| Message ID | 377681c95dc91d6fc1d2c7b012ed8a71f7565e80.1443431309.git.cyrille.pitchen@atmel.com |
|---|---|
| State | Under Review, archived |
| Headers | show |
On Mon, 28 Sep 2015, Cyrille Pitchen wrote: > This patch documents the DT bindings for the Atmel Flexcom which will be > introduced by sama5d2x SoCs. These bindings will be used by the actual > Flexcom driver to be sent in another patch. > > Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> > Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> > Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> > Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> > --- > .../devicetree/bindings/mfd/atmel-flexcom.txt | 63 ++++++++++++++++++++++ > 1 file changed, 63 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mfd/atmel-flexcom.txt Applied, thanks. > diff --git a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt > new file mode 100644 > index 000000000000..692300117c64 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt > @@ -0,0 +1,63 @@ > +* Device tree bindings for Atmel Flexcom (Flexible Serial Communication Unit) > + > +The Atmel Flexcom is just a wrapper which embeds a SPI controller, an I2C > +controller and an USART. Only one function can be used at a time and is chosen > +at boot time according to the device tree. > + > +Required properties: > +- compatible: Should be "atmel,sama5d2-flexcom" > +- reg: Should be the offset/length value for Flexcom dedicated > + I/O registers (without USART, TWI or SPI registers). > +- clocks: Should be the Flexcom peripheral clock from PMC. > +- #address-cells: Should be <1> > +- #size-cells: Should be <1> > +- ranges: Should be one range for the full I/O register region > + (including USART, TWI and SPI registers). > +- atmel,flexcom-mode: Should be one of the following values: > + - <1> for USART > + - <2> for SPI > + - <3> for I2C > + > +Required child: > +A single available child device of type matching the "atmel,flexcom-mode" > +property. > + > +The phandle provided by the clocks property of the child is the same as one for > +the Flexcom parent. > + > +For other properties, please refer to the documentations of the respective > +device: > +- ../serial/atmel-usart.txt > +- ../spi/spi_atmel.txt > +- ../i2c/i2c-at91.txt > + > +Example: > + > +flexcom@f8034000 { > + compatible = "atmel,sama5d2-flexcom"; > + reg = <0xf8034000 0x200>; > + clocks = <&flx0_clk>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0x0 0xf8034000 0x800>; > + atmel,flexcom-mode = <2>; > + > + spi@400 { > + compatible = "atmel,at91rm9200-spi"; > + reg = <0x400 0x200>; > + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_flx0_default>; > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&flx0_clk>; > + clock-names = "spi_clk"; > + atmel,fifo-size = <32>; > + > + mtd_dataflash@0 { > + compatible = "atmel,at25f512b"; > + reg = <0>; > + spi-max-frequency = <20000000>; > + }; > + }; > +};
diff --git a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt new file mode 100644 index 000000000000..692300117c64 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt @@ -0,0 +1,63 @@ +* Device tree bindings for Atmel Flexcom (Flexible Serial Communication Unit) + +The Atmel Flexcom is just a wrapper which embeds a SPI controller, an I2C +controller and an USART. Only one function can be used at a time and is chosen +at boot time according to the device tree. + +Required properties: +- compatible: Should be "atmel,sama5d2-flexcom" +- reg: Should be the offset/length value for Flexcom dedicated + I/O registers (without USART, TWI or SPI registers). +- clocks: Should be the Flexcom peripheral clock from PMC. +- #address-cells: Should be <1> +- #size-cells: Should be <1> +- ranges: Should be one range for the full I/O register region + (including USART, TWI and SPI registers). +- atmel,flexcom-mode: Should be one of the following values: + - <1> for USART + - <2> for SPI + - <3> for I2C + +Required child: +A single available child device of type matching the "atmel,flexcom-mode" +property. + +The phandle provided by the clocks property of the child is the same as one for +the Flexcom parent. + +For other properties, please refer to the documentations of the respective +device: +- ../serial/atmel-usart.txt +- ../spi/spi_atmel.txt +- ../i2c/i2c-at91.txt + +Example: + +flexcom@f8034000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf8034000 0x200>; + clocks = <&flx0_clk>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8034000 0x800>; + atmel,flexcom-mode = <2>; + + spi@400 { + compatible = "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx0_default>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&flx0_clk>; + clock-names = "spi_clk"; + atmel,fifo-size = <32>; + + mtd_dataflash@0 { + compatible = "atmel,at25f512b"; + reg = <0>; + spi-max-frequency = <20000000>; + }; + }; +};