diff mbox series

[v3,2/4] dt-bindings: Add AST2700 bindings

Message ID 20240916091039.3584505-3-ryan_chen@aspeedtech.com
State Changes Requested
Headers show
Series Add support for AST2700 clk driver | expand

Checks

Context Check Description
robh/checkpatch success
robh/patch-applied success

Commit Message

Ryan Chen Sept. 16, 2024, 9:10 a.m. UTC
Add reset, clock dt bindings for AST2700.

Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
---
 .../dt-bindings/clock/aspeed,ast2700-clk.h    | 163 ++++++++++++++++++
 .../dt-bindings/reset/aspeed,ast2700-reset.h  | 124 +++++++++++++
 2 files changed, 287 insertions(+)
 create mode 100644 include/dt-bindings/clock/aspeed,ast2700-clk.h
 create mode 100644 include/dt-bindings/reset/aspeed,ast2700-reset.h

Comments

Krzysztof Kozlowski Sept. 16, 2024, 10:06 a.m. UTC | #1
On 16/09/2024 11:10, Ryan Chen wrote:
> Add reset, clock dt bindings for AST2700.
> 
> Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
> ---
>  .../dt-bindings/clock/aspeed,ast2700-clk.h    | 163 ++++++++++++++++++
>  .../dt-bindings/reset/aspeed,ast2700-reset.h  | 124 +++++++++++++
>  2 files changed, 287 insertions(+)

This is supposed to be part of the commit adding these bindings. You got
this comment already, didn't you?

>  create mode 100644 include/dt-bindings/clock/aspeed,ast2700-clk.h
>  create mode 100644 include/dt-bindings/reset/aspeed,ast2700-reset.h
> 
> diff --git a/include/dt-bindings/clock/aspeed,ast2700-clk.h b/include/dt-bindings/clock/aspeed,ast2700-clk.h
> new file mode 100644
> index 000000000000..63021af3caf5
> --- /dev/null
> +++ b/include/dt-bindings/clock/aspeed,ast2700-clk.h

Use compatible as filename.


Best regards,
Krzysztof
Ryan Chen Sept. 19, 2024, 6:01 a.m. UTC | #2
> Subject: Re: [PATCH v3 2/4] dt-bindings: Add AST2700 bindings
> 
> On 16/09/2024 11:10, Ryan Chen wrote:
> > Add reset, clock dt bindings for AST2700.
> >
> > Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
> > ---
> >  .../dt-bindings/clock/aspeed,ast2700-clk.h    | 163
> ++++++++++++++++++
> >  .../dt-bindings/reset/aspeed,ast2700-reset.h  | 124 +++++++++++++
> >  2 files changed, 287 insertions(+)
> 
> This is supposed to be part of the commit adding these bindings. You got this
> comment already, didn't you?

Sorry, I may mis-understood your point in previous.
I think you are ask, yaml and dt-binding header to be the same patch, right?

> 
> >  create mode 100644 include/dt-bindings/clock/aspeed,ast2700-clk.h
> >  create mode 100644 include/dt-bindings/reset/aspeed,ast2700-reset.h
> >
> > diff --git a/include/dt-bindings/clock/aspeed,ast2700-clk.h
> > b/include/dt-bindings/clock/aspeed,ast2700-clk.h
> > new file mode 100644
> > index 000000000000..63021af3caf5
> > --- /dev/null
> > +++ b/include/dt-bindings/clock/aspeed,ast2700-clk.h
> 
> Use compatible as filename.
Modify from aspeed,ast2700-clk.h to aspeed, clk-ast2700.h, is it ok?
How about the aspeed,ast2700-reset.h file name is ok ?
> 
> 
> Best regards,
> Krzysztof
Krzysztof Kozlowski Sept. 19, 2024, 6:58 a.m. UTC | #3
On 19/09/2024 08:01, Ryan Chen wrote:
>> Subject: Re: [PATCH v3 2/4] dt-bindings: Add AST2700 bindings
>>
>> On 16/09/2024 11:10, Ryan Chen wrote:
>>> Add reset, clock dt bindings for AST2700.
>>>
>>> Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
>>> ---
>>>  .../dt-bindings/clock/aspeed,ast2700-clk.h    | 163
>> ++++++++++++++++++
>>>  .../dt-bindings/reset/aspeed,ast2700-reset.h  | 124 +++++++++++++
>>>  2 files changed, 287 insertions(+)
>>
>> This is supposed to be part of the commit adding these bindings. You got this
>> comment already, didn't you?
> 
> Sorry, I may mis-understood your point in previous.
> I think you are ask, yaml and dt-binding header to be the same patch, right?

It is one patch adding the binding for the device and headers.

> 
>>
>>>  create mode 100644 include/dt-bindings/clock/aspeed,ast2700-clk.h
>>>  create mode 100644 include/dt-bindings/reset/aspeed,ast2700-reset.h
>>>
>>> diff --git a/include/dt-bindings/clock/aspeed,ast2700-clk.h
>>> b/include/dt-bindings/clock/aspeed,ast2700-clk.h
>>> new file mode 100644
>>> index 000000000000..63021af3caf5
>>> --- /dev/null
>>> +++ b/include/dt-bindings/clock/aspeed,ast2700-clk.h
>>
>> Use compatible as filename.
> Modify from aspeed,ast2700-clk.h to aspeed, clk-ast2700.h, is it ok?
> How about the aspeed,ast2700-reset.h file name is ok ?

No. For both use the same filename, so the full compatible. FULL.

Best regards,
Krzysztof
Ryan Chen Sept. 19, 2024, 7:15 a.m. UTC | #4
> Subject: Re: [PATCH v3 2/4] dt-bindings: Add AST2700 bindings
> 
> On 19/09/2024 08:01, Ryan Chen wrote:
> >> Subject: Re: [PATCH v3 2/4] dt-bindings: Add AST2700 bindings
> >>
> >> On 16/09/2024 11:10, Ryan Chen wrote:
> >>> Add reset, clock dt bindings for AST2700.
> >>>
> >>> Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
> >>> ---
> >>>  .../dt-bindings/clock/aspeed,ast2700-clk.h    | 163
> >> ++++++++++++++++++
> >>>  .../dt-bindings/reset/aspeed,ast2700-reset.h  | 124 +++++++++++++
> >>>  2 files changed, 287 insertions(+)
> >>
> >> This is supposed to be part of the commit adding these bindings. You
> >> got this comment already, didn't you?
> >
> > Sorry, I may mis-understood your point in previous.
> > I think you are ask, yaml and dt-binding header to be the same patch, right?
> 
> It is one patch adding the binding for the device and headers.
Thanks.
> 
> >
> >>
> >>>  create mode 100644 include/dt-bindings/clock/aspeed,ast2700-clk.h
> >>>  create mode 100644 include/dt-bindings/reset/aspeed,ast2700-reset.h
> >>>
> >>> diff --git a/include/dt-bindings/clock/aspeed,ast2700-clk.h
> >>> b/include/dt-bindings/clock/aspeed,ast2700-clk.h
> >>> new file mode 100644
> >>> index 000000000000..63021af3caf5
> >>> --- /dev/null
> >>> +++ b/include/dt-bindings/clock/aspeed,ast2700-clk.h
> >>
> >> Use compatible as filename.
> > Modify from aspeed,ast2700-clk.h to aspeed, clk-ast2700.h, is it ok?
> > How about the aspeed,ast2700-reset.h file name is ok ?
> 
> No. For both use the same filename, so the full compatible. FULL.

Do you mean remove aspeed,ast2700-reset.h?
And move reset information into "aspeed, clk-ast2700.h"
> 
> Best regards,
> Krzysztof
Krzysztof Kozlowski Sept. 19, 2024, 10:30 a.m. UTC | #5
On 19/09/2024 09:15, Ryan Chen wrote:
>>>>
>>>>>  create mode 100644 include/dt-bindings/clock/aspeed,ast2700-clk.h
>>>>>  create mode 100644 include/dt-bindings/reset/aspeed,ast2700-reset.h
>>>>>
>>>>> diff --git a/include/dt-bindings/clock/aspeed,ast2700-clk.h
>>>>> b/include/dt-bindings/clock/aspeed,ast2700-clk.h
>>>>> new file mode 100644
>>>>> index 000000000000..63021af3caf5
>>>>> --- /dev/null
>>>>> +++ b/include/dt-bindings/clock/aspeed,ast2700-clk.h
>>>>
>>>> Use compatible as filename.
>>> Modify from aspeed,ast2700-clk.h to aspeed, clk-ast2700.h, is it ok?
>>> How about the aspeed,ast2700-reset.h file name is ok ?
>>
>> No. For both use the same filename, so the full compatible. FULL.
> 
> Do you mean remove aspeed,ast2700-reset.h?
> And move reset information into "aspeed, clk-ast2700.h"
>>

I did not say that. "For both" means for both files, so you can keep
both files.


Best regards,
Krzysztof
Ryan Chen Sept. 20, 2024, 7:31 a.m. UTC | #6
> Subject: Re: [PATCH v3 2/4] dt-bindings: Add AST2700 bindings
> 
> On 19/09/2024 09:15, Ryan Chen wrote:
> >>>>
> >>>>>  create mode 100644 include/dt-bindings/clock/aspeed,ast2700-clk.h
> >>>>>  create mode 100644
> >>>>> include/dt-bindings/reset/aspeed,ast2700-reset.h
> >>>>>
> >>>>> diff --git a/include/dt-bindings/clock/aspeed,ast2700-clk.h
> >>>>> b/include/dt-bindings/clock/aspeed,ast2700-clk.h
> >>>>> new file mode 100644
> >>>>> index 000000000000..63021af3caf5
> >>>>> --- /dev/null
> >>>>> +++ b/include/dt-bindings/clock/aspeed,ast2700-clk.h
> >>>>
> >>>> Use compatible as filename.
> >>> Modify from aspeed,ast2700-clk.h to aspeed, clk-ast2700.h, is it ok?
> >>> How about the aspeed,ast2700-reset.h file name is ok ?
> >>
> >> No. For both use the same filename, so the full compatible. FULL.
> >
> > Do you mean remove aspeed,ast2700-reset.h?
> > And move reset information into "aspeed, clk-ast2700.h"
> >>
> 
> I did not say that. "For both" means for both files, so you can keep both files.
> 
So, I think you want both file use the same name right? To be following
include/dt-bindings/clock/aspeed,ast2700-scu.h
include/dt-bindings/reset/aspeed,ast2700-scu.h

> 
> Best regards,
> Krzysztof
diff mbox series

Patch

diff --git a/include/dt-bindings/clock/aspeed,ast2700-clk.h b/include/dt-bindings/clock/aspeed,ast2700-clk.h
new file mode 100644
index 000000000000..63021af3caf5
--- /dev/null
+++ b/include/dt-bindings/clock/aspeed,ast2700-clk.h
@@ -0,0 +1,163 @@ 
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Device Tree binding constants for AST2700 clock controller.
+ *
+ * Copyright (c) 2024 Aspeed Technology Inc.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_AST2700_H
+#define __DT_BINDINGS_CLOCK_AST2700_H
+
+/* SOC0 clk */
+#define SCU0_CLKIN		0
+#define SCU0_CLK_24M		1
+#define SCU0_CLK_192M		2
+#define SCU0_CLK_UART		3
+#define SCU0_CLK_UART_DIV13	3
+#define SCU0_CLK_PSP		4
+#define SCU0_CLK_HPLL		5
+#define SCU0_CLK_HPLL_DIV2	6
+#define SCU0_CLK_HPLL_DIV4	7
+#define SCU0_CLK_HPLL_DIV_AHB	8
+#define SCU0_CLK_DPLL		9
+#define SCU0_CLK_MPLL		10
+#define SCU0_CLK_MPLL_DIV2	11
+#define SCU0_CLK_MPLL_DIV4	12
+#define SCU0_CLK_MPLL_DIV8	13
+#define SCU0_CLK_MPLL_DIV_AHB	14
+#define SCU0_CLK_D0		15
+#define SCU0_CLK_D1		16
+#define SCU0_CLK_CRT0		17
+#define SCU0_CLK_CRT1		18
+#define SCU0_CLK_MPHY		19
+#define SCU0_CLK_AXI0		20
+#define SCU0_CLK_AXI1		21
+#define SCU0_CLK_AHB		22
+#define SCU0_CLK_APB		23
+#define SCU0_CLK_UART4		24
+#define SCU0_CLK_EMMCMUX	25
+#define SCU0_CLK_EMMC		26
+#define SCU0_CLK_U2PHY_CLK12M	27
+#define SCU0_CLK_U2PHY_REFCLK	28
+
+/* SOC0 clk-gate */
+#define SCU0_CLK_GATE_MCLK	29
+#define SCU0_CLK_GATE_ECLK	30
+#define SCU0_CLK_GATE_2DCLK	31
+#define SCU0_CLK_GATE_VCLK	32
+#define SCU0_CLK_GATE_BCLK	33
+#define SCU0_CLK_GATE_VGA0CLK	34
+#define SCU0_CLK_GATE_REFCLK	35
+#define SCU0_CLK_GATE_PORTBUSB2CLK	36
+#define SCU0_CLK_GATE_UHCICLK	37
+#define SCU0_CLK_GATE_VGA1CLK	38
+#define SCU0_CLK_GATE_DDRPHYCLK	39
+#define SCU0_CLK_GATE_E2M0CLK	40
+#define SCU0_CLK_GATE_HACCLK	41
+#define SCU0_CLK_GATE_PORTAUSB2CLK	42
+#define SCU0_CLK_GATE_UART4CLK	43
+#define SCU0_CLK_GATE_SLICLK	44
+#define SCU0_CLK_GATE_DACCLK	45
+#define SCU0_CLK_GATE_DP	46
+#define SCU0_CLK_GATE_E2M1CLK	47
+#define SCU0_CLK_GATE_CRT0CLK	48
+#define SCU0_CLK_GATE_CRT1CLK	49
+#define SCU0_CLK_GATE_ECDSACLK	50
+#define SCU0_CLK_GATE_RSACLK	51
+#define SCU0_CLK_GATE_RVAS0CLK	52
+#define SCU0_CLK_GATE_UFSCLK	53
+#define SCU0_CLK_GATE_EMMCCLK	54
+#define SCU0_CLK_GATE_RVAS1CLK	55
+
+/* SOC1 clk */
+#define SCU1_CLKIN		0
+#define SCU1_CLK_HPLL		1
+#define SCU1_CLK_APLL		2
+#define SCU1_CLK_APLL_DIV2	3
+#define SCU1_CLK_APLL_DIV4	4
+#define SCU1_CLK_DPLL		5
+#define SCU1_CLK_UXCLK		6
+#define SCU1_CLK_HUXCLK		7
+#define SCU1_CLK_UARTX		8
+#define SCU1_CLK_HUARTX		9
+#define SCU1_CLK_AHB		10
+#define SCU1_CLK_APB		11
+#define SCU1_CLK_UART0		12
+#define SCU1_CLK_UART1		13
+#define SCU1_CLK_UART2		14
+#define SCU1_CLK_UART3		15
+#define SCU1_CLK_UART5		16
+#define SCU1_CLK_UART6		17
+#define SCU1_CLK_UART7		18
+#define SCU1_CLK_UART8		19
+#define SCU1_CLK_UART9		20
+#define SCU1_CLK_UART10		21
+#define SCU1_CLK_UART11		22
+#define SCU1_CLK_UART12		23
+#define SCU1_CLK_UART13		24
+#define SCU1_CLK_UART14		25
+#define SCU1_CLK_APLL_DIVN	26
+#define SCU1_CLK_SDMUX		27
+#define SCU1_CLK_SDCLK		28
+#define SCU1_CLK_RMII		29
+#define SCU1_CLK_RGMII		30
+#define SCU1_CLK_MACHCLK	31
+#define SCU1_CLK_MAC0RCLK	32
+#define SCU1_CLK_MAC1RCLK	33
+#define SCU1_CLK_CAN		34
+
+/* SOC1 clk gate */
+#define SCU1_CLK_GATE_LCLK0		35
+#define SCU1_CLK_GATE_LCLK1		36
+#define SCU1_CLK_GATE_ESPI0CLK		37
+#define SCU1_CLK_GATE_ESPI1CLK		38
+#define SCU1_CLK_GATE_SDCLK		39
+#define SCU1_CLK_GATE_IPEREFCLK		40
+#define SCU1_CLK_GATE_REFCLK		41
+#define SCU1_CLK_GATE_LPCHCLK		42
+#define SCU1_CLK_GATE_MAC0CLK		43
+#define SCU1_CLK_GATE_MAC1CLK		44
+#define SCU1_CLK_GATE_MAC2CLK		45
+#define SCU1_CLK_GATE_UART0CLK		46
+#define SCU1_CLK_GATE_UART1CLK		47
+#define SCU1_CLK_GATE_UART2CLK		48
+#define SCU1_CLK_GATE_UART3CLK		49
+#define SCU1_CLK_GATE_I2CCLK		50
+#define SCU1_CLK_GATE_I3C0CLK		51
+#define SCU1_CLK_GATE_I3C1CLK		52
+#define SCU1_CLK_GATE_I3C2CLK		53
+#define SCU1_CLK_GATE_I3C3CLK		54
+#define SCU1_CLK_GATE_I3C4CLK		55
+#define SCU1_CLK_GATE_I3C5CLK		56
+#define SCU1_CLK_GATE_I3C6CLK		57
+#define SCU1_CLK_GATE_I3C7CLK		58
+#define SCU1_CLK_GATE_I3C8CLK		59
+#define SCU1_CLK_GATE_I3C9CLK		60
+#define SCU1_CLK_GATE_I3C10CLK		61
+#define SCU1_CLK_GATE_I3C11CLK		62
+#define SCU1_CLK_GATE_I3C12CLK		63
+#define SCU1_CLK_GATE_I3C13CLK		64
+#define SCU1_CLK_GATE_I3C14CLK		65
+#define SCU1_CLK_GATE_I3C15CLK		66
+#define SCU1_CLK_GATE_UART5CLK		67
+#define SCU1_CLK_GATE_UART6CLK		68
+#define SCU1_CLK_GATE_UART7CLK		69
+#define SCU1_CLK_GATE_UART8CLK		70
+#define SCU1_CLK_GATE_UART9CLK		71
+#define SCU1_CLK_GATE_UART10CLK		72
+#define SCU1_CLK_GATE_UART11CLK		73
+#define SCU1_CLK_GATE_UART12CLK		74
+#define SCU1_CLK_GATE_FSICLK		75
+#define SCU1_CLK_GATE_LTPIPHYCLK	76
+#define SCU1_CLK_GATE_LTPICLK		77
+#define SCU1_CLK_GATE_VGALCLK		78
+#define SCU1_CLK_GATE_UHCICLK		79
+#define SCU1_CLK_GATE_CANCLK		80
+#define SCU1_CLK_GATE_PCICLK		81
+#define SCU1_CLK_GATE_SLICLK		82
+#define SCU1_CLK_GATE_E2MCLK		83
+#define SCU1_CLK_GATE_PORTCUSB2CLK	84
+#define SCU1_CLK_GATE_PORTDUSB2CLK	85
+#define SCU1_CLK_GATE_LTPI1TXCLK	86
+
+#endif
diff --git a/include/dt-bindings/reset/aspeed,ast2700-reset.h b/include/dt-bindings/reset/aspeed,ast2700-reset.h
new file mode 100644
index 000000000000..c5fbb91d9341
--- /dev/null
+++ b/include/dt-bindings/reset/aspeed,ast2700-reset.h
@@ -0,0 +1,124 @@ 
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Device Tree binding constants for AST2700 reset controller.
+ *
+ * Copyright (c) 2024 Aspeed Technology Inc.
+ */
+
+#ifndef _MACH_ASPEED_AST2700_RESET_H_
+#define _MACH_ASPEED_AST2700_RESET_H_
+
+/* SOC0 */
+#define SCU0_RESET_SDRAM		(0)
+#define SCU0_RESET_DDRPHY		(1)
+#define SCU0_RESET_RSA		(2)
+#define SCU0_RESET_SHA3		(3)
+#define SCU0_RESET_HACE		(4)
+#define SCU0_RESET_SOC		(5)
+#define SCU0_RESET_VIDEO		(6)
+#define SCU0_RESET_2D			(7)
+#define SCU0_RESET_PCIS		(8)
+#define SCU0_RESET_RVAS0		(9)
+#define SCU0_RESET_RVAS1		(10)
+#define SCU0_RESET_SM3		(11)
+#define SCU0_RESET_SM4		(12)
+#define SCU0_RESET_CRT0		(13)
+#define SCU0_RESET_ECC		(14)
+#define SCU0_RESET_DP_PCI		(15)
+#define SCU0_RESET_UFS		(16)
+#define SCU0_RESET_EMMC		(17)
+#define SCU0_RESET_PCIE1RST		(18)
+#define SCU0_RESET_PCIE1RSTOE	(19)
+#define SCU0_RESET_PCIE0RST		(20)
+#define SCU0_RESET_PCIE0RSTOE	(21)
+#define SCU0_RESET_JTAG			(22)
+#define SCU0_RESET_MCTP0		(23)
+#define SCU0_RESET_MCTP1		(24)
+#define SCU0_RESET_XDMA0		(25)
+#define SCU0_RESET_XDMA1		(26)
+#define SCU0_RESET_H2X1		(27)
+#define SCU0_RESET_DP			(28)
+#define SCU0_RESET_DP_MCU		(29)
+#define SCU0_RESET_SSP		(30)
+#define SCU0_RESET_H2X0		(31)
+#define SCU0_RESET_PORTA_VHUB		(32)
+#define SCU0_RESET_PORTA_PHY3		(33)
+#define SCU0_RESET_PORTA_XHCI		(34)
+#define SCU0_RESET_PORTB_VHUB		(35)
+#define SCU0_RESET_PORTB_PHY3		(36)
+#define SCU0_RESET_PORTB_XHCI		(37)
+#define SCU0_RESET_PORTA_VHUB_EHCI	(38)
+#define SCU0_RESET_PORTB_VHUB_EHCI	(39)
+#define SCU0_RESET_UHCI		(40)
+#define SCU0_RESET_TSP		(41)
+#define SCU0_RESET_E2M0		(42)
+#define SCU0_RESET_E2M1		(43)
+#define SCU0_RESET_VLINK		(44)
+
+/* SOC1 */
+#define SCU1_RESET_LPC0		(0)
+#define SCU1_RESET_LPC1		(1)
+#define SCU1_RESET_MII		(2)
+#define SCU1_RESET_PECI		(3)
+#define SCU1_RESET_PWM		(4)
+#define SCU1_RESET_MAC0		(5)
+#define SCU1_RESET_MAC1		(6)
+#define SCU1_RESET_MAC2		(7)
+#define SCU1_RESET_ADC		(8)
+#define SCU1_RESET_SD			(9)
+#define SCU1_RESET_ESPI0		(10)
+#define SCU1_RESET_ESPI1		(11)
+#define SCU1_RESET_JTAG1		(12)
+#define SCU1_RESET_SPI0		(13)
+#define SCU1_RESET_SPI1		(14)
+#define SCU1_RESET_SPI2		(15)
+#define SCU1_RESET_I3C0		(16)
+#define SCU1_RESET_I3C1		(17)
+#define SCU1_RESET_I3C2		(18)
+#define SCU1_RESET_I3C3		(19)
+#define SCU1_RESET_I3C4		(20)
+#define SCU1_RESET_I3C5		(21)
+#define SCU1_RESET_I3C6		(22)
+#define SCU1_RESET_I3C7		(23)
+#define SCU1_RESET_I3C8		(24)
+#define SCU1_RESET_I3C9		(25)
+#define SCU1_RESET_I3C10		(26)
+#define SCU1_RESET_I3C11		(27)
+#define SCU1_RESET_I3C12		(28)
+#define SCU1_RESET_I3C13		(29)
+#define SCU1_RESET_I3C14		(30)
+#define SCU1_RESET_I3C15		(31)
+#define SCU1_RESET_MCU0		(32)
+#define SCU1_RESET_MCU1		(33)
+#define SCU1_RESET_H2A_SPI1		(34)
+#define SCU1_RESET_H2A_SPI2		(35)
+#define SCU1_RESET_UART0		(36)
+#define SCU1_RESET_UART1		(37)
+#define SCU1_RESET_UART2		(38)
+#define SCU1_RESET_UART3		(39)
+#define SCU1_RESET_I2C_FILTER		(40)
+#define SCU1_RESET_CALIPTRA		(41)
+#define SCU1_RESET_XDMA			(42)
+#define SCU1_RESET_FSI		(43)
+#define SCU1_RESET_CAN		(44)
+#define SCU1_RESET_MCTP		(45)
+#define SCU1_RESET_I2C		(46)
+#define SCU1_RESET_UART6		(47)
+#define SCU1_RESET_UART7		(48)
+#define SCU1_RESET_UART8		(49)
+#define SCU1_RESET_UART9		(50)
+#define SCU1_RESET_LTPI0		(51)
+#define SCU1_RESET_VGAL		(52)
+#define SCU1_RESET_LTPI1		(53)
+#define SCU1_RESET_ACE		(54)
+#define SCU1_RESET_E2M		(55)
+#define SCU1_RESET_UHCI		(56)
+#define SCU1_RESET_PORTC_USB2UART	(57)
+#define SCU1_RESET_PORTC_VHUB_EHCI	(58)
+#define SCU1_RESET_PORTD_USB2UART	(59)
+#define SCU1_RESET_PORTD_VHUB_EHCI	(60)
+#define SCU1_RESET_H2X		(61)
+#define SCU1_RESET_I3CDMA             (62)
+#define SCU1_RESET_PCIE2RST	(63)
+
+#endif  /* _MACH_ASPEED_AST2700_RESET_H_ */