From 087e545747ca9ee977e84326877b0ce1bc4c383a Mon Sep 17 00:00:00 2001
From: Thomas Schwinge <thomas@codesourcery.com>
Date: Fri, 21 Jan 2022 12:48:28 +0100
Subject: [PATCH] Strengthen a few OpenACC test cases

Rather than rubber-stamp whatever requested vs. actual device kernel launch
configuration happens, actually (again) verify the requested values (modulo
expected variations).

This better highlights that "AMD GCN has an upper limit of 'num_workers(16)'",
and the deficiency that "AMD GCN uses the autovectorizer for the vector
dimension: the use of a function call in vector-partitioned code [...] is not
currently supported".

And, this removes several instances of race conditions, where variables are
concurrently written to in OpenACC gang-redundant mode.

	libgomp/
	* testsuite/libgomp.oacc-c-c++-common/loop-gwv-1.c: Strengthen.
	* testsuite/libgomp.oacc-c-c++-common/loop-gwv-2.c: Likewise.
	* testsuite/libgomp.oacc-c-c++-common/loop-red-gwv-1.c: Likewise.
	* testsuite/libgomp.oacc-c-c++-common/loop-red-v-1.c: Likewise.
	* testsuite/libgomp.oacc-c-c++-common/loop-red-v-2.c: Likewise.
	* testsuite/libgomp.oacc-c-c++-common/loop-red-w-1.c: Likewise.
	* testsuite/libgomp.oacc-c-c++-common/loop-red-w-2.c: Likewise.
	* testsuite/libgomp.oacc-c-c++-common/loop-red-wv-1.c: Likewise.
	* testsuite/libgomp.oacc-c-c++-common/loop-v-1.c: Likewise.
	* testsuite/libgomp.oacc-c-c++-common/loop-w-1.c: Likewise.
	* testsuite/libgomp.oacc-c-c++-common/loop-wv-1.c: Likewise.
	* testsuite/libgomp.oacc-c-c++-common/routine-gwv-1.c: Likewise.
	* testsuite/libgomp.oacc-c-c++-common/routine-v-1.c: Likewise.
	* testsuite/libgomp.oacc-c-c++-common/routine-w-1.c: Likewise.
	* testsuite/libgomp.oacc-c-c++-common/routine-wv-1.c: Likewise.
---
 .../libgomp.oacc-c-c++-common/loop-gwv-1.c    | 25 ++++++++++----
 .../libgomp.oacc-c-c++-common/loop-gwv-2.c    | 34 +++++++++++++++----
 .../loop-red-gwv-1.c                          | 22 +++++++++---
 .../libgomp.oacc-c-c++-common/loop-red-v-1.c  | 11 ++++--
 .../libgomp.oacc-c-c++-common/loop-red-v-2.c  | 11 ++++--
 .../libgomp.oacc-c-c++-common/loop-red-w-1.c  | 13 +++++--
 .../libgomp.oacc-c-c++-common/loop-red-w-2.c  | 13 +++++--
 .../libgomp.oacc-c-c++-common/loop-red-wv-1.c | 19 ++++++++---
 .../libgomp.oacc-c-c++-common/loop-v-1.c      | 13 +++++--
 .../libgomp.oacc-c-c++-common/loop-w-1.c      | 13 +++++--
 .../libgomp.oacc-c-c++-common/loop-wv-1.c     | 19 ++++++++---
 .../libgomp.oacc-c-c++-common/routine-gwv-1.c | 21 +++++++++---
 .../libgomp.oacc-c-c++-common/routine-v-1.c   | 13 +++++--
 .../libgomp.oacc-c-c++-common/routine-w-1.c   | 13 +++++--
 .../libgomp.oacc-c-c++-common/routine-wv-1.c  | 19 ++++++++---
 15 files changed, 202 insertions(+), 57 deletions(-)

diff --git a/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-gwv-1.c b/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-gwv-1.c
index e5ed2ab7006..d3f6ea24e7e 100644
--- a/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-gwv-1.c
+++ b/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-gwv-1.c
@@ -19,9 +19,12 @@ int main ()
 
   for (ix = 0; ix < N;ix++)
     ary[ix] = -1;
-  
-#pragma acc parallel num_gangs(32) num_workers(32) vector_length(32) \
-	    copy(ary) copy(ondev) copyout(gangsize, workersize, vectorsize)
+
+#define NG 32
+#define NW 32
+#define VL 32
+#pragma acc parallel num_gangs(NG) num_workers(NW) vector_length(VL) \
+	    copy(ary) copy(ondev)
   /* { dg-note {variable 'ix' declared in block isn't candidate for adjusting OpenACC privatization level: not addressable} "" { target *-*-* } .-2 } */
   {
 #pragma acc loop gang worker vector
@@ -45,11 +48,19 @@ int main ()
 	else
 	  ary[ix] = ix;
       }
-
-    gangsize = __builtin_goacc_parlevel_size (GOMP_DIM_GANG);
-    workersize = __builtin_goacc_parlevel_size (GOMP_DIM_WORKER);
-    vectorsize = __builtin_goacc_parlevel_size (GOMP_DIM_VECTOR);
   }
+  gangsize = NG;
+  workersize = NW;
+  vectorsize = VL;
+#ifdef ACC_DEVICE_TYPE_radeon
+  /* AMD GCN has an upper limit of 'num_workers(16)'.  */
+  if (workersize > 16)
+    workersize = 16;
+  /* AMD GCN uses the autovectorizer for the vector dimension: the use
+     of a function call in vector-partitioned code in this test is not
+     currently supported.  */
+  vectorsize = 1;
+#endif
 
   for (ix = 0; ix < N; ix++)
     {
diff --git a/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-gwv-2.c b/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-gwv-2.c
index e73ed6064eb..4b761f0f624 100644
--- a/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-gwv-2.c
+++ b/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-gwv-2.c
@@ -46,14 +46,17 @@ int main ()
   int ary[N];
   int ix;
   int exit = 0;
-  int gangsize = 0, workersize = 0, vectorsize = 0;
+  int gangsize, workersize, vectorsize;
   int *gangdist, *workerdist, *vectordist;
 
   for (ix = 0; ix < N;ix++)
     ary[ix] = -1;
 
-#pragma acc parallel num_gangs(32) num_workers(32) vector_length(32) \
-	    copy(ary) copyout(gangsize, workersize, vectorsize)
+#define NG 32
+#define NW 32
+#define VL 32
+#pragma acc parallel num_gangs(NG) num_workers(NW) vector_length(VL) \
+	    copy(ary)
   /* { dg-note {variable 'ix' declared in block isn't candidate for adjusting OpenACC privatization level: not addressable} "" { target *-*-* } .-2 } */
   {
 #pragma acc loop gang worker vector
@@ -71,11 +74,23 @@ int main ()
 
 	ary[ix] = (g << 16) | (w << 8) | v;
       }
-
-    gangsize = __builtin_goacc_parlevel_size (GOMP_DIM_GANG);
-    workersize = __builtin_goacc_parlevel_size (GOMP_DIM_WORKER);
-    vectorsize = __builtin_goacc_parlevel_size (GOMP_DIM_VECTOR);
   }
+  gangsize = NG;
+  workersize = NW;
+  vectorsize = VL;
+#if defined ACC_DEVICE_TYPE_host
+  gangsize = 1;
+  workersize = 1;
+  vectorsize = 1;
+#elif defined ACC_DEVICE_TYPE_radeon
+  /* AMD GCN has an upper limit of 'num_workers(16)'.  */
+  if (workersize > 16)
+    workersize = 16;
+  /* AMD GCN uses the autovectorizer for the vector dimension: the use
+     of a function call in vector-partitioned code in this test is not
+     currently supported.  */
+  vectorsize = 1;
+#endif
 
   gangdist = (int *) __builtin_alloca (gangsize * sizeof (int));
   workerdist = (int *) __builtin_alloca (workersize * sizeof (int));
@@ -92,6 +107,11 @@ int main ()
       int w = (ary[ix] >> 8) & 255;
       int v = ary[ix] & 255;
 
+      if (g >= gangsize
+	  || w >= workersize
+	  || v >= vectorsize)
+	__builtin_abort ();
+
       gangdist[g]++;
       workerdist[w]++;
       vectordist[v]++;
diff --git a/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-red-gwv-1.c b/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-red-gwv-1.c
index c1a2d0cffe1..4099d6072da 100644
--- a/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-red-gwv-1.c
+++ b/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-red-gwv-1.c
@@ -16,8 +16,11 @@ int main ()
   int t = 0, h = 0;
   int gangsize, workersize, vectorsize;
 
-#pragma acc parallel num_gangs(32) num_workers(32) vector_length(32) \
-	copy(ondev) copyout(gangsize, workersize, vectorsize)
+#define NG 32
+#define NW 32
+#define VL 32
+#pragma acc parallel num_gangs(NG) num_workers(NW) vector_length(VL) \
+	copy(ondev)
   /* { dg-note {variable 'ix' declared in block isn't candidate for adjusting OpenACC privatization level: not addressable} "" { target *-*-* } .-2 } */
   {
 #pragma acc loop gang worker vector reduction(+:t)
@@ -42,10 +45,19 @@ int main ()
 	  }
 	t += val;
       }
-    gangsize = __builtin_goacc_parlevel_size (GOMP_DIM_GANG);
-    workersize = __builtin_goacc_parlevel_size (GOMP_DIM_WORKER);
-    vectorsize = __builtin_goacc_parlevel_size (GOMP_DIM_VECTOR);
   }
+  gangsize = NG;
+  workersize = NW;
+  vectorsize = VL;
+#ifdef ACC_DEVICE_TYPE_radeon
+  /* AMD GCN has an upper limit of 'num_workers(16)'.  */
+  if (workersize > 16)
+    workersize = 16;
+  /* AMD GCN uses the autovectorizer for the vector dimension: the use
+     of a function call in vector-partitioned code in this test is not
+     currently supported.  */
+  vectorsize = 1;
+#endif
 
   for (ix = 0; ix < N; ix++)
     {
diff --git a/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-red-v-1.c b/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-red-v-1.c
index 58c7b6ab57f..0fe368623c3 100644
--- a/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-red-v-1.c
+++ b/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-red-v-1.c
@@ -17,7 +17,8 @@ int main ()
   int t = 0,  h = 0;
   int vectorsize;
 
-#pragma acc parallel vector_length(32) copy(ondev) copyout(vectorsize)
+#define VL 32
+#pragma acc parallel vector_length(VL) copy(ondev)
   /* { dg-note {variable 'ix' declared in block isn't candidate for adjusting OpenACC privatization level: not addressable} "" { target *-*-* } .-1 } */
   {
 #pragma acc loop vector reduction (+:t)
@@ -42,8 +43,14 @@ int main ()
 	  }
 	t += val;
       }
-    vectorsize = __builtin_goacc_parlevel_size (GOMP_DIM_VECTOR);
   }
+  vectorsize = VL;
+#ifdef ACC_DEVICE_TYPE_radeon
+  /* AMD GCN uses the autovectorizer for the vector dimension: the use
+     of a function call in vector-partitioned code in this test is not
+     currently supported.  */
+  vectorsize = 1;
+#endif
 
   for (ix = 0; ix < N; ix++)
     {
diff --git a/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-red-v-2.c b/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-red-v-2.c
index 85931f5e433..0cf2d473eb8 100644
--- a/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-red-v-2.c
+++ b/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-red-v-2.c
@@ -17,7 +17,8 @@ int main ()
   int q = 0,  h = 0;
   int vectorsize;
 
-#pragma acc parallel vector_length(32) copy(q) copy(ondev) copyout(vectorsize)
+#define VL 32
+#pragma acc parallel vector_length(VL) copy(q) copy(ondev)
   /* { dg-note {variable 't' declared in block isn't candidate for adjusting OpenACC privatization level: not addressable} "" { target *-*-* } .-1 } */
   /* { dg-note {variable 'ix' declared in block isn't candidate for adjusting OpenACC privatization level: not addressable} "" { target *-*-* } .-2 } */
   {
@@ -46,8 +47,14 @@ int main ()
 	t += val;
       }
     q = t;
-    vectorsize = __builtin_goacc_parlevel_size (GOMP_DIM_VECTOR);
   }
+  vectorsize = VL;
+#ifdef ACC_DEVICE_TYPE_radeon
+  /* AMD GCN uses the autovectorizer for the vector dimension: the use
+     of a function call in vector-partitioned code in this test is not
+     currently supported.  */
+  vectorsize = 1;
+#endif
 
   for (ix = 0; ix < N; ix++)
     {
diff --git a/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-red-w-1.c b/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-red-w-1.c
index b9ceec9887d..b0cb09399ba 100644
--- a/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-red-w-1.c
+++ b/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-red-w-1.c
@@ -19,8 +19,10 @@ int main ()
   int t = 0,  h = 0;
   int workersize;
 
-#pragma acc parallel num_workers(32) vector_length(32) copy(ondev) \
-	    copyout(workersize)
+#define NW 32
+#define VL 32
+#pragma acc parallel num_workers(NW) vector_length(VL) \
+	    copy(ondev)
   /* { dg-note {variable 'ix' declared in block isn't candidate for adjusting OpenACC privatization level: not addressable} "" { target *-*-* } .-2 } */
   /* { dg-warning "region is vector partitioned but does not contain vector partitioned code" "" { target *-*-* } .-3 } */
   {
@@ -46,8 +48,13 @@ int main ()
 	  }
 	t += val;
       }
-    workersize = __builtin_goacc_parlevel_size (GOMP_DIM_WORKER);
   }
+  workersize = NW;
+#ifdef ACC_DEVICE_TYPE_radeon
+  /* AMD GCN has an upper limit of 'num_workers(16)'.  */
+  if (workersize > 16)
+    workersize = 16;
+#endif
 
   for (ix = 0; ix < N; ix++)
     {
diff --git a/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-red-w-2.c b/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-red-w-2.c
index ff5e4a1656b..f9baedb0c46 100644
--- a/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-red-w-2.c
+++ b/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-red-w-2.c
@@ -19,8 +19,10 @@ int main ()
   int q = 0,  h = 0;
   int workersize;
 
-#pragma acc parallel num_workers(32) vector_length(32) copy(q) copy(ondev) \
-	    copyout(workersize)
+#define NW 32
+#define VL 32
+#pragma acc parallel num_workers(NW) vector_length(VL) \
+	    copy(q) copy(ondev)
   /* { dg-note {variable 't' declared in block isn't candidate for adjusting OpenACC privatization level: not addressable} "" { target *-*-* } .-2 } */
   /* { dg-note {variable 'ix' declared in block isn't candidate for adjusting OpenACC privatization level: not addressable} "" { target *-*-* } .-3 } */
   /* { dg-warning "region is vector partitioned but does not contain vector partitioned code" "" { target *-*-* } .-4 } */
@@ -50,8 +52,13 @@ int main ()
 	t += val;
       }
     q = t;
-    workersize = __builtin_goacc_parlevel_size (GOMP_DIM_WORKER);
   }
+  workersize = NW;
+#ifdef ACC_DEVICE_TYPE_radeon
+  /* AMD GCN has an upper limit of 'num_workers(16)'.  */
+  if (workersize > 16)
+    workersize = 16;
+#endif
 
   for (ix = 0; ix < N; ix++)
     {
diff --git a/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-red-wv-1.c b/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-red-wv-1.c
index 5d60899acc1..fadb2627f73 100644
--- a/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-red-wv-1.c
+++ b/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-red-wv-1.c
@@ -16,8 +16,10 @@ int main ()
   int t = 0, h = 0;
   int workersize, vectorsize;
   
-#pragma acc parallel num_workers(32) vector_length(32) copy(ondev) \
-	    copyout(workersize, vectorsize)
+#define NW 32
+#define VL 32
+#pragma acc parallel num_workers(NW) vector_length(VL) \
+	    copy(ondev)
   /* { dg-note {variable 'ix' declared in block isn't candidate for adjusting OpenACC privatization level: not addressable} "" { target *-*-* } .-2 } */
   {
 #pragma acc loop worker vector reduction (+:t)
@@ -42,9 +44,18 @@ int main ()
 	  }
 	t += val;
       }
-    workersize = __builtin_goacc_parlevel_size (GOMP_DIM_WORKER);
-    vectorsize = __builtin_goacc_parlevel_size (GOMP_DIM_VECTOR);
   }
+  workersize = NW;
+  vectorsize = VL;
+#ifdef ACC_DEVICE_TYPE_radeon
+  /* AMD GCN has an upper limit of 'num_workers(16)'.  */
+  if (workersize > 16)
+    workersize = 16;
+  /* AMD GCN uses the autovectorizer for the vector dimension: the use
+     of a function call in vector-partitioned code in this test is not
+     currently supported.  */
+  vectorsize = 1;
+#endif
 
   for (ix = 0; ix < N; ix++)
     {
diff --git a/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-v-1.c b/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-v-1.c
index 9ccc1a89b13..bfd22b0db7f 100644
--- a/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-v-1.c
+++ b/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-v-1.c
@@ -20,8 +20,9 @@ int main ()
   for (ix = 0; ix < N;ix++)
     ary[ix] = -1;
   
-#pragma acc parallel vector_length(32) copy(ary) copy(ondev) \
-	    copyout(vectorsize)
+#define VL 32
+#pragma acc parallel vector_length(VL) \
+	    copy(ary) copy(ondev)
   /* { dg-note {variable 'ix' declared in block isn't candidate for adjusting OpenACC privatization level: not addressable} "" { target *-*-* } .-2 } */
   {
 #pragma acc loop vector
@@ -44,8 +45,14 @@ int main ()
 	else
 	  ary[ix] = ix;
       }
-    vectorsize = __builtin_goacc_parlevel_size (GOMP_DIM_VECTOR);
   }
+  vectorsize = VL;
+#ifdef ACC_DEVICE_TYPE_radeon
+  /* AMD GCN uses the autovectorizer for the vector dimension: the use
+     of a function call in vector-partitioned code in this test is not
+     currently supported.  */
+  vectorsize = 1;
+#endif
 
   for (ix = 0; ix < N; ix++)
     {
diff --git a/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-w-1.c b/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-w-1.c
index 0e99ec62038..b910e251fb1 100644
--- a/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-w-1.c
+++ b/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-w-1.c
@@ -23,8 +23,10 @@ int main ()
   for (ix = 0; ix < N;ix++)
     ary[ix] = -1;
   
-#pragma acc parallel num_workers(32) vector_length(32) copy(ary) copy(ondev) \
-	    copyout(workersize)
+#define NW 32
+#define VL 32
+#pragma acc parallel num_workers(NW) vector_length(VL) \
+	    copy(ary) copy(ondev)
   /* { dg-note {variable 'ix' declared in block isn't candidate for adjusting OpenACC privatization level: not addressable} "" { target *-*-* } .-2 } */
   /* { dg-warning "region is vector partitioned but does not contain vector partitioned code" "vector" { target *-*-* } .-3 } */
   {
@@ -48,8 +50,13 @@ int main ()
 	else
 	  ary[ix] = ix;
       }
-    workersize = __builtin_goacc_parlevel_size (GOMP_DIM_WORKER);
   }
+  workersize = NW;
+#ifdef ACC_DEVICE_TYPE_radeon
+  /* AMD GCN has an upper limit of 'num_workers(16)'.  */
+  if (workersize > 16)
+    workersize = 16;
+#endif
 
   for (ix = 0; ix < N; ix++)
     {
diff --git a/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-wv-1.c b/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-wv-1.c
index f4707d15394..77326068a66 100644
--- a/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-wv-1.c
+++ b/libgomp/testsuite/libgomp.oacc-c-c++-common/loop-wv-1.c
@@ -20,8 +20,10 @@ int main ()
   for (ix = 0; ix < N;ix++)
     ary[ix] = -1;
   
-#pragma acc parallel num_workers(32) vector_length(32) copy(ary) copy(ondev) \
-	    copyout(workersize, vectorsize)
+#define NW 32
+#define VL 32
+#pragma acc parallel num_workers(NW) vector_length(VL) \
+	    copy(ary) copy(ondev)
   /* { dg-note {variable 'ix' declared in block isn't candidate for adjusting OpenACC privatization level: not addressable} "" { target *-*-* } .-2 } */
   {
 #pragma acc loop worker vector
@@ -44,9 +46,18 @@ int main ()
 	else
 	  ary[ix] = ix;
       }
-    workersize = __builtin_goacc_parlevel_size (GOMP_DIM_WORKER);
-    vectorsize = __builtin_goacc_parlevel_size (GOMP_DIM_VECTOR);
   }
+  workersize = NW;
+  vectorsize = VL;
+#ifdef ACC_DEVICE_TYPE_radeon
+  /* AMD GCN has an upper limit of 'num_workers(16)'.  */
+  if (workersize > 16)
+    workersize = 16;
+  /* AMD GCN uses the autovectorizer for the vector dimension: the use
+     of a function call in vector-partitioned code in this test is not
+     currently supported.  */
+  vectorsize = 1;
+#endif
 
   for (ix = 0; ix < N; ix++)
     {
diff --git a/libgomp/testsuite/libgomp.oacc-c-c++-common/routine-gwv-1.c b/libgomp/testsuite/libgomp.oacc-c-c++-common/routine-gwv-1.c
index da13d84908a..81e08119214 100644
--- a/libgomp/testsuite/libgomp.oacc-c-c++-common/routine-gwv-1.c
+++ b/libgomp/testsuite/libgomp.oacc-c-c++-common/routine-gwv-1.c
@@ -35,14 +35,27 @@ int main ()
   for (ix = 0; ix < N;ix++)
     ary[ix] = -1;
   
-#pragma acc parallel num_gangs(32) num_workers(32) vector_length(32) copy(ary) copy(ondev) copyout(gangsize, workersize, vectorsize)
+#define NG 32
+#define NW 32
+#define VL 32
+#pragma acc parallel num_gangs(NG) num_workers(NW) vector_length(VL) \
+  copy(ary) copy(ondev)
   {
     ondev = acc_on_device (acc_device_not_host);
     gang (ary);
-    gangsize = __builtin_goacc_parlevel_size (GOMP_DIM_GANG);
-    workersize = __builtin_goacc_parlevel_size (GOMP_DIM_WORKER);
-    vectorsize = __builtin_goacc_parlevel_size (GOMP_DIM_VECTOR);
   }
+  gangsize = NG;
+  workersize = NW;
+  vectorsize = VL;
+#ifdef ACC_DEVICE_TYPE_radeon
+  /* AMD GCN has an upper limit of 'num_workers(16)'.  */
+  if (workersize > 16)
+    workersize = 16;
+  /* AMD GCN uses the autovectorizer for the vector dimension: the use
+     of a function call in vector-partitioned code in this test is not
+     currently supported.  */
+  vectorsize = 1;
+#endif
 
   for (ix = 0; ix < N; ix++)
     {
diff --git a/libgomp/testsuite/libgomp.oacc-c-c++-common/routine-v-1.c b/libgomp/testsuite/libgomp.oacc-c-c++-common/routine-v-1.c
index dd7bb6cdcd1..7310906bd2d 100644
--- a/libgomp/testsuite/libgomp.oacc-c-c++-common/routine-v-1.c
+++ b/libgomp/testsuite/libgomp.oacc-c-c++-common/routine-v-1.c
@@ -35,13 +35,20 @@ int main ()
   for (ix = 0; ix < N;ix++)
     ary[ix] = -1;
   
-#pragma acc parallel vector_length(32) copy(ary) copy(ondev) \
-	    copyout(vectorsize)
+#define VL 32
+#pragma acc parallel vector_length(VL) \
+	    copy(ary) copy(ondev)
   {
     ondev = acc_on_device (acc_device_not_host);
     vector (ary);
-    vectorsize = __builtin_goacc_parlevel_size (GOMP_DIM_VECTOR);
   }
+  vectorsize = VL;
+#ifdef ACC_DEVICE_TYPE_radeon
+  /* AMD GCN uses the autovectorizer for the vector dimension: the use
+     of a function call in vector-partitioned code in this test is not
+     currently supported.  */
+  vectorsize = 1;
+#endif
 
   for (ix = 0; ix < N; ix++)
     {
diff --git a/libgomp/testsuite/libgomp.oacc-c-c++-common/routine-w-1.c b/libgomp/testsuite/libgomp.oacc-c-c++-common/routine-w-1.c
index b9137d81935..4521cb91143 100644
--- a/libgomp/testsuite/libgomp.oacc-c-c++-common/routine-w-1.c
+++ b/libgomp/testsuite/libgomp.oacc-c-c++-common/routine-w-1.c
@@ -39,13 +39,20 @@ int main ()
   for (ix = 0; ix < N;ix++)
     ary[ix] = -1;
   
-#pragma acc parallel num_workers(32) vector_length(32) copy(ary) copy(ondev) \
-	    copyout(workersize)
+#define NW 32
+#define VL 32
+#pragma acc parallel num_workers(NW) vector_length(VL) \
+	    copy(ary) copy(ondev)
   {
     ondev = acc_on_device (acc_device_not_host);
     worker (ary);
-    workersize = __builtin_goacc_parlevel_size (GOMP_DIM_WORKER);
   }
+  workersize = NW;
+#ifdef ACC_DEVICE_TYPE_radeon
+  /* AMD GCN has an upper limit of 'num_workers(16)'.  */
+  if (workersize > 16)
+    workersize = 16;
+#endif
 
   for (ix = 0; ix < N; ix++)
     {
diff --git a/libgomp/testsuite/libgomp.oacc-c-c++-common/routine-wv-1.c b/libgomp/testsuite/libgomp.oacc-c-c++-common/routine-wv-1.c
index 73696e4e59a..647d075bb00 100644
--- a/libgomp/testsuite/libgomp.oacc-c-c++-common/routine-wv-1.c
+++ b/libgomp/testsuite/libgomp.oacc-c-c++-common/routine-wv-1.c
@@ -35,14 +35,25 @@ int main ()
   for (ix = 0; ix < N;ix++)
     ary[ix] = -1;
   
-#pragma acc parallel num_workers(32) vector_length(32) copy(ary) copy(ondev) \
-	    copyout(workersize, vectorsize)
+#define NW 32
+#define VL 32
+#pragma acc parallel num_workers(NW) vector_length(VL) \
+	    copy(ary) copy(ondev)
   {
     ondev = acc_on_device (acc_device_not_host);
     worker (ary);
-    workersize = __builtin_goacc_parlevel_size (GOMP_DIM_WORKER);
-    vectorsize = __builtin_goacc_parlevel_size (GOMP_DIM_VECTOR);
   }
+  workersize = NW;
+  vectorsize = VL;
+#ifdef ACC_DEVICE_TYPE_radeon
+  /* AMD GCN has an upper limit of 'num_workers(16)'.  */
+  if (workersize > 16)
+    workersize = 16;
+  /* AMD GCN uses the autovectorizer for the vector dimension: the use
+     of a function call in vector-partitioned code in this test is not
+     currently supported.  */
+  vectorsize = 1;
+#endif
 
   for (ix = 0; ix < N; ix++)
     {
-- 
2.34.1

