===================================================================
@@ -199,6 +199,12 @@ (define_attr "move_type"
shift_shift,lui_movf"
(const_string "unknown"))
+(define_attr "alu_type" "unknown,add,sub"
+ (const_string "unknown"))
+
+(define_attr "logical_type" "unknown,not,and,or,xor"
+ (const_string "unknown"))
+
;; Main data type used by the insn
(define_attr "mode" "unknown,none,QI,HI,SI,DI,TI,SF,DF,TF,FPSW"
(const_string "unknown"))
@@ -275,6 +281,14 @@ (define_attr "type"
(cond [(eq_attr "jal" "!unset") (const_string "call")
(eq_attr "got" "load") (const_string "load")
+ (eq_attr "alu_type" "add") (const_string "arith")
+ (eq_attr "alu_type" "sub") (const_string "arith")
+
+ (eq_attr "logical_type" "not") (const_string "logical")
+ (eq_attr "logical_type" "and") (const_string "logical")
+ (eq_attr "logical_type" "or") (const_string "logical")
+ (eq_attr "logical_type" "xor") (const_string "logical")
+
;; If a doubleword move uses these expensive instructions,
;; it is usually better to schedule them in the same way
;; as the singleword form, rather than as "multi".
@@ -978,7 +992,7 @@ (define_insn "*add<mode>3"
"@
<d>addu\t%0,%1,%2
<d>addiu\t%0,%1,%2"
- [(set_attr "type" "arith")
+ [(set_attr "alu_type" "add")
(set_attr "mode" "<MODE>")])
(define_insn "*add<mode>3_mips16"
@@ -992,7 +1006,7 @@ (define_insn "*add<mode>3_mips16"
<d>addiu\t%0,%2
<d>addiu\t%0,%1,%2
<d>addu\t%0,%1,%2"
- [(set_attr "type" "arith")
+ [(set_attr "alu_type" "add")
(set_attr "mode" "<MODE>")
(set_attr_alternative "length"
[(if_then_else (match_operand 2 "m16_simm8_8")
@@ -1130,7 +1144,7 @@ (define_insn "*addsi3_extended"
"@
addu\t%0,%1,%2
addiu\t%0,%1,%2"
- [(set_attr "type" "arith")
+ [(set_attr "alu_type" "add")
(set_attr "mode" "SI")])
;; Split this insn so that the addiu splitters can have a crack at it.
@@ -1145,7 +1159,7 @@ (define_insn_and_split "*addsi3_extended
"&& reload_completed"
[(set (match_dup 3) (plus:SI (match_dup 1) (match_dup 2)))]
{ operands[3] = gen_lowpart (SImode, operands[0]); }
- [(set_attr "type" "arith")
+ [(set_attr "alu_type" "add")
(set_attr "mode" "SI")
(set_attr "extended_mips16" "yes")])
@@ -1159,7 +1173,7 @@ (define_insn "*baddu_si_eb"
(match_operand:SI 2 "register_operand" "d")) 3)))]
"ISA_HAS_BADDU && BYTES_BIG_ENDIAN"
"baddu\\t%0,%1,%2"
- [(set_attr "type" "arith")])
+ [(set_attr "alu_type" "add")])
(define_insn "*baddu_si_el"
[(set (match_operand:SI 0 "register_operand" "=d")
@@ -1169,7 +1183,7 @@ (define_insn "*baddu_si_el"
(match_operand:SI 2 "register_operand" "d")) 0)))]
"ISA_HAS_BADDU && !BYTES_BIG_ENDIAN"
"baddu\\t%0,%1,%2"
- [(set_attr "type" "arith")])
+ [(set_attr "alu_type" "add")])
(define_insn "*baddu_di<mode>"
[(set (match_operand:GPR 0 "register_operand" "=d")
@@ -1179,7 +1193,7 @@ (define_insn "*baddu_di<mode>"
(match_operand:DI 2 "register_operand" "d")))))]
"ISA_HAS_BADDU && TARGET_64BIT"
"baddu\\t%0,%1,%2"
- [(set_attr "type" "arith")])
+ [(set_attr "alu_type" "add")])
;;
;; ....................
@@ -1204,7 +1218,7 @@ (define_insn "sub<mode>3"
(match_operand:GPR 2 "register_operand" "d")))]
""
"<d>subu\t%0,%1,%2"
- [(set_attr "type" "arith")
+ [(set_attr "alu_type" "sub")
(set_attr "mode" "<MODE>")])
(define_insn "*subsi3_extended"
@@ -1214,7 +1228,7 @@ (define_insn "*subsi3_extended"
(match_operand:SI 2 "register_operand" "d"))))]
"TARGET_64BIT"
"subu\t%0,%1,%2"
- [(set_attr "type" "arith")
+ [(set_attr "alu_type" "sub")
(set_attr "mode" "DI")])
;;
@@ -2483,7 +2497,7 @@ (define_insn "negsi2"
else
return "subu\t%0,%.,%1";
}
- [(set_attr "type" "arith")
+ [(set_attr "alu_type" "sub")
(set_attr "mode" "SI")])
(define_insn "negdi2"
@@ -2491,7 +2505,7 @@ (define_insn "negdi2"
(neg:DI (match_operand:DI 1 "register_operand" "d")))]
"TARGET_64BIT && !TARGET_MIPS16"
"dsubu\t%0,%.,%1"
- [(set_attr "type" "arith")
+ [(set_attr "alu_type" "sub")
(set_attr "mode" "DI")])
;; neg.fmt is an arithmetic instruction and treats all NaN inputs as
@@ -2516,7 +2530,7 @@ (define_insn "one_cmpl<mode>2"
else
return "nor\t%0,%.,%1";
}
- [(set_attr "type" "logical")
+ [(set_attr "logical_type" "not")
(set_attr "mode" "<MODE>")])
;;
@@ -2638,7 +2652,7 @@ (define_insn "*ior<mode>3"
"@
or\t%0,%1,%2
ori\t%0,%1,%x2"
- [(set_attr "type" "logical")
+ [(set_attr "logical_type" "or")
(set_attr "mode" "<MODE>")])
(define_insn "*ior<mode>3_mips16"
@@ -2647,7 +2661,7 @@ (define_insn "*ior<mode>3_mips16"
(match_operand:GPR 2 "register_operand" "d")))]
"TARGET_MIPS16"
"or\t%0,%2"
- [(set_attr "type" "logical")
+ [(set_attr "logical_type" "or")
(set_attr "mode" "<MODE>")])
(define_expand "xor<mode>3"
@@ -2665,7 +2679,7 @@ (define_insn ""
"@
xor\t%0,%1,%2
xori\t%0,%1,%x2"
- [(set_attr "type" "logical")
+ [(set_attr "logical_type" "or")
(set_attr "mode" "<MODE>")])
(define_insn ""
@@ -2678,6 +2692,7 @@ (define_insn ""
cmpi\t%1,%2
cmp\t%1,%2"
[(set_attr "type" "logical,arith,arith")
+ (set_attr "logical_type" "or,unknown,unknown")
(set_attr "mode" "<MODE>")
(set_attr_alternative "length"
[(const_int 4)
@@ -2692,7 +2707,7 @@ (define_insn "*nor<mode>3"
(not:GPR (match_operand:GPR 2 "register_operand" "d"))))]
"!TARGET_MIPS16"
"nor\t%0,%1,%2"
- [(set_attr "type" "logical")
+ [(set_attr "logical_type" "or")
(set_attr "mode" "<MODE>")])
;;
@@ -2910,7 +2925,7 @@ (define_insn "*zero_extend<GPR:mode>_tru
operands[2] = GEN_INT (GET_MODE_MASK (<SHORT:MODE>mode));
return "andi\t%0,%1,%x2";
}
- [(set_attr "type" "logical")
+ [(set_attr "logical_type" "and")
(set_attr "mode" "<GPR:MODE>")])
(define_insn "*zero_extendhi_truncqi"
@@ -2919,7 +2934,7 @@ (define_insn "*zero_extendhi_truncqi"
(truncate:QI (match_operand:DI 1 "register_operand" "d"))))]
"TARGET_64BIT && !TARGET_MIPS16"
"andi\t%0,%1,0xff"
- [(set_attr "type" "logical")
+ [(set_attr "logical_type" "and")
(set_attr "mode" "HI")])
;;
@@ -3851,7 +3866,7 @@ (define_insn "*low<mode>"
(match_operand:P 2 "immediate_operand" "")))]
"!TARGET_MIPS16"
"<d>addiu\t%0,%1,%R2"
- [(set_attr "type" "arith")
+ [(set_attr "alu_type" "add")
(set_attr "mode" "<MODE>")])
(define_insn "*low<mode>_mips16"
@@ -3860,7 +3875,7 @@ (define_insn "*low<mode>_mips16"
(match_operand:P 2 "immediate_operand" "")))]
"TARGET_MIPS16"
"<d>addiu\t%0,%R2"
- [(set_attr "type" "arith")
+ [(set_attr "alu_type" "add")
(set_attr "mode" "<MODE>")
(set_attr "extended_mips16" "yes")])