deleted file mode 100644
@@ -1,102 +0,0 @@
-* ROHM BD70528 Power Management Integrated Circuit bindings
-
-BD70528MWV is an ultra-low quiescent current general purpose, single-chip,
-power management IC for battery-powered portable devices. The IC
-integrates 3 ultra-low current consumption buck converters, 3 LDOs and 2
-LED Drivers. Also included are 4 GPIOs, a real-time clock (RTC), a 32kHz
-clock gate, high-accuracy VREF for use with an external ADC, flexible
-dual-input power path, 10 bit SAR ADC for battery temperature monitor and
-1S battery charger with scalable charge currents.
-
-Required properties:
- - compatible : Should be "rohm,bd70528"
- - reg : I2C slave address.
- - interrupts : The interrupt line the device is connected to.
- - interrupt-controller : To indicate BD70528 acts as an interrupt controller.
- - #interrupt-cells : Should be 2. Usage is compliant to the 2 cells
- variant of ../interrupt-controller/interrupts.txt
- - gpio-controller : To indicate BD70528 acts as a GPIO controller.
- - #gpio-cells : Should be 2. The first cell is the pin number and
- the second cell is used to specify flags. See
- ../gpio/gpio.txt for more information.
- - #clock-cells : Should be 0.
- - regulators: : List of child nodes that specify the regulators.
- Please see ../regulator/rohm,bd70528-regulator.txt
-
-Optional properties:
- - clock-output-names : Should contain name for output clock.
-
-Example:
-/* External oscillator */
-osc: oscillator {
- compatible = "fixed-clock";
- #clock-cells = <1>;
- clock-frequency = <32768>;
- clock-output-names = "osc";
-};
-
-pmic: pmic@4b {
- compatible = "rohm,bd70528";
- reg = <0x4b>;
- interrupt-parent = <&gpio1>;
- interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&osc 0>;
- #clock-cells = <0>;
- clock-output-names = "bd70528-32k-out";
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
-
- regulators {
- buck1: BUCK1 {
- regulator-name = "buck1";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3400000>;
- regulator-boot-on;
- regulator-ramp-delay = <125>;
- };
- buck2: BUCK2 {
- regulator-name = "buck2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-ramp-delay = <125>;
- };
- buck3: BUCK3 {
- regulator-name = "buck3";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-ramp-delay = <250>;
- };
- ldo1: LDO1 {
- regulator-name = "ldo1";
- regulator-min-microvolt = <1650000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- };
- ldo2: LDO2 {
- regulator-name = "ldo2";
- regulator-min-microvolt = <1650000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- };
-
- ldo3: LDO3 {
- regulator-name = "ldo3";
- regulator-min-microvolt = <1650000>;
- regulator-max-microvolt = <3300000>;
- };
- led_ldo1: LED_LDO1 {
- regulator-name = "led_ldo1";
- regulator-min-microvolt = <200000>;
- regulator-max-microvolt = <300000>;
- };
- led_ldo2: LED_LDO2 {
- regulator-name = "led_ldo2";
- regulator-min-microvolt = <200000>;
- regulator-max-microvolt = <300000>;
- };
- };
-};
deleted file mode 100644
@@ -1,68 +0,0 @@
-ROHM BD70528 Power Management Integrated Circuit regulator bindings
-
-Required properties:
- - regulator-name: should be "buck1", "buck2", "buck3", "ldo1", "ldo2", "ldo3",
- "led_ldo1", "led_ldo2"
-
-List of regulators provided by this controller. BD70528 regulators node
-should be sub node of the BD70528 MFD node. See BD70528 MFD bindings at
-Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt
-
-The valid names for BD70528 regulator nodes are:
-BUCK1, BUCK2, BUCK3, LDO1, LDO2, LDO3, LED_LDO1, LED_LDO2
-
-Optional properties:
-- Any optional property defined in bindings/regulator/regulator.txt
-
-Example:
-regulators {
- buck1: BUCK1 {
- regulator-name = "buck1";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3400000>;
- regulator-boot-on;
- regulator-ramp-delay = <125>;
- };
- buck2: BUCK2 {
- regulator-name = "buck2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-ramp-delay = <125>;
- };
- buck3: BUCK3 {
- regulator-name = "buck3";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-ramp-delay = <250>;
- };
- ldo1: LDO1 {
- regulator-name = "ldo1";
- regulator-min-microvolt = <1650000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- };
- ldo2: LDO2 {
- regulator-name = "ldo2";
- regulator-min-microvolt = <1650000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- };
-
- ldo3: LDO3 {
- regulator-name = "ldo3";
- regulator-min-microvolt = <1650000>;
- regulator-max-microvolt = <3300000>;
- };
- led_ldo1: LED_LDO1 {
- regulator-name = "led_ldo1";
- regulator-min-microvolt = <200000>;
- regulator-max-microvolt = <300000>;
- };
- led_ldo2: LED_LDO2 {
- regulator-name = "led_ldo2";
- regulator-min-microvolt = <200000>;
- regulator-max-microvolt = <300000>;
- };
-};