diff --git c/libcody/Makefile.in w/libcody/Makefile.in
index 6e38d51516f..b8b45a2e310 100644
--- c/libcody/Makefile.in
+++ w/libcody/Makefile.in
@@ -2,48 +2,15 @@
 # Copyright (C) 2019-2020 Nathan Sidwell, nathan@acm.org
 # License: Apache v2.0
 
-ifeq (0,$(MAKELEVEL))
-ifneq (,@tools@)
-$(info Prepending @tools@/bin to PATH)
-PATH := @tools@/bin:$(PATH)
-export PATH
-endif
-ifeq (,$(SERIAL))
-# Figure out if we should set parallelism
-ifeq (,$(filter clean%,$(MAKECMDGOALS)))
-PARALLELISM := @NUM_CPUS@
-endif
-endif
-endif
-
-ifeq (00,$(MAKELEVEL)$(if $(PARALLELISM),0,1))
-# Although Make 4.3 documentation suggests I can set parallelism just
-# by appending to MAKEFLAGS, it doesn't seem to work.  It's also not
-# possible to figure out the current Make invocation's parallelism,
-# the -j option doesn't appear in MAKEFLAGS and is magically inserted
-# when that is expanded in a rule.  I can't figure how to get a rule
-# expansion into a variable to test.  Fortunately, Make propagates an
-# incoming -j option rather than the one you attempted to append
-$(info Parallelizing $(PARALLELISM) ways)
-MAKEFLAGS += -j$(PARALLELISM)
-ifneq (,$(MAKECMDGOALS))
-$(MAKECMDGOALS): recurse
-endif
-recurse:
-	$(MAKE) -r$(MAKEFLAGS) $(MAKECMDGOALS)
-.PHONY: recurse
-else
-
 srcdir := @srcdir@
 prefix := @prefix@
 exec_prefix := @exec_prefix@
 bindir := @bindir@
 libdir := @libdir@
 includedir := @includedir@
-SUBDIRS := @SUBDIRS@
-# autoconf doesn't seem to like setting SHELL
-SHELL := $(shell which zsh 2>/dev/null >/dev/null && echo zsh \
-  || (echo "No ZSH, maybe flakey" >&2 && echo sh))
+# Linker options
+LDFLAGS := @LDFLAGS@
+LIBS := @LIBS@
 
 # We have to place the -I paths last, so that building will see -I paths to us
 CXX := $(filter-out -I%,@CXX@)
@@ -55,46 +22,10 @@ INSTALL := $(srcdir)/build-aux/install-sh
 CXXFLAGS := @CXXFLAGS@
 CXXINC := $(filter -I%,@CXX@)
 CXXOPTS := $(CXXFLAGS) @PICFLAG@
-ifeq ($(notdir $(firstword $(CXX))),g++)
-# It's GCC, or pretending to be it -- so it better smell like it!
-# Code generation
-CXXOPTS += -fno-enforce-eh-specs
-CXXOPTS += -fno-stack-protector -fno-threadsafe-statics
-ifneq (@EXCEPTIONS@,yes)
-CXXOPTS += -fno-exceptions -fno-rtti
-endif
-ifeq ($(filter -fdebug-prefix-map=%,$(CXXOPTS)),)
-CXXOPTS += -fdebug-prefix-map=${srcdir}/=
-endif
-# Warning options
-CXXOPTS += -W -Wall
-ifeq (no,)
-# just turn off for now
-CXXOPTS += -Woverloaded-virtual -Wshadow
-CXXOPTS += -Wno-invalid-offsetof -Wno-unused-variable
-CXXOPTS += -Wno-missing-field-initializers
-# Diagnostic options, look at controlling terminal so that piping
-# through more works
-MLEN := $(shell stty size </dev/tty 2>/dev/null | cut -d' ' -f2)
-ifneq (,$(MLEN))
-CXXOPTS += -fmessage-length=$(MLEN)
-endif
-CXXOPTS += -fdiagnostics-color=always -fno-diagnostics-show-option
-endif
-else
-ifeq ($(notdir $(firstword $(CXX))),clang++)
-CXXOPTS += -fno-stack-protector -fno-threadsafe-statics
+
 ifneq (@EXCEPTIONS@,yes)
 CXXOPTS += -fno-exceptions -fno-rtti
 endif
-# Warning options
-CXXOPTS += -W -Wall -Woverloaded-virtual -Wshadow
-CXXOPTS += -Wno-invalid-offsetof -Wno-unused-variable
-CXXOPTS += -Wno-missing-field-initializers
-else
-# Add different compiler's options here
-endif
-endif
 
 # Config
 CXXOPTS += $(filter-out -DHAVE_CONFIG_H,@DEFS@) -include config.h
@@ -127,13 +58,12 @@ vpath %.cc $(srcdir)
 	$(CXX) $(strip $(CXXOPTS) $(call SRC_CXXFLAGS,$<) $(CXXINC)) \
 	  -MMD -MP -MF ${@:.o=.d} -c -o $@ $<
 
-all:: Makefile $(addprefix all.,$(SUBDIRS))
-
-check:: Makefile $(addprefix check.,$(SUBDIRS))
+all:: Makefile
 
-clean:: Makefile $(addprefix clean.,$(SUBDIRS))
+clean:: Makefile
 
-revision.stamp: $(addprefix $(srcdir)/,. $(SUBDIRS))
+# FIXME: Delete
+revision.stamp: $(srcdir)/.
 	@revision=$$(git -C $(srcdir) rev-parse HEAD 2>/dev/null) ;\
 	if test -n "$$revision" ;\
 	then revision=git-$$revision ;\
@@ -152,14 +82,11 @@ clean::
 
 distclean:: clean
 	rm -f config.log config.status
-	rm -rf $(SUBDIRS)
 
-$(srcdir)/configure: $(srcdir)/configure.ac \
-	  $(patsubst %,$(srcdir)/%/config.m4,. $(SUBDIRS))
+$(srcdir)/configure: $(srcdir)/configure.ac $(srcdir)/config.m4
 	$(call MAINTAINER,$@,cd $(@D) && autoconf -W all,error)
 
-$(srcdir)/config.h.in: $(srcdir)/configure.ac \
-	  $(patsubst %,$(srcdir)/%/config.m4,. $(SUBDIRS))
+$(srcdir)/config.h.in: $(srcdir)/configure.ac $(srcdir)/config.m4
 	$(call MAINTAINER,$@,cd $(@D) && autoheader -f -W all,error)
 
 config.h: config.status config.h.in
@@ -167,7 +94,7 @@ config.h: config.status config.h.in
 	touch $@
 
 ifeq ($(filter %clean,$(MAKECMDGOALS)),)
-@CONFIG_FILES@: %: config.status %.in
+Makefile: config.status Makefile.in
 	./$< --file=$@
 	touch $@
 endif
@@ -186,7 +113,29 @@ clean::
 
 .PHONY: all check clean distclean maintainer-clean
 
--include $(addsuffix /Makesub,. $(SUBDIRS))
--include $(addsuffix /tests/Makesub,. $(SUBDIRS))
+CXXFLAGS/ := -I$(srcdir)
+LIBCODY.O := buffer.o client.o fatal.o netclient.o netserver.o \
+	resolver.o packet.o server.o
+
+all:: libcody.a
+
+libcody.a: $(LIBCODY.O)
+	$(AR) -cr $@ $^
+	$(RANLIB) $@
+
+clean::
+	rm -f $(LIBCODY.O) $(LIBCODY.O:.o=.d)
+	rm -f libcody.a
+
+CXXFLAGS/fatal.cc = -DSRCDIR='"$(srcdir)"'
+
+fatal.o: Makefile revision
+
+install::
+	$(INSTALL) -d $(libdir) $(includedir)
+	$(INSTALL) libcody.a $(libdir)
+	$(INSTALL) $(srcdir)/cody.hh $(includedir)
 
+ifeq ($(filter clean%,$(MAKECMDGOALS)),)
+-include $(LIBCODY.O:.o=.d)
 endif
diff --git c/libcody/Makesub.in w/libcody/Makesub.in
deleted file mode 100644
index 6ae49d6c793..00000000000
--- c/libcody/Makesub.in
+++ /dev/null
@@ -1,49 +0,0 @@
-# CODYlib		-*- mode:Makefile -*-
-# Copyright (C) 2019-2020 Nathan Sidwell, nathan@acm.org
-# License: Apache v2.0
-
-DOXYGEN := @DOXYGEN@
-CXXFLAGS/ := -I$(srcdir)
-LIBCODY.O := buffer.o client.o fatal.o netclient.o netserver.o \
-	resolver.o packet.o server.o
-
-all:: .gdbinit
-
-.gdbinit: gdbinit
-	rm -f $@ ; ln -s $< $@
-
-clean::
-	rm -f gdbinit .gdbinit
-
-all:: libcody.a
-
-libcody.a: $(LIBCODY.O)
-	$(AR) -cr $@ $^
-	$(RANLIB) $@
-
-clean::
-	rm -f $(LIBCODY.O) $(LIBCODY.O:.o=.d)
-	rm -f libcody.a
-
-CXXFLAGS/fatal.cc = -DREVISION='"$(shell cat revision)"' -DSRCDIR='"$(srcdir)"'
-
-fatal.o: Makefile revision
-
-doc:: dox.cfg
-ifneq ($(DOXYGEN),:)
-	cd $(<D); $(DOXYGEN) $(<F) >&dox.log
-else
-	@echo "doxygen not present, documentation not built"
-endif
-
-clean::
-	rm -rf dox dox.log
-
-install::
-	$(INSTALL) -d $(libdir) $(includedir)
-	$(INSTALL) libcody.a $(libdir)
-	$(INSTALL) $(srcdir)/cody.hh $(includedir)
-
-ifeq ($(filter clean%,$(MAKECMDGOALS)),)
--include $(LIBCODY.O:.o=.d)
-endif
diff --git c/libcody/build-aux/config.guess w/libcody/build-aux/config.guess
deleted file mode 100755
index 256083a70d3..00000000000
--- c/libcody/build-aux/config.guess
+++ /dev/null
@@ -1,1476 +0,0 @@
-#! /bin/sh
-# Attempt to guess a canonical system name.
-#   Copyright 1992-2018 Free Software Foundation, Inc.
-
-timestamp='2018-03-08'
-
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, see <https://www.gnu.org/licenses/>.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that
-# program.  This Exception is an additional permission under section 7
-# of the GNU General Public License, version 3 ("GPLv3").
-#
-# Originally written by Per Bothner; maintained since 2000 by Ben Elliston.
-#
-# You can get the latest version of this script from:
-# https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess
-#
-# Please send patches to <config-patches@gnu.org>.
-
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION]
-
-Output the configuration name of the system \`$me' is run on.
-
-Options:
-  -h, --help         print this help, then exit
-  -t, --time-stamp   print date of last modification, then exit
-  -v, --version      print version number, then exit
-
-Report bugs and patches to <config-patches@gnu.org>."
-
-version="\
-GNU config.guess ($timestamp)
-
-Originally written by Per Bothner.
-Copyright 1992-2018 Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions.  There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
-  case $1 in
-    --time-stamp | --time* | -t )
-       echo "$timestamp" ; exit ;;
-    --version | -v )
-       echo "$version" ; exit ;;
-    --help | --h* | -h )
-       echo "$usage"; exit ;;
-    -- )     # Stop option processing
-       shift; break ;;
-    - )	# Use stdin as input.
-       break ;;
-    -* )
-       echo "$me: invalid option $1$help" >&2
-       exit 1 ;;
-    * )
-       break ;;
-  esac
-done
-
-if test $# != 0; then
-  echo "$me: too many arguments$help" >&2
-  exit 1
-fi
-
-trap 'exit 1' 1 2 15
-
-# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
-# compiler to aid in system detection is discouraged as it requires
-# temporary files to be created and, as you can see below, it is a
-# headache to deal with in a portable fashion.
-
-# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
-# use `HOST_CC' if defined, but it is deprecated.
-
-# Portable tmp directory creation inspired by the Autoconf team.
-
-set_cc_for_build='
-trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
-trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
-: ${TMPDIR=/tmp} ;
- { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
- { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
- { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
- { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
-dummy=$tmp/dummy ;
-tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
-case $CC_FOR_BUILD,$HOST_CC,$CC in
- ,,)    echo "int x;" > "$dummy.c" ;
-	for c in cc gcc c89 c99 ; do
-	  if ($c -c -o "$dummy.o" "$dummy.c") >/dev/null 2>&1 ; then
-	     CC_FOR_BUILD="$c"; break ;
-	  fi ;
-	done ;
-	if test x"$CC_FOR_BUILD" = x ; then
-	  CC_FOR_BUILD=no_compiler_found ;
-	fi
-	;;
- ,,*)   CC_FOR_BUILD=$CC ;;
- ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
-esac ; set_cc_for_build= ;'
-
-# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
-# (ghazi@noc.rutgers.edu 1994-08-24)
-if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
-	PATH=$PATH:/.attbin ; export PATH
-fi
-
-UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
-UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
-UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
-UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
-
-case "$UNAME_SYSTEM" in
-Linux|GNU|GNU/*)
-	# If the system lacks a compiler, then just pick glibc.
-	# We could probably try harder.
-	LIBC=gnu
-
-	eval "$set_cc_for_build"
-	cat <<-EOF > "$dummy.c"
-	#include <features.h>
-	#if defined(__UCLIBC__)
-	LIBC=uclibc
-	#elif defined(__dietlibc__)
-	LIBC=dietlibc
-	#else
-	LIBC=gnu
-	#endif
-	EOF
-	eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`"
-
-	# If ldd exists, use it to detect musl libc.
-	if command -v ldd >/dev/null && \
-		ldd --version 2>&1 | grep -q ^musl
-	then
-	    LIBC=musl
-	fi
-	;;
-esac
-
-# Note: order is significant - the case branches are not exclusive.
-
-case "$UNAME_MACHINE:$UNAME_SYSTEM:$UNAME_RELEASE:$UNAME_VERSION" in
-    *:NetBSD:*:*)
-	# NetBSD (nbsd) targets should (where applicable) match one or
-	# more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*,
-	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
-	# switched to ELF, *-*-netbsd* would select the old
-	# object file format.  This provides both forward
-	# compatibility and a consistent mechanism for selecting the
-	# object file format.
-	#
-	# Note: NetBSD doesn't particularly care about the vendor
-	# portion of the name.  We always set it to "unknown".
-	sysctl="sysctl -n hw.machine_arch"
-	UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \
-	    "/sbin/$sysctl" 2>/dev/null || \
-	    "/usr/sbin/$sysctl" 2>/dev/null || \
-	    echo unknown)`
-	case "$UNAME_MACHINE_ARCH" in
-	    armeb) machine=armeb-unknown ;;
-	    arm*) machine=arm-unknown ;;
-	    sh3el) machine=shl-unknown ;;
-	    sh3eb) machine=sh-unknown ;;
-	    sh5el) machine=sh5le-unknown ;;
-	    earmv*)
-		arch=`echo "$UNAME_MACHINE_ARCH" | sed -e 's,^e\(armv[0-9]\).*$,\1,'`
-		endian=`echo "$UNAME_MACHINE_ARCH" | sed -ne 's,^.*\(eb\)$,\1,p'`
-		machine="${arch}${endian}"-unknown
-		;;
-	    *) machine="$UNAME_MACHINE_ARCH"-unknown ;;
-	esac
-	# The Operating System including object format, if it has switched
-	# to ELF recently (or will in the future) and ABI.
-	case "$UNAME_MACHINE_ARCH" in
-	    earm*)
-		os=netbsdelf
-		;;
-	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
-		eval "$set_cc_for_build"
-		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
-			| grep -q __ELF__
-		then
-		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
-		    # Return netbsd for either.  FIX?
-		    os=netbsd
-		else
-		    os=netbsdelf
-		fi
-		;;
-	    *)
-		os=netbsd
-		;;
-	esac
-	# Determine ABI tags.
-	case "$UNAME_MACHINE_ARCH" in
-	    earm*)
-		expr='s/^earmv[0-9]/-eabi/;s/eb$//'
-		abi=`echo "$UNAME_MACHINE_ARCH" | sed -e "$expr"`
-		;;
-	esac
-	# The OS release
-	# Debian GNU/NetBSD machines have a different userland, and
-	# thus, need a distinct triplet. However, they do not need
-	# kernel version information, so it can be replaced with a
-	# suitable tag, in the style of linux-gnu.
-	case "$UNAME_VERSION" in
-	    Debian*)
-		release='-gnu'
-		;;
-	    *)
-		release=`echo "$UNAME_RELEASE" | sed -e 's/[-_].*//' | cut -d. -f1,2`
-		;;
-	esac
-	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
-	# contains redundant information, the shorter form:
-	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
-	echo "$machine-${os}${release}${abi}"
-	exit ;;
-    *:Bitrig:*:*)
-	UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
-	echo "$UNAME_MACHINE_ARCH"-unknown-bitrig"$UNAME_RELEASE"
-	exit ;;
-    *:OpenBSD:*:*)
-	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
-	echo "$UNAME_MACHINE_ARCH"-unknown-openbsd"$UNAME_RELEASE"
-	exit ;;
-    *:LibertyBSD:*:*)
-	UNAME_MACHINE_ARCH=`arch | sed 's/^.*BSD\.//'`
-	echo "$UNAME_MACHINE_ARCH"-unknown-libertybsd"$UNAME_RELEASE"
-	exit ;;
-    *:MidnightBSD:*:*)
-	echo "$UNAME_MACHINE"-unknown-midnightbsd"$UNAME_RELEASE"
-	exit ;;
-    *:ekkoBSD:*:*)
-	echo "$UNAME_MACHINE"-unknown-ekkobsd"$UNAME_RELEASE"
-	exit ;;
-    *:SolidBSD:*:*)
-	echo "$UNAME_MACHINE"-unknown-solidbsd"$UNAME_RELEASE"
-	exit ;;
-    macppc:MirBSD:*:*)
-	echo powerpc-unknown-mirbsd"$UNAME_RELEASE"
-	exit ;;
-    *:MirBSD:*:*)
-	echo "$UNAME_MACHINE"-unknown-mirbsd"$UNAME_RELEASE"
-	exit ;;
-    *:Sortix:*:*)
-	echo "$UNAME_MACHINE"-unknown-sortix
-	exit ;;
-    *:Redox:*:*)
-	echo "$UNAME_MACHINE"-unknown-redox
-	exit ;;
-    mips:OSF1:*.*)
-        echo mips-dec-osf1
-        exit ;;
-    alpha:OSF1:*:*)
-	case $UNAME_RELEASE in
-	*4.0)
-		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
-		;;
-	*5.*)
-		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
-		;;
-	esac
-	# According to Compaq, /usr/sbin/psrinfo has been available on
-	# OSF/1 and Tru64 systems produced since 1995.  I hope that
-	# covers most systems running today.  This code pipes the CPU
-	# types through head -n 1, so we only detect the type of CPU 0.
-	ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
-	case "$ALPHA_CPU_TYPE" in
-	    "EV4 (21064)")
-		UNAME_MACHINE=alpha ;;
-	    "EV4.5 (21064)")
-		UNAME_MACHINE=alpha ;;
-	    "LCA4 (21066/21068)")
-		UNAME_MACHINE=alpha ;;
-	    "EV5 (21164)")
-		UNAME_MACHINE=alphaev5 ;;
-	    "EV5.6 (21164A)")
-		UNAME_MACHINE=alphaev56 ;;
-	    "EV5.6 (21164PC)")
-		UNAME_MACHINE=alphapca56 ;;
-	    "EV5.7 (21164PC)")
-		UNAME_MACHINE=alphapca57 ;;
-	    "EV6 (21264)")
-		UNAME_MACHINE=alphaev6 ;;
-	    "EV6.7 (21264A)")
-		UNAME_MACHINE=alphaev67 ;;
-	    "EV6.8CB (21264C)")
-		UNAME_MACHINE=alphaev68 ;;
-	    "EV6.8AL (21264B)")
-		UNAME_MACHINE=alphaev68 ;;
-	    "EV6.8CX (21264D)")
-		UNAME_MACHINE=alphaev68 ;;
-	    "EV6.9A (21264/EV69A)")
-		UNAME_MACHINE=alphaev69 ;;
-	    "EV7 (21364)")
-		UNAME_MACHINE=alphaev7 ;;
-	    "EV7.9 (21364A)")
-		UNAME_MACHINE=alphaev79 ;;
-	esac
-	# A Pn.n version is a patched version.
-	# A Vn.n version is a released version.
-	# A Tn.n version is a released field test version.
-	# A Xn.n version is an unreleased experimental baselevel.
-	# 1.2 uses "1.2" for uname -r.
-	echo "$UNAME_MACHINE"-dec-osf"`echo "$UNAME_RELEASE" | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`"
-	# Reset EXIT trap before exiting to avoid spurious non-zero exit code.
-	exitcode=$?
-	trap '' 0
-	exit $exitcode ;;
-    Amiga*:UNIX_System_V:4.0:*)
-	echo m68k-unknown-sysv4
-	exit ;;
-    *:[Aa]miga[Oo][Ss]:*:*)
-	echo "$UNAME_MACHINE"-unknown-amigaos
-	exit ;;
-    *:[Mm]orph[Oo][Ss]:*:*)
-	echo "$UNAME_MACHINE"-unknown-morphos
-	exit ;;
-    *:OS/390:*:*)
-	echo i370-ibm-openedition
-	exit ;;
-    *:z/VM:*:*)
-	echo s390-ibm-zvmoe
-	exit ;;
-    *:OS400:*:*)
-	echo powerpc-ibm-os400
-	exit ;;
-    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
-	echo arm-acorn-riscix"$UNAME_RELEASE"
-	exit ;;
-    arm*:riscos:*:*|arm*:RISCOS:*:*)
-	echo arm-unknown-riscos
-	exit ;;
-    SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
-	echo hppa1.1-hitachi-hiuxmpp
-	exit ;;
-    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
-	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
-	if test "`(/bin/universe) 2>/dev/null`" = att ; then
-		echo pyramid-pyramid-sysv3
-	else
-		echo pyramid-pyramid-bsd
-	fi
-	exit ;;
-    NILE*:*:*:dcosx)
-	echo pyramid-pyramid-svr4
-	exit ;;
-    DRS?6000:unix:4.0:6*)
-	echo sparc-icl-nx6
-	exit ;;
-    DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
-	case `/usr/bin/uname -p` in
-	    sparc) echo sparc-icl-nx7; exit ;;
-	esac ;;
-    s390x:SunOS:*:*)
-	echo "$UNAME_MACHINE"-ibm-solaris2"`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`"
-	exit ;;
-    sun4H:SunOS:5.*:*)
-	echo sparc-hal-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`"
-	exit ;;
-    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
-	echo sparc-sun-solaris2"`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`"
-	exit ;;
-    i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
-	echo i386-pc-auroraux"$UNAME_RELEASE"
-	exit ;;
-    i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
-	eval "$set_cc_for_build"
-	SUN_ARCH=i386
-	# If there is a compiler, see if it is configured for 64-bit objects.
-	# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
-	# This test works for both compilers.
-	if [ "$CC_FOR_BUILD" != no_compiler_found ]; then
-	    if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
-		(CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
-		grep IS_64BIT_ARCH >/dev/null
-	    then
-		SUN_ARCH=x86_64
-	    fi
-	fi
-	echo "$SUN_ARCH"-pc-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`"
-	exit ;;
-    sun4*:SunOS:6*:*)
-	# According to config.sub, this is the proper way to canonicalize
-	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
-	# it's likely to be more like Solaris than SunOS4.
-	echo sparc-sun-solaris3"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`"
-	exit ;;
-    sun4*:SunOS:*:*)
-	case "`/usr/bin/arch -k`" in
-	    Series*|S4*)
-		UNAME_RELEASE=`uname -v`
-		;;
-	esac
-	# Japanese Language versions have a version number like `4.1.3-JL'.
-	echo sparc-sun-sunos"`echo "$UNAME_RELEASE"|sed -e 's/-/_/'`"
-	exit ;;
-    sun3*:SunOS:*:*)
-	echo m68k-sun-sunos"$UNAME_RELEASE"
-	exit ;;
-    sun*:*:4.2BSD:*)
-	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
-	test "x$UNAME_RELEASE" = x && UNAME_RELEASE=3
-	case "`/bin/arch`" in
-	    sun3)
-		echo m68k-sun-sunos"$UNAME_RELEASE"
-		;;
-	    sun4)
-		echo sparc-sun-sunos"$UNAME_RELEASE"
-		;;
-	esac
-	exit ;;
-    aushp:SunOS:*:*)
-	echo sparc-auspex-sunos"$UNAME_RELEASE"
-	exit ;;
-    # The situation for MiNT is a little confusing.  The machine name
-    # can be virtually everything (everything which is not
-    # "atarist" or "atariste" at least should have a processor
-    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
-    # to the lowercase version "mint" (or "freemint").  Finally
-    # the system name "TOS" denotes a system which is actually not
-    # MiNT.  But MiNT is downward compatible to TOS, so this should
-    # be no problem.
-    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
-	echo m68k-atari-mint"$UNAME_RELEASE"
-	exit ;;
-    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
-	echo m68k-atari-mint"$UNAME_RELEASE"
-	exit ;;
-    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
-	echo m68k-atari-mint"$UNAME_RELEASE"
-	exit ;;
-    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
-	echo m68k-milan-mint"$UNAME_RELEASE"
-	exit ;;
-    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
-	echo m68k-hades-mint"$UNAME_RELEASE"
-	exit ;;
-    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
-	echo m68k-unknown-mint"$UNAME_RELEASE"
-	exit ;;
-    m68k:machten:*:*)
-	echo m68k-apple-machten"$UNAME_RELEASE"
-	exit ;;
-    powerpc:machten:*:*)
-	echo powerpc-apple-machten"$UNAME_RELEASE"
-	exit ;;
-    RISC*:Mach:*:*)
-	echo mips-dec-mach_bsd4.3
-	exit ;;
-    RISC*:ULTRIX:*:*)
-	echo mips-dec-ultrix"$UNAME_RELEASE"
-	exit ;;
-    VAX*:ULTRIX*:*:*)
-	echo vax-dec-ultrix"$UNAME_RELEASE"
-	exit ;;
-    2020:CLIX:*:* | 2430:CLIX:*:*)
-	echo clipper-intergraph-clix"$UNAME_RELEASE"
-	exit ;;
-    mips:*:*:UMIPS | mips:*:*:RISCos)
-	eval "$set_cc_for_build"
-	sed 's/^	//' << EOF > "$dummy.c"
-#ifdef __cplusplus
-#include <stdio.h>  /* for printf() prototype */
-	int main (int argc, char *argv[]) {
-#else
-	int main (argc, argv) int argc; char *argv[]; {
-#endif
-	#if defined (host_mips) && defined (MIPSEB)
-	#if defined (SYSTYPE_SYSV)
-	  printf ("mips-mips-riscos%ssysv\\n", argv[1]); exit (0);
-	#endif
-	#if defined (SYSTYPE_SVR4)
-	  printf ("mips-mips-riscos%ssvr4\\n", argv[1]); exit (0);
-	#endif
-	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
-	  printf ("mips-mips-riscos%sbsd\\n", argv[1]); exit (0);
-	#endif
-	#endif
-	  exit (-1);
-	}
-EOF
-	$CC_FOR_BUILD -o "$dummy" "$dummy.c" &&
-	  dummyarg=`echo "$UNAME_RELEASE" | sed -n 's/\([0-9]*\).*/\1/p'` &&
-	  SYSTEM_NAME=`"$dummy" "$dummyarg"` &&
-	    { echo "$SYSTEM_NAME"; exit; }
-	echo mips-mips-riscos"$UNAME_RELEASE"
-	exit ;;
-    Motorola:PowerMAX_OS:*:*)
-	echo powerpc-motorola-powermax
-	exit ;;
-    Motorola:*:4.3:PL8-*)
-	echo powerpc-harris-powermax
-	exit ;;
-    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
-	echo powerpc-harris-powermax
-	exit ;;
-    Night_Hawk:Power_UNIX:*:*)
-	echo powerpc-harris-powerunix
-	exit ;;
-    m88k:CX/UX:7*:*)
-	echo m88k-harris-cxux7
-	exit ;;
-    m88k:*:4*:R4*)
-	echo m88k-motorola-sysv4
-	exit ;;
-    m88k:*:3*:R3*)
-	echo m88k-motorola-sysv3
-	exit ;;
-    AViiON:dgux:*:*)
-	# DG/UX returns AViiON for all architectures
-	UNAME_PROCESSOR=`/usr/bin/uname -p`
-	if [ "$UNAME_PROCESSOR" = mc88100 ] || [ "$UNAME_PROCESSOR" = mc88110 ]
-	then
-	    if [ "$TARGET_BINARY_INTERFACE"x = m88kdguxelfx ] || \
-	       [ "$TARGET_BINARY_INTERFACE"x = x ]
-	    then
-		echo m88k-dg-dgux"$UNAME_RELEASE"
-	    else
-		echo m88k-dg-dguxbcs"$UNAME_RELEASE"
-	    fi
-	else
-	    echo i586-dg-dgux"$UNAME_RELEASE"
-	fi
-	exit ;;
-    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
-	echo m88k-dolphin-sysv3
-	exit ;;
-    M88*:*:R3*:*)
-	# Delta 88k system running SVR3
-	echo m88k-motorola-sysv3
-	exit ;;
-    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
-	echo m88k-tektronix-sysv3
-	exit ;;
-    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
-	echo m68k-tektronix-bsd
-	exit ;;
-    *:IRIX*:*:*)
-	echo mips-sgi-irix"`echo "$UNAME_RELEASE"|sed -e 's/-/_/g'`"
-	exit ;;
-    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
-	echo romp-ibm-aix     # uname -m gives an 8 hex-code CPU id
-	exit ;;               # Note that: echo "'`uname -s`'" gives 'AIX '
-    i*86:AIX:*:*)
-	echo i386-ibm-aix
-	exit ;;
-    ia64:AIX:*:*)
-	if [ -x /usr/bin/oslevel ] ; then
-		IBM_REV=`/usr/bin/oslevel`
-	else
-		IBM_REV="$UNAME_VERSION.$UNAME_RELEASE"
-	fi
-	echo "$UNAME_MACHINE"-ibm-aix"$IBM_REV"
-	exit ;;
-    *:AIX:2:3)
-	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
-		eval "$set_cc_for_build"
-		sed 's/^		//' << EOF > "$dummy.c"
-		#include <sys/systemcfg.h>
-
-		main()
-			{
-			if (!__power_pc())
-				exit(1);
-			puts("powerpc-ibm-aix3.2.5");
-			exit(0);
-			}
-EOF
-		if $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"`
-		then
-			echo "$SYSTEM_NAME"
-		else
-			echo rs6000-ibm-aix3.2.5
-		fi
-	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
-		echo rs6000-ibm-aix3.2.4
-	else
-		echo rs6000-ibm-aix3.2
-	fi
-	exit ;;
-    *:AIX:*:[4567])
-	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
-	if /usr/sbin/lsattr -El "$IBM_CPU_ID" | grep ' POWER' >/dev/null 2>&1; then
-		IBM_ARCH=rs6000
-	else
-		IBM_ARCH=powerpc
-	fi
-	if [ -x /usr/bin/lslpp ] ; then
-		IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc |
-			   awk -F: '{ print $3 }' | sed s/[0-9]*$/0/`
-	else
-		IBM_REV="$UNAME_VERSION.$UNAME_RELEASE"
-	fi
-	echo "$IBM_ARCH"-ibm-aix"$IBM_REV"
-	exit ;;
-    *:AIX:*:*)
-	echo rs6000-ibm-aix
-	exit ;;
-    ibmrt:4.4BSD:*|romp-ibm:4.4BSD:*)
-	echo romp-ibm-bsd4.4
-	exit ;;
-    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
-	echo romp-ibm-bsd"$UNAME_RELEASE"   # 4.3 with uname added to
-	exit ;;                             # report: romp-ibm BSD 4.3
-    *:BOSX:*:*)
-	echo rs6000-bull-bosx
-	exit ;;
-    DPX/2?00:B.O.S.:*:*)
-	echo m68k-bull-sysv3
-	exit ;;
-    9000/[34]??:4.3bsd:1.*:*)
-	echo m68k-hp-bsd
-	exit ;;
-    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
-	echo m68k-hp-bsd4.4
-	exit ;;
-    9000/[34678]??:HP-UX:*:*)
-	HPUX_REV=`echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//'`
-	case "$UNAME_MACHINE" in
-	    9000/31?)            HP_ARCH=m68000 ;;
-	    9000/[34]??)         HP_ARCH=m68k ;;
-	    9000/[678][0-9][0-9])
-		if [ -x /usr/bin/getconf ]; then
-		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
-		    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
-		    case "$sc_cpu_version" in
-		      523) HP_ARCH=hppa1.0 ;; # CPU_PA_RISC1_0
-		      528) HP_ARCH=hppa1.1 ;; # CPU_PA_RISC1_1
-		      532)                      # CPU_PA_RISC2_0
-			case "$sc_kernel_bits" in
-			  32) HP_ARCH=hppa2.0n ;;
-			  64) HP_ARCH=hppa2.0w ;;
-			  '') HP_ARCH=hppa2.0 ;;   # HP-UX 10.20
-			esac ;;
-		    esac
-		fi
-		if [ "$HP_ARCH" = "" ]; then
-		    eval "$set_cc_for_build"
-		    sed 's/^		//' << EOF > "$dummy.c"
-
-		#define _HPUX_SOURCE
-		#include <stdlib.h>
-		#include <unistd.h>
-
-		int main ()
-		{
-		#if defined(_SC_KERNEL_BITS)
-		    long bits = sysconf(_SC_KERNEL_BITS);
-		#endif
-		    long cpu  = sysconf (_SC_CPU_VERSION);
-
-		    switch (cpu)
-			{
-			case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
-			case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
-			case CPU_PA_RISC2_0:
-		#if defined(_SC_KERNEL_BITS)
-			    switch (bits)
-				{
-				case 64: puts ("hppa2.0w"); break;
-				case 32: puts ("hppa2.0n"); break;
-				default: puts ("hppa2.0"); break;
-				} break;
-		#else  /* !defined(_SC_KERNEL_BITS) */
-			    puts ("hppa2.0"); break;
-		#endif
-			default: puts ("hppa1.0"); break;
-			}
-		    exit (0);
-		}
-EOF
-		    (CCOPTS="" $CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null) && HP_ARCH=`"$dummy"`
-		    test -z "$HP_ARCH" && HP_ARCH=hppa
-		fi ;;
-	esac
-	if [ "$HP_ARCH" = hppa2.0w ]
-	then
-	    eval "$set_cc_for_build"
-
-	    # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
-	    # 32-bit code.  hppa64-hp-hpux* has the same kernel and a compiler
-	    # generating 64-bit code.  GNU and HP use different nomenclature:
-	    #
-	    # $ CC_FOR_BUILD=cc ./config.guess
-	    # => hppa2.0w-hp-hpux11.23
-	    # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
-	    # => hppa64-hp-hpux11.23
-
-	    if echo __LP64__ | (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) |
-		grep -q __LP64__
-	    then
-		HP_ARCH=hppa2.0w
-	    else
-		HP_ARCH=hppa64
-	    fi
-	fi
-	echo "$HP_ARCH"-hp-hpux"$HPUX_REV"
-	exit ;;
-    ia64:HP-UX:*:*)
-	HPUX_REV=`echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//'`
-	echo ia64-hp-hpux"$HPUX_REV"
-	exit ;;
-    3050*:HI-UX:*:*)
-	eval "$set_cc_for_build"
-	sed 's/^	//' << EOF > "$dummy.c"
-	#include <unistd.h>
-	int
-	main ()
-	{
-	  long cpu = sysconf (_SC_CPU_VERSION);
-	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
-	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
-	     results, however.  */
-	  if (CPU_IS_PA_RISC (cpu))
-	    {
-	      switch (cpu)
-		{
-		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
-		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
-		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
-		  default: puts ("hppa-hitachi-hiuxwe2"); break;
-		}
-	    }
-	  else if (CPU_IS_HP_MC68K (cpu))
-	    puts ("m68k-hitachi-hiuxwe2");
-	  else puts ("unknown-hitachi-hiuxwe2");
-	  exit (0);
-	}
-EOF
-	$CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` &&
-		{ echo "$SYSTEM_NAME"; exit; }
-	echo unknown-hitachi-hiuxwe2
-	exit ;;
-    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:*)
-	echo hppa1.1-hp-bsd
-	exit ;;
-    9000/8??:4.3bsd:*:*)
-	echo hppa1.0-hp-bsd
-	exit ;;
-    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
-	echo hppa1.0-hp-mpeix
-	exit ;;
-    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:*)
-	echo hppa1.1-hp-osf
-	exit ;;
-    hp8??:OSF1:*:*)
-	echo hppa1.0-hp-osf
-	exit ;;
-    i*86:OSF1:*:*)
-	if [ -x /usr/sbin/sysversion ] ; then
-	    echo "$UNAME_MACHINE"-unknown-osf1mk
-	else
-	    echo "$UNAME_MACHINE"-unknown-osf1
-	fi
-	exit ;;
-    parisc*:Lites*:*:*)
-	echo hppa1.1-hp-lites
-	exit ;;
-    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
-	echo c1-convex-bsd
-	exit ;;
-    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
-	if getsysinfo -f scalar_acc
-	then echo c32-convex-bsd
-	else echo c2-convex-bsd
-	fi
-	exit ;;
-    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
-	echo c34-convex-bsd
-	exit ;;
-    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
-	echo c38-convex-bsd
-	exit ;;
-    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
-	echo c4-convex-bsd
-	exit ;;
-    CRAY*Y-MP:*:*:*)
-	echo ymp-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
-	exit ;;
-    CRAY*[A-Z]90:*:*:*)
-	echo "$UNAME_MACHINE"-cray-unicos"$UNAME_RELEASE" \
-	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
-	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
-	      -e 's/\.[^.]*$/.X/'
-	exit ;;
-    CRAY*TS:*:*:*)
-	echo t90-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
-	exit ;;
-    CRAY*T3E:*:*:*)
-	echo alphaev5-cray-unicosmk"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
-	exit ;;
-    CRAY*SV1:*:*:*)
-	echo sv1-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
-	exit ;;
-    *:UNICOS/mp:*:*)
-	echo craynv-cray-unicosmp"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
-	exit ;;
-    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
-	FUJITSU_PROC=`uname -m | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`
-	FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
-	FUJITSU_REL=`echo "$UNAME_RELEASE" | sed -e 's/ /_/'`
-	echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
-	exit ;;
-    5000:UNIX_System_V:4.*:*)
-	FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
-	FUJITSU_REL=`echo "$UNAME_RELEASE" | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'`
-	echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
-	exit ;;
-    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
-	echo "$UNAME_MACHINE"-pc-bsdi"$UNAME_RELEASE"
-	exit ;;
-    sparc*:BSD/OS:*:*)
-	echo sparc-unknown-bsdi"$UNAME_RELEASE"
-	exit ;;
-    *:BSD/OS:*:*)
-	echo "$UNAME_MACHINE"-unknown-bsdi"$UNAME_RELEASE"
-	exit ;;
-    *:FreeBSD:*:*)
-	UNAME_PROCESSOR=`/usr/bin/uname -p`
-	case "$UNAME_PROCESSOR" in
-	    amd64)
-		UNAME_PROCESSOR=x86_64 ;;
-	    i386)
-		UNAME_PROCESSOR=i586 ;;
-	esac
-	echo "$UNAME_PROCESSOR"-unknown-freebsd"`echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`"
-	exit ;;
-    i*:CYGWIN*:*)
-	echo "$UNAME_MACHINE"-pc-cygwin
-	exit ;;
-    *:MINGW64*:*)
-	echo "$UNAME_MACHINE"-pc-mingw64
-	exit ;;
-    *:MINGW*:*)
-	echo "$UNAME_MACHINE"-pc-mingw32
-	exit ;;
-    *:MSYS*:*)
-	echo "$UNAME_MACHINE"-pc-msys
-	exit ;;
-    i*:PW*:*)
-	echo "$UNAME_MACHINE"-pc-pw32
-	exit ;;
-    *:Interix*:*)
-	case "$UNAME_MACHINE" in
-	    x86)
-		echo i586-pc-interix"$UNAME_RELEASE"
-		exit ;;
-	    authenticamd | genuineintel | EM64T)
-		echo x86_64-unknown-interix"$UNAME_RELEASE"
-		exit ;;
-	    IA64)
-		echo ia64-unknown-interix"$UNAME_RELEASE"
-		exit ;;
-	esac ;;
-    i*:UWIN*:*)
-	echo "$UNAME_MACHINE"-pc-uwin
-	exit ;;
-    amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
-	echo x86_64-unknown-cygwin
-	exit ;;
-    prep*:SunOS:5.*:*)
-	echo powerpcle-unknown-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`"
-	exit ;;
-    *:GNU:*:*)
-	# the GNU system
-	echo "`echo "$UNAME_MACHINE"|sed -e 's,[-/].*$,,'`-unknown-$LIBC`echo "$UNAME_RELEASE"|sed -e 's,/.*$,,'`"
-	exit ;;
-    *:GNU/*:*:*)
-	# other systems with GNU libc and userland
-	echo "$UNAME_MACHINE-unknown-`echo "$UNAME_SYSTEM" | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"``echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`-$LIBC"
-	exit ;;
-    i*86:Minix:*:*)
-	echo "$UNAME_MACHINE"-pc-minix
-	exit ;;
-    aarch64:Linux:*:*)
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    aarch64_be:Linux:*:*)
-	UNAME_MACHINE=aarch64_be
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    alpha:Linux:*:*)
-	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
-	  EV5)   UNAME_MACHINE=alphaev5 ;;
-	  EV56)  UNAME_MACHINE=alphaev56 ;;
-	  PCA56) UNAME_MACHINE=alphapca56 ;;
-	  PCA57) UNAME_MACHINE=alphapca56 ;;
-	  EV6)   UNAME_MACHINE=alphaev6 ;;
-	  EV67)  UNAME_MACHINE=alphaev67 ;;
-	  EV68*) UNAME_MACHINE=alphaev68 ;;
-	esac
-	objdump --private-headers /bin/sh | grep -q ld.so.1
-	if test "$?" = 0 ; then LIBC=gnulibc1 ; fi
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    arc:Linux:*:* | arceb:Linux:*:*)
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    arm*:Linux:*:*)
-	eval "$set_cc_for_build"
-	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
-	    | grep -q __ARM_EABI__
-	then
-	    echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	else
-	    if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
-		| grep -q __ARM_PCS_VFP
-	    then
-		echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"eabi
-	    else
-		echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"eabihf
-	    fi
-	fi
-	exit ;;
-    avr32*:Linux:*:*)
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    cris:Linux:*:*)
-	echo "$UNAME_MACHINE"-axis-linux-"$LIBC"
-	exit ;;
-    crisv32:Linux:*:*)
-	echo "$UNAME_MACHINE"-axis-linux-"$LIBC"
-	exit ;;
-    e2k:Linux:*:*)
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    frv:Linux:*:*)
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    hexagon:Linux:*:*)
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    i*86:Linux:*:*)
-	echo "$UNAME_MACHINE"-pc-linux-"$LIBC"
-	exit ;;
-    ia64:Linux:*:*)
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    k1om:Linux:*:*)
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    m32r*:Linux:*:*)
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    m68*:Linux:*:*)
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    mips:Linux:*:* | mips64:Linux:*:*)
-	eval "$set_cc_for_build"
-	sed 's/^	//' << EOF > "$dummy.c"
-	#undef CPU
-	#undef ${UNAME_MACHINE}
-	#undef ${UNAME_MACHINE}el
-	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
-	CPU=${UNAME_MACHINE}el
-	#else
-	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
-	CPU=${UNAME_MACHINE}
-	#else
-	CPU=
-	#endif
-	#endif
-EOF
-	eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^CPU'`"
-	test "x$CPU" != x && { echo "$CPU-unknown-linux-$LIBC"; exit; }
-	;;
-    mips64el:Linux:*:*)
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    openrisc*:Linux:*:*)
-	echo or1k-unknown-linux-"$LIBC"
-	exit ;;
-    or32:Linux:*:* | or1k*:Linux:*:*)
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    padre:Linux:*:*)
-	echo sparc-unknown-linux-"$LIBC"
-	exit ;;
-    parisc64:Linux:*:* | hppa64:Linux:*:*)
-	echo hppa64-unknown-linux-"$LIBC"
-	exit ;;
-    parisc:Linux:*:* | hppa:Linux:*:*)
-	# Look for CPU level
-	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
-	  PA7*) echo hppa1.1-unknown-linux-"$LIBC" ;;
-	  PA8*) echo hppa2.0-unknown-linux-"$LIBC" ;;
-	  *)    echo hppa-unknown-linux-"$LIBC" ;;
-	esac
-	exit ;;
-    ppc64:Linux:*:*)
-	echo powerpc64-unknown-linux-"$LIBC"
-	exit ;;
-    ppc:Linux:*:*)
-	echo powerpc-unknown-linux-"$LIBC"
-	exit ;;
-    ppc64le:Linux:*:*)
-	echo powerpc64le-unknown-linux-"$LIBC"
-	exit ;;
-    ppcle:Linux:*:*)
-	echo powerpcle-unknown-linux-"$LIBC"
-	exit ;;
-    riscv32:Linux:*:* | riscv64:Linux:*:*)
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    s390:Linux:*:* | s390x:Linux:*:*)
-	echo "$UNAME_MACHINE"-ibm-linux-"$LIBC"
-	exit ;;
-    sh64*:Linux:*:*)
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    sh*:Linux:*:*)
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    sparc:Linux:*:* | sparc64:Linux:*:*)
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    tile*:Linux:*:*)
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    vax:Linux:*:*)
-	echo "$UNAME_MACHINE"-dec-linux-"$LIBC"
-	exit ;;
-    x86_64:Linux:*:*)
-	echo "$UNAME_MACHINE"-pc-linux-"$LIBC"
-	exit ;;
-    xtensa*:Linux:*:*)
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    i*86:DYNIX/ptx:4*:*)
-	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
-	# earlier versions are messed up and put the nodename in both
-	# sysname and nodename.
-	echo i386-sequent-sysv4
-	exit ;;
-    i*86:UNIX_SV:4.2MP:2.*)
-	# Unixware is an offshoot of SVR4, but it has its own version
-	# number series starting with 2...
-	# I am not positive that other SVR4 systems won't match this,
-	# I just have to hope.  -- rms.
-	# Use sysv4.2uw... so that sysv4* matches it.
-	echo "$UNAME_MACHINE"-pc-sysv4.2uw"$UNAME_VERSION"
-	exit ;;
-    i*86:OS/2:*:*)
-	# If we were able to find `uname', then EMX Unix compatibility
-	# is probably installed.
-	echo "$UNAME_MACHINE"-pc-os2-emx
-	exit ;;
-    i*86:XTS-300:*:STOP)
-	echo "$UNAME_MACHINE"-unknown-stop
-	exit ;;
-    i*86:atheos:*:*)
-	echo "$UNAME_MACHINE"-unknown-atheos
-	exit ;;
-    i*86:syllable:*:*)
-	echo "$UNAME_MACHINE"-pc-syllable
-	exit ;;
-    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
-	echo i386-unknown-lynxos"$UNAME_RELEASE"
-	exit ;;
-    i*86:*DOS:*:*)
-	echo "$UNAME_MACHINE"-pc-msdosdjgpp
-	exit ;;
-    i*86:*:4.*:*)
-	UNAME_REL=`echo "$UNAME_RELEASE" | sed 's/\/MP$//'`
-	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
-		echo "$UNAME_MACHINE"-univel-sysv"$UNAME_REL"
-	else
-		echo "$UNAME_MACHINE"-pc-sysv"$UNAME_REL"
-	fi
-	exit ;;
-    i*86:*:5:[678]*)
-	# UnixWare 7.x, OpenUNIX and OpenServer 6.
-	case `/bin/uname -X | grep "^Machine"` in
-	    *486*)	     UNAME_MACHINE=i486 ;;
-	    *Pentium)	     UNAME_MACHINE=i586 ;;
-	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
-	esac
-	echo "$UNAME_MACHINE-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}{$UNAME_VERSION}"
-	exit ;;
-    i*86:*:3.2:*)
-	if test -f /usr/options/cb.name; then
-		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
-		echo "$UNAME_MACHINE"-pc-isc"$UNAME_REL"
-	elif /bin/uname -X 2>/dev/null >/dev/null ; then
-		UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
-		(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
-		(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
-			&& UNAME_MACHINE=i586
-		(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
-			&& UNAME_MACHINE=i686
-		(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
-			&& UNAME_MACHINE=i686
-		echo "$UNAME_MACHINE"-pc-sco"$UNAME_REL"
-	else
-		echo "$UNAME_MACHINE"-pc-sysv32
-	fi
-	exit ;;
-    pc:*:*:*)
-	# Left here for compatibility:
-	# uname -m prints for DJGPP always 'pc', but it prints nothing about
-	# the processor, so we play safe by assuming i586.
-	# Note: whatever this is, it MUST be the same as what config.sub
-	# prints for the "djgpp" host, or else GDB configure will decide that
-	# this is a cross-build.
-	echo i586-pc-msdosdjgpp
-	exit ;;
-    Intel:Mach:3*:*)
-	echo i386-pc-mach3
-	exit ;;
-    paragon:*:*:*)
-	echo i860-intel-osf1
-	exit ;;
-    i860:*:4.*:*) # i860-SVR4
-	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
-	  echo i860-stardent-sysv"$UNAME_RELEASE" # Stardent Vistra i860-SVR4
-	else # Add other i860-SVR4 vendors below as they are discovered.
-	  echo i860-unknown-sysv"$UNAME_RELEASE"  # Unknown i860-SVR4
-	fi
-	exit ;;
-    mini*:CTIX:SYS*5:*)
-	# "miniframe"
-	echo m68010-convergent-sysv
-	exit ;;
-    mc68k:UNIX:SYSTEM5:3.51m)
-	echo m68k-convergent-sysv
-	exit ;;
-    M680?0:D-NIX:5.3:*)
-	echo m68k-diab-dnix
-	exit ;;
-    M68*:*:R3V[5678]*:*)
-	test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
-    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
-	OS_REL=''
-	test -r /etc/.relid \
-	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
-	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-	  && { echo i486-ncr-sysv4.3"$OS_REL"; exit; }
-	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
-	  && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;;
-    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
-	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-	  && { echo i486-ncr-sysv4; exit; } ;;
-    NCR*:*:4.2:* | MPRAS*:*:4.2:*)
-	OS_REL='.3'
-	test -r /etc/.relid \
-	    && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
-	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-	    && { echo i486-ncr-sysv4.3"$OS_REL"; exit; }
-	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
-	    && { echo i586-ncr-sysv4.3"$OS_REL"; exit; }
-	/bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
-	    && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;;
-    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
-	echo m68k-unknown-lynxos"$UNAME_RELEASE"
-	exit ;;
-    mc68030:UNIX_System_V:4.*:*)
-	echo m68k-atari-sysv4
-	exit ;;
-    TSUNAMI:LynxOS:2.*:*)
-	echo sparc-unknown-lynxos"$UNAME_RELEASE"
-	exit ;;
-    rs6000:LynxOS:2.*:*)
-	echo rs6000-unknown-lynxos"$UNAME_RELEASE"
-	exit ;;
-    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
-	echo powerpc-unknown-lynxos"$UNAME_RELEASE"
-	exit ;;
-    SM[BE]S:UNIX_SV:*:*)
-	echo mips-dde-sysv"$UNAME_RELEASE"
-	exit ;;
-    RM*:ReliantUNIX-*:*:*)
-	echo mips-sni-sysv4
-	exit ;;
-    RM*:SINIX-*:*:*)
-	echo mips-sni-sysv4
-	exit ;;
-    *:SINIX-*:*:*)
-	if uname -p 2>/dev/null >/dev/null ; then
-		UNAME_MACHINE=`(uname -p) 2>/dev/null`
-		echo "$UNAME_MACHINE"-sni-sysv4
-	else
-		echo ns32k-sni-sysv
-	fi
-	exit ;;
-    PENTIUM:*:4.0*:*)	# Unisys `ClearPath HMP IX 4000' SVR4/MP effort
-			# says <Richard.M.Bartel@ccMail.Census.GOV>
-	echo i586-unisys-sysv4
-	exit ;;
-    *:UNIX_System_V:4*:FTX*)
-	# From Gerald Hewes <hewes@openmarket.com>.
-	# How about differentiating between stratus architectures? -djm
-	echo hppa1.1-stratus-sysv4
-	exit ;;
-    *:*:*:FTX*)
-	# From seanf@swdc.stratus.com.
-	echo i860-stratus-sysv4
-	exit ;;
-    i*86:VOS:*:*)
-	# From Paul.Green@stratus.com.
-	echo "$UNAME_MACHINE"-stratus-vos
-	exit ;;
-    *:VOS:*:*)
-	# From Paul.Green@stratus.com.
-	echo hppa1.1-stratus-vos
-	exit ;;
-    mc68*:A/UX:*:*)
-	echo m68k-apple-aux"$UNAME_RELEASE"
-	exit ;;
-    news*:NEWS-OS:6*:*)
-	echo mips-sony-newsos6
-	exit ;;
-    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
-	if [ -d /usr/nec ]; then
-		echo mips-nec-sysv"$UNAME_RELEASE"
-	else
-		echo mips-unknown-sysv"$UNAME_RELEASE"
-	fi
-	exit ;;
-    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
-	echo powerpc-be-beos
-	exit ;;
-    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
-	echo powerpc-apple-beos
-	exit ;;
-    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
-	echo i586-pc-beos
-	exit ;;
-    BePC:Haiku:*:*)	# Haiku running on Intel PC compatible.
-	echo i586-pc-haiku
-	exit ;;
-    x86_64:Haiku:*:*)
-	echo x86_64-unknown-haiku
-	exit ;;
-    SX-4:SUPER-UX:*:*)
-	echo sx4-nec-superux"$UNAME_RELEASE"
-	exit ;;
-    SX-5:SUPER-UX:*:*)
-	echo sx5-nec-superux"$UNAME_RELEASE"
-	exit ;;
-    SX-6:SUPER-UX:*:*)
-	echo sx6-nec-superux"$UNAME_RELEASE"
-	exit ;;
-    SX-7:SUPER-UX:*:*)
-	echo sx7-nec-superux"$UNAME_RELEASE"
-	exit ;;
-    SX-8:SUPER-UX:*:*)
-	echo sx8-nec-superux"$UNAME_RELEASE"
-	exit ;;
-    SX-8R:SUPER-UX:*:*)
-	echo sx8r-nec-superux"$UNAME_RELEASE"
-	exit ;;
-    SX-ACE:SUPER-UX:*:*)
-	echo sxace-nec-superux"$UNAME_RELEASE"
-	exit ;;
-    Power*:Rhapsody:*:*)
-	echo powerpc-apple-rhapsody"$UNAME_RELEASE"
-	exit ;;
-    *:Rhapsody:*:*)
-	echo "$UNAME_MACHINE"-apple-rhapsody"$UNAME_RELEASE"
-	exit ;;
-    *:Darwin:*:*)
-	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
-	eval "$set_cc_for_build"
-	if test "$UNAME_PROCESSOR" = unknown ; then
-	    UNAME_PROCESSOR=powerpc
-	fi
-	if test "`echo "$UNAME_RELEASE" | sed -e 's/\..*//'`" -le 10 ; then
-	    if [ "$CC_FOR_BUILD" != no_compiler_found ]; then
-		if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
-		       (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
-		       grep IS_64BIT_ARCH >/dev/null
-		then
-		    case $UNAME_PROCESSOR in
-			i386) UNAME_PROCESSOR=x86_64 ;;
-			powerpc) UNAME_PROCESSOR=powerpc64 ;;
-		    esac
-		fi
-		# On 10.4-10.6 one might compile for PowerPC via gcc -arch ppc
-		if (echo '#ifdef __POWERPC__'; echo IS_PPC; echo '#endif') | \
-		       (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
-		       grep IS_PPC >/dev/null
-		then
-		    UNAME_PROCESSOR=powerpc
-		fi
-	    fi
-	elif test "$UNAME_PROCESSOR" = i386 ; then
-	    # Avoid executing cc on OS X 10.9, as it ships with a stub
-	    # that puts up a graphical alert prompting to install
-	    # developer tools.  Any system running Mac OS X 10.7 or
-	    # later (Darwin 11 and later) is required to have a 64-bit
-	    # processor. This is not true of the ARM version of Darwin
-	    # that Apple uses in portable devices.
-	    UNAME_PROCESSOR=x86_64
-	fi
-	echo "$UNAME_PROCESSOR"-apple-darwin"$UNAME_RELEASE"
-	exit ;;
-    *:procnto*:*:* | *:QNX:[0123456789]*:*)
-	UNAME_PROCESSOR=`uname -p`
-	if test "$UNAME_PROCESSOR" = x86; then
-		UNAME_PROCESSOR=i386
-		UNAME_MACHINE=pc
-	fi
-	echo "$UNAME_PROCESSOR"-"$UNAME_MACHINE"-nto-qnx"$UNAME_RELEASE"
-	exit ;;
-    *:QNX:*:4*)
-	echo i386-pc-qnx
-	exit ;;
-    NEO-*:NONSTOP_KERNEL:*:*)
-	echo neo-tandem-nsk"$UNAME_RELEASE"
-	exit ;;
-    NSE-*:NONSTOP_KERNEL:*:*)
-	echo nse-tandem-nsk"$UNAME_RELEASE"
-	exit ;;
-    NSR-*:NONSTOP_KERNEL:*:*)
-	echo nsr-tandem-nsk"$UNAME_RELEASE"
-	exit ;;
-    NSV-*:NONSTOP_KERNEL:*:*)
-	echo nsv-tandem-nsk"$UNAME_RELEASE"
-	exit ;;
-    NSX-*:NONSTOP_KERNEL:*:*)
-	echo nsx-tandem-nsk"$UNAME_RELEASE"
-	exit ;;
-    *:NonStop-UX:*:*)
-	echo mips-compaq-nonstopux
-	exit ;;
-    BS2000:POSIX*:*:*)
-	echo bs2000-siemens-sysv
-	exit ;;
-    DS/*:UNIX_System_V:*:*)
-	echo "$UNAME_MACHINE"-"$UNAME_SYSTEM"-"$UNAME_RELEASE"
-	exit ;;
-    *:Plan9:*:*)
-	# "uname -m" is not consistent, so use $cputype instead. 386
-	# is converted to i386 for consistency with other x86
-	# operating systems.
-	if test "$cputype" = 386; then
-	    UNAME_MACHINE=i386
-	else
-	    UNAME_MACHINE="$cputype"
-	fi
-	echo "$UNAME_MACHINE"-unknown-plan9
-	exit ;;
-    *:TOPS-10:*:*)
-	echo pdp10-unknown-tops10
-	exit ;;
-    *:TENEX:*:*)
-	echo pdp10-unknown-tenex
-	exit ;;
-    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
-	echo pdp10-dec-tops20
-	exit ;;
-    XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
-	echo pdp10-xkl-tops20
-	exit ;;
-    *:TOPS-20:*:*)
-	echo pdp10-unknown-tops20
-	exit ;;
-    *:ITS:*:*)
-	echo pdp10-unknown-its
-	exit ;;
-    SEI:*:*:SEIUX)
-	echo mips-sei-seiux"$UNAME_RELEASE"
-	exit ;;
-    *:DragonFly:*:*)
-	echo "$UNAME_MACHINE"-unknown-dragonfly"`echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`"
-	exit ;;
-    *:*VMS:*:*)
-	UNAME_MACHINE=`(uname -p) 2>/dev/null`
-	case "$UNAME_MACHINE" in
-	    A*) echo alpha-dec-vms ; exit ;;
-	    I*) echo ia64-dec-vms ; exit ;;
-	    V*) echo vax-dec-vms ; exit ;;
-	esac ;;
-    *:XENIX:*:SysV)
-	echo i386-pc-xenix
-	exit ;;
-    i*86:skyos:*:*)
-	echo "$UNAME_MACHINE"-pc-skyos"`echo "$UNAME_RELEASE" | sed -e 's/ .*$//'`"
-	exit ;;
-    i*86:rdos:*:*)
-	echo "$UNAME_MACHINE"-pc-rdos
-	exit ;;
-    i*86:AROS:*:*)
-	echo "$UNAME_MACHINE"-pc-aros
-	exit ;;
-    x86_64:VMkernel:*:*)
-	echo "$UNAME_MACHINE"-unknown-esx
-	exit ;;
-    amd64:Isilon\ OneFS:*:*)
-	echo x86_64-unknown-onefs
-	exit ;;
-esac
-
-echo "$0: unable to guess system type" >&2
-
-case "$UNAME_MACHINE:$UNAME_SYSTEM" in
-    mips:Linux | mips64:Linux)
-	# If we got here on MIPS GNU/Linux, output extra information.
-	cat >&2 <<EOF
-
-NOTE: MIPS GNU/Linux systems require a C compiler to fully recognize
-the system type. Please install a C compiler and try again.
-EOF
-	;;
-esac
-
-cat >&2 <<EOF
-
-This script (version $timestamp), has failed to recognize the
-operating system you are using. If your script is old, overwrite *all*
-copies of config.guess and config.sub with the latest versions from:
-
-  https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess
-and
-  https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub
-
-If $0 has already been updated, send the following data and any
-information you think might be pertinent to config-patches@gnu.org to
-provide the necessary information to handle your system.
-
-config.guess timestamp = $timestamp
-
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
-/bin/uname -X     = `(/bin/uname -X) 2>/dev/null`
-
-hostinfo               = `(hostinfo) 2>/dev/null`
-/bin/universe          = `(/bin/universe) 2>/dev/null`
-/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null`
-/bin/arch              = `(/bin/arch) 2>/dev/null`
-/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
-
-UNAME_MACHINE = "$UNAME_MACHINE"
-UNAME_RELEASE = "$UNAME_RELEASE"
-UNAME_SYSTEM  = "$UNAME_SYSTEM"
-UNAME_VERSION = "$UNAME_VERSION"
-EOF
-
-exit 1
-
-# Local variables:
-# eval: (add-hook 'before-save-hook 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
diff --git c/libcody/build-aux/config.sub w/libcody/build-aux/config.sub
deleted file mode 100755
index 20f7cf29a9e..00000000000
--- c/libcody/build-aux/config.sub
+++ /dev/null
@@ -1,1833 +0,0 @@
-#! /bin/sh
-# Configuration validation subroutine script.
-#   Copyright 1992-2018 Free Software Foundation, Inc.
-
-timestamp='2018-05-05'
-
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, see <https://www.gnu.org/licenses/>.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that
-# program.  This Exception is an additional permission under section 7
-# of the GNU General Public License, version 3 ("GPLv3").
-
-
-# Please send patches to <config-patches@gnu.org>.
-#
-# Configuration subroutine to validate and canonicalize a configuration type.
-# Supply the specified configuration type as an argument.
-# If it is invalid, we print an error message on stderr and exit with code 1.
-# Otherwise, we print the canonical config type on stdout and succeed.
-
-# You can get the latest version of this script from:
-# https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub
-
-# This file is supposed to be the same for all GNU packages
-# and recognize all the CPU types, system types and aliases
-# that are meaningful with *any* GNU software.
-# Each package is responsible for reporting which valid configurations
-# it does not support.  The user should be able to distinguish
-# a failure to support a valid configuration from a meaningless
-# configuration.
-
-# The goal of this file is to map all the various variations of a given
-# machine specification into a single specification in the form:
-#	CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
-# or in some cases, the newer four-part form:
-#	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
-# It is wrong to echo any other type of specification.
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION] CPU-MFR-OPSYS or ALIAS
-
-Canonicalize a configuration name.
-
-Options:
-  -h, --help         print this help, then exit
-  -t, --time-stamp   print date of last modification, then exit
-  -v, --version      print version number, then exit
-
-Report bugs and patches to <config-patches@gnu.org>."
-
-version="\
-GNU config.sub ($timestamp)
-
-Copyright 1992-2018 Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions.  There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
-  case $1 in
-    --time-stamp | --time* | -t )
-       echo "$timestamp" ; exit ;;
-    --version | -v )
-       echo "$version" ; exit ;;
-    --help | --h* | -h )
-       echo "$usage"; exit ;;
-    -- )     # Stop option processing
-       shift; break ;;
-    - )	# Use stdin as input.
-       break ;;
-    -* )
-       echo "$me: invalid option $1$help"
-       exit 1 ;;
-
-    *local*)
-       # First pass through any local machine types.
-       echo "$1"
-       exit ;;
-
-    * )
-       break ;;
-  esac
-done
-
-case $# in
- 0) echo "$me: missing argument$help" >&2
-    exit 1;;
- 1) ;;
- *) echo "$me: too many arguments$help" >&2
-    exit 1;;
-esac
-
-# Spilt fields of configuration type
-IFS="-" read -r field1 field2 field3 field4 <<EOF
-$1
-EOF
-
-# Separate into logical components for further validation
-case $1 in
-	*-*-*-*)
-		basic_machine=$field1-$field2
-		os=-$field3-$field4
-		;;
-	*-*-*)
-		# Ambiguous whether COMPANY is present, or skipped and KERNEL-OS is two
-		# parts
-		maybe_os=$field2-$field3
-		case $maybe_os in
-			nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc \
-			| linux-newlib* | linux-musl* | linux-uclibc* | uclinux-uclibc* \
-			| uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* \
-			| netbsd*-eabi* | kopensolaris*-gnu* | cloudabi*-eabi* \
-			| storm-chaos* | os2-emx* | rtmk-nova*)
-				basic_machine=$field1
-				os=-$maybe_os
-				;;
-			android-linux)
-				basic_machine=$field1-unknown
-				os=-linux-android
-				;;
-			*)
-				basic_machine=$field1-$field2
-				os=-$field3
-				;;
-		esac
-		;;
-	*-*)
-		basic_machine=$field1
-		os=-$field2
-		;;
-	*)
-		basic_machine=$1
-		os=
-		;;
-esac
-
-### Let's recognize common machines as not being operating systems so
-### that things like config.sub decstation-3100 work.  We also
-### recognize some manufacturers as not being operating systems, so we
-### can provide default operating systems below.
-case $os in
-	-sun*os*)
-		# Prevent following clause from handling this invalid input.
-		;;
-	-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
-	-att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
-	-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
-	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
-	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
-	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
-	-apple | -axis | -knuth | -cray | -microblaze*)
-		os=
-		basic_machine=$1
-		;;
-	-bluegene*)
-		os=-cnk
-		;;
-	-sim | -cisco | -oki | -wec | -winbond)
-		os=
-		basic_machine=$1
-		;;
-	-scout)
-		;;
-	-wrs)
-		os=-vxworks
-		basic_machine=$1
-		;;
-	-chorusos*)
-		os=-chorusos
-		basic_machine=$1
-		;;
-	-chorusrdb)
-		os=-chorusrdb
-		basic_machine=$1
-		;;
-	-hiux*)
-		os=-hiuxwe2
-		;;
-	-sco6)
-		os=-sco5v6
-		basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco5)
-		os=-sco3.2v5
-		basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco4)
-		os=-sco3.2v4
-		basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco3.2.[4-9]*)
-		os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
-		basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco3.2v[4-9]*)
-		# Don't forget version if it is 3.2v4 or newer.
-		basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco5v6*)
-		# Don't forget version if it is 3.2v4 or newer.
-		basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco*)
-		os=-sco3.2v2
-		basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
-		;;
-	-udk*)
-		basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
-		;;
-	-isc)
-		os=-isc2.2
-		basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
-		;;
-	-clix*)
-		basic_machine=clipper-intergraph
-		;;
-	-isc*)
-		basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
-		;;
-	-lynx*178)
-		os=-lynxos178
-		;;
-	-lynx*5)
-		os=-lynxos5
-		;;
-	-lynx*)
-		os=-lynxos
-		;;
-	-ptx*)
-		basic_machine=`echo "$1" | sed -e 's/86-.*/86-sequent/'`
-		;;
-	-psos*)
-		os=-psos
-		;;
-	-mint | -mint[0-9]*)
-		basic_machine=m68k-atari
-		os=-mint
-		;;
-esac
-
-# Decode aliases for certain CPU-COMPANY combinations.
-case $basic_machine in
-	# Recognize the basic CPU types without company name.
-	# Some are omitted here because they have special meanings below.
-	1750a | 580 \
-	| a29k \
-	| aarch64 | aarch64_be \
-	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
-	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
-	| am33_2.0 \
-	| arc | arceb \
-	| arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv6m | armv[78][arm] \
-	| avr | avr32 \
-	| ba \
-	| be32 | be64 \
-	| bfin \
-	| c4x | c8051 | clipper | csky \
-	| d10v | d30v | dlx | dsp16xx \
-	| e2k | epiphany \
-	| fido | fr30 | frv | ft32 \
-	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
-	| hexagon \
-	| i370 | i860 | i960 | ia16 | ia64 \
-	| ip2k | iq2000 \
-	| k1om \
-	| le32 | le64 \
-	| lm32 \
-	| m32c | m32r | m32rle | m68000 | m68k | m88k \
-	| maxq | mb | microblaze | microblazeel | mcore | mep | metag \
-	| mips | mipsbe | mipseb | mipsel | mipsle \
-	| mips16 \
-	| mips64 | mips64el \
-	| mips64octeon | mips64octeonel \
-	| mips64orion | mips64orionel \
-	| mips64r5900 | mips64r5900el \
-	| mips64vr | mips64vrel \
-	| mips64vr4100 | mips64vr4100el \
-	| mips64vr4300 | mips64vr4300el \
-	| mips64vr5000 | mips64vr5000el \
-	| mips64vr5900 | mips64vr5900el \
-	| mipsisa32 | mipsisa32el \
-	| mipsisa32r2 | mipsisa32r2el \
-	| mipsisa32r6 | mipsisa32r6el \
-	| mipsisa64 | mipsisa64el \
-	| mipsisa64r2 | mipsisa64r2el \
-	| mipsisa64r6 | mipsisa64r6el \
-	| mipsisa64sb1 | mipsisa64sb1el \
-	| mipsisa64sr71k | mipsisa64sr71kel \
-	| mipsr5900 | mipsr5900el \
-	| mipstx39 | mipstx39el \
-	| mn10200 | mn10300 \
-	| moxie \
-	| mt \
-	| msp430 \
-	| nds32 | nds32le | nds32be \
-	| nfp \
-	| nios | nios2 | nios2eb | nios2el \
-	| ns16k | ns32k \
-	| open8 | or1k | or1knd | or32 \
-	| pdp10 | pj | pjl \
-	| powerpc | powerpc64 | powerpc64le | powerpcle \
-	| pru \
-	| pyramid \
-	| riscv32 | riscv64 \
-	| rl78 | rx \
-	| score \
-	| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[234]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
-	| sh64 | sh64le \
-	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
-	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
-	| spu \
-	| tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
-	| ubicom32 \
-	| v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
-	| visium \
-	| wasm32 \
-	| x86 | xc16x | xstormy16 | xtensa \
-	| z8k | z80)
-		basic_machine=$basic_machine-unknown
-		;;
-	c54x)
-		basic_machine=tic54x-unknown
-		;;
-	c55x)
-		basic_machine=tic55x-unknown
-		;;
-	c6x)
-		basic_machine=tic6x-unknown
-		;;
-	leon|leon[3-9])
-		basic_machine=sparc-$basic_machine
-		;;
-	m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip)
-		basic_machine=$basic_machine-unknown
-		os=-none
-		;;
-	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65)
-		;;
-	m9s12z | m68hcs12z | hcs12z | s12z)
-		basic_machine=s12z-unknown
-		os=-none
-		;;
-	ms1)
-		basic_machine=mt-unknown
-		;;
-
-	strongarm | thumb | xscale)
-		basic_machine=arm-unknown
-		;;
-	xgate)
-		basic_machine=$basic_machine-unknown
-		os=-none
-		;;
-	xscaleeb)
-		basic_machine=armeb-unknown
-		;;
-
-	xscaleel)
-		basic_machine=armel-unknown
-		;;
-
-	# We use `pc' rather than `unknown'
-	# because (1) that's what they normally are, and
-	# (2) the word "unknown" tends to confuse beginning users.
-	i*86 | x86_64)
-	  basic_machine=$basic_machine-pc
-	  ;;
-	# Object if more than one company name word.
-	*-*-*)
-		echo Invalid configuration \`"$1"\': machine \`"$basic_machine"\' not recognized 1>&2
-		exit 1
-		;;
-	# Recognize the basic CPU types with company name.
-	580-* \
-	| a29k-* \
-	| aarch64-* | aarch64_be-* \
-	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
-	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
-	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \
-	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
-	| avr-* | avr32-* \
-	| ba-* \
-	| be32-* | be64-* \
-	| bfin-* | bs2000-* \
-	| c[123]* | c30-* | [cjt]90-* | c4x-* \
-	| c8051-* | clipper-* | craynv-* | csky-* | cydra-* \
-	| d10v-* | d30v-* | dlx-* \
-	| e2k-* | elxsi-* \
-	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
-	| h8300-* | h8500-* \
-	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
-	| hexagon-* \
-	| i*86-* | i860-* | i960-* | ia16-* | ia64-* \
-	| ip2k-* | iq2000-* \
-	| k1om-* \
-	| le32-* | le64-* \
-	| lm32-* \
-	| m32c-* | m32r-* | m32rle-* \
-	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
-	| m88110-* | m88k-* | maxq-* | mcore-* | metag-* \
-	| microblaze-* | microblazeel-* \
-	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
-	| mips16-* \
-	| mips64-* | mips64el-* \
-	| mips64octeon-* | mips64octeonel-* \
-	| mips64orion-* | mips64orionel-* \
-	| mips64r5900-* | mips64r5900el-* \
-	| mips64vr-* | mips64vrel-* \
-	| mips64vr4100-* | mips64vr4100el-* \
-	| mips64vr4300-* | mips64vr4300el-* \
-	| mips64vr5000-* | mips64vr5000el-* \
-	| mips64vr5900-* | mips64vr5900el-* \
-	| mipsisa32-* | mipsisa32el-* \
-	| mipsisa32r2-* | mipsisa32r2el-* \
-	| mipsisa32r6-* | mipsisa32r6el-* \
-	| mipsisa64-* | mipsisa64el-* \
-	| mipsisa64r2-* | mipsisa64r2el-* \
-	| mipsisa64r6-* | mipsisa64r6el-* \
-	| mipsisa64sb1-* | mipsisa64sb1el-* \
-	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
-	| mipsr5900-* | mipsr5900el-* \
-	| mipstx39-* | mipstx39el-* \
-	| mmix-* \
-	| mt-* \
-	| msp430-* \
-	| nds32-* | nds32le-* | nds32be-* \
-	| nfp-* \
-	| nios-* | nios2-* | nios2eb-* | nios2el-* \
-	| none-* | np1-* | ns16k-* | ns32k-* \
-	| open8-* \
-	| or1k*-* \
-	| orion-* \
-	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
-	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
-	| pru-* \
-	| pyramid-* \
-	| riscv32-* | riscv64-* \
-	| rl78-* | romp-* | rs6000-* | rx-* \
-	| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
-	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
-	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
-	| sparclite-* \
-	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx*-* \
-	| tahoe-* \
-	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
-	| tile*-* \
-	| tron-* \
-	| ubicom32-* \
-	| v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
-	| vax-* \
-	| visium-* \
-	| wasm32-* \
-	| we32k-* \
-	| x86-* | x86_64-* | xc16x-* | xps100-* \
-	| xstormy16-* | xtensa*-* \
-	| ymp-* \
-	| z8k-* | z80-*)
-		;;
-	# Recognize the basic CPU types without company name, with glob match.
-	xtensa*)
-		basic_machine=$basic_machine-unknown
-		;;
-	# Recognize the various machine names and aliases which stand
-	# for a CPU type and a company and sometimes even an OS.
-	386bsd)
-		basic_machine=i386-pc
-		os=-bsd
-		;;
-	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
-		basic_machine=m68000-att
-		;;
-	3b*)
-		basic_machine=we32k-att
-		;;
-	a29khif)
-		basic_machine=a29k-amd
-		os=-udi
-		;;
-	abacus)
-		basic_machine=abacus-unknown
-		;;
-	adobe68k)
-		basic_machine=m68010-adobe
-		os=-scout
-		;;
-	alliant | fx80)
-		basic_machine=fx80-alliant
-		;;
-	altos | altos3068)
-		basic_machine=m68k-altos
-		;;
-	am29k)
-		basic_machine=a29k-none
-		os=-bsd
-		;;
-	amd64)
-		basic_machine=x86_64-pc
-		;;
-	amd64-*)
-		basic_machine=x86_64-`echo "$basic_machine" | sed 's/^[^-]*-//'`
-		;;
-	amdahl)
-		basic_machine=580-amdahl
-		os=-sysv
-		;;
-	amiga | amiga-*)
-		basic_machine=m68k-unknown
-		;;
-	amigaos | amigados)
-		basic_machine=m68k-unknown
-		os=-amigaos
-		;;
-	amigaunix | amix)
-		basic_machine=m68k-unknown
-		os=-sysv4
-		;;
-	apollo68)
-		basic_machine=m68k-apollo
-		os=-sysv
-		;;
-	apollo68bsd)
-		basic_machine=m68k-apollo
-		os=-bsd
-		;;
-	aros)
-		basic_machine=i386-pc
-		os=-aros
-		;;
-	asmjs)
-		basic_machine=asmjs-unknown
-		;;
-	aux)
-		basic_machine=m68k-apple
-		os=-aux
-		;;
-	balance)
-		basic_machine=ns32k-sequent
-		os=-dynix
-		;;
-	blackfin)
-		basic_machine=bfin-unknown
-		os=-linux
-		;;
-	blackfin-*)
-		basic_machine=bfin-`echo "$basic_machine" | sed 's/^[^-]*-//'`
-		os=-linux
-		;;
-	bluegene*)
-		basic_machine=powerpc-ibm
-		os=-cnk
-		;;
-	c54x-*)
-		basic_machine=tic54x-`echo "$basic_machine" | sed 's/^[^-]*-//'`
-		;;
-	c55x-*)
-		basic_machine=tic55x-`echo "$basic_machine" | sed 's/^[^-]*-//'`
-		;;
-	c6x-*)
-		basic_machine=tic6x-`echo "$basic_machine" | sed 's/^[^-]*-//'`
-		;;
-	c90)
-		basic_machine=c90-cray
-		os=-unicos
-		;;
-	cegcc)
-		basic_machine=arm-unknown
-		os=-cegcc
-		;;
-	convex-c1)
-		basic_machine=c1-convex
-		os=-bsd
-		;;
-	convex-c2)
-		basic_machine=c2-convex
-		os=-bsd
-		;;
-	convex-c32)
-		basic_machine=c32-convex
-		os=-bsd
-		;;
-	convex-c34)
-		basic_machine=c34-convex
-		os=-bsd
-		;;
-	convex-c38)
-		basic_machine=c38-convex
-		os=-bsd
-		;;
-	cray | j90)
-		basic_machine=j90-cray
-		os=-unicos
-		;;
-	craynv)
-		basic_machine=craynv-cray
-		os=-unicosmp
-		;;
-	cr16 | cr16-*)
-		basic_machine=cr16-unknown
-		os=-elf
-		;;
-	crds | unos)
-		basic_machine=m68k-crds
-		;;
-	crisv32 | crisv32-* | etraxfs*)
-		basic_machine=crisv32-axis
-		;;
-	cris | cris-* | etrax*)
-		basic_machine=cris-axis
-		;;
-	crx)
-		basic_machine=crx-unknown
-		os=-elf
-		;;
-	da30 | da30-*)
-		basic_machine=m68k-da30
-		;;
-	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
-		basic_machine=mips-dec
-		;;
-	decsystem10* | dec10*)
-		basic_machine=pdp10-dec
-		os=-tops10
-		;;
-	decsystem20* | dec20*)
-		basic_machine=pdp10-dec
-		os=-tops20
-		;;
-	delta | 3300 | motorola-3300 | motorola-delta \
-	      | 3300-motorola | delta-motorola)
-		basic_machine=m68k-motorola
-		;;
-	delta88)
-		basic_machine=m88k-motorola
-		os=-sysv3
-		;;
-	dicos)
-		basic_machine=i686-pc
-		os=-dicos
-		;;
-	djgpp)
-		basic_machine=i586-pc
-		os=-msdosdjgpp
-		;;
-	dpx20 | dpx20-*)
-		basic_machine=rs6000-bull
-		os=-bosx
-		;;
-	dpx2*)
-		basic_machine=m68k-bull
-		os=-sysv3
-		;;
-	e500v[12])
-		basic_machine=powerpc-unknown
-		os=$os"spe"
-		;;
-	e500v[12]-*)
-		basic_machine=powerpc-`echo "$basic_machine" | sed 's/^[^-]*-//'`
-		os=$os"spe"
-		;;
-	ebmon29k)
-		basic_machine=a29k-amd
-		os=-ebmon
-		;;
-	elxsi)
-		basic_machine=elxsi-elxsi
-		os=-bsd
-		;;
-	encore | umax | mmax)
-		basic_machine=ns32k-encore
-		;;
-	es1800 | OSE68k | ose68k | ose | OSE)
-		basic_machine=m68k-ericsson
-		os=-ose
-		;;
-	fx2800)
-		basic_machine=i860-alliant
-		;;
-	genix)
-		basic_machine=ns32k-ns
-		;;
-	gmicro)
-		basic_machine=tron-gmicro
-		os=-sysv
-		;;
-	go32)
-		basic_machine=i386-pc
-		os=-go32
-		;;
-	h3050r* | hiux*)
-		basic_machine=hppa1.1-hitachi
-		os=-hiuxwe2
-		;;
-	h8300hms)
-		basic_machine=h8300-hitachi
-		os=-hms
-		;;
-	h8300xray)
-		basic_machine=h8300-hitachi
-		os=-xray
-		;;
-	h8500hms)
-		basic_machine=h8500-hitachi
-		os=-hms
-		;;
-	harris)
-		basic_machine=m88k-harris
-		os=-sysv3
-		;;
-	hp300-*)
-		basic_machine=m68k-hp
-		;;
-	hp300bsd)
-		basic_machine=m68k-hp
-		os=-bsd
-		;;
-	hp300hpux)
-		basic_machine=m68k-hp
-		os=-hpux
-		;;
-	hp3k9[0-9][0-9] | hp9[0-9][0-9])
-		basic_machine=hppa1.0-hp
-		;;
-	hp9k2[0-9][0-9] | hp9k31[0-9])
-		basic_machine=m68000-hp
-		;;
-	hp9k3[2-9][0-9])
-		basic_machine=m68k-hp
-		;;
-	hp9k6[0-9][0-9] | hp6[0-9][0-9])
-		basic_machine=hppa1.0-hp
-		;;
-	hp9k7[0-79][0-9] | hp7[0-79][0-9])
-		basic_machine=hppa1.1-hp
-		;;
-	hp9k78[0-9] | hp78[0-9])
-		# FIXME: really hppa2.0-hp
-		basic_machine=hppa1.1-hp
-		;;
-	hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
-		# FIXME: really hppa2.0-hp
-		basic_machine=hppa1.1-hp
-		;;
-	hp9k8[0-9][13679] | hp8[0-9][13679])
-		basic_machine=hppa1.1-hp
-		;;
-	hp9k8[0-9][0-9] | hp8[0-9][0-9])
-		basic_machine=hppa1.0-hp
-		;;
-	hppaosf)
-		basic_machine=hppa1.1-hp
-		os=-osf
-		;;
-	hppro)
-		basic_machine=hppa1.1-hp
-		os=-proelf
-		;;
-	i370-ibm* | ibm*)
-		basic_machine=i370-ibm
-		;;
-	i*86v32)
-		basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'`
-		os=-sysv32
-		;;
-	i*86v4*)
-		basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'`
-		os=-sysv4
-		;;
-	i*86v)
-		basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'`
-		os=-sysv
-		;;
-	i*86sol2)
-		basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'`
-		os=-solaris2
-		;;
-	i386mach)
-		basic_machine=i386-mach
-		os=-mach
-		;;
-	vsta)
-		basic_machine=i386-unknown
-		os=-vsta
-		;;
-	iris | iris4d)
-		basic_machine=mips-sgi
-		case $os in
-		    -irix*)
-			;;
-		    *)
-			os=-irix4
-			;;
-		esac
-		;;
-	isi68 | isi)
-		basic_machine=m68k-isi
-		os=-sysv
-		;;
-	leon-*|leon[3-9]-*)
-		basic_machine=sparc-`echo "$basic_machine" | sed 's/-.*//'`
-		;;
-	m68knommu)
-		basic_machine=m68k-unknown
-		os=-linux
-		;;
-	m68knommu-*)
-		basic_machine=m68k-`echo "$basic_machine" | sed 's/^[^-]*-//'`
-		os=-linux
-		;;
-	magnum | m3230)
-		basic_machine=mips-mips
-		os=-sysv
-		;;
-	merlin)
-		basic_machine=ns32k-utek
-		os=-sysv
-		;;
-	microblaze*)
-		basic_machine=microblaze-xilinx
-		;;
-	mingw64)
-		basic_machine=x86_64-pc
-		os=-mingw64
-		;;
-	mingw32)
-		basic_machine=i686-pc
-		os=-mingw32
-		;;
-	mingw32ce)
-		basic_machine=arm-unknown
-		os=-mingw32ce
-		;;
-	miniframe)
-		basic_machine=m68000-convergent
-		;;
-	*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
-		basic_machine=m68k-atari
-		os=-mint
-		;;
-	mips3*-*)
-		basic_machine=`echo "$basic_machine" | sed -e 's/mips3/mips64/'`
-		;;
-	mips3*)
-		basic_machine=`echo "$basic_machine" | sed -e 's/mips3/mips64/'`-unknown
-		;;
-	monitor)
-		basic_machine=m68k-rom68k
-		os=-coff
-		;;
-	morphos)
-		basic_machine=powerpc-unknown
-		os=-morphos
-		;;
-	moxiebox)
-		basic_machine=moxie-unknown
-		os=-moxiebox
-		;;
-	msdos)
-		basic_machine=i386-pc
-		os=-msdos
-		;;
-	ms1-*)
-		basic_machine=`echo "$basic_machine" | sed -e 's/ms1-/mt-/'`
-		;;
-	msys)
-		basic_machine=i686-pc
-		os=-msys
-		;;
-	mvs)
-		basic_machine=i370-ibm
-		os=-mvs
-		;;
-	nacl)
-		basic_machine=le32-unknown
-		os=-nacl
-		;;
-	ncr3000)
-		basic_machine=i486-ncr
-		os=-sysv4
-		;;
-	netbsd386)
-		basic_machine=i386-unknown
-		os=-netbsd
-		;;
-	netwinder)
-		basic_machine=armv4l-rebel
-		os=-linux
-		;;
-	news | news700 | news800 | news900)
-		basic_machine=m68k-sony
-		os=-newsos
-		;;
-	news1000)
-		basic_machine=m68030-sony
-		os=-newsos
-		;;
-	news-3600 | risc-news)
-		basic_machine=mips-sony
-		os=-newsos
-		;;
-	necv70)
-		basic_machine=v70-nec
-		os=-sysv
-		;;
-	next | m*-next)
-		basic_machine=m68k-next
-		case $os in
-		    -nextstep* )
-			;;
-		    -ns2*)
-		      os=-nextstep2
-			;;
-		    *)
-		      os=-nextstep3
-			;;
-		esac
-		;;
-	nh3000)
-		basic_machine=m68k-harris
-		os=-cxux
-		;;
-	nh[45]000)
-		basic_machine=m88k-harris
-		os=-cxux
-		;;
-	nindy960)
-		basic_machine=i960-intel
-		os=-nindy
-		;;
-	mon960)
-		basic_machine=i960-intel
-		os=-mon960
-		;;
-	nonstopux)
-		basic_machine=mips-compaq
-		os=-nonstopux
-		;;
-	np1)
-		basic_machine=np1-gould
-		;;
-	neo-tandem)
-		basic_machine=neo-tandem
-		;;
-	nse-tandem)
-		basic_machine=nse-tandem
-		;;
-	nsr-tandem)
-		basic_machine=nsr-tandem
-		;;
-	nsv-tandem)
-		basic_machine=nsv-tandem
-		;;
-	nsx-tandem)
-		basic_machine=nsx-tandem
-		;;
-	op50n-* | op60c-*)
-		basic_machine=hppa1.1-oki
-		os=-proelf
-		;;
-	openrisc | openrisc-*)
-		basic_machine=or32-unknown
-		;;
-	os400)
-		basic_machine=powerpc-ibm
-		os=-os400
-		;;
-	OSE68000 | ose68000)
-		basic_machine=m68000-ericsson
-		os=-ose
-		;;
-	os68k)
-		basic_machine=m68k-none
-		os=-os68k
-		;;
-	pa-hitachi)
-		basic_machine=hppa1.1-hitachi
-		os=-hiuxwe2
-		;;
-	paragon)
-		basic_machine=i860-intel
-		os=-osf
-		;;
-	parisc)
-		basic_machine=hppa-unknown
-		os=-linux
-		;;
-	parisc-*)
-		basic_machine=hppa-`echo "$basic_machine" | sed 's/^[^-]*-//'`
-		os=-linux
-		;;
-	pbd)
-		basic_machine=sparc-tti
-		;;
-	pbb)
-		basic_machine=m68k-tti
-		;;
-	pc532 | pc532-*)
-		basic_machine=ns32k-pc532
-		;;
-	pc98)
-		basic_machine=i386-pc
-		;;
-	pc98-*)
-		basic_machine=i386-`echo "$basic_machine" | sed 's/^[^-]*-//'`
-		;;
-	pentium | p5 | k5 | k6 | nexgen | viac3)
-		basic_machine=i586-pc
-		;;
-	pentiumpro | p6 | 6x86 | athlon | athlon_*)
-		basic_machine=i686-pc
-		;;
-	pentiumii | pentium2 | pentiumiii | pentium3)
-		basic_machine=i686-pc
-		;;
-	pentium4)
-		basic_machine=i786-pc
-		;;
-	pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
-		basic_machine=i586-`echo "$basic_machine" | sed 's/^[^-]*-//'`
-		;;
-	pentiumpro-* | p6-* | 6x86-* | athlon-*)
-		basic_machine=i686-`echo "$basic_machine" | sed 's/^[^-]*-//'`
-		;;
-	pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
-		basic_machine=i686-`echo "$basic_machine" | sed 's/^[^-]*-//'`
-		;;
-	pentium4-*)
-		basic_machine=i786-`echo "$basic_machine" | sed 's/^[^-]*-//'`
-		;;
-	pn)
-		basic_machine=pn-gould
-		;;
-	power)	basic_machine=power-ibm
-		;;
-	ppc | ppcbe)	basic_machine=powerpc-unknown
-		;;
-	ppc-* | ppcbe-*)
-		basic_machine=powerpc-`echo "$basic_machine" | sed 's/^[^-]*-//'`
-		;;
-	ppcle | powerpclittle)
-		basic_machine=powerpcle-unknown
-		;;
-	ppcle-* | powerpclittle-*)
-		basic_machine=powerpcle-`echo "$basic_machine" | sed 's/^[^-]*-//'`
-		;;
-	ppc64)	basic_machine=powerpc64-unknown
-		;;
-	ppc64-*) basic_machine=powerpc64-`echo "$basic_machine" | sed 's/^[^-]*-//'`
-		;;
-	ppc64le | powerpc64little)
-		basic_machine=powerpc64le-unknown
-		;;
-	ppc64le-* | powerpc64little-*)
-		basic_machine=powerpc64le-`echo "$basic_machine" | sed 's/^[^-]*-//'`
-		;;
-	ps2)
-		basic_machine=i386-ibm
-		;;
-	pw32)
-		basic_machine=i586-unknown
-		os=-pw32
-		;;
-	rdos | rdos64)
-		basic_machine=x86_64-pc
-		os=-rdos
-		;;
-	rdos32)
-		basic_machine=i386-pc
-		os=-rdos
-		;;
-	rom68k)
-		basic_machine=m68k-rom68k
-		os=-coff
-		;;
-	rm[46]00)
-		basic_machine=mips-siemens
-		;;
-	rtpc | rtpc-*)
-		basic_machine=romp-ibm
-		;;
-	s390 | s390-*)
-		basic_machine=s390-ibm
-		;;
-	s390x | s390x-*)
-		basic_machine=s390x-ibm
-		;;
-	sa29200)
-		basic_machine=a29k-amd
-		os=-udi
-		;;
-	sb1)
-		basic_machine=mipsisa64sb1-unknown
-		;;
-	sb1el)
-		basic_machine=mipsisa64sb1el-unknown
-		;;
-	sde)
-		basic_machine=mipsisa32-sde
-		os=-elf
-		;;
-	sei)
-		basic_machine=mips-sei
-		os=-seiux
-		;;
-	sequent)
-		basic_machine=i386-sequent
-		;;
-	sh5el)
-		basic_machine=sh5le-unknown
-		;;
-	simso-wrs)
-		basic_machine=sparclite-wrs
-		os=-vxworks
-		;;
-	sps7)
-		basic_machine=m68k-bull
-		os=-sysv2
-		;;
-	spur)
-		basic_machine=spur-unknown
-		;;
-	st2000)
-		basic_machine=m68k-tandem
-		;;
-	stratus)
-		basic_machine=i860-stratus
-		os=-sysv4
-		;;
-	strongarm-* | thumb-*)
-		basic_machine=arm-`echo "$basic_machine" | sed 's/^[^-]*-//'`
-		;;
-	sun2)
-		basic_machine=m68000-sun
-		;;
-	sun2os3)
-		basic_machine=m68000-sun
-		os=-sunos3
-		;;
-	sun2os4)
-		basic_machine=m68000-sun
-		os=-sunos4
-		;;
-	sun3os3)
-		basic_machine=m68k-sun
-		os=-sunos3
-		;;
-	sun3os4)
-		basic_machine=m68k-sun
-		os=-sunos4
-		;;
-	sun4os3)
-		basic_machine=sparc-sun
-		os=-sunos3
-		;;
-	sun4os4)
-		basic_machine=sparc-sun
-		os=-sunos4
-		;;
-	sun4sol2)
-		basic_machine=sparc-sun
-		os=-solaris2
-		;;
-	sun3 | sun3-*)
-		basic_machine=m68k-sun
-		;;
-	sun4)
-		basic_machine=sparc-sun
-		;;
-	sun386 | sun386i | roadrunner)
-		basic_machine=i386-sun
-		;;
-	sv1)
-		basic_machine=sv1-cray
-		os=-unicos
-		;;
-	symmetry)
-		basic_machine=i386-sequent
-		os=-dynix
-		;;
-	t3e)
-		basic_machine=alphaev5-cray
-		os=-unicos
-		;;
-	t90)
-		basic_machine=t90-cray
-		os=-unicos
-		;;
-	tile*)
-		basic_machine=$basic_machine-unknown
-		os=-linux-gnu
-		;;
-	tx39)
-		basic_machine=mipstx39-unknown
-		;;
-	tx39el)
-		basic_machine=mipstx39el-unknown
-		;;
-	toad1)
-		basic_machine=pdp10-xkl
-		os=-tops20
-		;;
-	tower | tower-32)
-		basic_machine=m68k-ncr
-		;;
-	tpf)
-		basic_machine=s390x-ibm
-		os=-tpf
-		;;
-	udi29k)
-		basic_machine=a29k-amd
-		os=-udi
-		;;
-	ultra3)
-		basic_machine=a29k-nyu
-		os=-sym1
-		;;
-	v810 | necv810)
-		basic_machine=v810-nec
-		os=-none
-		;;
-	vaxv)
-		basic_machine=vax-dec
-		os=-sysv
-		;;
-	vms)
-		basic_machine=vax-dec
-		os=-vms
-		;;
-	vpp*|vx|vx-*)
-		basic_machine=f301-fujitsu
-		;;
-	vxworks960)
-		basic_machine=i960-wrs
-		os=-vxworks
-		;;
-	vxworks68)
-		basic_machine=m68k-wrs
-		os=-vxworks
-		;;
-	vxworks29k)
-		basic_machine=a29k-wrs
-		os=-vxworks
-		;;
-	w65*)
-		basic_machine=w65-wdc
-		os=-none
-		;;
-	w89k-*)
-		basic_machine=hppa1.1-winbond
-		os=-proelf
-		;;
-	x64)
-		basic_machine=x86_64-pc
-		;;
-	xbox)
-		basic_machine=i686-pc
-		os=-mingw32
-		;;
-	xps | xps100)
-		basic_machine=xps100-honeywell
-		;;
-	xscale-* | xscalee[bl]-*)
-		basic_machine=`echo "$basic_machine" | sed 's/^xscale/arm/'`
-		;;
-	ymp)
-		basic_machine=ymp-cray
-		os=-unicos
-		;;
-	none)
-		basic_machine=none-none
-		os=-none
-		;;
-
-# Here we handle the default manufacturer of certain CPU types.  It is in
-# some cases the only manufacturer, in others, it is the most popular.
-	w89k)
-		basic_machine=hppa1.1-winbond
-		;;
-	op50n)
-		basic_machine=hppa1.1-oki
-		;;
-	op60c)
-		basic_machine=hppa1.1-oki
-		;;
-	romp)
-		basic_machine=romp-ibm
-		;;
-	mmix)
-		basic_machine=mmix-knuth
-		;;
-	rs6000)
-		basic_machine=rs6000-ibm
-		;;
-	vax)
-		basic_machine=vax-dec
-		;;
-	pdp11)
-		basic_machine=pdp11-dec
-		;;
-	we32k)
-		basic_machine=we32k-att
-		;;
-	sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
-		basic_machine=sh-unknown
-		;;
-	cydra)
-		basic_machine=cydra-cydrome
-		;;
-	orion)
-		basic_machine=orion-highlevel
-		;;
-	orion105)
-		basic_machine=clipper-highlevel
-		;;
-	mac | mpw | mac-mpw)
-		basic_machine=m68k-apple
-		;;
-	pmac | pmac-mpw)
-		basic_machine=powerpc-apple
-		;;
-	*-unknown)
-		# Make sure to match an already-canonicalized machine name.
-		;;
-	*)
-		echo Invalid configuration \`"$1"\': machine \`"$basic_machine"\' not recognized 1>&2
-		exit 1
-		;;
-esac
-
-# Here we canonicalize certain aliases for manufacturers.
-case $basic_machine in
-	*-digital*)
-		basic_machine=`echo "$basic_machine" | sed 's/digital.*/dec/'`
-		;;
-	*-commodore*)
-		basic_machine=`echo "$basic_machine" | sed 's/commodore.*/cbm/'`
-		;;
-	*)
-		;;
-esac
-
-# Decode manufacturer-specific aliases for certain operating systems.
-
-if [ x$os != x ]
-then
-case $os in
-	# First match some system type aliases that might get confused
-	# with valid system types.
-	# -solaris* is a basic system type, with this one exception.
-	-auroraux)
-		os=-auroraux
-		;;
-	-solaris1 | -solaris1.*)
-		os=`echo $os | sed -e 's|solaris1|sunos4|'`
-		;;
-	-solaris)
-		os=-solaris2
-		;;
-	-unixware*)
-		os=-sysv4.2uw
-		;;
-	-gnu/linux*)
-		os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
-		;;
-	# es1800 is here to avoid being matched by es* (a different OS)
-	-es1800*)
-		os=-ose
-		;;
-	# Now accept the basic system types.
-	# The portable systems comes first.
-	# Each alternative MUST end in a * to match a version number.
-	# -sysv* is not here because it comes later, after sysvr4.
-	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
-	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
-	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
-	      | -sym* | -kopensolaris* | -plan9* \
-	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
-	      | -aos* | -aros* | -cloudabi* | -sortix* \
-	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
-	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
-	      | -hiux* | -knetbsd* | -mirbsd* | -netbsd* \
-	      | -bitrig* | -openbsd* | -solidbsd* | -libertybsd* \
-	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
-	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
-	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
-	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* | -hcos* \
-	      | -chorusos* | -chorusrdb* | -cegcc* | -glidix* \
-	      | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-	      | -midipix* | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \
-	      | -linux-newlib* | -linux-musl* | -linux-uclibc* \
-	      | -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \
-	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* \
-	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
-	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
-	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
-	      | -morphos* | -superux* | -rtmk* | -windiss* \
-	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
-	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* \
-	      | -onefs* | -tirtos* | -phoenix* | -fuchsia* | -redox* | -bme* \
-	      | -midnightbsd*)
-	# Remember, each alternative MUST END IN *, to match a version number.
-		;;
-	-qnx*)
-		case $basic_machine in
-		    x86-* | i*86-*)
-			;;
-		    *)
-			os=-nto$os
-			;;
-		esac
-		;;
-	-nto-qnx*)
-		;;
-	-nto*)
-		os=`echo $os | sed -e 's|nto|nto-qnx|'`
-		;;
-	-sim | -xray | -os68k* | -v88r* \
-	      | -windows* | -osx | -abug | -netware* | -os9* \
-	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
-		;;
-	-mac*)
-		os=`echo "$os" | sed -e 's|mac|macos|'`
-		;;
-	-linux-dietlibc)
-		os=-linux-dietlibc
-		;;
-	-linux*)
-		os=`echo $os | sed -e 's|linux|linux-gnu|'`
-		;;
-	-sunos5*)
-		os=`echo "$os" | sed -e 's|sunos5|solaris2|'`
-		;;
-	-sunos6*)
-		os=`echo "$os" | sed -e 's|sunos6|solaris3|'`
-		;;
-	-opened*)
-		os=-openedition
-		;;
-	-os400*)
-		os=-os400
-		;;
-	-wince*)
-		os=-wince
-		;;
-	-utek*)
-		os=-bsd
-		;;
-	-dynix*)
-		os=-bsd
-		;;
-	-acis*)
-		os=-aos
-		;;
-	-atheos*)
-		os=-atheos
-		;;
-	-syllable*)
-		os=-syllable
-		;;
-	-386bsd)
-		os=-bsd
-		;;
-	-ctix* | -uts*)
-		os=-sysv
-		;;
-	-nova*)
-		os=-rtmk-nova
-		;;
-	-ns2)
-		os=-nextstep2
-		;;
-	-nsk*)
-		os=-nsk
-		;;
-	# Preserve the version number of sinix5.
-	-sinix5.*)
-		os=`echo $os | sed -e 's|sinix|sysv|'`
-		;;
-	-sinix*)
-		os=-sysv4
-		;;
-	-tpf*)
-		os=-tpf
-		;;
-	-triton*)
-		os=-sysv3
-		;;
-	-oss*)
-		os=-sysv3
-		;;
-	-svr4*)
-		os=-sysv4
-		;;
-	-svr3)
-		os=-sysv3
-		;;
-	-sysvr4)
-		os=-sysv4
-		;;
-	# This must come after -sysvr4.
-	-sysv*)
-		;;
-	-ose*)
-		os=-ose
-		;;
-	-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
-		os=-mint
-		;;
-	-zvmoe)
-		os=-zvmoe
-		;;
-	-dicos*)
-		os=-dicos
-		;;
-	-pikeos*)
-		# Until real need of OS specific support for
-		# particular features comes up, bare metal
-		# configurations are quite functional.
-		case $basic_machine in
-		    arm*)
-			os=-eabi
-			;;
-		    *)
-			os=-elf
-			;;
-		esac
-		;;
-	-nacl*)
-		;;
-	-ios)
-		;;
-	-none)
-		;;
-	-*-eabi)
-		case $basic_machine in
-		    arm*)
-			;;
-		esac
-		;;
-	*)
-		# Get rid of the `-' at the beginning of $os.
-		os=`echo $os | sed 's/[^-]*-//'`
-		echo Invalid configuration \`"$1"\': system \`"$os"\' not recognized 1>&2
-		exit 1
-		;;
-esac
-else
-
-# Here we handle the default operating systems that come with various machines.
-# The value should be what the vendor currently ships out the door with their
-# machine or put another way, the most popular os provided with the machine.
-
-# Note that if you're going to try to match "-MANUFACTURER" here (say,
-# "-sun"), then you have to tell the case statement up towards the top
-# that MANUFACTURER isn't an operating system.  Otherwise, code above
-# will signal an error saying that MANUFACTURER isn't an operating
-# system, and we'll never get to this point.
-
-case $basic_machine in
-	score-*)
-		os=-elf
-		;;
-	spu-*)
-		os=-elf
-		;;
-	*-acorn)
-		os=-riscix1.2
-		;;
-	arm*-rebel)
-		os=-linux
-		;;
-	arm*-semi)
-		os=-aout
-		;;
-	c4x-* | tic4x-*)
-		os=-coff
-		;;
-	c8051-*)
-		os=-elf
-		;;
-	hexagon-*)
-		os=-elf
-		;;
-	tic54x-*)
-		os=-coff
-		;;
-	tic55x-*)
-		os=-coff
-		;;
-	tic6x-*)
-		os=-coff
-		;;
-	# This must come before the *-dec entry.
-	pdp10-*)
-		os=-tops20
-		;;
-	pdp11-*)
-		os=-none
-		;;
-	*-dec | vax-*)
-		os=-ultrix4.2
-		;;
-	m68*-apollo)
-		os=-domain
-		;;
-	i386-sun)
-		os=-sunos4.0.2
-		;;
-	m68000-sun)
-		os=-sunos3
-		;;
-	m68*-cisco)
-		os=-aout
-		;;
-	mep-*)
-		os=-elf
-		;;
-	mips*-cisco)
-		os=-elf
-		;;
-	mips*-*)
-		os=-elf
-		;;
-	or32-*)
-		os=-coff
-		;;
-	*-tti)	# must be before sparc entry or we get the wrong os.
-		os=-sysv3
-		;;
-	sparc-* | *-sun)
-		os=-sunos4.1.1
-		;;
-	pru-*)
-		os=-elf
-		;;
-	*-be)
-		os=-beos
-		;;
-	*-ibm)
-		os=-aix
-		;;
-	*-knuth)
-		os=-mmixware
-		;;
-	*-wec)
-		os=-proelf
-		;;
-	*-winbond)
-		os=-proelf
-		;;
-	*-oki)
-		os=-proelf
-		;;
-	*-hp)
-		os=-hpux
-		;;
-	*-hitachi)
-		os=-hiux
-		;;
-	i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
-		os=-sysv
-		;;
-	*-cbm)
-		os=-amigaos
-		;;
-	*-dg)
-		os=-dgux
-		;;
-	*-dolphin)
-		os=-sysv3
-		;;
-	m68k-ccur)
-		os=-rtu
-		;;
-	m88k-omron*)
-		os=-luna
-		;;
-	*-next)
-		os=-nextstep
-		;;
-	*-sequent)
-		os=-ptx
-		;;
-	*-crds)
-		os=-unos
-		;;
-	*-ns)
-		os=-genix
-		;;
-	i370-*)
-		os=-mvs
-		;;
-	*-gould)
-		os=-sysv
-		;;
-	*-highlevel)
-		os=-bsd
-		;;
-	*-encore)
-		os=-bsd
-		;;
-	*-sgi)
-		os=-irix
-		;;
-	*-siemens)
-		os=-sysv4
-		;;
-	*-masscomp)
-		os=-rtu
-		;;
-	f30[01]-fujitsu | f700-fujitsu)
-		os=-uxpv
-		;;
-	*-rom68k)
-		os=-coff
-		;;
-	*-*bug)
-		os=-coff
-		;;
-	*-apple)
-		os=-macos
-		;;
-	*-atari*)
-		os=-mint
-		;;
-	*)
-		os=-none
-		;;
-esac
-fi
-
-# Here we handle the case where we know the os, and the CPU type, but not the
-# manufacturer.  We pick the logical manufacturer.
-vendor=unknown
-case $basic_machine in
-	*-unknown)
-		case $os in
-			-riscix*)
-				vendor=acorn
-				;;
-			-sunos*)
-				vendor=sun
-				;;
-			-cnk*|-aix*)
-				vendor=ibm
-				;;
-			-beos*)
-				vendor=be
-				;;
-			-hpux*)
-				vendor=hp
-				;;
-			-mpeix*)
-				vendor=hp
-				;;
-			-hiux*)
-				vendor=hitachi
-				;;
-			-unos*)
-				vendor=crds
-				;;
-			-dgux*)
-				vendor=dg
-				;;
-			-luna*)
-				vendor=omron
-				;;
-			-genix*)
-				vendor=ns
-				;;
-			-mvs* | -opened*)
-				vendor=ibm
-				;;
-			-os400*)
-				vendor=ibm
-				;;
-			-ptx*)
-				vendor=sequent
-				;;
-			-tpf*)
-				vendor=ibm
-				;;
-			-vxsim* | -vxworks* | -windiss*)
-				vendor=wrs
-				;;
-			-aux*)
-				vendor=apple
-				;;
-			-hms*)
-				vendor=hitachi
-				;;
-			-mpw* | -macos*)
-				vendor=apple
-				;;
-			-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
-				vendor=atari
-				;;
-			-vos*)
-				vendor=stratus
-				;;
-		esac
-		basic_machine=`echo "$basic_machine" | sed "s/unknown/$vendor/"`
-		;;
-esac
-
-echo "$basic_machine$os"
-exit
-
-# Local variables:
-# eval: (add-hook 'before-save-hook 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
diff --git c/libcody/build-aux/install-sh w/libcody/build-aux/install-sh
deleted file mode 100755
index 8175c640fe6..00000000000
--- c/libcody/build-aux/install-sh
+++ /dev/null
@@ -1,518 +0,0 @@
-#!/bin/sh
-# install - install a program, script, or datafile
-
-scriptversion=2018-03-11.20; # UTC
-
-# This originates from X11R5 (mit/util/scripts/install.sh), which was
-# later released in X11R6 (xc/config/util/install.sh) with the
-# following copyright and license.
-#
-# Copyright (C) 1994 X Consortium
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to
-# deal in the Software without restriction, including without limitation the
-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# sell copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-#
-# Except as contained in this notice, the name of the X Consortium shall not
-# be used in advertising or otherwise to promote the sale, use or other deal-
-# ings in this Software without prior written authorization from the X Consor-
-# tium.
-#
-#
-# FSF changes to this file are in the public domain.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# 'make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.
-
-tab='	'
-nl='
-'
-IFS=" $tab$nl"
-
-# Set DOITPROG to "echo" to test this script.
-
-doit=${DOITPROG-}
-doit_exec=${doit:-exec}
-
-# Put in absolute file names if you don't have them in your path;
-# or use environment vars.
-
-chgrpprog=${CHGRPPROG-chgrp}
-chmodprog=${CHMODPROG-chmod}
-chownprog=${CHOWNPROG-chown}
-cmpprog=${CMPPROG-cmp}
-cpprog=${CPPROG-cp}
-mkdirprog=${MKDIRPROG-mkdir}
-mvprog=${MVPROG-mv}
-rmprog=${RMPROG-rm}
-stripprog=${STRIPPROG-strip}
-
-posix_mkdir=
-
-# Desired mode of installed file.
-mode=0755
-
-chgrpcmd=
-chmodcmd=$chmodprog
-chowncmd=
-mvcmd=$mvprog
-rmcmd="$rmprog -f"
-stripcmd=
-
-src=
-dst=
-dir_arg=
-dst_arg=
-
-copy_on_change=false
-is_target_a_directory=possibly
-
-usage="\
-Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
-   or: $0 [OPTION]... SRCFILES... DIRECTORY
-   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
-   or: $0 [OPTION]... -d DIRECTORIES...
-
-In the 1st form, copy SRCFILE to DSTFILE.
-In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
-In the 4th, create DIRECTORIES.
-
-Options:
-     --help     display this help and exit.
-     --version  display version info and exit.
-
-  -c            (ignored)
-  -C            install only if different (preserve the last data modification time)
-  -d            create directories instead of installing files.
-  -g GROUP      $chgrpprog installed files to GROUP.
-  -m MODE       $chmodprog installed files to MODE.
-  -o USER       $chownprog installed files to USER.
-  -s            $stripprog installed files.
-  -t DIRECTORY  install into DIRECTORY.
-  -T            report an error if DSTFILE is a directory.
-
-Environment variables override the default commands:
-  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
-  RMPROG STRIPPROG
-"
-
-while test $# -ne 0; do
-  case $1 in
-    -c) ;;
-
-    -C) copy_on_change=true;;
-
-    -d) dir_arg=true;;
-
-    -g) chgrpcmd="$chgrpprog $2"
-        shift;;
-
-    --help) echo "$usage"; exit $?;;
-
-    -m) mode=$2
-        case $mode in
-          *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
-            echo "$0: invalid mode: $mode" >&2
-            exit 1;;
-        esac
-        shift;;
-
-    -o) chowncmd="$chownprog $2"
-        shift;;
-
-    -s) stripcmd=$stripprog;;
-
-    -t)
-        is_target_a_directory=always
-        dst_arg=$2
-        # Protect names problematic for 'test' and other utilities.
-        case $dst_arg in
-          -* | [=\(\)!]) dst_arg=./$dst_arg;;
-        esac
-        shift;;
-
-    -T) is_target_a_directory=never;;
-
-    --version) echo "$0 $scriptversion"; exit $?;;
-
-    --) shift
-        break;;
-
-    -*) echo "$0: invalid option: $1" >&2
-        exit 1;;
-
-    *)  break;;
-  esac
-  shift
-done
-
-# We allow the use of options -d and -T together, by making -d
-# take the precedence; this is for compatibility with GNU install.
-
-if test -n "$dir_arg"; then
-  if test -n "$dst_arg"; then
-    echo "$0: target directory not allowed when installing a directory." >&2
-    exit 1
-  fi
-fi
-
-if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
-  # When -d is used, all remaining arguments are directories to create.
-  # When -t is used, the destination is already specified.
-  # Otherwise, the last argument is the destination.  Remove it from $@.
-  for arg
-  do
-    if test -n "$dst_arg"; then
-      # $@ is not empty: it contains at least $arg.
-      set fnord "$@" "$dst_arg"
-      shift # fnord
-    fi
-    shift # arg
-    dst_arg=$arg
-    # Protect names problematic for 'test' and other utilities.
-    case $dst_arg in
-      -* | [=\(\)!]) dst_arg=./$dst_arg;;
-    esac
-  done
-fi
-
-if test $# -eq 0; then
-  if test -z "$dir_arg"; then
-    echo "$0: no input file specified." >&2
-    exit 1
-  fi
-  # It's OK to call 'install-sh -d' without argument.
-  # This can happen when creating conditional directories.
-  exit 0
-fi
-
-if test -z "$dir_arg"; then
-  if test $# -gt 1 || test "$is_target_a_directory" = always; then
-    if test ! -d "$dst_arg"; then
-      echo "$0: $dst_arg: Is not a directory." >&2
-      exit 1
-    fi
-  fi
-fi
-
-if test -z "$dir_arg"; then
-  do_exit='(exit $ret); exit $ret'
-  trap "ret=129; $do_exit" 1
-  trap "ret=130; $do_exit" 2
-  trap "ret=141; $do_exit" 13
-  trap "ret=143; $do_exit" 15
-
-  # Set umask so as not to create temps with too-generous modes.
-  # However, 'strip' requires both read and write access to temps.
-  case $mode in
-    # Optimize common cases.
-    *644) cp_umask=133;;
-    *755) cp_umask=22;;
-
-    *[0-7])
-      if test -z "$stripcmd"; then
-        u_plus_rw=
-      else
-        u_plus_rw='% 200'
-      fi
-      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
-    *)
-      if test -z "$stripcmd"; then
-        u_plus_rw=
-      else
-        u_plus_rw=,u+rw
-      fi
-      cp_umask=$mode$u_plus_rw;;
-  esac
-fi
-
-for src
-do
-  # Protect names problematic for 'test' and other utilities.
-  case $src in
-    -* | [=\(\)!]) src=./$src;;
-  esac
-
-  if test -n "$dir_arg"; then
-    dst=$src
-    dstdir=$dst
-    test -d "$dstdir"
-    dstdir_status=$?
-  else
-
-    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
-    # might cause directories to be created, which would be especially bad
-    # if $src (and thus $dsttmp) contains '*'.
-    if test ! -f "$src" && test ! -d "$src"; then
-      echo "$0: $src does not exist." >&2
-      exit 1
-    fi
-
-    if test -z "$dst_arg"; then
-      echo "$0: no destination specified." >&2
-      exit 1
-    fi
-    dst=$dst_arg
-
-    # If destination is a directory, append the input filename.
-    if test -d "$dst"; then
-      if test "$is_target_a_directory" = never; then
-        echo "$0: $dst_arg: Is a directory" >&2
-        exit 1
-      fi
-      dstdir=$dst
-      dstbase=`basename "$src"`
-      case $dst in
-	*/) dst=$dst$dstbase;;
-	*)  dst=$dst/$dstbase;;
-      esac
-      dstdir_status=0
-    else
-      dstdir=`dirname "$dst"`
-      test -d "$dstdir"
-      dstdir_status=$?
-    fi
-  fi
-
-  case $dstdir in
-    */) dstdirslash=$dstdir;;
-    *)  dstdirslash=$dstdir/;;
-  esac
-
-  obsolete_mkdir_used=false
-
-  if test $dstdir_status != 0; then
-    case $posix_mkdir in
-      '')
-        # Create intermediate dirs using mode 755 as modified by the umask.
-        # This is like FreeBSD 'install' as of 1997-10-28.
-        umask=`umask`
-        case $stripcmd.$umask in
-          # Optimize common cases.
-          *[2367][2367]) mkdir_umask=$umask;;
-          .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
-
-          *[0-7])
-            mkdir_umask=`expr $umask + 22 \
-              - $umask % 100 % 40 + $umask % 20 \
-              - $umask % 10 % 4 + $umask % 2
-            `;;
-          *) mkdir_umask=$umask,go-w;;
-        esac
-
-        # With -d, create the new directory with the user-specified mode.
-        # Otherwise, rely on $mkdir_umask.
-        if test -n "$dir_arg"; then
-          mkdir_mode=-m$mode
-        else
-          mkdir_mode=
-        fi
-
-        posix_mkdir=false
-        case $umask in
-          *[123567][0-7][0-7])
-            # POSIX mkdir -p sets u+wx bits regardless of umask, which
-            # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
-            ;;
-          *)
-            # Note that $RANDOM variable is not portable (e.g. dash);  Use it
-            # here however when possible just to lower collision chance.
-            tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
-
-            trap 'ret=$?; rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null; exit $ret' 0
-
-            # Because "mkdir -p" follows existing symlinks and we likely work
-            # directly in world-writeable /tmp, make sure that the '$tmpdir'
-            # directory is successfully created first before we actually test
-            # 'mkdir -p' feature.
-            if (umask $mkdir_umask &&
-                $mkdirprog $mkdir_mode "$tmpdir" &&
-                exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1
-            then
-              if test -z "$dir_arg" || {
-                   # Check for POSIX incompatibilities with -m.
-                   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
-                   # other-writable bit of parent directory when it shouldn't.
-                   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
-                   test_tmpdir="$tmpdir/a"
-                   ls_ld_tmpdir=`ls -ld "$test_tmpdir"`
-                   case $ls_ld_tmpdir in
-                     d????-?r-*) different_mode=700;;
-                     d????-?--*) different_mode=755;;
-                     *) false;;
-                   esac &&
-                   $mkdirprog -m$different_mode -p -- "$test_tmpdir" && {
-                     ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"`
-                     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
-                   }
-                 }
-              then posix_mkdir=:
-              fi
-              rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir"
-            else
-              # Remove any dirs left behind by ancient mkdir implementations.
-              rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null
-            fi
-            trap '' 0;;
-        esac;;
-    esac
-
-    if
-      $posix_mkdir && (
-        umask $mkdir_umask &&
-        $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
-      )
-    then :
-    else
-
-      # The umask is ridiculous, or mkdir does not conform to POSIX,
-      # or it failed possibly due to a race condition.  Create the
-      # directory the slow way, step by step, checking for races as we go.
-
-      case $dstdir in
-        /*) prefix='/';;
-        [-=\(\)!]*) prefix='./';;
-        *)  prefix='';;
-      esac
-
-      oIFS=$IFS
-      IFS=/
-      set -f
-      set fnord $dstdir
-      shift
-      set +f
-      IFS=$oIFS
-
-      prefixes=
-
-      for d
-      do
-        test X"$d" = X && continue
-
-        prefix=$prefix$d
-        if test -d "$prefix"; then
-          prefixes=
-        else
-          if $posix_mkdir; then
-            (umask=$mkdir_umask &&
-             $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
-            # Don't fail if two instances are running concurrently.
-            test -d "$prefix" || exit 1
-          else
-            case $prefix in
-              *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
-              *) qprefix=$prefix;;
-            esac
-            prefixes="$prefixes '$qprefix'"
-          fi
-        fi
-        prefix=$prefix/
-      done
-
-      if test -n "$prefixes"; then
-        # Don't fail if two instances are running concurrently.
-        (umask $mkdir_umask &&
-         eval "\$doit_exec \$mkdirprog $prefixes") ||
-          test -d "$dstdir" || exit 1
-        obsolete_mkdir_used=true
-      fi
-    fi
-  fi
-
-  if test -n "$dir_arg"; then
-    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
-    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
-    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
-      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
-  else
-
-    # Make a couple of temp file names in the proper directory.
-    dsttmp=${dstdirslash}_inst.$$_
-    rmtmp=${dstdirslash}_rm.$$_
-
-    # Trap to clean up those temp files at exit.
-    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
-
-    # Copy the file name to the temp name.
-    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
-
-    # and set any options; do chmod last to preserve setuid bits.
-    #
-    # If any of these fail, we abort the whole thing.  If we want to
-    # ignore errors from any of these, just make sure not to ignore
-    # errors from the above "$doit $cpprog $src $dsttmp" command.
-    #
-    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
-    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
-    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
-    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
-
-    # If -C, don't bother to copy if it wouldn't change the file.
-    if $copy_on_change &&
-       old=`LC_ALL=C ls -dlL "$dst"     2>/dev/null` &&
-       new=`LC_ALL=C ls -dlL "$dsttmp"  2>/dev/null` &&
-       set -f &&
-       set X $old && old=:$2:$4:$5:$6 &&
-       set X $new && new=:$2:$4:$5:$6 &&
-       set +f &&
-       test "$old" = "$new" &&
-       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
-    then
-      rm -f "$dsttmp"
-    else
-      # Rename the file to the real destination.
-      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
-
-      # The rename failed, perhaps because mv can't rename something else
-      # to itself, or perhaps because mv is so ancient that it does not
-      # support -f.
-      {
-        # Now remove or move aside any old file at destination location.
-        # We try this two ways since rm can't unlink itself on some
-        # systems and the destination file might be busy for other
-        # reasons.  In this case, the final cleanup might fail but the new
-        # file should still install successfully.
-        {
-          test ! -f "$dst" ||
-          $doit $rmcmd -f "$dst" 2>/dev/null ||
-          { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
-            { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
-          } ||
-          { echo "$0: cannot unlink or rename $dst" >&2
-            (exit 1); exit 1
-          }
-        } &&
-
-        # Now rename the file to the real destination.
-        $doit $mvcmd "$dsttmp" "$dst"
-      }
-    fi || exit 1
-
-    trap '' 0
-  fi
-done
-
-# Local variables:
-# eval: (add-hook 'before-save-hook 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC0"
-# time-stamp-end: "; # UTC"
-# End:
diff --git c/libcody/config.h.in w/libcody/config.h.in
index 85425472a16..6330033df2d 100644
--- c/libcody/config.h.in
+++ w/libcody/config.h.in
@@ -1,9 +1,6 @@
 /* config.h.in.  Generated from configure.ac by autoheader.  */
 
-/* Bug reporting location */
-#undef BUGURL
-
-/* Enable checking */
+/* Define to 1 if you want more run-time sanity checks. */
 #undef NMS_CHECKING
 
 /* Define to the address where bug reports for this package should be sent. */
diff --git c/libcody/config.m4 w/libcody/config.m4
index ce5e84d0278..37b5811fe75 100644
--- c/libcody/config.m4
+++ w/libcody/config.m4
@@ -4,53 +4,6 @@
 
 # Note: VAR+=... is not dashing, despite its looks
 
-AC_DEFUN([NMS_NOT_IN_SOURCE],
-[if test -e configure ; then
-AC_MSG_ERROR([Do not build in the source tree.  Reasons])
-fi])
-
-# thanks to Zack Weinberg for fixing this!
-AC_DEFUN([NMS_TOOLS],
-[AC_SUBST([tools], [])
-AC_ARG_WITH([tools],
-  AS_HELP_STRING([--with-tools=DIR],[tool directory]),
-  [AS_CASE([$withval],
-    [yes], [AC_MSG_ERROR([--with-tools requires an argument])],
-    [no], [:],
-    [tools="${withval%/bin}"])])
-
-if test -n "$tools" ; then
-  if test -d "$tools/bin"; then
-    PATH="$tools/bin:$PATH"
-    AC_MSG_NOTICE([Using tools in $tools])
-  else
-    AC_MSG_ERROR([tool location does not exist])
-  fi
-fi])
-
-AC_DEFUN([NMS_TOOL_DIRS],
-[if test "$tools" && test -d "$tools/include" ; then
-  CXX="$CXX -I$tools/include"
-fi
-if test "$tools" && test -d "$tools/lib" ; then
-  toollib="$tools/lib"
-  if os=$(CXX -print-multi-os-directory 2>/dev/null) ; then
-    toollib="$toollib/${os}"
-  fi
-  LDFLAGS="$LDFLAGS -L $toollib"
-  unset toollib
-fi])
-
-AC_DEFUN([NMS_NUM_CPUS],
-[AC_MSG_CHECKING([number of CPUs])
-AS_CASE([$build],
-[*-*-darwin*], [NUM_CPUS=$(sysctl -n hw.ncpu 2>/dev/null)],
-[NUM_CPUS=$(grep -c '^processor' /proc/cpuinfo 2>/dev/null)])
-test "$NUM_CPUS" = 0 && NUM_CPUS=
-AC_MSG_RESULT([${NUM_CPUS:-unknown}])
-test "$NUM_CPUS" = 1 && NUM_CPUS=
-AC_SUBST(NUM_CPUS)])
-
 AC_DEFUN([NMS_MAINTAINER_MODE],
 [AC_ARG_ENABLE([maintainer-mode],
 AS_HELP_STRING([--enable-maintainer-mode],
@@ -105,56 +58,6 @@ AC_MSG_RESULT([no])
 AC_MSG_ERROR([C++11 is required])]))
 unset CXX_ORIG])])
 
-AC_DEFUN([NMS_CXX_20],
-[AC_MSG_CHECKING([whether $CXX is for C++20])
-AC_COMPILE_IFELSE([AC_LANG_PROGRAM([
-[#if __cplusplus <= 201703
-#error "C++20 is required"
-#endif
-]])],
-[AC_MSG_RESULT([yes])],
-[CXX="$CXX -std=c++20"
-AC_COMPILE_IFELSE([AC_LANG_PROGRAM([
-[#if __cplusplus <= 201703
-#error "C++20 is required"
-#endif
-]])],
-AC_MSG_RESULT([adding -std=c++20]),
-AC_MSG_RESULT([no])
-AC_MSG_ERROR([C++20 is required])]))
-
-AC_MSG_CHECKING([whether C++20 support is sufficiently advanced])
-AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
-#include <version>
-// There doesn't seem to be a feature macro for __VA_OPT__ :(
-#define VARIADIC(X,...) X __VA_OPT__((__VA_ARGS__))
-#define X(Y,Z) 1
-int ary[VARIADIC(X,Y,Z)];
-#if  __cpp_constinit < 201907
-#error "C++20 constinit required"
-cpp_constinit is __cpp_constinit
-#endif
-#if  __cpp_if_constexpr < 201606
-#error "C++20 constexpr required"
-cpp_constexpr is __cpp_if_constexpr
-#endif
-#if  __cpp_concepts < 201907
-#error "C++20 concepts required"
-cpp_concepts is __cpp_concepts
-#endif
-#if __cpp_structured_bindings < 201606
-#error "C++20 structured bindings required"
-cpp_structured_bindings is __cpp_structured_bindings
-#endif
-#if __cpp_lib_int_pow2 < 202002
-#error "std::has_single_bit required"
-cpp_lib_int_pow2 is __cpp_lib_int_pow2
-#endif
-]])],
-AC_MSG_RESULT([yes 🙂]),
-AC_MSG_RESULT([no 🙁])
-AC_MSG_ERROR([C++20 support is too immature]))])
-
 AC_DEFUN([NMS_ENABLE_EXCEPTIONS],
 [AC_ARG_ENABLE([exceptions],
 AS_HELP_STRING([--enable-exceptions],
@@ -181,30 +84,6 @@ AC_LINK_IFELSE([AC_LANG_PROGRAM([])],
 AC_MSG_RESULT([no])])
 unset ORIG_LDFLAGS])
 
-AC_DEFUN([NMS_BUGURL],
-[AC_MSG_CHECKING([bugurl])
-AC_ARG_WITH(bugurl,
-AS_HELP_STRING([--with-bugurl=URL],[where to report bugs]),
-AS_CASE(["$withval"],
-  [yes], [AC_MSG_ERROR([--with-bugurl requires an argument])],
-  [no], [BUGURL=""],
-  [BUGURL="${withval}"]),
-[BUGURL="${PACKAGE_BUGREPORT}"])
-AC_MSG_RESULT($BUGURL)
-AC_DEFINE_UNQUOTED(BUGURL,"$BUGURL",[Bug reporting location])])
-
-AC_DEFUN([NMS_DISTRIBUTION],
-[AC_ARG_ENABLE([distribution],
-AS_HELP_STRING([--enable-distribution],
-[enable distribution.  Inhibit components that prevent distribution]),,
-[enable_distribution="no"])
-AS_CASE([$enable_distribution],
-  [yes], [nms_distribution=yes],
-  [no], [nms_distribution=no],
-  [AC_MSG_ERROR([unknown distribution $enable_distribution])])
-AC_MSG_CHECKING([distribution])
-AC_MSG_RESULT([$nms_distribution])])
-
 AC_DEFUN([NMS_ENABLE_CHECKING],
 [AC_ARG_ENABLE([checking],
 AS_HELP_STRING([--enable-checking],
@@ -219,64 +98,3 @@ AC_MSG_RESULT([${nms_checking:-no}])
 if test "$nms_checking" = yes ; then
   AC_DEFINE_UNQUOTED([NMS_CHECKING], [0${nms_checking:+1}], [Enable checking])
 fi])
-
-AC_DEFUN([NMS_WITH_BINUTILS],
-[AC_MSG_CHECKING([binutils])
-AC_ARG_WITH(bfd,
-AS_HELP_STRING([--with-bfd=DIR], [location of libbfd]),
-if test "$withval" = "yes" ; then
-  AC_MSG_ERROR([DIR not specified])
-elif test "$withval" = "no" ; then
-  AC_MSG_RESULT(installed)
-else
-  AC_MSG_RESULT(${withval})
-  CPPFLAGS="$CPPFLAGS -I${withval}/include"
-  LDFLAGS="$LDFLAGS -L${withval}/lib"
-fi,
-AC_MSG_RESULT(installed))])
-
-AC_DEFUN([NMS_ENABLE_BACKTRACE],
-[AC_REQUIRE([NMS_DISTRIBUTION])
-AC_ARG_ENABLE([backtrace],
-AS_HELP_STRING([--enable-backtrace],[provide backtrace on fatality.]),,
-[enable_backtrace="maybe"])
-if test "${enable_backtrace:-maybe}" != no ; then
-  AC_CHECK_HEADERS(execinfo.h)
-  AC_CHECK_FUNCS(backtrace)
-  if test "$nms_distribution" = no ; then
-    AC_DEFINE([HAVE_DECL_BASENAME], [1], [Needed for demangle.h])
-    # libiberty prevents distribution because of licensing
-    AC_CHECK_HEADERS([demangle.h libiberty/demangle.h],[break])
-    # libbfd prevents distribution because of licensing
-    AC_CHECK_HEADERS([bfd.h])
-    AC_SEARCH_LIBS([bfd_openr],[bfd],[LIBS="$LIBS -lz -liberty -ldl"],,[-lz -liberty -ldl])
-  fi
-  if test "$ac_cv_func_backtrace" = yes ; then
-    nms_backtrace=yes
-    ldbacktrace=-rdynamic
-    AC_DEFINE([NMS_BACKTRACE], [1], [Enable backtrace])
-  elif test "$enable_backtrace" = yes ; then
-    AC_MSG_ERROR([Backtrace unavailable])
-  fi
-  AC_SUBST([ldbacktrace])
-fi
-AC_MSG_CHECKING([backtrace])
-AC_MSG_RESULT([${nms_backtrace:-no}])])
-
-AC_DEFUN([NMS_CONFIG_FILES],
-[CONFIG_FILES="Makefile $1"
-SUBDIRS="$2"
-for generated in config.h.in configure ; do
-  if test $srcdir/configure.ac -nt $srcdir/$generated ; then
-    touch $srcdir/$generated
-  fi
-done
-for dir in . $SUBDIRS
-do
-  CONFIG_FILES="$CONFIG_FILES $dir/Makesub"
-  test -f ${srcdir}/$dir/tests/Makesub.in && CONFIG_FILES="$CONFIG_FILES $dir/tests/Makesub"
-done
-AC_CONFIG_FILES([$CONFIG_FILES])
-AC_SUBST(configure_args,[$ac_configure_args])
-AC_SUBST(SUBDIRS)
-AC_SUBST(CONFIG_FILES)])
diff --git c/libcody/configure w/libcody/configure
index af3a3074a35..da52a5cfca5 100755
--- c/libcody/configure
+++ w/libcody/configure
@@ -587,15 +587,11 @@ PACKAGE_URL=''
 ac_unique_file="cody.hh"
 ac_subst_vars='LTLIBOBJS
 LIBOBJS
-ALOY
-DOXYGEN
+configure_args
 AR
 RANLIB
 EXCEPTIONS
 PICFLAG
-CONFIG_FILES
-SUBDIRS
-configure_args
 OBJEXT
 EXEEXT
 ac_ct_CXX
@@ -604,8 +600,6 @@ LDFLAGS
 CXXFLAGS
 CXX
 MAINTAINER
-NUM_CPUS
-tools
 host_os
 host_vendor
 host_cpu
@@ -655,10 +649,8 @@ SHELL'
 ac_subst_files=''
 ac_user_opts='
 enable_option_checking
-with_tools
 enable_maintainer_mode
 with_compiler
-with_bugurl
 enable_checking
 enable_host_shared
 enable_exceptions
@@ -1299,9 +1291,7 @@ Optional Features:
 Optional Packages:
   --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
   --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --with-tools=DIR        tool directory
   --with-compiler=NAME    which compiler to use
-  --with-bugurl=URL       where to report bugs
 
 Some influential environment variables:
   CXX         C++ compiler command
@@ -1836,27 +1826,6 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
 
-# thanks to Zack Weinberg for fixing this!
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
 
 
 
@@ -1869,7 +1838,7 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
 ac_aux_dir=
-for ac_dir in build-aux "$srcdir"/build-aux; do
+for ac_dir in .. "$srcdir"/..; do
   if test -f "$ac_dir/install-sh"; then
     ac_aux_dir=$ac_dir
     ac_install_sh="$ac_aux_dir/install-sh -c"
@@ -1885,7 +1854,7 @@ for ac_dir in build-aux "$srcdir"/build-aux; do
   fi
 done
 if test -z "$ac_aux_dir"; then
-  as_fn_error $? "cannot find install-sh, install.sh, or shtool in build-aux \"$srcdir\"/build-aux" "$LINENO" 5
+  as_fn_error $? "cannot find install-sh, install.sh, or shtool in .. \"$srcdir\"/.." "$LINENO" 5
 fi
 
 # These three variables are undocumented and unsupported,
@@ -1899,9 +1868,6 @@ ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
 
 
 
-if test -e configure ; then
-as_fn_error $? "Do not build in the source tree.  Reasons" "$LINENO" 5
-fi
 # Make sure we can run config.sub.
 $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
   as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
@@ -1974,43 +1940,6 @@ case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
 
 
 
-
-
-# Check whether --with-tools was given.
-if test "${with_tools+set}" = set; then :
-  withval=$with_tools; case $withval in #(
-  yes) :
-    as_fn_error $? "--with-tools requires an argument" "$LINENO" 5 ;; #(
-  no) :
-    : ;; #(
-  *) :
-    tools="${withval%/bin}" ;;
-esac
-fi
-
-
-if test -n "$tools" ; then
-  if test -d "$tools/bin"; then
-    PATH="$tools/bin:$PATH"
-    { $as_echo "$as_me:${as_lineno-$LINENO}: Using tools in $tools" >&5
-$as_echo "$as_me: Using tools in $tools" >&6;}
-  else
-    as_fn_error $? "tool location does not exist" "$LINENO" 5
-  fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking number of CPUs" >&5
-$as_echo_n "checking number of CPUs... " >&6; }
-case $build in #(
-  *-*-darwin*) :
-    NUM_CPUS=$(sysctl -n hw.ncpu 2>/dev/null) ;; #(
-  *) :
-    NUM_CPUS=$(grep -c '^processor' /proc/cpuinfo 2>/dev/null) ;;
-esac
-test "$NUM_CPUS" = 0 && NUM_CPUS=
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${NUM_CPUS:-unknown}" >&5
-$as_echo "${NUM_CPUS:-unknown}" >&6; }
-test "$NUM_CPUS" = 1 && NUM_CPUS=
-
 # Check whether --enable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then :
   enableval=$enable_maintainer_mode;
@@ -2634,17 +2563,6 @@ rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 unset CXX_ORIG
 fi
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-if test "$tools" && test -d "$tools/include" ; then
-  CXX="$CXX -I$tools/include"
-fi
-if test "$tools" && test -d "$tools/lib" ; then
-  toollib="$tools/lib"
-  if os=$(CXX -print-multi-os-directory 2>/dev/null) ; then
-    toollib="$toollib/${os}"
-  fi
-  LDFLAGS="$LDFLAGS -L $toollib"
-  unset toollib
-fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking adding -Wl,--no-undefined to linker" >&5
 $as_echo_n "checking adding -Wl,--no-undefined to linker... " >&6; }
 ORIG_LDFLAGS="$LDFLAGS"
@@ -2671,24 +2589,6 @@ fi
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
 unset ORIG_LDFLAGS
-CONFIG_FILES="Makefile gdbinit dox.cfg"
-SUBDIRS=""
-for generated in config.h.in configure ; do
-  if test $srcdir/configure.ac -nt $srcdir/$generated ; then
-    touch $srcdir/$generated
-  fi
-done
-for dir in . $SUBDIRS
-do
-  CONFIG_FILES="$CONFIG_FILES $dir/Makesub"
-  test -f ${srcdir}/$dir/tests/Makesub.in && CONFIG_FILES="$CONFIG_FILES $dir/tests/Makesub"
-done
-ac_config_files="$ac_config_files $CONFIG_FILES"
-
-configure_args=$ac_configure_args
-
-
-
 
 # Enable expensive internal checks
 is_release=
@@ -2698,30 +2598,6 @@ if test -d $srcdir/../gcc \
   is_release=yes
 fi
 
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking bugurl" >&5
-$as_echo_n "checking bugurl... " >&6; }
-
-# Check whether --with-bugurl was given.
-if test "${with_bugurl+set}" = set; then :
-  withval=$with_bugurl; case "$withval" in #(
-  yes) :
-    as_fn_error $? "--with-bugurl requires an argument" "$LINENO" 5 ;; #(
-  no) :
-    BUGURL="" ;; #(
-  *) :
-    BUGURL="${withval}" ;;
-esac
-else
-  BUGURL="${PACKAGE_BUGREPORT}"
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUGURL" >&5
-$as_echo "$BUGURL" >&6; }
-
-cat >>confdefs.h <<_ACEOF
-#define BUGURL "$BUGURL"
-_ACEOF
-
 # Check whether --enable-checking was given.
 if test "${enable_checking+set}" = set; then :
   enableval=$enable_checking; ac_checking_flags="${enableval}"
@@ -2790,8 +2666,6 @@ if test "$nms_exceptions" != no ; then
 fi
 
 
-ac_config_headers="$ac_config_headers config.h"
-
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ranlib; ac_word=$2
@@ -2976,83 +2850,14 @@ else
   AR="$ac_cv_prog_AR"
 fi
 
-# Extract the first word of "doxygen", so it can be a program name with args.
-set dummy doxygen; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_DOXYGEN+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$DOXYGEN"; then
-  ac_cv_prog_DOXYGEN="$DOXYGEN" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_DOXYGEN="doxygen"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-  test -z "$ac_cv_prog_DOXYGEN" && ac_cv_prog_DOXYGEN=": NOTdoxygen"
-fi
-fi
-DOXYGEN=$ac_cv_prog_DOXYGEN
-if test -n "$DOXYGEN"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DOXYGEN" >&5
-$as_echo "$DOXYGEN" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
 
-# Extract the first word of "aloy", so it can be a program name with args.
-set dummy aloy; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ALOY+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ALOY"; then
-  ac_cv_prog_ALOY="$ALOY" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ALOY="aloy"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
 
-  test -z "$ac_cv_prog_ALOY" && ac_cv_prog_ALOY=": Joust testsuite missing"
-fi
-fi
-ALOY=$ac_cv_prog_ALOY
-if test -n "$ALOY"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ALOY" >&5
-$as_echo "$ALOY" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
+ac_config_headers="$ac_config_headers config.h"
 
 
+ac_config_files="$ac_config_files Makefile"
 
+configure_args=$ac_configure_args
 
 
 cat >confcache <<\_ACEOF
@@ -3744,8 +3549,8 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 for ac_config_target in $ac_config_targets
 do
   case $ac_config_target in
-    "$CONFIG_FILES") CONFIG_FILES="$CONFIG_FILES $CONFIG_FILES" ;;
     "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
+    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
 
   *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
   esac
diff --git c/libcody/configure.ac w/libcody/configure.ac
index 598e585a91b..960191ecb72 100644
--- c/libcody/configure.ac
+++ w/libcody/configure.ac
@@ -6,22 +6,17 @@ AC_INIT([codylib],[0.0],[github.com/urnathan/libcody])
 AC_CONFIG_SRCDIR(cody.hh)
 m4_include(config.m4)
 
-AC_CONFIG_AUX_DIR(build-aux)
+AC_CONFIG_AUX_DIR(..)
 AC_SUBST(PACKAGE_VERSION)
 
-NMS_NOT_IN_SOURCE
 AC_CANONICAL_HOST
 
-NMS_TOOLS
-NMS_NUM_CPUS
 NMS_MAINTAINER_MODE
 NMS_CXX_COMPILER
 AC_LANG(C++)
 AC_PROG_CXX
 NMS_CXX_11
-NMS_TOOL_DIRS
 NMS_LINK_OPT([-Wl,--no-undefined])
-NMS_CONFIG_FILES([gdbinit dox.cfg])
 
 # Enable expensive internal checks
 is_release=
@@ -31,7 +26,6 @@ if test -d $srcdir/../gcc \
   is_release=yes
 fi
 
-NMS_BUGURL
 dnl NMS_ENABLE_CHECKING
 dnl cloned from ../libcpp/configure.ac
 AC_ARG_ENABLE(checking,
@@ -75,12 +69,13 @@ AC_SUBST(PICFLAG)
 
 NMS_ENABLE_EXCEPTIONS
 
-AC_CONFIG_HEADERS([config.h])
 AC_PROG_RANLIB
 AC_CHECK_TOOL([AR],[ar])
-AC_CHECK_PROG([DOXYGEN],[doxygen],[doxygen],[: NOTdoxygen])
-AC_CHECK_PROG([ALOY],[aloy],[aloy],[: Joust testsuite missing])
 AH_VERBATIM([_GNU_SOURCE],[#define _GNU_SOURCE 1])
 AH_VERBATIM([_FORTIFY_SOURCE],[#undef _FORTIFY_SOURCE])
+AC_CONFIG_HEADERS([config.h])
+
+AC_CONFIG_FILES([Makefile])
+AC_SUBST(configure_args,[$ac_configure_args])
 
 AC_OUTPUT
diff --git c/libcody/dox.cfg.in w/libcody/dox.cfg.in
deleted file mode 100644
index 1a39b2aa6ee..00000000000
--- c/libcody/dox.cfg.in
+++ /dev/null
@@ -1,2478 +0,0 @@
-# Doxyfile 1.8.15
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the configuration
-# file that follow. The default is UTF-8 which is also the encoding used for all
-# text before the first occurrence of this tag. Doxygen uses libiconv (or the
-# iconv built into libc) for the transcoding. See
-# https://www.gnu.org/software/libiconv/ for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "libcody"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         = @PACKAGE_VERSION@
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          = "A Compiler/Build System Interface"
-
-# With the PROJECT_LOGO tag one can specify a logo or an icon that is included
-# in the documentation. The maximum height of the logo should not exceed 55
-# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
-# the logo to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = dox
-
-# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all generated output in the proper direction.
-# Possible values are: None, LTR, RTL and Context.
-# The default value is: None.
-
-OUTPUT_TEXT_DIRECTION  = None
-
-# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = NO
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = NO
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = YES
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
-# page for each member. If set to NO, the documentation of a member will be part
-# of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 8
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines (in the resulting output). You can put ^^ in the value part of an
-# alias to insert a newline as if a physical newline was in the original file.
-# When you need a literal { or } or , in the value part of an alias you have to
-# escape them by means of a backslash (\), this can lead to conflicts with the
-# commands \{ and \} for these it is advised to use the version @{ and @} or use
-# a double escape (\\{ and \\})
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = NO
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice
-# sources only. Doxygen will then generate output that is more tailored for that
-# language. For instance, namespaces will be presented as modules, types will be
-# separated into more groups, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_SLICE  = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice,
-# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran:
-# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser
-# tries to guess whether the code is fixed or free formatted code, this is the
-# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat
-# .inc files as Fortran files (default is PHP), and .f files as C (default is
-# Fortran), use: inc=Fortran f=C.
-#
-# Note: For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      = no_extension=C++ \
-		       	 hh=C++
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See https://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = YES
-
-# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up
-# to that level are automatically included in the table of contents, even if
-# they do not have an id attribute.
-# Note: This feature currently applies only to Markdown headings.
-# Minimum value: 0, maximum value: 99, default value: 0.
-# This tag requires that the tag MARKDOWN_SUPPORT is set to YES.
-
-TOC_INCLUDE_HEADINGS   = 0
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by putting a % sign in front of the word or
-# globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = YES
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# If one adds a struct or class to a group and this option is enabled, then also
-# any nested class or struct is added to the same group. By default this option
-# is disabled and one has to add nested compounds explicitly via \ingroup.
-# The default value is: NO.
-
-GROUP_NESTED_COMPOUNDS = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = NO
-
-# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = NO
-
-# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = NO
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO,
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. If set to YES, local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO, only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO, these classes will be included in the various overviews. This option
-# has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO, these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO, these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES, upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = YES
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES, the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
-# append additional text to a page's title, such as Class Reference. If set to
-# YES the compound reference will be hidden.
-# The default value is: NO.
-
-HIDE_COMPOUND_REFERENCE= NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO, the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO, the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
-# list. This list is created by putting \todo commands in the documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = YES
-
-# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
-# list. This list is created by putting \test commands in the documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = YES
-
-# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = YES
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES, the
-# list will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = NO
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO, doxygen will only warn about wrong or incomplete
-# parameter documentation, but not about the absence of documentation. If
-# EXTRACT_ALL is set to YES then this flag will automatically be disabled.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = NO
-
-# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when
-# a warning is encountered.
-# The default value is: NO.
-
-WARN_AS_ERROR          = NO
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = @srcdir@
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: https://www.gnu.org/software/libiconv/) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories.
-#
-# Note that for custom extensions or not directly supported extensions you also
-# need to set EXTENSION_MAPPING for the extension otherwise the files are not
-# read by doxygen.
-#
-# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp,
-# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h,
-# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc,
-# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08,
-# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice.
-
-FILE_PATTERNS          = *.cc *.hh
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = NO
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                =
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        =
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-#
-# Note that for custom extensions or not directly supported extensions you also
-# need to set EXTENSION_MAPPING for the extension otherwise the files are not
-# properly processed by doxygen.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-#
-# Note that for custom extensions or not directly supported extensions you also
-# need to set EXTENSION_MAPPING for the extension otherwise the files are not
-# properly processed by doxygen.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE = README.md
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# entity all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = YES
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see https://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefore more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra style sheet files is of importance (e.g. the last
-# style sheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the style sheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# https://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to YES can help to show when doxygen was last run and thus if the
-# documentation is up to date.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML
-# documentation will contain a main index with vertical navigation menus that
-# are dynamically created via Javascript. If disabled, the navigation index will
-# consists of multiple levels of tabs that are statically embedded in every HTML
-# page. Disable this option to support browsers that do not have Javascript,
-# like the Qt help browser.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_MENUS     = YES
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = NO
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: https://developer.apple.com/xcode/), introduced with OSX
-# 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy
-# genXcode/_index.html for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler (hhc.exe). If non-empty,
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated
-# (YES) or that it should be included in the master .chm file (NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated
-# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = NO
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = NO
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = NO
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 4
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANSPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# https://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from https://www.mathjax.org before deployment.
-# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = YES
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer (doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: https://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer (doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: https://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = YES
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when not enabling USE_PDFLATEX the default is latex when enabling
-# USE_PDFLATEX the default is pdflatex and when in the later case latex is
-# chosen this is overwritten by pdflatex. For specific output languages the
-# default can have been set differently, this depends on the implementation of
-# the output language.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         =
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# Note: This tag is used in the Makefile / make.bat.
-# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file
-# (.tex).
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to
-# generate index for LaTeX.
-# Note: This tag is used in the generated output file (.tex).
-# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat.
-# The default value is: \makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_MAKEINDEX_CMD    = \makeindex
-
-# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. The package can be specified just
-# by its name or with the correct syntax as to be used with the LaTeX
-# \usepackage command. To get the times font for instance you can specify :
-# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times}
-# To use the option intlimits with the amsmath package you can specify:
-# EXTRA_PACKAGES=[intlimits]{amsmath}
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empty
-# string, for the replacement values of the other commands the user is referred
-# to HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# LaTeX style sheets that are included after the standard style sheets created
-# by doxygen. Using this option one can overrule certain style aspects. Doxygen
-# will copy the style sheet files to the output directory.
-# Note: The order of the extra style sheet files is of importance (e.g. the last
-# style sheet in the list overrules the setting of the previous ones in the
-# list).
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_STYLESHEET =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES, to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# https://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_TIMESTAMP        = NO
-
-# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute)
-# path from which the emoji images will be read. If a relative path is entered,
-# it will be relative to the LATEX_OUTPUT directory. If left blank the
-# LATEX_OUTPUT directory will be used.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EMOJI_DIRECTORY  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's
-# configuration file, i.e. a series of assignments. You only have to provide
-# replacements, missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's configuration file. A template extensions file can be
-# generated using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
-# with syntax highlighting in the RTF output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_SOURCE_CODE        = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include
-# namespace members in file scope as well, matching the HTML output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_NS_MEMB_FILE_SCOPE = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
-# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures
-# the structure of the code including all documentation. Note that this feature
-# is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO, the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
-# in the source code. If set to NO, only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = NO
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = NO
-
-# If the SEARCH_INCLUDES tag is set to YES, the include files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             =
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES, all external class will be listed in
-# the class index. If set to NO, only the inherited external classes will be
-# listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
-# in the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = YES
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           = Helvetica
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = YES
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = YES
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = YES
-
-# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = YES
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = YES
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command. Disabling a call graph can be
-# accomplished by means of the command \hidecallgraph.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command. Disabling a caller graph can be
-# accomplished by means of the command \hidecallergraph.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = YES
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = YES
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot. For an explanation of the image formats see the section
-# output formats in the documentation of the dot tool (Graphviz (see:
-# http://www.graphviz.org/)).
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo,
-# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and
-# png:gdiplus:gdiplus.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-
-PLANTUML_JAR_PATH      =
-
-# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a
-# configuration file for plantuml.
-
-PLANTUML_CFG_FILE      =
-
-# When using plantuml, the specified paths are searched for files specified by
-# the !include statement in a plantuml block.
-
-PLANTUML_INCLUDE_PATH  =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 50
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 0
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = NO
-
-# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git c/libcody/fatal.cc w/libcody/fatal.cc
index c1bc8ab8a79..0e805b1456c 100644
--- c/libcody/fatal.cc
+++ w/libcody/fatal.cc
@@ -30,8 +30,6 @@ void (HCF) (char const *msg
 #endif
 	  ) noexcept
 { // HCF - you goofed!
-  // A useful place for a breakpoint to land.
-  //__asm__ volatile ("nop");  // HCF - you goofed!
 
 #if !NMS_CHECKING
   constexpr Location loc (nullptr, 0);
@@ -56,24 +54,4 @@ void (HCF) (char const *msg
   exit (2);
 }
 
-void BuildNote (FILE *stream) noexcept
-{
-  fprintf (stream, "Version %s.\n", PACKAGE_NAME " " PACKAGE_VERSION);
-  fprintf (stream, "Report bugs to %s.\n", BUGURL[0] ? BUGURL : "you");
-  if (PACKAGE_URL[0])
-    fprintf (stream, "See %s for more information.\n", PACKAGE_URL);
-  if (REVISION[0])
-    fprintf (stream, "Source %s.\n", REVISION);
-
-  fprintf (stream, "Build is %s & %s.\n",
-#if !NMS_CHECKING
-	   "un"
-#endif
-	   "checked",
-#if !__OPTIMIZE__
-	   "un"
-#endif
-	   "optimized");
-}
-
 }
diff --git c/libcody/gdbinit.in w/libcody/gdbinit.in
deleted file mode 100644
index b81b7d83981..00000000000
--- c/libcody/gdbinit.in
+++ /dev/null
@@ -1,11 +0,0 @@
-# CODYlib  -*- mode:autoconf -*-
-# Copyright (C) 2020 Nathan Sidwell, nathan@acm.org
-# License: Apache v2.0
-
-dir @srcdir@
-# some default breakpoints, to catch the fatal exit
-set breakpoint pending on
-break HCF
-set complaints 0
-break exit
-set breakpoint pending off
diff --git c/libcody/internal.hh w/libcody/internal.hh
index 87673f56657..8901629cddb 100644
--- c/libcody/internal.hh
+++ w/libcody/internal.hh
@@ -130,7 +130,4 @@ inline void Unreachable () noexcept
 }
 #endif
 
-// FIXME: This should be user visible in some way
-void BuildNote (FILE *stream) noexcept;
-
 }
