diff mbox

[8/11] Expander changes

Message ID 4E0E05A1.9020909@codesourcery.com
State New
Headers show

Commit Message

Bernd Schmidt July 1, 2011, 5:36 p.m. UTC
This replaces remaining uses of GET_MODE_BITSIZE with GET_MODE_PRECISION
where doing so seems relatively obviously correct. The patch is intended
to cover the expander.


Bernd
* optabs.c (expand_binop): Use GET_MODE_PRECISION instead of
	GET_MODE_BITSIZE where appropriate.
	(widen_leading, expand_parity, expand_ctz, expand_ffs,
	expand_unop, expand_abs_nojump, expand_one_cmpl_abs_nojump,
	expand_float, expand_fix): Likewise.
	* expr.c (convert_move, convert_modes, expand_expr_real_2,
	expand_expr_real_1, reduce_to_bit_field_precision): Likewise.
	* stor-layout.c (get_mode_bounds): Likewise.
	* cfgexpand.c (convert_debug_memory_address, expand_debug_expr):
	Likewise.
	* convert.c (convert_to_integer): Likewise.
	* expmed.c (expand_shift_1): Likewise.

Comments

Richard Henderson July 6, 2011, 6:25 p.m. UTC | #1
On 07/01/2011 10:36 AM, Bernd Schmidt wrote:
> 	* optabs.c (expand_binop): Use GET_MODE_PRECISION instead of
> 	GET_MODE_BITSIZE where appropriate.
> 	(widen_leading, expand_parity, expand_ctz, expand_ffs,
> 	expand_unop, expand_abs_nojump, expand_one_cmpl_abs_nojump,
> 	expand_float, expand_fix): Likewise.
> 	* expr.c (convert_move, convert_modes, expand_expr_real_2,
> 	expand_expr_real_1, reduce_to_bit_field_precision): Likewise.
> 	* stor-layout.c (get_mode_bounds): Likewise.
> 	* cfgexpand.c (convert_debug_memory_address, expand_debug_expr):
> 	Likewise.
> 	* convert.c (convert_to_integer): Likewise.
> 	* expmed.c (expand_shift_1): Likewise.

Ok.


r~
diff mbox

Patch

Index: gcc/optabs.c
===================================================================
--- gcc/optabs.c.orig
+++ gcc/optabs.c
@@ -1407,7 +1407,7 @@  expand_binop (enum machine_mode mode, op
     {
       optab otheroptab = (binoptab == rotl_optab ? rotr_optab : rotl_optab);
       rtx newop1;
-      unsigned int bits = GET_MODE_BITSIZE (mode);
+      unsigned int bits = GET_MODE_PRECISION (mode);
 
       if (CONST_INT_P (op1))
         newop1 = GEN_INT (bits - INTVAL (op1));
@@ -2353,8 +2353,8 @@  widen_leading (enum machine_mode mode, r
 				  unoptab != clrsb_optab);
 	      if (temp != 0)
 		temp = expand_binop (wider_mode, sub_optab, temp,
-				     GEN_INT (GET_MODE_BITSIZE (wider_mode)
-					      - GET_MODE_BITSIZE (mode)),
+				     GEN_INT (GET_MODE_PRECISION (wider_mode)
+					      - GET_MODE_PRECISION (mode)),
 				     target, true, OPTAB_DIRECT);
 	      if (temp == 0)
 		delete_insns_since (last);
@@ -2540,7 +2540,7 @@  expand_parity (enum machine_mode mode, r
 }
 
 /* Try calculating ctz(x) as K - clz(x & -x) ,
-   where K is GET_MODE_BITSIZE(mode) - 1.
+   where K is GET_MODE_PRECISION(mode) - 1.
 
    Both __builtin_ctz and __builtin_clz are undefined at zero, so we
    don't have to worry about what the hardware does in that case.  (If
@@ -2568,7 +2568,7 @@  expand_ctz (enum machine_mode mode, rtx
   if (temp)
     temp = expand_unop_direct (mode, clz_optab, temp, NULL_RTX, true);
   if (temp)
-    temp = expand_binop (mode, sub_optab, GEN_INT (GET_MODE_BITSIZE (mode) - 1),
+    temp = expand_binop (mode, sub_optab, GEN_INT (GET_MODE_PRECISION (mode) - 1),
 			 temp, target,
 			 true, OPTAB_DIRECT);
   if (temp == 0)
@@ -2619,7 +2619,7 @@  expand_ffs (enum machine_mode mode, rtx
       if (CLZ_DEFINED_VALUE_AT_ZERO (mode, val) == 2)
 	{
 	  defined_at_zero = true;
-	  val = (GET_MODE_BITSIZE (mode) - 1) - val;
+	  val = (GET_MODE_PRECISION (mode) - 1) - val;
 	}
     }
   else
@@ -3077,8 +3077,8 @@  expand_unop (enum machine_mode mode, opt
 	      if ((unoptab == clz_optab || unoptab == clrsb_optab)
 		  && temp != 0)
 		temp = expand_binop (wider_mode, sub_optab, temp,
-				     GEN_INT (GET_MODE_BITSIZE (wider_mode)
-					      - GET_MODE_BITSIZE (mode)),
+				     GEN_INT (GET_MODE_PRECISION (wider_mode)
+					      - GET_MODE_PRECISION (mode)),
 				     target, true, OPTAB_DIRECT);
 
 	      if (temp)
@@ -3173,7 +3173,7 @@  expand_abs_nojump (enum machine_mode mod
 	      	      false) >= 2)
     {
       rtx extended = expand_shift (RSHIFT_EXPR, mode, op0,
-				   GET_MODE_BITSIZE (mode) - 1,
+				   GET_MODE_PRECISION (mode) - 1,
 				   NULL_RTX, 0);
 
       temp = expand_binop (mode, xor_optab, extended, op0, target, 0,
@@ -3274,7 +3274,7 @@  expand_one_cmpl_abs_nojump (enum machine
 	             false) >= 2)
     {
       rtx extended = expand_shift (RSHIFT_EXPR, mode, op0,
-				   GET_MODE_BITSIZE (mode) - 1,
+				   GET_MODE_PRECISION (mode) - 1,
 				   NULL_RTX, 0);
 
       temp = expand_binop (mode, xor_optab, extended, op0, target, 0,
@@ -4663,7 +4663,7 @@  expand_float (rtx to, rtx from, int unsi
 	int doing_unsigned = unsignedp;
 
 	if (fmode != GET_MODE (to)
-	    && significand_size (fmode) < GET_MODE_BITSIZE (GET_MODE (from)))
+	    && significand_size (fmode) < GET_MODE_PRECISION (GET_MODE (from)))
 	  continue;
 
 	icode = can_float_p (fmode, imode, unsignedp);
@@ -4707,7 +4707,7 @@  expand_float (rtx to, rtx from, int unsi
 
       for (fmode = GET_MODE (to);  fmode != VOIDmode;
 	   fmode = GET_MODE_WIDER_MODE (fmode))
-	if (GET_MODE_BITSIZE (GET_MODE (from)) < GET_MODE_BITSIZE (fmode)
+	if (GET_MODE_PRECISION (GET_MODE (from)) < GET_MODE_BITSIZE (fmode)
 	    && can_float_p (fmode, GET_MODE (from), 0) != CODE_FOR_nothing)
 	  break;
 
@@ -4718,7 +4718,7 @@  expand_float (rtx to, rtx from, int unsi
 
 	  /* Avoid double-rounding when TO is narrower than FROM.  */
 	  if ((significand_size (fmode) + 1)
-	      < GET_MODE_BITSIZE (GET_MODE (from)))
+	      < GET_MODE_PRECISION (GET_MODE (from)))
 	    {
 	      rtx temp1;
 	      rtx neglabel = gen_label_rtx ();
@@ -4785,7 +4785,7 @@  expand_float (rtx to, rtx from, int unsi
 			       0, label);
 
 
-      real_2expN (&offset, GET_MODE_BITSIZE (GET_MODE (from)), fmode);
+      real_2expN (&offset, GET_MODE_PRECISION (GET_MODE (from)), fmode);
       temp = expand_binop (fmode, add_optab, target,
 			   CONST_DOUBLE_FROM_REAL_VALUE (offset, fmode),
 			   target, 0, OPTAB_LIB_WIDEN);
@@ -4915,18 +4915,18 @@  expand_fix (rtx to, rtx from, int unsign
      2^63.  The subtraction of 2^63 should not generate any rounding as it
      simply clears out that bit.  The rest is trivial.  */
 
-  if (unsignedp && GET_MODE_BITSIZE (GET_MODE (to)) <= HOST_BITS_PER_WIDE_INT)
+  if (unsignedp && GET_MODE_PRECISION (GET_MODE (to)) <= HOST_BITS_PER_WIDE_INT)
     for (fmode = GET_MODE (from); fmode != VOIDmode;
 	 fmode = GET_MODE_WIDER_MODE (fmode))
       if (CODE_FOR_nothing != can_fix_p (GET_MODE (to), fmode, 0, &must_trunc)
 	  && (!DECIMAL_FLOAT_MODE_P (fmode)
-	      || GET_MODE_BITSIZE (fmode) > GET_MODE_BITSIZE (GET_MODE (to))))
+	      || GET_MODE_BITSIZE (fmode) > GET_MODE_PRECISION (GET_MODE (to))))
 	{
 	  int bitsize;
 	  REAL_VALUE_TYPE offset;
 	  rtx limit, lab1, lab2, insn;
 
-	  bitsize = GET_MODE_BITSIZE (GET_MODE (to));
+	  bitsize = GET_MODE_PRECISION (GET_MODE (to));
 	  real_2expN (&offset, bitsize - 1, fmode);
 	  limit = CONST_DOUBLE_FROM_REAL_VALUE (offset, fmode);
 	  lab1 = gen_label_rtx ();
Index: gcc/expr.c
===================================================================
--- gcc/expr.c.orig
+++ gcc/expr.c
@@ -336,8 +336,8 @@  convert_move (rtx to, rtx from, int unsi
      TO here.  */
 
   if (GET_CODE (from) == SUBREG && SUBREG_PROMOTED_VAR_P (from)
-      && (GET_MODE_SIZE (GET_MODE (SUBREG_REG (from)))
-	  >= GET_MODE_SIZE (to_mode))
+      && (GET_MODE_PRECISION (GET_MODE (SUBREG_REG (from)))
+	  >= GET_MODE_PRECISION (to_mode))
       && SUBREG_PROMOTED_UNSIGNED_P (from) == unsignedp)
     from = gen_lowpart (to_mode, from), from_mode = to_mode;
 
@@ -478,8 +478,8 @@  convert_move (rtx to, rtx from, int unsi
   /* Now both modes are integers.  */
 
   /* Handle expanding beyond a word.  */
-  if (GET_MODE_BITSIZE (from_mode) < GET_MODE_BITSIZE (to_mode)
-      && GET_MODE_BITSIZE (to_mode) > BITS_PER_WORD)
+  if (GET_MODE_PRECISION (from_mode) < GET_MODE_PRECISION (to_mode)
+      && GET_MODE_PRECISION (to_mode) > BITS_PER_WORD)
     {
       rtx insns;
       rtx lowpart;
@@ -503,7 +503,7 @@  convert_move (rtx to, rtx from, int unsi
 	  return;
 	}
       /* Next, try converting via full word.  */
-      else if (GET_MODE_BITSIZE (from_mode) < BITS_PER_WORD
+      else if (GET_MODE_PRECISION (from_mode) < BITS_PER_WORD
 	       && ((code = can_extend_p (to_mode, word_mode, unsignedp))
 		   != CODE_FOR_nothing))
 	{
@@ -529,7 +529,7 @@  convert_move (rtx to, rtx from, int unsi
 	from = force_reg (from_mode, from);
 
       /* Get a copy of FROM widened to a word, if necessary.  */
-      if (GET_MODE_BITSIZE (from_mode) < BITS_PER_WORD)
+      if (GET_MODE_PRECISION (from_mode) < BITS_PER_WORD)
 	lowpart_mode = word_mode;
       else
 	lowpart_mode = from_mode;
@@ -567,8 +567,8 @@  convert_move (rtx to, rtx from, int unsi
     }
 
   /* Truncating multi-word to a word or less.  */
-  if (GET_MODE_BITSIZE (from_mode) > BITS_PER_WORD
-      && GET_MODE_BITSIZE (to_mode) <= BITS_PER_WORD)
+  if (GET_MODE_PRECISION (from_mode) > BITS_PER_WORD
+      && GET_MODE_PRECISION (to_mode) <= BITS_PER_WORD)
     {
       if (!((MEM_P (from)
 	     && ! MEM_VOLATILE_P (from)
@@ -603,7 +603,7 @@  convert_move (rtx to, rtx from, int unsi
     }
 
   /* Handle extension.  */
-  if (GET_MODE_BITSIZE (to_mode) > GET_MODE_BITSIZE (from_mode))
+  if (GET_MODE_PRECISION (to_mode) > GET_MODE_PRECISION (from_mode))
     {
       /* Convert directly if that works.  */
       if ((code = can_extend_p (to_mode, from_mode, unsignedp))
@@ -635,8 +635,8 @@  convert_move (rtx to, rtx from, int unsi
 
 	  /* No suitable intermediate mode.
 	     Generate what we need with	shifts.  */
-	  shift_amount = (GET_MODE_BITSIZE (to_mode)
-			  - GET_MODE_BITSIZE (from_mode));
+	  shift_amount = (GET_MODE_PRECISION (to_mode)
+			  - GET_MODE_PRECISION (from_mode));
 	  from = gen_lowpart (to_mode, force_reg (from_mode, from));
 	  tmp = expand_shift (LSHIFT_EXPR, to_mode, from, shift_amount,
 			      to, unsignedp);
@@ -664,7 +664,7 @@  convert_move (rtx to, rtx from, int unsi
      ??? Code above formerly short-circuited this, for most integer
      mode pairs, with a force_reg in from_mode followed by a recursive
      call to this routine.  Appears always to have been wrong.  */
-  if (GET_MODE_BITSIZE (to_mode) < GET_MODE_BITSIZE (from_mode))
+  if (GET_MODE_PRECISION (to_mode) < GET_MODE_PRECISION (from_mode))
     {
       rtx temp = force_reg (to_mode, gen_lowpart (to_mode, from));
       emit_move_insn (to, temp);
@@ -742,11 +742,11 @@  convert_modes (enum machine_mode mode, e
      wider than HOST_BITS_PER_WIDE_INT, we must be narrowing the operand.  */
 
   if ((CONST_INT_P (x)
-       && GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT)
+       && GET_MODE_PRECISION (mode) <= HOST_BITS_PER_WIDE_INT)
       || (GET_MODE_CLASS (mode) == MODE_INT
 	  && GET_MODE_CLASS (oldmode) == MODE_INT
 	  && (GET_CODE (x) == CONST_DOUBLE
-	      || (GET_MODE_SIZE (mode) <= GET_MODE_SIZE (oldmode)
+	      || (GET_MODE_PRECISION (mode) <= GET_MODE_PRECISION (oldmode)
 		  && ((MEM_P (x) && ! MEM_VOLATILE_P (x)
 		       && direct_load[(int) mode])
 		      || (REG_P (x)
@@ -759,7 +759,7 @@  convert_modes (enum machine_mode mode, e
 	 X does not need sign- or zero-extension.   This may not be
 	 the case, but it's the best we can do.  */
       if (CONST_INT_P (x) && oldmode != VOIDmode
-	  && GET_MODE_SIZE (mode) > GET_MODE_SIZE (oldmode))
+	  && GET_MODE_PRECISION (mode) > GET_MODE_PRECISION (oldmode))
 	{
 	  HOST_WIDE_INT val = INTVAL (x);
 
@@ -4279,7 +4279,7 @@  expand_assignment (tree to, tree from, b
       if (!MEM_P (to_rtx)
 	  && GET_MODE (to_rtx) != BLKmode
 	  && (unsigned HOST_WIDE_INT) bitpos
-	     >= GET_MODE_BITSIZE (GET_MODE (to_rtx)))
+	     >= GET_MODE_PRECISION (GET_MODE (to_rtx)))
 	{
 	  expand_normal (from);
 	  result = NULL;
@@ -7476,7 +7476,7 @@  expand_expr_real_2 (sepops ops, rtx targ
 	  if (modifier == EXPAND_STACK_PARM)
 	    target = 0;
 	  if (TREE_CODE (treeop0) == INTEGER_CST
-	      && GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT
+	      && GET_MODE_PRECISION (mode) <= HOST_BITS_PER_WIDE_INT
 	      && TREE_CONSTANT (treeop1))
 	    {
 	      rtx constant_part;
@@ -7498,7 +7498,7 @@  expand_expr_real_2 (sepops ops, rtx targ
 	    }
 
 	  else if (TREE_CODE (treeop1) == INTEGER_CST
-		   && GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT
+		   && GET_MODE_PRECISION (mode) <= HOST_BITS_PER_WIDE_INT
 		   && TREE_CONSTANT (treeop0))
 	    {
 	      rtx constant_part;
@@ -8968,7 +8968,7 @@  expand_expr_real_1 (tree exp, rtx target
 		   we can't do this optimization.  */
 		&& (! DECL_BIT_FIELD (field)
 		    || ((GET_MODE_CLASS (DECL_MODE (field)) == MODE_INT)
-			&& (GET_MODE_BITSIZE (DECL_MODE (field))
+			&& (GET_MODE_PRECISION (DECL_MODE (field))
 			    <= HOST_BITS_PER_WIDE_INT))))
 	      {
 		if (DECL_BIT_FIELD (field)
@@ -8987,7 +8987,7 @@  expand_expr_real_1 (tree exp, rtx target
 		      }
 		    else
 		      {
-			int count = GET_MODE_BITSIZE (imode) - bitsize;
+			int count = GET_MODE_PRECISION (imode) - bitsize;
 
 			op0 = expand_shift (LSHIFT_EXPR, imode, op0, count,
 					    target, 0);
@@ -9431,7 +9431,8 @@  expand_expr_real_1 (tree exp, rtx target
       /* If neither mode is BLKmode, and both modes are the same size
 	 then we can use gen_lowpart.  */
       else if (mode != BLKmode && GET_MODE (op0) != BLKmode
-	       && GET_MODE_SIZE (mode) == GET_MODE_SIZE (GET_MODE (op0))
+	       && (GET_MODE_PRECISION (mode)
+		   == GET_MODE_PRECISION (GET_MODE (op0)))
 	       && !COMPLEX_MODE_P (GET_MODE (op0)))
 	{
 	  if (GET_CODE (op0) == SUBREG)
@@ -9754,7 +9755,7 @@  reduce_to_bit_field_precision (rtx exp,
     }
   else
     {
-      int count = GET_MODE_BITSIZE (GET_MODE (exp)) - prec;
+      int count = GET_MODE_PRECISION (GET_MODE (exp)) - prec;
       exp = expand_shift (LSHIFT_EXPR, GET_MODE (exp),
 			  exp, count, target, 0);
       return expand_shift (RSHIFT_EXPR, GET_MODE (exp),
Index: gcc/expmed.c
===================================================================
--- gcc/expmed.c.orig
+++ gcc/expmed.c
@@ -2090,7 +2090,7 @@  expand_shift_1 (enum tree_code code, enu
   if (code == LSHIFT_EXPR
       && CONST_INT_P (op1)
       && INTVAL (op1) > 0
-      && INTVAL (op1) < GET_MODE_BITSIZE (mode)
+      && INTVAL (op1) < GET_MODE_PRECISION (mode)
       && INTVAL (op1) < MAX_BITS_PER_WORD
       && shift_cost[speed][mode][INTVAL (op1)] > INTVAL (op1) * add_cost[speed][mode]
       && shift_cost[speed][mode][INTVAL (op1)] != MAX_COST)
@@ -2146,7 +2146,7 @@  expand_shift_1 (enum tree_code code, enu
 	      else
 		other_amount
 		  = simplify_gen_binary (MINUS, GET_MODE (op1),
-					 GEN_INT (GET_MODE_BITSIZE (mode)),
+					 GEN_INT (GET_MODE_PRECISION (mode)),
 					 op1);
 
 	      shifted = force_reg (mode, shifted);
Index: gcc/cfgexpand.c
===================================================================
--- gcc/cfgexpand.c.orig
+++ gcc/cfgexpand.c
@@ -2303,7 +2303,7 @@  convert_debug_memory_address (enum machi
   if (GET_MODE (x) == mode || GET_MODE (x) == VOIDmode)
     return x;
 
-  if (GET_MODE_BITSIZE (mode) < GET_MODE_BITSIZE (xmode))
+  if (GET_MODE_PRECISION (mode) < GET_MODE_PRECISION (xmode))
     x = simplify_gen_subreg (mode, x, xmode,
 			     subreg_lowpart_offset
 			     (mode, xmode));
@@ -2558,7 +2558,7 @@  expand_debug_expr (tree exp)
 	      op0 = simplify_gen_unary (FIX, mode, op0, inner_mode);
 	  }
 	else if (CONSTANT_P (op0)
-		 || GET_MODE_BITSIZE (mode) <= GET_MODE_BITSIZE (inner_mode))
+		 || GET_MODE_PRECISION (mode) <= GET_MODE_PRECISION (inner_mode))
 	  op0 = simplify_gen_subreg (mode, op0, inner_mode,
 				     subreg_lowpart_offset (mode,
 							    inner_mode));
Index: gcc/convert.c
===================================================================
--- gcc/convert.c.orig
+++ gcc/convert.c
@@ -583,7 +583,7 @@  convert_to_integer (tree type, tree expr
 	     be cleared.  */
 	  if (TYPE_UNSIGNED (type) != TYPE_UNSIGNED (TREE_TYPE (expr))
 	      && (TYPE_PRECISION (TREE_TYPE (expr))
-		  != GET_MODE_BITSIZE (TYPE_MODE (TREE_TYPE (expr)))))
+		  != GET_MODE_PRECISION (TYPE_MODE (TREE_TYPE (expr)))))
 	    code = CONVERT_EXPR;
 	  else
 	    code = NOP_EXPR;
@@ -602,7 +602,7 @@  convert_to_integer (tree type, tree expr
 	 type corresponding to its mode, then do a nop conversion
 	 to TYPE.  */
       else if (TREE_CODE (type) == ENUMERAL_TYPE
-	       || outprec != GET_MODE_BITSIZE (TYPE_MODE (type)))
+	       || outprec != GET_MODE_PRECISION (TYPE_MODE (type)))
 	return build1 (NOP_EXPR, type,
 		       convert (lang_hooks.types.type_for_mode
 				(TYPE_MODE (type), TYPE_UNSIGNED (type)),