Message ID | ormudd28xt.fsf@livre.home |
---|---|
State | New |
Headers | show |
Series | [FYI] pass --enable-obsolete to build configure | expand |
On Nov 02 2019, Alexandre Oliva wrote: > @@ -903,6 +904,7 @@ infodir > docdir > oldincludedir > includedir > +runstatedir > localstatedir > sharedstatedir > sysconfdir Don't add unreleated changes. Andreas.
On Nov 3, 2019, Andreas Schwab <schwab@linux-m68k.org> wrote:
> Don't add unreleated changes.
Oh, thanks, I'm glad I failed to omit the regenerated file from the
email, I might have otherwise missed the unexpected changes made by
Trisquel's autoconf.
I've installed a pristine autoconf-2.69 from ftp.gnu.org, and used it to
rebuild the file, now there aren't any unrelated changes.
Here's the patch I'm checking in momentarily. No changes but the
improved oneline description and the rebuilt gcc/configure.
pass --enable-obsolete down to gcc/configure for auto-build.h
Configuring GCC for obsolete targets works as long as build = host.
When it isn't, --enable-obsolete is not passed down to the additional
build configure started by gcc/configure, used to generate
auto-build.h. The build configure fails and we end up without a
auto-build.h, but the host configure proceeds, so we only get a fatal
failure much later, when make realizes auto-build.h is not there and
there's no rule to create it.
This patch gets the host configure to fail when the build configure
does, leaving the temporary build configure dir behind for
investigation. It also arranges for --eanble-obsolete to be passed
down to the build configure.
Alas, the latter triggered a warning in the build configure because
--enable-obsolete is not a recognized configure option. That's not
reported in the host configure because of the
--disable-option-checking passed by the top-level configure, so I
arranged for that to be passed down to the build configure as well.
Finally, since my initial suspicion when investigating this failure
was that auto-build.h had been removed after configuration and there
was no rule to rebuild it, I'm adding rules to gcc/Makefile to get it
created or updated as needed. Since it is configure that creates it,
as run by e.g. config.status --recheck, and config.status is created
after auto-build.h, I've made config.status depend on auto-build.h,
and added a dummy rule to create auto-build.h. This would normally
not be enough to create a header when needed, but since Makefile
depends on config.status, and make first updates Makefile, it ends up
working, as long as nothing else that Makefile depends on requires
auto-build.h but not config.status. The config.status dependency and
the auto-build.h rule are only enabled in the cases in which
auto-build.h is actually used, namely when build != host.
for gcc/ChangeLog
* configure.ac: Pass --enable-obsolete=* and
--enable-option-checking=* down to build configure, and fail
if it fails. AC_SUBST HAVE_AUTO_BUILD.
* configure: Rebuild.
* Makefile.in [HAVE_AUTO_BUILD] (auto-build.h): New rule.
[HAVE_AUTO_BUILD] (config.status): Depend on auto-build.h.
---
gcc/Makefile.in | 8 ++++++++
gcc/configure | 13 ++++++++++---
gcc/configure.ac | 8 +++++++-
3 files changed, 25 insertions(+), 4 deletions(-)
diff --git a/gcc/Makefile.in b/gcc/Makefile.in
index 035b58f..95f054c 100644
--- a/gcc/Makefile.in
+++ b/gcc/Makefile.in
@@ -1899,6 +1899,14 @@ cstamp-h: config.in config.status
CONFIG_FILES= \
LANGUAGES="$(CONFIG_LANGUAGES)" $(SHELL) config.status
+# On configurations that require auto-build.h, it is created while
+# running configure, so make config.status depend on it, so that
+# config.status --recheck runs and updates or creates it.
+@HAVE_AUTO_BUILD@auto-build.h: $(srcdir)/configure $(srcdir)/config.gcc
+@HAVE_AUTO_BUILD@ @if test -f $@; then echo rerunning config.status to update $@; \
+@HAVE_AUTO_BUILD@ else echo rerunning config.status to update $@; fi
+@HAVE_AUTO_BUILD@config.status: auto-build.h
+
# Really, really stupid make features, such as SUN's KEEP_STATE, may force
# a target to build even if it is up-to-date. So we must verify that
# config.status does not exist before failing.
diff --git a/gcc/configure b/gcc/configure
index 9fe0429..6808c23 100755
--- a/gcc/configure
+++ b/gcc/configure
@@ -774,6 +774,7 @@ LIBINTL_DEP
LIBINTL
USE_NLS
get_gcc_base_ver
+HAVE_AUTO_BUILD
extra_opt_files
extra_modes_file
NATIVE_SYSTEM_HEADER_DIR
@@ -12208,6 +12209,7 @@ done
if test x$host = x$build
then
build_auto=auto-host.h
+ HAVE_AUTO_BUILD='# '
else
# We create a subdir, then run autoconf in the subdir.
# To prevent recursion we set host and build for the new
@@ -12230,7 +12232,10 @@ else
GMPINC="" CPPFLAGS="${CPPFLAGS} -DGENERATOR_FILE" \
${realsrcdir}/configure \
--enable-languages=${enable_languages-all} \
- --target=$target_alias --host=$build_alias --build=$build_alias
+ ${enable_obsolete+--enable-obsolete="$enable_obsolete"} \
+ ${enable_option_checking+--enable-option-checking="$enable_option_checking"} \
+ --target=$target_alias --host=$build_alias \
+ --build=$build_alias || exit # retaining $tempdir
# We just finished tests for the build machine, so rename
# the file auto-build.h in the gcc directory.
@@ -12238,9 +12243,11 @@ else
cd ..
rm -rf $tempdir
build_auto=auto-build.h
+ HAVE_AUTO_BUILD=
fi
+
tm_file="${tm_file} defaults.h"
tm_p_file="${tm_p_file} tm-preds.h"
tm_d_file="${tm_d_file} defaults.h"
@@ -18926,7 +18933,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 18929 "configure"
+#line 18936 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -19032,7 +19039,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 19035 "configure"
+#line 19042 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
diff --git a/gcc/configure.ac b/gcc/configure.ac
index 0fe4e54..1a0d682 100644
--- a/gcc/configure.ac
+++ b/gcc/configure.ac
@@ -1838,6 +1838,7 @@ AC_SUBST(extra_opt_files)
if test x$host = x$build
then
build_auto=auto-host.h
+ HAVE_AUTO_BUILD='# '
else
# We create a subdir, then run autoconf in the subdir.
# To prevent recursion we set host and build for the new
@@ -1860,7 +1861,10 @@ else
GMPINC="" CPPFLAGS="${CPPFLAGS} -DGENERATOR_FILE" \
${realsrcdir}/configure \
--enable-languages=${enable_languages-all} \
- --target=$target_alias --host=$build_alias --build=$build_alias
+ ${enable_obsolete+--enable-obsolete="$enable_obsolete"} \
+ ${enable_option_checking+--enable-option-checking="$enable_option_checking"} \
+ --target=$target_alias --host=$build_alias \
+ --build=$build_alias || exit # retaining $tempdir
# We just finished tests for the build machine, so rename
# the file auto-build.h in the gcc directory.
@@ -1868,8 +1872,10 @@ else
cd ..
rm -rf $tempdir
build_auto=auto-build.h
+ HAVE_AUTO_BUILD=
fi
AC_SUBST(build_subdir)
+AC_SUBST(HAVE_AUTO_BUILD)
tm_file="${tm_file} defaults.h"
tm_p_file="${tm_p_file} tm-preds.h"
diff --git a/gcc/Makefile.in b/gcc/Makefile.in index 035b58f..95f054c 100644 --- a/gcc/Makefile.in +++ b/gcc/Makefile.in @@ -1899,6 +1899,14 @@ cstamp-h: config.in config.status CONFIG_FILES= \ LANGUAGES="$(CONFIG_LANGUAGES)" $(SHELL) config.status +# On configurations that require auto-build.h, it is created while +# running configure, so make config.status depend on it, so that +# config.status --recheck runs and updates or creates it. +@HAVE_AUTO_BUILD@auto-build.h: $(srcdir)/configure $(srcdir)/config.gcc +@HAVE_AUTO_BUILD@ @if test -f $@; then echo rerunning config.status to update $@; \ +@HAVE_AUTO_BUILD@ else echo rerunning config.status to update $@; fi +@HAVE_AUTO_BUILD@config.status: auto-build.h + # Really, really stupid make features, such as SUN's KEEP_STATE, may force # a target to build even if it is up-to-date. So we must verify that # config.status does not exist before failing. diff --git a/gcc/configure b/gcc/configure index 5794582..1ebe373 100755 --- a/gcc/configure +++ b/gcc/configure @@ -774,6 +774,7 @@ LIBINTL_DEP LIBINTL USE_NLS get_gcc_base_ver +HAVE_AUTO_BUILD extra_opt_files extra_modes_file NATIVE_SYSTEM_HEADER_DIR @@ -903,6 +904,7 @@ infodir docdir oldincludedir includedir +runstatedir localstatedir sharedstatedir sysconfdir @@ -1067,6 +1069,7 @@ datadir='${datarootdir}' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' +runstatedir='${localstatedir}/run' includedir='${prefix}/include' oldincludedir='/usr/include' docdir='${datarootdir}/doc/${PACKAGE}' @@ -1319,6 +1322,15 @@ do | -silent | --silent | --silen | --sile | --sil) silent=yes ;; + -runstatedir | --runstatedir | --runstatedi | --runstated \ + | --runstate | --runstat | --runsta | --runst | --runs \ + | --run | --ru | --r) + ac_prev=runstatedir ;; + -runstatedir=* | --runstatedir=* | --runstatedi=* | --runstated=* \ + | --runstate=* | --runstat=* | --runsta=* | --runst=* | --runs=* \ + | --run=* | --ru=* | --r=*) + runstatedir=$ac_optarg ;; + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ @@ -1456,7 +1468,7 @@ fi for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ datadir sysconfdir sharedstatedir localstatedir includedir \ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ - libdir localedir mandir + libdir localedir mandir runstatedir do eval ac_val=\$$ac_var # Remove trailing slashes. @@ -1609,6 +1621,7 @@ Fine tuning of the installation directories: --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --runstatedir=DIR modifiable per-process data [LOCALSTATEDIR/run] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] @@ -5893,7 +5906,7 @@ else We can't simply define LARGE_OFF_T to be 9223372036854775807, since some C++ compilers masquerading as C compilers incorrectly reject 9223372036854775807. */ -#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) +#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31)) int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 && LARGE_OFF_T % 2147483647 == 1) ? 1 : -1]; @@ -5939,7 +5952,7 @@ else We can't simply define LARGE_OFF_T to be 9223372036854775807, since some C++ compilers masquerading as C compilers incorrectly reject 9223372036854775807. */ -#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) +#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31)) int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 && LARGE_OFF_T % 2147483647 == 1) ? 1 : -1]; @@ -5963,7 +5976,7 @@ rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext We can't simply define LARGE_OFF_T to be 9223372036854775807, since some C++ compilers masquerading as C compilers incorrectly reject 9223372036854775807. */ -#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) +#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31)) int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 && LARGE_OFF_T % 2147483647 == 1) ? 1 : -1]; @@ -6008,7 +6021,7 @@ else We can't simply define LARGE_OFF_T to be 9223372036854775807, since some C++ compilers masquerading as C compilers incorrectly reject 9223372036854775807. */ -#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) +#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31)) int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 && LARGE_OFF_T % 2147483647 == 1) ? 1 : -1]; @@ -6032,7 +6045,7 @@ rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext We can't simply define LARGE_OFF_T to be 9223372036854775807, since some C++ compilers masquerading as C compilers incorrectly reject 9223372036854775807. */ -#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) +#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31)) int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 && LARGE_OFF_T % 2147483647 == 1) ? 1 : -1]; @@ -12150,6 +12163,7 @@ done if test x$host = x$build then build_auto=auto-host.h + HAVE_AUTO_BUILD='# ' else # We create a subdir, then run autoconf in the subdir. # To prevent recursion we set host and build for the new @@ -12172,7 +12186,10 @@ else GMPINC="" CPPFLAGS="${CPPFLAGS} -DGENERATOR_FILE" \ ${realsrcdir}/configure \ --enable-languages=${enable_languages-all} \ - --target=$target_alias --host=$build_alias --build=$build_alias + ${enable_obsolete+--enable-obsolete="$enable_obsolete"} \ + ${enable_option_checking+--enable-option-checking="$enable_option_checking"} \ + --target=$target_alias --host=$build_alias \ + --build=$build_alias || exit # retaining $tempdir # We just finished tests for the build machine, so rename # the file auto-build.h in the gcc directory. @@ -12180,9 +12197,11 @@ else cd .. rm -rf $tempdir build_auto=auto-build.h + HAVE_AUTO_BUILD= fi + tm_file="${tm_file} defaults.h" tm_p_file="${tm_p_file} tm-preds.h" tm_d_file="${tm_d_file} defaults.h" @@ -18868,7 +18887,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 18871 "configure" +#line 18890 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -18974,7 +18993,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 18977 "configure" +#line 18996 "configure" #include "confdefs.h" #if HAVE_DLFCN_H diff --git a/gcc/configure.ac b/gcc/configure.ac index 8df849f4..71ae18e0 100644 --- a/gcc/configure.ac +++ b/gcc/configure.ac @@ -1830,6 +1830,7 @@ AC_SUBST(extra_opt_files) if test x$host = x$build then build_auto=auto-host.h + HAVE_AUTO_BUILD='# ' else # We create a subdir, then run autoconf in the subdir. # To prevent recursion we set host and build for the new @@ -1852,7 +1853,10 @@ else GMPINC="" CPPFLAGS="${CPPFLAGS} -DGENERATOR_FILE" \ ${realsrcdir}/configure \ --enable-languages=${enable_languages-all} \ - --target=$target_alias --host=$build_alias --build=$build_alias + ${enable_obsolete+--enable-obsolete="$enable_obsolete"} \ + ${enable_option_checking+--enable-option-checking="$enable_option_checking"} \ + --target=$target_alias --host=$build_alias \ + --build=$build_alias || exit # retaining $tempdir # We just finished tests for the build machine, so rename # the file auto-build.h in the gcc directory. @@ -1860,8 +1864,10 @@ else cd .. rm -rf $tempdir build_auto=auto-build.h + HAVE_AUTO_BUILD= fi AC_SUBST(build_subdir) +AC_SUBST(HAVE_AUTO_BUILD) tm_file="${tm_file} defaults.h" tm_p_file="${tm_p_file} tm-preds.h"