RISC-V: Add initial cost handling for segment loads/stores.

Hi,

This has been sitting on my local tree - I've been wanting to post it
for a while but somehow forgot.

This patch makes segment loads and stores more expensive.  It adds
segment_load and segment_store cost fields to the common vector costs
and adds handling to adjust_stmt_cost.  In the future we could handle
this in a more fine-grained manner but let's start somehow.

Regtested on rv64.

Regards
 Robin

gcc/ChangeLog:

	* config/riscv/riscv-protos.h (struct common_vector_cost): Add
	segment_[load/store]_cost.
	* config/riscv/riscv-vector-costs.cc (costs::adjust_stmt_cost):
	Handle segment loads/stores.
	* config/riscv/riscv.cc: Initialize segment_[load/store]_cost
	to 1.

gcc/testsuite/ChangeLog:

	* gcc.dg/vect/costmodel/riscv/rvv/pr113112-4.c: Expect m4
	instead of m2.
---
 gcc/config/riscv/riscv-protos.h               |   4 +
 gcc/config/riscv/riscv-vector-costs.cc        | 127 ++++++++++++------
 gcc/config/riscv/riscv.cc                     |   4 +
 .../vect/costmodel/riscv/rvv/pr113112-4.c     |   4 +-
 4 files changed, 95 insertions(+), 44 deletions(-)

This patch looks odd to me.
I don't see memrefs in the trunk code.

Also, I prefer list all cost in cost tune info for NF = 2 ~ 8 like ARM SVE does:

      /* Detect cases in which a vector load or store represents an
LD[234] or ST[234] instruction.  */
      switch (aarch64_ld234_st234_vectors (kind, stmt_info))
{
case 2:
 stmt_cost += simd_costs->ld2_st2_permute_cost;
 break;

case 3:
 stmt_cost += simd_costs->ld3_st3_permute_cost;
 break;

case 4:
 stmt_cost += simd_costs->ld4_st4_permute_cost;
 break;
}



juzhe.zhong@rivai.ai
 
From: Robin Dapp
Date: 2024-02-26 23:54
To: gcc-patches; palmer; Kito Cheng; juzhe.zhong@rivai.ai
CC: rdapp.gcc; jeffreyalaw
Subject: [PATCH] RISC-V: Add initial cost handling for segment loads/stores.
Hi,
 
This has been sitting on my local tree - I've been wanting to post it
for a while but somehow forgot.
 
This patch makes segment loads and stores more expensive.  It adds
segment_load and segment_store cost fields to the common vector costs
and adds handling to adjust_stmt_cost.  In the future we could handle
this in a more fine-grained manner but let's start somehow.
 
Regtested on rv64.
 
Regards
Robin
 
gcc/ChangeLog:
 
* config/riscv/riscv-protos.h (struct common_vector_cost): Add
segment_[load/store]_cost.
* config/riscv/riscv-vector-costs.cc (costs::adjust_stmt_cost):
Handle segment loads/stores.
* config/riscv/riscv.cc: Initialize segment_[load/store]_cost
to 1.
 
gcc/testsuite/ChangeLog:
 
* gcc.dg/vect/costmodel/riscv/rvv/pr113112-4.c: Expect m4
instead of m2.
---
gcc/config/riscv/riscv-protos.h               |   4 +
gcc/config/riscv/riscv-vector-costs.cc        | 127 ++++++++++++------
gcc/config/riscv/riscv.cc                     |   4 +
.../vect/costmodel/riscv/rvv/pr113112-4.c     |   4 +-
4 files changed, 95 insertions(+), 44 deletions(-)
 
diff --git a/gcc/config/riscv/riscv-protos.h b/gcc/config/riscv/riscv-protos.h
index 80efdf2b7e5..2e8ab9990a8 100644
--- a/gcc/config/riscv/riscv-protos.h
+++ b/gcc/config/riscv/riscv-protos.h
@@ -218,6 +218,10 @@ struct common_vector_cost
   const int gather_load_cost;
   const int scatter_store_cost;
+  /* Segment load/store cost.  */
+  const int segment_load_cost;
+  const int segment_store_cost;
+
   /* Cost of a vector-to-scalar operation.  */
   const int vec_to_scalar_cost;
diff --git a/gcc/config/riscv/riscv-vector-costs.cc b/gcc/config/riscv/riscv-vector-costs.cc
index adf9c197df5..d3c12444773 100644
--- a/gcc/config/riscv/riscv-vector-costs.cc
+++ b/gcc/config/riscv/riscv-vector-costs.cc
@@ -1043,6 +1043,24 @@ costs::better_main_loop_than_p (const vector_costs *uncast_other) const
   return vector_costs::better_main_loop_than_p (other);
}
+/* Returns the group size i.e. the number of vectors to be loaded by a
+   segmented load/store instruction.  Return 0 if it is no segmented
+   load/store.  */
+static int
+segment_loadstore_group_size (enum vect_cost_for_stmt kind,
+       stmt_vec_info stmt_info)
+{
+  if ((kind == vector_load || kind == vector_store)
+      && STMT_VINFO_DATA_REF (stmt_info))
+    {
+      stmt_info = DR_GROUP_FIRST_ELEMENT (stmt_info);
+      if (stmt_info
+   && STMT_VINFO_MEMORY_ACCESS_TYPE (stmt_info) == VMAT_LOAD_STORE_LANES)
+ return DR_GROUP_SIZE (stmt_info);
+    }
+  return 0;
+}
+
/* Adjust vectorization cost after calling riscv_builtin_vectorization_cost.
    For some statement, we would like to further fine-grain tweak the cost on
    top of riscv_builtin_vectorization_cost handling which doesn't have any
@@ -1067,55 +1085,80 @@ costs::adjust_stmt_cost (enum vect_cost_for_stmt kind, loop_vec_info loop,
     case vector_load:
     case vector_store:
{
-   /* Unit-stride vector loads and stores do not have offset addressing
-      as opposed to scalar loads and stores.
-      If the address depends on a variable we need an additional
-      add/sub for each load/store in the worst case.  */
-   if (stmt_info && stmt_info->stmt)
+   if (stmt_info && stmt_info->stmt && STMT_VINFO_DATA_REF (stmt_info))
    {
-       data_reference *dr = STMT_VINFO_DATA_REF (stmt_info);
-       class loop *father = stmt_info->stmt->bb->loop_father;
-       if (!loop && father && !father->inner && father->superloops)
+       int group_size;
+       if ((group_size
+    = segment_loadstore_group_size (kind, stmt_info)) > 1)
{
-   tree ref;
-   if (TREE_CODE (dr->ref) != MEM_REF
-       || !(ref = TREE_OPERAND (dr->ref, 0))
-       || TREE_CODE (ref) != SSA_NAME)
-     break;
+   /* Segment loads and stores.  When the group size is > 1
+      the vectorizer will add a vector load/store statement for
+      each vector in the group.  Note that STMT_COST is
+      overwritten here rather than adjusted.  */
+   if (riscv_v_ext_vector_mode_p (loop->vector_mode))
+     stmt_cost
+       = (DR_IS_READ (STMT_VINFO_DATA_REF (stmt_info))
+ ? costs->vla->segment_load_cost
+ : costs->vla->segment_store_cost);
+   else
+     stmt_cost
+       = (DR_IS_READ (STMT_VINFO_DATA_REF (stmt_info))
+ ? costs->vls->segment_load_cost
+ : costs->vls->segment_store_cost);
+   break;
+   /* TODO: Indexed and ordered/unordered cost.  */
+ }
+       else
+ {
+   /* Unit-stride vector loads and stores do not have offset
+      addressing as opposed to scalar loads and stores.
+      If the address depends on a variable we need an additional
+      add/sub for each load/store in the worst case.  */
+   data_reference *dr = STMT_VINFO_DATA_REF (stmt_info);
+   class loop *father = stmt_info->stmt->bb->loop_father;
+   if (!loop && father && !father->inner && father->superloops)
+     {
+       tree ref;
+       if (TREE_CODE (dr->ref) != MEM_REF
+   || !(ref = TREE_OPERAND (dr->ref, 0))
+   || TREE_CODE (ref) != SSA_NAME)
+ break;
-   if (SSA_NAME_IS_DEFAULT_DEF (ref))
-     break;
+       if (SSA_NAME_IS_DEFAULT_DEF (ref))
+ break;
-   if (memrefs.contains ({ref, cst0}))
-     break;
+       if (memrefs.contains ({ref, cst0}))
+ break;
-   memrefs.add ({ref, cst0});
+       memrefs.add ({ref, cst0});
-   /* In case we have not seen REF before and the base address
-      is a pointer operation try a bit harder.  */
-   tree base = DR_BASE_ADDRESS (dr);
-   if (TREE_CODE (base) == POINTER_PLUS_EXPR
-       || TREE_CODE (base) == POINTER_DIFF_EXPR)
-     {
-       /* Deconstruct BASE's first operand.  If it is a binary
- operation, i.e. a base and an "offset" store this
- pair.  Only increase the stmt_cost if we haven't seen
- it before.  */
-       tree argp = TREE_OPERAND (base, 1);
-       typedef std::pair<tree, tree> addr_pair;
-       addr_pair pair;
-       if (TREE_CODE_CLASS (TREE_CODE (argp)) == tcc_binary)
+       /* In case we have not seen REF before and the base
+ address is a pointer operation try a bit harder.  */
+       tree base = DR_BASE_ADDRESS (dr);
+       if (TREE_CODE (base) == POINTER_PLUS_EXPR
+   || TREE_CODE (base) == POINTER_DIFF_EXPR)
{
-   tree argp0 = tree_strip_nop_conversions
-     (TREE_OPERAND (argp, 0));
-   tree argp1 = TREE_OPERAND (argp, 1);
-   pair = addr_pair (argp0, argp1);
-   if (memrefs.contains (pair))
-     break;
-
-   memrefs.add (pair);
-   stmt_cost += builtin_vectorization_cost (scalar_stmt,
-    NULL_TREE, 0);
+   /* Deconstruct BASE's first operand.  If it is a
+      binary operation, i.e. a base and an "offset"
+      store this pair.  Only increase the stmt_cost if
+      we haven't seen it before.  */
+   tree argp = TREE_OPERAND (base, 1);
+   typedef std::pair<tree, tree> addr_pair;
+   addr_pair pair;
+   if (TREE_CODE_CLASS (TREE_CODE (argp)) == tcc_binary)
+     {
+       tree argp0 = tree_strip_nop_conversions
+ (TREE_OPERAND (argp, 0));
+       tree argp1 = TREE_OPERAND (argp, 1);
+       pair = addr_pair (argp0, argp1);
+       if (memrefs.contains (pair))
+ break;
+
+       memrefs.add (pair);
+       stmt_cost
+ += builtin_vectorization_cost (scalar_stmt,
+        NULL_TREE, 0);
+     }
}
    }
}
diff --git a/gcc/config/riscv/riscv.cc b/gcc/config/riscv/riscv.cc
index 5e984ee2a55..6c2f0ec34f4 100644
--- a/gcc/config/riscv/riscv.cc
+++ b/gcc/config/riscv/riscv.cc
@@ -365,6 +365,8 @@ static const common_vector_cost rvv_vls_vector_cost = {
   1, /* fp_stmt_cost  */
   1, /* gather_load_cost  */
   1, /* scatter_store_cost  */
+  2, /* segment_load_cost  */
+  2, /* segment_store_cost  */
   1, /* vec_to_scalar_cost  */
   1, /* scalar_to_vec_cost  */
   1, /* permute_cost  */
@@ -381,6 +383,8 @@ static const scalable_vector_cost rvv_vla_vector_cost = {
     1, /* fp_stmt_cost  */
     1, /* gather_load_cost  */
     1, /* scatter_store_cost  */
+    2, /* segment_load_cost  */
+    2, /* segment_store_cost  */
     1, /* vec_to_scalar_cost  */
     1, /* scalar_to_vec_cost  */
     1, /* permute_cost  */
diff --git a/gcc/testsuite/gcc.dg/vect/costmodel/riscv/rvv/pr113112-4.c b/gcc/testsuite/gcc.dg/vect/costmodel/riscv/rvv/pr113112-4.c
index 5c55a66ed77..bdeedaf5224 100644
--- a/gcc/testsuite/gcc.dg/vect/costmodel/riscv/rvv/pr113112-4.c
+++ b/gcc/testsuite/gcc.dg/vect/costmodel/riscv/rvv/pr113112-4.c
@@ -21,8 +21,8 @@ void move_replacements (rtx *x, rtx *y, int n_replacements)
       }
}
-/* { dg-final { scan-assembler {e64,m2} } } */
-/* { dg-final { scan-assembler-not {e64,m4} } } */
+/* { dg-final { scan-assembler-not {e64,m2} } } */
+/* { dg-final { scan-assembler {e64,m4} } } */
/* { dg-final { scan-assembler-not {jr} } } */
/* { dg-final { scan-assembler {ret} } } */
/* { dg-final { scan-assembler-not {sp} } } */

> This patch looks odd to me.
> I don't see memrefs in the trunk code.

It's on top of the vle/vse offset handling patch from
a while back that I haven't committed yet.

> Also, I prefer list all cost in cost tune info for NF = 2 ~ 8 like ARM SVE does:
I don't mind having separate costs for each but I figured they
scale anyway with the number of vectors already.  Attached v2
is more similar to aarch64.

Regards
 Robin

Subject: [PATCH v2] RISC-V: Add initial cost handling for segment
 loads/stores.

This patch makes segment loads and stores more expensive.  It adds
segment_permute_2 (as well as 4 and 8) cost fields to the common vector
costs and adds handling to adjust_stmt_cost.

gcc/ChangeLog:

	* config/riscv/riscv-protos.h (struct common_vector_cost): Add
	segment_permute cost.
	* config/riscv/riscv-vector-costs.cc (costs::adjust_stmt_cost):
	Handle segment loads/stores.
	* config/riscv/riscv.cc: Initialize segment_permute_[248] to 1.
---
 gcc/config/riscv/riscv-protos.h        |   5 +
 gcc/config/riscv/riscv-vector-costs.cc | 139 +++++++++++++++++--------
 gcc/config/riscv/riscv.cc              |   6 ++
 3 files changed, 108 insertions(+), 42 deletions(-)

diff --git a/gcc/config/riscv/riscv-protos.h b/gcc/config/riscv/riscv-protos.h
index 80efdf2b7e5..9b737aca1a3 100644
--- a/gcc/config/riscv/riscv-protos.h
+++ b/gcc/config/riscv/riscv-protos.h
@@ -218,6 +218,11 @@ struct common_vector_cost
   const int gather_load_cost;
   const int scatter_store_cost;
 
+  /* Segment load/store permute cost.  */
+  const int segment_permute_2;
+  const int segment_permute_4;
+  const int segment_permute_8;
+
   /* Cost of a vector-to-scalar operation.  */
   const int vec_to_scalar_cost;
 
diff --git a/gcc/config/riscv/riscv-vector-costs.cc b/gcc/config/riscv/riscv-vector-costs.cc
index adf9c197df5..c8178d71101 100644
--- a/gcc/config/riscv/riscv-vector-costs.cc
+++ b/gcc/config/riscv/riscv-vector-costs.cc
@@ -1043,6 +1043,25 @@ costs::better_main_loop_than_p (const vector_costs *uncast_other) const
   return vector_costs::better_main_loop_than_p (other);
 }
 
+/* Returns the group size i.e. the number of vectors to be loaded by a
+   segmented load/store instruction.  Return 0 if it is no segmented
+   load/store.  */
+static int
+segment_loadstore_group_size (enum vect_cost_for_stmt kind,
+			      stmt_vec_info stmt_info)
+{
+  if (stmt_info
+      && (kind == vector_load || kind == vector_store)
+      && STMT_VINFO_DATA_REF (stmt_info))
+    {
+      stmt_info = DR_GROUP_FIRST_ELEMENT (stmt_info);
+      if (stmt_info
+	  && STMT_VINFO_MEMORY_ACCESS_TYPE (stmt_info) == VMAT_LOAD_STORE_LANES)
+	return DR_GROUP_SIZE (stmt_info);
+    }
+  return 0;
+}
+
 /* Adjust vectorization cost after calling riscv_builtin_vectorization_cost.
    For some statement, we would like to further fine-grain tweak the cost on
    top of riscv_builtin_vectorization_cost handling which doesn't have any
@@ -1067,55 +1086,91 @@ costs::adjust_stmt_cost (enum vect_cost_for_stmt kind, loop_vec_info loop,
     case vector_load:
     case vector_store:
 	{
-	  /* Unit-stride vector loads and stores do not have offset addressing
-	     as opposed to scalar loads and stores.
-	     If the address depends on a variable we need an additional
-	     add/sub for each load/store in the worst case.  */
-	  if (stmt_info && stmt_info->stmt)
+	  if (stmt_info && stmt_info->stmt && STMT_VINFO_DATA_REF (stmt_info))
 	    {
-	      data_reference *dr = STMT_VINFO_DATA_REF (stmt_info);
-	      class loop *father = stmt_info->stmt->bb->loop_father;
-	      if (!loop && father && !father->inner && father->superloops)
+	      /* Segment loads and stores.  When the group size is > 1
+		 the vectorizer will add a vector load/store statement for
+		 each vector in the group.  Here we additionally add permute
+		 costs for each.  */
+	      /* TODO: Indexed and ordered/unordered cost.  */
+	      int group_size = segment_loadstore_group_size (kind, stmt_info);
+	      if (group_size > 1)
+		{
+		  switch (group_size)
+		    {
+		    case 2:
+		      if (riscv_v_ext_vector_mode_p (loop->vector_mode))
+			stmt_cost += costs->vla->segment_permute_2;
+		      else
+			stmt_cost += costs->vls->segment_permute_2;
+		      break;
+		    case 4:
+		      if (riscv_v_ext_vector_mode_p (loop->vector_mode))
+			stmt_cost += costs->vla->segment_permute_4;
+		      else
+			stmt_cost += costs->vls->segment_permute_4;
+		      break;
+		    case 8:
+		      if (riscv_v_ext_vector_mode_p (loop->vector_mode))
+			stmt_cost += costs->vla->segment_permute_8;
+		      else
+			stmt_cost += costs->vls->segment_permute_8;
+		      break;
+		    default:
+		      break;
+		    }
+		}
+	      else
 		{
-		  tree ref;
-		  if (TREE_CODE (dr->ref) != MEM_REF
-		      || !(ref = TREE_OPERAND (dr->ref, 0))
-		      || TREE_CODE (ref) != SSA_NAME)
-		    break;
+		  /* Unit-stride vector loads and stores do not have offset
+		     addressing as opposed to scalar loads and stores.
+		     If the address depends on a variable we need an additional
+		     add/sub for each load/store in the worst case.  */
+		  data_reference *dr = STMT_VINFO_DATA_REF (stmt_info);
+		  class loop *father = stmt_info->stmt->bb->loop_father;
+		  if (!loop && father && !father->inner && father->superloops)
+		    {
+		      tree ref;
+		      if (TREE_CODE (dr->ref) != MEM_REF
+			  || !(ref = TREE_OPERAND (dr->ref, 0))
+			  || TREE_CODE (ref) != SSA_NAME)
+			break;
 
-		  if (SSA_NAME_IS_DEFAULT_DEF (ref))
-		    break;
+		      if (SSA_NAME_IS_DEFAULT_DEF (ref))
+			break;
 
-		  if (memrefs.contains ({ref, cst0}))
-		    break;
+		      if (memrefs.contains ({ref, cst0}))
+			break;
 
-		  memrefs.add ({ref, cst0});
+		      memrefs.add ({ref, cst0});
 
-		  /* In case we have not seen REF before and the base address
-		     is a pointer operation try a bit harder.  */
-		  tree base = DR_BASE_ADDRESS (dr);
-		  if (TREE_CODE (base) == POINTER_PLUS_EXPR
-		      || TREE_CODE (base) == POINTER_DIFF_EXPR)
-		    {
-		      /* Deconstruct BASE's first operand.  If it is a binary
-			 operation, i.e. a base and an "offset" store this
-			 pair.  Only increase the stmt_cost if we haven't seen
-			 it before.  */
-		      tree argp = TREE_OPERAND (base, 1);
-		      typedef std::pair<tree, tree> addr_pair;
-		      addr_pair pair;
-		      if (TREE_CODE_CLASS (TREE_CODE (argp)) == tcc_binary)
+		      /* In case we have not seen REF before and the base
+			 address is a pointer operation try a bit harder.  */
+		      tree base = DR_BASE_ADDRESS (dr);
+		      if (TREE_CODE (base) == POINTER_PLUS_EXPR
+			  || TREE_CODE (base) == POINTER_DIFF_EXPR)
 			{
-			  tree argp0 = tree_strip_nop_conversions
-			    (TREE_OPERAND (argp, 0));
-			  tree argp1 = TREE_OPERAND (argp, 1);
-			  pair = addr_pair (argp0, argp1);
-			  if (memrefs.contains (pair))
-			    break;
-
-			  memrefs.add (pair);
-			  stmt_cost += builtin_vectorization_cost (scalar_stmt,
-								   NULL_TREE, 0);
+			  /* Deconstruct BASE's first operand.  If it is a
+			     binary operation, i.e. a base and an "offset"
+			     store this pair.  Only increase the stmt_cost if
+			     we haven't seen it before.  */
+			  tree argp = TREE_OPERAND (base, 1);
+			  typedef std::pair<tree, tree> addr_pair;
+			  addr_pair pair;
+			  if (TREE_CODE_CLASS (TREE_CODE (argp)) == tcc_binary)
+			    {
+			      tree argp0 = tree_strip_nop_conversions
+				(TREE_OPERAND (argp, 0));
+			      tree argp1 = TREE_OPERAND (argp, 1);
+			      pair = addr_pair (argp0, argp1);
+			      if (memrefs.contains (pair))
+				break;
+
+			      memrefs.add (pair);
+			      stmt_cost
+				+= builtin_vectorization_cost (scalar_stmt,
+							       NULL_TREE, 0);
+			    }
 			}
 		    }
 		}
diff --git a/gcc/config/riscv/riscv.cc b/gcc/config/riscv/riscv.cc
index 5e984ee2a55..141278ec35e 100644
--- a/gcc/config/riscv/riscv.cc
+++ b/gcc/config/riscv/riscv.cc
@@ -365,6 +365,9 @@ static const common_vector_cost rvv_vls_vector_cost = {
   1, /* fp_stmt_cost  */
   1, /* gather_load_cost  */
   1, /* scatter_store_cost  */
+  1, /* segment_permute (2) */
+  1, /* segment_permute (4) */
+  1, /* segment_permute (8) */
   1, /* vec_to_scalar_cost  */
   1, /* scalar_to_vec_cost  */
   1, /* permute_cost  */
@@ -381,6 +384,9 @@ static const scalable_vector_cost rvv_vla_vector_cost = {
     1, /* fp_stmt_cost  */
     1, /* gather_load_cost  */
     1, /* scatter_store_cost  */
+    1, /* segment_permute (2) */
+    1, /* segment_permute (4) */
+    1, /* segment_permute (8) */
     1, /* vec_to_scalar_cost  */
     1, /* scalar_to_vec_cost  */
     1, /* permute_cost  */

+  /* Segment load/store permute cost.  */
+  const int segment_permute_2;
+  const int segment_permute_4;
+  const int segment_permute_8;

Why do we only have 2/4/8, I think we should have 2/3/4/5/6/7/8


juzhe.zhong@rivai.ai
 
From: Robin Dapp
Date: 2024-02-28 05:27
To: juzhe.zhong@rivai.ai; gcc-patches; palmer; kito.cheng
CC: rdapp.gcc; jeffreyalaw
Subject: Re: [PATCH] RISC-V: Add initial cost handling for segment loads/stores.
> This patch looks odd to me.
> I don't see memrefs in the trunk code.
 
It's on top of the vle/vse offset handling patch from
a while back that I haven't committed yet.
 
> Also, I prefer list all cost in cost tune info for NF = 2 ~ 8 like ARM SVE does:
I don't mind having separate costs for each but I figured they
scale anyway with the number of vectors already.  Attached v2
is more similar to aarch64.
 
Regards
Robin
 
Subject: [PATCH v2] RISC-V: Add initial cost handling for segment
loads/stores.
 
This patch makes segment loads and stores more expensive.  It adds
segment_permute_2 (as well as 4 and 8) cost fields to the common vector
costs and adds handling to adjust_stmt_cost.
 
gcc/ChangeLog:
 
* config/riscv/riscv-protos.h (struct common_vector_cost): Add
segment_permute cost.
* config/riscv/riscv-vector-costs.cc (costs::adjust_stmt_cost):
Handle segment loads/stores.
* config/riscv/riscv.cc: Initialize segment_permute_[248] to 1.
---
gcc/config/riscv/riscv-protos.h        |   5 +
gcc/config/riscv/riscv-vector-costs.cc | 139 +++++++++++++++++--------
gcc/config/riscv/riscv.cc              |   6 ++
3 files changed, 108 insertions(+), 42 deletions(-)
 
diff --git a/gcc/config/riscv/riscv-protos.h b/gcc/config/riscv/riscv-protos.h
index 80efdf2b7e5..9b737aca1a3 100644
--- a/gcc/config/riscv/riscv-protos.h
+++ b/gcc/config/riscv/riscv-protos.h
@@ -218,6 +218,11 @@ struct common_vector_cost
   const int gather_load_cost;
   const int scatter_store_cost;
+  /* Segment load/store permute cost.  */
+  const int segment_permute_2;
+  const int segment_permute_4;
+  const int segment_permute_8;
+
   /* Cost of a vector-to-scalar operation.  */
   const int vec_to_scalar_cost;
diff --git a/gcc/config/riscv/riscv-vector-costs.cc b/gcc/config/riscv/riscv-vector-costs.cc
index adf9c197df5..c8178d71101 100644
--- a/gcc/config/riscv/riscv-vector-costs.cc
+++ b/gcc/config/riscv/riscv-vector-costs.cc
@@ -1043,6 +1043,25 @@ costs::better_main_loop_than_p (const vector_costs *uncast_other) const
   return vector_costs::better_main_loop_than_p (other);
}
+/* Returns the group size i.e. the number of vectors to be loaded by a
+   segmented load/store instruction.  Return 0 if it is no segmented
+   load/store.  */
+static int
+segment_loadstore_group_size (enum vect_cost_for_stmt kind,
+       stmt_vec_info stmt_info)
+{
+  if (stmt_info
+      && (kind == vector_load || kind == vector_store)
+      && STMT_VINFO_DATA_REF (stmt_info))
+    {
+      stmt_info = DR_GROUP_FIRST_ELEMENT (stmt_info);
+      if (stmt_info
+   && STMT_VINFO_MEMORY_ACCESS_TYPE (stmt_info) == VMAT_LOAD_STORE_LANES)
+ return DR_GROUP_SIZE (stmt_info);
+    }
+  return 0;
+}
+
/* Adjust vectorization cost after calling riscv_builtin_vectorization_cost.
    For some statement, we would like to further fine-grain tweak the cost on
    top of riscv_builtin_vectorization_cost handling which doesn't have any
@@ -1067,55 +1086,91 @@ costs::adjust_stmt_cost (enum vect_cost_for_stmt kind, loop_vec_info loop,
     case vector_load:
     case vector_store:
{
-   /* Unit-stride vector loads and stores do not have offset addressing
-      as opposed to scalar loads and stores.
-      If the address depends on a variable we need an additional
-      add/sub for each load/store in the worst case.  */
-   if (stmt_info && stmt_info->stmt)
+   if (stmt_info && stmt_info->stmt && STMT_VINFO_DATA_REF (stmt_info))
    {
-       data_reference *dr = STMT_VINFO_DATA_REF (stmt_info);
-       class loop *father = stmt_info->stmt->bb->loop_father;
-       if (!loop && father && !father->inner && father->superloops)
+       /* Segment loads and stores.  When the group size is > 1
+ the vectorizer will add a vector load/store statement for
+ each vector in the group.  Here we additionally add permute
+ costs for each.  */
+       /* TODO: Indexed and ordered/unordered cost.  */
+       int group_size = segment_loadstore_group_size (kind, stmt_info);
+       if (group_size > 1)
+ {
+   switch (group_size)
+     {
+     case 2:
+       if (riscv_v_ext_vector_mode_p (loop->vector_mode))
+ stmt_cost += costs->vla->segment_permute_2;
+       else
+ stmt_cost += costs->vls->segment_permute_2;
+       break;
+     case 4:
+       if (riscv_v_ext_vector_mode_p (loop->vector_mode))
+ stmt_cost += costs->vla->segment_permute_4;
+       else
+ stmt_cost += costs->vls->segment_permute_4;
+       break;
+     case 8:
+       if (riscv_v_ext_vector_mode_p (loop->vector_mode))
+ stmt_cost += costs->vla->segment_permute_8;
+       else
+ stmt_cost += costs->vls->segment_permute_8;
+       break;
+     default:
+       break;
+     }
+ }
+       else
{
-   tree ref;
-   if (TREE_CODE (dr->ref) != MEM_REF
-       || !(ref = TREE_OPERAND (dr->ref, 0))
-       || TREE_CODE (ref) != SSA_NAME)
-     break;
+   /* Unit-stride vector loads and stores do not have offset
+      addressing as opposed to scalar loads and stores.
+      If the address depends on a variable we need an additional
+      add/sub for each load/store in the worst case.  */
+   data_reference *dr = STMT_VINFO_DATA_REF (stmt_info);
+   class loop *father = stmt_info->stmt->bb->loop_father;
+   if (!loop && father && !father->inner && father->superloops)
+     {
+       tree ref;
+       if (TREE_CODE (dr->ref) != MEM_REF
+   || !(ref = TREE_OPERAND (dr->ref, 0))
+   || TREE_CODE (ref) != SSA_NAME)
+ break;
-   if (SSA_NAME_IS_DEFAULT_DEF (ref))
-     break;
+       if (SSA_NAME_IS_DEFAULT_DEF (ref))
+ break;
-   if (memrefs.contains ({ref, cst0}))
-     break;
+       if (memrefs.contains ({ref, cst0}))
+ break;
-   memrefs.add ({ref, cst0});
+       memrefs.add ({ref, cst0});
-   /* In case we have not seen REF before and the base address
-      is a pointer operation try a bit harder.  */
-   tree base = DR_BASE_ADDRESS (dr);
-   if (TREE_CODE (base) == POINTER_PLUS_EXPR
-       || TREE_CODE (base) == POINTER_DIFF_EXPR)
-     {
-       /* Deconstruct BASE's first operand.  If it is a binary
- operation, i.e. a base and an "offset" store this
- pair.  Only increase the stmt_cost if we haven't seen
- it before.  */
-       tree argp = TREE_OPERAND (base, 1);
-       typedef std::pair<tree, tree> addr_pair;
-       addr_pair pair;
-       if (TREE_CODE_CLASS (TREE_CODE (argp)) == tcc_binary)
+       /* In case we have not seen REF before and the base
+ address is a pointer operation try a bit harder.  */
+       tree base = DR_BASE_ADDRESS (dr);
+       if (TREE_CODE (base) == POINTER_PLUS_EXPR
+   || TREE_CODE (base) == POINTER_DIFF_EXPR)
{
-   tree argp0 = tree_strip_nop_conversions
-     (TREE_OPERAND (argp, 0));
-   tree argp1 = TREE_OPERAND (argp, 1);
-   pair = addr_pair (argp0, argp1);
-   if (memrefs.contains (pair))
-     break;
-
-   memrefs.add (pair);
-   stmt_cost += builtin_vectorization_cost (scalar_stmt,
-    NULL_TREE, 0);
+   /* Deconstruct BASE's first operand.  If it is a
+      binary operation, i.e. a base and an "offset"
+      store this pair.  Only increase the stmt_cost if
+      we haven't seen it before.  */
+   tree argp = TREE_OPERAND (base, 1);
+   typedef std::pair<tree, tree> addr_pair;
+   addr_pair pair;
+   if (TREE_CODE_CLASS (TREE_CODE (argp)) == tcc_binary)
+     {
+       tree argp0 = tree_strip_nop_conversions
+ (TREE_OPERAND (argp, 0));
+       tree argp1 = TREE_OPERAND (argp, 1);
+       pair = addr_pair (argp0, argp1);
+       if (memrefs.contains (pair))
+ break;
+
+       memrefs.add (pair);
+       stmt_cost
+ += builtin_vectorization_cost (scalar_stmt,
+        NULL_TREE, 0);
+     }
}
    }
}
diff --git a/gcc/config/riscv/riscv.cc b/gcc/config/riscv/riscv.cc
index 5e984ee2a55..141278ec35e 100644
--- a/gcc/config/riscv/riscv.cc
+++ b/gcc/config/riscv/riscv.cc
@@ -365,6 +365,9 @@ static const common_vector_cost rvv_vls_vector_cost = {
   1, /* fp_stmt_cost  */
   1, /* gather_load_cost  */
   1, /* scatter_store_cost  */
+  1, /* segment_permute (2) */
+  1, /* segment_permute (4) */
+  1, /* segment_permute (8) */
   1, /* vec_to_scalar_cost  */
   1, /* scalar_to_vec_cost  */
   1, /* permute_cost  */
@@ -381,6 +384,9 @@ static const scalable_vector_cost rvv_vla_vector_cost = {
     1, /* fp_stmt_cost  */
     1, /* gather_load_cost  */
     1, /* scatter_store_cost  */
+    1, /* segment_permute (2) */
+    1, /* segment_permute (4) */
+    1, /* segment_permute (8) */
     1, /* vec_to_scalar_cost  */
     1, /* scalar_to_vec_cost  */
     1, /* permute_cost  */

> +  /* Segment load/store permute cost.  */
> +  const int segment_permute_2;
> +  const int segment_permute_4;
> +  const int segment_permute_8;
> 
> Why do we only have 2/4/8, I think we should have 2/3/4/5/6/7/8

No idea why I posted that (wrong) version, I used it for
some testing locally.  Attached is the proper version, still
called it v3...

Regards
 Robin

Subject: [PATCH v3] RISC-V: Add initial cost handling for segment
 loads/stores.

This patch makes segment loads and stores more expensive.  It adds
segment_permute_2 as well as 3 to 8 cost fields to the common vector
costs and adds handling to adjust_stmt_cost.

gcc/ChangeLog:

	* config/riscv/riscv-protos.h (struct common_vector_cost): Add
	segment_permute cost.
	* config/riscv/riscv-vector-costs.cc (costs::adjust_stmt_cost):
	Handle segment loads/stores.
	* config/riscv/riscv.cc: Initialize segment_permute_[2-8] to 1.
---
 gcc/config/riscv/riscv-protos.h        |   9 ++
 gcc/config/riscv/riscv-vector-costs.cc | 163 ++++++++++++++++++-------
 gcc/config/riscv/riscv.cc              |  14 +++
 3 files changed, 144 insertions(+), 42 deletions(-)

diff --git a/gcc/config/riscv/riscv-protos.h b/gcc/config/riscv/riscv-protos.h
index 80efdf2b7e5..90d1fcbb3b1 100644
--- a/gcc/config/riscv/riscv-protos.h
+++ b/gcc/config/riscv/riscv-protos.h
@@ -218,6 +218,15 @@ struct common_vector_cost
   const int gather_load_cost;
   const int scatter_store_cost;
 
+  /* Segment load/store permute cost.  */
+  const int segment_permute_2;
+  const int segment_permute_3;
+  const int segment_permute_4;
+  const int segment_permute_5;
+  const int segment_permute_6;
+  const int segment_permute_7;
+  const int segment_permute_8;
+
   /* Cost of a vector-to-scalar operation.  */
   const int vec_to_scalar_cost;
 
diff --git a/gcc/config/riscv/riscv-vector-costs.cc b/gcc/config/riscv/riscv-vector-costs.cc
index adf9c197df5..f4da213fe14 100644
--- a/gcc/config/riscv/riscv-vector-costs.cc
+++ b/gcc/config/riscv/riscv-vector-costs.cc
@@ -1043,6 +1043,25 @@ costs::better_main_loop_than_p (const vector_costs *uncast_other) const
   return vector_costs::better_main_loop_than_p (other);
 }
 
+/* Returns the group size i.e. the number of vectors to be loaded by a
+   segmented load/store instruction.  Return 0 if it is no segmented
+   load/store.  */
+static int
+segment_loadstore_group_size (enum vect_cost_for_stmt kind,
+			      stmt_vec_info stmt_info)
+{
+  if (stmt_info
+      && (kind == vector_load || kind == vector_store)
+      && STMT_VINFO_DATA_REF (stmt_info))
+    {
+      stmt_info = DR_GROUP_FIRST_ELEMENT (stmt_info);
+      if (stmt_info
+	  && STMT_VINFO_MEMORY_ACCESS_TYPE (stmt_info) == VMAT_LOAD_STORE_LANES)
+	return DR_GROUP_SIZE (stmt_info);
+    }
+  return 0;
+}
+
 /* Adjust vectorization cost after calling riscv_builtin_vectorization_cost.
    For some statement, we would like to further fine-grain tweak the cost on
    top of riscv_builtin_vectorization_cost handling which doesn't have any
@@ -1067,55 +1086,115 @@ costs::adjust_stmt_cost (enum vect_cost_for_stmt kind, loop_vec_info loop,
     case vector_load:
     case vector_store:
 	{
-	  /* Unit-stride vector loads and stores do not have offset addressing
-	     as opposed to scalar loads and stores.
-	     If the address depends on a variable we need an additional
-	     add/sub for each load/store in the worst case.  */
-	  if (stmt_info && stmt_info->stmt)
+	  if (stmt_info && stmt_info->stmt && STMT_VINFO_DATA_REF (stmt_info))
 	    {
-	      data_reference *dr = STMT_VINFO_DATA_REF (stmt_info);
-	      class loop *father = stmt_info->stmt->bb->loop_father;
-	      if (!loop && father && !father->inner && father->superloops)
+	      /* Segment loads and stores.  When the group size is > 1
+		 the vectorizer will add a vector load/store statement for
+		 each vector in the group.  Here we additionally add permute
+		 costs for each.  */
+	      /* TODO: Indexed and ordered/unordered cost.  */
+	      int group_size = segment_loadstore_group_size (kind, stmt_info);
+	      if (group_size > 1)
+		{
+		  switch (group_size)
+		    {
+		    case 2:
+		      if (riscv_v_ext_vector_mode_p (loop->vector_mode))
+			stmt_cost += costs->vla->segment_permute_2;
+		      else
+			stmt_cost += costs->vls->segment_permute_2;
+		      break;
+		    case 3:
+		      if (riscv_v_ext_vector_mode_p (loop->vector_mode))
+			stmt_cost += costs->vla->segment_permute_3;
+		      else
+			stmt_cost += costs->vls->segment_permute_3;
+		      break;
+		    case 4:
+		      if (riscv_v_ext_vector_mode_p (loop->vector_mode))
+			stmt_cost += costs->vla->segment_permute_4;
+		      else
+			stmt_cost += costs->vls->segment_permute_4;
+		      break;
+		    case 5:
+		      if (riscv_v_ext_vector_mode_p (loop->vector_mode))
+			stmt_cost += costs->vla->segment_permute_5;
+		      else
+			stmt_cost += costs->vls->segment_permute_5;
+		      break;
+		    case 6:
+		      if (riscv_v_ext_vector_mode_p (loop->vector_mode))
+			stmt_cost += costs->vla->segment_permute_6;
+		      else
+			stmt_cost += costs->vls->segment_permute_6;
+		      break;
+		    case 7:
+		      if (riscv_v_ext_vector_mode_p (loop->vector_mode))
+			stmt_cost += costs->vla->segment_permute_7;
+		      else
+			stmt_cost += costs->vls->segment_permute_7;
+		      break;
+		    case 8:
+		      if (riscv_v_ext_vector_mode_p (loop->vector_mode))
+			stmt_cost += costs->vla->segment_permute_8;
+		      else
+			stmt_cost += costs->vls->segment_permute_8;
+		      break;
+		    default:
+		      break;
+		    }
+		}
+	      else
 		{
-		  tree ref;
-		  if (TREE_CODE (dr->ref) != MEM_REF
-		      || !(ref = TREE_OPERAND (dr->ref, 0))
-		      || TREE_CODE (ref) != SSA_NAME)
-		    break;
+		  /* Unit-stride vector loads and stores do not have offset
+		     addressing as opposed to scalar loads and stores.
+		     If the address depends on a variable we need an additional
+		     add/sub for each load/store in the worst case.  */
+		  data_reference *dr = STMT_VINFO_DATA_REF (stmt_info);
+		  class loop *father = stmt_info->stmt->bb->loop_father;
+		  if (!loop && father && !father->inner && father->superloops)
+		    {
+		      tree ref;
+		      if (TREE_CODE (dr->ref) != MEM_REF
+			  || !(ref = TREE_OPERAND (dr->ref, 0))
+			  || TREE_CODE (ref) != SSA_NAME)
+			break;
 
-		  if (SSA_NAME_IS_DEFAULT_DEF (ref))
-		    break;
+		      if (SSA_NAME_IS_DEFAULT_DEF (ref))
+			break;
 
-		  if (memrefs.contains ({ref, cst0}))
-		    break;
+		      if (memrefs.contains ({ref, cst0}))
+			break;
 
-		  memrefs.add ({ref, cst0});
+		      memrefs.add ({ref, cst0});
 
-		  /* In case we have not seen REF before and the base address
-		     is a pointer operation try a bit harder.  */
-		  tree base = DR_BASE_ADDRESS (dr);
-		  if (TREE_CODE (base) == POINTER_PLUS_EXPR
-		      || TREE_CODE (base) == POINTER_DIFF_EXPR)
-		    {
-		      /* Deconstruct BASE's first operand.  If it is a binary
-			 operation, i.e. a base and an "offset" store this
-			 pair.  Only increase the stmt_cost if we haven't seen
-			 it before.  */
-		      tree argp = TREE_OPERAND (base, 1);
-		      typedef std::pair<tree, tree> addr_pair;
-		      addr_pair pair;
-		      if (TREE_CODE_CLASS (TREE_CODE (argp)) == tcc_binary)
+		      /* In case we have not seen REF before and the base
+			 address is a pointer operation try a bit harder.  */
+		      tree base = DR_BASE_ADDRESS (dr);
+		      if (TREE_CODE (base) == POINTER_PLUS_EXPR
+			  || TREE_CODE (base) == POINTER_DIFF_EXPR)
 			{
-			  tree argp0 = tree_strip_nop_conversions
-			    (TREE_OPERAND (argp, 0));
-			  tree argp1 = TREE_OPERAND (argp, 1);
-			  pair = addr_pair (argp0, argp1);
-			  if (memrefs.contains (pair))
-			    break;
-
-			  memrefs.add (pair);
-			  stmt_cost += builtin_vectorization_cost (scalar_stmt,
-								   NULL_TREE, 0);
+			  /* Deconstruct BASE's first operand.  If it is a
+			     binary operation, i.e. a base and an "offset"
+			     store this pair.  Only increase the stmt_cost if
+			     we haven't seen it before.  */
+			  tree argp = TREE_OPERAND (base, 1);
+			  typedef std::pair<tree, tree> addr_pair;
+			  addr_pair pair;
+			  if (TREE_CODE_CLASS (TREE_CODE (argp)) == tcc_binary)
+			    {
+			      tree argp0 = tree_strip_nop_conversions
+				(TREE_OPERAND (argp, 0));
+			      tree argp1 = TREE_OPERAND (argp, 1);
+			      pair = addr_pair (argp0, argp1);
+			      if (memrefs.contains (pair))
+				break;
+
+			      memrefs.add (pair);
+			      stmt_cost
+				+= builtin_vectorization_cost (scalar_stmt,
+							       NULL_TREE, 0);
+			    }
 			}
 		    }
 		}
diff --git a/gcc/config/riscv/riscv.cc b/gcc/config/riscv/riscv.cc
index 5e984ee2a55..874a42873d7 100644
--- a/gcc/config/riscv/riscv.cc
+++ b/gcc/config/riscv/riscv.cc
@@ -365,6 +365,13 @@ static const common_vector_cost rvv_vls_vector_cost = {
   1, /* fp_stmt_cost  */
   1, /* gather_load_cost  */
   1, /* scatter_store_cost  */
+  1, /* segment_permute (2) */
+  1, /* segment_permute (3) */
+  1, /* segment_permute (4) */
+  1, /* segment_permute (5) */
+  1, /* segment_permute (6) */
+  1, /* segment_permute (7) */
+  1, /* segment_permute (8) */
   1, /* vec_to_scalar_cost  */
   1, /* scalar_to_vec_cost  */
   1, /* permute_cost  */
@@ -381,6 +388,13 @@ static const scalable_vector_cost rvv_vla_vector_cost = {
     1, /* fp_stmt_cost  */
     1, /* gather_load_cost  */
     1, /* scatter_store_cost  */
+    1, /* segment_permute (2) */
+    1, /* segment_permute (3) */
+    1, /* segment_permute (4) */
+    1, /* segment_permute (5) */
+    1, /* segment_permute (6) */
+    1, /* segment_permute (7) */
+    1, /* segment_permute (8) */
     1, /* vec_to_scalar_cost  */
     1, /* scalar_to_vec_cost  */
     1, /* permute_cost  */

Could you rebase to the trunk ? I don't think segment load store cost depends on previous patch you sent.



juzhe.zhong@rivai.ai
 
From: Robin Dapp
Date: 2024-03-01 23:07
To: 钟居哲; gcc-patches; palmer; kito.cheng
CC: rdapp.gcc; Jeff Law
Subject: Re: [PATCH] RISC-V: Add initial cost handling for segment loads/stores.
> +  /* Segment load/store permute cost.  */
> +  const int segment_permute_2;
> +  const int segment_permute_4;
> +  const int segment_permute_8;
> 
> Why do we only have 2/4/8, I think we should have 2/3/4/5/6/7/8
 
No idea why I posted that (wrong) version, I used it for
some testing locally.  Attached is the proper version, still
called it v3...
 
Regards
Robin
 
Subject: [PATCH v3] RISC-V: Add initial cost handling for segment
loads/stores.
 
This patch makes segment loads and stores more expensive.  It adds
segment_permute_2 as well as 3 to 8 cost fields to the common vector
costs and adds handling to adjust_stmt_cost.
 
gcc/ChangeLog:
 
* config/riscv/riscv-protos.h (struct common_vector_cost): Add
segment_permute cost.
* config/riscv/riscv-vector-costs.cc (costs::adjust_stmt_cost):
Handle segment loads/stores.
* config/riscv/riscv.cc: Initialize segment_permute_[2-8] to 1.
---
gcc/config/riscv/riscv-protos.h        |   9 ++
gcc/config/riscv/riscv-vector-costs.cc | 163 ++++++++++++++++++-------
gcc/config/riscv/riscv.cc              |  14 +++
3 files changed, 144 insertions(+), 42 deletions(-)
 
diff --git a/gcc/config/riscv/riscv-protos.h b/gcc/config/riscv/riscv-protos.h
index 80efdf2b7e5..90d1fcbb3b1 100644
--- a/gcc/config/riscv/riscv-protos.h
+++ b/gcc/config/riscv/riscv-protos.h
@@ -218,6 +218,15 @@ struct common_vector_cost
   const int gather_load_cost;
   const int scatter_store_cost;
+  /* Segment load/store permute cost.  */
+  const int segment_permute_2;
+  const int segment_permute_3;
+  const int segment_permute_4;
+  const int segment_permute_5;
+  const int segment_permute_6;
+  const int segment_permute_7;
+  const int segment_permute_8;
+
   /* Cost of a vector-to-scalar operation.  */
   const int vec_to_scalar_cost;
diff --git a/gcc/config/riscv/riscv-vector-costs.cc b/gcc/config/riscv/riscv-vector-costs.cc
index adf9c197df5..f4da213fe14 100644
--- a/gcc/config/riscv/riscv-vector-costs.cc
+++ b/gcc/config/riscv/riscv-vector-costs.cc
@@ -1043,6 +1043,25 @@ costs::better_main_loop_than_p (const vector_costs *uncast_other) const
   return vector_costs::better_main_loop_than_p (other);
}
+/* Returns the group size i.e. the number of vectors to be loaded by a
+   segmented load/store instruction.  Return 0 if it is no segmented
+   load/store.  */
+static int
+segment_loadstore_group_size (enum vect_cost_for_stmt kind,
+       stmt_vec_info stmt_info)
+{
+  if (stmt_info
+      && (kind == vector_load || kind == vector_store)
+      && STMT_VINFO_DATA_REF (stmt_info))
+    {
+      stmt_info = DR_GROUP_FIRST_ELEMENT (stmt_info);
+      if (stmt_info
+   && STMT_VINFO_MEMORY_ACCESS_TYPE (stmt_info) == VMAT_LOAD_STORE_LANES)
+ return DR_GROUP_SIZE (stmt_info);
+    }
+  return 0;
+}
+
/* Adjust vectorization cost after calling riscv_builtin_vectorization_cost.
    For some statement, we would like to further fine-grain tweak the cost on
    top of riscv_builtin_vectorization_cost handling which doesn't have any
@@ -1067,55 +1086,115 @@ costs::adjust_stmt_cost (enum vect_cost_for_stmt kind, loop_vec_info loop,
     case vector_load:
     case vector_store:
{
-   /* Unit-stride vector loads and stores do not have offset addressing
-      as opposed to scalar loads and stores.
-      If the address depends on a variable we need an additional
-      add/sub for each load/store in the worst case.  */
-   if (stmt_info && stmt_info->stmt)
+   if (stmt_info && stmt_info->stmt && STMT_VINFO_DATA_REF (stmt_info))
    {
-       data_reference *dr = STMT_VINFO_DATA_REF (stmt_info);
-       class loop *father = stmt_info->stmt->bb->loop_father;
-       if (!loop && father && !father->inner && father->superloops)
+       /* Segment loads and stores.  When the group size is > 1
+ the vectorizer will add a vector load/store statement for
+ each vector in the group.  Here we additionally add permute
+ costs for each.  */
+       /* TODO: Indexed and ordered/unordered cost.  */
+       int group_size = segment_loadstore_group_size (kind, stmt_info);
+       if (group_size > 1)
+ {
+   switch (group_size)
+     {
+     case 2:
+       if (riscv_v_ext_vector_mode_p (loop->vector_mode))
+ stmt_cost += costs->vla->segment_permute_2;
+       else
+ stmt_cost += costs->vls->segment_permute_2;
+       break;
+     case 3:
+       if (riscv_v_ext_vector_mode_p (loop->vector_mode))
+ stmt_cost += costs->vla->segment_permute_3;
+       else
+ stmt_cost += costs->vls->segment_permute_3;
+       break;
+     case 4:
+       if (riscv_v_ext_vector_mode_p (loop->vector_mode))
+ stmt_cost += costs->vla->segment_permute_4;
+       else
+ stmt_cost += costs->vls->segment_permute_4;
+       break;
+     case 5:
+       if (riscv_v_ext_vector_mode_p (loop->vector_mode))
+ stmt_cost += costs->vla->segment_permute_5;
+       else
+ stmt_cost += costs->vls->segment_permute_5;
+       break;
+     case 6:
+       if (riscv_v_ext_vector_mode_p (loop->vector_mode))
+ stmt_cost += costs->vla->segment_permute_6;
+       else
+ stmt_cost += costs->vls->segment_permute_6;
+       break;
+     case 7:
+       if (riscv_v_ext_vector_mode_p (loop->vector_mode))
+ stmt_cost += costs->vla->segment_permute_7;
+       else
+ stmt_cost += costs->vls->segment_permute_7;
+       break;
+     case 8:
+       if (riscv_v_ext_vector_mode_p (loop->vector_mode))
+ stmt_cost += costs->vla->segment_permute_8;
+       else
+ stmt_cost += costs->vls->segment_permute_8;
+       break;
+     default:
+       break;
+     }
+ }
+       else
{
-   tree ref;
-   if (TREE_CODE (dr->ref) != MEM_REF
-       || !(ref = TREE_OPERAND (dr->ref, 0))
-       || TREE_CODE (ref) != SSA_NAME)
-     break;
+   /* Unit-stride vector loads and stores do not have offset
+      addressing as opposed to scalar loads and stores.
+      If the address depends on a variable we need an additional
+      add/sub for each load/store in the worst case.  */
+   data_reference *dr = STMT_VINFO_DATA_REF (stmt_info);
+   class loop *father = stmt_info->stmt->bb->loop_father;
+   if (!loop && father && !father->inner && father->superloops)
+     {
+       tree ref;
+       if (TREE_CODE (dr->ref) != MEM_REF
+   || !(ref = TREE_OPERAND (dr->ref, 0))
+   || TREE_CODE (ref) != SSA_NAME)
+ break;
-   if (SSA_NAME_IS_DEFAULT_DEF (ref))
-     break;
+       if (SSA_NAME_IS_DEFAULT_DEF (ref))
+ break;
-   if (memrefs.contains ({ref, cst0}))
-     break;
+       if (memrefs.contains ({ref, cst0}))
+ break;
-   memrefs.add ({ref, cst0});
+       memrefs.add ({ref, cst0});
-   /* In case we have not seen REF before and the base address
-      is a pointer operation try a bit harder.  */
-   tree base = DR_BASE_ADDRESS (dr);
-   if (TREE_CODE (base) == POINTER_PLUS_EXPR
-       || TREE_CODE (base) == POINTER_DIFF_EXPR)
-     {
-       /* Deconstruct BASE's first operand.  If it is a binary
- operation, i.e. a base and an "offset" store this
- pair.  Only increase the stmt_cost if we haven't seen
- it before.  */
-       tree argp = TREE_OPERAND (base, 1);
-       typedef std::pair<tree, tree> addr_pair;
-       addr_pair pair;
-       if (TREE_CODE_CLASS (TREE_CODE (argp)) == tcc_binary)
+       /* In case we have not seen REF before and the base
+ address is a pointer operation try a bit harder.  */
+       tree base = DR_BASE_ADDRESS (dr);
+       if (TREE_CODE (base) == POINTER_PLUS_EXPR
+   || TREE_CODE (base) == POINTER_DIFF_EXPR)
{
-   tree argp0 = tree_strip_nop_conversions
-     (TREE_OPERAND (argp, 0));
-   tree argp1 = TREE_OPERAND (argp, 1);
-   pair = addr_pair (argp0, argp1);
-   if (memrefs.contains (pair))
-     break;
-
-   memrefs.add (pair);
-   stmt_cost += builtin_vectorization_cost (scalar_stmt,
-    NULL_TREE, 0);
+   /* Deconstruct BASE's first operand.  If it is a
+      binary operation, i.e. a base and an "offset"
+      store this pair.  Only increase the stmt_cost if
+      we haven't seen it before.  */
+   tree argp = TREE_OPERAND (base, 1);
+   typedef std::pair<tree, tree> addr_pair;
+   addr_pair pair;
+   if (TREE_CODE_CLASS (TREE_CODE (argp)) == tcc_binary)
+     {
+       tree argp0 = tree_strip_nop_conversions
+ (TREE_OPERAND (argp, 0));
+       tree argp1 = TREE_OPERAND (argp, 1);
+       pair = addr_pair (argp0, argp1);
+       if (memrefs.contains (pair))
+ break;
+
+       memrefs.add (pair);
+       stmt_cost
+ += builtin_vectorization_cost (scalar_stmt,
+        NULL_TREE, 0);
+     }
}
    }
}
diff --git a/gcc/config/riscv/riscv.cc b/gcc/config/riscv/riscv.cc
index 5e984ee2a55..874a42873d7 100644
--- a/gcc/config/riscv/riscv.cc
+++ b/gcc/config/riscv/riscv.cc
@@ -365,6 +365,13 @@ static const common_vector_cost rvv_vls_vector_cost = {
   1, /* fp_stmt_cost  */
   1, /* gather_load_cost  */
   1, /* scatter_store_cost  */
+  1, /* segment_permute (2) */
+  1, /* segment_permute (3) */
+  1, /* segment_permute (4) */
+  1, /* segment_permute (5) */
+  1, /* segment_permute (6) */
+  1, /* segment_permute (7) */
+  1, /* segment_permute (8) */
   1, /* vec_to_scalar_cost  */
   1, /* scalar_to_vec_cost  */
   1, /* permute_cost  */
@@ -381,6 +388,13 @@ static const scalable_vector_cost rvv_vla_vector_cost = {
     1, /* fp_stmt_cost  */
     1, /* gather_load_cost  */
     1, /* scatter_store_cost  */
+    1, /* segment_permute (2) */
+    1, /* segment_permute (3) */
+    1, /* segment_permute (4) */
+    1, /* segment_permute (5) */
+    1, /* segment_permute (6) */
+    1, /* segment_permute (7) */
+    1, /* segment_permute (8) */
     1, /* vec_to_scalar_cost  */
     1, /* scalar_to_vec_cost  */
     1, /* permute_cost  */

On 3/1/24 8:07 AM, Robin Dapp wrote:
>> +  /* Segment load/store permute cost.  */
>> +  const int segment_permute_2;
>> +  const int segment_permute_4;
>> +  const int segment_permute_8;
>>
>> Why do we only have 2/4/8, I think we should have 2/3/4/5/6/7/8
> 
> No idea why I posted that (wrong) version, I used it for
> some testing locally.  Attached is the proper version, still
> called it v3...
> 
> Regards
>   Robin
> 
> Subject: [PATCH v3] RISC-V: Add initial cost handling for segment
>   loads/stores.
> 
> This patch makes segment loads and stores more expensive.  It adds
> segment_permute_2 as well as 3 to 8 cost fields to the common vector
> costs and adds handling to adjust_stmt_cost.
> 
> gcc/ChangeLog:
> 
> 	* config/riscv/riscv-protos.h (struct common_vector_cost): Add
> 	segment_permute cost.
> 	* config/riscv/riscv-vector-costs.cc (costs::adjust_stmt_cost):
> 	Handle segment loads/stores.
> 	* config/riscv/riscv.cc: Initialize segment_permute_[2-8] to 1.
So where do we stand with this?  Juzhe asked it to be rebased, but I 
don't see a rebased version in my inbox and I don't see anything that 
looks like this on the trunk.

jeff

> So where do we stand with this?  Juzhe asked it to be rebased, but I
> don't see a rebased version in my inbox and I don't see anything that
> looks like this on the trunk.

I missed this one and figured as we're pretty late in the cycle it can
wait until GCC 15.  Therefore let's call it "deferred".

Regards
 Robin

I think it's harmless to let this patch in GCC-14.
So LGTM from my side to land this path in GCC-14..



juzhe.zhong@rivai.ai
 
From: Robin Dapp
Date: 2024-03-26 01:07
To: Jeff Law; 钟居哲; gcc-patches; palmer; kito.cheng
CC: rdapp.gcc
Subject: Re: [PATCH] RISC-V: Add initial cost handling for segment loads/stores.
> So where do we stand with this?  Juzhe asked it to be rebased, but I
> don't see a rebased version in my inbox and I don't see anything that
> looks like this on the trunk.
 
I missed this one and figured as we're pretty late in the cycle it can
wait until GCC 15.  Therefore let's call it "deferred".
 
Regards
Robin