[SH2A] : Add movml instruction

diff -uprN ORIG/trunk/gcc/config/sh/sh.c trunk/gcc/config/sh/sh.c
--- ORIG/trunk/gcc/config/sh/sh.c	2010-07-17 10:31:31.000000000 +0900
+++ trunk/gcc/config/sh/sh.c	2010-08-24 20:01:37.000000000 +0900
@@ -6407,9 +6407,50 @@  push_regs (HARD_REG_SET *mask, int inter
 
   /* Push banked registers last to improve delay slot opportunities.  */
   if (interrupt_handler)
-    for (i = FIRST_BANKED_REG; i <= LAST_BANKED_REG; i++)
-      if (TEST_HARD_REG_BIT (*mask, i))
-	push (i);
+    {
+      bool use_movml = false;
+
+      if (TARGET_SH2A)
+	{
+	  unsigned int count = 0;
+
+	  for (i = FIRST_BANKED_REG; i <= LAST_BANKED_REG; i++)
+	    if (TEST_HARD_REG_BIT (*mask, i))
+	      count++;
+	    else
+	      break;
+
+	  /* Use movml when all banked registers are pushed.  */
+	  if (count == LAST_BANKED_REG - FIRST_BANKED_REG + 1)
+	    use_movml = true;
+	}
+
+      if (use_movml)
+	{
+	  rtx x, mem, reg, set;
+	  rtx sp_reg = gen_rtx_REG (SImode, STACK_POINTER_REGNUM);
+
+	  /* We must avoid scheduling multiple store insn with another
+	     insns.  */
+	  emit_insn (gen_blockage ());
+	  x = gen_movml_push_banked (sp_reg);
+	  x = frame_insn (x);
+	  for (i = FIRST_BANKED_REG; i <= LAST_BANKED_REG; i++)
+	    {
+	      mem = gen_rtx_MEM (SImode, plus_constant (sp_reg, i * 4));
+	      reg = gen_rtx_REG (SImode, i);
+	      add_reg_note (x, REG_CFA_OFFSET, gen_rtx_SET (SImode, mem, reg));
+	    }
+
+	  set = gen_rtx_SET (SImode, sp_reg, plus_constant (sp_reg, - 32));
+	  add_reg_note (x, REG_CFA_ADJUST_CFA, set);
+	  emit_insn (gen_blockage ());
+	}
+      else
+	for (i = FIRST_BANKED_REG; i <= LAST_BANKED_REG; i++)
+	  if (TEST_HARD_REG_BIT (*mask, i))
+	    push (i);
+    }
 
   /* Don't push PR register for an ISR with RESBANK attribute assigned.  */
   if (TEST_HARD_REG_BIT (*mask, PR_REG) && !sh_cfun_resbank_handler_p ())
@@ -7347,9 +7388,37 @@  sh_expand_epilogue (bool sibcall_p)
 	 delay slot. RTE switches banks before the ds instruction.  */
       if (current_function_interrupt)
 	{
-	  for (i = LAST_BANKED_REG; i >= FIRST_BANKED_REG; i--)
-	    if (TEST_HARD_REG_BIT (live_regs_mask, i))
-	      pop (i);
+	  bool use_movml = false;
+
+	  if (TARGET_SH2A)
+	    {
+	      unsigned int count = 0;
+
+	      for (i = FIRST_BANKED_REG; i <= LAST_BANKED_REG; i++)
+		if (TEST_HARD_REG_BIT (live_regs_mask, i))
+		  count++;
+		else
+		  break;
+
+	      /* Use movml when all banked register are poped.  */
+	      if (count == LAST_BANKED_REG - FIRST_BANKED_REG + 1)
+		use_movml = true;
+	    }
+
+	  if (use_movml)
+	    {
+	      rtx sp_reg = gen_rtx_REG (SImode, STACK_POINTER_REGNUM);
+
+	      /* We must avoid scheduling multiple load insn with another
+		 insns.  */
+	      emit_insn (gen_blockage ());
+	      emit_insn (gen_movml_pop_banked (sp_reg));
+	      emit_insn (gen_blockage ());
+	    }
+	  else
+	    for (i = LAST_BANKED_REG; i >= FIRST_BANKED_REG; i--)
+	      if (TEST_HARD_REG_BIT (live_regs_mask, i))
+		pop (i);
 
 	  last_reg = FIRST_PSEUDO_REGISTER - LAST_BANKED_REG - 1;
 	}
diff -uprN ORIG/trunk/gcc/config/sh/sh.md trunk/gcc/config/sh/sh.md
--- ORIG/trunk/gcc/config/sh/sh.md	2010-07-13 23:39:56.000000000 +0900
+++ trunk/gcc/config/sh/sh.md	2010-08-24 20:01:37.000000000 +0900
@@ -9216,6 +9216,39 @@  mov.l\\t1f,r0\\n\\
   ""
   [(set_attr "length" "0")])
 
+;; Define movml instructions for SH2A target.  Currently they are
+;; used to push and pop all banked registers only.
+
+(define_insn "movml_push_banked"
+  [(set (match_operand:SI 0 "register_operand" "=r")
+	  (plus (match_dup 0) (const_int -32)))
+   (set (mem:SI (plus:SI (match_dup 0) (const_int 28))) (reg:SI R7_REG))
+   (set (mem:SI (plus:SI (match_dup 0) (const_int 24))) (reg:SI R6_REG))
+   (set (mem:SI (plus:SI (match_dup 0) (const_int 20))) (reg:SI R5_REG))
+   (set (mem:SI (plus:SI (match_dup 0) (const_int 16))) (reg:SI R4_REG))
+   (set (mem:SI (plus:SI (match_dup 0) (const_int 12))) (reg:SI R3_REG))
+   (set (mem:SI (plus:SI (match_dup 0) (const_int 8))) (reg:SI R2_REG))
+   (set (mem:SI (plus:SI (match_dup 0) (const_int 4))) (reg:SI R1_REG))
+   (set (mem:SI (plus:SI (match_dup 0) (const_int 0))) (reg:SI R0_REG))]
+  "TARGET_SH2A && REGNO (operands[0]) == 15"
+  "movml.l\tr7,@-r15"
+  [(set_attr "in_delay_slot" "no")])
+
+(define_insn "movml_pop_banked"
+  [(set (match_operand:SI 0 "register_operand" "=r")
+	  (plus (match_dup 0) (const_int 32)))
+   (set (reg:SI R0_REG) (mem:SI (plus:SI (match_dup 0) (const_int -32))))
+   (set (reg:SI R1_REG) (mem:SI (plus:SI (match_dup 0) (const_int -28))))
+   (set (reg:SI R2_REG) (mem:SI (plus:SI (match_dup 0) (const_int -24))))
+   (set (reg:SI R3_REG) (mem:SI (plus:SI (match_dup 0) (const_int -20))))
+   (set (reg:SI R4_REG) (mem:SI (plus:SI (match_dup 0) (const_int -16))))
+   (set (reg:SI R5_REG) (mem:SI (plus:SI (match_dup 0) (const_int -12))))
+   (set (reg:SI R6_REG) (mem:SI (plus:SI (match_dup 0) (const_int -8))))
+   (set (reg:SI R7_REG) (mem:SI (plus:SI (match_dup 0) (const_int -4))))]
+  "TARGET_SH2A && REGNO (operands[0]) == 15"
+  "movml.l\t@r15+,r7"
+  [(set_attr "in_delay_slot" "no")])
+
 ;; ------------------------------------------------------------------------
 ;; Scc instructions
 ;; ------------------------------------------------------------------------
diff -uprN ORIG/trunk/gcc/testsuite/gcc.dg/attr-isr.c trunk/gcc/testsuite/gcc.dg/attr-isr.c
--- ORIG/trunk/gcc/testsuite/gcc.dg/attr-isr.c	2007-08-15 09:26:27.000000000 +0900
+++ trunk/gcc/testsuite/gcc.dg/attr-isr.c	2010-08-24 20:01:37.000000000 +0900
@@ -1,4 +1,5 @@ 
-/* { dg-do compile { target { { sh-*-* sh[1234ble]*-*-* } && nonpic } } } */
+/* { dg-do compile { target { { { sh-*-* sh[1234ble]*-*-* } && { ! sh2a*-*-* } } && nonpic } } } */
+/* { dg-skip-if "" { "sh*-*-*" } { "-m2a*" } { "" } } */
 /* { dg-options "-O" } */
 extern void foo ();