diff mbox series

[08/16] aarch64: Add a VNx1TI mode

Message ID mptpmdrnpfh.fsf@arm.com
State New
Headers show
Series aarch64: Add support for SME | expand

Commit Message

Richard Sandiford Nov. 13, 2022, 10:01 a.m. UTC 
Although TI isn't really a native SVE element mode, it's convenient
for SME if we define VNx1TI anyway, so that it can be used to
distinguish .Q ZA operations from others.  It's purely an RTL
convenience and isn't (yet) a valid storage mode.

gcc/
	* config/aarch64/aarch64-modes.def: Add VNx1TI.
---
 gcc/config/aarch64/aarch64-modes.def | 21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/gcc/config/aarch64/aarch64-modes.def b/gcc/config/aarch64/aarch64-modes.def
index 0fd4c32ad0b..e960b649a6b 100644
--- a/gcc/config/aarch64/aarch64-modes.def
+++ b/gcc/config/aarch64/aarch64-modes.def
@@ -148,7 +148,7 @@  ADV_SIMD_Q_REG_STRUCT_MODES (4, V4x16, V4x8, V4x4, V4x2)
    for 8-bit, 16-bit, 32-bit and 64-bit elements respectively.  It isn't
    strictly necessary to set the alignment here, since the default would
    be clamped to BIGGEST_ALIGNMENT anyhow, but it seems clearer.  */
-#define SVE_MODES(NVECS, VB, VH, VS, VD) \
+#define SVE_MODES(NVECS, VB, VH, VS, VD, VT) \
   VECTOR_MODES_WITH_PREFIX (VNx, INT, 16 * NVECS, NVECS == 1 ? 1 : 4); \
   VECTOR_MODES_WITH_PREFIX (VNx, FLOAT, 16 * NVECS, NVECS == 1 ? 1 : 4); \
   \
@@ -156,6 +156,7 @@  ADV_SIMD_Q_REG_STRUCT_MODES (4, V4x16, V4x8, V4x4, V4x2)
   ADJUST_NUNITS (VH##HI, aarch64_sve_vg * NVECS * 4); \
   ADJUST_NUNITS (VS##SI, aarch64_sve_vg * NVECS * 2); \
   ADJUST_NUNITS (VD##DI, aarch64_sve_vg * NVECS); \
+  ADJUST_NUNITS (VT##TI, exact_div (aarch64_sve_vg * NVECS, 2)); \
   ADJUST_NUNITS (VH##BF, aarch64_sve_vg * NVECS * 4); \
   ADJUST_NUNITS (VH##HF, aarch64_sve_vg * NVECS * 4); \
   ADJUST_NUNITS (VS##SF, aarch64_sve_vg * NVECS * 2); \
@@ -165,17 +166,23 @@  ADV_SIMD_Q_REG_STRUCT_MODES (4, V4x16, V4x8, V4x4, V4x2)
   ADJUST_ALIGNMENT (VH##HI, 16); \
   ADJUST_ALIGNMENT (VS##SI, 16); \
   ADJUST_ALIGNMENT (VD##DI, 16); \
+  ADJUST_ALIGNMENT (VT##TI, 16); \
   ADJUST_ALIGNMENT (VH##BF, 16); \
   ADJUST_ALIGNMENT (VH##HF, 16); \
   ADJUST_ALIGNMENT (VS##SF, 16); \
   ADJUST_ALIGNMENT (VD##DF, 16);
 
-/* Give SVE vectors the names normally used for 256-bit vectors.
-   The actual number depends on command-line flags.  */
-SVE_MODES (1, VNx16, VNx8, VNx4, VNx2)
-SVE_MODES (2, VNx32, VNx16, VNx8, VNx4)
-SVE_MODES (3, VNx48, VNx24, VNx12, VNx6)
-SVE_MODES (4, VNx64, VNx32, VNx16, VNx8)
+/* Give SVE vectors names of the form VNxX, where X describes what is
+   stored in each 128-bit unit.  The actual size of the mode depends
+   on command-line flags.
+
+   VNx1TI isn't really a native SVE mode, but it can be useful in some
+   limited situations.  */
+VECTOR_MODE_WITH_PREFIX (VNx, INT, TI, 1, 1);
+SVE_MODES (1, VNx16, VNx8, VNx4, VNx2, VNx1)
+SVE_MODES (2, VNx32, VNx16, VNx8, VNx4, VNx2)
+SVE_MODES (3, VNx48, VNx24, VNx12, VNx6, VNx3)
+SVE_MODES (4, VNx64, VNx32, VNx16, VNx8, VNx4)
 
 /* Partial SVE vectors: