..238647d 100644 > --- a/sysdeps/aarch64/nptl/tcb-offsets.sym > +++ b/sysdeps/aarch64/nptl/tcb-offsets.sym > @@ -2,6 +2,5 @@ > #include <tls.h> > > PTHREAD_MULTIPLE_THREADS_OFFSET offsetof (struct pthread, header.multiple_threads) > -PTHREAD_PID_OFFSET offsetof (struct pthread, pid) > PTHREAD_TID_OFFSET offsetof (struct pthread, tid) > PTHREAD_SIZEOF sizeof (struct pthread) > diff --git a/sysdeps/alpha/nptl/tcb-offsets.sym b/sysdeps/alpha/nptl/tcb-offsets.sym > index c21a791..1005621 100644 > --- a/sysdeps/alpha/nptl/tcb-offsets.sym > +++ b/sysdeps/alpha/nptl/tcb-offsets.sym > @@ -10,5 +10,4 @@ > #define thread_offsetof(mem) (long)(offsetof(struct pthread, mem) - sizeof(struct pthread)) > > MULTIPLE_THREADS_OFFSET thread_offsetof (header.multiple_threads) > -PID_OFFSET thread_offsetof (pid) > TID_OFFSET thread_offsetof (tid) > diff --git a/sysdeps/arm/nptl/tcb-offsets.sym b/sysdeps/arm/nptl/tcb-offsets.sym > index 92cc441..bf9c0a1 100644 > --- a/sysdeps/arm/nptl/tcb-offsets.sym > +++ b/sysdeps/arm/nptl/tcb-offsets.sym > @@ -7,5 +7,4 @@ > #define thread_offsetof(mem) (long)(offsetof(struct pthread, mem) - sizeof(struct pthread)) > > MULTIPLE_THREADS_OFFSET thread_offsetof (header.multiple_threads) > -PID_OFFSET thread_offsetof (pid) > TID_OFFSET thread_offsetof (tid) > diff --git a/sysdeps/hppa/nptl/tcb-offsets.sym b/sysdeps/hppa/nptl/tcb-offsets.sym > index c2f326e..6eeed4cb 100644 > --- a/sysdeps/hppa/nptl/tcb-offsets.sym > +++ b/sysdeps/hppa/nptl/tcb-offsets.sym > @@ -3,7 +3,6 @@ > > RESULT offsetof (struct pthread, result) > TID offsetof (struct pthread, tid) > -PID offsetof (struct pthread, pid) > CANCELHANDLING offsetof (struct pthread, cancelhandling) > CLEANUP_JMP_BUF offsetof (struct pthread, cleanup_jmp_buf) > MULTIPLE_THREADS_OFFSET offsetof (struct pthread, header.multiple_threads) > diff --git a/sysdeps/i386/nptl/tcb-offsets.sym b/sysdeps/i386/nptl/tcb-offsets.sym > index 7bdf161..695a810 100644 > --- a/sysdeps/i386/nptl/tcb-offsets.sym > +++ b/sysdeps/i386/nptl/tcb-offsets.sym > @@ -4,7 +4,6 @@ > > RESULT offsetof (struct pthread, result) > TID offsetof (struct pthread, tid) > -PID offsetof (struct pthread, pid) > CANCELHANDLING offsetof (struct pthread, cancelhandling) > CLEANUP_JMP_BUF offsetof (struct pthread, cleanup_jmp_buf) > MULTIPLE_THREADS_OFFSET offsetof (tcbhead_t, multiple_threads) > diff --git a/sysdeps/ia64/nptl/tcb-offsets.sym b/sysdeps/ia64/nptl/tcb-offsets.sym > index e1707ab..b01f712 100644 > --- a/sysdeps/ia64/nptl/tcb-offsets.sym > +++ b/sysdeps/ia64/nptl/tcb-offsets.sym > @@ -1,7 +1,6 @@ > #include <sysdep.h> > #include <tls.h> > > -PID offsetof (struct pthread, pid) - TLS_PRE_TCB_SIZE > TID offsetof (struct pthread, tid) - TLS_PRE_TCB_SIZE > MULTIPLE_THREADS_OFFSET offsetof (struct pthread, header.multiple_threads) - TLS_PRE_TCB_SIZE > SYSINFO_OFFSET offsetof (tcbhead_t, __private) > diff --git a/sysdeps/m68k/nptl/tcb-offsets.sym b/sysdeps/m68k/nptl/tcb-offsets.sym > index b1bba65..241fb8b 100644 > --- a/sysdeps/m68k/nptl/tcb-offsets.sym > +++ b/sysdeps/m68k/nptl/tcb-offsets.sym > @@ -7,5 +7,4 @@ > #define thread_offsetof(mem) (long)(offsetof(struct pthread, mem) - TLS_TCB_OFFSET - TLS_PRE_TCB_SIZE) > > MULTIPLE_THREADS_OFFSET thread_offsetof (header.multiple_threads) > -PID_OFFSET thread_offsetof (pid) > TID_OFFSET thread_offsetof (tid) > diff --git a/sysdeps/microblaze/nptl/tcb-offsets.sym b/sysdeps/microblaze/nptl/tcb-offsets.sym > index 18afbee..614f0df 100644 > --- a/sysdeps/microblaze/nptl/tcb-offsets.sym > +++ b/sysdeps/microblaze/nptl/tcb-offsets.sym > @@ -7,5 +7,4 @@ > #define thread_offsetof(mem) (long)(offsetof (struct pthread, mem) - sizeof (struct pthread)) > > MULTIPLE_THREADS_OFFSET thread_offsetof (header.multiple_threads) > -PID_OFFSET thread_offsetof (pid) > TID_OFFSET thread_offsetof (tid) > diff --git a/sysdeps/mips/nptl/tcb-offsets.sym b/sysdeps/mips/nptl/tcb-offsets.sym > index e0e71dc..9ea25b9 100644 > --- a/sysdeps/mips/nptl/tcb-offsets.sym > +++ b/sysdeps/mips/nptl/tcb-offsets.sym > @@ -7,5 +7,4 @@ > #define thread_offsetof(mem) (long)(offsetof(struct pthread, mem) - TLS_TCB_OFFSET - TLS_PRE_TCB_SIZE) > > MULTIPLE_THREADS_OFFSET thread_offsetof (header.multiple_threads) > -PID_OFFSET thread_offsetof (pid) > TID_OFFSET thread_offsetof (tid) > diff --git a/sysdeps/nios2/nptl/tcb-offsets.sym b/sysdeps/nios2/nptl/tcb-offsets.sym > index d9ae952..3cd8d98 100644 > --- a/sysdeps/nios2/nptl/tcb-offsets.sym > +++ b/sysdeps/nios2/nptl/tcb-offsets.sym > @@ -9,6 +9,5 @@ > # define thread_offsetof(mem) ((ptrdiff_t) THREAD_SELF + offsetof (struct pthread, mem)) > > MULTIPLE_THREADS_OFFSET thread_offsetof (header.multiple_threads) > -PID_OFFSET thread_offsetof (pid) > TID_OFFSET thread_offsetof (tid) > POINTER_GUARD (offsetof (tcbhead_t, pointer_guard) - TLS_TCB_OFFSET - sizeof (tcbhead_t)) > diff --git a/sysdeps/nptl/fork.c b/sysdeps/nptl/fork.c > index ea135f8..168b2ad 100644 > --- a/sysdeps/nptl/fork.c > +++ b/sysdeps/nptl/fork.c > @@ -135,12 +135,6 @@ __libc_fork (void) > pid_t ppid = THREAD_GETMEM (THREAD_SELF, tid); > #endif > > - /* We need to prevent the getpid() code to update the PID field so > - that, if a signal arrives in the child very early and the signal > - handler uses getpid(), the value returned is correct. */ > - pid_t parentpid = THREAD_GETMEM (THREAD_SELF, pid); > - THREAD_SETMEM (THREAD_SELF, pid, -parentpid); > - > #ifdef ARCH_FORK > pid = ARCH_FORK (); > #else > @@ -159,9 +153,6 @@ __libc_fork (void) > if (__fork_generation_pointer != NULL) > *__fork_generation_pointer += __PTHREAD_ONCE_FORK_GEN_INCR; > > - /* Adjust the PID field for the new process. */ > - THREAD_SETMEM (self, pid, THREAD_GETMEM (self, tid)); > - > #if HP_TIMING_AVAIL > /* The CPU clock of the thread and process have to be set to zero. */ > hp_timing_t now; > @@ -231,11 +222,6 @@ __libc_fork (void) > } > else > { > - assert (THREAD_GETMEM (THREAD_SELF, tid) == ppid); > - > - /* Restore the PID value. */ > - THREAD_SETMEM (THREAD_SELF, pid, parentpid); > - > /* Release acquired locks in the multi-threaded case. */ > if (multiple_threads) > { > diff --git a/sysdeps/powerpc/nptl/tcb-offsets.sym b/sysdeps/powerpc/nptl/tcb-offsets.sym > index f580e69..7c9fd33 100644 > --- a/sysdeps/powerpc/nptl/tcb-offsets.sym > +++ b/sysdeps/powerpc/nptl/tcb-offsets.sym > @@ -13,7 +13,6 @@ > #if TLS_MULTIPLE_THREADS_IN_TCB > MULTIPLE_THREADS_OFFSET thread_offsetof (header.multiple_threads) > #endif > -PID thread_offsetof (pid) > TID thread_offsetof (tid) > POINTER_GUARD (offsetof (tcbhead_t, pointer_guard) - TLS_TCB_OFFSET - sizeof (tcbhead_t)) > TAR_SAVE (offsetof (tcbhead_t, tar_save) - TLS_TCB_OFFSET - sizeof (tcbhead_t)) > diff --git a/sysdeps/s390/nptl/tcb-offsets.sym b/sysdeps/s390/nptl/tcb-offsets.sym > index 9cfae21..9c1c01f 100644 > --- a/sysdeps/s390/nptl/tcb-offsets.sym > +++ b/sysdeps/s390/nptl/tcb-offsets.sym > @@ -3,5 +3,4 @@ > > MULTIPLE_THREADS_OFFSET offsetof (tcbhead_t, multiple_threads) > STACK_GUARD offsetof (tcbhead_t, stack_guard) > -PID offsetof (struct pthread, pid) > TID offsetof (struct pthread, tid) > diff --git a/sysdeps/sh/nptl/tcb-offsets.sym b/sysdeps/sh/nptl/tcb-offsets.sym > index ac63b5b..4963e15 100644 > --- a/sysdeps/sh/nptl/tcb-offsets.sym > +++ b/sysdeps/sh/nptl/tcb-offsets.sym > @@ -4,7 +4,6 @@ > > RESULT offsetof (struct pthread, result) > TID offsetof (struct pthread, tid) > -PID offsetof (struct pthread, pid) > CANCELHANDLING offsetof (struct pthread, cancelhandling) > CLEANUP_JMP_BUF offsetof (struct pthread, cleanup_jmp_buf) > MULTIPLE_THREADS_OFFSET offsetof (struct pthread, header.multiple_threads) > diff --git a/sysdeps/sparc/nptl/tcb-offsets.sym b/sysdeps/sparc/nptl/tcb-offsets.sym > index 923af8a..f75d020 100644 > --- a/sysdeps/sparc/nptl/tcb-offsets.sym > +++ b/sysdeps/sparc/nptl/tcb-offsets.sym > @@ -3,5 +3,4 @@ > > MULTIPLE_THREADS_OFFSET offsetof (tcbhead_t, multiple_threads) > POINTER_GUARD offsetof (tcbhead_t, pointer_guard) > -PID offsetof (struct pthread, pid) > TID offsetof (struct pthread, tid) > diff --git a/sysdeps/tile/nptl/tcb-offsets.sym b/sysdeps/tile/nptl/tcb-offsets.sym > index 6740bc9..0147ffa 100644 > --- a/sysdeps/tile/nptl/tcb-offsets.sym > +++ b/sysdeps/tile/nptl/tcb-offsets.sym > @@ -9,7 +9,6 @@ > #define thread_offsetof(mem) (long)(offsetof(struct pthread, mem) - TLS_TCB_OFFSET - TLS_PRE_TCB_SIZE) > > MULTIPLE_THREADS_OFFSET thread_offsetof (header.multiple_threads) > -PID_OFFSET thread_offsetof (pid) > TID_OFFSET thread_offsetof (tid) > POINTER_GUARD (offsetof (tcbhead_t, pointer_guard) - TLS_TCB_OFFSET - sizeof (tcbhead_t)) > FEEDBACK_DATA_OFFSET (offsetof (tcbhead_t, feedback_data) - TLS_TCB_OFFSET - sizeof (tcbhead_t)) > diff --git a/sysdeps/unix/sysv/linux/aarch64/clone.S b/sysdeps/unix/sysv/linux/aarch64/clone.S > index 76baa7a..96482e5 100644 > --- a/sysdeps/unix/sysv/linux/aarch64/clone.S > +++ b/sysdeps/unix/sysv/linux/aarch64/clone.S > @@ -72,16 +72,6 @@ thread_start: > cfi_undefined (x30) > mov x29, 0 > > - tbnz x11, #CLONE_VM_BIT, 1f > - > - mov x8, #SYS_ify(getpid) > - svc 0x0 > - mrs x1, tpidr_el0 > - sub x1, x1, #PTHREAD_SIZEOF > - str w0, [x1, #PTHREAD_PID_OFFSET] > - str w0, [x1, #PTHREAD_TID_OFFSET] > -1: > - > /* Pick the function arg and execute. */ > mov x0, x12 > blr x10 > diff --git a/sysdeps/unix/sysv/linux/aarch64/vfork.S b/sysdeps/unix/sysv/linux/aarch64/vfork.S > index 577895e..aeed0b2 100644 > --- a/sysdeps/unix/sysv/linux/aarch64/vfork.S > +++ b/sysdeps/unix/sysv/linux/aarch64/vfork.S > @@ -27,27 +27,10 @@ > > ENTRY (__vfork) > > - /* Save the TCB-cached PID away in w3, and then negate the TCB > - field. But if it's zero, set it to 0x80000000 instead. See > - raise.c for the logic that relies on this value. */ > - mrs x2, tpidr_el0 > - sub x2, x2, #PTHREAD_SIZEOF > - ldr w3, [x2, #PTHREAD_PID_OFFSET] > - mov w1, #0x80000000 > - negs w0, w3 > - csel w0, w1, w0, eq > - str w0, [x2, #PTHREAD_PID_OFFSET] > - > mov x0, #0x4111 /* CLONE_VM | CLONE_VFORK | SIGCHLD */ > mov x1, sp > DO_CALL (clone, 2) > > - /* Restore the original value of the TCB cache of the PID, if we're > - the parent. But in the child (syscall return value equals zero), > - leave things as they are. */ > - cbz x0, 1f > - str w3, [x2, #PTHREAD_PID_OFFSET] > -1: > cmn x0, #4095 > b.cs .Lsyscall_error > RET > diff --git a/sysdeps/unix/sysv/linux/alpha/clone.S b/sysdeps/unix/sysv/linux/alpha/clone.S > index 6a3154f..2757bf2 100644 > --- a/sysdeps/unix/sysv/linux/alpha/clone.S > +++ b/sysdeps/unix/sysv/linux/alpha/clone.S > @@ -91,13 +91,6 @@ thread_start: > cfi_def_cfa_register(fp) > cfi_undefined(ra) > > - /* Check and see if we need to reset the PID. */ > - ldq t0, 16(sp) > - lda t1, CLONE_VM > - and t0, t1, t2 > - beq t2, 2f > -1: > - > /* Load up the arguments. */ > ldq pv, 0(sp) > ldq a0, 8(sp) > @@ -120,15 +113,6 @@ thread_start: > halt > > .align 4 > -2: > - rduniq > - mov v0, s0 > - lda v0, __NR_getxpid > - callsys > -3: > - stl v0, PID_OFFSET(s0) > - stl v0, TID_OFFSET(s0) > - br 1b > cfi_endproc > .end thread_start > > diff --git a/sysdeps/unix/sysv/linux/alpha/vfork.S b/sysdeps/unix/sysv/linux/alpha/vfork.S > index 9fc199a..e5f7ed0 100644 > --- a/sysdeps/unix/sysv/linux/alpha/vfork.S > +++ b/sysdeps/unix/sysv/linux/alpha/vfork.S > @@ -25,24 +25,9 @@ ENTRY(__libc_vfork) > rduniq > mov v0, a1 > > - /* Save the TCB-cached PID away in A2, and then negate the TCB > - field. But if it's zero, set it to 0x80000000 instead. See > - raise.c for the logic that relies on this value. */ > - ldl a2, PID_OFFSET(v0) > - ldah t0, -0x8000 > - negl a2, t1 > - cmovne a2, t1, t0 > - stl t0, PID_OFFSET(v0); > - > lda v0, SYS_ify(vfork) > call_pal PAL_callsys > > - /* Restore the original value of the TCB cache of the PID, if we're > - the parent. But in the child (syscall return value equals zero), > - leave things as they are. */ > - beq v0, 1f > - stl a2, PID_OFFSET(a1) > -1: > /* Normal error check and return. */ > bne a3, SYSCALL_ERROR_LABEL > ret > diff --git a/sysdeps/unix/sysv/linux/arm/clone.S b/sysdeps/unix/sysv/linux/arm/clone.S > index 7ff6818..4c6325d 100644 > --- a/sysdeps/unix/sysv/linux/arm/clone.S > +++ b/sysdeps/unix/sysv/linux/arm/clone.S > @@ -70,16 +70,6 @@ PSEUDO_END (__clone) > 1: > .fnstart > .cantunwind > - tst ip, #CLONE_VM > - bne 2f > - GET_TLS (lr) > - mov r1, r0 > - ldr r7, =SYS_ify(getpid) > - swi 0x0 > - NEGOFF_ADJ_BASE (r1, TID_OFFSET) > - str r0, NEGOFF_OFF1 (r1, TID_OFFSET) > - str r0, NEGOFF_OFF2 (r1, PID_OFFSET, TID_OFFSET) > -2: > @ pick the function arg and call address off the stack and execute > ldr r0, [sp, #4] > ldr ip, [sp], #8 > diff --git a/sysdeps/unix/sysv/linux/arm/vfork.S b/sysdeps/unix/sysv/linux/arm/vfork.S > index 500f5ca..794372e 100644 > --- a/sysdeps/unix/sysv/linux/arm/vfork.S > +++ b/sysdeps/unix/sysv/linux/arm/vfork.S > @@ -28,16 +28,6 @@ > and the process ID of the new process to the old process. */ > > ENTRY (__vfork) > - /* Save the PID value. */ > - GET_TLS (r2) > - NEGOFF_ADJ_BASE2 (r2, r0, PID_OFFSET) /* Save the TLS addr in r2. */ > - ldr r3, NEGOFF_OFF1 (r2, PID_OFFSET) /* Load the saved PID. */ > - rsbs r0, r3, #0 /* Negate it, and test for zero. */ > - /* Use 0x80000000 if it was 0. See raise.c for how this is used. */ > - it eq > - moveq r0, #0x80000000 > - str r0, NEGOFF_OFF1 (r2, PID_OFFSET) /* Store the temp PID. */ > - > /* The DO_CALL macro saves r7 on the stack, to enable generation > of ARM unwind info. Since the stack is initially shared between > parent and child of vfork, that saved value could be corrupted. > @@ -57,11 +47,6 @@ ENTRY (__vfork) > mov r7, ip > cfi_restore (r7) > > - /* Restore the old PID value in the parent. */ > - cmp r0, #0 /* If we are the parent... */ > - it ne > - strne r3, NEGOFF_OFF1 (r2, PID_OFFSET) /* restore the saved PID. */ > - > cmn a1, #4096 > it cc > RETINSTR(cc, lr) > diff --git a/sysdeps/unix/sysv/linux/createthread.c b/sysdeps/unix/sysv/linux/createthread.c > index 6d32cec..ec86f50 100644 > --- a/sysdeps/unix/sysv/linux/createthread.c > +++ b/sysdeps/unix/sysv/linux/createthread.c > @@ -128,10 +128,10 @@ create_thread (struct pthread *pd, const struct pthread_attr *attr, > /* The operation failed. We have to kill the thread. > We let the normal cancellation mechanism do the work. */ > > + pid_t pid = __getpid (); > INTERNAL_SYSCALL_DECL (err2); > - (void) INTERNAL_SYSCALL (tgkill, err2, 3, > - THREAD_GETMEM (THREAD_SELF, pid), > - pd->tid, SIGCANCEL); > + (void) INTERNAL_SYSCALL_CALL (tgkill, err2, pid, pd->tid, > + SIGCANCEL); > > return INTERNAL_SYSCALL_ERRNO (res, err); > } > diff --git a/sysdeps/unix/sysv/linux/getpid.c b/sysdeps/unix/sysv/linux/getpid.c > index 1124549..2bfafed 100644 > --- a/sysdeps/unix/sysv/linux/getpid.c > +++ b/sysdeps/unix/sysv/linux/getpid.c > @@ -20,43 +20,11 @@ > #include <tls.h> > #include <sysdep.h> > > - > -#if IS_IN (libc) > -static inline __attribute__((always_inline)) pid_t really_getpid (pid_t oldval); > - > -static inline __attribute__((always_inline)) pid_t > -really_getpid (pid_t oldval) > -{ > - if (__glibc_likely (oldval == 0)) > - { > - pid_t selftid = THREAD_GETMEM (THREAD_SELF, tid); > - if (__glibc_likely (selftid != 0)) > - return selftid; > - } > - > - INTERNAL_SYSCALL_DECL (err); > - pid_t result = INTERNAL_SYSCALL (getpid, err, 0); > - > - /* We do not set the PID field in the TID here since we might be > - called from a signal handler while the thread executes fork. */ > - if (oldval == 0) > - THREAD_SETMEM (THREAD_SELF, tid, result); > - return result; > -} > -#endif > - > pid_t > __getpid (void) > { > -#if !IS_IN (libc) > INTERNAL_SYSCALL_DECL (err); > - pid_t result = INTERNAL_SYSCALL (getpid, err, 0); > -#else > - pid_t result = THREAD_GETMEM (THREAD_SELF, pid); > - if (__glibc_unlikely (result <= 0)) > - result = really_getpid (result); > -#endif > - return result; > + return INTERNAL_SYSCALL_CALL (getpid, err); > } > > libc_hidden_def (__getpid) > diff --git a/sysdeps/unix/sysv/linux/hppa/clone.S b/sysdeps/unix/sysv/linux/hppa/clone.S > index 3d037f1..25fcd49 100644 > --- a/sysdeps/unix/sysv/linux/hppa/clone.S > +++ b/sysdeps/unix/sysv/linux/hppa/clone.S > @@ -132,18 +132,6 @@ ENTRY(__clone) > ldwm -64(%sp), %r4 > > .LthreadStart: > -# define CLONE_VM_BIT 23 /* 0x00000100 */ > - /* Load original clone flags. > - If CLONE_VM was passed, don't modify PID/TID. > - Otherwise store the result of getpid to PID/TID. */ > - ldw -56(%sp), %r26 > - bb,<,n %r26, CLONE_VM_BIT, 1f > - ble 0x100(%sr2, %r0) > - ldi __NR_getpid, %r20 > - mfctl %cr27, %r26 > - stw %ret0, PID_THREAD_OFFSET(%r26) > - stw %ret0, TID_THREAD_OFFSET(%r26) > -1: > /* Load up the arguments. */ > ldw -60(%sp), %arg0 > ldw -64(%sp), %r22 > diff --git a/sysdeps/unix/sysv/linux/i386/clone.S b/sysdeps/unix/sysv/linux/i386/clone.S > index 25f2a9c..feae504 100644 > --- a/sysdeps/unix/sysv/linux/i386/clone.S > +++ b/sysdeps/unix/sysv/linux/i386/clone.S > @@ -107,9 +107,6 @@ L(thread_start): > cfi_undefined (eip); > /* Note: %esi is zero. */ > movl %esi,%ebp /* terminate the stack frame */ > - testl $CLONE_VM, %edi > - je L(newpid) > -L(haspid): > call *%ebx > #ifdef PIC > call L(here) > @@ -121,18 +118,6 @@ L(here): > movl $SYS_ify(exit), %eax > ENTER_KERNEL > > - .subsection 2 > -L(newpid): > - movl $SYS_ify(getpid), %eax > - ENTER_KERNEL > -L(nomoregetpid): > - movl %eax, %gs:PID > - movl %eax, %gs:TID > - jmp L(haspid) > - .previous > - cfi_endproc; > - > - cfi_startproc > PSEUDO_END (__clone) > > libc_hidden_def (__clone) > diff --git a/sysdeps/unix/sysv/linux/i386/vfork.S b/sysdeps/unix/sysv/linux/i386/vfork.S > index 7a1d337..a865de2 100644 > --- a/sysdeps/unix/sysv/linux/i386/vfork.S > +++ b/sysdeps/unix/sysv/linux/i386/vfork.S > @@ -34,17 +34,6 @@ ENTRY (__vfork) > cfi_adjust_cfa_offset (-4) > cfi_register (%eip, %ecx) > > - /* Save the TCB-cached PID away in %edx, and then negate the TCB > - field. But if it's zero, set it to 0x80000000 instead. See > - raise.c for the logic that relies on this value. */ > - movl %gs:PID, %edx > - movl %edx, %eax > - negl %eax > - jne 1f > - movl $0x80000000, %eax > -1: movl %eax, %gs:PID > - > - > /* Stuff the syscall number in EAX and enter into the kernel. */ > movl $SYS_ify (vfork), %eax > int $0x80 > @@ -55,14 +44,6 @@ ENTRY (__vfork) > pushl %ecx > cfi_adjust_cfa_offset (4) > > - /* Restore the original value of the TCB cache of the PID, if we're > - the parent. But in the child (syscall return value equals zero), > - leave things as they are. */ > - testl %eax, %eax > - je 1f > - movl %edx, %gs:PID > -1: > - > cmpl $-4095, %eax > /* Branch forward if it failed. */ > jae SYSCALL_ERROR_LABEL > diff --git a/sysdeps/unix/sysv/linux/ia64/clone2.S b/sysdeps/unix/sysv/linux/ia64/clone2.S > index b4cfdfc..e637b6d 100644 > --- a/sysdeps/unix/sysv/linux/ia64/clone2.S > +++ b/sysdeps/unix/sysv/linux/ia64/clone2.S > @@ -67,19 +67,7 @@ ENTRY(__clone2) > (CHILD) mov loc0=gp > (PARENT) ret > ;; > - tbit.nz p6,p0=in3,8 /* CLONE_VM */ > -(p6) br.cond.dptk 1f > - ;; > - mov r15=SYS_ify (getpid) > -(p7) break __BREAK_SYSCALL > - ;; > - add r9=PID,r13 > - add r10=TID,r13 > - ;; > - st4 [r9]=r8 > - st4 [r10]=r8 > - ;; > -1: ld8 out1=[in0],8 /* Retrieve code pointer. */ > + ld8 out1=[in0],8 /* Retrieve code pointer. */ > mov out0=in4 /* Pass proper argument to fn */ > ;; > ld8 gp=[in0] /* Load function gp. */ > diff --git a/sysdeps/unix/sysv/linux/ia64/vfork.S b/sysdeps/unix/sysv/linux/ia64/vfork.S > index 9154d7c..84bfdd5 100644 > --- a/sysdeps/unix/sysv/linux/ia64/vfork.S > +++ b/sysdeps/unix/sysv/linux/ia64/vfork.S > @@ -33,32 +33,12 @@ ENTRY (__libc_vfork) > .prologue // work around a GAS bug which triggers if > .body // first .prologue is not at the beginning of proc. > alloc r2=ar.pfs,0,0,2,0 > - adds r14=PID,r13 > - ;; > - ld4 r16=[r14] > - ;; > - sub r15=0,r16 > - cmp.eq p6,p0=0,r16 > - ;; > -(p6) movl r15=0x80000000 > mov out0=CLONE_VM+CLONE_VFORK+SIGCHLD > mov out1=0 /* Standard sp value. */ > ;; > - st4 [r14]=r15 > DO_CALL (SYS_ify (clone)) > cmp.eq p6,p0=0,r8 > - adds r14=PID,r13 > (p6) br.cond.dptk 1f > - ;; > - ld4 r15=[r14] > - ;; > - extr.u r16=r15,0,31 > - ;; > - cmp.eq p0,p6=0,r16 > - ;; > -(p6) sub r16=0,r15 > - ;; > - st4 [r14]=r16 > 1: > cmp.eq p6,p0=-1,r10 > (p6) br.cond.spnt.few __syscall_error > diff --git a/sysdeps/unix/sysv/linux/m68k/clone.S b/sysdeps/unix/sysv/linux/m68k/clone.S > index 3a82844..630a292 100644 > --- a/sysdeps/unix/sysv/linux/m68k/clone.S > +++ b/sysdeps/unix/sysv/linux/m68k/clone.S > @@ -98,19 +98,6 @@ ENTRY (__clone) > cfi_startproc > cfi_undefined (pc) /* Mark end of stack */ > subl %fp, %fp /* terminate the stack frame */ > - /* Check and see if we need to reset the PID. */ > - andl #CLONE_VM, %d1 > - jne 1f > - movel #SYS_ify (getpid), %d0 > - trap #0 > - movel %a0, -(%sp) > - movel %d0, -(%sp) > - bsrl __m68k_read_tp@PLTPC > - movel (%sp)+, %d0 > - movel %d0, PID_OFFSET(%a0) > - movel %d0, TID_OFFSET(%a0) > - movel (%sp)+, %a0 > -1: > jsr (%a0) > movel %d0, %d1 > movel #SYS_ify (exit), %d0 > diff --git a/sysdeps/unix/sysv/linux/m68k/vfork.S b/sysdeps/unix/sysv/linux/m68k/vfork.S > index 1625a7b..e274793 100644 > --- a/sysdeps/unix/sysv/linux/m68k/vfork.S > +++ b/sysdeps/unix/sysv/linux/m68k/vfork.S > @@ -28,18 +28,6 @@ > > ENTRY (__vfork) > > - /* Save the TCB-cached PID away in %d1, and then negate the TCB > - field. But if it's zero, set it to 0x80000000 instead. See > - raise.c for the logic that relies on this value. */ > - jbsr __m68k_read_tp@PLTPC > - movel %a0, %a1 > - movel PID_OFFSET(%a1), %d0 > - movel %d0, %d1 > - negl %d0 > - jne 1f > - movel #0x80000000, %d0 > -1: movel %d0, PID_OFFSET(%a1) > - > /* Pop the return PC value into A0. */ > movel %sp@+, %a0 > cfi_adjust_cfa_offset (-4) > @@ -49,14 +37,6 @@ ENTRY (__vfork) > movel #SYS_ify (vfork), %d0 > trap #0 > > - /* Restore the original value of the TCB cache of the PID, if we're > - the parent. But in the child (syscall return value equals zero), > - leave things as they are. */ > - tstl %d0 > - jeq 1f > - movel %d1, PID_OFFSET(%a1) > -1: > - > tstl %d0 > jmi .Lerror /* Branch forward if it failed. */ > > diff --git a/sysdeps/unix/sysv/linux/mips/clone.S b/sysdeps/unix/sysv/linux/mips/clone.S > index 39634c5..7ae65ef 100644 > --- a/sysdeps/unix/sysv/linux/mips/clone.S > +++ b/sysdeps/unix/sysv/linux/mips/clone.S > @@ -130,11 +130,6 @@ L(thread_start): > SAVE_GP (GPOFF) > /* The stackframe has been created on entry of clone(). */ > > - /* Check and see if we need to reset the PID. */ > - and a1,a0,CLONE_VM > - beqz a1,L(restore_pid) > -L(donepid): > - > /* Restore the arg for user's function. */ > PTR_L t9,0(sp) /* Function pointer. */ > PTR_L a0,PTRSIZE(sp) /* Argument pointer. */ > @@ -151,14 +146,6 @@ L(donepid): > jal _exit > #endif > > -L(restore_pid): > - li v0,__NR_getpid > - syscall > - READ_THREAD_POINTER(v1) > - INT_S v0,PID_OFFSET(v1) > - INT_S v0,TID_OFFSET(v1) > - b L(donepid) > - > END(__thread_start) > > libc_hidden_def (__clone) > diff --git a/sysdeps/unix/sysv/linux/mips/vfork.S b/sysdeps/unix/sysv/linux/mips/vfork.S > index 1867c86..0b9244b 100644 > --- a/sysdeps/unix/sysv/linux/mips/vfork.S > +++ b/sysdeps/unix/sysv/linux/mips/vfork.S > @@ -60,14 +60,6 @@ NESTED(__libc_vfork,FRAMESZ,sp) > PTR_ADDU sp, FRAMESZ > cfi_adjust_cfa_offset (-FRAMESZ) > > - /* Save the PID value. */ > - READ_THREAD_POINTER(v1) /* Get the thread pointer. */ > - lw a2, PID_OFFSET(v1) /* Load the saved PID. */ > - subu a2, $0, a2 /* Negate it. */ > - bnez a2, 1f /* If it was zero... */ > - lui a2, 0x8000 /* use 0x80000000 instead. */ > -1: sw a2, PID_OFFSET(v1) /* Store the temporary PID. */ > - > li a0, 0x4112 /* CLONE_VM | CLONE_VFORK | SIGCHLD */ > move a1, sp > > @@ -75,17 +67,6 @@ NESTED(__libc_vfork,FRAMESZ,sp) > li v0,__NR_clone > syscall > > - /* Restore the old PID value in the parent. */ > - beqz v0, 1f /* If we are the parent... */ > - READ_THREAD_POINTER(v1) /* Get the thread pointer. */ > - lw a2, PID_OFFSET(v1) /* Load the saved PID. */ > - subu a2, $0, a2 /* Re-negate it. */ > - lui a0, 0x8000 /* Load 0x80000000... */ > - bne a2, a0, 2f /* ... compare against it... */ > - li a2, 0 /* ... use 0 instead. */ > -2: sw a2, PID_OFFSET(v1) /* Restore the PID. */ > -1: > - > cfi_remember_state > bnez a3,L(error) > > diff --git a/sysdeps/unix/sysv/linux/nios2/clone.S b/sysdeps/unix/sysv/linux/nios2/clone.S > index 30b6e4a..c9fa00f 100644 > --- a/sysdeps/unix/sysv/linux/nios2/clone.S > +++ b/sysdeps/unix/sysv/linux/nios2/clone.S > @@ -68,14 +68,6 @@ thread_start: > cfi_startproc > cfi_undefined (ra) > > - /* We expect the argument registers to be preserved across system > - calls and across task cloning, so flags should be in r4 here. */ > - andi r2, r4, CLONE_VM > - bne r2, zero, 2f > - DO_CALL (getpid, 0) > - stw r2, PID_OFFSET(r23) > - stw r2, TID_OFFSET(r23) > -2: > ldw r5, 4(sp) /* Function pointer. */ > ldw r4, 0(sp) /* Argument pointer. */ > addi sp, sp, 8 > diff --git a/sysdeps/unix/sysv/linux/nios2/vfork.S b/sysdeps/unix/sysv/linux/nios2/vfork.S > index c1bb9c7..8997269 100644 > --- a/sysdeps/unix/sysv/linux/nios2/vfork.S > +++ b/sysdeps/unix/sysv/linux/nios2/vfork.S > @@ -21,20 +21,10 @@ > > ENTRY(__vfork) > > - ldw r6, PID_OFFSET(r23) > - sub r7, zero, r6 > - bne r7, zero, 2f > - movhi r7, %hi(0x80000000) > -2: > - stw r7, PID_OFFSET(r23) > - > movi r4, 0x4111 /* (CLONE_VM | CLONE_VFORK | SIGCHLD) */ > mov r5, zero > DO_CALL (clone, 2) > > - beq r2, zero, 1f > - stw r6, PID_OFFSET(r23) > -1: > bne r7, zero, SYSCALL_ERROR_LABEL > ret > > diff --git a/sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S b/sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S > index bebadbf..49fe01e 100644 > --- a/sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S > +++ b/sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S > @@ -76,15 +76,6 @@ ENTRY (__clone) > crandc cr1*4+eq,cr1*4+eq,cr0*4+so > bne- cr1,L(parent) /* The '-' is to minimise the race. */ > > - /* If CLONE_VM is set do not update the pid/tid field. */ > - andi. r0,r28,CLONE_VM > - bne+ cr0,L(oldpid) > - > - DO_CALL(SYS_ify(getpid)) > - stw r3,TID(r2) > - stw r3,PID(r2) > -L(oldpid): > - > /* Call procedure. */ > mtctr r30 > mr r3,r31 > diff --git a/sysdeps/unix/sysv/linux/powerpc/powerpc32/vfork.S b/sysdeps/unix/sysv/linux/powerpc/powerpc32/vfork.S > index edbc7de..0a72495 100644 > --- a/sysdeps/unix/sysv/linux/powerpc/powerpc32/vfork.S > +++ b/sysdeps/unix/sysv/linux/powerpc/powerpc32/vfork.S > @@ -27,34 +27,8 @@ > > ENTRY (__vfork) > > - /* Load the TCB-cached PID value and negates it. If It it is zero > - sets it to 0x800000. And then sets its value again on TCB field. > - See raise.c for the logic that relies on this value. */ > - > - lwz r0,PID(r2) > - cmpwi cr0,r0,0 > - neg r0,r0 > - bne- cr0,1f > - lis r0,0x8000 > -1: stw r0,PID(r2) > - > DO_CALL (SYS_ify (vfork)) > > - cmpwi cr1,r3,0 > - beqlr- 1 > - > - /* Restore the original value of the TCB cache of the PID, if we're > - the parent. But in the child (syscall return value equals zero), > - leave things as they are. */ > - lwz r0,PID(r2) > - /* Cannot use clrlwi. here, because cr0 needs to be preserved > - until PSEUDO_RET. */ > - clrlwi r4,r0,1 > - cmpwi cr1,r4,0 > - beq- cr1,1f > - neg r4,r0 > -1: stw r4,PID(r2) > - > PSEUDO_RET > > PSEUDO_END (__vfork) > diff --git a/sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S b/sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S > index 7c59b9b..d8604f6 100644 > --- a/sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S > +++ b/sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S > @@ -78,15 +78,6 @@ ENTRY (__clone) > crandc cr1*4+eq,cr1*4+eq,cr0*4+so > bne- cr1,L(parent) /* The '-' is to minimise the race. */ > > - /* If CLONE_VM is set do not update the pid/tid field. */ > - rldicl. r0,r29,56,63 /* flags & CLONE_VM. */ > - bne+ cr0,L(oldpid) > - > - DO_CALL(SYS_ify(getpid)) > - stw r3,TID(r13) > - stw r3,PID(r13) > -L(oldpid): > - > std r2,FRAME_TOC_SAVE(r1) > /* Call procedure. */ > PPC64_LOAD_FUNCPTR r30 > diff --git a/sysdeps/unix/sysv/linux/powerpc/powerpc64/vfork.S b/sysdeps/unix/sysv/linux/powerpc/powerpc64/vfork.S > index 3083ab7..6b4cf43 100644 > --- a/sysdeps/unix/sysv/linux/powerpc/powerpc64/vfork.S > +++ b/sysdeps/unix/sysv/linux/powerpc/powerpc64/vfork.S > @@ -28,31 +28,8 @@ > ENTRY (__vfork) > CALL_MCOUNT 0 > > - /* Load the TCB-cached PID value and negates it. If It it is zero > - sets it to 0x800000. And then sets its value again on TCB field. > - See raise.c for the logic that relies on this value. */ > - lwz r0,PID(r13) > - cmpwi cr0,r0,0 > - neg r0,r0 > - bne- cr0,1f > - lis r0,0x8000 > -1: stw r0,PID(r13) > - > DO_CALL (SYS_ify (vfork)) > > - cmpwi cr1,r3,0 > - beqlr- 1 > - > - /* Restore the original value of the TCB cache of the PID, if we're > - the parent. But in the child (syscall return value equals zero), > - leave things as they are. */ > - lwz r0,PID(r13) > - clrlwi r4,r0,1 > - cmpwi cr1,r4,0 > - beq- cr1,1f > - neg r4,r0 > -1: stw r4,PID(r13) > - > PSEUDO_RET > > PSEUDO_END (__vfork) > diff --git a/sysdeps/unix/sysv/linux/pthread-pids.h b/sysdeps/unix/sysv/linux/pthread-pids.h > index d42bba0..618a5b1 100644 > --- a/sysdeps/unix/sysv/linux/pthread-pids.h > +++ b/sysdeps/unix/sysv/linux/pthread-pids.h > @@ -26,5 +26,5 @@ static inline void > __pthread_initialize_pids (struct pthread *pd) > { > INTERNAL_SYSCALL_DECL (err); > - pd->pid = pd->tid = INTERNAL_SYSCALL (set_tid_address, err, 1, &pd->tid); > + pd->tid = INTERNAL_SYSCALL_CALL (set_tid_address, err, &pd->tid); > } > diff --git a/sysdeps/unix/sysv/linux/pthread_kill.c b/sysdeps/unix/sysv/linux/pthread_kill.c > index bcb3009..15c9ba6 100644 > --- a/sysdeps/unix/sysv/linux/pthread_kill.c > +++ b/sysdeps/unix/sysv/linux/pthread_kill.c > @@ -21,6 +21,7 @@ > #include <pthreadP.h> > #include <tls.h> > #include <sysdep.h> > +#include <unistd.h> > > > int > @@ -49,14 +50,15 @@ __pthread_kill (pthread_t threadid, int signo) > /* We have a special syscall to do the work. */ > INTERNAL_SYSCALL_DECL (err); > > + pid_t pid = getpid (); > + > /* One comment: The PID field in the TCB can temporarily be changed > (in fork). But this must not affect this code here. Since this > function would have to be called while the thread is executing > fork, it would have to happen in a signal handler. But this is > no allowed, pthread_kill is not guaranteed to be async-safe. */ > int val; > - val = INTERNAL_SYSCALL (tgkill, err, 3, THREAD_GETMEM (THREAD_SELF, pid), > - tid, signo); > + val = INTERNAL_SYSCALL_CALL (tgkill, err, pid, tid, signo); > > return (INTERNAL_SYSCALL_ERROR_P (val, err) > ? INTERNAL_SYSCALL_ERRNO (val, err) : 0); > diff --git a/sysdeps/unix/sysv/linux/pthread_sigqueue.c b/sysdeps/unix/sysv/linux/pthread_sigqueue.c > index 7694d54..642366b 100644 > --- a/sysdeps/unix/sysv/linux/pthread_sigqueue.c > +++ b/sysdeps/unix/sysv/linux/pthread_sigqueue.c > @@ -49,12 +49,14 @@ pthread_sigqueue (pthread_t threadid, int signo, const union sigval value) > if (signo == SIGCANCEL || signo == SIGTIMER || signo == SIGSETXID) > return EINVAL; > > + pid_t pid = getpid (); > + > /* Set up the siginfo_t structure. */ > siginfo_t info; > memset (&info, '\0', sizeof (siginfo_t)); > info.si_signo = signo; > info.si_code = SI_QUEUE; > - info.si_pid = THREAD_GETMEM (THREAD_SELF, pid); > + info.si_pid = pid; > info.si_uid = getuid (); > info.si_value = value; > > @@ -66,9 +68,8 @@ pthread_sigqueue (pthread_t threadid, int signo, const union sigval value) > function would have to be called while the thread is executing > fork, it would have to happen in a signal handler. But this is > no allowed, pthread_sigqueue is not guaranteed to be async-safe. */ > - int val = INTERNAL_SYSCALL (rt_tgsigqueueinfo, err, 4, > - THREAD_GETMEM (THREAD_SELF, pid), > - tid, signo, &info); > + int val = INTERNAL_SYSCALL_CALL (rt_tgsigqueueinfo, err, pid, tid, signo, > + &info); > > return (INTERNAL_SYSCALL_ERROR_P (val, err) > ? INTERNAL_SYSCALL_ERRNO (val, err) : 0); > diff --git a/sysdeps/unix/sysv/linux/s390/s390-32/clone.S b/sysdeps/unix/sysv/linux/s390/s390-32/clone.S > index 2f8fa0b..b1de148 100644 > --- a/sysdeps/unix/sysv/linux/s390/s390-32/clone.S > +++ b/sysdeps/unix/sysv/linux/s390/s390-32/clone.S > @@ -54,13 +54,6 @@ error: > PSEUDO_END (__clone) > > thread_start: > - tml %r3,256 /* CLONE_VM == 0x00000100 */ > - jne 1f > - svc SYS_ify(getpid) > - ear %r3,%a0 > - st %r2,PID(%r3) > - st %r2,TID(%r3) > -1: > /* fn is in gpr 1, arg in gpr 0 */ > lr %r2,%r0 /* set first parameter to void *arg */ > ahi %r15,-96 /* make room on the stack for the save area */ > diff --git a/sysdeps/unix/sysv/linux/s390/s390-32/vfork.S b/sysdeps/unix/sysv/linux/s390/s390-32/vfork.S > index b7588eb..cc60e13 100644 > --- a/sysdeps/unix/sysv/linux/s390/s390-32/vfork.S > +++ b/sysdeps/unix/sysv/linux/s390/s390-32/vfork.S > @@ -28,21 +28,9 @@ > and the process ID of the new process to the old process. */ > > ENTRY (__libc_vfork) > - ear %r4,%a0 > - lhi %r1,1 > - icm %r3,15,PID(%r4) > - sll %r1,31 > - je 1f > - lcr %r1,%r3 > -1: st %r1,PID(%r4) > - > /* Do vfork system call. */ > svc SYS_ify (vfork) > > - ltr %r2,%r2 > - je 1f > - st %r3,PID(%r4) > -1: > /* Check for error. */ > lhi %r4,-4095 > clr %r2,%r4 > diff --git a/sysdeps/unix/sysv/linux/s390/s390-64/clone.S b/sysdeps/unix/sysv/linux/s390/s390-64/clone.S > index fb81692..29606ac 100644 > --- a/sysdeps/unix/sysv/linux/s390/s390-64/clone.S > +++ b/sysdeps/unix/sysv/linux/s390/s390-64/clone.S > @@ -55,15 +55,6 @@ error: > PSEUDO_END (__clone) > > thread_start: > - tmll %r3,256 /* CLONE_VM == 0x00000100 */ > - jne 1f > - svc SYS_ify(getpid) > - ear %r3,%a0 > - sllg %r3,%r3,32 > - ear %r3,%a1 > - st %r2,PID(%r3) > - st %r2,TID(%r3) > -1: > /* fn is in gpr 1, arg in gpr 0 */ > lgr %r2,%r0 /* set first parameter to void *arg */ > aghi %r15,-160 /* make room on the stack for the save area */ > diff --git a/sysdeps/unix/sysv/linux/s390/s390-64/vfork.S b/sysdeps/unix/sysv/linux/s390/s390-64/vfork.S > index 0bd2161..b9a813f 100644 > --- a/sysdeps/unix/sysv/linux/s390/s390-64/vfork.S > +++ b/sysdeps/unix/sysv/linux/s390/s390-64/vfork.S > @@ -28,22 +28,9 @@ > and the process ID of the new process to the old process. */ > > ENTRY (__libc_vfork) > - ear %r4,%a0 > - sllg %r4,%r4,32 > - ear %r4,%a1 > - icm %r3,15,PID(%r4) > - llilh %r1,32768 > - je 1f > - lcr %r1,%r3 > -1: st %r1,PID(%r4) > - > /* Do vfork system call. */ > svc SYS_ify (vfork) > > - ltgr %r2,%r2 > - je 1f > - st %r3,PID(%r4) > -1: > /* Check for error. */ > lghi %r4,-4095 > clgr %r2,%r4 > diff --git a/sysdeps/unix/sysv/linux/sh/clone.S b/sysdeps/unix/sysv/linux/sh/clone.S > index 4cd7df1..ae27dad 100644 > --- a/sysdeps/unix/sysv/linux/sh/clone.S > +++ b/sysdeps/unix/sysv/linux/sh/clone.S > @@ -66,23 +66,7 @@ ENTRY(__clone) > 2: > /* terminate the stack frame */ > mov #0, r14 > - mov r4, r0 > - shlr8 r0 > - tst #1, r0 // CLONE_VM = (1 << 8) > - bf/s 4f > - mov r4, r0 > - /* new pid */ > - mov #+SYS_ify(getpid), r3 > - trapa #0x15 > -3: > - stc gbr, r1 > - mov.w .Lpidoff, r2 > - add r1, r2 > - mov.l r0, @r2 > - mov.w .Ltidoff, r2 > - add r1, r2 > - mov.l r0, @r2 > -4: > + > /* thread starts */ > mov.l @r15, r1 > jsr @r1 > diff --git a/sysdeps/unix/sysv/linux/sh/vfork.S b/sysdeps/unix/sysv/linux/sh/vfork.S > index 6895bc5..777da1e 100644 > --- a/sysdeps/unix/sysv/linux/sh/vfork.S > +++ b/sysdeps/unix/sysv/linux/sh/vfork.S > @@ -26,30 +26,11 @@ > and the process ID of the new process to the old process. */ > > ENTRY (__libc_vfork) > - /* Save the PID value. */ > - stc gbr, r2 > - mov.w .L2, r0 > - mov.l @(r0,r2), r4 > - neg r4, r1 > - tst r1, r1 > - bf 1f > - mov #1, r1 > - rotr r1 > -1: > - mov.l r1, @(r0,r2) > > mov.w .L1, r3 > trapa #0x10 > mov r0, r1 > > - /* Restore the old PID value in the parent. */ > - tst r0, r0 > - bt.s 2f > - stc gbr, r2 > - mov.w .L2, r0 > - mov.l r4, @(r0,r2) > - mov r1, r0 > -2: > mov #-12, r2 > shad r2, r1 > not r1, r1 // r1=0 means r0 = -1 to -4095 > diff --git a/sysdeps/unix/sysv/linux/sparc/sparc32/clone.S b/sysdeps/unix/sysv/linux/sparc/sparc32/clone.S > index d6c92f6..0456a0d 100644 > --- a/sysdeps/unix/sysv/linux/sparc/sparc32/clone.S > +++ b/sysdeps/unix/sysv/linux/sparc/sparc32/clone.S > @@ -79,13 +79,6 @@ END(__clone) > > .type __thread_start,@function > __thread_start: > - andcc %g4, CLONE_VM, %g0 > - bne 1f > - set __NR_getpid,%g1 > - ta 0x10 > - st %o0,[%g7 + PID] > - st %o0,[%g7 + TID] > -1: > mov %g0, %fp /* terminate backtrace */ > call %g2 > mov %g3,%o0 > diff --git a/sysdeps/unix/sysv/linux/sparc/sparc32/vfork.S b/sysdeps/unix/sysv/linux/sparc/sparc32/vfork.S > index 0d0a3b5..6d98503 100644 > --- a/sysdeps/unix/sysv/linux/sparc/sparc32/vfork.S > +++ b/sysdeps/unix/sysv/linux/sparc/sparc32/vfork.S > @@ -22,24 +22,14 @@ > .text > .globl __syscall_error > ENTRY(__libc_vfork) > - ld [%g7 + PID], %o5 > - cmp %o5, 0 > - bne 1f > - sub %g0, %o5, %o4 > - sethi %hi(0x80000000), %o4 > -1: st %o4, [%g7 + PID] > - > LOADSYSCALL(vfork) > ta 0x10 > bcc 2f > mov %o7, %g1 > - st %o5, [%g7 + PID] > call __syscall_error > mov %g1, %o7 > 2: sub %o1, 1, %o1 > andcc %o0, %o1, %o0 > - bne,a 1f > - st %o5, [%g7 + PID] > 1: retl > nop > END(__libc_vfork) > diff --git a/sysdeps/unix/sysv/linux/sparc/sparc64/clone.S b/sysdeps/unix/sysv/linux/sparc/sparc64/clone.S > index b0f6266..6ffead8 100644 > --- a/sysdeps/unix/sysv/linux/sparc/sparc64/clone.S > +++ b/sysdeps/unix/sysv/linux/sparc/sparc64/clone.S > @@ -76,13 +76,6 @@ END(__clone) > > .type __thread_start,@function > __thread_start: > - andcc %g4, CLONE_VM, %g0 > - bne,pt %icc, 1f > - set __NR_getpid,%g1 > - ta 0x6d > - st %o0,[%g7 + PID] > - st %o0,[%g7 + TID] > -1: > mov %g0, %fp /* terminate backtrace */ > call %g2 > mov %g3,%o0 > diff --git a/sysdeps/unix/sysv/linux/sparc/sparc64/vfork.S b/sysdeps/unix/sysv/linux/sparc/sparc64/vfork.S > index 0818eba..298dd19 100644 > --- a/sysdeps/unix/sysv/linux/sparc/sparc64/vfork.S > +++ b/sysdeps/unix/sysv/linux/sparc/sparc64/vfork.S > @@ -22,24 +22,14 @@ > .text > .globl __syscall_error > ENTRY(__libc_vfork) > - ld [%g7 + PID], %o5 > - sethi %hi(0x80000000), %o3 > - cmp %o5, 0 > - sub %g0, %o5, %o4 > - move %icc, %o3, %o4 > - st %o4, [%g7 + PID] > - > LOADSYSCALL(vfork) > ta 0x6d > bcc,pt %xcc, 2f > mov %o7, %g1 > - st %o5, [%g7 + PID] > call __syscall_error > mov %g1, %o7 > 2: sub %o1, 1, %o1 > andcc %o0, %o1, %o0 > - bne,a,pt %icc, 1f > - st %o5, [%g7 + PID] > 1: retl > nop > END(__libc_vfork) > diff --git a/sysdeps/unix/sysv/linux/tile/clone.S b/sysdeps/unix/sysv/linux/tile/clone.S > index d1d3646..3f9e3d5 100644 > --- a/sysdeps/unix/sysv/linux/tile/clone.S > +++ b/sysdeps/unix/sysv/linux/tile/clone.S > @@ -163,22 +163,6 @@ ENTRY (__clone) > .Lthread_start: > cfi_def_cfa_offset (FRAME_SIZE) > cfi_undefined (lr) > - /* Check and see if we need to reset the PID, which we do if > - CLONE_VM isn't set, i.e. it's a fork-like clone with a new > - address space. In that case we update the cached values > - from the true system pid (retrieved via __NR_getpid syscall). */ > - moveli r0, CLONE_VM > - and r0, r30, r0 > - BNEZ r0, .Lno_reset_pid /* CLONE_VM is set */ > - moveli TREG_SYSCALL_NR_NAME, __NR_getpid > - swint1 > - ADDLI_PTR r2, tp, PID_OFFSET > - { > - ST4 r2, r0 > - ADDLI_PTR r2, tp, TID_OFFSET > - } > - ST4 r2, r0 > -.Lno_reset_pid: > { > /* Invoke user function with specified argument. */ > move r0, r31 > diff --git a/sysdeps/unix/sysv/linux/tile/vfork.S b/sysdeps/unix/sysv/linux/tile/vfork.S > index d8c5ce3..2272777 100644 > --- a/sysdeps/unix/sysv/linux/tile/vfork.S > +++ b/sysdeps/unix/sysv/linux/tile/vfork.S > @@ -30,18 +30,6 @@ > .text > ENTRY (__vfork) > { > - addli r11, tp, PID_OFFSET /* Point at PID. */ > - movei r13, 1 > - } > - { > - LD4U r12, r11 /* Load the saved PID. */ > - shli r13, r13, 31 /* Build 0x80000000. */ > - } > - sub r12, zero, r12 /* Negate it. */ > - CMOVEQZ r12, r12, r13 /* Replace zero pids. */ > - ST4 r11, r12 /* Store the temporary PID. */ > - > - { > moveli r0, CLONE_VFORK | CLONE_VM | SIGCHLD > move r1, zero > } > @@ -52,22 +40,6 @@ ENTRY (__vfork) > moveli TREG_SYSCALL_NR_NAME, __NR_clone > swint1 > > - BEQZ r0, 1f /* If we are the parent... */ > - { > - addli r11, tp, PID_OFFSET /* Point at PID. */ > - movei r13, 1 > - } > - { > - LD4U r12, r11 /* Load the saved PID. */ > - shli r13, r13, 31 /* Build 0x80000000. */ > - } > - { > - CMPEQ r13, r12, r12 /* Test for that value. */ > - sub r12, zero, r12 /* Re-negate it. */ > - } > - CMOVNEZ r12, r13, zero /* Replace zero pids. */ > - ST4 r11, r12 /* Restore the PID. */ > -1: > BNEZ r1, 0f > jrp lr > PSEUDO_END (__vfork) > diff --git a/sysdeps/unix/sysv/linux/tst-clone2.c b/sysdeps/unix/sysv/linux/tst-clone2.c > index 68a7e6d..b20332a 100644 > --- a/sysdeps/unix/sysv/linux/tst-clone2.c > +++ b/sysdeps/unix/sysv/linux/tst-clone2.c > @@ -28,8 +28,14 @@ > #include <stdlib.h> > #include <sys/types.h> > #include <sys/wait.h> > +#include <sys/syscall.h> > > -#include <tls.h> /* for THREAD_* macros. */ > +#include <stackinfo.h> /* For _STACK_GROWS_{UP,DOWN}. */ > + > +static int do_test (void); > + > +#define TEST_FUNCTION do_test () > +#include <test-skeleton.c> > > static int sig; > static int pipefd[2]; > @@ -39,9 +45,16 @@ f (void *a) > { > close (pipefd[0]); > > - pid_t pid = THREAD_GETMEM (THREAD_SELF, pid); > - pid_t tid = THREAD_GETMEM (THREAD_SELF, tid); > + /* Clone without flags do not cache the pid and tid is only set in thread > + creation by using CLONE_PARENT_SETTID plus pthread tid field address. > + So to actually get all parent's pid and own pid/tid it requires to use > + the syscalls. */ > + pid_t ppid = getppid (); > + pid_t pid = getpid (); > + pid_t tid = syscall (__NR_gettid); > > + while (write (pipefd[1], &ppid, sizeof ppid) < 0) > + continue; > while (write (pipefd[1], &pid, sizeof pid) < 0) > continue; > while (write (pipefd[1], &tid, sizeof tid) < 0) > @@ -52,26 +65,19 @@ f (void *a) > > > static int > -clone_test (int clone_flags) > +do_test (void) > { > sig = SIGRTMIN; > sigset_t ss; > sigemptyset (&ss); > sigaddset (&ss, sig); > if (sigprocmask (SIG_BLOCK, &ss, NULL) != 0) > - { > - printf ("sigprocmask failed: %m\n"); > - return 1; > - } > + FAIL_EXIT1 ("sigprocmask failed: %m"); > > if (pipe2 (pipefd, O_CLOEXEC)) > - { > - printf ("sigprocmask failed: %m\n"); > - return 1; > - } > - > - pid_t ppid = getpid (); > + FAIL_EXIT1 ("pipe failed: %m"); > > + int clone_flags = 0; > #ifdef __ia64__ > extern int __clone2 (int (*__fn) (void *__arg), void *__child_stack_base, > size_t __child_stack_size, int __flags, > @@ -88,61 +94,47 @@ clone_test (int clone_flags) > #error "Define either _STACK_GROWS_DOWN or _STACK_GROWS_UP" > #endif > #endif > + > close (pipefd[1]); > > if (p == -1) > + FAIL_EXIT1("clone failed: %m"); > + > + pid_t ppid, pid, tid; > + if (read (pipefd[0], &ppid, sizeof pid) != sizeof pid) > { > - printf ("clone failed: %m\n"); > - return 1; > + kill (p, SIGKILL); > + FAIL_EXIT1 ("read ppid failed: %m"); > } > - > - pid_t pid, tid; > if (read (pipefd[0], &pid, sizeof pid) != sizeof pid) > { > - printf ("read pid failed: %m\n"); > kill (p, SIGKILL); > - return 1; > + FAIL_EXIT1 ("read pid failed: %m"); > } > if (read (pipefd[0], &tid, sizeof tid) != sizeof tid) > { > - printf ("read pid failed: %m\n"); > kill (p, SIGKILL); > - return 1; > + FAIL_EXIT1 ("read tid failed: %m"); > } > > close (pipefd[0]); > > int ret = 0; > > - /* For CLONE_VM glibc clone implementation does not change the pthread > - pid/tid field. */ > - if ((clone_flags & CLONE_VM) == CLONE_VM) > - { > - if ((ppid != pid) || (ppid != tid)) > - { > - printf ("parent pid (%i) != received pid/tid (%i/%i)\n", > - (int)ppid, (int)pid, (int)tid); > - ret = 1; > - } > - } > - /* For any other flag clone updates the new pthread pid and tid with > - the clone return value. */ > - else > - { > - if ((p != pid) || (p != tid)) > - { > - printf ("child pid (%i) != received pid/tid (%i/%i)\n", > - (int)p, (int)pid, (int)tid); > - ret = 1; > - } > - } > + pid_t own_pid = getpid (); > + pid_t own_tid = syscall (__NR_gettid); > + > + /* Some sanity checks for clone syscall: returned ppid should be currernt > + pid and both returned tid/pid should be different from current one. */ > + if ((ppid != own_pid) || (pid == own_pid) || (tid == own_tid)) > + FAIL_RET ("ppid=%i pid=%i tid=%i | own_pid=%i own_tid=%i", > + (int)ppid, (int)pid, (int)tid, (int)own_pid, (int)own_tid); > > int e; > if (waitpid (p, &e, __WCLONE) != p) > { > - puts ("waitpid failed"); > kill (p, SIGKILL); > - return 1; > + FAIL_EXIT1 ("waitpid failed"); > } > if (!WIFEXITED (e)) > { > @@ -150,29 +142,10 @@ clone_test (int clone_flags) > printf ("died from signal %s\n", strsignal (WTERMSIG (e))); > else > puts ("did not terminate correctly"); > - return 1; > + exit (EXIT_FAILURE); > } > if (WEXITSTATUS (e) != 0) > - { > - printf ("exit code %d\n", WEXITSTATUS (e)); > - return 1; > - } > + FAIL_EXIT1 ("exit code %d", WEXITSTATUS (e)); > > return ret; > } > - > -int > -do_test (void) > -{ > - /* First, check that the clone implementation, without any flag, updates > - the struct pthread to contain the new PID and TID. */ > - int ret = clone_test (0); > - /* Second, check that with CLONE_VM the struct pthread PID and TID fields > - remain unmodified after the clone. Any modifications would cause problem > - for the parent as described in bug 19957. */ > - ret += clone_test (CLONE_VM); > - return ret; > -} > - > -#define TEST_FUNCTION do_test () > -#include "../test-skeleton.c" > diff --git a/sysdeps/unix/sysv/linux/x86_64/clone.S b/sysdeps/unix/sysv/linux/x86_64/clone.S > index 66f4b11..5629aed 100644 > --- a/sysdeps/unix/sysv/linux/x86_64/clone.S > +++ b/sysdeps/unix/sysv/linux/x86_64/clone.S > @@ -91,14 +91,6 @@ L(thread_start): > the outermost frame obviously. */ > xorl %ebp, %ebp > > - andq $CLONE_VM, %rdi > - jne 1f > - movl $SYS_ify(getpid), %eax > - syscall > - movl %eax, %fs:PID > - movl %eax, %fs:TID > -1: > - > /* Set up arguments for the function call. */ > popq %rax /* Function to call. */ > popq %rdi /* Argument. */ > diff --git a/sysdeps/unix/sysv/linux/x86_64/vfork.S b/sysdeps/unix/sysv/linux/x86_64/vfork.S > index 8332ade..cdd2dea 100644 > --- a/sysdeps/unix/sysv/linux/x86_64/vfork.S > +++ b/sysdeps/unix/sysv/linux/x86_64/vfork.S > @@ -34,16 +34,6 @@ ENTRY (__vfork) > cfi_adjust_cfa_offset(-8) > cfi_register(%rip, %rdi) > > - /* Save the TCB-cached PID away in %esi, and then negate the TCB > - field. But if it's zero, set it to 0x80000000 instead. See > - raise.c for the logic that relies on this value. */ > - movl %fs:PID, %esi > - movl $0x80000000, %ecx > - movl %esi, %edx > - negl %edx > - cmove %ecx, %edx > - movl %edx, %fs:PID > - > /* Stuff the syscall number in RAX and enter into the kernel. */ > movl $SYS_ify (vfork), %eax > syscall > @@ -52,14 +42,6 @@ ENTRY (__vfork) > pushq %rdi > cfi_adjust_cfa_offset(8) > > - /* Restore the original value of the TCB cache of the PID, if we're > - the parent. But in the child (syscall return value equals zero), > - leave things as they are. */ > - testq %rax, %rax > - je 1f > - movl %esi, %fs:PID > -1: > - > cmpl $-4095, %eax > jae SYSCALL_ERROR_LABEL /* Branch forward if it failed. */ > > diff --git a/sysdeps/x86_64/nptl/tcb-offsets.sym b/sysdeps/x86_64/nptl/tcb-offsets.sym > index aeb7526..8a25c48 100644 > --- a/sysdeps/x86_64/nptl/tcb-offsets.sym > +++ b/sysdeps/x86_64/nptl/tcb-offsets.sym > @@ -4,7 +4,6 @@ > > RESULT offsetof (struct pthread, result) > TID offsetof (struct pthread, tid) > -PID offsetof (struct pthread, pid) > CANCELHANDLING offsetof (struct pthread, cancelhandling) > CLEANUP_JMP_BUF offsetof (struct pthread, cleanup_jmp_buf) > CLEANUP offsetof (struct pthread, cleanup) >
On 10/13/2016 09:45 PM, Adhemerval Zanella wrote: > This patch remove the PID cache and usage in current GLIBC code. Current > usage is mainly used for performance optimization to avoid the syscall, > however it adds some issues: > > - The exposed clone syscall will try to set pid/tid to make the new > thread somewhat compatible with current GLIBC assumptions. This cause > a set of issue with new workloads and usercases (such as BZ#17214 and “usecases” > [1]) as well for new internal usage of clone to optimize other algorithms > (such as clone plus CLONE_VM for posix_spawn, BZ#19957). > > - The caching complexity also added some bugs in the past [2] [3] and > requires more effort of each port to handle such requirements (for > both clone and vfork implementation). > > - Caching performance gain in mainly or getpid and some specific > code paths. The getpid performance leverage is questionable [4], > either by the idea of getpid being a hotspot as for the getpid > implementation itself (if it is indeed a justifiable hotspot a > vDSO symbol could let to a much more simpler solution). It's a hotspot for incorrect/broken fork detection. > Other usage is mainly for non usual code paths, such as pthread > cancellation signal and handling. > > For thread creation (on atack allocation) the code simplification in fact “stack allocation” > adds some performance gain due the no need of transverse the stack > cache and invalidate each element pid. > > Other thread usages will require a direct getpid syscall, such as > cancellation/setxid signal, thread cancellation, thread fail path > (at create_thread), and thread signal (pthread_kill and > pthread_sigqueue). However these are hardly usual hotspots and I > think adding a syscall is justifiable. > > It also simplifies both the clone and vfork arch-specific implementation. > And by review each fork implementation there are some discrepancies that > this patch also solves: > > - microblaze clone/vfork does not set/reset the pid/tid field > - hppa uses the default vfork implementation that fallback to fork. > Since vfork is deprecated I do not think we should bother with it. > > The patch also removes the TID caching in clone. My understanding for > such semantic is try provide some pthread usage after a user program > issue clone directly (as done by thread creation with CLONE_PARENT_SETTID > and pthread tid member). However, as stated before in multiple threads, > GLIBC provides clone syscalls without futher supporting all this “further” > semantics. It means that, although GLIBC currently tries a better effort, > since it does not make any more guarantees, specially for newer and newer > clone flags. So the question is whether this is used internally. Why do you think this is safe? Because we set it again with SET_TID_ADDRESS? > diff --git a/nptl/descr.h b/nptl/descr.h > index 8e4938d..17a2c9f 100644 > --- a/nptl/descr.h > +++ b/nptl/descr.h > @@ -167,7 +167,7 @@ struct pthread > therefore stack) used' flag. */ > pid_t tid; > > - /* Process ID - thread group ID in kernel speak. */ > + /* Ununsed. */ > pid_t pid; Please rename to “pid_unused” or something like that, to make sure it's no longer referenced. > diff --git a/sysdeps/unix/sysv/linux/getpid.c b/sysdeps/unix/sysv/linux/getpid.c > index 1124549..2bfafed 100644 > --- a/sysdeps/unix/sysv/linux/getpid.c > +++ b/sysdeps/unix/sysv/linux/getpid.c Can you drop this file completely, so that the default implementation is used? > diff --git a/sysdeps/unix/sysv/linux/pthread_kill.c b/sysdeps/unix/sysv/linux/pthread_kill.c > @@ -49,14 +50,15 @@ __pthread_kill (pthread_t threadid, int signo) > /* We have a special syscall to do the work. */ > INTERNAL_SYSCALL_DECL (err); > > + pid_t pid = getpid (); Use __getpid for consistency? > /* One comment: The PID field in the TCB can temporarily be changed > (in fork). But this must not affect this code here. Since this > function would have to be called while the thread is executing > fork, it would have to happen in a signal handler. But this is > no allowed, pthread_kill is not guaranteed to be async-safe. */ Comment is outdated. > diff --git a/sysdeps/unix/sysv/linux/pthread_sigqueue.c b/sysdeps/unix/sysv/linux/pthread_sigqueue.c > index 7694d54..642366b 100644 > --- a/sysdeps/unix/sysv/linux/pthread_sigqueue.c > +++ b/sysdeps/unix/sysv/linux/pthread_sigqueue.c > @@ -49,12 +49,14 @@ pthread_sigqueue (pthread_t threadid, int signo, const union sigval value) > if (signo == SIGCANCEL || signo == SIGTIMER || signo == SIGSETXID) > return EINVAL; > > + pid_t pid = getpid (); Use __getpid for consistency? > function would have to be called while the thread is executing > fork, it would have to happen in a signal handler. But this is Comment is outdated. > diff --git a/sysdeps/unix/sysv/linux/tst-clone2.c b/sysdeps/unix/sysv/linux/tst-clone2.c > index 68a7e6d..b20332a 100644 > --- a/sysdeps/unix/sysv/linux/tst-clone2.c It may make sense to update the file comment. > - pid_t pid = THREAD_GETMEM (THREAD_SELF, pid); > - pid_t tid = THREAD_GETMEM (THREAD_SELF, tid); > + /* Clone without flags do not cache the pid and tid is only set in thread “does not cache”. But the comment seems outdated? > + creation by using CLONE_PARENT_SETTID plus pthread tid field address. > + So to actually get all parent's pid and own pid/tid it requires to use > + the syscalls. */ > + pid_t ppid = getppid (); > + pid_t pid = getpid (); > + pid_t tid = syscall (__NR_gettid); > > + while (write (pipefd[1], &ppid, sizeof ppid) < 0) > + continue; > while (write (pipefd[1], &pid, sizeof pid) < 0) > continue; > while (write (pipefd[1], &tid, sizeof tid) < 0) These while loops look incorrect. Perhaps just fail the test if the result is not equal to sizeof of the value being written? > + /* Some sanity checks for clone syscall: returned ppid should be currernt “current” Thanks, Florian
diff --git a/nptl/allocatestack.c b/nptl/allocatestack.c index 3016a2e..98a0ea2 100644 --- a/nptl/allocatestack.c +++ b/nptl/allocatestack.c @@ -438,9 +438,6 @@ allocate_stack (const struct pthread_attr *attr, struct pthread **pdp, SETUP_THREAD_SYSINFO (pd); #endif - /* The process ID is also the same as that of the caller. */ - pd->pid = THREAD_GETMEM (THREAD_SELF, pid); - /* Don't allow setxid until cloned. */ pd->setxid_futex = -1; @@ -577,9 +574,6 @@ allocate_stack (const struct pthread_attr *attr, struct pthread **pdp, /* Don't allow setxid until cloned. */ pd->setxid_futex = -1; - /* The process ID is also the same as that of the caller. */ - pd->pid = THREAD_GETMEM (THREAD_SELF, pid); - /* Allocate the DTV for this thread. */ if (_dl_allocate_tls (TLS_TPADJ (pd)) == NULL) { @@ -873,9 +867,6 @@ __reclaim_stacks (void) /* This marks the stack as free. */ curp->tid = 0; - /* The PID field must be initialized for the new process. */ - curp->pid = self->pid; - /* Account for the size of the stack. */ stack_cache_actsize += curp->stackblock_size; @@ -901,13 +892,6 @@ __reclaim_stacks (void) } } - /* Reset the PIDs in any cached stacks. */ - list_for_each (runp, &stack_cache) - { - struct pthread *curp = list_entry (runp, struct pthread, list); - curp->pid = self->pid; - } - /* Add the stack of all running threads to the cache. */ list_splice (&stack_used, &stack_cache); @@ -1052,9 +1036,9 @@ setxid_signal_thread (struct xid_command *cmdp, struct pthread *t) return 0; int val; + pid_t pid = __getpid (); INTERNAL_SYSCALL_DECL (err); - val = INTERNAL_SYSCALL (tgkill, err, 3, THREAD_GETMEM (THREAD_SELF, pid), - t->tid, SIGSETXID); + val = INTERNAL_SYSCALL_CALL (tgkill, err, pid, t->tid, SIGSETXID); /* If this failed, it must have had not started yet or else exited. */ if (!INTERNAL_SYSCALL_ERROR_P (val, err)) diff --git a/nptl/descr.h b/nptl/descr.h index 8e4938d..17a2c9f 100644 --- a/nptl/descr.h +++ b/nptl/descr.h @@ -167,7 +167,7 @@ struct pthread therefore stack) used' flag. */ pid_t tid; - /* Process ID - thread group ID in kernel speak. */ + /* Ununsed. */ pid_t pid; /* List of robust mutexes the thread is holding. */ diff --git a/nptl/nptl-init.c b/nptl/nptl-init.c index bdbdfed..48fab50 100644 --- a/nptl/nptl-init.c +++ b/nptl/nptl-init.c @@ -184,18 +184,12 @@ __nptl_set_robust (struct pthread *self) static void sigcancel_handler (int sig, siginfo_t *si, void *ctx) { - /* Determine the process ID. It might be negative if the thread is - in the middle of a fork() call. */ - pid_t pid = THREAD_GETMEM (THREAD_SELF, pid); - if (__glibc_unlikely (pid < 0)) - pid = -pid; - /* Safety check. It would be possible to call this function for other signals and send a signal from another process. This is not correct and might even be a security problem. Try to catch as many incorrect invocations as possible. */ if (sig != SIGCANCEL - || si->si_pid != pid + || si->si_pid != __getpid() || si->si_code != SI_TKILL) return; @@ -243,19 +237,14 @@ struct xid_command *__xidcmd attribute_hidden; static void sighandler_setxid (int sig, siginfo_t *si, void *ctx) { - /* Determine the process ID. It might be negative if the thread is - in the middle of a fork() call. */ - pid_t pid = THREAD_GETMEM (THREAD_SELF, pid); int result; - if (__glibc_unlikely (pid < 0)) - pid = -pid; /* Safety check. It would be possible to call this function for other signals and send a signal from another process. This is not correct and might even be a security problem. Try to catch as many incorrect invocations as possible. */ if (sig != SIGSETXID - || si->si_pid != pid + || si->si_pid != __getpid () || si->si_code != SI_TKILL) return; diff --git a/nptl/pthread_cancel.c b/nptl/pthread_cancel.c index 1419baf..89d02e1 100644 --- a/nptl/pthread_cancel.c +++ b/nptl/pthread_cancel.c @@ -22,7 +22,7 @@ #include "pthreadP.h" #include <atomic.h> #include <sysdep.h> - +#include <unistd.h> int pthread_cancel (pthread_t th) @@ -66,19 +66,11 @@ pthread_cancel (pthread_t th) #ifdef SIGCANCEL /* The cancellation handler will take care of marking the thread as canceled. */ - INTERNAL_SYSCALL_DECL (err); - - /* One comment: The PID field in the TCB can temporarily be - changed (in fork). But this must not affect this code - here. Since this function would have to be called while - the thread is executing fork, it would have to happen in - a signal handler. But this is no allowed, pthread_cancel - is not guaranteed to be async-safe. */ - int val; - val = INTERNAL_SYSCALL (tgkill, err, 3, - THREAD_GETMEM (THREAD_SELF, pid), pd->tid, - SIGCANCEL); + pid_t pid = getpid (); + INTERNAL_SYSCALL_DECL (err); + int val = INTERNAL_SYSCALL_CALL (tgkill, err, pid, pd->tid, + SIGCANCEL); if (INTERNAL_SYSCALL_ERROR_P (val, err)) result = INTERNAL_SYSCALL_ERRNO (val, err); #else diff --git a/nptl/pthread_getattr_np.c b/nptl/pthread_getattr_np.c index fb906f0..32d7484 100644 --- a/nptl/pthread_getattr_np.c +++ b/nptl/pthread_getattr_np.c @@ -68,7 +68,6 @@ pthread_getattr_np (pthread_t thread_id, pthread_attr_t *attr) { /* No stack information available. This must be for the initial thread. Get the info in some magical way. */ - assert (abs (thread->pid) == thread->tid); /* Stack size limit. */ struct rlimit rl; diff --git a/nptl_db/td_ta_thr_iter.c b/nptl_db/td_ta_thr_iter.c index a990fed..9e50599 100644 --- a/nptl_db/td_ta_thr_iter.c +++ b/nptl_db/td_ta_thr_iter.c @@ -76,48 +76,28 @@ iterate_thread_list (td_thragent_t *ta, td_thr_iter_f *callback, if (ps_pdread (ta->ph, addr, copy, ta->ta_sizeof_pthread) != PS_OK) return TD_ERR; - /* Verify that this thread's pid field matches the child PID. - If its pid field is negative, it's about to do a fork or it - is the sole thread in a fork child. */ - psaddr_t pid; - err = DB_GET_FIELD_LOCAL (pid, ta, copy, pthread, pid, 0); - if (err == TD_OK && (pid_t) (uintptr_t) pid < 0) - { - if (-(pid_t) (uintptr_t) pid == match_pid) - /* It is about to do a fork, but is really still the parent PID. */ - pid = (psaddr_t) (uintptr_t) match_pid; - else - /* It must be a fork child, whose new PID is in the tid field. */ - err = DB_GET_FIELD_LOCAL (pid, ta, copy, pthread, tid, 0); - } + err = DB_GET_FIELD_LOCAL (schedpolicy, ta, copy, pthread, + schedpolicy, 0); if (err != TD_OK) break; + err = DB_GET_FIELD_LOCAL (schedprio, ta, copy, pthread, + schedparam_sched_priority, 0); + if (err != TD_OK) + break; + + /* Now test whether this thread matches the specified conditions. */ - if ((pid_t) (uintptr_t) pid == match_pid) + /* Only if the priority level is as high or higher. */ + int descr_pri = ((uintptr_t) schedpolicy == SCHED_OTHER + ? 0 : (uintptr_t) schedprio); + if (descr_pri >= ti_pri) { - err = DB_GET_FIELD_LOCAL (schedpolicy, ta, copy, pthread, - schedpolicy, 0); - if (err != TD_OK) - break; - err = DB_GET_FIELD_LOCAL (schedprio, ta, copy, pthread, - schedparam_sched_priority, 0); - if (err != TD_OK) - break; - - /* Now test whether this thread matches the specified conditions. */ - - /* Only if the priority level is as high or higher. */ - int descr_pri = ((uintptr_t) schedpolicy == SCHED_OTHER - ? 0 : (uintptr_t) schedprio); - if (descr_pri >= ti_pri) - { - /* Yep, it matches. Call the callback function. */ - td_thrhandle_t th; - th.th_ta_p = (td_thragent_t *) ta; - th.th_unique = addr; - if (callback (&th, cbdata_p) != 0) - return TD_DBERR; - } + /* Yep, it matches. Call the callback function. */ + td_thrhandle_t th; + th.th_ta_p = (td_thragent_t *) ta; + th.th_unique = addr; + if (callback (&th, cbdata_p) != 0) + return TD_DBERR; } /* Get the pointer to the next element. */ diff --git a/nptl_db/td_thr_validate.c b/nptl_db/td_thr_validate.c index f3c8a7b..9b89fec 100644 --- a/nptl_db/td_thr_validate.c +++ b/nptl_db/td_thr_validate.c @@ -80,28 +80,5 @@ td_thr_validate (const td_thrhandle_t *th) err = TD_OK; } - if (err == TD_OK) - { - /* Verify that this is not a stale element in a fork child. */ - pid_t match_pid = ps_getpid (th->th_ta_p->ph); - psaddr_t pid; - err = DB_GET_FIELD (pid, th->th_ta_p, th->th_unique, pthread, pid, 0); - if (err == TD_OK && (pid_t) (uintptr_t) pid < 0) - { - /* This was a thread that was about to fork, or it is the new sole - thread in a fork child. In the latter case, its tid was stored - via CLONE_CHILD_SETTID and so is already the proper child PID. */ - if (-(pid_t) (uintptr_t) pid == match_pid) - /* It is about to do a fork, but is really still the parent PID. */ - pid = (psaddr_t) (uintptr_t) match_pid; - else - /* It must be a fork child, whose new PID is in the tid field. */ - err = DB_GET_FIELD (pid, th->th_ta_p, th->th_unique, - pthread, tid, 0); - } - if (err == TD_OK && (pid_t) (uintptr_t) pid != match_pid) - err = TD_NOTHR; - } - return err; } diff --git a/sysdeps/aarch64/nptl/tcb-offsets.sym b/sysdeps/aarch64/nptl/tcb-offsets.sym index 0677aea..238647d 100644 --- a/sysdeps/aarch64/nptl/tcb-offsets.sym +++ b/sysdeps/aarch64/nptl/tcb-offsets.sym @@ -2,6 +2,5 @@ #include <tls.h> PTHREAD_MULTIPLE_THREADS_OFFSET offsetof (struct pthread, header.multiple_threads) -PTHREAD_PID_OFFSET offsetof (struct pthread, pid) PTHREAD_TID_OFFSET offsetof (struct pthread, tid) PTHREAD_SIZEOF sizeof (struct pthread) diff --git a/sysdeps/alpha/nptl/tcb-offsets.sym b/sysdeps/alpha/nptl/tcb-offsets.sym index c21a791..1005621 100644 --- a/sysdeps/alpha/nptl/tcb-offsets.sym +++ b/sysdeps/alpha/nptl/tcb-offsets.sym @@ -10,5 +10,4 @@ #define thread_offsetof(mem) (long)(offsetof(struct pthread, mem) - sizeof(struct pthread)) MULTIPLE_THREADS_OFFSET thread_offsetof (header.multiple_threads) -PID_OFFSET thread_offsetof (pid) TID_OFFSET thread_offsetof (tid) diff --git a/sysdeps/arm/nptl/tcb-offsets.sym b/sysdeps/arm/nptl/tcb-offsets.sym index 92cc441..bf9c0a1 100644 --- a/sysdeps/arm/nptl/tcb-offsets.sym +++ b/sysdeps/arm/nptl/tcb-offsets.sym @@ -7,5 +7,4 @@ #define thread_offsetof(mem) (long)(offsetof(struct pthread, mem) - sizeof(struct pthread)) MULTIPLE_THREADS_OFFSET thread_offsetof (header.multiple_threads) -PID_OFFSET thread_offsetof (pid) TID_OFFSET thread_offsetof (tid) diff --git a/sysdeps/hppa/nptl/tcb-offsets.sym b/sysdeps/hppa/nptl/tcb-offsets.sym index c2f326e..6eeed4cb 100644 --- a/sysdeps/hppa/nptl/tcb-offsets.sym +++ b/sysdeps/hppa/nptl/tcb-offsets.sym @@ -3,7 +3,6 @@ RESULT offsetof (struct pthread, result) TID offsetof (struct pthread, tid) -PID offsetof (struct pthread, pid) CANCELHANDLING offsetof (struct pthread, cancelhandling) CLEANUP_JMP_BUF offsetof (struct pthread, cleanup_jmp_buf) MULTIPLE_THREADS_OFFSET offsetof (struct pthread, header.multiple_threads) diff --git a/sysdeps/i386/nptl/tcb-offsets.sym b/sysdeps/i386/nptl/tcb-offsets.sym index 7bdf161..695a810 100644 --- a/sysdeps/i386/nptl/tcb-offsets.sym +++ b/sysdeps/i386/nptl/tcb-offsets.sym @@ -4,7 +4,6 @@ RESULT offsetof (struct pthread, result) TID offsetof (struct pthread, tid) -PID offsetof (struct pthread, pid) CANCELHANDLING offsetof (struct pthread, cancelhandling) CLEANUP_JMP_BUF offsetof (struct pthread, cleanup_jmp_buf) MULTIPLE_THREADS_OFFSET offsetof (tcbhead_t, multiple_threads) diff --git a/sysdeps/ia64/nptl/tcb-offsets.sym b/sysdeps/ia64/nptl/tcb-offsets.sym index e1707ab..b01f712 100644 --- a/sysdeps/ia64/nptl/tcb-offsets.sym +++ b/sysdeps/ia64/nptl/tcb-offsets.sym @@ -1,7 +1,6 @@ #include <sysdep.h> #include <tls.h> -PID offsetof (struct pthread, pid) - TLS_PRE_TCB_SIZE TID offsetof (struct pthread, tid) - TLS_PRE_TCB_SIZE MULTIPLE_THREADS_OFFSET offsetof (struct pthread, header.multiple_threads) - TLS_PRE_TCB_SIZE SYSINFO_OFFSET offsetof (tcbhead_t, __private) diff --git a/sysdeps/m68k/nptl/tcb-offsets.sym b/sysdeps/m68k/nptl/tcb-offsets.sym index b1bba65..241fb8b 100644 --- a/sysdeps/m68k/nptl/tcb-offsets.sym +++ b/sysdeps/m68k/nptl/tcb-offsets.sym @@ -7,5 +7,4 @@ #define thread_offsetof(mem) (long)(offsetof(struct pthread, mem) - TLS_TCB_OFFSET - TLS_PRE_TCB_SIZE) MULTIPLE_THREADS_OFFSET thread_offsetof (header.multiple_threads) -PID_OFFSET thread_offsetof (pid) TID_OFFSET thread_offsetof (tid) diff --git a/sysdeps/microblaze/nptl/tcb-offsets.sym b/sysdeps/microblaze/nptl/tcb-offsets.sym index 18afbee..614f0df 100644 --- a/sysdeps/microblaze/nptl/tcb-offsets.sym +++ b/sysdeps/microblaze/nptl/tcb-offsets.sym @@ -7,5 +7,4 @@ #define thread_offsetof(mem) (long)(offsetof (struct pthread, mem) - sizeof (struct pthread)) MULTIPLE_THREADS_OFFSET thread_offsetof (header.multiple_threads) -PID_OFFSET thread_offsetof (pid) TID_OFFSET thread_offsetof (tid) diff --git a/sysdeps/mips/nptl/tcb-offsets.sym b/sysdeps/mips/nptl/tcb-offsets.sym index e0e71dc..9ea25b9 100644 --- a/sysdeps/mips/nptl/tcb-offsets.sym +++ b/sysdeps/mips/nptl/tcb-offsets.sym @@ -7,5 +7,4 @@ #define thread_offsetof(mem) (long)(offsetof(struct pthread, mem) - TLS_TCB_OFFSET - TLS_PRE_TCB_SIZE) MULTIPLE_THREADS_OFFSET thread_offsetof (header.multiple_threads) -PID_OFFSET thread_offsetof (pid) TID_OFFSET thread_offsetof (tid) diff --git a/sysdeps/nios2/nptl/tcb-offsets.sym b/sysdeps/nios2/nptl/tcb-offsets.sym index d9ae952..3cd8d98 100644 --- a/sysdeps/nios2/nptl/tcb-offsets.sym +++ b/sysdeps/nios2/nptl/tcb-offsets.sym @@ -9,6 +9,5 @@ # define thread_offsetof(mem) ((ptrdiff_t) THREAD_SELF + offsetof (struct pthread, mem)) MULTIPLE_THREADS_OFFSET thread_offsetof (header.multiple_threads) -PID_OFFSET thread_offsetof (pid) TID_OFFSET thread_offsetof (tid) POINTER_GUARD (offsetof (tcbhead_t, pointer_guard) - TLS_TCB_OFFSET - sizeof (tcbhead_t)) diff --git a/sysdeps/nptl/fork.c b/sysdeps/nptl/fork.c index ea135f8..168b2ad 100644 --- a/sysdeps/nptl/fork.c +++ b/sysdeps/nptl/fork.c @@ -135,12 +135,6 @@ __libc_fork (void) pid_t ppid = THREAD_GETMEM (THREAD_SELF, tid); #endif - /* We need to prevent the getpid() code to update the PID field so - that, if a signal arrives in the child very early and the signal - handler uses getpid(), the value returned is correct. */ - pid_t parentpid = THREAD_GETMEM (THREAD_SELF, pid); - THREAD_SETMEM (THREAD_SELF, pid, -parentpid); - #ifdef ARCH_FORK pid = ARCH_FORK (); #else @@ -159,9 +153,6 @@ __libc_fork (void) if (__fork_generation_pointer != NULL) *__fork_generation_pointer += __PTHREAD_ONCE_FORK_GEN_INCR; - /* Adjust the PID field for the new process. */ - THREAD_SETMEM (self, pid, THREAD_GETMEM (self, tid)); - #if HP_TIMING_AVAIL /* The CPU clock of the thread and process have to be set to zero. */ hp_timing_t now; @@ -231,11 +222,6 @@ __libc_fork (void) } else { - assert (THREAD_GETMEM (THREAD_SELF, tid) == ppid); - - /* Restore the PID value. */ - THREAD_SETMEM (THREAD_SELF, pid, parentpid); - /* Release acquired locks in the multi-threaded case. */ if (multiple_threads) { diff --git a/sysdeps/powerpc/nptl/tcb-offsets.sym b/sysdeps/powerpc/nptl/tcb-offsets.sym index f580e69..7c9fd33 100644 --- a/sysdeps/powerpc/nptl/tcb-offsets.sym +++ b/sysdeps/powerpc/nptl/tcb-offsets.sym @@ -13,7 +13,6 @@ #if TLS_MULTIPLE_THREADS_IN_TCB MULTIPLE_THREADS_OFFSET thread_offsetof (header.multiple_threads) #endif -PID thread_offsetof (pid) TID thread_offsetof (tid) POINTER_GUARD (offsetof (tcbhead_t, pointer_guard) - TLS_TCB_OFFSET - sizeof (tcbhead_t)) TAR_SAVE (offsetof (tcbhead_t, tar_save) - TLS_TCB_OFFSET - sizeof (tcbhead_t)) diff --git a/sysdeps/s390/nptl/tcb-offsets.sym b/sysdeps/s390/nptl/tcb-offsets.sym index 9cfae21..9c1c01f 100644 --- a/sysdeps/s390/nptl/tcb-offsets.sym +++ b/sysdeps/s390/nptl/tcb-offsets.sym @@ -3,5 +3,4 @@ MULTIPLE_THREADS_OFFSET offsetof (tcbhead_t, multiple_threads) STACK_GUARD offsetof (tcbhead_t, stack_guard) -PID offsetof (struct pthread, pid) TID offsetof (struct pthread, tid) diff --git a/sysdeps/sh/nptl/tcb-offsets.sym b/sysdeps/sh/nptl/tcb-offsets.sym index ac63b5b..4963e15 100644 --- a/sysdeps/sh/nptl/tcb-offsets.sym +++ b/sysdeps/sh/nptl/tcb-offsets.sym @@ -4,7 +4,6 @@ RESULT offsetof (struct pthread, result) TID offsetof (struct pthread, tid) -PID offsetof (struct pthread, pid) CANCELHANDLING offsetof (struct pthread, cancelhandling) CLEANUP_JMP_BUF offsetof (struct pthread, cleanup_jmp_buf) MULTIPLE_THREADS_OFFSET offsetof (struct pthread, header.multiple_threads) diff --git a/sysdeps/sparc/nptl/tcb-offsets.sym b/sysdeps/sparc/nptl/tcb-offsets.sym index 923af8a..f75d020 100644 --- a/sysdeps/sparc/nptl/tcb-offsets.sym +++ b/sysdeps/sparc/nptl/tcb-offsets.sym @@ -3,5 +3,4 @@ MULTIPLE_THREADS_OFFSET offsetof (tcbhead_t, multiple_threads) POINTER_GUARD offsetof (tcbhead_t, pointer_guard) -PID offsetof (struct pthread, pid) TID offsetof (struct pthread, tid) diff --git a/sysdeps/tile/nptl/tcb-offsets.sym b/sysdeps/tile/nptl/tcb-offsets.sym index 6740bc9..0147ffa 100644 --- a/sysdeps/tile/nptl/tcb-offsets.sym +++ b/sysdeps/tile/nptl/tcb-offsets.sym @@ -9,7 +9,6 @@ #define thread_offsetof(mem) (long)(offsetof(struct pthread, mem) - TLS_TCB_OFFSET - TLS_PRE_TCB_SIZE) MULTIPLE_THREADS_OFFSET thread_offsetof (header.multiple_threads) -PID_OFFSET thread_offsetof (pid) TID_OFFSET thread_offsetof (tid) POINTER_GUARD (offsetof (tcbhead_t, pointer_guard) - TLS_TCB_OFFSET - sizeof (tcbhead_t)) FEEDBACK_DATA_OFFSET (offsetof (tcbhead_t, feedback_data) - TLS_TCB_OFFSET - sizeof (tcbhead_t)) diff --git a/sysdeps/unix/sysv/linux/aarch64/clone.S b/sysdeps/unix/sysv/linux/aarch64/clone.S index 76baa7a..96482e5 100644 --- a/sysdeps/unix/sysv/linux/aarch64/clone.S +++ b/sysdeps/unix/sysv/linux/aarch64/clone.S @@ -72,16 +72,6 @@ thread_start: cfi_undefined (x30) mov x29, 0 - tbnz x11, #CLONE_VM_BIT, 1f - - mov x8, #SYS_ify(getpid) - svc 0x0 - mrs x1, tpidr_el0 - sub x1, x1, #PTHREAD_SIZEOF - str w0, [x1, #PTHREAD_PID_OFFSET] - str w0, [x1, #PTHREAD_TID_OFFSET] -1: - /* Pick the function arg and execute. */ mov x0, x12 blr x10 diff --git a/sysdeps/unix/sysv/linux/aarch64/vfork.S b/sysdeps/unix/sysv/linux/aarch64/vfork.S index 577895e..aeed0b2 100644 --- a/sysdeps/unix/sysv/linux/aarch64/vfork.S +++ b/sysdeps/unix/sysv/linux/aarch64/vfork.S @@ -27,27 +27,10 @@ ENTRY (__vfork) - /* Save the TCB-cached PID away in w3, and then negate the TCB - field. But if it's zero, set it to 0x80000000 instead. See - raise.c for the logic that relies on this value. */ - mrs x2, tpidr_el0 - sub x2, x2, #PTHREAD_SIZEOF - ldr w3, [x2, #PTHREAD_PID_OFFSET] - mov w1, #0x80000000 - negs w0, w3 - csel w0, w1, w0, eq - str w0, [x2, #PTHREAD_PID_OFFSET] - mov x0, #0x4111 /* CLONE_VM | CLONE_VFORK | SIGCHLD */ mov x1, sp DO_CALL (clone, 2) - /* Restore the original value of the TCB cache of the PID, if we're - the parent. But in the child (syscall return value equals zero), - leave things as they are. */ - cbz x0, 1f - str w3, [x2, #PTHREAD_PID_OFFSET] -1: cmn x0, #4095 b.cs .Lsyscall_error RET diff --git a/sysdeps/unix/sysv/linux/alpha/clone.S b/sysdeps/unix/sysv/linux/alpha/clone.S index 6a3154f..2757bf2 100644 --- a/sysdeps/unix/sysv/linux/alpha/clone.S +++ b/sysdeps/unix/sysv/linux/alpha/clone.S @@ -91,13 +91,6 @@ thread_start: cfi_def_cfa_register(fp) cfi_undefined(ra) - /* Check and see if we need to reset the PID. */ - ldq t0, 16(sp) - lda t1, CLONE_VM - and t0, t1, t2 - beq t2, 2f -1: - /* Load up the arguments. */ ldq pv, 0(sp) ldq a0, 8(sp) @@ -120,15 +113,6 @@ thread_start: halt .align 4 -2: - rduniq - mov v0, s0 - lda v0, __NR_getxpid - callsys -3: - stl v0, PID_OFFSET(s0) - stl v0, TID_OFFSET(s0) - br 1b cfi_endproc .end thread_start diff --git a/sysdeps/unix/sysv/linux/alpha/vfork.S b/sysdeps/unix/sysv/linux/alpha/vfork.S index 9fc199a..e5f7ed0 100644 --- a/sysdeps/unix/sysv/linux/alpha/vfork.S +++ b/sysdeps/unix/sysv/linux/alpha/vfork.S @@ -25,24 +25,9 @@ ENTRY(__libc_vfork) rduniq mov v0, a1 - /* Save the TCB-cached PID away in A2, and then negate the TCB - field. But if it's zero, set it to 0x80000000 instead. See - raise.c for the logic that relies on this value. */ - ldl a2, PID_OFFSET(v0) - ldah t0, -0x8000 - negl a2, t1 - cmovne a2, t1, t0 - stl t0, PID_OFFSET(v0); - lda v0, SYS_ify(vfork) call_pal PAL_callsys - /* Restore the original value of the TCB cache of the PID, if we're - the parent. But in the child (syscall return value equals zero), - leave things as they are. */ - beq v0, 1f - stl a2, PID_OFFSET(a1) -1: /* Normal error check and return. */ bne a3, SYSCALL_ERROR_LABEL ret diff --git a/sysdeps/unix/sysv/linux/arm/clone.S b/sysdeps/unix/sysv/linux/arm/clone.S index 7ff6818..4c6325d 100644 --- a/sysdeps/unix/sysv/linux/arm/clone.S +++ b/sysdeps/unix/sysv/linux/arm/clone.S @@ -70,16 +70,6 @@ PSEUDO_END (__clone) 1: .fnstart .cantunwind - tst ip, #CLONE_VM - bne 2f - GET_TLS (lr) - mov r1, r0 - ldr r7, =SYS_ify(getpid) - swi 0x0 - NEGOFF_ADJ_BASE (r1, TID_OFFSET) - str r0, NEGOFF_OFF1 (r1, TID_OFFSET) - str r0, NEGOFF_OFF2 (r1, PID_OFFSET, TID_OFFSET) -2: @ pick the function arg and call address off the stack and execute ldr r0, [sp, #4] ldr ip, [sp], #8 diff --git a/sysdeps/unix/sysv/linux/arm/vfork.S b/sysdeps/unix/sysv/linux/arm/vfork.S index 500f5ca..794372e 100644 --- a/sysdeps/unix/sysv/linux/arm/vfork.S +++ b/sysdeps/unix/sysv/linux/arm/vfork.S @@ -28,16 +28,6 @@ and the process ID of the new process to the old process. */ ENTRY (__vfork) - /* Save the PID value. */ - GET_TLS (r2) - NEGOFF_ADJ_BASE2 (r2, r0, PID_OFFSET) /* Save the TLS addr in r2. */ - ldr r3, NEGOFF_OFF1 (r2, PID_OFFSET) /* Load the saved PID. */ - rsbs r0, r3, #0 /* Negate it, and test for zero. */ - /* Use 0x80000000 if it was 0. See raise.c for how this is used. */ - it eq - moveq r0, #0x80000000 - str r0, NEGOFF_OFF1 (r2, PID_OFFSET) /* Store the temp PID. */ - /* The DO_CALL macro saves r7 on the stack, to enable generation of ARM unwind info. Since the stack is initially shared between parent and child of vfork, that saved value could be corrupted. @@ -57,11 +47,6 @@ ENTRY (__vfork) mov r7, ip cfi_restore (r7) - /* Restore the old PID value in the parent. */ - cmp r0, #0 /* If we are the parent... */ - it ne - strne r3, NEGOFF_OFF1 (r2, PID_OFFSET) /* restore the saved PID. */ - cmn a1, #4096 it cc RETINSTR(cc, lr) diff --git a/sysdeps/unix/sysv/linux/createthread.c b/sysdeps/unix/sysv/linux/createthread.c index 6d32cec..ec86f50 100644 --- a/sysdeps/unix/sysv/linux/createthread.c +++ b/sysdeps/unix/sysv/linux/createthread.c @@ -128,10 +128,10 @@ create_thread (struct pthread *pd, const struct pthread_attr *attr, /* The operation failed. We have to kill the thread. We let the normal cancellation mechanism do the work. */ + pid_t pid = __getpid (); INTERNAL_SYSCALL_DECL (err2); - (void) INTERNAL_SYSCALL (tgkill, err2, 3, - THREAD_GETMEM (THREAD_SELF, pid), - pd->tid, SIGCANCEL); + (void) INTERNAL_SYSCALL_CALL (tgkill, err2, pid, pd->tid, + SIGCANCEL); return INTERNAL_SYSCALL_ERRNO (res, err); } diff --git a/sysdeps/unix/sysv/linux/getpid.c b/sysdeps/unix/sysv/linux/getpid.c index 1124549..2bfafed 100644 --- a/sysdeps/unix/sysv/linux/getpid.c +++ b/sysdeps/unix/sysv/linux/getpid.c @@ -20,43 +20,11 @@ #include <tls.h> #include <sysdep.h> - -#if IS_IN (libc) -static inline __attribute__((always_inline)) pid_t really_getpid (pid_t oldval); - -static inline __attribute__((always_inline)) pid_t -really_getpid (pid_t oldval) -{ - if (__glibc_likely (oldval == 0)) - { - pid_t selftid = THREAD_GETMEM (THREAD_SELF, tid); - if (__glibc_likely (selftid != 0)) - return selftid; - } - - INTERNAL_SYSCALL_DECL (err); - pid_t result = INTERNAL_SYSCALL (getpid, err, 0); - - /* We do not set the PID field in the TID here since we might be - called from a signal handler while the thread executes fork. */ - if (oldval == 0) - THREAD_SETMEM (THREAD_SELF, tid, result); - return result; -} -#endif - pid_t __getpid (void) { -#if !IS_IN (libc) INTERNAL_SYSCALL_DECL (err); - pid_t result = INTERNAL_SYSCALL (getpid, err, 0); -#else - pid_t result = THREAD_GETMEM (THREAD_SELF, pid); - if (__glibc_unlikely (result <= 0)) - result = really_getpid (result); -#endif - return result; + return INTERNAL_SYSCALL_CALL (getpid, err); } libc_hidden_def (__getpid) diff --git a/sysdeps/unix/sysv/linux/hppa/clone.S b/sysdeps/unix/sysv/linux/hppa/clone.S index 3d037f1..25fcd49 100644 --- a/sysdeps/unix/sysv/linux/hppa/clone.S +++ b/sysdeps/unix/sysv/linux/hppa/clone.S @@ -132,18 +132,6 @@ ENTRY(__clone) ldwm -64(%sp), %r4 .LthreadStart: -# define CLONE_VM_BIT 23 /* 0x00000100 */ - /* Load original clone flags. - If CLONE_VM was passed, don't modify PID/TID. - Otherwise store the result of getpid to PID/TID. */ - ldw -56(%sp), %r26 - bb,<,n %r26, CLONE_VM_BIT, 1f - ble 0x100(%sr2, %r0) - ldi __NR_getpid, %r20 - mfctl %cr27, %r26 - stw %ret0, PID_THREAD_OFFSET(%r26) - stw %ret0, TID_THREAD_OFFSET(%r26) -1: /* Load up the arguments. */ ldw -60(%sp), %arg0 ldw -64(%sp), %r22 diff --git a/sysdeps/unix/sysv/linux/i386/clone.S b/sysdeps/unix/sysv/linux/i386/clone.S index 25f2a9c..feae504 100644 --- a/sysdeps/unix/sysv/linux/i386/clone.S +++ b/sysdeps/unix/sysv/linux/i386/clone.S @@ -107,9 +107,6 @@ L(thread_start): cfi_undefined (eip); /* Note: %esi is zero. */ movl %esi,%ebp /* terminate the stack frame */ - testl $CLONE_VM, %edi - je L(newpid) -L(haspid): call *%ebx #ifdef PIC call L(here) @@ -121,18 +118,6 @@ L(here): movl $SYS_ify(exit), %eax ENTER_KERNEL - .subsection 2 -L(newpid): - movl $SYS_ify(getpid), %eax - ENTER_KERNEL -L(nomoregetpid): - movl %eax, %gs:PID - movl %eax, %gs:TID - jmp L(haspid) - .previous - cfi_endproc; - - cfi_startproc PSEUDO_END (__clone) libc_hidden_def (__clone) diff --git a/sysdeps/unix/sysv/linux/i386/vfork.S b/sysdeps/unix/sysv/linux/i386/vfork.S index 7a1d337..a865de2 100644 --- a/sysdeps/unix/sysv/linux/i386/vfork.S +++ b/sysdeps/unix/sysv/linux/i386/vfork.S @@ -34,17 +34,6 @@ ENTRY (__vfork) cfi_adjust_cfa_offset (-4) cfi_register (%eip, %ecx) - /* Save the TCB-cached PID away in %edx, and then negate the TCB - field. But if it's zero, set it to 0x80000000 instead. See - raise.c for the logic that relies on this value. */ - movl %gs:PID, %edx - movl %edx, %eax - negl %eax - jne 1f - movl $0x80000000, %eax -1: movl %eax, %gs:PID - - /* Stuff the syscall number in EAX and enter into the kernel. */ movl $SYS_ify (vfork), %eax int $0x80 @@ -55,14 +44,6 @@ ENTRY (__vfork) pushl %ecx cfi_adjust_cfa_offset (4) - /* Restore the original value of the TCB cache of the PID, if we're - the parent. But in the child (syscall return value equals zero), - leave things as they are. */ - testl %eax, %eax - je 1f - movl %edx, %gs:PID -1: - cmpl $-4095, %eax /* Branch forward if it failed. */ jae SYSCALL_ERROR_LABEL diff --git a/sysdeps/unix/sysv/linux/ia64/clone2.S b/sysdeps/unix/sysv/linux/ia64/clone2.S index b4cfdfc..e637b6d 100644 --- a/sysdeps/unix/sysv/linux/ia64/clone2.S +++ b/sysdeps/unix/sysv/linux/ia64/clone2.S @@ -67,19 +67,7 @@ ENTRY(__clone2) (CHILD) mov loc0=gp (PARENT) ret ;; - tbit.nz p6,p0=in3,8 /* CLONE_VM */ -(p6) br.cond.dptk 1f - ;; - mov r15=SYS_ify (getpid) -(p7) break __BREAK_SYSCALL - ;; - add r9=PID,r13 - add r10=TID,r13 - ;; - st4 [r9]=r8 - st4 [r10]=r8 - ;; -1: ld8 out1=[in0],8 /* Retrieve code pointer. */ + ld8 out1=[in0],8 /* Retrieve code pointer. */ mov out0=in4 /* Pass proper argument to fn */ ;; ld8 gp=[in0] /* Load function gp. */ diff --git a/sysdeps/unix/sysv/linux/ia64/vfork.S b/sysdeps/unix/sysv/linux/ia64/vfork.S index 9154d7c..84bfdd5 100644 --- a/sysdeps/unix/sysv/linux/ia64/vfork.S +++ b/sysdeps/unix/sysv/linux/ia64/vfork.S @@ -33,32 +33,12 @@ ENTRY (__libc_vfork) .prologue // work around a GAS bug which triggers if .body // first .prologue is not at the beginning of proc. alloc r2=ar.pfs,0,0,2,0 - adds r14=PID,r13 - ;; - ld4 r16=[r14] - ;; - sub r15=0,r16 - cmp.eq p6,p0=0,r16 - ;; -(p6) movl r15=0x80000000 mov out0=CLONE_VM+CLONE_VFORK+SIGCHLD mov out1=0 /* Standard sp value. */ ;; - st4 [r14]=r15 DO_CALL (SYS_ify (clone)) cmp.eq p6,p0=0,r8 - adds r14=PID,r13 (p6) br.cond.dptk 1f - ;; - ld4 r15=[r14] - ;; - extr.u r16=r15,0,31 - ;; - cmp.eq p0,p6=0,r16 - ;; -(p6) sub r16=0,r15 - ;; - st4 [r14]=r16 1: cmp.eq p6,p0=-1,r10 (p6) br.cond.spnt.few __syscall_error diff --git a/sysdeps/unix/sysv/linux/m68k/clone.S b/sysdeps/unix/sysv/linux/m68k/clone.S index 3a82844..630a292 100644 --- a/sysdeps/unix/sysv/linux/m68k/clone.S +++ b/sysdeps/unix/sysv/linux/m68k/clone.S @@ -98,19 +98,6 @@ ENTRY (__clone) cfi_startproc cfi_undefined (pc) /* Mark end of stack */ subl %fp, %fp /* terminate the stack frame */ - /* Check and see if we need to reset the PID. */ - andl #CLONE_VM, %d1 - jne 1f - movel #SYS_ify (getpid), %d0 - trap #0 - movel %a0, -(%sp) - movel %d0, -(%sp) - bsrl __m68k_read_tp@PLTPC - movel (%sp)+, %d0 - movel %d0, PID_OFFSET(%a0) - movel %d0, TID_OFFSET(%a0) - movel (%sp)+, %a0 -1: jsr (%a0) movel %d0, %d1 movel #SYS_ify (exit), %d0 diff --git a/sysdeps/unix/sysv/linux/m68k/vfork.S b/sysdeps/unix/sysv/linux/m68k/vfork.S index 1625a7b..e274793 100644 --- a/sysdeps/unix/sysv/linux/m68k/vfork.S +++ b/sysdeps/unix/sysv/linux/m68k/vfork.S @@ -28,18 +28,6 @@ ENTRY (__vfork) - /* Save the TCB-cached PID away in %d1, and then negate the TCB - field. But if it's zero, set it to 0x80000000 instead. See - raise.c for the logic that relies on this value. */ - jbsr __m68k_read_tp@PLTPC - movel %a0, %a1 - movel PID_OFFSET(%a1), %d0 - movel %d0, %d1 - negl %d0 - jne 1f - movel #0x80000000, %d0 -1: movel %d0, PID_OFFSET(%a1) - /* Pop the return PC value into A0. */ movel %sp@+, %a0 cfi_adjust_cfa_offset (-4) @@ -49,14 +37,6 @@ ENTRY (__vfork) movel #SYS_ify (vfork), %d0 trap #0 - /* Restore the original value of the TCB cache of the PID, if we're - the parent. But in the child (syscall return value equals zero), - leave things as they are. */ - tstl %d0 - jeq 1f - movel %d1, PID_OFFSET(%a1) -1: - tstl %d0 jmi .Lerror /* Branch forward if it failed. */ diff --git a/sysdeps/unix/sysv/linux/mips/clone.S b/sysdeps/unix/sysv/linux/mips/clone.S index 39634c5..7ae65ef 100644 --- a/sysdeps/unix/sysv/linux/mips/clone.S +++ b/sysdeps/unix/sysv/linux/mips/clone.S @@ -130,11 +130,6 @@ L(thread_start): SAVE_GP (GPOFF) /* The stackframe has been created on entry of clone(). */ - /* Check and see if we need to reset the PID. */ - and a1,a0,CLONE_VM - beqz a1,L(restore_pid) -L(donepid): - /* Restore the arg for user's function. */ PTR_L t9,0(sp) /* Function pointer. */ PTR_L a0,PTRSIZE(sp) /* Argument pointer. */ @@ -151,14 +146,6 @@ L(donepid): jal _exit #endif -L(restore_pid): - li v0,__NR_getpid - syscall - READ_THREAD_POINTER(v1) - INT_S v0,PID_OFFSET(v1) - INT_S v0,TID_OFFSET(v1) - b L(donepid) - END(__thread_start) libc_hidden_def (__clone) diff --git a/sysdeps/unix/sysv/linux/mips/vfork.S b/sysdeps/unix/sysv/linux/mips/vfork.S index 1867c86..0b9244b 100644 --- a/sysdeps/unix/sysv/linux/mips/vfork.S +++ b/sysdeps/unix/sysv/linux/mips/vfork.S @@ -60,14 +60,6 @@ NESTED(__libc_vfork,FRAMESZ,sp) PTR_ADDU sp, FRAMESZ cfi_adjust_cfa_offset (-FRAMESZ) - /* Save the PID value. */ - READ_THREAD_POINTER(v1) /* Get the thread pointer. */ - lw a2, PID_OFFSET(v1) /* Load the saved PID. */ - subu a2, $0, a2 /* Negate it. */ - bnez a2, 1f /* If it was zero... */ - lui a2, 0x8000 /* use 0x80000000 instead. */ -1: sw a2, PID_OFFSET(v1) /* Store the temporary PID. */ - li a0, 0x4112 /* CLONE_VM | CLONE_VFORK | SIGCHLD */ move a1, sp @@ -75,17 +67,6 @@ NESTED(__libc_vfork,FRAMESZ,sp) li v0,__NR_clone syscall - /* Restore the old PID value in the parent. */ - beqz v0, 1f /* If we are the parent... */ - READ_THREAD_POINTER(v1) /* Get the thread pointer. */ - lw a2, PID_OFFSET(v1) /* Load the saved PID. */ - subu a2, $0, a2 /* Re-negate it. */ - lui a0, 0x8000 /* Load 0x80000000... */ - bne a2, a0, 2f /* ... compare against it... */ - li a2, 0 /* ... use 0 instead. */ -2: sw a2, PID_OFFSET(v1) /* Restore the PID. */ -1: - cfi_remember_state bnez a3,L(error) diff --git a/sysdeps/unix/sysv/linux/nios2/clone.S b/sysdeps/unix/sysv/linux/nios2/clone.S index 30b6e4a..c9fa00f 100644 --- a/sysdeps/unix/sysv/linux/nios2/clone.S +++ b/sysdeps/unix/sysv/linux/nios2/clone.S @@ -68,14 +68,6 @@ thread_start: cfi_startproc cfi_undefined (ra) - /* We expect the argument registers to be preserved across system - calls and across task cloning, so flags should be in r4 here. */ - andi r2, r4, CLONE_VM - bne r2, zero, 2f - DO_CALL (getpid, 0) - stw r2, PID_OFFSET(r23) - stw r2, TID_OFFSET(r23) -2: ldw r5, 4(sp) /* Function pointer. */ ldw r4, 0(sp) /* Argument pointer. */ addi sp, sp, 8 diff --git a/sysdeps/unix/sysv/linux/nios2/vfork.S b/sysdeps/unix/sysv/linux/nios2/vfork.S index c1bb9c7..8997269 100644 --- a/sysdeps/unix/sysv/linux/nios2/vfork.S +++ b/sysdeps/unix/sysv/linux/nios2/vfork.S @@ -21,20 +21,10 @@ ENTRY(__vfork) - ldw r6, PID_OFFSET(r23) - sub r7, zero, r6 - bne r7, zero, 2f - movhi r7, %hi(0x80000000) -2: - stw r7, PID_OFFSET(r23) - movi r4, 0x4111 /* (CLONE_VM | CLONE_VFORK | SIGCHLD) */ mov r5, zero DO_CALL (clone, 2) - beq r2, zero, 1f - stw r6, PID_OFFSET(r23) -1: bne r7, zero, SYSCALL_ERROR_LABEL ret diff --git a/sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S b/sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S index bebadbf..49fe01e 100644 --- a/sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S +++ b/sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S @@ -76,15 +76,6 @@ ENTRY (__clone) crandc cr1*4+eq,cr1*4+eq,cr0*4+so bne- cr1,L(parent) /* The '-' is to minimise the race. */ - /* If CLONE_VM is set do not update the pid/tid field. */ - andi. r0,r28,CLONE_VM - bne+ cr0,L(oldpid) - - DO_CALL(SYS_ify(getpid)) - stw r3,TID(r2) - stw r3,PID(r2) -L(oldpid): - /* Call procedure. */ mtctr r30 mr r3,r31 diff --git a/sysdeps/unix/sysv/linux/powerpc/powerpc32/vfork.S b/sysdeps/unix/sysv/linux/powerpc/powerpc32/vfork.S index edbc7de..0a72495 100644 --- a/sysdeps/unix/sysv/linux/powerpc/powerpc32/vfork.S +++ b/sysdeps/unix/sysv/linux/powerpc/powerpc32/vfork.S @@ -27,34 +27,8 @@ ENTRY (__vfork) - /* Load the TCB-cached PID value and negates it. If It it is zero - sets it to 0x800000. And then sets its value again on TCB field. - See raise.c for the logic that relies on this value. */ - - lwz r0,PID(r2) - cmpwi cr0,r0,0 - neg r0,r0 - bne- cr0,1f - lis r0,0x8000 -1: stw r0,PID(r2) - DO_CALL (SYS_ify (vfork)) - cmpwi cr1,r3,0 - beqlr- 1 - - /* Restore the original value of the TCB cache of the PID, if we're - the parent. But in the child (syscall return value equals zero), - leave things as they are. */ - lwz r0,PID(r2) - /* Cannot use clrlwi. here, because cr0 needs to be preserved - until PSEUDO_RET. */ - clrlwi r4,r0,1 - cmpwi cr1,r4,0 - beq- cr1,1f - neg r4,r0 -1: stw r4,PID(r2) - PSEUDO_RET PSEUDO_END (__vfork) diff --git a/sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S b/sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S index 7c59b9b..d8604f6 100644 --- a/sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S +++ b/sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S @@ -78,15 +78,6 @@ ENTRY (__clone) crandc cr1*4+eq,cr1*4+eq,cr0*4+so bne- cr1,L(parent) /* The '-' is to minimise the race. */ - /* If CLONE_VM is set do not update the pid/tid field. */ - rldicl. r0,r29,56,63 /* flags & CLONE_VM. */ - bne+ cr0,L(oldpid) - - DO_CALL(SYS_ify(getpid)) - stw r3,TID(r13) - stw r3,PID(r13) -L(oldpid): - std r2,FRAME_TOC_SAVE(r1) /* Call procedure. */ PPC64_LOAD_FUNCPTR r30 diff --git a/sysdeps/unix/sysv/linux/powerpc/powerpc64/vfork.S b/sysdeps/unix/sysv/linux/powerpc/powerpc64/vfork.S index 3083ab7..6b4cf43 100644 --- a/sysdeps/unix/sysv/linux/powerpc/powerpc64/vfork.S +++ b/sysdeps/unix/sysv/linux/powerpc/powerpc64/vfork.S @@ -28,31 +28,8 @@ ENTRY (__vfork) CALL_MCOUNT 0 - /* Load the TCB-cached PID value and negates it. If It it is zero - sets it to 0x800000. And then sets its value again on TCB field. - See raise.c for the logic that relies on this value. */ - lwz r0,PID(r13) - cmpwi cr0,r0,0 - neg r0,r0 - bne- cr0,1f - lis r0,0x8000 -1: stw r0,PID(r13) - DO_CALL (SYS_ify (vfork)) - cmpwi cr1,r3,0 - beqlr- 1 - - /* Restore the original value of the TCB cache of the PID, if we're - the parent. But in the child (syscall return value equals zero), - leave things as they are. */ - lwz r0,PID(r13) - clrlwi r4,r0,1 - cmpwi cr1,r4,0 - beq- cr1,1f - neg r4,r0 -1: stw r4,PID(r13) - PSEUDO_RET PSEUDO_END (__vfork) diff --git a/sysdeps/unix/sysv/linux/pthread-pids.h b/sysdeps/unix/sysv/linux/pthread-pids.h index d42bba0..618a5b1 100644 --- a/sysdeps/unix/sysv/linux/pthread-pids.h +++ b/sysdeps/unix/sysv/linux/pthread-pids.h @@ -26,5 +26,5 @@ static inline void __pthread_initialize_pids (struct pthread *pd) { INTERNAL_SYSCALL_DECL (err); - pd->pid = pd->tid = INTERNAL_SYSCALL (set_tid_address, err, 1, &pd->tid); + pd->tid = INTERNAL_SYSCALL_CALL (set_tid_address, err, &pd->tid); } diff --git a/sysdeps/unix/sysv/linux/pthread_kill.c b/sysdeps/unix/sysv/linux/pthread_kill.c index bcb3009..15c9ba6 100644 --- a/sysdeps/unix/sysv/linux/pthread_kill.c +++ b/sysdeps/unix/sysv/linux/pthread_kill.c @@ -21,6 +21,7 @@ #include <pthreadP.h> #include <tls.h> #include <sysdep.h> +#include <unistd.h> int @@ -49,14 +50,15 @@ __pthread_kill (pthread_t threadid, int signo) /* We have a special syscall to do the work. */ INTERNAL_SYSCALL_DECL (err); + pid_t pid = getpid (); + /* One comment: The PID field in the TCB can temporarily be changed (in fork). But this must not affect this code here. Since this function would have to be called while the thread is executing fork, it would have to happen in a signal handler. But this is no allowed, pthread_kill is not guaranteed to be async-safe. */ int val; - val = INTERNAL_SYSCALL (tgkill, err, 3, THREAD_GETMEM (THREAD_SELF, pid), - tid, signo); + val = INTERNAL_SYSCALL_CALL (tgkill, err, pid, tid, signo); return (INTERNAL_SYSCALL_ERROR_P (val, err) ? INTERNAL_SYSCALL_ERRNO (val, err) : 0); diff --git a/sysdeps/unix/sysv/linux/pthread_sigqueue.c b/sysdeps/unix/sysv/linux/pthread_sigqueue.c index 7694d54..642366b 100644 --- a/sysdeps/unix/sysv/linux/pthread_sigqueue.c +++ b/sysdeps/unix/sysv/linux/pthread_sigqueue.c @@ -49,12 +49,14 @@ pthread_sigqueue (pthread_t threadid, int signo, const union sigval value) if (signo == SIGCANCEL || signo == SIGTIMER || signo == SIGSETXID) return EINVAL; + pid_t pid = getpid (); + /* Set up the siginfo_t structure. */ siginfo_t info; memset (&info, '\0', sizeof (siginfo_t)); info.si_signo = signo; info.si_code = SI_QUEUE; - info.si_pid = THREAD_GETMEM (THREAD_SELF, pid); + info.si_pid = pid; info.si_uid = getuid (); info.si_value = value; @@ -66,9 +68,8 @@ pthread_sigqueue (pthread_t threadid, int signo, const union sigval value) function would have to be called while the thread is executing fork, it would have to happen in a signal handler. But this is no allowed, pthread_sigqueue is not guaranteed to be async-safe. */ - int val = INTERNAL_SYSCALL (rt_tgsigqueueinfo, err, 4, - THREAD_GETMEM (THREAD_SELF, pid), - tid, signo, &info); + int val = INTERNAL_SYSCALL_CALL (rt_tgsigqueueinfo, err, pid, tid, signo, + &info); return (INTERNAL_SYSCALL_ERROR_P (val, err) ? INTERNAL_SYSCALL_ERRNO (val, err) : 0); diff --git a/sysdeps/unix/sysv/linux/s390/s390-32/clone.S b/sysdeps/unix/sysv/linux/s390/s390-32/clone.S index 2f8fa0b..b1de148 100644 --- a/sysdeps/unix/sysv/linux/s390/s390-32/clone.S +++ b/sysdeps/unix/sysv/linux/s390/s390-32/clone.S @@ -54,13 +54,6 @@ error: PSEUDO_END (__clone) thread_start: - tml %r3,256 /* CLONE_VM == 0x00000100 */ - jne 1f - svc SYS_ify(getpid) - ear %r3,%a0 - st %r2,PID(%r3) - st %r2,TID(%r3) -1: /* fn is in gpr 1, arg in gpr 0 */ lr %r2,%r0 /* set first parameter to void *arg */ ahi %r15,-96 /* make room on the stack for the save area */ diff --git a/sysdeps/unix/sysv/linux/s390/s390-32/vfork.S b/sysdeps/unix/sysv/linux/s390/s390-32/vfork.S index b7588eb..cc60e13 100644 --- a/sysdeps/unix/sysv/linux/s390/s390-32/vfork.S +++ b/sysdeps/unix/sysv/linux/s390/s390-32/vfork.S @@ -28,21 +28,9 @@ and the process ID of the new process to the old process. */ ENTRY (__libc_vfork) - ear %r4,%a0 - lhi %r1,1 - icm %r3,15,PID(%r4) - sll %r1,31 - je 1f - lcr %r1,%r3 -1: st %r1,PID(%r4) - /* Do vfork system call. */ svc SYS_ify (vfork) - ltr %r2,%r2 - je 1f - st %r3,PID(%r4) -1: /* Check for error. */ lhi %r4,-4095 clr %r2,%r4 diff --git a/sysdeps/unix/sysv/linux/s390/s390-64/clone.S b/sysdeps/unix/sysv/linux/s390/s390-64/clone.S index fb81692..29606ac 100644 --- a/sysdeps/unix/sysv/linux/s390/s390-64/clone.S +++ b/sysdeps/unix/sysv/linux/s390/s390-64/clone.S @@ -55,15 +55,6 @@ error: PSEUDO_END (__clone) thread_start: - tmll %r3,256 /* CLONE_VM == 0x00000100 */ - jne 1f - svc SYS_ify(getpid) - ear %r3,%a0 - sllg %r3,%r3,32 - ear %r3,%a1 - st %r2,PID(%r3) - st %r2,TID(%r3) -1: /* fn is in gpr 1, arg in gpr 0 */ lgr %r2,%r0 /* set first parameter to void *arg */ aghi %r15,-160 /* make room on the stack for the save area */ diff --git a/sysdeps/unix/sysv/linux/s390/s390-64/vfork.S b/sysdeps/unix/sysv/linux/s390/s390-64/vfork.S index 0bd2161..b9a813f 100644 --- a/sysdeps/unix/sysv/linux/s390/s390-64/vfork.S +++ b/sysdeps/unix/sysv/linux/s390/s390-64/vfork.S @@ -28,22 +28,9 @@ and the process ID of the new process to the old process. */ ENTRY (__libc_vfork) - ear %r4,%a0 - sllg %r4,%r4,32 - ear %r4,%a1 - icm %r3,15,PID(%r4) - llilh %r1,32768 - je 1f - lcr %r1,%r3 -1: st %r1,PID(%r4) - /* Do vfork system call. */ svc SYS_ify (vfork) - ltgr %r2,%r2 - je 1f - st %r3,PID(%r4) -1: /* Check for error. */ lghi %r4,-4095 clgr %r2,%r4 diff --git a/sysdeps/unix/sysv/linux/sh/clone.S b/sysdeps/unix/sysv/linux/sh/clone.S index 4cd7df1..ae27dad 100644 --- a/sysdeps/unix/sysv/linux/sh/clone.S +++ b/sysdeps/unix/sysv/linux/sh/clone.S @@ -66,23 +66,7 @@ ENTRY(__clone) 2: /* terminate the stack frame */ mov #0, r14 - mov r4, r0 - shlr8 r0 - tst #1, r0 // CLONE_VM = (1 << 8) - bf/s 4f - mov r4, r0 - /* new pid */ - mov #+SYS_ify(getpid), r3 - trapa #0x15 -3: - stc gbr, r1 - mov.w .Lpidoff, r2 - add r1, r2 - mov.l r0, @r2 - mov.w .Ltidoff, r2 - add r1, r2 - mov.l r0, @r2 -4: + /* thread starts */ mov.l @r15, r1 jsr @r1 diff --git a/sysdeps/unix/sysv/linux/sh/vfork.S b/sysdeps/unix/sysv/linux/sh/vfork.S index 6895bc5..777da1e 100644 --- a/sysdeps/unix/sysv/linux/sh/vfork.S +++ b/sysdeps/unix/sysv/linux/sh/vfork.S @@ -26,30 +26,11 @@ and the process ID of the new process to the old process. */ ENTRY (__libc_vfork) - /* Save the PID value. */ - stc gbr, r2 - mov.w .L2, r0 - mov.l @(r0,r2), r4 - neg r4, r1 - tst r1, r1 - bf 1f - mov #1, r1 - rotr r1 -1: - mov.l r1, @(r0,r2) mov.w .L1, r3 trapa #0x10 mov r0, r1 - /* Restore the old PID value in the parent. */ - tst r0, r0 - bt.s 2f - stc gbr, r2 - mov.w .L2, r0 - mov.l r4, @(r0,r2) - mov r1, r0 -2: mov #-12, r2 shad r2, r1 not r1, r1 // r1=0 means r0 = -1 to -4095 diff --git a/sysdeps/unix/sysv/linux/sparc/sparc32/clone.S b/sysdeps/unix/sysv/linux/sparc/sparc32/clone.S index d6c92f6..0456a0d 100644 --- a/sysdeps/unix/sysv/linux/sparc/sparc32/clone.S +++ b/sysdeps/unix/sysv/linux/sparc/sparc32/clone.S @@ -79,13 +79,6 @@ END(__clone) .type __thread_start,@function __thread_start: - andcc %g4, CLONE_VM, %g0 - bne 1f - set __NR_getpid,%g1 - ta 0x10 - st %o0,[%g7 + PID] - st %o0,[%g7 + TID] -1: mov %g0, %fp /* terminate backtrace */ call %g2 mov %g3,%o0 diff --git a/sysdeps/unix/sysv/linux/sparc/sparc32/vfork.S b/sysdeps/unix/sysv/linux/sparc/sparc32/vfork.S index 0d0a3b5..6d98503 100644 --- a/sysdeps/unix/sysv/linux/sparc/sparc32/vfork.S +++ b/sysdeps/unix/sysv/linux/sparc/sparc32/vfork.S @@ -22,24 +22,14 @@ .text .globl __syscall_error ENTRY(__libc_vfork) - ld [%g7 + PID], %o5 - cmp %o5, 0 - bne 1f - sub %g0, %o5, %o4 - sethi %hi(0x80000000), %o4 -1: st %o4, [%g7 + PID] - LOADSYSCALL(vfork) ta 0x10 bcc 2f mov %o7, %g1 - st %o5, [%g7 + PID] call __syscall_error mov %g1, %o7 2: sub %o1, 1, %o1 andcc %o0, %o1, %o0 - bne,a 1f - st %o5, [%g7 + PID] 1: retl nop END(__libc_vfork) diff --git a/sysdeps/unix/sysv/linux/sparc/sparc64/clone.S b/sysdeps/unix/sysv/linux/sparc/sparc64/clone.S index b0f6266..6ffead8 100644 --- a/sysdeps/unix/sysv/linux/sparc/sparc64/clone.S +++ b/sysdeps/unix/sysv/linux/sparc/sparc64/clone.S @@ -76,13 +76,6 @@ END(__clone) .type __thread_start,@function __thread_start: - andcc %g4, CLONE_VM, %g0 - bne,pt %icc, 1f - set __NR_getpid,%g1 - ta 0x6d - st %o0,[%g7 + PID] - st %o0,[%g7 + TID] -1: mov %g0, %fp /* terminate backtrace */ call %g2 mov %g3,%o0 diff --git a/sysdeps/unix/sysv/linux/sparc/sparc64/vfork.S b/sysdeps/unix/sysv/linux/sparc/sparc64/vfork.S index 0818eba..298dd19 100644 --- a/sysdeps/unix/sysv/linux/sparc/sparc64/vfork.S +++ b/sysdeps/unix/sysv/linux/sparc/sparc64/vfork.S @@ -22,24 +22,14 @@ .text .globl __syscall_error ENTRY(__libc_vfork) - ld [%g7 + PID], %o5 - sethi %hi(0x80000000), %o3 - cmp %o5, 0 - sub %g0, %o5, %o4 - move %icc, %o3, %o4 - st %o4, [%g7 + PID] - LOADSYSCALL(vfork) ta 0x6d bcc,pt %xcc, 2f mov %o7, %g1 - st %o5, [%g7 + PID] call __syscall_error mov %g1, %o7 2: sub %o1, 1, %o1 andcc %o0, %o1, %o0 - bne,a,pt %icc, 1f - st %o5, [%g7 + PID] 1: retl nop END(__libc_vfork) diff --git a/sysdeps/unix/sysv/linux/tile/clone.S b/sysdeps/unix/sysv/linux/tile/clone.S index d1d3646..3f9e3d5 100644 --- a/sysdeps/unix/sysv/linux/tile/clone.S +++ b/sysdeps/unix/sysv/linux/tile/clone.S @@ -163,22 +163,6 @@ ENTRY (__clone) .Lthread_start: cfi_def_cfa_offset (FRAME_SIZE) cfi_undefined (lr) - /* Check and see if we need to reset the PID, which we do if - CLONE_VM isn't set, i.e. it's a fork-like clone with a new - address space. In that case we update the cached values - from the true system pid (retrieved via __NR_getpid syscall). */ - moveli r0, CLONE_VM - and r0, r30, r0 - BNEZ r0, .Lno_reset_pid /* CLONE_VM is set */ - moveli TREG_SYSCALL_NR_NAME, __NR_getpid - swint1 - ADDLI_PTR r2, tp, PID_OFFSET - { - ST4 r2, r0 - ADDLI_PTR r2, tp, TID_OFFSET - } - ST4 r2, r0 -.Lno_reset_pid: { /* Invoke user function with specified argument. */ move r0, r31 diff --git a/sysdeps/unix/sysv/linux/tile/vfork.S b/sysdeps/unix/sysv/linux/tile/vfork.S index d8c5ce3..2272777 100644 --- a/sysdeps/unix/sysv/linux/tile/vfork.S +++ b/sysdeps/unix/sysv/linux/tile/vfork.S @@ -30,18 +30,6 @@ .text ENTRY (__vfork) { - addli r11, tp, PID_OFFSET /* Point at PID. */ - movei r13, 1 - } - { - LD4U r12, r11 /* Load the saved PID. */ - shli r13, r13, 31 /* Build 0x80000000. */ - } - sub r12, zero, r12 /* Negate it. */ - CMOVEQZ r12, r12, r13 /* Replace zero pids. */ - ST4 r11, r12 /* Store the temporary PID. */ - - { moveli r0, CLONE_VFORK | CLONE_VM | SIGCHLD move r1, zero } @@ -52,22 +40,6 @@ ENTRY (__vfork) moveli TREG_SYSCALL_NR_NAME, __NR_clone swint1 - BEQZ r0, 1f /* If we are the parent... */ - { - addli r11, tp, PID_OFFSET /* Point at PID. */ - movei r13, 1 - } - { - LD4U r12, r11 /* Load the saved PID. */ - shli r13, r13, 31 /* Build 0x80000000. */ - } - { - CMPEQ r13, r12, r12 /* Test for that value. */ - sub r12, zero, r12 /* Re-negate it. */ - } - CMOVNEZ r12, r13, zero /* Replace zero pids. */ - ST4 r11, r12 /* Restore the PID. */ -1: BNEZ r1, 0f jrp lr PSEUDO_END (__vfork) diff --git a/sysdeps/unix/sysv/linux/tst-clone2.c b/sysdeps/unix/sysv/linux/tst-clone2.c index 68a7e6d..b20332a 100644 --- a/sysdeps/unix/sysv/linux/tst-clone2.c +++ b/sysdeps/unix/sysv/linux/tst-clone2.c @@ -28,8 +28,14 @@ #include <stdlib.h> #include <sys/types.h> #include <sys/wait.h> +#include <sys/syscall.h> -#include <tls.h> /* for THREAD_* macros. */ +#include <stackinfo.h> /* For _STACK_GROWS_{UP,DOWN}. */ + +static int do_test (void); + +#define TEST_FUNCTION do_test () +#include <test-skeleton.c> static int sig; static int pipefd[2]; @@ -39,9 +45,16 @@ f (void *a) { close (pipefd[0]); - pid_t pid = THREAD_GETMEM (THREAD_SELF, pid); - pid_t tid = THREAD_GETMEM (THREAD_SELF, tid); + /* Clone without flags do not cache the pid and tid is only set in thread + creation by using CLONE_PARENT_SETTID plus pthread tid field address. + So to actually get all parent's pid and own pid/tid it requires to use + the syscalls. */ + pid_t ppid = getppid (); + pid_t pid = getpid (); + pid_t tid = syscall (__NR_gettid); + while (write (pipefd[1], &ppid, sizeof ppid) < 0) + continue; while (write (pipefd[1], &pid, sizeof pid) < 0) continue; while (write (pipefd[1], &tid, sizeof tid) < 0) @@ -52,26 +65,19 @@ f (void *a) static int -clone_test (int clone_flags) +do_test (void) { sig = SIGRTMIN; sigset_t ss; sigemptyset (&ss); sigaddset (&ss, sig); if (sigprocmask (SIG_BLOCK, &ss, NULL) != 0) - { - printf ("sigprocmask failed: %m\n"); - return 1; - } + FAIL_EXIT1 ("sigprocmask failed: %m"); if (pipe2 (pipefd, O_CLOEXEC)) - { - printf ("sigprocmask failed: %m\n"); - return 1; - } - - pid_t ppid = getpid (); + FAIL_EXIT1 ("pipe failed: %m"); + int clone_flags = 0; #ifdef __ia64__ extern int __clone2 (int (*__fn) (void *__arg), void *__child_stack_base, size_t __child_stack_size, int __flags, @@ -88,61 +94,47 @@ clone_test (int clone_flags) #error "Define either _STACK_GROWS_DOWN or _STACK_GROWS_UP" #endif #endif + close (pipefd[1]); if (p == -1) + FAIL_EXIT1("clone failed: %m"); + + pid_t ppid, pid, tid; + if (read (pipefd[0], &ppid, sizeof pid) != sizeof pid) { - printf ("clone failed: %m\n"); - return 1; + kill (p, SIGKILL); + FAIL_EXIT1 ("read ppid failed: %m"); } - - pid_t pid, tid; if (read (pipefd[0], &pid, sizeof pid) != sizeof pid) { - printf ("read pid failed: %m\n"); kill (p, SIGKILL); - return 1; + FAIL_EXIT1 ("read pid failed: %m"); } if (read (pipefd[0], &tid, sizeof tid) != sizeof tid) { - printf ("read pid failed: %m\n"); kill (p, SIGKILL); - return 1; + FAIL_EXIT1 ("read tid failed: %m"); } close (pipefd[0]); int ret = 0; - /* For CLONE_VM glibc clone implementation does not change the pthread - pid/tid field. */ - if ((clone_flags & CLONE_VM) == CLONE_VM) - { - if ((ppid != pid) || (ppid != tid)) - { - printf ("parent pid (%i) != received pid/tid (%i/%i)\n", - (int)ppid, (int)pid, (int)tid); - ret = 1; - } - } - /* For any other flag clone updates the new pthread pid and tid with - the clone return value. */ - else - { - if ((p != pid) || (p != tid)) - { - printf ("child pid (%i) != received pid/tid (%i/%i)\n", - (int)p, (int)pid, (int)tid); - ret = 1; - } - } + pid_t own_pid = getpid (); + pid_t own_tid = syscall (__NR_gettid); + + /* Some sanity checks for clone syscall: returned ppid should be currernt + pid and both returned tid/pid should be different from current one. */ + if ((ppid != own_pid) || (pid == own_pid) || (tid == own_tid)) + FAIL_RET ("ppid=%i pid=%i tid=%i | own_pid=%i own_tid=%i", + (int)ppid, (int)pid, (int)tid, (int)own_pid, (int)own_tid); int e; if (waitpid (p, &e, __WCLONE) != p) { - puts ("waitpid failed"); kill (p, SIGKILL); - return 1; + FAIL_EXIT1 ("waitpid failed"); } if (!WIFEXITED (e)) { @@ -150,29 +142,10 @@ clone_test (int clone_flags) printf ("died from signal %s\n", strsignal (WTERMSIG (e))); else puts ("did not terminate correctly"); - return 1; + exit (EXIT_FAILURE); } if (WEXITSTATUS (e) != 0) - { - printf ("exit code %d\n", WEXITSTATUS (e)); - return 1; - } + FAIL_EXIT1 ("exit code %d", WEXITSTATUS (e)); return ret; } - -int -do_test (void) -{ - /* First, check that the clone implementation, without any flag, updates - the struct pthread to contain the new PID and TID. */ - int ret = clone_test (0); - /* Second, check that with CLONE_VM the struct pthread PID and TID fields - remain unmodified after the clone. Any modifications would cause problem - for the parent as described in bug 19957. */ - ret += clone_test (CLONE_VM); - return ret; -} - -#define TEST_FUNCTION do_test () -#include "../test-skeleton.c" diff --git a/sysdeps/unix/sysv/linux/x86_64/clone.S b/sysdeps/unix/sysv/linux/x86_64/clone.S index 66f4b11..5629aed 100644 --- a/sysdeps/unix/sysv/linux/x86_64/clone.S +++ b/sysdeps/unix/sysv/linux/x86_64/clone.S @@ -91,14 +91,6 @@ L(thread_start): the outermost frame obviously. */ xorl %ebp, %ebp - andq $CLONE_VM, %rdi - jne 1f - movl $SYS_ify(getpid), %eax - syscall - movl %eax, %fs:PID - movl %eax, %fs:TID -1: - /* Set up arguments for the function call. */ popq %rax /* Function to call. */ popq %rdi /* Argument. */ diff --git a/sysdeps/unix/sysv/linux/x86_64/vfork.S b/sysdeps/unix/sysv/linux/x86_64/vfork.S index 8332ade..cdd2dea 100644 --- a/sysdeps/unix/sysv/linux/x86_64/vfork.S +++ b/sysdeps/unix/sysv/linux/x86_64/vfork.S @@ -34,16 +34,6 @@ ENTRY (__vfork) cfi_adjust_cfa_offset(-8) cfi_register(%rip, %rdi) - /* Save the TCB-cached PID away in %esi, and then negate the TCB - field. But if it's zero, set it to 0x80000000 instead. See - raise.c for the logic that relies on this value. */ - movl %fs:PID, %esi - movl $0x80000000, %ecx - movl %esi, %edx - negl %edx - cmove %ecx, %edx - movl %edx, %fs:PID - /* Stuff the syscall number in RAX and enter into the kernel. */ movl $SYS_ify (vfork), %eax syscall @@ -52,14 +42,6 @@ ENTRY (__vfork) pushq %rdi cfi_adjust_cfa_offset(8) - /* Restore the original value of the TCB cache of the PID, if we're - the parent. But in the child (syscall return value equals zero), - leave things as they are. */ - testq %rax, %rax - je 1f - movl %esi, %fs:PID -1: - cmpl $-4095, %eax jae SYSCALL_ERROR_LABEL /* Branch forward if it failed. */ diff --git a/sysdeps/x86_64/nptl/tcb-offsets.sym b/sysdeps/x86_64/nptl/tcb-offsets.sym index aeb7526..8a25c48 100644 --- a/sysdeps/x86_64/nptl/tcb-offsets.sym +++ b/sysdeps/x86_64/nptl/tcb-offsets.sym @@ -4,7 +4,6 @@ RESULT offsetof (struct pthread, result) TID offsetof (struct pthread, tid) -PID offsetof (struct pthread, pid) CANCELHANDLING offsetof (struct pthread, cancelhandling) CLEANUP_JMP_BUF offsetof (struct pthread, cleanup_jmp_buf) CLEANUP offsetof (struct pthread, cleanup)
This patch remove the PID cache and usage in current GLIBC code. Current usage is mainly used for performance optimization to avoid the syscall, however it adds some issues: - The exposed clone syscall will try to set pid/tid to make the new thread somewhat compatible with current GLIBC assumptions. This cause a set of issue with new workloads and usercases (such as BZ#17214 and [1]) as well for new internal usage of clone to optimize other algorithms (such as clone plus CLONE_VM for posix_spawn, BZ#19957). - The caching complexity also added some bugs in the past [2] [3] and requires more effort of each port to handle such requirements (for both clone and vfork implementation). - Caching performance gain in mainly or getpid and some specific code paths. The getpid performance leverage is questionable [4], either by the idea of getpid being a hotspot as for the getpid implementation itself (if it is indeed a justifiable hotspot a vDSO symbol could let to a much more simpler solution). Other usage is mainly for non usual code paths, such as pthread cancellation signal and handling. For thread creation (on atack allocation) the code simplification in fact adds some performance gain due the no need of transverse the stack cache and invalidate each element pid. Other thread usages will require a direct getpid syscall, such as cancellation/setxid signal, thread cancellation, thread fail path (at create_thread), and thread signal (pthread_kill and pthread_sigqueue). However these are hardly usual hotspots and I think adding a syscall is justifiable. It also simplifies both the clone and vfork arch-specific implementation. And by review each fork implementation there are some discrepancies that this patch also solves: - microblaze clone/vfork does not set/reset the pid/tid field - hppa uses the default vfork implementation that fallback to fork. Since vfork is deprecated I do not think we should bother with it. The patch also removes the TID caching in clone. My understanding for such semantic is try provide some pthread usage after a user program issue clone directly (as done by thread creation with CLONE_PARENT_SETTID and pthread tid member). However, as stated before in multiple threads, GLIBC provides clone syscalls without futher supporting all this semantics. It means that, although GLIBC currently tries a better effort, since it does not make any more guarantees, specially for newer and newer clone flags. I ran a full make check on x86_64, x32, i686, armhf, aarch64, and powerpc64le. For sparc32, sparc64, and mips I ran the basic fork and vfork tests from posix/ folder (on a qemu system). So it would require further testing on alpha, hppa, ia64, m68k, nios2, s390, sh, and tile (I excluded microblaze because it is already implementing the patch semantic regarding clone/vfork). [1] https://codereview.chromium.org/800183004/ [2] https://sourceware.org/ml/libc-alpha/2006-07/msg00123.html [3] https://sourceware.org/bugzilla/show_bug.cgi?id=15368 [4] http://yarchive.net/comp/linux/getpid_caching.html * sysdeps/nptl/fork.c (__libc_fork): Remove pid cache setting. * nptl/allocatestack.c (allocate_stack): Likewise. (__reclaim_stacks): Likewise. (setxid_signal_thread): Obtain pid through syscall. * nptl/nptl-init.c (sigcancel_handler): Likewise. (sighandle_setxid): Likewise. * nptl/pthread_cancel.c (pthread_cancel): Likewise. * sysdeps/unix/sysv/linux/pthread_kill.c (__pthread_kill): Likewise. * sysdeps/unix/sysv/linux/pthread_sigqueue.c (pthread_sigqueue): Likewise. * sysdeps/unix/sysv/linux/createthread.c (create_thread): Likewise. * sysdeps/unix/sysv/linux/getpid.c: Likewise. * nptl/descr.h (struct pthread): Change comment about pid value. * nptl/pthread_getattr_np.c (pthread_getattr_np): Remove thread pid assert. * sysdeps/unix/sysv/linux/pthread-pids.h (__pthread_initialize_pids): Do not set pid value. * nptl_db/td_ta_thr_iter.c (iterate_thread_list): Remove thread pid cache check. * nptl_db/td_thr_validate.c (td_thr_validate): Likewise. * sysdeps/aarch64/nptl/tcb-offsets.sym: Remove pid offset. * sysdeps/alpha/nptl/tcb-offsets.sym: Likewise. * sysdeps/arm/nptl/tcb-offsets.sym: Likewise. * sysdeps/hppa/nptl/tcb-offsets.sym: Likewise. * sysdeps/i386/nptl/tcb-offsets.sym: Likewise. * sysdeps/ia64/nptl/tcb-offsets.sym: Likewise. * sysdeps/m68k/nptl/tcb-offsets.sym: Likewise. * sysdeps/microblaze/nptl/tcb-offsets.sym: Likewise. * sysdeps/mips/nptl/tcb-offsets.sym: Likewise. * sysdeps/nios2/nptl/tcb-offsets.sym: Likewise. * sysdeps/powerpc/nptl/tcb-offsets.sym: Likewise. * sysdeps/s390/nptl/tcb-offsets.sym: Likewise. * sysdeps/sh/nptl/tcb-offsets.sym: Likewise. * sysdeps/sparc/nptl/tcb-offsets.sym: Likewise. * sysdeps/tile/nptl/tcb-offsets.sym: Likewise. * sysdeps/x86_64/nptl/tcb-offsets.sym: Likewise. * sysdeps/unix/sysv/linux/aarch64/clone.S: Remove pid and tid caching. * sysdeps/unix/sysv/linux/alpha/clone.S: Likewise. * sysdeps/unix/sysv/linux/arm/clone.S: Likewise. * sysdeps/unix/sysv/linux/hppa/clone.S: Likewise. * sysdeps/unix/sysv/linux/i386/clone.S: Likewise. * sysdeps/unix/sysv/linux/ia64/clone2.S: Likewise. * sysdeps/unix/sysv/linux/mips/clone.S: Likewise. * sysdeps/unix/sysv/linux/nios2/clone.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/clone.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/clone.S: Likewise. * sysdeps/unix/sysv/linux/sh/clone.S: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/clone.S: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/clone.S: Likewise. * sysdeps/unix/sysv/linux/tile/clone.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/clone.S: Likewise. * sysdeps/unix/sysv/linux/aarch64/vfork.S: Remove pid set and reset. * sysdeps/unix/sysv/linux/alpha/vfork.S: Likewise. * sysdeps/unix/sysv/linux/arm/vfork.S: Likewise. * sysdeps/unix/sysv/linux/i386/vfork.S: Likewise. * sysdeps/unix/sysv/linux/ia64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/m68k/clone.S: Likewise. * sysdeps/unix/sysv/linux/m68k/vfork.S: Likewise. * sysdeps/unix/sysv/linux/mips/vfork.S: Likewise. * sysdeps/unix/sysv/linux/nios2/vfork.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/vfork.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/vfork.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/sh/vfork.S: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/vfork.S: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/tile/vfork.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/tst-clone2.c (f): Remove direct pthread struct access. (clone_test): Remove function. (do_test): Rewrite to take in consideration pid is not cached anymore. --- ChangeLog | 78 ++++++++++++++++ nptl/allocatestack.c | 20 +--- nptl/descr.h | 2 +- nptl/nptl-init.c | 15 +-- nptl/pthread_cancel.c | 18 +--- nptl/pthread_getattr_np.c | 1 - nptl_db/td_ta_thr_iter.c | 56 ++++------- nptl_db/td_thr_validate.c | 23 ----- sysdeps/aarch64/nptl/tcb-offsets.sym | 1 - sysdeps/alpha/nptl/tcb-offsets.sym | 1 - sysdeps/arm/nptl/tcb-offsets.sym | 1 - sysdeps/hppa/nptl/tcb-offsets.sym | 1 - sysdeps/i386/nptl/tcb-offsets.sym | 1 - sysdeps/ia64/nptl/tcb-offsets.sym | 1 - sysdeps/m68k/nptl/tcb-offsets.sym | 1 - sysdeps/microblaze/nptl/tcb-offsets.sym | 1 - sysdeps/mips/nptl/tcb-offsets.sym | 1 - sysdeps/nios2/nptl/tcb-offsets.sym | 1 - sysdeps/nptl/fork.c | 14 --- sysdeps/powerpc/nptl/tcb-offsets.sym | 1 - sysdeps/s390/nptl/tcb-offsets.sym | 1 - sysdeps/sh/nptl/tcb-offsets.sym | 1 - sysdeps/sparc/nptl/tcb-offsets.sym | 1 - sysdeps/tile/nptl/tcb-offsets.sym | 1 - sysdeps/unix/sysv/linux/aarch64/clone.S | 10 -- sysdeps/unix/sysv/linux/aarch64/vfork.S | 17 ---- sysdeps/unix/sysv/linux/alpha/clone.S | 16 ---- sysdeps/unix/sysv/linux/alpha/vfork.S | 15 --- sysdeps/unix/sysv/linux/arm/clone.S | 10 -- sysdeps/unix/sysv/linux/arm/vfork.S | 15 --- sysdeps/unix/sysv/linux/createthread.c | 6 +- sysdeps/unix/sysv/linux/getpid.c | 34 +------ sysdeps/unix/sysv/linux/hppa/clone.S | 12 --- sysdeps/unix/sysv/linux/i386/clone.S | 15 --- sysdeps/unix/sysv/linux/i386/vfork.S | 19 ---- sysdeps/unix/sysv/linux/ia64/clone2.S | 14 +-- sysdeps/unix/sysv/linux/ia64/vfork.S | 20 ---- sysdeps/unix/sysv/linux/m68k/clone.S | 13 --- sysdeps/unix/sysv/linux/m68k/vfork.S | 20 ---- sysdeps/unix/sysv/linux/mips/clone.S | 13 --- sysdeps/unix/sysv/linux/mips/vfork.S | 19 ---- sysdeps/unix/sysv/linux/nios2/clone.S | 8 -- sysdeps/unix/sysv/linux/nios2/vfork.S | 10 -- sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S | 9 -- sysdeps/unix/sysv/linux/powerpc/powerpc32/vfork.S | 26 ------ sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S | 9 -- sysdeps/unix/sysv/linux/powerpc/powerpc64/vfork.S | 23 ----- sysdeps/unix/sysv/linux/pthread-pids.h | 2 +- sysdeps/unix/sysv/linux/pthread_kill.c | 6 +- sysdeps/unix/sysv/linux/pthread_sigqueue.c | 9 +- sysdeps/unix/sysv/linux/s390/s390-32/clone.S | 7 -- sysdeps/unix/sysv/linux/s390/s390-32/vfork.S | 12 --- sysdeps/unix/sysv/linux/s390/s390-64/clone.S | 9 -- sysdeps/unix/sysv/linux/s390/s390-64/vfork.S | 13 --- sysdeps/unix/sysv/linux/sh/clone.S | 18 +--- sysdeps/unix/sysv/linux/sh/vfork.S | 19 ---- sysdeps/unix/sysv/linux/sparc/sparc32/clone.S | 7 -- sysdeps/unix/sysv/linux/sparc/sparc32/vfork.S | 10 -- sysdeps/unix/sysv/linux/sparc/sparc64/clone.S | 7 -- sysdeps/unix/sysv/linux/sparc/sparc64/vfork.S | 10 -- sysdeps/unix/sysv/linux/tile/clone.S | 16 ---- sysdeps/unix/sysv/linux/tile/vfork.S | 28 ------ sysdeps/unix/sysv/linux/tst-clone2.c | 107 ++++++++-------------- sysdeps/unix/sysv/linux/x86_64/clone.S | 8 -- sysdeps/unix/sysv/linux/x86_64/vfork.S | 18 ---- sysdeps/x86_64/nptl/tcb-offsets.sym | 1 - 66 files changed, 162 insertions(+), 740 deletions(-)