Message ID | CANLjY-=y8pnK2jJZ+mo212o=5b0yOMgvy5G=WhoKnJX_mOV1CQ@mail.gmail.com |
---|---|
State | New |
Headers | show |
On 23/04/12 22:36, Michael Hope wrote: > On 24 April 2012 03:35, Richard Earnshaw <rearnsha@arm.com> wrote: >> On 22/04/12 23:20, Michael Hope wrote: >>> Change the dynamic linker path for ARM hard float executables. >>> Matches the path discussed and agreed on last week[1]. Carlos will >>> follow up with the matching patch to GLIBC[2]. I'm happy to if he's >>> busy. >>> >>> OK for trunk? >>> >>> -- Michael >>> [1] http://sourceware.org/ml/libc-ports/2012-04/msg00060.html >>> [2] http://sourceware.org/ml/libc-ports/2012-04/msg00064.html >>> >>> 2012-04-23 Michael Hope <michael.hope@linaro.org> >>> >>> * config/arm/linux-eabi.h (GLIBC_DYNAMIC_LINKER_HARD_FLOAT): Define. >>> (GLIBC_DYNAMIC_LINKER_SOFT_FLOAT): Define. >>> (GLIBC_DYNAMIC_LINKER): Redefine to use the hard float path. >>> >>> diff --git a/gcc/config/arm/linux-eabi.h b/gcc/config/arm/linux-eabi.h >>> index 80bd825..3ddf812 100644 >>> --- a/gcc/config/arm/linux-eabi.h >>> +++ b/gcc/config/arm/linux-eabi.h >>> @@ -62,7 +62,11 @@ >>> /* Use ld-linux.so.3 so that it will be possible to run "classic" >>> GNU/Linux binaries on an EABI system. */ >>> #undef GLIBC_DYNAMIC_LINKER >>> -#define GLIBC_DYNAMIC_LINKER "/lib/ld-linux.so.3" >>> +#define GLIBC_DYNAMIC_LINKER_SOFT_FLOAT "/lib/ld-linux.so.3" >>> +#define GLIBC_DYNAMIC_LINKER_HARD_FLOAT "/lib/ld-linux-armhf.so.3" >>> +#define GLIBC_DYNAMIC_LINKER \ >>> + "%{mfloat-abi=hard:" GLIBC_DYNAMIC_LINKER_HARD_FLOAT "} \ >>> + %{!mfloat-abi=hard:" GLIBC_DYNAMIC_LINKER_SOFT_FLOAT "}" >>> >>> /* At this point, bpabi.h will have clobbered LINK_SPEC. We want to >>> use the GNU/Linux version, not the generic BPABI version. */ >>> >> >> >> I think this should handle having the hard-float variant as the default >> more gracefully, so something like: >> >> >> -#define GLIBC_DYNAMIC_LINKER "/lib/ld-linux.so.3" >> +#define GLIBC_DYNAMIC_LINKER_SOFT_FLOAT "/lib/ld-linux.so.3" >> +#define GLIBC_DYNAMIC_LINKER_HARD_FLOAT "/lib/ld-linux-armhf.so.3" >> +#if TARGET_DEFAULT_FLOAT_ABI == ARM_FLOAT_ABI_HARD >> +#define GLIBC_DYNAMIC_LINKER_DEFAULT GLIBC_DYNAMIC_LINKER_HARD_FLOAT >> +#else >> +#define GLIBC_DYNAMIC_LINKER_DEFAULT GLIBC_DYNAMIC_LINKER_SOFT_FLOAT >> +#endif >> +#define GLIBC_DYNAMIC_LINKER \ >> + "%{mfloat-abi=hard:" GLIBC_DYNAMIC_LINKER_HARD_FLOAT "} \ >> + %{mfloat-abi=soft*:" GLIBC_DYNAMIC_LINKER_SOFT_FLOAT "} \ >> + %{!mfloat-abi=*:" GLIBC_DYNAMIC_LINKER_DEFAULT "}" >> >> But I haven't tested any of that. > > It tests just fine when setting the float ABI at configure time or > explicitly. Updated patch is below. I prefer the original, shorter > version but the new one is easier for someone else to understand. > Your version would work for configuration using --with-float-abi, but not for built-in setting with hard-float as default. > OK for trunk? > OK. > -- Michael > > 2012-04-24 Michael Hope <michael.hope@linaro.org> > Richard Earnshaw <rearnsha@arm.com> > > * config/arm/linux-eabi.h (GLIBC_DYNAMIC_LINKER_SOFT_FLOAT): Define. > (GLIBC_DYNAMIC_LINKER_HARD_FLOAT): Define. > (GLIBC_DYNAMIC_LINKER_DEFAULT): Define. > (GLIBC_DYNAMIC_LINKER): Redefine to use the hard float path. > > diff --git a/gcc/config/arm/linux-eabi.h b/gcc/config/arm/linux-eabi.h > index 80bd825..2ace6f0 100644 > --- a/gcc/config/arm/linux-eabi.h > +++ b/gcc/config/arm/linux-eabi.h > @@ -62,7 +62,17 @@ > /* Use ld-linux.so.3 so that it will be possible to run "classic" > GNU/Linux binaries on an EABI system. */ > #undef GLIBC_DYNAMIC_LINKER > -#define GLIBC_DYNAMIC_LINKER "/lib/ld-linux.so.3" > +#define GLIBC_DYNAMIC_LINKER_SOFT_FLOAT "/lib/ld-linux.so.3" > +#define GLIBC_DYNAMIC_LINKER_HARD_FLOAT "/lib/ld-linux-armhf.so.3" > +#if TARGET_DEFAULT_FLOAT_ABI == ARM_FLOAT_ABI_HARD > +#define GLIBC_DYNAMIC_LINKER_DEFAULT GLIBC_DYNAMIC_LINKER_HARD_FLOAT > +#else > +#define GLIBC_DYNAMIC_LINKER_DEFAULT GLIBC_DYNAMIC_LINKER_SOFT_FLOAT > +#endif > +#define GLIBC_DYNAMIC_LINKER \ > + "%{mfloat-abi=hard:" GLIBC_DYNAMIC_LINKER_HARD_FLOAT "} \ > + %{mfloat-abi=soft*:" GLIBC_DYNAMIC_LINKER_SOFT_FLOAT "} \ > + %{!mfloat-abi=*:" GLIBC_DYNAMIC_LINKER_DEFAULT "}" > > /* At this point, bpabi.h will have clobbered LINK_SPEC. We want to > use the GNU/Linux version, not the generic BPABI version. */ >
On Mon, Apr 23, 2012 at 5:36 PM, Michael Hope <michael.hope@linaro.org> wrote: > 2012-04-24 Michael Hope <michael.hope@linaro.org> > Richard Earnshaw <rearnsha@arm.com> > > * config/arm/linux-eabi.h (GLIBC_DYNAMIC_LINKER_SOFT_FLOAT): Define. > (GLIBC_DYNAMIC_LINKER_HARD_FLOAT): Define. > (GLIBC_DYNAMIC_LINKER_DEFAULT): Define. > (GLIBC_DYNAMIC_LINKER): Redefine to use the hard float path. > > diff --git a/gcc/config/arm/linux-eabi.h b/gcc/config/arm/linux-eabi.h > index 80bd825..2ace6f0 100644 > --- a/gcc/config/arm/linux-eabi.h > +++ b/gcc/config/arm/linux-eabi.h > @@ -62,7 +62,17 @@ > /* Use ld-linux.so.3 so that it will be possible to run "classic" > GNU/Linux binaries on an EABI system. */ > #undef GLIBC_DYNAMIC_LINKER > -#define GLIBC_DYNAMIC_LINKER "/lib/ld-linux.so.3" > +#define GLIBC_DYNAMIC_LINKER_SOFT_FLOAT "/lib/ld-linux.so.3" > +#define GLIBC_DYNAMIC_LINKER_HARD_FLOAT "/lib/ld-linux-armhf.so.3" > +#if TARGET_DEFAULT_FLOAT_ABI == ARM_FLOAT_ABI_HARD > +#define GLIBC_DYNAMIC_LINKER_DEFAULT GLIBC_DYNAMIC_LINKER_HARD_FLOAT > +#else > +#define GLIBC_DYNAMIC_LINKER_DEFAULT GLIBC_DYNAMIC_LINKER_SOFT_FLOAT > +#endif > +#define GLIBC_DYNAMIC_LINKER \ > + "%{mfloat-abi=hard:" GLIBC_DYNAMIC_LINKER_HARD_FLOAT "} \ > + %{mfloat-abi=soft*:" GLIBC_DYNAMIC_LINKER_SOFT_FLOAT "} \ > + %{!mfloat-abi=*:" GLIBC_DYNAMIC_LINKER_DEFAULT "}" > > /* At this point, bpabi.h will have clobbered LINK_SPEC. We want to > use the GNU/Linux version, not the generic BPABI version. */ This patch is broken. Please fix this. You can't use a named enumeration in cpp equality. The type ARM_FLOAT_ABI_HARD is a named enumeration and evaluates to 0 as an unknown identifier. Therefore "#if TARGET_DEFAULT_FLOAT_ABI == ARM_FLOAT_ABI_HARD" evaluates to "#if 0 == 0" and is always true. Watch out that "#define ARM_FLOAT_ABI_HARD ARM_FLOAT_ABI_HARD" for such enums is not conforming C99/C11. I suggest you define the types as macros and then set the named enum to those values, then use the macros in the header equality checks. e.g. #define VAL1 0 then enum FOO { RVAL1 = VAL1, ... } Look at arm.h for the enum definition. Cheers, Carlos.
diff --git a/gcc/config/arm/linux-eabi.h b/gcc/config/arm/linux-eabi.h index 80bd825..2ace6f0 100644 --- a/gcc/config/arm/linux-eabi.h +++ b/gcc/config/arm/linux-eabi.h @@ -62,7 +62,17 @@ /* Use ld-linux.so.3 so that it will be possible to run "classic" GNU/Linux binaries on an EABI system. */ #undef GLIBC_DYNAMIC_LINKER -#define GLIBC_DYNAMIC_LINKER "/lib/ld-linux.so.3" +#define GLIBC_DYNAMIC_LINKER_SOFT_FLOAT "/lib/ld-linux.so.3" +#define GLIBC_DYNAMIC_LINKER_HARD_FLOAT "/lib/ld-linux-armhf.so.3" +#if TARGET_DEFAULT_FLOAT_ABI == ARM_FLOAT_ABI_HARD +#define GLIBC_DYNAMIC_LINKER_DEFAULT GLIBC_DYNAMIC_LINKER_HARD_FLOAT +#else +#define GLIBC_DYNAMIC_LINKER_DEFAULT GLIBC_DYNAMIC_LINKER_SOFT_FLOAT +#endif +#define GLIBC_DYNAMIC_LINKER \ + "%{mfloat-abi=hard:" GLIBC_DYNAMIC_LINKER_HARD_FLOAT "} \ + %{mfloat-abi=soft*:" GLIBC_DYNAMIC_LINKER_SOFT_FLOAT "} \ + %{!mfloat-abi=*:" GLIBC_DYNAMIC_LINKER_DEFAULT "}" /* At this point, bpabi.h will have clobbered LINK_SPEC. We want to use the GNU/Linux version, not the generic BPABI version. */