@@ -530,24 +530,28 @@ int main(int argc, char *argv[])
goto out_shutdown;
}
- /* Always verify write operations unless -n is used. */
- if (write_it && !dont_verify_it)
- verify_it = 1;
+ if (layoutfile)
+ fl_layout_set(fill_flash, get_global_layout());
- /* Map the selected flash chip again. */
- if (map_flash(fill_flash) != 0) {
- ret = 1;
- goto out_shutdown;
- }
+ fl_flag_set(fill_flash, FL_FLAG_FORCE, !!force);
+ fl_flag_set(fill_flash, FL_FLAG_FORCE_BOARDMISMATCH, !!force_boardmismatch);
+ fl_flag_set(fill_flash, FL_FLAG_VERIFY_AFTER_WRITE, !dont_verify_it);
+ fl_flag_set(fill_flash, FL_FLAG_VERIFY_WHOLE_CHIP, true);
/* FIXME: We should issue an unconditional chip reset here. This can be
* done once we have a .reset function in struct flashchip.
* Give the chip time to settle.
*/
programmer_delay(100000);
- ret |= doit(fill_flash, force, filename, read_it, write_it, erase_it, verify_it);
+ if (read_it)
+ ret = do_read(fill_flash, filename);
+ else if (erase_it)
+ ret = do_erase(fill_flash);
+ else if (write_it)
+ ret = do_write(fill_flash, filename);
+ else if (verify_it)
+ ret = do_verify(fill_flash, filename);
- unmap_flash(fill_flash);
out_shutdown:
programmer_shutdown();
out:
@@ -283,9 +283,12 @@ void print_buildinfo(void);
void print_banner(void);
void list_programmers_linebreak(int startcol, int cols, int paren);
int selfcheck(void);
-int doit(struct flashctx *flash, int force, const char *filename, int read_it, int write_it, int erase_it, int verify_it);
int read_buf_from_file(unsigned char *buf, unsigned long size, const char *filename);
int write_buf_to_file(const unsigned char *buf, unsigned long size, const char *filename);
+int do_read(struct flashctx *, const char *filename);
+int do_erase(struct flashctx *);
+int do_write(struct flashctx *, const char *const filename);
+int do_verify(struct flashctx *, const char *const filename);
/* Something happened that shouldn't happen, but we can go on. */
#define ERROR_NONFATAL 0x100
@@ -1365,6 +1365,7 @@ out:
#endif
}
+static int read_by_layout(struct flashctx *, void *);
int read_flash_to_file(struct flashctx *flash, const char *filename)
{
unsigned long size = flash->chip->total_size * 1024;
@@ -1382,7 +1383,7 @@ int read_flash_to_file(struct flashctx *flash, const char *filename)
ret = 1;
goto out_free;
}
- if (flash->chip->read(flash, buf, 0, size)) {
+ if (read_by_layout(flash, buf)) {
msg_cerr("Read operation failed!\n");
ret = 1;
goto out_free;
@@ -1461,97 +1462,6 @@ static int selfcheck_eraseblocks(const struct flashchip *chip)
return ret;
}
-static int erase_and_write_block_helper(struct flashctx *flash,
- unsigned int start, unsigned int len,
- uint8_t *curcontents,
- uint8_t *newcontents,
- int (*erasefn) (struct flashctx *flash,
- unsigned int addr,
- unsigned int len))
-{
- unsigned int starthere = 0, lenhere = 0;
- int ret = 0, skip = 1, writecount = 0;
- enum write_granularity gran = flash->chip->gran;
-
- /* curcontents and newcontents are opaque to walk_eraseregions, and
- * need to be adjusted here to keep the impression of proper abstraction
- */
- curcontents += start;
- newcontents += start;
- msg_cdbg(":");
- if (need_erase(curcontents, newcontents, len, gran)) {
- msg_cdbg("E");
- ret = erasefn(flash, start, len);
- if (ret)
- return ret;
- if (check_erased_range(flash, start, len)) {
- msg_cerr("ERASE FAILED!\n");
- return -1;
- }
- /* Erase was successful. Adjust curcontents. */
- memset(curcontents, 0xff, len);
- skip = 0;
- }
- /* get_next_write() sets starthere to a new value after the call. */
- while ((lenhere = get_next_write(curcontents + starthere,
- newcontents + starthere,
- len - starthere, &starthere, gran))) {
- if (!writecount++)
- msg_cdbg("W");
- /* Needs the partial write function signature. */
- ret = flash->chip->write(flash, newcontents + starthere,
- start + starthere, lenhere);
- if (ret)
- return ret;
- starthere += lenhere;
- skip = 0;
- }
- if (skip)
- msg_cdbg("S");
- else
- all_skipped = false;
- return ret;
-}
-
-static int walk_eraseregions(struct flashctx *flash, int erasefunction,
- int (*do_something) (struct flashctx *flash,
- unsigned int addr,
- unsigned int len,
- uint8_t *param1,
- uint8_t *param2,
- int (*erasefn) (
- struct flashctx *flash,
- unsigned int addr,
- unsigned int len)),
- void *param1, void *param2)
-{
- int i, j;
- unsigned int start = 0;
- unsigned int len;
- struct block_eraser eraser = flash->chip->block_erasers[erasefunction];
-
- for (i = 0; i < NUM_ERASEREGIONS; i++) {
- /* count==0 for all automatically initialized array
- * members so the loop below won't be executed for them.
- */
- len = eraser.eraseblocks[i].size;
- for (j = 0; j < eraser.eraseblocks[i].count; j++) {
- /* Print this for every block except the first one. */
- if (i || j)
- msg_cdbg(", ");
- msg_cdbg("0x%06x-0x%06x", start,
- start + len - 1);
- if (do_something(flash, start, len, param1, param2,
- eraser.block_erase)) {
- return 1;
- }
- start += len;
- }
- }
- msg_cdbg("\n");
- return 0;
-}
-
static int check_block_eraser(const struct flashctx *flash, int k, int log)
{
struct block_eraser eraser = flash->chip->block_erasers[k];
@@ -1577,71 +1487,6 @@ static int check_block_eraser(const struct flashctx *flash, int k, int log)
return 0;
}
-int erase_and_write_flash(struct flashctx *flash, uint8_t *oldcontents, uint8_t *newcontents)
-{
- int k, ret = 1;
- uint8_t *curcontents;
- unsigned long size = flash->chip->total_size * 1024;
- unsigned int usable_erasefunctions = count_usable_erasers(flash);
-
- msg_cinfo("Erasing and writing flash chip... ");
- curcontents = malloc(size);
- if (!curcontents) {
- msg_gerr("Out of memory!\n");
- exit(1);
- }
- /* Copy oldcontents to curcontents to avoid clobbering oldcontents. */
- memcpy(curcontents, oldcontents, size);
-
- for (k = 0; k < NUM_ERASEFUNCTIONS; k++) {
- if (k != 0)
- msg_cinfo("Looking for another erase function.\n");
- if (!usable_erasefunctions) {
- msg_cinfo("No usable erase functions left.\n");
- break;
- }
- msg_cdbg("Trying erase function %i... ", k);
- if (check_block_eraser(flash, k, 1))
- continue;
- usable_erasefunctions--;
- ret = walk_eraseregions(flash, k, &erase_and_write_block_helper,
- curcontents, newcontents);
- /* If everything is OK, don't try another erase function. */
- if (!ret)
- break;
- /* Write/erase failed, so try to find out what the current chip
- * contents are. If no usable erase functions remain, we can
- * skip this: the next iteration will break immediately anyway.
- */
- if (!usable_erasefunctions)
- continue;
- /* Reading the whole chip may take a while, inform the user even
- * in non-verbose mode.
- */
- msg_cinfo("Reading current flash chip contents... ");
- if (flash->chip->read(flash, curcontents, 0, size)) {
- /* Now we are truly screwed. Read failed as well. */
- msg_cerr("Can't read anymore! Aborting.\n");
- /* We have no idea about the flash chip contents, so
- * retrying with another erase function is pointless.
- */
- break;
- }
- msg_cinfo("done. ");
- }
- /* Free the scratchpad. */
- free(curcontents);
-
- if (ret) {
- msg_cerr("FAILED!\n");
- } else {
- if (all_skipped)
- msg_cinfo("\nWarning: Chip content is identical to the requested image.\n");
- msg_cinfo("Erase/write done.\n");
- }
- return ret;
-}
-
/** @private */
static const struct fl_layout *get_layout(const struct flashctx *const flashctx,
struct fl_layout_single *const fallback)
@@ -2298,170 +2143,6 @@ int chip_safety_check(const struct flashctx *flash, int force, int read_it, int
return 0;
}
-/* This function signature is horrible. We need to design a better interface,
- * but right now it allows us to split off the CLI code.
- * Besides that, the function itself is a textbook example of abysmal code flow.
- */
-int doit(struct flashctx *flash, int force, const char *filename, int read_it,
- int write_it, int erase_it, int verify_it)
-{
- uint8_t *oldcontents;
- uint8_t *newcontents;
- int ret = 0;
- unsigned long size = flash->chip->total_size * 1024;
- int read_all_first = 1; /* FIXME: Make this configurable. */
-
- if (chip_safety_check(flash, force, read_it, write_it, erase_it, verify_it)) {
- msg_cerr("Aborting.\n");
- return 1;
- }
-
- if (normalize_romentries(flash)) {
- msg_cerr("Requested regions can not be handled. Aborting.\n");
- return 1;
- }
-
- /* Given the existence of read locks, we want to unlock for read,
- * erase and write.
- */
- if (flash->chip->unlock)
- flash->chip->unlock(flash);
-
- if (read_it) {
- return read_flash_to_file(flash, filename);
- }
-
- oldcontents = malloc(size);
- if (!oldcontents) {
- msg_gerr("Out of memory!\n");
- exit(1);
- }
- /* Assume worst case: All bits are 0. */
- memset(oldcontents, 0x00, size);
- newcontents = malloc(size);
- if (!newcontents) {
- msg_gerr("Out of memory!\n");
- exit(1);
- }
- /* Assume best case: All bits should be 1. */
- memset(newcontents, 0xff, size);
- /* Side effect of the assumptions above: Default write action is erase
- * because newcontents looks like a completely erased chip, and
- * oldcontents being completely 0x00 means we have to erase everything
- * before we can write.
- */
-
- if (erase_it) {
- /* FIXME: Do we really want the scary warning if erase failed?
- * After all, after erase the chip is either blank or partially
- * blank or it has the old contents. A blank chip won't boot,
- * so if the user wanted erase and reboots afterwards, the user
- * knows very well that booting won't work.
- */
- if (erase_and_write_flash(flash, oldcontents, newcontents)) {
- emergency_help_message();
- ret = 1;
- }
- goto out;
- }
-
- if (write_it || verify_it) {
- if (read_buf_from_file(newcontents, size, filename)) {
- ret = 1;
- goto out;
- }
-
-#if CONFIG_INTERNAL == 1
- if (programmer == PROGRAMMER_INTERNAL && cb_check_image(newcontents, size) < 0) {
- if (force_boardmismatch) {
- msg_pinfo("Proceeding anyway because user forced us to.\n");
- } else {
- msg_perr("Aborting. You can override this with "
- "-p internal:boardmismatch=force.\n");
- ret = 1;
- goto out;
- }
- }
-#endif
- }
-
- /* Read the whole chip to be able to check whether regions need to be
- * erased and to give better diagnostics in case write fails.
- * The alternative is to read only the regions which are to be
- * preserved, but in that case we might perform unneeded erase which
- * takes time as well.
- */
- if (read_all_first) {
- msg_cinfo("Reading old flash chip contents... ");
- if (flash->chip->read(flash, oldcontents, 0, size)) {
- ret = 1;
- msg_cinfo("FAILED.\n");
- goto out;
- }
- }
- msg_cinfo("done.\n");
-
- /* Build a new image taking the given layout into account. */
- if (build_new_image(flash, read_all_first, oldcontents, newcontents)) {
- msg_gerr("Could not prepare the data to be written, aborting.\n");
- ret = 1;
- goto out;
- }
-
- // ////////////////////////////////////////////////////////////
-
- if (write_it && erase_and_write_flash(flash, oldcontents, newcontents)) {
- msg_cerr("Uh oh. Erase/write failed. ");
- if (read_all_first) {
- msg_cerr("Checking if anything has changed.\n");
- msg_cinfo("Reading current flash chip contents... ");
- if (!flash->chip->read(flash, newcontents, 0, size)) {
- msg_cinfo("done.\n");
- if (!memcmp(oldcontents, newcontents, size)) {
- nonfatal_help_message();
- ret = 1;
- goto out;
- }
- msg_cerr("Apparently at least some data has changed.\n");
- } else
- msg_cerr("Can't even read anymore!\n");
- emergency_help_message();
- ret = 1;
- goto out;
- } else
- msg_cerr("\n");
- emergency_help_message();
- ret = 1;
- goto out;
- }
-
- /* Verify only if we either did not try to write (verify operation) or actually changed something. */
- if (verify_it && (!write_it || !all_skipped)) {
- msg_cinfo("Verifying flash... ");
-
- if (write_it) {
- /* Work around chips which need some time to calm down. */
- programmer_delay(1000*1000);
- ret = verify_range(flash, newcontents, 0, size);
- /* If we tried to write, and verification now fails, we
- * might have an emergency situation.
- */
- if (ret)
- emergency_help_message();
- } else {
- ret = compare_range(newcontents, oldcontents, 0, size);
- }
- if (!ret)
- msg_cinfo("VERIFIED.\n");
- }
-
-out:
- free(oldcontents);
- free(newcontents);
- return ret;
-}
-
-/** @private */
static int prepare_flash_access(struct flashctx *const flash,
const bool read_it, const bool write_it,
const bool erase_it, const bool verify_it)
@@ -2753,3 +2434,73 @@ _free_ret:
}
/** @} */ /* end fl-ops */
+
+int do_read(struct flashctx *const flash, const char *const filename)
+{
+ if (prepare_flash_access(flash, true, false, false, false))
+ return 1;
+
+ const int ret = read_flash_to_file(flash, filename);
+
+ unmap_flash(flash);
+
+ return ret;
+}
+
+int do_erase(struct flashctx *const flash)
+{
+ const int ret = fl_flash_erase(flash);
+
+ /* FIXME: Do we really want the scary warning if erase failed?
+ * After all, after erase the chip is either blank or partially
+ * blank or it has the old contents. A blank chip won't boot,
+ * so if the user wanted erase and reboots afterwards, the user
+ * knows very well that booting won't work.
+ */
+ if (ret)
+ emergency_help_message();
+
+ return ret;
+}
+
+int do_write(struct flashctx *const flash, const char *const filename)
+{
+ const size_t flash_size = flash->chip->total_size * 1024;
+ int ret = 1;
+
+ uint8_t *const newcontents = malloc(flash_size);
+ if (!newcontents) {
+ msg_gerr("Out of memory!\n");
+ goto _free_ret;
+ }
+
+ if (read_buf_from_file(newcontents, flash_size, filename))
+ goto _free_ret;
+
+ ret = fl_image_write(flash, newcontents, flash_size);
+
+_free_ret:
+ free(newcontents);
+ return ret;
+}
+
+int do_verify(struct flashctx *const flash, const char *const filename)
+{
+ const size_t flash_size = flash->chip->total_size * 1024;
+ int ret = 1;
+
+ uint8_t *const newcontents = malloc(flash_size);
+ if (!newcontents) {
+ msg_gerr("Out of memory!\n");
+ goto _free_ret;
+ }
+
+ if (read_buf_from_file(newcontents, flash_size, filename))
+ goto _free_ret;
+
+ ret = fl_image_verify(flash, newcontents, flash_size);
+
+_free_ret:
+ free(newcontents);
+ return ret;
+}
No words can describe this feeling. Signed-off-by: Nico Huber <nico.huber@secunet.com> --- cli_classic.c | 24 ++-- flash.h | 5 +- flashrom.c | 393 +++++++++++----------------------------------------------- 3 files changed, 90 insertions(+), 332 deletions(-)