| Message ID | 20240906165322.1745328-2-lanzano.alex@gmail.com |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | Add I2C driver for Bosch BMI270 IMU | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success | |
| robh/patch-applied | success | |
| robh/dtbs-check | warning | build log |
| robh/dt-meta-schema | success |
On 06/09/2024 18:52, Alex Lanzano wrote: > Add device tree bindings for the bmi270 IMU > > Signed-off-by: Alex Lanzano <lanzano.alex@gmail.com> > --- Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
On Fri, 6 Sep 2024 12:52:50 -0400 Alex Lanzano <lanzano.alex@gmail.com> wrote: > Add device tree bindings for the bmi270 IMU > > Signed-off-by: Alex Lanzano <lanzano.alex@gmail.com> Hi Alex One totally trivial thing inline. If nothing comes up in driver I'll tidy this up whilst applying Jonathan > --- > .../bindings/iio/imu/bosch,bmi270.yaml | 77 +++++++++++++++++++ > 1 file changed, 77 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/imu/bosch,bmi270.yaml > > diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bmi270.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bmi270.yaml > new file mode 100644 > index 000000000000..7de35b9bfa2e > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/imu/bosch,bmi270.yaml > @@ -0,0 +1,77 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/iio/imu/bosch,bmi270.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Bosch BMI270 6-Axis IMU > + > +maintainers: > + - Alex Lanzano <lanzano.alex@gmail.com> > + > +description: | > + BMI270 is a 6-axis inertial measurement unit that can measure acceleration and > + angular velocity. The sensor also supports configurable interrupt events such > + as motion, step counter, and wrist motion gestures. The sensor can communicate > + I2C or SPI. > + https://www.bosch-sensortec.com/products/motion-sensors/imus/bmi270/ > + > +properties: > + compatible: > + const: bosch,bmi270 > + > + reg: > + maxItems: 1 > + > + vdd-supply: true > + vddio-supply: true > + > + interrupts: > + minItems: 1 > + maxItems: 2 > + > + interrupt-names: > + minItems: 1 > + maxItems: 2 > + items: > + enum: > + - INT1 > + - INT2 > + > + drive-open-drain: > + description: > + set if the specified interrupt pin should be configured as pins Even if they are configurable separately we've previously argued that it is very unlikely a board designer would want one open drain and the other push-pull. So simply making the description plural should be enough. > + open drain. If not set, defaults to push-pull. > + > + mount-matrix: > + description: > + an optional 3x3 mounting rotation matrix. > + > +required: > + - compatible > + - reg > + - vdd-supply > + - vddio-supply > + > +allOf: > + - $ref: /schemas/spi/spi-peripheral-props.yaml# > + > +unevaluatedProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + imu@68 { > + compatible = "bosch,bmi270"; > + reg = <0x68>; > + vdd-supply = <&vdd>; > + vddio-supply = <&vddio>; > + interrupt-parent = <&gpio1>; > + interrupts = <16 IRQ_TYPE_EDGE_RISING>; > + interrupt-names = "INT1"; > + }; > + };
On Sat, Sep 07, 2024 at 04:47:43PM GMT, Jonathan Cameron wrote: > On Fri, 6 Sep 2024 12:52:50 -0400 > Alex Lanzano <lanzano.alex@gmail.com> wrote: > > > Add device tree bindings for the bmi270 IMU > > > > Signed-off-by: Alex Lanzano <lanzano.alex@gmail.com> > Hi Alex > > One totally trivial thing inline. If nothing comes up in > driver I'll tidy this up whilst applying > > Jonathan > Will apply in v3! > > --- > > .../bindings/iio/imu/bosch,bmi270.yaml | 77 +++++++++++++++++++ > > 1 file changed, 77 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/iio/imu/bosch,bmi270.yaml > > > > diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bmi270.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bmi270.yaml > > new file mode 100644 > > index 000000000000..7de35b9bfa2e > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/iio/imu/bosch,bmi270.yaml > > @@ -0,0 +1,77 @@ > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/iio/imu/bosch,bmi270.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Bosch BMI270 6-Axis IMU > > + > > +maintainers: > > + - Alex Lanzano <lanzano.alex@gmail.com> > > + > > +description: | > > + BMI270 is a 6-axis inertial measurement unit that can measure acceleration and > > + angular velocity. The sensor also supports configurable interrupt events such > > + as motion, step counter, and wrist motion gestures. The sensor can communicate > > + I2C or SPI. > > + https://www.bosch-sensortec.com/products/motion-sensors/imus/bmi270/ > > + > > +properties: > > + compatible: > > + const: bosch,bmi270 > > + > > + reg: > > + maxItems: 1 > > + > > + vdd-supply: true > > + vddio-supply: true > > + > > + interrupts: > > + minItems: 1 > > + maxItems: 2 > > + > > + interrupt-names: > > + minItems: 1 > > + maxItems: 2 > > + items: > > + enum: > > + - INT1 > > + - INT2 > > + > > + drive-open-drain: > > + description: > > + set if the specified interrupt pin should be configured as > > pins > > Even if they are configurable separately we've previously argued that > it is very unlikely a board designer would want one open drain > and the other push-pull. So simply making the description plural > should be enough. > Will Fix in v3! > > + open drain. If not set, defaults to push-pull. > > + > > + mount-matrix: > > + description: > > + an optional 3x3 mounting rotation matrix. > > + > > +required: > > + - compatible > > + - reg > > + - vdd-supply > > + - vddio-supply > > + > > +allOf: > > + - $ref: /schemas/spi/spi-peripheral-props.yaml# > > + > > +unevaluatedProperties: false > > + > > +examples: > > + - | > > + #include <dt-bindings/interrupt-controller/irq.h> > > + i2c { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + imu@68 { > > + compatible = "bosch,bmi270"; > > + reg = <0x68>; > > + vdd-supply = <&vdd>; > > + vddio-supply = <&vddio>; > > + interrupt-parent = <&gpio1>; > > + interrupts = <16 IRQ_TYPE_EDGE_RISING>; > > + interrupt-names = "INT1"; > > + }; > > + }; Thanks so much for the review! Best regards, Alex
diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bmi270.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bmi270.yaml new file mode 100644 index 000000000000..7de35b9bfa2e --- /dev/null +++ b/Documentation/devicetree/bindings/iio/imu/bosch,bmi270.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/imu/bosch,bmi270.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bosch BMI270 6-Axis IMU + +maintainers: + - Alex Lanzano <lanzano.alex@gmail.com> + +description: | + BMI270 is a 6-axis inertial measurement unit that can measure acceleration and + angular velocity. The sensor also supports configurable interrupt events such + as motion, step counter, and wrist motion gestures. The sensor can communicate + I2C or SPI. + https://www.bosch-sensortec.com/products/motion-sensors/imus/bmi270/ + +properties: + compatible: + const: bosch,bmi270 + + reg: + maxItems: 1 + + vdd-supply: true + vddio-supply: true + + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + minItems: 1 + maxItems: 2 + items: + enum: + - INT1 + - INT2 + + drive-open-drain: + description: + set if the specified interrupt pin should be configured as + open drain. If not set, defaults to push-pull. + + mount-matrix: + description: + an optional 3x3 mounting rotation matrix. + +required: + - compatible + - reg + - vdd-supply + - vddio-supply + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + imu@68 { + compatible = "bosch,bmi270"; + reg = <0x68>; + vdd-supply = <&vdd>; + vddio-supply = <&vddio>; + interrupt-parent = <&gpio1>; + interrupts = <16 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "INT1"; + }; + };
Add device tree bindings for the bmi270 IMU Signed-off-by: Alex Lanzano <lanzano.alex@gmail.com> --- .../bindings/iio/imu/bosch,bmi270.yaml | 77 +++++++++++++++++++ 1 file changed, 77 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/imu/bosch,bmi270.yaml